Manual EN - Caliber Europe BV
Contents
1. 2 Press button repeatedly until BT AUDIO appears on the TFT function If the audio device is the connected or no audio device is connecting with this unit after mode changed to BT AUDIO mode the below display will show on TFT If after 20 seconds time out still cannot find any audio device for connecting the below display will show on TFT Bi Fiacda 3 Once in the BT AUDIO mode user can use the audio device to start playback the song via Bluetooth wireless with this unit When mode change to BT AUDIO mode some of the audio device may auto playback the music without operate the music playback operation and some of the device like mobile phone may need to first change into the Media Player mode on the mobile phone otherwise the song cannot be direct playback via Bluetooth wireless If the auto playback not support on the audio device then please refer to the instruction manual of the audio device on how to operate music playback via Bluetooth wireless technology Bluetooth Operations m Operating an audio device with this unit AVRCP Audio Video Remote Control Profile This unit can perform the following operations with the connecting Audio device which supports AVRCP Audio Video Remote Control Profile amp only if the Audio device does support AVRCP 1 Start playing Every time when user change mode into BT AUDIO mode this unit will automatically send a PLAY command2. cal Lae OWNER S MANUAL HMI 3 5 TFT HUMAN MACHINE INTERFACE IN CAR MULTI MEDIA PLAYER RECEIVER MCD 786 COMPACT DIGITAL AUDIO Lj wv ES ar Z Unit picture BUTTON LESS TOUCH PAD PANE This radio is equipped with the most advanced TOUCH SENSE PANEL so that it is easy and convenient to use while driving TIPS Here are some tips to show you how easy it is to use this touch sense panel Mi Using a very light touch on the radio panel will activate that feature You will not need to PRESS hard on the panel to make this radio change features B Some ofthe buttons that have dual functions will need to be TOUCHED from 2 to 3 seconds to activate the second level function Mi Thebest area to TOUCH on the panel to make it activate is the illuminated or lighted area For example just touch the illuminated to play the next track or return to the previous track Warnings When Driving Keep the volume level low enough to aware of the road and traffic conditions ACAUTION In some countries it s unlawful to operate a vehicle while video is displayed in the driver s viewing area Please always switch the unit s display to Font Type Display mode by pressing the DISP button while driving For safety reason the driver should only enjoy watch the video while the car is in parking mode When Car Washing Do not expose the product to water or excessive moisture This could
3. FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE USE ONLY THE RECOMMENDED ACCESSORIES 3 THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION This product incorporates copyright protection technology that is protected by method claims of certain U S Patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited E 2 Installation INSTALLATION CAUTION Removing the unit 1 Before finally installing the unit connect the wiring temporarily and make sure it is all connected up properly and the unit and system work properly 2 Use only the parts included with the unit to ensure proper installation The use of un authorized parts can cause mal functions 3 Consult with your nearest dealer if install ation requires the drilling of holes or other modifications of the vehicle 4 Install the unit where it does not get in the driver s way and cannot injure the passenger if there is a sudden stop like an emergency stop 5 If installation angle exceeds 30 from horizontal the unit might not give its optimum performance 6 Avoid installing the unit where it would be subject to high temperature such as from direct sunlig
4. Simple Profile ASP Supported file format MP4 and M4a audio only m Unsupported Discs 8 cm Disc CDV CDI CDG LD DVD RAM Note on Region Code DVD players and DVD Video discs have their own Region Code numbers This unit can play the disc of all region AL code numbers Disc Maintenance Before playing wipe the disc using a clean cloth working from the center hole towards the outside edge Never use benzene thinners cleaning fluids or anti static liquids or any other solvent NOTE A disc may become somewhat scratched although not enough to make it unusable depending on you handle it and conditions in the usage environment Note these scratches are not an indication of any problem with the player Label side Up Y Do not bend A 0 Never touch the under side of a disc Wipe the disc surface from the center to the edge Media Player Operations Disc USB SD Memroy Card aeneral Operation m S SOURCE BUTTON Press S button to select Disc USB SD Memory Card then press SEL button to start playback the Media Player gt PLAY PAUSE BUTTON Press button to suspend music play Press the pause button again to resume music play L LIST SETTING Press 5 button to view the songs list and rotate the encoder knob to select the desired song then press the ENTER button to play gt 44 TRACK SELECT Use these buttons to move to the next track on the
5. With The Paired Bluetooth Device By Following Operation Once any BLUETOOTH device is paired with this unit user can select this PAIRED device to be connected or dis connected this is called Connecting Bg Re Connection This unit will automatically Reconnect with the paired device in the following conditions 1 Every time the ignition key is turned from off to on this unit will automatically reconnect with the last connected Bluetooth Device 2 Every time when user short press O the button to confirm the dialing of an outgoing call this Unit will automatically reconnect with the Mobile Phone once Only if this Mobile Phone has been paired with the unit previously However in some conditions user needs to reconnect manually For example 1 This unit lost the connectivity with the Mobile Phone or the Bluetooth device If the Bluetooth icon BT disappears from the display it means the connectivity of the Bluetooth device with this unit is lost 2 Some models of mobile phone after the call transfer mode is activated and call is transferred to the Mobile Phone the connectivity will be lost with this unit 3 User has paired with more than one Bluetooth devices in the list and want to reconnect with one of them again This unit can Paired up to 8 devices each for Handsfree and or Audio Devices User can reconnect the paired device by the following method 1 Access into the SYSTEM MENU of BLUETO
6. can capture images and store them to set as wallpaper 9 e 3 a Press this button to viewing the function list aries D PBC When playback the Video long press this button to enable disble PBC function e o oe GOTO Underthe DVD mode press this button to pop up the search Menu ZOOM When playback the DVD press this button repeatedly increases the magnification level Under DVD mode press this button while playing a scene recorded with multiple angles to change the angle e O DIMMER Press this button adjustthe screen brightness INFO Press this button to viewing the information e Under DVD mode press this button during playbackto change the audio language Under DVD mode press this button during playback to turn on off subtitles and change the subtitles on e Qo c UJ a r m 9 Under DVD mode press this button to bring up the Title Menu E 10 System Menu Operations Cmm Long press the Menu center vol button button to access the System Menu mode then user can rotate to selectthe desired mode 1 Level Rotate Volume Knob to adjust the Subwoofer lever from OO to 12 2 LPF Rotate Volume Knob button to adjustthe Low pass filter LPF as Flat 80Hz 120Hz or 160Hz 1 Level adjust the Bass level from 06 to 06 2 C Freq adjust the Bass center There are few menu item
