User Manual - acmsystem.com
Contents
1. Gi Op 16 CAME OG Gp 167 CaAMOA Od ite OD 8 HECAT HECAM DQ ME CAM Dig KER Ee TET nr 167 Cai 167 tam OO MEtAMID DO 34560211 DO Mecami2 OG 605412 DO MECHI DOG 460415 DO 460016 01 03 2004 LI Od 26 Serna Adair 245 2009 11 23 17 43 26 be Cie Lit ME ea g Fig 4 9 Live Dwell 14 CNL USer Manual 4 3 1 4 Add Device A region or a group should be created before adding a device DVR User should select a region or group to add the DVR Below is an example of adding a DVR to a region i In Device Manager interface select the region in Device List and click gt button it will pop up Add Device dialog box ii Click Search Device button it will pop up Device Search dialog box The search tool would search and display the DVRs available on the network lil Double click the DVR in device list box to select the DVR and to go back to Add Device dialog box to add the device IV Select IP of the DVR in IP Address dropdown list V Input username and password of the DVR in User Name and Password fields Vi Input the data port of the DVR Notice f the DVR is in LAN user may use the default port 9008 If the DVR is in WAN then the user would need to mention the port number for every DVR e f the DVR is in WAN user would need to modify port number in Server Configuration gt Net Configuration refer to Network Setup of the DVR2. I In the System Config menu click Record Playback icon ii Select the Record Type from available options Schedule Manual Motion Sensor iii Click button select the date for the required record S IV Click Y button to select the channels V Click VA button to search once searched the record file would be displayed on the right hand side Vi Drag playing scale marker for the required timeline and click amp pointer to amplify the time scale Ki vii Click gt button or drag marker to play the recorded file Note The default precision of time scale is 15 minutes and the range of scale is 0 24 which denotes 24 hours of a day click 4 to amplify scale for a 1 minute precision The scale range 0 60 denotes minutes of an hour 4 5 2 Video Backup Backup Peale Remote backup Select Time Record Type en ae By Event End Time 2008 8 14 15 56 22 Motion Sensor Select Ch Search Backup Backup Path C Program Files ControlCentersB ackupD ata Ey Event Type Device Name Channel Hame Start Time End Time Fig 4 15 Remote Backup Users can backup files for a date range based on time or events There are two types of backups local and remote backup The former is to take the backup of local recording files residing on the computer and the latter Remote Backup is to take backup from the remote DVR Configuration Steps 4 5 2 1 Backup by Time To bac
3. IV Modify Channel In device list select group name and click P button it will pop up Modify Channel Info dialog box amp Input new channel name in Channel Name textbox Click OK button to modify channel name The user can also select the network stream for the channel using the dropdown box Master Second stream Parameters and explanations to modify region names group names device names and channel names refer to table below 4 3 1 6 Delete Users can delete regions groups devices and channels Steps i Select the region the group the device or the channel to be deleted Il Click m button a confirmation box will pop up lil Click Yes button to delete the item 4 3 2 Local Configuration Click Local Configuration to enter the submenu This interface has 3 tabs amp Local Basic Configuration amp Local Schedule Configuration Local Alarm Configuration 4 3 2 1 Local Basic Configuration UWL USer Manual Local Basic Contig Local Basic Contig gine ste grate Eaa aia ett en Fata Live Contig Dwell Time 10 Seconds vw Snap picture number Title DevicetChannel Record Config Partition Free Space Total Size Recycle Record Record partition en 26 03 G 37 56 G D x 38 00G 55 59 G E 43 246 P5 59 G Fs 65 11 G 7812 G Local Alarm Config Alarm Holding Time 30 Seconds we Post alarm time S 1 Minute ww Alarm processing function Log List Maintain Alarm lo
4. able to display the all the cameras listed under a particular camera group Dwell Group button Notice Dwell Group means to view the images of a group of cameras This is activated only if the Dwell Setup in done in System Config lf used the interface would dwell between the image groups as per the setup done in System Config Pre Group Next Group button The Pre Group Next Group buttons are used to toggle between the channels of a group when the set display mode is not able to display all the channels of the group Setup steps Enter into System Config interface add devices on the left window first and then add multiple groups under Channel group column and add channels for each group Click Ga icon select groups to dwell and then set up the time to dwell Switch to Preview interface gt Channel Group double click channel group or drag the channel group to the right window to preview all images of channels Select screen mode less than 64 screen modes Now user can see all images of channels in this group through Pre Group Next Group button Users can right click on the live preview picture for the following operations e Turn off the live To turn off the live picture display from current channel e Start Manual Record To start recording for the current channel If the preview is stopped then the recording of the channel would also stop e Stop Manual Record Stop recording for the current channel e En
