CYBER-Relax S.O Massage Chair
Contents
1. WAVELET RUBBING DEEP KNEAD UP DEEP KNEAD DOWN STRETCH SHOULDER KNEAD UP STRETCH TAPPING and STRETCH WAVELET only FOOT STRETCH STRENGTH WIDTH adjust button Width between knead balls can be adjusted at 3 levels This adjustment is limited to the TAPPING STRETCH STRETCH TAPPING 3D TAPPING SHIATSU and ROLLING only ARM button Allows turning ON OFF the air massaging of arms PULSE button Allows selecting the PULSE mode of AIR This mode cannot be used simultaneously with the FOOT STRETCH COMBO FOOT REST button Allows massaging legs simultaneously with other points 11 ROLLING SPEED adjust button Massaging speed can be adjusted at 3 levels This adjustment is limited to the KNEAD UP KNEAD DOWN TAPPING STRETCH button Allows selecting the stretch or a massaging function that combines the KNEAD UP TAPPING or WAVELET with the stretch movement 3D button Allows selecting a massaging function that combines the KNEAD UP KNEAD DOWN TAPPING or WAVELET with the strong or gentle WHOLE PART button Allows setting the massaging area while moving up or down along the back of body When the WHOLE is selected but the shoulder position is not set the SHOULDER ADJUSTMENT is performed STRENGTH adjust button Allows adjusting the mass2. BACK AIR gt UP gt gt le KNEAD UP 7 WAVELET EAD POINT 10 WAVELET NT 6 KNEAD n KNEAD DOWN H 12 ROLLING 5 SHIATSU 4 KNEAD UP 11 WAVELET gt 13 WAVELET 14 KNEAD 6 3D TAPPING 21 KNEAD UP z 20 WAVELET 22 WAVELET e t 23 DOWN 119 EAD i 17 WAVELET H BEEP i KNEAD UP Re P b gt p 28 KNEAD UP NE 29 WAVELET E Y 1 i REGULARIZING 26 WAVELET Massaging of lower Ai i body with air is applied 25 STRETCH in the order of legs Woj i 74 KNEAD UP EB thighs and bottom Ht KNEAD UP 24 Movements during the AUTO COURSE WH OLE BO DY AI R Neck shoulders contour of back and waist are massaged uniformly lt Approx 15 minutes gt To be continued gt b on massage of A D shown at left is applied A LEGS D LEGS amp THIGHS WAIST BOTTOM WAIST amp BACK gt NECK SHOULDER MECHA amp AIR EQ BOR 15 Ie 3 DEEP 8 KNEAD 2 DEEP KNEAD UP 9 KNEAD BOTTOM AIR BOTTOM AIR BOTTOM AIR DOWN 4 KNEAD 1 SION Am mi KNEAD BOTTOM AIR DOWN WAIST AIR 5 TAPPING BOTTOM AIR WAIST AIR 6 WAVELET BOTTOM AIR ies li i 14 DEEP 15 TAPPING KNEAD BOTTOM DOWN 20 ROLLING ADOM WAIST AIR 16 KNEAD UP 19 ENEAD 13 WAVELET BOTTOM WAIST AIR BOTTOM AIR ndn 18 3D KNEAD WAIST AIR i GR
3. COMBO FOOTREST accessories from your arms AIR STRENGTH button AIR STRENGTH button allows selecting the air AIR GENTLE intensity Selected intensity AIR GENTLE or STRONG is ae DOW indicated with high light Default setting is the AIR GENTLE Each push on the AIR STRENGTH button switches the display and the FUNCTION STRETCH SPEED WIDTH WHOLEJPART selected movement will start 2 seconds after the selection Selected STRENGTH is displayed on the LCD 33 Movement adjustment of selective functions VIBRATION button Each push on the VIBRATION button selects ON or OFF When the VIBRATION is selected the indicator illuminates RECLINER FOOT STRETCH button If you press the FOOT STRETCH button the FOOT STRETCH function is selected Each push on the FOOT STRETCH button it is Set or Cancelled FOOT STRETCH can be set when the AIR PART is selected With the FOOT STRETCH whole legs are massaged as the foot rest goes down while the foot rest is pressurized with air Foot rest angle may change gradually after repeated movements If you do not like it it is adjustable with the UP and DOWN buttons of FOOT REST PULSE button Press the PULSE button to set the PULSE function Each pus
4. LE f de 7 ROLLING 8 9 KNEAD DOWN X i KNEAD UP 10 TAPPING P Be pre we 15 WAVELET ROLLING WAIST AIR Concentrated massaging of waist lt Approx 15 minutes gt 12 14 STRETCH 17 ee M To be continued TR j Combined massaging of i B D and F shown at left Y is applied WAIST WAIST 5 LEGS THIGHS D LEGS amp WAIST i B LEGS THIGHS BOTTOM amp WAIST I WAIST U i 17 UI 7 MIN M ECHA 8 AIR Short massaging of entire body lt Approx 7 minutes gt e 1 E KNEAD 7 KNEAD UP 8 WAVELET 2 a DOWN BOTTOM BOTTOM WAIST ALK ele DELE KNEAD UP BOTTO M WAIST AIR ji hi 5 DEEP t Il KNEAD UP Hi I MS AIR n 4 gt 4 Oe 13 TAPPING 9 WAVELET BOTTOM BACK AIR AIR N 12 KNEAD DOWN f BOTTOM I AIR i 11 STRETCH i li TAPPING 15 YAIST AIR d i OTTOM H i i BACK AIR i 10 KNEAD UP oo AIST AIR PN KNEAD UP WAIST AIR Massaging of lower body with air is applied in the order of legs thighs and bottom Use of selective functions operate the following with the remote controller lid opened START SWITCH DENEN amp AIR ADJUST SHOULDER COURSE WAVELET SHIATSU RUBBING ROLLING ss 4 FUNCTION STRET
