UM-TEK 902-HD
Contents
1. TEK 1201 HD Presentation Switcher 1201 HD 3 IR P ER eurs nm MIC VOLUME LINE VOLUME User s Manual February 4 2014 Please read this manual carefully before using the system Attention This manual only includes operational instructions and specifications and is not intended to be used for service Specifications are subject to change without notice Please ask your local dealer for detailed information O Copyright 2011 TEKVOX Inc No part of the contents of this book may be transmitted or reproduced in any form or by any means without the written permission of TEKVOX Inc All rights reserved Please check website or contact local supplier for updates www tekvox com operation Notice In order to ensure the proper use of the product and the user s safety please comply with the following items during installation and maintenance The system must be properly connected to earth ground Do not use ungrounded or two bladed plugs and ensure the alternating power supply ranged from 100v to 240v and from 50Hz to 60Hz Do not operate the device in locations above 100 F and below 30 F To avoid any damage by over heat please provide adequate ventilation to radiate the heat when operating the device The device should be turned off when in wet or humid areas The AC power supply line should be disconnected from main power during the following operation2. 1 1 1250 67 5 50 16 9 The bandwidth is up to 170MHz Changeable aspect ratios Full screen wide screen 4 3 auto adjust Supporting HDTV input 7 3 VGA input The VGA resolution is VESA standard supporting No Resolution No Resolution 1 720x400070 Hz 8 1024x768070 Hz 2 640x480 60 Hz 9 1024x768 075 Hz 3 640x480072 Hz 10 1280x768 4 800x600 60 Hz 11 1280x1024075 Hz 5 800x600072 Hz 12 1360x768 60Hz 6 800x600 75 Hz 13 1920x1080 7 1024x768 60 Hz The bandwidth is up to 375MHz Changeable aspect ratios Full screen 4 3 TEKVOX INC 5 www tekvox com 210 348 6565 7 4 HDMI input HDMI resolution support No Resolution No Resolution 1 640x480 60 Hz 9 1024x768070 Hz 2 640x480072 Hz 10 1024x768 075 Hz 3 640x480075 Hz 11 1280x1024 75 Hz 4 800x600 56 Hz 12 1280x720P 5 800x600 60 Hz 13 1360x768 6 800x600 72 Hz 14 1920x540 7 800x600 75 Hz 15 1920x1080 8 1024 768 960 Hz 16 1920x1080P Digital embedded audio decoding Changeable aspect ratios Full screen wide screen 4 3 auto adjust Support HDCP 1 3 compatible with DVI signal 7 5 Audio input output 2 pairs of L R analog audio input 4 VGA audio and 2 MIC audio inputs 2x10W 280 amplifier output L R stereo audio output and HDMI embedded audio Volume Bass Treble adjustable Audio status presets changeable scene mode Wall mounted Desk 8 OSD Operation On Screen Display Th
3. OK on the remote or send RS232 command 0609 to confirm update The unit will capture the new firmware from USB flash disk After updating is completed reboot and send the command 061796 to reset to factory settings This command must be sent using a command line program set to 115200 5 After reset reboot again 4 Notice The name of the update file must be MT23ATV bin TEK 1201 HD Presentation Switcher 12 Technical Specification Inputs 4 HDMI 1 3 HDCP Compliant 4 VGA with 1 8 stereo audio 1 YPbPr with RCA stereo audio 2 Video with audio shard with S Video 1 S Video Video and S Video support PAL SECAM NTSC Note There are no audio inserts for DVI type signals unless you use the Mix input with separate volume control Serial control interface COM xcii em Ree EU e ed One RS 232 serial TX and RX only Protocol iii ao 9600 8 bit 1 stop bit no parity Output ADM iii iii HDMI 1 3 Supports HDCP RU 45 eee ed tieu es HDBaseT 200 feet using Cat 6 Best to use shielded cable chc DB 15HD Female Resol ti n i tan RES XGA WXGA 720P HD 1360x768 and 1080P Speakers un mt eta de neon 10 20 watts per channel into 8 4 ohms respectively General Power Supply iens UAM 100 240VAC 50 60 Hz 65 watts Temperature humidity esee Storage 40 to 158 F 40 to 70 10 to 90 Non Condensing Operation 32 to 122 F 0 t
