Quick Start Guide P19 Hospital Grade television
Contents
1. e If smoke odors or noises are emitting from the unit disconnect the AC power cord immediately PLACEMENT Avoid placing the unit in surroundings with Direct sunlight or heat sources like radiators or ovens High temperature over 40 C or high humidity over 90 Excessive dust Electro static effect Vibration impact or tilted surfaces Otherwise the internal parts may be damaged NON USE PERIODS e Turn off the power when the unit is not used e It should be unplugged from the AC outlet when the unit is idle for a long period of time DVD PLAYER e Because of high voltage inside the unit touching internal parts is dangerous and may lead to serious damage to the unit and even personal injury e DONOT attempt to disassemble this unit under any circumstance e Only puta DVD or CD into the slot STACKING Place the unit in a horizontal place and DO NOT lay anything heavy on it PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 937 743 6010 FX 1 937 743 5664 Document Number PD1961127R1 DOC Ss An Communication PDI P19LCDC Quick Start Guide Page 3 of 12 Systems Inc Better Solutions Are Within Reach INSTALLATION INSTRUCTIONS CONDENSATION Moisture may condense on the lens if placed in a steamy or very humid room or if moved from a cold environment to a warm one If moisture appears inside this unit it may not operate normally In this case unplug the power cord and wait for about2. 1 hour to let it dry A RAIN AND MOISTURE CAUTION DO NOT defeat the safety of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two plates and a third grounding prong The wide blade or the third prong is provided for your safety If the plug does not fit into your outlet consult an electrician 1 WARNING To avoid the hazards of fire or electrical shock DO NOT expose this TV to rain or moisture INSTALLATION DO NOT block any ventilation openings DO NOT install near any heat source such as radiators heat registers stoves or other apparatus that produce heat WET LOCATION The TV SHOULD NOT be exposed to dripping or splashing Objects filled with liquids such as vases SHOULD NOT be placed on the TV OXYGEN ENVIRONMENT 1 WARNING DO NOT use in an oxygen tent or an oxygen chamber Such use can cause a fire hazard CLEANING AND DISINFECTION Clean the exterior of this TV by removing dust with a lint free cloth 1 CAUTION DO NOT use abrasive or chemical cleaning agents Clean only with a dry cloth PRODUCT MODIFICATION DO NOT attempt to modify this product in any way without written authorization Unauthorized modification could void the user s authority to operate this product OVERHEAD FALLING HAZARD WARNING To prevent injury this apparatus must be securely attached to the wall in accordance with the installation instructions TVs can po
3. DVD Module installed it needs to be enabled by using the programming menus After the DVD Module is enabled it is ready for use Service Level e TY Enable APO Ficture Composite Video Enable APO Sound S VIDEO Enable APO Chane k Component Enable APO Features HDA Enable APO OSD Language i PC ANALOG Enable APO Sources FRI RADIO Enabled FM RADIO SLOT DYD Enable APO Power on Source Last Postion A Exit SETUP Plug the Power Cable into the wall outlet Turn on the TV Press SETUP on the programming remote PD108 420 From the SETUP menu press A or YW to highlight Sources Press gt to select it Press W to highlight SLOT DVD Press lt or gt to change the source status to Enabled APO To exit press SETUP until the programming menus disappear eo oe SS PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 937 743 6010 FX 1 937 743 5664 Document Number PD1961127R1 DOC mee a onmunteation PDI P19LCDC Quick Start Guide P 8e 12of 12 Systems Inc Better Solutions Are Within Reach INSTALLATION INSTRUCTIONS Disc Playback Patients may use a compatible pillow speaker or a user remote PD108 427 NOTE Some pillow speakers may not have all the DVD control functions that are listed below Consult the pillow speaker manual for the model that will be attached to this unit 1 Use the TV AV button on the TV or remote to select the DVD mode 2 Gently insert the disc into the s
4. and Premium Only one Service Level is available at a time Service Level Ficture Soud Channek Features OSD Language Sources FM RADIO signal Auto Program 4dd Delete Channels Clear Service Level Copy Service Level Parental Control Power on Channel Channel Memory Override Channel Lock Postion A T Postion T Exit SETUP xi Exit SETUP 1 Press the SETUP button on the remote control 2 Press A or to highlight Channels 3 Press to enter the Channels sub menu Signal Four different tuning types are available depending upon the healthcare facility s signal type Selection of the correct signal type is required for the TV to recognize all possible channels and before any channel programming can begin 1 From the Channels menu press A org to highlight Signal 2 Press lt or gt to select Air Cable STD Cable IRC or Cable HRC NOTE Most hospitals use the Cable STD signal style PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 937 743 6010 FX 1 937 743 5664 Document Number PD1961127R1 DOC Communication PDI P19LCDC Quick Start Guide Page 9 of 12 Systems Inc Better Solutions Are Within Reach INSTALLATION INSTRUCTIONS Auto Program The TV automatically scans each available channel for activity Channels that display activity are memorized into the selected Service Level Ce EC wignal u Mode Analog Only Auto Program u Channel Sequence Interleave A D Auto