7. menu there are have below options for selection s 1 Level adjust the iXBASS level from Low Middle or High 2 PFREQ adjust the iXBASS peak 2 If Rear Zone R Zone is selected rotate the encoder knob to navigate through different modes Tunner gt DVD gt AV 1 gt AV 2 gt BT are available for selection of the Rront Zone or AV output frequency as 400Hz 800Hz or 2 4KHz System Menu Operations Preset CH PresetEG Setting Setting Display seting Display Setting Under the Preset EQ Setting there are have 9 Under the Display Setting menu there are have below options for selection different types of preset equalizer available for user selection Once access into the EQ menu rotate the encoder knob to navigate the following EQ setting Ras POP COUNTRY JAZZ REGGAE Tuner Setting ET TTT ay Under the Tuner Setting menu there have below options for selection AF TochangeAFOn Off ITA Tochange TA On Off TA Seek To change TA Seek On Off When TA function is activated if a TA Ve N program is tuned in the volume level will automatically set to this set up volume regardless of the volume level of the current mode Region When Region is On then during an AF search or PI seek it will im plement to station which have all the PI codes which are the same as the current station When Region is Off then during an AF search or PI seek the regional code in th
8. mode Profile of this unit is not able to activate the Bluetooth audio streaming A2DP User can listen to music files on an audio device on this unit if the audio device supports A2DP Advanced Audio Distribution Profile of Bluetooth Technology Please read the below instruction before operating the Bluetooth Audio streaming function on this unit Connecting A Bluetooth Audio Device With This Unit Before using audio device to play music on this unit the audio device must be paired with this unit first For the details operation of Pairing with this unit Please refer to the PAIRING operation for more details How to use the Bluetooth Audio Device to pair with this unit please refer to the instruction manual of the Bluetooth device If the audio device has both HFP Hands Free Profile and A2DP Advance Audio Distribution Profile this unit will automatically pairing these two profiles at the same time For exampl if a mobile phone has both HFP amp A2DP profile and this mobile phone is already HFP paired with this unit in this case A2DP audio device pairing is not necessary And this paired mobile phone will be added automatically to the list of Paired Device Audio ofthis unit m Listening To Music From An Audio Device In This Unit 1 Connect this unit with the audio device For the details operation of connecting with this unit Please refer to the CONNECTING operation for more details
9. via AVRCP to the audio device to command the auto start playing song in the audio device The PLAY command may differs depending on the Audio device If the Audio device is not able auto start playing song after changed mode into BT AUDIO mode user may need to operate the PLAY mode on the audio device to start the song playback 2 Track up down by pressing the Q O buttons on this unit 3 Pause Play by pressing the button on this unit 4 Volume up down by rotating the knob on this unit 5 Audio Mute by pressing the Q button on this unit 6 Stop playback by changing mode into any other mode of this unit The AVRCP operation may differ depending on the audio device all the other operation other than those listed above should be performed on the audio device Handsfree Phoning While Bluetooth Audio Streaming If the connecting playback audio device is a mobile phone all the hands free function is still available under the Bluetooth audio streaming like the answering incoming call making an outgoing call etc Disconnecting An Audio Device With This Unit User can close the Bluetooth Audio connection by disconnecting with the audio device The details operation of disconnecting with this unit please refer to the DIS CONNECTION operation for more details Specifications TFT Screen Section Screen Size 3 5 Measured Diagonally Screen Type TFT Liquid Cry
10. 7 HT VEROSA System Menu Operations Tips User can select the paired Mobile Phone from the list for dis connect or delete it from the list please refer to page of Pairing Connecting And Deleting With A Bluetooth Device This unit allows user self capture Tes l from VIDEO or JPEG picture User SUO n me Menu w Cispiayca Ul di Device of Paired Audio Device with this can select these 10 pre loaded uni pictures set as Wallpaper Note If doesn t like the pre loaded i i pictures you can press e button Audio Device This unit factory default 10 pre loaded images User can select these 10 pre loaded images set as wallpaper on the playback mode n el In this Menu will displayed the list age ve of Paired Mobile Phone with this unit In this menu user can select his her favor image Note This unit can paired up to 8 use as wallpaper on the playback mode There devices with Handsfree and or is two sources of image for selection Audio Device to select Erase Current or Erase All Tips User can select the paired Audio Device from the list for dis connect or delete it from the list please refer to page of Pairing This feature allows user to check Connecting And Deleting With the remaining memory capacity A Bluetooth Device of images for capture Auto This unit is default in off mode Tips This unit max can capture Answer If On peg the unit will 10 images and pre store into My automatically a
11. BT70 amp confirm to start the pairing process 3 Once the below display show on the TFT press the button to confirm amp start the pairing Please make sure to keep the PAIRING BLUETOOTH device within 2 meters from this unit when making the pairing To cancel the Pairing you can press the CLEAR button at any time 4 Press 6 Password Input user can input minimum 1 amp up to maximum 4 of any numeric number between 0 to 9 as the password for this unit button to confirm the password input and the Pairing process should start In the pairing Bluetooth device user should input the same password which was input as above in step 4 Ifthe pairing is successful the below display willbeshow on TFT Nokia 6230i If the pairing failed the below display will be show on TFT for3 seconds and the unit will automatically switch back to the previous mode If this unit is connected to a BLUETOOTH device this unit cannot be detected searched by another BLUETOOTH device User should first disconnect the current connected device in order to allow this unit to be detectable searchable by another BLUETOOTH device During the PAIRING only the Clear Volume amp Mute buttons are functional all the other function keys are disabled amp non operational during the pairing mode Bluetooth Operations I Connecting User Can Dis connect Or Re connect