4. Set Resolution to 1024X768 XGA Resolution XGA 1024X768 0627 Set Resolution to 1280X720 720P Resolution 720P 1280X720 0628 Set Resolution to 1280X800 WXGA Resolution WXGA 1280X800 0629 Set Resolution to 1920X1080 1080P Resolution 1080P 1920X1080 TEK 1201 HD Presentation Switcher Command Feedback ASCII example Function Description ASCII 0630 Get the volume level LINE Volume XX MIC Volume XX 0631 Get the input source Source XXXXXX 0632 Get the output resolution Resolution XXXXXXXX 063396 Get the image mode Picture Mode XX 063496 Get the audio mode Sound Mode XX 063596 Get the image aspect ratio Aspect Ratio XX 0636 Get the brightness Brightness XX 0637 Get the contrast Contrast XX 0638 Get the saturation Saturation XX 0639 Get the sharpness Sharpness XX 0640 Get the color temperature Color Temp XX 0644 Display OSD CHANNEL OSD Source Display 0645 Disable OSD CHANNEL OSD Channel Source No Display 0646 Display Volume Bar Volume Bar Display 0647 Disable Volume Bar Volume Bar No Display 0648 Enable Digital audio HDMI and SPDIF output Digital Sound Ouput Enable 0649 Disable Digital audio HDMI and SPDIF output Digital Sound Ouput Disable 0650 Get OSD CHANNEL display status OSD Source Display 0651 Get Volume Bar display status Volume Bar Display 0652 Get Digital audio output status Digit
5. 80P Output resolution select XGA WXGA HD area five different resolutions can be selected including 720P 1280x720 1080P 1920x1080 XGA 1024x768 WXGA 1280x800 HD 1360x768 OUTPUT RESOLUTION TEKVOX INC 3 www tekvox com 210 348 6565 6 Connection Diagram Campus gt Network OCCUPANCY With POE SENSOR LIGHTING 25 Wut T PU DO PU DO LA TekSecurity 2490 rer PROJECTOR TPHD402R Receiver RS232 Ey Key pad HDBasetT Lex Control ea PWR vl a SPEAKERS HDBaseT HDMI VGA DVD VCR HDMI Audio YPbPr Audio VGA Audio VIDEO Audio TEK 1201 HD Presentation Switcher 7 Video Audio Description Below are the detailed descriptions of inputs and outputs 7 1 Video and S Video input Supports PAL SECAM NTSC formats Allows for changeable aspect ratios Full screen wide screen 4 3 Color RGB adjustable 7 2 YPbPr input Input Display Parameter Resolution Frame Frame Frame frequency frequency frequency 720 4801 2 1 525 15 75 60 4 3 720x480P 1 1 525 31 5 60 4 3 720 576 2 1 625 15 625 50 4 3 720x576P 1 1 625 31 25 50 4 3 1280x720P 1 1 750 45 60 16 9 1280x720P 1 1 750 37 50 50 16 9 1920 10801 2 1 1125 28 125 50 16 9 1920x1080l 2 1 1125 33 75 60 16 9 1920x1080l 2 1 1250 31 25 50 16 9 1920x1080P 1 1 1250 62 5 50 16 9 1920 1080
6. al Sound Ouput Enable 0655 Freeze output image Freeze Enable 0656 Cancel the freezing of output image Freeze Disable 0698 Firmware update TEKVOX INC 9 www tekvox com 210 348 6565 Command Feedback example ASCII Function Description ASCII 0701 Select HDMI1 input Source HDMI 1 0702 Select HDMI2 input Source HDMI 2 0703 Select HDMI3 input Source HDMI 3 0704 Select HDMI4 input Source HDMI 4 0705 Select VGA1 input Source VGA1 0706 Select VGA2 input Source VGA2 070796 Select input Source VGA3 0708 Select VGA4 input Source VGA4 0709 Select Composite Video AV1 input Source CVIDEO1 0710 Select YPbPr input Source YPbPr 0711 Select S Video input Source SVIDEO 0712 Select Composite Video AV2 input Source CVIDEO2 0720 Mute Line and MIC LINE Mute On MIC Mute On 0721 Un Mute Line and MIC LINE Mute Off MIC Mute Off 072296 Mute MIC MIC Mute On 072396 Un Mute MIC MIC Mute Off 072496 MIC Volume Up MIC Volume XX 072596 MIC Volume Down MIC Volume XX 08XX Set MIC Volume Level XX 00 to 60 MIC Volume XX 99XX Send Macro Command To Version 2 TekMonitor 10 to 19 Macro 10 19 CMD XX 1201 HD Presentation Switcher 10 TCP IP Controlling The optional network port of TEK 1201 HD is used for sending commands using TCP IP control These commands are sent the same as when using RS 232 control There is n