5. the VGA driver information if the Device Information and the Driver Information is correct then make sure that the DirectDraw Acceleration and Direct3D Acceleration is Enabled 2 Install the VGA driver in case it is not installed Note The default state of DirectX acceleration of Windows2003 Server and Vista system is disabled thus the user would need to enable this function A Hardware Acceleration Right click on the Desktop gt Properties gt Settings gt Advanced gt Troubleshoot drag the scroll bar of the hardware to the Troubleshoot interface and press OK The screen may go blank for minute B DirectX Acceleration Click Start enter dxdiag command into the Run column and press enter the DirectX Diagnostic Tool interface will pop up and refer to Fig 6 2 Enable DirectDraw Direct3D and AGP Texture on the Display interface Sound ary 2 sand System Display Device Drivere Ham ATI Padeer HD 3500 Seres Wain river ajumdet el ated dl atiumdag a Manukacturer ATI Tedmaoges Inc v rsion 3 14 3010 0685 Si1glkeh Chip Typs ATI displav adapter 39398 Dax 2009 7 15 09 49 25 DAC Type Inters DACJS400MH2z WHOL Lecod sa Apors TowlMemory 506 M3 DO vermon SEx Current Cieclay Mode 1280x 1724 32 bt 60H2 Monier Gener c Non SP Morilor Directs Features DrectD aw Mctelaraticr Enabled DirectD Ac elsatcr Enabled AGP Texture Accelerator Enabled Notes Wo problems foun
6. 1 2011 11 03 16 32 28 Motion Alarm CAM10 2011 11 03 16 32 28 i Motion Alarm CAMS 2011 11 03 16 32 27 System Config Motion Alarm CAMS 2011 11 03 16 32 27 Motion Alarm CAM 2011 11 03 16 32 27 ER Video Search lt m1 F Motion Alarm CAME 2011 11 03 16 32 27 a Mntinn Alarm CAME 2011 11 02 16 3277 ef Enk Device List AeiEialeun g amp Figure 3 3 Control Center Interface D V R cus vs CMY User Manual 3 2 Exit There are two ways to exit control center normally 1 Click Beith ton and then a confirm dialogue will pop up If confirmed the application would be exited 2 The user can click PS button to exit 4 Functions and Operations This chapter is divided into 4 parts for the ease of understanding the following features 1 Basic Functions Preview system Configuration E Map Video Search amp Backup pia oP In this chapter we will divide four parts to instruct the functions and specific operations of this software Users can enter the control center to watch locale through Internet to set parameters to enable the record to playback the record files and to backup the record and so on 4 1 Basic Functions After entering the Control Center users can operate following functions 4 1 1 Lock amp Unlock Interface is in Lock state When current operation interface is in Lock state the user would need to enter the password to unlock and use the Control Center The user can lock
7. 20 Ao EOT OU EE RENEE EN 22 4 3 7 Export amp Import Local Config cece eccccsssececessssseeeeessseeeeeessesseeeessessseeeeeseaseeeesssaseeeesssaseesesessaaeeees 22 o RE 22 4 4 1 NNN 23 4 4 2 BLI Ke EEE EEE SE ER 23 4 4 3 LES OE 0 EEE EE ENE A 23 4 5 Video Search rrrrnnnrnrrannnnnvnrsannnnnvnnssnnnnnrnnssnnnnnrnnssnnnnnnnnssnnnnnnnnssnnnnnnnnssnnnnnnnnssnnnannnnssnnnannnnssnnnnnnnnssnnnannnnsssnnnnnnnnsenn 23 4 5 1 MICO TA OAC IG RE EE EE EE 24 AO ERIN 25 5 UsemethodToriP TOOL 4 26 O 000 0 016 0 EEE 29 CMY User Manual Preface Central management software is a typical client management program providing a common platform to centralize all devices to attain a single unified system This greatly improves the efficiency of control and operation for all digital video recorders IP camera DVS etc through the network This manual will help you to familiarize with the software and master its operation methods Here we will take DVR connection for example The users can use this feature rich CMS to control monitor and manage multiple DVRs remotely user friendly GUI CMS User Manual 1 Introduction Central Management Software is a client application designed especially for embedded digital video recorders network video servers IP camera and software compressed cards for remote centralized management of multiple devices In the video surveillance system the administrator can control video input devices and
8. 80912 1 2 DVR 192 168 11 66 update Software E16811 1 2000 00 19 4E 20 2E 21 DVR 2 6 6 beta 2009071020080912 1 2 DVR 192 168 11 68 168111 2000 00 18 4E 51 23 44 DVR 2 6 6 beta3 2009071020080912 1 2 name 192 168 11 69 Update Kernel 168 111 9008 00 18 AE 30 01 38 90806 1 1 IP Camera 1 1 2 dm hela E E ammm mm m m i en aan AMAMA im NE al Modify IP address dialog box will appear as below Metwork setup IP Subnet Mask Gateway 192 168 11 48 2509 255 255 0 192 168 11 1 User Name admin Tip Please check if password ie corect when ddress setup fails Modify IP address and click OK button to exit the dialog box IP Tool will display the new IP address Select the device right click Update software as below picture shows 2 CMS User Manu Update Software IF 192 168 11 45 Fort J008 User Name admin C Documents and SettingsadminsDesktop41 1 2 0908014T Browse Update File Update Software Click Update start upgrading the progress bar will display as below When upgrading doesn t disconnect PC to device make sure power is on Update Software IF 92 168 11 48 Fort User Hame Password Update File LCA Documents and SettingssadminsDesktops1 1 2 05080147 Update Software Cancel Upgrading finished a massage box will pop up as below Update Software IF 132 168 11 48 Fort User Name Password Update File Upda
9. CMY User Manual Contents COMES EE GEAR i 512 EEE lil LL ON 1 2 AAO a E E EE EE E NN 1 24t System ReguUremMmEN EEE EE NE 1 22 Compuer Hardware REQUIFEMENT svarer 1 2 3 Installation PIOCESS L ren amnebemskenmnebdanennmnndeidenmenendlsande names 2 2 4 Uninstalling the Software rrrrrrrnnrrrnronnrrrrrannvrnrrsnnrnrsrsnnrnrssnnnnnrrnnnrnssennnnnsssnnnnesssnnnnsssnnnnnsssnnnnesssnnnnesssnnnnsssnnnnesesns 3 gt ENE ieee ee E 4 G 19 66 0 NE EE NE EE ENN NE EE NE ME EE EE 4 PE 6 A Funcions and KO 01 11 cssssssacosnsrsncosnnnnndesssnsaansnsranaesnsnmmdannaniadasnsrentaanannndnenenaioansrentenenndanenantes 6 BM 98 0116 O SEE EEE NE 6 4 1 1 Bele gt 4 8 0 00 PRE EEE EE 6 4 1 2 Minimize amp Maximize errorrnnnrovrronnnnrvvrronnnnrrvnsannnnnvnnssnnnnnnnnssnnnnnnnnrsnnnnnnnnsssnnnnnnnnssnnnnnnnnssnnnnnnnnssnnnnnnneesnnn 6 Ato Alarm DISHA EE 7 12 8 42 POUR vr 9 4 2 1 PIZ C OnNgUraUO onenen EEE 11 4 3 System Configuration rrannnrvronnnnvnrnnnnrvnrnnnnrnnsnnnnvnrsnnnnnnrnnnnrnnennnnsnrsnnnnnnsnnnnsnnsnnnnsnssnnnnnnssnnnvensnnnnnesnnnnnnssnnnnnesne 12 4 3 1 BEG REE EEE 13 4 3 2 KEN NN 16 4 3 3 Server Configuration s arsnrvrannnnvvrannnvnrnnnnrvnsnnnnvnrsnnnnvnrsnnnrnnennnnsnrsnnnnsnssnnnnnssnsnnsnssnnnnnnssnnnsnnsnnnnvnssnnnsee 19 4 3 4 Map Configuration rrrnrrnrnnnnvvnrnnnnvvrrrnnvrrrrennvvrrnsnnvnrrennnrnsssnnvnesssnnnnsssnnnesssnnnnesssnnnnessnnnnesssnnrnesssnnnnsssnnnnee 19 4 3 5 VERN re