12. CD The selected track number will appear on the display Press and hold the these button for more than one second to fast forward or fast rewind through the media CD play when the button is released m INFO BUTTON Press INFO button to view the ID3 information F FUNCTION BUTTON Under the Function menu there are have below options for selection If select One Unit will play the current song file repeatedly Select Off to cancel repeat function Random During the disc playback select random On to play all tracks on a CD in random order select random Off will stop the random play Setting the Default on will reset all options of Media function setting to factory defaults setting Insert the USB Stick A CAUTION This unit does not support any portable Hard disk drive WARNING Before remove the USB stick from the front panel Always remember to switch off the unit s power or switch to other mode then remove out the USB Stick Never try to remoe the USB Stick while playing music file on the USB stick It may damage the USB Stick and may cause permanent damage to the unit will caused the unit system lock up nsert the Memory Card Mode Change to Memory Card After a SD or MMC card was inserted into the main unit card slot Press button to select card mode The unit will starts playing the files contained on the Memory Card Once the uni
13. LE LIST Under the Media player mode press this button to list searching O of Tracks or Files on the Media playback mode DVD MP4 LIST Under the DVD MP4 mode press this button to list searching of DVD Root Menu or Files on the playback mode DISPLAY Press this button briefly will be enter the Motion picture display mode and Clock Date dispaly CAPTURE During video image playback press this button can capture i images and store them up to 10 images to set as wallpaper You 1 can also capture an image from an auxiliary video device if i connected E 7 Name Of Buttons and Theirs Functions Press this button to eject the Disc Long press this button to entering adjust the panel viewing angle TUNE UP DOWN Under the tuner mode press and hold momentarily to enter into the Auto Seek Manual Seek mode amp FILE UP DOWN Under the Disc mode press these buttons to skip a chapter o i track scene image file FAST FORWARD Under the Disc mode press and hold momentarily to fast forward BACKWARD backward the video disc i SOURCE Press this button to select different source playback mode by rotate the encoder knob to select the desire playback mode i Once the desire playback appears press e Select button as 5 confirm the selection TRANSFER Under the Bluetooth Handfree mode long press this button to i enter into the transfer mode Q FUNCTION Press this button to enter into the fu
14. OTH MENU_Handsfree or Audio Device 2 Use to select between Handsfree and Audio Device If the reconnected device is a Handsfree device for example Mobile Phone once the Handsfree appears on the display then press the e button the list of paired devices should appears on the display On the paired list if a device is with the HT icon beside it it means this device is connecting with this unit now 3 Use the to select the device want to be reconnected then press e the button If the reconnection is successful the below display will show on the TFT Please see the SYSTEM MENU Operation for more details on how to access into SYSTEM Menu of BLUETOOTH Audio Device Please make sure to keep the mobile phone within 2 Meter from the unit when making the connection The manual reconnection is only available for those BLUETOOTH devices which have already been paired with this unit before Bluetooth Operations B Dis Connection User can disconnect the connected Bluetooth device as follows 1 4 Hold Press Use Access into the SYSTEM MENU of BLUETOOTH MENU 9 Handsfree or Audio Device to select between Handsfree and Audio Device If the device is a Handsfree Mobile Phone device once the Handsfree appears on the display then press the button the list of paired devices should appear On the list if the device is with the BT icon beside it i
15. anel Press the panel release button on the front panel DON T FORGET Always turn off the car radio before removing the front panel Panel Release button m Attaching the detachable front panel Attach the front panel at the right hand side first and then push the front panel forwards to A A ji lock it securely into place A NOTE If the D C P is dirty wipe off the dirt with soft dry cloth only And use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the D C P Connecting the System Wiring Diagram audio video Connections SUB WOOFER OUTPUT BLUE suB amp Wour mrt cn RC um DE WOGEEE Brake Switch PINK lt PARKING Connect to Parking Brake x BRAKE e 2 5m extension wire CAMERAVIDEO 1 INPUT YELLOW C VIDEOIN Wal VCR or DVD Lis or U lt GAME CONSOLE VIDEO 1 OUTPUT YELLOW I SIMILI TEFFE BEFIT CREDO FUSE Connecting the System qu O x D Not supplied FUSE O ANTENNA ira CABLE 20 PIN OM IM AUDIO POWER HARNESS See Figure 1 Not supplied RCA TO RCA m g GREY WHITE C3 CABLES 2 3g REAR un 5 gt os aso CHANNEL EC RED B ES i W 2 ug ee Si NS Cm l T S9 Fi BLACK WHITES i n FRONT mm 5 T E CHANNEL E lo lt b lesu V BLUE WHITE il il il IRE Connect to power amplifi
16. cause electrical shorts fire or other damage A CAUTION In order to avoid any accident the driver must not watch video while driving This unit is designed to not allow watching moving video while driving Park your car in a safe place and engage the parking brake before watching moving video When Parked Parking in direct sunlight can produce very high temperatures inside your vehicle Give the interior a chance to cool down before starting playback Use the Proper Power Supply This product is designed to operate with a 12 volt DC negative ground battery system the regular system in a North American car Protect the Disc Mechanism Avoid inserting any foreign objects into the slot of this player Failure to follow this may cause malfunction or permanent damage due to the precise mechanism ofthis unit A CAUTION THIS MOBILE DVD PLAYER IS A CLASS I LASER PRODUCT THIS UNIT USES A VISIBLE INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION IF EXPOSED DIRECTLY BE SURE TO OPERATE THE MOBILE DVD PLAYER CORRECTLY AS INSTRUCTED USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF PLEASE REFER SERVICING TO A QUALIFIED TECHNICIAN NOTE 1 TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE 2 TO REDUCE THE RISK OF
17. der Ignition On But Power Off condition user can set up the Standby display mode for below Off To turn off the unit Clock To display the Clock on TFT Fish To display the Virtual Aqua Screen on TFT Demo To automatically demo this unit s majorfeatures cyclicon TFT Gallery To preview the pre loaded factory default images which stored into My Gallery For details operation of My Gallery please refer to page of Wallpaper Setting Image To preview the captured images which stored in My Image For details operation of My Image please refer to page of Wallpaper Setting LJ A e End user can adjust the panel viewing angle of the display to obtain the optimum viewing angle inside the vehicle Long press the button to enter into the Angle options then rotate the Volume Konb to adjust the level 00 to 12 E 21 Bluetooth Operations This unit is integrated with the most advanced Bluetooth Wireless Technology Please read the below instruction before you start enjoy the Bluetooth functions available in this unit This Unit s Bluetooth Device Name Bt70 is the default device name of this unit BT70 should be displayed on the connected paired device The Bluetooth Profiles Supported By This Unit 1 HSP Head Set Profile 2 HFP Hands Free Profile 3 A2DP Advanced Audio Distribution Profile 4 AVRCP Audio Video Remote Control Profile The Bluetoot