5. Never attempt to disassemble repair or modify the product It could cause injury by ignition or abnormal movement You may hear the following noises or detect some feeling as described below during operation However these are not errors but inherent to the product so that the service life or others will not be affected e Clatters produced by the knead balls moving up or down e Noise of gears or motor during massaging movement e Sound of rustling between the knead balls and the cloth particularly during KNEAD movement e Rattling noise during the TAPPING or WAVELET movement particularly during movement from the shoulder to the back e Speed of massaging movement may vary during KNEAD TAPPING or WAVELET depending on the force of reaction against kneads balls e Difference of noise after changing the SPEED setting e Beat from motor at application of load e Noise released when the knead balls are moved fore and after automatically to adjust to the person during the AUTO COURSE Clicks e Breathing noise of exhaust during pneumatic movement e Sound produced from inflating air bags on the back of arm rest is turned Phenomenon Inspection Point Remedy Reference Page Is the power cord plug inserted Insert the plug in the receptacle 9 18 28 properly securely Check if the power switch at Turn ON the power switch 9 18 28 Failure to start other obstruction Did you speci
6. STRETCH WAVELET Illuminating lamp moves from the present position to left at each push on the STRONG button while it moves to right at each push on the GENTLE button STRENGTH setting value is displayed as final 2 seconds after the setting 32 Movement adjustment of selective functions AIR PART button A push on the AIR PART button the present setting is WAIST BACK LEG THIGH BOTTO LEG WAIST BACK indicated with high light WAIST BACE WAIST BACK tases D Each push on the PART button switches LER eC the display and the selected movement will SPEED WIDTH WHOLE PART start 2 seconds after the selection STRONG C STRENGTH GENTLE BD SES SR Movement of selected function is displayed FOOT ba m A on the LCD FOOTREST STRENGTH Rys AIR ARM button A push on the AIR ARM button the present setting is ARM AIR indi i i i indicated with high light COMBO Each push on the ARM button switches LEFT RIGHT LL STOP amp the display and the selected movement will start 2 seconds after the selection Movement of selected function is displayed on the LCD A CAUTION When using the ARM function confirm that you have removed a wrist watch or other FUNCTION STRETCH WIDTH SPEED WHOLE PART STRONG lt lt S RENG R gt GENTLE STRENGTH
7. 20 21 22 23 24 25 26 27 28 29 30 Do not attempt to stand on the arm rest foot rest or back rest Otherwise the massager may fall down resulting in injury Do not use the massager on the head arm knee or abdomen As well as do not put your hand or leg between knead ball Otherwise the user may feel sick or an injury may occur Do not attempt to plug unplug the power plug with wet hands Otherwise it may result in injury or electric shock When the cover cloth is broken when the built in mechanism is exposed do not use such massager but send it for repair Otherwise it may result in a cause of accident or injury Never attempt to disassemble the massager Do not allow any personnel other than repair engineer to disassemble or repair the massager Otherwise it may result in a cause of fire electric shock or injury The following persons are requested to consult a doctor prior to use Otherwise the user may feel sick or an injury may occur Those who are under the medical treatment or particularly those who complain of indisposition Those who have malign tumors Those who suffer from heart trouble Those who are in menstrual period or pregnant Those who require complete rest Those whose backbone is abnormal or bent Those who desire to use the massager on a part of the body that is diseased or receiving medical treatment Those who are feverish 38 C or over e Those who have we
8. Relief of muscular stiffness e Alleviation of neuralgia or muscular pain IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance basic precautions should always be followed including the following Read all instructions before using this appliance DAN G E R To reduce the risk of electric shock Always unplug this appliance from electrical outlet immediately after using and before cleaning Improper connection of the equipment grounding conductor can result in a risk of electric shock Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded Do not modify the plug provided with the product if it will not fit outlet have a proper outlet installed by a qualified electrician WA R N NG To reduce the risk of burns fire electric shock or injury to persons 1 10 11 12 An appliance should never be left unattended plugged in Unplug from outlet when not in use and before off parts Do not operated under blanket or pillow Excessive heating can occur and cause fire electric shock or injury to persons Close supervision is necessary when this appliance is used by on or near children invalids or disabled persons Use this appliance only for its intended use as described in this manual Do not use attachments not recommended by the manufacturer Never operate this appliance if it has a damaged cord or plug if it is not working properly if