10. In addition the setting of your IE browser must be enabled to download activeX components b Run the Setup exe from software CD the next menu will pop up hal ped me jn ee i a Nm EEE s roll Loree pm sa derre A E hogy enor Gat s Fr sl rddes page brie ues Bae sug pa Fig 2 1 Welcome Screen Click Next to enter the next step Dhecaa Titina Lee atesn E sizi hakber sene SB eed am s fies p rad Comforting on hae a kids Top repay eg bolden check Bet Torakal bog diini boc lok Barney grad pedal Fig 2 2 Choose the installation destination 2 CMS User Manual The default destination folder for installation is C Program Files user can use Browse button to change the destination path Once the path is selected click Next to enter the next step O Debr Peep ahim Pike Ee se he cei bade Ciri Pimi k kapi Fe er i h Fag n Fabia jki fabe ET bikja rpa le hya ing a Hots Figure2 3 Type a new folder name or select an existing folder to install Click Next to start the installation Carters aap oj vrenge ete fet pg arr Fen ons sr uante erie rer Fig 2 4 Installation Progress Status The installation is completed Fig 2 5 Setup Complete 2 4 Uninstalling the Software There are three methods to remove the software 1 Users can uninstall the software from Add or Remove programs 2 The user can remove the software by using Uninstall icon fr
11. Meanings Single Picture Preview button Click this button to watch camera in single picture preview mode 4 Picture Preview button Click this button to get the display in four picture preview mode 9 Picture Preview button Click this button to get the display in 9 picture mode 16 picture mode EE 25 picture mode E secrete Me te daly h annen 36 picture mode ESI 64 picture Click this button to get the display in 64 picture mode 100 picture Click this button to get the display in 100 picture mode 256 picture Click this button to get the display in 256 picture mode Oe D Turn on audio button Click this button to turn on the audio signal Snapshot button Click this button to take snapshot of the selected camera A maximum of 10 pictures can be taken in one go Click Snap Y button to pop up a dialog referred Figure2 Close All Preview button Click this button to turnoff the live video Before switching display modes a user must turn off the live images LE dag EE E E E 2 CMS User Manual Dwell button This can be set from a single channel mode to a maximum of 9 channel mode 5 Dwell means to display live images from different cameras in a sequence according to sequence of the DVR in Camera Group The images may be displayed as a single channel or in a grid fashion from different cameras The Dwell icon feature would be activated only when the current display mode is not
12. Open button to confirm the path vi Click Confirm button to add map in the map control center successfully 4 3 4 1 3 Add Sub Nodes A sub node can be added to an existing E Map Configuration Steps In the Map Config interface right click on an existing map ii Select Add Son Node Add Map dialogue will pop up lil Input the name of the map IV In the path box click amp button Open dialogue will pop up V Select the path to save E Map and click Open button to confirm the path Vi Click Confirm button to add map in the map Control Center 4 3 4 1 4 Modify Map Names Users can modify E Map names Configuration Steps i Right click on a map and select Modify Node Name ii Modify the name of the map and click to save the modifications 4 3 4 1 5 Delete Sub Nodes A user can also delete Sub Nodes Configuration Steps Right click on an E Map and select Delete i A confirmation box would pop up confirm to delete Note Deleting a Map would automatically delete all sub nodes 4 3 4 1 6 Set camera Users can set a camera in the E Map as per the actual map of the area Configuration Steps In the Map Config interface select the map to add camera ii Select a camera from the device list and drag it to the E Map on a suitable location Note amp Once the setup is complete the user can enter into the E Map interface to watch live pictures and map alarm Pleas
13. able Audio Enable audio for the current channel e Full screen This would display the image in full screen mode When in the full screen mode double click or right click to exit the full screen mode A user can choose to output the signal on a secondary monitor by selecting DISPLAY2 When output is displayed on the secondary monitor the user can continue with other activities on primary monitor 11 03 2011 16 38 16 11 03 2011 16 38 16 mame SIV GAV per M WSS UNG s VE aes MN dg ERA FEAMMOO 1 a DIST 1b Se 08 AMT we ae 4 4 Camera preview Save To C Documents and Settingsttvttdy Documents My Pictures One Picture per Page Mult Picture per Page Eaim gt Figure4 5 Snap Dialog Box 4 2 1 PTZ Configuration A PTZ camera can be controlled from the Control Center User can move the dome up down right and left stop rotating adjust rotation speed Iris zoom focus the dome set the presets and cruise lines etc 4 2 2 1 Dome Control From the PTZ Configuration toolbar the user can control rotation and speed of the dome Function buttons of the Dome Control are described as Table4 2 11 os er Table1 Function Buttons amp Explanation of PTZ Configuration Meanings am to rotate up w to rotate down to rotate left means the dome to rotate right 8 to stop rotating In the device list box right click a certain channel a shortcut menu will be shown as follo