18. desired staion to Recall m 4 4 TUNING UP DOWN BUTTON 1 Long press these buttons to access the Manual Seek mode 2 Press these buttons to access the Auto Seek mode INFO BUTTON Under RDS mode press INFO button to view the station information Media Player Operations Disc USB SD Memroy Card This unit can play various video audio format which stored into disc USB or SD Memory card on Media Player The following chart helps you to check if a disc is supported by this unit as well as what functions are available for a given disc type Biscfomat isc logo Digital Versatile Discs DVDs E Vi Video CDs VCDs Digital Versatile Discs Recordable DVD R Digital Versatile Discs Rewritable DVD RW DVD RW COMPACT Compact Discs CDs CD Recordable CD R DIGITAL AUDIO Recordable COMPACT CD Rewritable CD RW DIGITAL AUDIO ReWritable Audio Format Playback CD DA and MP3 or WMA digital music file on CD ROM or DVD ROM or USB or Memory Card Note of MP3 and WMA Support Maximum 2000 files Maximum 30 characters display Supported Sampling frequencies 32kHz 44 1kHz 48kHz Supported Bit Rates 64 256 kbps variable bit rate Video Format Playback IMAGE JPEG DVD Video MPEG4 on CD ROM or DVD ROM or USB or Memory Card Noted of MPEG4 Supported decoding MPEG 4 video defined by ISO 14496 2 Standard 1 Simple Profile SP and 2 Advance
19. e format PI code will be ignored A regional station is possible to be received Tuner This feature is used to designate Set the strength of the signals at which the radio will stop during auto matic tuning Distance is the default allowing the radio to stop at a broader range of signals To setthe unit to select only strong local stations during automatic tuning rotate the volume knob to select Local mode Tuner This option allows the selection of Area the frequency spacing which is most appropriate for the area this unit is used in Euro Europe Standby Under Ignition On But Power Off condition this unit have the following different types of Standby display for selection Off To turn off the unit Clock To display the Clock on TET Fish To display the Virtual Aqua Screen on TFT Demo To automatically demo this unit s major features cyclic on TFT e Gallery To preview the pre loaded factory default images which stored into My Gallery Tips For details operation of My Gallery please refer to page of Wallpaper Setting Image To preview the captured images which stored in My Image Tips For details operation of My Gallery please refer to page of Wallpaper Setting To adjust the TFT Backlight level between High Mid Low Information Setting This display is showing this unit system software version Panel V1 1_081107 TFe SK_A_OSBII0S TFeSK_VI 1_IlIee
20. elect the registered device and connectit this is called Connecting This unit can Paired up to 8 devices with Handsfree and or Audio Devices e lf the pairing Bluetooth device has both HFP Handsfree Profile and A2DP Advance Audio Distribution Profile This unit will automatically pairing these two profiles at the same time m Searching available Bluetooth Devices for Pairing from this unit 1 Access into the SYSTEM MENU of BLUETOOTH menu mode to activate the Pairing procedure Please see SYSTEM MENU Operation for into more details of how to access BLUETTOOTH Pairing mode 2 Onceselectthe Pairing mode pressthe button to activate the searching pairing device mode Please make sure to check the pairing Bluetooth device make sure the Bluetooth mode is turned ON and the VISIBILITY is set to SHOW Stored image may differfromthe original aspect ratio due to compression or elongation To cancel the Pairing you can press the button at any time CLEAR 3 When searching is completed the detected device name s will be displayed in alist 4 Usethe button to selectthe device name which want to be connected paired 5 Press button to start the Pairing with the selected device in the list 6 Password Input user can input minimum 1 amp up to maximum 4 of any numeric number between 0 to 9 as the password for this unit 7 Press button to confirm of the pas
21. en on the playback mode This function is called wallpaper change User can select the desire image on the below operation to set as wallpaper How To Select The Image Access to the System Menu and press IMAGE Menu the below TWO location are available for images selection My Gallery There is total 10 factory default images for user select use as wallpaper For details operation please refer to SYSTEM MENU DISPLAY MY GALLERY My Image This is stores all those images capture by user onthis unit For details operation please refer to SYSTEM MENU DISPLAY MY IMAGE This units allows user during video or images playback user can capture images and store them up to 10 images to set as wallpaper User also can capture an image from an Auxiliary video device if connected How To Capturing Images 1 Start playing the disc USB stick SD card or auxiliary video device 2 Hold press O capture buttons for more than 3 seconds when the desired scene or image appear on the TFT screen 3 The confirmation display appears as confirmed the image is stored in to MY IMAGE Those capture images will store in the SYSTEM MENU DISPLAY MY IMAGE For details please refer to SYSTEM MENU DISPLAY MY IMAGE How To Setting The Captured Images As Wallpaper The captured images can be set as wallpaper on the playback mode For details setting of wallpaper please refer to SYSTEM MENU MY IMAGE Do not t
22. er If not used POWER x T AMPLIFIER Tape bare end of wire TI T TI REMOTE z 3 Q ORANGE oc gt OVERRIDE Reverse gear signal WIRE Connect to Back Lamp Lead Gearbox Switch ISO i jl CONNECTOR E See Figure 2 Le I7 s JLo J 16 Pin View Figure 1 20 PIN AUDIO POWER HARNESS 20 PIN HARNESS PIN CHART ORANGE REVERSE OVERRIDE WIRE GREEN J LEFTREARSPEAKER 7 RED IGNITION ACC RED RIGHT REAR PRE AMPLIFIER LINE OUT 14 BLUE POWER ANTENNA 16 BLACK CHASSIS GROUND 18 RED RIGHT FRONT PRE AMPLIFIER LINE OUT 19 BLACK FRONT PRE AMPLIFIER LINE OUT COMMON 20 WHITE LEFT REAR PRE AMPLIFIER LINE OUT 8 HOLO3NNOO V HOLO3NNOO Figure 2 ISO CONNECTOR 4 PIN 8 PIN FEMALE WITH MALE TERMINAL ISO CONNECTOR WIRING CHART PIN WIRECOLOR_ FUNCTION LABEL A4 YELLOW BATTERY A5 BLUE POWER ANTENNA _ _ A7 RED O IGNTION ACC _ O A8 BLACK oo GROUND Bi VIOLET RIGHT REAR SPEAKER B2 VIOLET BLACK RIGHT REAR SPEAKER Bs GREY RIGHT FRONT SPEAKER B4 GREY BLACK_ RIGHT FRONT SPEAKER Bs WHITE LEFTFRONTSPEAKER Be WHITE BLACK _LEFT FRONT SPEAKER B7 GREEN LEFTREARSPEAKER H Panel Control Operation This unit is equipped with the most advanced full logic motorized slide down system You can enjoy this advance technology wi
23. ervice dealer Disc Error Maybe disc dirty disc scratched Replace the disc disc upside down E 33
24. ging Tone will be same as the original Ring tone of the Mobile Phone But some Mobile Phones like Sony Ericsson do not support this feature The Ring tone will be using the standard Ring tone of the Head unit 13 When in telephone mode during talking it is highly recommended to set the volume to below 35 in order to achieve the best sound quality As ifthe volume is too high it may create unwanted echo inside the car and this unwanted echo may feedback into the microphone If the Bluetooth related operation is not performing normally like cannot make pairing cannot making an outgoing call User can try to make a SOFT RESET of the Bluetooth module by removing detaching the panel from the main unit and waiting for about 1 min Then re attach the panel to the unit amp retry the Bluetooth operation again Or user can RESET the whole unit by pressing the RESET button behind the panel NOTE By pressing the RESET button all the stored memory will resume to factory default Bluetooth Operations Pairing Connecting And Deleting With A Bluetooth Device When connecting Bluetooth devices at the first time with this unit a mutual registration is required this is called Pairing This registration Pairing is required only at the first time as this unit and the other devices will recognize each other automatically from the next time After the devices are registered Paired with this unit User can s