9. back and the waist Arm Back pad Air massage is Relax and lay the applied to the arm back on Arm rest Space for the remote controller Inside Store the remote controller here after use Foot rest Air massage is applied to the legs Seat pad 7 tt Power switch Turn the switch to OFF after use Power supply fuse c W SIE Service receptacle 50 W max Power consumption exceeding 50 W could cause trouble Power cord EE Castor Power cord plug Grounding terminal Name and functions of components Remote controller START RESET button Starts and stops the massaging and stores the knead balls LCD display Displays detail of setting or cautions Page 12 STOP button Stops the massaging movement It stops the selected course ADJUST SHOULDER button This button allows adjusting finely the shoulder position during the AUTO during the AUTO COURSE COURSE and the shoulder position MORES setting for selected function It allows also moving the knead balls AUTO COURSE button when selecting a function Shoulder position can be adjusted finely even on the way of the AUTO COURSE PAUSE button Push on the button stops the AUTO COURSE temporarily and another push restarts the movement If the temporary stop condition continues for more than 10 minutes the temporary stop co
10. consult your dealer or us Maintenance Chair Cover cloth back pad pillow and seat pad Vinyl chloride leather Request To clean the leather wipe with rags impregnated with neutral detergent Wipe again with rags moistened with water to remove the detergent and then dry naturally Refrain from using too much detergent not to damage the leather Chair Cloth back pad pillow and seat pad Polyester 10096 Request Use neutral detergent or stain remover special to clothes to make clean the cover cloth Refrain from using too much not to damage the cloth Wipe with dry rags to clean painted areas Back pad pillow and seat pad can be dry cleaned Request Keep the equipment clean always and store it at a safe place free from excessive temperatures humidity dirt or others AA CAUTION Remove the power cord plug from the receptacle before inspection or maintenance It is very dangerous to handle the plug with wet hands It could cause electrical shock or CAUTION Do not use benzene thinner or anything containing acetate for cleaning It could cause electrical shock or ignition Seat pad is secured on the seat with magic tapes Separate the tapes to remove it Main unit Make clean plastic parts pipes and the arm rest with rags impregnated with neutral detergent and squeezed tightly Wipe next with dry rags to remove neutral detergent completely Re
11. it has been dropped or damaged or dropped into water Return the appliance to a service center for examination and repair Do not carry this appliance by supply cord or use cord as a handle Keep the cord away from heated surfaces Never operate the appliance with the air openings blocked Keep the air openings free of lint hair and the like Never drop or insert any object into any opening Do not use outdoors Do not operate where aerosol spray products are being used or where oxygen is being administered To disconnect turn all controls to the off position then remove plug from outlet IMPORTANT SAFETY INSTRUCTIONS WARNING 13 14 15 16 17 18 Grounding Instructions This product must be grounded If it should malfunction or breakdown grounding provides a path of least resistance for electric current to reduce the risk of electric shock This product is equipped with a cord having an equipment grounding conductor and a grounding plug The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances This product is for use on a nominal 120 volt circuit and has a grounding plug that look like the plug illustrated in sketch A A temporary adapter that looks like the adapter illustrated B and C may be used to connect the plug to a 2 pole receptacle as shown in sketch B if a properly grounded outlet is not available The temporar
12. repeating the supply and exhaust of air several times after supplying air at each point Air massaging with strong or gentle intensity Strength of massaging can be set at two levels of Strong or Gentle CAUTION When using the ARM function confirm that you have removed a wrist watch or other accessories from your arms Legs Double level kneading for better blood circulation Features 7 Four automatic courses can be selected depending on symptoms Whole course To relieve stiffness from the entire area of the back Shoulder course To relieve the neck and shoulder intensely Waist course To relieve the waist intensely 7 MIN course Whole course is reduced to approx 7 minutes Additional 3 modes can be selected in the Whole Shoulder and modes depending on your need There is no body shape detection during the 7 MIN course 8 Intensity is adjustable at 5 levels for the AUTO COURSE Although the intensity is adjustable during the COURSE there are some points on the waist and neck shoulder which are fixed and unable to adjust 9 Letter S curve running along the body line Name and functions of components Main unit Pillow Turn over to the back before starting the massage Seat Massages by air the bottom and thighs Back rest In addition to the entire back the air massage is applied also to the