14. al 20 OL 22 33 44 MYR 265 ETE SOT 2 MR IR CPD 19216111 im MIKE RF DWA hJ MT SSS 1 WR 19161115 55550 19168111 2G Chiara DWA 27 0 AN os SOE 13 Di IVS REN 19168111 2000 insect DA 2 Fibs nen 20000912 12 Dre 192 VES TL 147 ann nl TZITA TII oe CP SE AES DYR eae a 071 080912 ha hk SG EN ASS NVE 1160 OE GADE Supe A OMSL TATL Soe Tie 1160 MEDSFEF PS Supe iak ISVS 19416831 160 APO Superb Click OK button start the IP Tool refer to below picture The device can be searched on net if cant search the device please check the accession of PC and device gt IP Tool If no any devices found please make sure that you don t run ControlCenter software IP Address Device name Subnet Mask Gateway Data Port MAC Device Type Firmware version Build kernel Dever 30222365 name 192 168 11 45 255 255 255 0 192 168 11 1 9008 00 18 4E 30 EE 04 IP Camera 1 1 2 90806 20090609 1 1 When upgrading the program and kernel the IP address of PC and device should at the same network segment If the network segment is different user should change the IP address by selecting the device and right click network setup name 192168 11 45 255 255 2550 192 168 11 1 9008 00 18 AE 30 E 04 IP Camera 1 1 2 90806 20090609 1 1 1234567890123456789 90801 18822365 11 name 192 168 11 53 browse with IE 168111 9008 00 18 AE 30 FF 53 IP Camera 1 1 2 90806 20090609 1 1 DYRA 192 168 11 64 ger 168 111 2000 00 34 78 58 1F 3D DVR 2 6 5 beta3 20090717200
15. ator can register an email for receiving an auto generated email with the password in case the password is lost In order to retrieve the password the PC would have to be connected to internet Click OK button to enter the Login interface refer to Fig3 2 and input the password in the password text box If the user doesn t remember the password he she can press Get System Password button the password would be mailed to the preconfigured email address UserName SYSTEM Password Fig 3 2 Login Interface Click OK button to enter the Control Center The Control Center Interface is shown as Figure3 3 SYSTEM a 1 ANIA 3a DVR DVR GAMERAOM 1 CAMERA 01 I CAMERAO2 i CAMERAO3 Wi O CAMERAD4 il CAMERAOS il CAMERA06 i CAMERAO i O CAMERAO08 il CAMERAO09 iI CAMERAI0 i CAMERAT1 til CAMERA12 11 03 2011 16 34 06 11 03 2011 16 34 06 i CAMERAT3 ss MOVE camera a S ENEA T E E munia MER CAMMOO 1 My en i CAMERAIE a 2 E pr dong P P 4 i OG 1 1080P 25fp to 2 ee ii QO 2720P 25tps r Ee WIO 4 QVGA 4fps oF gt mun e a ii 3 VGA 25fps lt MOSEO 11 34 06 fom 23 2 3 18 EE HO GE Asem Alarm type Device name Channel NO Time Motion Alarm DYR CAM16 2011 11 03 16 32 28 Motion Alarm DYR CAM14 2011 11 03 16 32 28 Motion Alarm DYR CAM13 2011 11 03 16 32 28 Motion Alarm DYR Pe CAM12 2011 11 03 16 32 28 Motion Alarm CAM1
16. configure cameras PTZ etc view live images record take backups etc It possesses three main functions Preview the live site System configuration and Video search covered in section 4 2 Installation 2 1 System Requirement amp Supported Operating System Operating system Comments Windows XP Windows XP SP2 or latest Directx 9 0c or higher amp Supported Browser Operating system Comments Microsoft Internet Explorer v6 0 IE 6 0 with most updated service pack Microsoft Internet Explorer v7 0 IE 7 0 with most updated service pack 2 2 Computer Hardware Requirement Recommended PC Specifications 4 channels Item Specification Intel Pentium 3 0 GHz or AMD 3000 160GB Recommended PC Specifications 8 channels Item Specification Intel Core 2 Duo 1 8 GHz or AMD Dual core 3800 250GB MS User MANAI amp Recommended PC Specifications 16 channels Item Specification CPU Intel Core 2 Duo 2 2 GHz or AMD Dual core 3800 HDD 250GB Note amp The mentioned specifications are provided considering CIF real time resolution The AMD chip hyper 3800 and X64 series are not tested eFor real time live view with CIF resolution max 25 channels can be played concurrently eFor real time view with D1 resolution max 6 channels can be played concurrently 2 3 Installation Process a We would recommend that the anti virus software is disabled before initiating the installation
17. d kap _ gavel tomater ag 30 31
18. e refer to chapter 4 4 E Map for more details 4 3 5 User Manager An administrator can add several users and set the access rights for each user To add users to operate the CMS please enter Into System Configuration gt User Manager interface 20 UWL USer Manual Function List Add user Modify Password Delete Users 4 3 5 1 Add User Configuration Steps i In System Config menu click User Manager button li Click Add User Es button and the dialogue of Add User will pop up lil Input user name and password in the text boxes IV Click Confirm button to add user successfully V Set authorization for the added user such as PTZ local playback and backup local record E map and so on 4 3 5 2 Modify Password An administrator can reset the password of a user to the default password However in order to change the password a user would need to login from his her account and then modify the password from User Manager The following will introduce the steps to modify the password from user login Configuration Steps for modifying a user password from the user login Login from the user s account ee ii In the User Manager interface click modify amp button and the dialogue box of modify password will pop up Fig 4 11 Local basic config User Mame EE Mew Password lil Input current password new password and confirm the same in t