25. h Function Supported By This Unit 1 Bluetooth Handsfree with Mobile Phone featuring HSP amp HFP profile 2 Listen music via Bluetooth wireless technology with Audio device or Mobile Phonefeaturing A2DP amp AVRCP profile Name of Buttons and Their Functions Unit picture Bluetooth Handfree Function Enter phone number input mode Under phone number input mode use as numeric input Under an incoming call use as reject call Under phone number input mode use as edit number Under phone number input mode short press this button use as confirm dialing the input number Under talking mode long press this button use as transfer phone conversation backward to mobile phone Under phone number input mode use as move cursor and edit number Bluetooth Operations User Guide For Bluetooth 11 1 N Co C1 Oo NI o When user use our Bluetooth HEAD UNIT please make sure the mobile phone you use must does support Bluetooth functions Headset or Handsfree profiles or both Before you start to use our Bluetooth HEAD UNIT please make sure complete pairing with your mobile phone first Please refer to the user manual section PAIRING for detail PAIRING instruction To ensure the best reception for Pairing or Re connection please make sure the Phone Battery is fully charged when making the Pairing or Re connection Please always try pairing the Mobile Phone with Head
26. he current mode will be muted and the ringing tone will be heard If an incoming call do not want to be answered user can use the to adjustthe ring tone level 4 If there is an incoming call during the standby mode Ignition on amp Power Off this unit will automatically switch on 5 While there is an Incoming call or during talking mode only the Q e buttons are functional all the other button function keys are disable hm Ending A Call To end a call press the CLEAR o button and the unit will automatically switch back to the previous mode and release the Mute at the same time m Rejecting An Incoming Call User can press the CLEAR button to reject an incoming call I Making An Outing Call User can dial the phone number either on the Mobile Phone or simply directly entering phone numbers on the front panel of this unit 1 Press the e button to start making an outgoing call and the below Phone Keypad will be shown on the TFT 2 Usethe to navigate thru the numeric 0 9 amp 3 Press the e button to confirm the input ofthe selected number 4 Use the o input number button to clear the wrong 5 Once the phone number has been entered completely Press button to start dialing the call and the below display will show on the TFT Calling 94647904 T During the Calling mode if need to input any number for example the Pin Code Input or Service Number Dial In
27. ht or from hot air from heater or where it would be subject to dust dirt or excessive vibration 7 Be sure to remove the front panel before installing the unit Fitting the outer sleeve Remove the transit screws dl from the top of the car radio Remove the outer sleeve X Q and place into the p Uy uum DE Make sure that it is not angled more than 30 DON T FORGET Bend the metal tabs on the outer sleeve outwards and downwards to stop the sleeve from moving Fitting the support strap Connect the fixing screw to the rear of the car radio Screw and Washer Bend the support strap to suit the dashboard aperture and fix to the underside of the dash board using the screw Fixing Screw Spring Washer and 5mm Nut lt Slide the car radio into the outer sleeve and connect the spring washer and nut to the fixingscrew and washer Insert fingers into the groove in the front of frame and pull out to remove the frame Insert the levers supplied with the unit into the grooves at both sides of the unit as shown in figure until they click Pulling the levers makes it possible to remove the unit from the dashboard Installation using the screw holes on the sides of the unit Fastening the unit to the factory radio mounting bracket NOTE The mounting box outer trim ring and half sleeve are not used for this method installation Removing the detachable front p
28. ing When Dual Zone is On 1 When DUAL ZONE is turned on the audio output will be muted for about 1 second 2 The default source mode for Front ZONE is Tuner amp for Rear ZONE is DVD 3 The default Volume level is 12 for both Front amp Rear ZONE audio output or the Volume Level set as VOL PGM Level set in the Menu 4 The TFT screen is defaulted to display the Front Mode 5 When Dual Zone is On some of the AUDIO FUNCTION WILL NOT BE FUNCTIONAL THESE FUNCTION ARE Bass Treble Middle Balance Fader Sub woofer iX bass To Switch Off Dual Zone Mode Long press button to access into Dual Zone and by rotate select Offmode TIPS Long press System Menu and access into Dual Zone mode is same can be operation the Off mode The Default Setting When Dual Zone Is In off Mode The default audio output reverts to what the user selected for the FRONT Zone source when DUAL ZONE IS OFF For example When the DUAL Zone is ON user has selected DVD for Front ZONE amp Tuner for Rear ZONE Once DUAL ZONE is turned OFF Audio Output for all 4 speakers becomes DVD mode E 18 AV in Mode Your can connect up to 2 optional devices press the button to enter into the AV mode AV in 1 Front panel AV in AV in 2 RCA back of unit AVin 1 This unit is allowed to connect with external Audio Video system such like Digital Camera or Game C
29. lide down mechanism and this will void the warranty e Please do not try to detach remove the front panel by pressing the detach button or attach the front panel when the panel is in the slide down position This may cause serious amp permanent damage to the unit amp panel Only attach or detach the front panel when the panel is in the slide up position Name Of Buttons and Theirs Functions USB A V IN JACK DOOR T N u O G QU e No Item Decriptions MUTE Press this button to turn the mute On Off e POWEROFF Long press this button to turn Off the unit i PLAY PAUSE Press this button to Pause resume Play the music under Media player mode INFO Long press this button to access the information functions LLL See Rm anm POWER ON Press this center button to turn On the unit e SYSTEM MENU Long press this button to access into the Menu mode DIAL Under the Bluetooth Handfree mode long press this button to enter into the phone number keypad amp dialling mode i PANEL RELEASE Press this button to remove the control panel ESC Press this button to quick return previous menu or mode o i BAND Under tuner mode press this button to access the Band function i CLEAR Under the Bluetooth Handfree mode press this button to clear the input phone number or reject an incoming call PRESET LIST Under tuner mode press this button to list up stored station MUSIC FI