5. for help Copyright PDI Communication Systems Inc claims proprietary right to the material disclosed in this user manual This manual is issued for user information only and may not be used to manufacture anything shown herein Copyright 2009 by PDI Communication Systems Inc All rights reserved Disclaimer The author and publisher have used their best efforts in preparing this manual PDI Communication Systems Inc makes no representation or warranties with respect to the accuracy or completeness of the contents of this manual and specifically disclaim any implied warranties or merchantability or fitness for any particular purpose and shall in no event be liable for any loss of profit or any other damages The information contained herein is believed to be accurate but is not warranted and is subject to change without notice or obligation Trademarks Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories All other brand names and product names used in this manual are trademarks registered trademarks or trade names of their respective holder PDI and Better Solutions Are Within Reach are registered trademarks of PDI Communication Systems Inc Springboro Ohio PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 937 743 6010 FX 1 937 743 5664 Document Number PD1961127R1 DOC pe r Comic PDI P19LCDC Quick Start Guide T Systems Inc Bette
6. 1961149 doc PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 937 743 6010 FX 1 937 743 5664 Document Number PD1961127R1 DOC
7. CTIONS Be sure to read follow and keep these instructions Heed all the warnings MAINTENANCE AND SERVICING Servicing is required when the TV has been damaged in any way such as the power supply cord or plug is damaged liquid has been spilled or objects have fallen into the TV the TV has been exposed to rain or moisture does not operate normally or has been dropped Never remove the back cover of the TV this can expose you to high voltage and other hazards If the TV does not operate properly unplug it and call an authorized service center or PDI CAUTION These servicing instructions are for use by qualified service personnel only POWER CORD Protect the power cord from being walked on or pinched particularly at the plugs convenience receptacles and the point where they exit from the apparatus To avoid any malfunctions of the unit and unwanted electric shock or fire accidents please observe the following Hold the plug firmly when connecting or disconnecting the AC power cord to from an outlet DO NOT connect or disconnect the AC power cord when your hands are wet Keep the AC power cord away from heating appliances Never put any heavy objects on the AC power cord DO NOT attempt to repair or reconstruct the AC power cord in any way under any circumstance Remove dust dirt etc from the plug periodically If the unit has been dropped or otherwise damaged turn off the power and disconnect the AC power cord from the outlet
8. Delee Channels a Free Programmed P Clear Service Level a Basic Blank Copy service Level a Premium Blank amp Parental Conirol Power on Channel Channel Memory Override Channel Lock After setting Signal press A or W to highlight Auto Program Press gt to select it On Mode press lt or gt to select the scope of channel scanning Analog Only TV searches for analog channels only Digital Only TV searches for digital channels only Analog and Digital TV searches for both analog and digital channels Press A or to highlight Channel Sequence Press lt or gt to select the Channel Sequence in which the channels are displayed 7 Interleave A D Channels are displayed in the order of channel number All A then D Digital channels are displayed after all analog channels Press A or to highlight the Service Level Free Basic or Premium you wish to program The menu displays the current programming status of each level as either Programmed or Blank NOTE A programmed service level also can be reprogrammed if desired Press to start auto programming A confirmation menu will appear before proceeding Press A to start auto programming Press WV to cancel the operation The TV now will search all available channels Auto programming requires several minutes to complete NOTE Digital channel auto programming may take longer than 10 minutes to complete Press the SETUP button to return to normal TV viewing PDi Communicat