19. et in Server Config Configuration Steps I Enter into E Map interface Il Select a map from the map tree lil Double click on the blinking camera to view the live images IV Click Exit button to exit the display of live images If a user selects Auto preview when alarm item in the map configuration interface the live image will automatically pop up when in an alarm condition If a user select Auto switch alarm map item in the map configuration interface the alarm map will be displayed when you enter into the E map interface Users can right click on the map alarm display area for the following operations Return to parent map return to parent map from a sub map Full Screen For a full screen mode it can be displayed on the primary monitor or the secondary monitor Exit Full screen click Exit Full screen to exit from full screen mode 4 5 Video Search Click Video Search tab from the main taskbar to access the interface The main functions of video search are video Playback and Backup 23 4 5 1 Video Playback Supports Local Playback and Remote Playback Playback Renee Remote Playback SJEME Playback Select device Record Type En Date Select ite Search E Fig 4 14 Remote playback Users can search and playback video files of different channels for different dates Users can select a maximum of 16 channels for simultaneous playback This system supports local p
20. g list save Half a Month i Operator log save Show Alarm Event list Other Contig Serial Fort NULL w Baud Fate 4800 w synchronize with PC time User Name honging O Per day Days Password Restart Time 354211 2 Time PL Restart Config PC Auto Restart Version Information Software Version 1 8 0 0 Fig 4 10 Local Basic Configuration In the Local Basic Configuration interface users can configure parameters for live image display recording local alarm log list PC restart The user can also view the version of the software Configuration Steps i Inthe System Config menu click Local Config icon li The Local Config screen would be displayed lil Select Local Basic Configuration tab IV In the Live Config box set values for Dwell Time Snap picture number and Title V In the Record Config box users can enable or disable the record recycle and select the default partition for saving the recorded files Vi In the Local Alarm Config box set Alarm Holding Time and Post alarm record time Vil In the Log List Maintain box set the parameters for alarm and operator logs Vill In the Other Config box user can do settings for serial port and time IX Users can set control center time by manually or select Synchronize with PC time x The PC Restart Config box allows setting parameters for restarting t
21. he PC automatically lf activated the user would be able to input login user name and password of the PC and the frequency and time for restarting the PC 4 3 2 2 Local Schedule Configuration Schedule recording means recording as per a fixed schedule In local Schedule Config interface 17 UWL USer Manual users can set weekly schedules for each channel The user can set time periods for each day of a week Configuration Steps 4 3 2 2 1 Week Schedule Configuration i On Local Configuration interface select Local Schedule Config tab it will display Local Schedule Config interface li Select a camera from the device list to configure the schedule and click 2 button li Select a day of the week and then drag the mouse to select a time zone The user can create multiple time zones for a particular day T 1 2 3 4 amp G T ha g 10 11 12 13 14 15 16 17 18 18 20 21 22 23 24 Note Ruler means 24 hour one of a day the least time frame that can be selected is 15 minutes 4 3 2 2 2 Holiday Schedule Configuration User can also set certain dates as holidays and configure the time zone for the same Select the camera from the device list li Add a date in Holiday lil Click Z button and use the mouse to set the schedule for the holiday 4 3 2 2 3 Local Alarm Configuration A user can configure the CMS for recording based on a motion detection sensor alarm or video loss alarm Configura
22. he respective fields IV Click OK to change the password To reset a password of a user from an administrator account para Select the user from the user list click Change Password amp button and confirm to reset the password to default value 4 3 5 3 Delete Users 21 CMS USer Manual The administrator can delete the users Configuration Steps i In the User Manager interface select the user to be deleted ii Click Delete button and confirm to delete the user 4 3 6 Log Query A user can check logs pertaining to alarms and CMS operation Following is an example of log query Configuration Steps I In the System Config menu click Log Query amp icon to access the Log Query interface ii Select Log Type as Alarm lil select an alarm type from the alarm dropdown box IV Select the date and time for the records to be checked Note Users can query the data for one date at a time SS V Click M icon to select a particular channel for the query Vi Select the required channels and Control Center Log as per the requirement Vil Once selected click VA button the interface would search the information as per the set parameters and display the same on the screen 4 3 7 Export amp Import Local Config A user can export or import local configuration Tollowing is an example Configuration Steps p I In the System Config menu click Ex
23. ion Users may set regions A region is used to indicate the location of a particular device Configuration Steps i Click Device Manager k in system configuration menu it will display Device Manager interface li Click i button it will pop up Add Region dialog box Input the region name in Region textbox iii Click OK button it will display the added region in Device List Note In order to add a sub region the user would first have to select the parent region and then add the sub region by default a new region is added under Global region 4 3 1 2 Add Group Chanel Group is used to create a group of cameras Configuration Steps 7 I Click SIE button in Device Manager interface to pop up Add Group dialog box ii Input group name in Group Name textbox Click OK button to create the group Once the group is added it would be displayed in 13 CMS User Manual i Pam Device List 4 3 1 3 Dwell Setup Dwell Setup allows setting dwell function for channel groups Configuration Steps 1 In the Device Manager interface click z button it will pop up Dwell setup dialog box Refer to below picture 30 Seconds 2 Minutes Fig 4 8 Dwell Setup 2 After selecting groups user can set the dwell time for each group options 5 10 20 30 60 seconds or 2 minutes 3 In the Live interface click Dwell icon to dwell Refer to below picture