30. nction mode 2 ZONE Long press this button to access the Dual zone operations USB SLOT This unit can support playback MP3 WMA JPEG MPEG4 DIVX m i The USB slot behind the format which are stored on the USB memory stick i USB AV IN jack door AV IN JACK This unit is allowed to connect with external Audio Video system BD The AVIN slot behind such like Digital Camera or Game Console User can connect the the USB AVIN jack door external A V system thru the A V in jack on front panel Name Of Buttons and Theirs Functions No Button Item Decriptions rover OX Press this button to turn the mute On Off When the unit is power on long press this button to turn Off the unit Once the unit power off press this button to turn On the unit U 96 ms mM JJ O Z lt EJECT Press the EJECT button to eject the disc or loading the disc Long press the MENU button to enter into the main menu mode Press the MENU button to enter into the Bluetooth dial opertions SOURCE Press this button to enter into the SOURCE mode Long press this button to enter into the Bluetooth transfer mode r 2 ZONE Once the Daual zone turn on press this button to change Front MODE zone or Rear zone VOLUME Press this button to increase the volume VOLUME Press this button to decrease the volume 2 ZONE Press this button to access the Dual zone operations 9 eco o e U
31. nder the tuner mode press this button to access the Manual Seek mode Under the media player mode press this button fast forward through the music under media player mode 9 wv E 9 Name Of Buttons and Theirs Functions Under the tuner mode press this button to access the Manual Seek mode lt lt Under the media player mode press this button fast backward through the music under media player mode gt UP DOWN LEFT RIGHT Use these buttons to move cursor up down left right 9 Under the tuner mode press this button access Auto Seek mode Kd Under the media player mode press this button to skip backward ofthe previous chapter 9 Under the tuner mode press this button access Auto Seek mode DI Under the media player mode press this button to skip forward i of the next chapter 9 i ENTER Use this button to confirm the selection Press this button to Pause resume Play the music under media D PLAY PAUSE bis vor mode Press this button to return previous menu Under the tuner mode press this button to access the BAND mode BAND NUMERIC When playback the media use for track or file number direct BUTTONS access and use when function need numeric selection or input e eoceo o 9 Press this button briefly will be enter the screen protect for about 2 seconds then display the clock mode During video image playback press this button
32. nly Under the Video Setting mode user can rotate to adjust the color level from 01 to 10 Under the DVD Setup mode there are have below options for selection Aspect Ratio Selecting the TV Aspect setting allows the user to select the aspect ratio of the TV DVD and VCD only The following options are available 4 3 Aspect ratio of TV is 4 3 16 9 Aspect ratio of TV is 16 9 Both wide screen and 4 3 contents will fill the entire screen TV Signal The Video setting allows the user to select the TV standard DVD and VCD only The following options are available NTSC TV is NTSC PAL content is played at NTSC resolution and frame rate factory default PAL TV is PAL NTSC content is playedatPAL resolution and rame rate AUTO If the content is PAL the outputis PAL Ifthe content is NTSC the outputis NTSC Setting the Default on will reset all options of Media function setting to factory defaults setting Dual Zone Operation This unit is equipped with the most advance Dual Zone feature This function is useful if the user would like to select different modes of the Audio and Video output source for Front and Rear Speakers and TFT Screens For example user can select to listen to Tuner music for front speakers and rear speaker for DVD movie To Switch On Dual Zone Mode 1 Off is the default setting 2 Long press the Q button on the control panel or remote c
33. nswer any This option is allows user change the background screen from wallpaper to factory default screen Image incoming call without the need of pressing the PHONE button Phone This unit can preset the ringing Vol volume level for any incoming call User can rotate the encoder knob to adjust from Min 00 to Max 46 E Under the Bluetooth setting menu there are have below options for selection This feature is used for the pairing of this unit s Bluetooth system to mobile phone or other Bluetooth device Under the Pairing mode press the button to activate the Pairing Tips Please refer to Pairing Connecting And Deleting With A Bluetooth Device for the details operation of Pairing Tuner Operation m S SOURCE BUTTON Press button to select Tuner playback mode then press e button as confirm the selection gt B BAND BUTTON Press the o button to change between FM bands and or AM MW m F FUNCTION BUTTON Press the button under Tuner mode the following function are allow to operation Use this function to saved the current frequency to memory station After Auto Store saved full 6 stations will automatically enter present scan one time oi To change AF in On or Off mode To change TA in On or Off mode A On Off PTY Seek You can get into the PTY list to select the desired PTY mode L LIST BUTTON You can get into the Store List to select the
34. oing call it s not possible to make the CALL TRANSFER if the call is not being answered yet It s only possible to Transfer the call to Mobile phone after the call is being answered Depending on different type of Mobile Phone the time need for activating the CALL TRANSFER mode is different Like Nokia Mobile Phone usually takes 3 5 seconds after pressed the TRANSFER button for phone call transfer back or forth through Unit to mobile phone m Auto Answer Mode User can set this unit to automatically answer all the incoming calls once this function is set to on user do not need to press the e button to answer accept any incoming call Please refer to the SYSTEM MENU Operation for more details of how to access into and operates the SYSTEM MENU of BLUETOOTH Auto Answer I To Set The Incoming Ring Tone Level This unit allows the user to preset the most suitable incoming call ringing volume level from the car speakers The factory default is set at 20 User can adjust the volume level in the SYSTEM MENU of BLUETOOTH Phone Vol Please refer to SYSTEM MENU Operation for more details of how to access into and operates the SYSTEM MENU of BLUETOOTH Phone Vol Bluetooth Operations Bluetooth Audio Operation IMPORTANT To listen Bluetooth audio streaming from Bluetooth Audio Streaming A2DP the audio device user MUST change the Advanced Audio Distribution mode to BT AUDIO first Any other
35. onsole User can connect the external A V system thru the A V in jack on front panel The below No Video Signal will be show on the TFT as remind if there is no any external AV System input ADOU e Parking Wire In order to avoid any accident the driver must not watch video while driving This unit is designed to not allow watching moving video while driving Park your car in a safe place and engage the parking brake before watching moving video The Video Blocking system under Parking Brake NOT ENGAGED only control this units display This system will not affect the Video Output thru the rear RCA Video Output Tips Be sure to connect Parking Brake connection lead please see more details on Wiring Diagram If watch moving video from Disc or AV In source but Parking Brake is NOT PROPERLY CONNECTED the video signal will be blocked by the system and the below display will be show on TFT Engage Parking Brake to enjoy Video 5 If user connected a back up camera system to this unit the vehicle is in reverse Gear Back Up mode the front in dash TFT display will automatically switch to Back Up Camera Video signal regardless whatever mode is currently displayed on the front in dash TFT Tips Be sure to connect Reverse wire properly please see more details on Wiring Diagram Wallpaper Setting we YU lt Jat VII QOUIIU a CC This unit allows user change the background scre