7. e TEK 1201 HD provides On Screen Display OSD menu with various functions and language The operation includes 8 1 Picture Settings The first icon from left of OSD menu is to set the picture parameters It includes the pictures mode preset color temperature contrast brightness hue saturation sharpness scale VGA setting and Advance picture adjustments Some parameters are available depending on the input type For example VGA setting can be set only when a VGA input is displayed The Advance Picture Adjust can set the Digital Noise Reduction dynamic color skin tone and Adaptive Luma adjustments DNR is suggested to be on it can make the output image clear and smooth VGA Setting Advance Picture Adjust CIE TEK 1201 HD Presentation Switcher 8 2 Audio Setting The Second icon from left of OSD menu is used to set the audio sound parameters lt includes the sound effect preset bass treble balance scene mode surround and smart volume setting Some parameters Treble are available depending on different type of input Sound Effect Standard gt Bass 8 3 System Setting The Third icon from left of OSD menu is the system setting It includes the OSD language setting audio listen only and freeze output picture etc Please check the picture below 9 RS 232 Control Send data without carriage return or line feed Data cannot be typed in using a terminal program You must use a program that can
8. image is noisy please make sure the system is properly grounded 8 If the switcher cannot be controlled by its front buttons RS232 port or remote controller the switchers may be bad Please send it to the dealer for repair 14 Warranty TEKVOX Inc warrants this product against defects in workmanship and materials for a period of Three Years from the date of purchase During the warranty period if failure is caused from faulty workmanship and or materials TEKVOX Inc will at its option repair or replace said products or components to whatever extent it shall deem necessary to restore said product to proper operating condition provided that it is returned within the warranty period with proof of purchase and description of malfunction This Limited Warranty does not apply if fault is caused by misuse improper handling electrical or mechanical abuse abnormal operating conditions or non TEKVOX authorized modifications to said product If it has been determined product is defective please call TEKVOX and ask for an Applications Engineer at 210 348 6565 USA to receive an RMA Return Material Authorization Number to begin the repair process as quickly as possible Units must be returned with prepaid shipping charges Please insure package not insured you assume the risk of loss or damage during shipment Returned units must include the serial number and a description of the problem as well as the contact person in case the
9. ion UN M 7 EE 7 9 2 RS2232 COMMANDS a titi 8 10 11 101 IP CONFIGURATION ex reete ERU o ee 11 10 2 CONNECTION AND CONTROL ciao 12 11 GV AGBS PP wiicm 12 12 2 52 Sero Paese veo Sono p ee nai nono A sao 13 SERIAL CONTROL INTERFACE E Eos aet Pp ae Ee ERE EA 13 OUTPUT mI 13 GENERAL SH a eit re b d ud e b neri tiet rea 13 13 PROBLEMS SOLVING amp MAINTENANCE eene eene eene nnne rennen nth sess sees n eese 14 A P 14 1 N TEK 1201 HD Presentation Switcher Description The TEK 1201 HD presentation switcher scaler designed with enough inputs to fit most needs for classrooms and conference rooms For easy installations the TEK 1201 HD not only has mirrored VGA and HDMI outputs it also includes an HDBaseT Cat 5 output with a receiver Other features include a microphone input a stereo line input for mixing iPod and VTC and an integrated 20 watt amplifier The most impressive feature is the TEK 1201 HD can be controlled from both the main unit and the RS 232 connect
10. ion on the receiver or even control our TEK 2 This allows for the TEK 1201 HD to be controlled from a remote control system without having to run an additional RS 232 cable Other options of the TEK 1201 HD are available by request such as lower cost version without the HDBaseT connection and a full version with a TCP IP connection Features 4 HDMI 1 3 inputs with HDCP 4VGA inputs e 1 YPbPr input e 2 Video inputs S Video input Mirrored HDMI and VGA outputs e Mirrored HDBaseT output HDBaseT receiver with RS 232 e Output Resolution XGA WXGA 720P HD 1360x768 and 1080P Remote Control with OSD RS 232 control from main unit or receiver 1 Microphone input 1 Stereo Line Level Mix input Speakers 10 20 Watts 8 4 Ohms e Separate Volume Controls for both Sources and Microphone Line Mix inputs TEKVOX INC 1 www tekvox com 210 348 6565 3 Front and Rear Panel Description 1 2 3 4 5 6 L 1201 HD ns RESOLUTION MIC VOLUME LINE VOLUME 1 Power indicator and IR input 2 Input type selection HDMI VGA VIDEO 3 Selects one of the four Channels of the selected type 4 Resolution selection Please wait 5 seconds between selecting Resolution 5 Mic Volume Control Controls the level of the Mic inputs 6 Line Volume Control Controls the level of the Line Video inputs 7 WGA and Audio outputs All outputs are mirrored 8 HDBaseT