24. kup record files by time user needs to set the Start time End Time and select Channels 25 oM User Manual Sy ica I On Video Search toolbar click Backup Il Select By Time option to backup the record files based on date and time iii Select the required date and time for the record period oy V Click P button to select the channels V Click OK button to go back to Backup Interface Ey vi Click 7 button to begin searching and backing up the record files Note he user can define the backup path as required 4 5 2 2 Backup by Event For taking backups based on events user needs to set Start Time End Time and Record Type and select Channels Q i On Video Search toolbar click Backup eed li Select By Event to backup the record files based on events iii Select Date and Time iv Select the required events in Record Type box Schedule Manual Motion Sensor o v Click Y button to select the channels vi Click OK button to go back to Backup Interface vii Click VA button to search the record files vili Select the files required to be backed up from the listed files Ey ix Click 7 button to backup the files Note he user can define the backup path as required 5 Use method for IP TOOL Note Do not power off or Internet failure when updating If the upgrade fail and lead to device unable to start which needs to retrofit Fir
25. layback and remote playback The local playback refers to playing recorded files which have been saved locally i e the computer The remote playback refers to playing the recorded files from the DVR Although these two types play recorded files from different paths they have the same settings and control operations Here we take remote playback for example Please refer GUI objects for the playbacks Number Buttons Meanings button to iay record files Pause button While playing click this button to stop playing To Sep button When in play or pause mode click this button to stop Playing Speed button When playing click this button and select playing speed with the drop down menu available options 1 4X 1 2X 1X 2X and 4X Next Frame button when in pause mode adjust the required channel to single channel display mode and click this button to play frame by frame Playing Scale Marker 4 Once a recorded file has been searched a user can use this scale on the time line for a precise time for playback Right click on the marker pointer to amplify or contract the time scale record of a channel for packu End of backup stamp button Select it to end the backup stamp Erase backup stamp button Select it to clear up its backup stamp Backup button Select it to backup the record during the period of start of backup stamp to end of backup stamp 24 UVLO USer Manua Configuration Steps
26. leshooting 1 Solutions for installing CMS system in Windows Server 2003 Windows 2007 Window XP and Vista environment In case the VGA driver is not installed correctly the CMS software screen would appear to be incomplete The screen may also flash Below are the steps to address the same 1 Click Start button enter the dxdiag command into the Run column and press Enter button the DirectX Diagnostic Tool interface will pop up refer to Fig 6 1 CMS User Mani S DirectX Diagnostic Tool 3 Ed System Direct Files i Display Sound Music Input Network More Help Device Drivers Mame ATI Radeon X 1300 Series Main Driver sti dvsg dl Manufacturer ATI Technologies Inc Version 6 14 0010 6925 Emglish Chip Type ATI Radeon x 1300 Series 0x791E Date 4 27 2009 20 41 00 DAC Type Internal DAC 00MHz WHOL Logerd nia Approx Total Memory 320 0 MB Mini YOD ati mtag sys Current Display Mode 1024 x 768 32 bith 75Hz VOD nja Monitor Plug and Play Monitor DET version 9 or higher Directs Feabures DirecbDraw Acceleration Enabled Test DirectDraw Direct Acceleration Enabled Test DBirect3D AGP Texbure Acceleration Enabled Mo problems Found To test DirectDraw Functionality dick the Test DirectDrave button above Totest Diract3D functionality click the Test Direct30 button above Fig 6 1 DirectX Diagnostic Tool under Window XP Click Display tab to check
27. manual Vil Click OK button the added DVR would now be listed in the Device List Please refer to the following instructions for adding device I This icon denotes region or group it denotes a device it denotes channel II Once a device has been added users can add the channels of the device to the relative channel group by selecting the channel group in Channel Group box and clicking EN button User will have to turn off the live view first and then add the channel to the group lil Channels of every added device would be listed below the device name 4 3 1 5 Modify Users can modify region group device and channel names Steps I Modify Region In device list select the region and click P Dox amp Input new region name in Region textbox Click OK button to modify the Region name button it will pop up Modify Region Info dialog li Modify Group amp In camera group list select the group and click P button it will pop up Modify Group Info 15 UVLO USer Manual dialog box Input new group name in Group Name textbox Click OK button to modify the group name lil Modify Device In device list select the device and click P button it will pop up Modify Device Info dialog box amp Input new device name in Device Name textbox Click OK button to modify the device name amp The user can also modify the username and password for the device