36. ontrol to access into Dual Zone Control mode and use select 2 Zone to On The Available Playback Mode 1 Front Zone Tuner and BT Audio modes are available select for playback on Front Zone 2 Rear Zone Tuner Media DVD USB SD AV modes are available select for playback Rear Zone NOTE AV 1 amp AV 2 are considered as the same mode source in the DUAL ZONE function So if either the Front or Rear Source is set to AV 1 or AV 2 mode The other ZONE is not allowed to select the AV 2 or AV 1 Mode eg If F Zone is selected AV 1 then R Zone is not allow to have AV 2 To Select Front Rear Sources Once On is selected use to access to Front or Rear mode by rotate to select the mode want to playback To Operates Function of Front Rear Soures 1 The Front Panel amp Remote control is defaulted to control the FRONT source s function operation 2 When DUAL ZONE is turned On the O button is used to change Front source amp Rear source Press the button repeatedly to change between Front and Rear 3 The TFT screen will display the Rear Source mode for 10 seconds User has 10 seconds to make the desired operation on the Rear Source s function on the Front Panel or Remote Control 4 The TFT screen will automatically switch back to the Front Source after 10 seconds And the Front Panel and Remote now is resumed to operate for Front Source s function again The Default Sett
37. put user can Short press the button to enter into the numeric input interface and then rotate to navigate thru the desires input number and press the A button again to confirm the input of the selected number While there is an outgoing call or during talking mode only O00 O all the othe buttons are functional function keys are disabled User can use the t0 adjust the talking volume level To end the conversation press button The unit will switch back to the previous mode automatically The mute of the previous mode will be released at the same time During the talking mode if the Ignition is being turned off the unit will keep the conversation even if the Ignition is Switched off After the conversation is finished user can press button to switch off the unit Bluetooth Operations I Making An Redial Call Press the button to access the dial interface and then press Ov Redial the last number dialed out on the unit I To Activate The Privacy Talking Mode Incoming Call Transfer Mode During the talking mode user can LONG press the button to transfer the phone call from the unit back to the mobile phone for privacy reason The below display will show on the TFT for 3 seconds after the transfer mode is being activated Transfer 94647904 After the Transfer button is pressed the mute of the present mode will be released at the same time When making an outg
38. rly connected to the car accessory terminal switch the ignition key to ACC The fuse is blown Replace the fuse Disc cannot be Presence of CD disc inside Remove the disc in the player then loaded or ejected the player put a new one Inserting the disc in reverse Insert the compact disc with the direction label facing upward Compact disc is extremely Clean the disc or try to play a new one dirty or defective disc Temperature inside the car is Cool off or until the ambient temperature too high returns to normal Condensation Leave the player to off for an hour or so then try again No sound Volume is in minimum Adjust volume to a desired level Wiring is not properly Check wiring connection connected The operation keys The built in microcomputer is Press the RESET button do not work not operating properly due to Front panel is not properly fixed into noise its place The installation angle is Adjust the installation angle to less Sound skips P more than 30 degrees than 30 degrees The disc is extremely dirtor Clean the compact disc Then try to play a defective disc new one The radio does not The antenna cable is not Insert the antenna cable firmly work connected The radio station automatic selection The signals are too weak Select a station manually does not work ERROR Mechanism Error Press the eject button to correct the problem If the error code does not disappear consult your nearest s
39. s for selection frequency as 60Hz 80Hz 100Hz or 200Hz 3 Bass q adjust the Bass Quality Factor as 2N 1N 1W or 2W System Setting Audio Setting _ Treble 1 Level adjust the Treble level from Preset EQ Setting Tuner Setting 06 to 06 o Display Setting Info Setting 2 C Freq adjust the Treble center frequency C FREQ as 10KHz 12 5KHz 15KHz or 17 5KHz ss 1 Level adjust the Middle level from 06 to 06 i 2 C Freq adjust the Middle Range Image Setting Bluetooth Setting center frequency as 500Hz 1KHz 1 5KHz or2 5KHz 3 Mid q adjust the desired Middle Quality Factor to 2N 1N 1W or 2W Under the System Setting menu there arehave Balance To adjust the Balance between the below options for selection right and left speakers from R12 to Date Set To adjust the Date Month Year L12 Balance Center for this unit is Balance COO Clock Set To adjust the hour and minute Time To change the time format Format between 12H and 24H e F12 Fader Center for this unit is Date Set To adjust the Date Month Year Fader C00 Clock Set To adjust the hour and minute 1 If Front Zone F Zone is selected rotate the encoder knob to navigate through different modes Tunner OSS Audio Setting gt BT are available for selection of LI System Setting To adjust the Fader between the front and rear speakers from R12 to the Front Zone or AV output Under the Audio Setting
40. stal Display active matrix Resolution 320 x 240 DVD CD Section Compatible Disc Format Signal to Noise Ratio Dynamic Range Frequency Response Channel Separation Video Section Color System Video Output Video Input Audio Section Max Output Power Load Impedance speakers Digital Output Line out level load Line out Impedance Auxiliary Input Section Frequency response Input Maximum Voltage Input Impedance Radio Section FM Frequency Range Usable Sensitivity Stereo Separation S N Ratio AM or MW Frequency Range Usable Sensitivity S N Ratio General Operating Voltage Grounding System Fuse Operating Temperature Unit Mounting Angle See Disc Note for more details description gt 90 dB gt 90 dB 20Hz to 20Khz 3dB 2 Channel Stereo gt 60dB 1khz NTSC PAL Composite 1 0 Vp p 0 2 75 ohm Composite 1 0 Vp p 0 2 75 ohm 75W x4 channels 4 ohms 900mV 400mV 10k ohm load 200 ohm 20Hz to 20KHz 3dB 1200 mV 4 7k ohm 87 5 108 0 MHz 50 kHz Space lt 15dB at S N 30 dB 25 dB at 1KHz 50 dB 522 1620 Khz 9 kHz Space lt 40dB at S N 20dB 40 dB DC 11 14 4V Negative Ground 15 Amp Mini ATM Type 0 Cto50 C lt 30 Troubleshooting Before going through the check list check wiring connection If any of the problems persist after check list has been made consult your nearest service dealer The car ignition is not on If the power supply is prope