9. LCDC Quick Start Guide ERT Systems Inc Better Solutions Are Within Reach INSTALLATION INSTRUCTIONS Across Room Wiring KS d 4 A AT stereo style pillow speaker pendant control jack is located on the TV s connector panel This TV is designed to work with either a digital pillow speaker that generates digital style control codes or a single button analog switch style pillow speaker A rear panel mounted switch allows use of different brands of pillow speakers and supports Zenith Philips and RCA compatible pillow speakers BLE To Wall Plate Pillow Speaker Connection WARNING DO NOT connect the pillow speaker circuit Common to earth ground Grounding of the Common will defeat the isolation circuitry of the TV and possibly expose the patient to harmful shock currents should a wiring fault occur NOTE A Jumper Cable is NOT supplied with the TV and must be ordered separately AT to 44 Jumper Cable 4 to 6 Pin Jumper Cable SPEAKER DATA SWITCH SPEAKER COMMON COMMON DATA SWITCH ACROSS ROOM WIRING PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 937 743 6010 FX 1 937 743 5664 Document Number PD1961127R1 DOC Communication i L2 i Systems Inc Better Solutions Are Within Reach Antenna ANT Connection An F style jack is located on the TV s connector panel CAUTION Some hospital A cable systems provide powe
10. NOTE The file name might be different than what is shown in the above right screen shot 7 Press to download the TV s setup to the SD Card A progress screen will be displayed Save Settings To SD Card Overwrite PISLCDC TDF with setings from TY Hach a Yes A 8 A confirmation screen will appear Press the A to start the process or press lt to return to the previous menu 9 A progress screen will appear as the settings are restored Press lt twice to return to the Cloning Main Menu 10 Remove the SD card to return to normal TV operation PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 937 743 6010 FX 1 937 743 5664 Document Number PD1961127R1 DOC Communication PDI P19LCDC Quick Start Guide Page 11 of 12 Systems Inc Better Solutions Are Within Reach INSTALLATION INSTRUCTIONS DVD Module Operation WARNING AC power supply must be disconnected before installing the DVD Player Failure to do so will Cause irreversible damage to the TV DVD Module Installation Refer to the illustration below and follow the procedures below to install the DVD Module onto the LCD TV 1 Plug one end of the cable into the DVD module and the other end to the LCD TV 2 Carefully slide the module into the desired position and lock the module with the screw o ae DI iz y Tef e GR T Tie D imm TTN o HH l A ES tm E a Lats Ce BES A a Enable DVD Module Now that you have the
11. Quick Start Guide HELSA ADELE oy lb ELLA re H Mutt OO EE oy ed geg FEINO apeastpatt TERPTTER RET P19 Hospital Grade television Model PDI P19LCDC PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 PH 937 743 6010 FX 937 743 5664 http www pdiarm com Better Solutions Are Within Reach Document Number PD1961126R1 DOC pe r Comic PDI P19LCDC Quick Start Guide E Systems Inc Better Solutions Are Within Reach INSTALLATION INSTRUCTIONS WARNINGS To reduce the risk of electric shock DO NOT perform any servicing other than what is contained in the operating instructions unless you are qualified to do so This symbol is intended to alert the user of the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This symbol is intended to alert the user of the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance NOTE TO CABLE TV INSTALLER This reminder is provided to call the cable TV system installer s attention to Article 820 40 of the National Electrical Code The code provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of the cable entry as practical SAFETY INSTRUCTIONS INSTRU
12. ion Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 937 743 6010 FX 1 937 743 5664 Document Number PD1961127R1 DOC eg Communication PDI P19LCDC Quick Start Guide EE Systems Inc Better Solutions Are Within Reach INSTALLATION INSTRUCTIONS Cloning Cloning allows quick programming of a TV from a SD Card The operation involves first downloading setup information from a programmed host TV to an SD Card and then uploading the setup information to another TV Cloning can also be used to re program a programmed TV Save Settings to SD Card 1 There needs to be a TDF file for the P19 in a folder called PDITDF on the SD Card before settings can be saved This file is posted on PDI Communication s web site http www pdiarm com support NOTE f the files are not on the SD Card or not in the PDITDF folder a screen will appear that says there are no files in the PDITDF folder when you perform step 5 2 Turnonthe TV 3 Insert the SD Card into the SD slot on the connector panel of the TV See connections picture on page 8 A Cloning Main Menu will appear 4 Press A org to highlight Save Settings to SD Card 5 Press to display Save Settings to SD Card Clomng Main Menu Save settings To SD Card a PISLCDC TDE a P26 LCDC TDF a P LCDC TDF a P4LCDC TDF a Restore Settings to TY E Save Setimgs to SD Card a Upload Firmware to TY a Information rr 6 Press A org to highlight the file for the P19