28. om the windows menu e g Start gt Programs gt ControlCenter3 Uninstall 3 COMS User M anual 3 The programmed can also be removed by running the software setup and then Remove option nane opting for Welcome Modify repair or remove the program Welcome to the ControlLenter Setup Maintenance program This program lets you modity the current Installation Click one of the options below f Modify Select new program components to add or select currently installed components to remove Reinstall all program components installed by the previous setup C Remove A Remove all installed components Next gt Cancel 3 Login and Exit 3 1 Login After setting up the Network Video Surveillance System and installing the Control Center program the user would need to login to the Control Center for configuring the devices Steps for logging in are described as below Double click EO icon on the desktop it will pop up create SYSTEM password dialog box referred to Figure3 1 Create SYSTEM password Mew Password fF E Confirm please Input email address password would be sent to this account in case password forgotten To Email fF OE test pour account setting Figure 3 1 Create SYSTEM password 4 The default username is SYSTEM A user can create an alphanumeric password max password length is 32 characters Click on the options button to expand the window An administr
29. password again to input remarks cuss Use RI Hemarks Remarks Max char 200 File linker Device name to T Verity Close Then click OK button 4 1 4 System The system tab displays the Camera Display List which is used to display the added devices User may Click Device List or Camera Group page to switch to display mode Figure4 2 refers to the DVR aligned according to the device list User may drag device from the Device List to the operation area for the GUI setup Figure4 3 displays the DVR aligned according to the camera list User may drag the group to operation area for watching all camera of this group SYSTEM a 9 CaMD CAMDI O CAM caw gr CAT O nn 2 cmon 5 gp CAMO 0 CAMD Devio List fee Figure4 2 Device list 3 Group H R CM it CAMO i CAMO Qe Channel Group Figure4 3 Camera group Please refer to section 4 3 1 for adding regions group or devices etc 8 CMS User Manual lel ri Notice Before switching the display mode user needs click button first to turn off the live display of images 4 2 Preview The Live section of the interface provides toolbars for viewing the different channels and controlling PTZ cameras Local View In the operation area users can view live images select automatic dwell take snapshots and close all previews etc The toolbar buttons are described as in the following table No Buttons
30. port amp Import Local Config LEE icon to access the Export amp Import Local Config interface Il Click B icon to choose the path to save the export file or to import the configuration file iii Click Export or Import button to export or import the configuration file iv After finishing the above operation click Exit button to escape the current interface 4 4 E Map E Map is used to stimulate an area under surveillance using pictures and maps 22 CNL USer Manual 4 4 1 Change Icon Configuration Steps i Click EMa button to enter into E Map interface ii Select a camera on the map right click and choose change Change Icon iii A Change Icon dialogue box would popup select an icon and click OK to change the icon of the camera 4 4 2 Delete camera Configuration Steps i Click EMa button to enter into E Map interface ii Select a camera on the map right click and choose change Delete lil Click Yes on the confirmation box to delete the camera from the map Note The above mentioned steps must be made after a user has added E map and camera in the map configuration interface 4 43 Map Alarm Map alarm refers to a visual alarm in the E Map Once set the camera in the map it would blink when in an alarm condition However this would involve linking of camera with the alarm event in the Local Config and the schedule for the alarm type should be s
31. st install the CMS software IP Tool icon icon an information dialog box will pop up as below WESwill display on desktop double click the IP Tool 26 CMS User Mani r priy diett hund pleie made surr that pou dent run Cornia ariii sofware Dema rare IP Address Dubra Maik Gater Giese Pot MAL Dexe Tepe F rssase vermors Baki heres Detia r udardard 19162115 Sea 0600 8 ORAL DO iF Cones 11 2 Tit ES ii ve 192 16211 45 AN 152163111 og IRAE DEE GA IP Cane 112 a nen 11 MR 192 1 8357 2 TA an 157 16231 2000 123055 70376 DYH ZEG b AUS 0 00809127 13 SDR 192 16811123 SSS 121 2211 OIRA 2002 DYR cha TSS St 12 Pu 1 16232109 ee 11681 2000 Miso VA ae WR 19183132 IRN 11691 2000 must DWA 27 beta sner 0092 12 FA 192168 325 2 2 1 192 15231 SA MO WEL 00189 IF Carre 112 ETE 20090609 iI tithe 132 e219 Se 19216831 1160 MIST ARE Sps 191611 14 Soe Tae e MARTE FP Cone 11 2 Sit ee ii TEASE TES 2 E VER 1148 ann nn TVR SE DIE SBS IF Cars 1 12 em TERTE 1 1 ne 19828 16811 83 feo VE TNT KE Chee IFRS IF Cores 112 7a 05085 1 1 RA 182 16211 64 gaa te er 192 168101 2000 OTRA NFD DR 26 Giss aa 200002 2 R 152 168 11 65 KAN 19168111 2000 Muse DE DA 2b b betas 0 MO 20080912 iz Dr 192 VER 1768 mra TATEN Jin MBA SAN DYR 25 6 Beta SO EDEN la uyar 198 tT dad 15216111 008 OASE ONE IP Gare 112 oe DE hi MR 198 168 11 74 Soe 14168111 2000 OSE SEA DYR 2 EG betad N 2006 i Rt 15161182 SAAS 14168111 2000 murens DA 64 oO 16 20080912 iz DR TAR VES 1185 I P
32. te Software Cancel Click OK button exit the update dialog box the device will restart automatically Select the device right click Update kernel a dialog box will appear as below name 192 168 11 45 255 255 255 0 192 168 11 1 3008 00 18 AE 30 EE 04 IP Camera 1 1 2 90806 20090609 1 1 aun 3008 PCamera 112 90801 18822385 name 192 168 11 53 168 11 1 9008 00 18 4E 30 FF 53 IP Camera 1 12 90806 20090609 1 1 DVRA4 192 168 11 64 network setup 168 11 1 2000 00 34 78 58 1F 9D DVR 2 6 6 beta3 20090717 20080912 12 DYR 192 168 11 66 Update Software 168 11 1 2000 00 18 4E 20 2E 21 DVR 2 6 6 beta3 20090710 20080912 1 2 DYR 192 168 11 68 EEE 168 11 1 2000 00 18 4E 51 23 44 DVR 2 6 6 beta3 20090710 20080912 1 2 name 192 168 11 69 EIR EIS 168 11 1 9008 00 18 4E 30 01 3B IP Camera 1 1 2 90806 20090609 LAL 28 CMS User Manual Update Kernel IF 192 168 11 48 Fort J008 Update File Update Kerel Enter into Update Kernel interface dialog box input admin in the User name text box input 123456 in the Password text box and click Brower to select the Update file mboot8180 8180 click Update button to start updating When upgrading doesn t disconnect PC to device make sure power is on The update progress bar will display as below Update Kernel Eg Pon Vanuuunnwununnuunnunnumnmunnmumumumunumnmumumum n Update finished a message box will pop up After a while the device will restart automatically 6 Troub