41. sword input and the Pairing process should start 8 BT70 should appear on the pairing device user should select amp accept pair with BT70 and then input the same password which was input on this unit previously on above step 6 Please refer to the instruction manual of the Bluetooth device on how to enter into the Bluetooth set up and Bluetooth pairing 9 Ifthe pairing is successful the below display will be show on TFT llakia 62301 If the pairing failed the below display will be show on TFT for3 seconds and the unit will automatically switch back to the previous mode During the Pairing only the Clear Volume amp Mute buttons are functional all the other function keys are disabled amp non operational during the pairing mode Bluetooth Operations m Searching This Unit for Pairing 1 from a other Bluetooth Device Set the other Bluetooth device which need to be paired with this unit into Searching mode To allow this unit searching by the other device the VISIBILITY in the SYSTEM MENU of BLUETOOTH must be set to SHOW Please refer to SYSTEM MENU of BLUETOOTH for more details of how to set the VISIBILTY mode Please refer the instruction manual of your BLUETOOTH device on how to enter into the BLUETOOTH device searching mode 2 When searching is completed BT70 should appear in the Bluetooth device select
42. t start reading the Memory Card successfully the first file on the Memory Card will automatically start playback NOTE If no any Memory Card is inserted into the main unit card slot Press button will automatically skip card mode E 16 DVD Operations Once a DVD disc is inserted into the unit the unit will automatically start the playback from the beginning ofthe disc m pir PLAY PAUSE BUTTON 1 Press this button to pause playback 2 Press this button again to resume normal playback 3 Long press this button is forward to the next picture in the video DVD and VCD only gt gt lt lt TRACK SELECT 1 Press these buttons to skip forward to the beginning of the next or previous chapter 2 Long press these buttons to fast forward or fast rewind through the disc Press these buttons again to resume normal playback gt L LIST BUTTON Press the button to view the main item and select the desired to playback m INFO BUTTON Under DVD mode press INFO button to view the station information m F FUNCTION BUTTON Under the Function menu there are have below options for selection Repeat 1 Repeat CH to repeat playback the current the chapter 2 Repeat Title to repeat playback the current title 3 Repeat Off to cancel all the Repeat function Disc Audio Video Setting DVD Setup During playback to change the audio language DVD Divx o
43. t means this device is connecting with this unit now button for more than 3 seconds to confirm to disconnect this device If the disconnection is successful the below display will be show onthe TFT NoRia 62301 I Deleting User can delete a paired device if it is no longer needed as follows 1 Use Pressing Pressing the Access into the SYSTEM MENU of BLUETOOTH _ Handsfree or Audio Device to select between Handsfree and Audio Device If the deleting device is a Handsfree Mobile Phone device once the Handsfree appears on the display then press the e button the list of paired devices appears button to access into the delete mode user can rotate knob to select the below two Delete modes a Delete the selected paired device b Delete all the paired devices in the list button to confirm the selection to delete If the delete is successful the below display will show on TFT Bluetooth Operations Handsfree Phoning m Answering An Incoming Call User can press the e button to answer acceptthe incoming call 1 When there is an incoming call the ring tone is output from the car speaker and the caller number will be shown on the display If the incoming call has no caller number the display will shown UNKNOWN 2 Always press the e button to answer accept the call after display showing the Caller Number or UNKNOWN 3 The audio output of t
44. th just a single press of the button Please read carefully the following operation instruction before operating the unit Open Close The Panel Press the eC button to slide down EJECT TILT closed panel or to slide up close an opened panel Loading a CD Panel in the slide down position the disc slot become accessible Insert a CD through the disc slot the CD will be automatically loaded and the panel will also close automatically amp playback will begin If no CD is inserted press Open button again to slide up the panel Ejecting a CD Press Open button to slide down the panel ifa CD is loaded it will be ejected automatically No further key press is needed If the ejected CD is not being removed after 10 seconds it will be reloaded automatically And the panel will automatically slide up after disc has been reloaded If the ejected disc remains in the slot the eC button will not function so closing the panel by using button is prevented unless the disc is removed or reloaded End user can adjust the panel viewing angle of the display to obtain the optimum viewing angle inside the vehicle Long press the eC button to enter into the Angle options then rotate the Volume Konb to adjust the level 0 to 8 e Please always use the button to slide up down the front panel Please never try to slide up or down the front panel manually this will cause serious amp permanent damage to the s
45. unit after a few minutes of the Mobile Phone was Switched On to ensure the best pairing result BT70 is this unit device model number which is displayed onthe mobile phone To achieve the best performance please always keep the Mobile Phone within 3 meters ofthe Head unit Please always keep a clear path between the Mobile Phone amp the Head unit Never put any metal object or any obstacle between the path of the Mobile Phone amp the Head unit Some brand of Mobile Phone like Sony Ericsson may have Power Saving Mode selection when Bluetooth mode is switch on PLEASE DO NOT Switches ON Power saving Mode when operating with this Head Unit as some abnormal communal behavior will happen occasionally if Power Saving Mode is switched on Before user make Outgoing call or Incoming call make sure the mobile phone s Bluetooth function is switched ON 10 To ensure the best conversation quality performance please always keep talking within 1 meter of the Head Unit If user want to Dis connect the Head unit with the Mobile Phone please switch OFF Bluetooth connectivity on the Mobile Phone or go to the system menu dis connect to disconnect the Bluetooth connectivity manually please refer to the user manual section dis connection of the Bluetooth system for details instruction Some Mobile Phones can support IN BAND RING TONE such as Nokia In such case the Incoming Rin
46. urn off the unit while storing the image Stored image may differ from the original aspect ratio due to compression or elongation Highlight Features viotion Pictures Display Mode The units have 3 difference types of motion pictures can display on TFT under playback Mode Press the button repeatedly can switch between the 3 difference modes e The 1 pressis Virtual Aqua display mode e The 2 press is EQ dancing meter display mode e The3 pressis DEMO mode DEMO display mode is self demonstration the major highlight function which Available on this unit The last press is back to the current playback display mode When pressing button switching thru each three difference Motion Pictures mode The TFT screen will have around 1 2 seconds BLANK screen dark screen This is normal because during these 1 2 seconds BLANK screen is for waiting to re loading the next motion pictures Clock amp Date Display Mode User can choose display the Clock Date on the screen Long press the button for more than 3 seconds to change the Clock Date display mode Under Clock date display mode long press button again to change back display the playback mode Backlight Dimmer Contro User can adjust the TFT backlight on the screen Long press button for more than 3 seconds enter into the Display mode to adjust the Dimmer level between High Mid Low standby Display Mode Un
Download Pdf Manuals
Related Search