13. lot with the label side facing the same direction as the front of the TV 3 The disc will be drawn into the unit and loaded automatically K Label side ESCH 4 Press the gt Play button to start playback NOTE Playback might start automatically when the disc is inserted 5 During playback press the mStop button once to stop playback and then press the gt Play button to resume Press the sStop button twice to stop playback completely 6 During playback press the Il Pause button once to pause the playback press it repeatedly to start step by step playback and press the gt Play button to resume normal playback 7 During playback press the button to go to the next chapter Press the M4 button once to return to the beginning of the current chapter press it twice to go to the previous chapter 8 During playback press the button to activate fast forward playback press the button to activate fast backward playback During fast playback press the gt Play button to resume normal playback NOTE The FFD RWD speeds are x2 x4 x8 x16 or x32 9 On the PD108 127 remote the OK button and the directional buttons that surround it can be used to select the menu item choices on a DVD e g Scene Selection and Bonus Features Use the four directional buttons to move to the desired menu item and press the OK button to select it Additional Information Additional information is available in the user manual Document Number PD
14. r Solutions Are Within Reach INSTALLATION INSTRUCTIONS Wall Mounting With PD168 005 Standard Wall Bracket Not supplied with TV 1 Refer to Figure 1 Select a location on the wall approximately 5 inches below the ceiling NOTE DO NOT locate AC Across Room Wiring and CATV Signal outlets below the Wall Bracket s location as it will cause clearance issues and interfere with the TV s cabinet when mounted to the bracket Position the Wall Bracket and locate two mounting holes Secure the bracket to the wall mounting hardware is not included 2 Refer to Figure 2 The TV can be mounted with 4 Artoss Room 1 I l l I mm hardware not provided using a compatible Wiring amp CATV mount Position the Back Mount on the LCD TV Sion A l cabinet Attach with four M4 x 6mm screws PISLCDC provided with the mount 14 7 H 18 W F 3 Mate the Back Mount to the Wall Bracket making sure the pivot pins are retained in the U shaped slot Using the pilfer security driver packed with the hardware secure with two 10x32 pilfer screws 4 Connect the AC power cord Pillow Speaker Jumper Cable and CATV Coax Cable 5 The TV s tilt can be adjusted by loosening both Pilfer Screws adjusting tilt and then tightening the Screws Figure 2 PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 937 743 6010 FX 1 937 743 5664 Document Number PD1961127R1 DOC pe r Comic PDI P19
15. r voltage on the coaxial cable This TV is NOT designed to be powered via a Coaxial cable DO NOT connect to a powered coaxial cable Damage will result to the TV AC Power A right angled AC power cord is attached to each TV Connect the AC power cord to a powered outlet Page 7 of 12 PDI P19LCDC Quick Start Guide INSTALLATION INSTRUCTIONS Se V e Q op a Lk I is p _ UL ID E Hospital Coax Cable V g o o H fe Wl oj e i i DN a NM E I H Sg PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 937 743 6010 FX 1 937 743 5664 Document Number PD1961127R1 DOC es Zu Congo PDI P19LCDC Quick Start Guide Page 8 of 12 Systems Inc Better Solutions Are Within Reach INSTALLATION INSTRUCTIONS Product Accessories Not Included with TV Patient Remote Control PD108 421 75mm VESA Wall Mount PD168 005 For TV s without DVD module Programming Remote Control PD108 420 a to 6 Pin Jumper Cable PD106 416 Patient Remote Control PD108 427 Remote comes with DVD module Jo to Jumper Cable PD106 417 Programming The remote control PD108 420 is used to perform all setup operations for the TV NOTE The following instructions assume you have correctly mounted the TV wired an external pillow speaker connected an RF coax cable signal and powered the TV on Channels The TV offers three different programmable Service Levels Free Basic
16. se a striking hazard when mounted at an elevated position OTHER EQUIPMENT Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the TV Use caution when moving the cart WARNING To reduce the chance of fire or electric shock only utilize the accessories recommended by the manufacturer PDi Communication Systems Inc 40 Greenwood Lane Springboro Ohio 45066 USA PH 1 937 743 6010 FX 1 937 743 5664 Document Number PD1961127R1 DOC pe r Comic PDI P19LCDC Quick Start Guide TET Systems Inc Better Solutions Are Within Reach INSTALLATION INSTRUCTIONS FCC Copyright Disclaimer and Trademarks FCC This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential or commercial installation If this equipment does cause harmful interference to radio or TV reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician
Download Pdf Manuals
Related Search