33. the interface by clicking the lock icon 4 12 Minimize amp Maximize Click to maximize Control Center window Click Cl to minimize Control Center window or re size the Control Center to original size MS User Manu 4 1 3 Alarm Display In the alarm display interface a user can view information pertaining to the alarms It includes Alarm Type Device Name Camera Number and Alarm Time events like video loss motion etc Alarm Display List is shown as Figure4 1 F Alarm type Device name Channel NO Time A Stop Motion Alarm OWA LAME 2011 11 04 10 31 39 Stop Motion Alarm DWR CAM 2011 11 04 10 31 39 Stop Motion Alarm DYR CAME 2011 11 04 10 31 38 Stop Motion Alarm DYR yi CAME 2011 11 04 10 31 38 Stop Motion Alarm DYR CAM3 2011 11 04 10 31 38 Figure4 1 Alarm Display List When sensor alarm is triggered there will be a blue square twinkling as am icon The digital number in this square means the amount of alarm event Double click this icon to pop up the detail information of these alarm events as shown below Alarm event Device name Alarm type Time name Sensor Alarm 2011 11 03 16 50 24 Select one alarm event and click Verify button to pop up a dialog box Verify password Please input the password to handle this alarm event Alarm event Device name Alarm type Time Status name Sensor Alarm 2011 11 03 16 50 24 After this event is verified please click Close button and then verify
34. tion Steps In the Local Configuration interface select Local Alarm Config tab ii Select a channel from the device list lil Select the Alarm Type Note In order to select sensor based recording alarm select the device from the device list and the sensors would be displayed in the Alarm type box IV Once an alarm type has been selected the user can trigger PC Audio Alarm Channel Recording or link it to E Map applicable to motion and video loss alarm only Note Alarm Trigger Local Sound Alarm E Map Alarm and Trigger Channel Alarm A particular alarm can be set to trigger a local sound alarm on the CMS Sound alarm can be triggered by sensor alarm motion detection or video loss E Map Alarm refers to triggering an alarm on the E Map Once an alarm has been linked to an E Map the selected channel camera would appear in alarm state in the E Map For further details please refer to section 4 3 4 1 6 Set Camera 18 CNL USer Manual The user can also trigger recording of channels using alarm inputs From the device list select the device and configure the Alarm Input Sensor and the trigger mode This can be set to raise a PC Audio Alarm or and record channels 4 3 3 Server Configuration The customer can configure a DVR using the Server Configuration interface Please refer to DVR s manual as configuring the DVR through CMS is similar to the manual configuration 4 3 4 Map Configuration A
35. user can upload maps of the area associate different cameras with different regions of the map area and set alarms This provides a GUI which helps the user to relate it to the actual site locations In the System Configuration click Map Config to access the interface In Map Configuration users can add or delete e maps modify map names Functions List Add Maps Add Sibling Nodes Add Sub Nodes Modify Map Names Delete Sub Nodes Set Camera 4 3 4 1 1 Add Maps Users can add several E Maps in the E Map Configuration Steps i In the System Config menu click Map Config S button and then right click on the Map tree to access the sub menu li From the sub menu select Add Map and enter the name of the map in the textbox iii Inthe Path box click a button and the Open dialogue box will pop up iv Select the path of E Map and click Open button to confirm path v Click Confirm button to add E Map in Control Center 4 3 4 1 2 Add Sibling Nodes Users can add E Maps under the same parent map as Sibling Configuration Steps i Inthe Map config interface right click on an existing map li Select Add Sibling Node and then a dialogue of Add Map will pop up lil Input name of the map 19 CNL USer Manual iv Inthe Path box click amp E button and the Open dialogue will pop up v Select the path to save the E Map and click
36. ws Master stream Second stream Turn off the live Start Manual Record Stop Manual Record Enable audio Fig4 6 Right key sub menu Stream Enable the master stream This machine supports master stream and second stream Master stream has higher frame rate max 25FPS for every channel but it needs higher network bandwidth Second stream has low frame rate max 6FPS for every channel it requires low network bandwidth Therefore user can select the stream according to their bandwidth Turn off the live Click this option to stop displaying the live images Start Manual Record Select a channel and click Start Manual Record this will start recording the channel Click Stop Manual Record to stop recording Enable audio Click this to activate the audio for the channel 4 3 System Configuration The System Config tab provides an interface for system configuration This includes Device Manager Local Configuration Server Configuration E Map User Manager Log Query and Decoder Card CMS USer Manual Function List Device Manager Local Configuration Server Configuration Map Config User Manager Log Query Export amp Import Local Config 4 3 1 Device Manager User can add regions groups and devices to manage all DVRs in the network Once the regions groups and devices are added they would be displayed in Device List Function List Add Region Add Group Dwell Setup Add Device Modify Delete 4 3 1 1 Add reg
Download Pdf Manuals
Related Search