11. o 50 10 to 90 Enclosure type Aluminum Enclosure 1 75 Hx 19 1 W x 9 25 D 44 mm H x 488 mm W x 235 mm Depth excludes connectors Product 4 4422 7 1 lbs 3 2 kg Shipping 9 lbs 1 kg Cormpliances teuren CE MTB 30 000 hours Warranty anne 3 years parts and labor Specifications are subject to change without notice TEKVOX INC 13 www tekvox com 210 348 6565 13 Problems solving amp Maintenance 1 If displayed images have reflections or ghosting check the projector s settings or try a higher quality VGA cable 2 If output signal is not preset or there is a loss of color please check the input and output connections on VGA and video cables Also check for correct source selection 3 If the IR remote controller does not work Check or replace the battery Check for objects blocking the IR receiver The controller may be broken please return it for repair 4 If the unit cannot be controlled through its COM port please check the COM port number in the software and make sure the COM port Baud rate and cable connections are correct 5 If a source is selected and audio is not heard please check for cables corrected to the correct audio input 6 If microphone is not heard check that the microphone does not require phantom power 7 If the output
12. o Web based control for the unit The Web interface is used for network configuration only 10 1 IP Configuration To connect a computer to the network port you must use a crossover network cable or network switch Set its IP address of the PC to the same IP VLAN as the default IP is address or the unit 192 168 0 178 Internet Protocol Version 4 TCP IPv4 Properties o esa General You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Same section but cannot be 192 168 0 178 Obtain an IP address automatically 9 Use the following IP address IP address 192 168 0 227 Subnet mask 255 255 255 0 Default gateway 192 168 0 1 Obtain DNS server address automatically 9 Use the following DNS server addresses Preferred DNS server 202 96 134 133 Alternate DNS server 202 96 128 68 Validate settings upon exit PT e A 2 Enter the address 192 168 0 178 into Internet Explorer you will see the LOGIN page as below Port Configuration Internet Bing Er http 192 168 0 178 Bl 4 x sing pr im we Sign i 3 x bing a News Autofill 2 Ss Favorites 95 Suggested Sites 2 Web Slice Gallery v Configuration fh E El y Pager Safetyy Toolsv amp LOGIN Password Please in
13. output Includes audio and control 9 HDMI Output Includes audio 10 Four VGA inputs 11 Video input 1 Composite with audio 12 Video input 2 Component YPbPr Shares audio with Video input 4 13 RS 232 control 14 TCP IP Optional 15 Line Power Connector 16 Four HDMI inputs There are no separate audio inputs for HDMI 17 Four 3 5mm Stereo Audio input for the VGA inputs 18 S Video input Shares audio with the Video 1 input 19 Video input 4 Composite with audio 20 USB Input for firmware upgrading only 21 Mic and Line level stereo inputs 22 Stereo 10 Watts 8 ohm Amplifier per channel 4 TPHD402R HDBaseT Receiver 200 feet HDBaseT input Includes audio and control HDMI Output Includes audio Not used RS 232 control for TEK 902 HD 5 Volt power UND 1201 HD Presentation Switcher 5 IR Remote Remote Operation Source select area 12 channels for inputs including 4 HDMI 4 VGA 2 C VIDEO 1 S Video 1 YPbPr VIA VIDEO VGA HDMI 5 0 gt od 353 a y Line volume control area MENU LINE A LINE can work when not in Menu MENU mode Volume control area OK Direction and OK buttons MUTE for 4 area these buttons Lline and available only in MENU MIC MUTE audio MIC volume control area MENU VOLUME CONTROL can work when not in MENU mode 720P 10
14. put the password Done Internet Protected Mode Off Av 105 y TEKVOX INC 11 www tekvox com 210 348 6565 Enter the password 88888 and then you can enter the configuration page to configure the IP port including the IP reset PW reset etc Notice Serial configuration cannot be changed Bex as N o a Sigin Stocks Video Favorites 15 Suggested Sites 6 Web Slice Gallery v Port Configuration 2 gt E 7 01 de v Pager Safetyy amp d IPort Configuration Web Server welcome gt system info gt serial info change password reset device I restore default Welcome to IPort Web Server Internet Protected Mode Off fa 105 v After configuration reset device then you can use the new IP address for controlling 10 2 Connection and Control To send IP commands to the TEK 1201 HD connect using TCP IP port 4001 and the set IP address of the unit Use the standard serial commands from a control system or program that can send a complete command line You cannot type the command using a Telnet program 11 Firmware Updating The TEK 1201 HD supports firmware field updating by USB flash disk 1 Copy the file MT23ATV bin to a USB flash disk 2 Plug the USB flash disk to the USB port on the unit 3 Pressing the button HDM on the front panel for 6 seconds or sending RS232 command 069896 for updating then press the button
15. re are any questions TEKVOX Inc makes no further warranties either expressed or implied with respect to said product or its quality performance or operation for any particular use In no event will TEKVOX Inc be liable for direct indirect or consequential damages resulting from any defect in this product even if TEKVOX Inc has been advised of such damage Please note that laws vary from state to state and country to country and that some provisions of this warranty may not apply to you
16. s e Remove or reinstall any component on the device Disconnect or re connect any connector on the device Please do not attempt to remove the cover on the device There are no serviceable components and high voltage is present inside with risk of the electric shock Do not splash any chemical product or liquid on or near the equipment Contents 1 DESCRIPTION Ree 1 2 FEATURES ac 1 3 FRONT AND REAR PANEL DESCRIPTION 2 AETPHDAOQR P 2 REMOTE 3 6 CONNECTION DIAGRAM 25 52 5 55er aora fn o Oa nores oer adea ease dei ner o oov uae y econo 4 7 VIDEO AUDIO DESCRIPTION 555 55 dase eats id Ys Eee eoe Ue Treo 5 TAL VIDEO AND S VIDEO eve Spec ege aene ga p SNC 5 3 2 YPBPRINPUT E A NN 5 7 3 VGA INPUT ari rd het wn e Pee epa 5 TA ADMUIINPUT me NT 6 7 5 AUDIO INPUT TO 6 8 OSD OPERATION 5 5 6 S T PICTURE SETTINGS a PONO UE eos a dud 6 83 2 AUDIO SETTING ara ri die cie te iv 7 8 3 SYSTEM SEITING hie cc 7 9 5 232 CONTRO L
17. send the complete command 9 1 Protocol Protocol Baud 9600bps 8 1 format ASCII without carriage return Connector 3 5mm EURO type connector Left to Right TX GND RX Any change in status is automatically transmitted to the controller followed by a CR LF TEKVOX INC 7 www tekvox com 210 348 6565 9 2 RS 232 Commands Command Feedback ASCII example Function Description ASCII 060096 MUTE Line LINE Mute On 060196 Un Mute Line LINE Mute Off 060296 Line Audio Up LINE Volume XX 0603 Line Audio Down LINE Volume XX 0604 Lock the front panel button Panel Locked 0605 Unlock the front panel button Panel Un Locked 01XX Set Volume Level XX 00 to 99 Volume XX 02XX Set brightness XX 00 to 99 Brightness XX 03XX Set Contrast XX 00 to 99 Contrast XX 04XX Set Saturation XX 00 to 99 Saturation XX 05XX Set Sharpness XX 00 to 99 Sharpness XX 0606 Auto adjust the input parameter VGA only Adjustment 0607 Auto adjust the color temperature Color Temp XX 0608 ZOOM the image set the aspect ratio Aspect Ratio XX 0609 OSD OK OK 0610 OSD Left Left 0611 OSD Right Right 0612 OSD Up Up 0613 OSD Down Down 0614 Set the picture mode Picture Mode XX 0615 SM Mode Sound Mode XX 0616 OSD MENU MENU 0617 Command to reset to factory defaults Factory reset 0618 Set Resolution to 1360X768 HD Resolution HD 1360X768 0626
Download Pdf Manuals
Related Search