13. the chair 50 cm or more Changing the place of installation Hold down on the top of the back rest using the castors as the fulcrum Front part of the chair will be lifted Move the chair in this position AA CAUTION e Do not attempt to move the chair while a person or object sitting on the seat There is risk of upset e Where the floor surface is not hard enough the chair should not be moved using the castors or by dragging directly on the floor Castors e Do not hold the seat or foot rest to move the chair Front part of the chair is rather heavy Take sufficient care when lifting the front part of the chair Grounding connection AA CAUTION Securely connect the grounding cable at the chair When the grounding terminal is provided at the wall receptacle e Extend the grounding cable from the grounding terminal on the chair main unit to that on the receptacle Unless the grounding cable is installed it could cause electrical shocks when the earth leakage occurs Consult your dealer to install the grounding cable Do not connect the grounding cable Grounding cable at the followings Gas pipe There is risk of explosion or When the grounding terminal is not provided ignition at the wall receptacle Telephone cable or lightning rod It is e Consult your dealer or electrical work dangerous when struck by lightning contractor for the installation of grounding W
14. the cord forcibly Otherwise the cord may break resulting fire or electric shock Do not use the massager on other than the designated voltage Otherwise it may result in a cause of fire or electric shock Do not use the massager in the bathroom or places where humidity is high Otherwise it may result in electric shock or damage When the massager becomes inoperative disconnect the power plug immediately for prevention of accident and ask the sales agent for inspection repair information Otherwise it may result in fire due to electric shock leaking current short circuit etc Switch the power OFF instantly at the time of power failure as well as pull the power plug out from the socket Otherwise it would become dangerous at the time of power comeback Be careful not to fall asleep during massage Otherwise it may result in a cause of accident or injury Do not use the massager with other medical instruments excluding foot type massager Otherwise it may result in an accident or injury Place the massager main unit at a level floor surface Otherwise if it is placed at an unstable place it may fall down probably resulting in a cause of injury The maximum permissible weight of the massager is 100 kilograms Do not use the massager with those who weigh more than 100 kilograms Otherwise an accident may happen or damage to the machine may result Features Point Navi sensor When using the AUTO COURSE only Bef
15. 0 minutes elapse consecutively after the start of massage 35 When changing the COURSE on the way Change from AUTO COURSE Select function 1 Open the lid of remote controller when the AUTO COURSE for example the WHOLE BODY COURSE MECHA 8 AIR is displayed Just opening the lid causes no change on the display and the massage movement FUNCTION STRETCH SPEED WIDTH I R STRONG STRENGTH GENTLE es 2 If you press FUNCTION WHOLE PART STRETCH or 3D of massage or PART or ARM of AIR the selected movement starts For the movement of each function refer to the description of FOOT ARM PART STRETCH eS Se cl Gee each function At this time the timer count is reset and starts the full count of 15 minutes However it will stop as the maximum 30 minutes elapse consecutively after the start of massage Change from Select function gt AUTO COURSE TZT Close the lid of remote controller in the state that the cpi anm select function for example STRETCH TAPPING is displayed Select a desired course from the AUTO COURSE buttons on the lid The AUTO COURSE will start At this time the timer count is reset and starts the full count of 15 minutes However it will stop as the maximum 30 minutes elapse consecutively after the start of massage 36 When trouble is suspected AA WARNING
16. CH 3D SPEED WIDTH WHOLE PART STRONG lt STRENGTH gt o Turn ON the power switch Power switch is found at the back of left arm rest Press the START SWITCH and MECHA amp AIR COLLABORATION are indicated alternately on the LCD display These are displayed regardless the lid is opened or not Press the START RESET button Preparing is shown first and then the Select a Course Push the FUNCTION selector button and select a desired function from the massage menu Selected function is high lighted Push again to select subsequent functions which will be high lighted at each push When you have selected the ROLLING at the first time after pressing the START SWITCH AR set the shoulder position first of all If you select p De another function after selecting the ROLLING combined movements are produced To cancel the ROLLING press the WHOLE PART button to select the POINT or press the STOP button and select another function once again 2 MEE STRENGTH 22 28 Use of selective functions operate the following with the remote controller lid opened Storing 5 After showing the selected function with high light for approx 2 seconds the timer is shown and the movement of selected function starts For the display at this time refer to Page 10 Each movement terminates approx 15 minutes later according to th
17. EW 26 KNEAD UP 21 KNEAD UP OPTOM ATR 23 KNEAD 25 DEEP KNEAD 27 DEEP K KNEAD eje 29 KNEAD UP DOWN DOWN WAIST AIR BACK AIR BOTTOM AIR BOTTOM AIR 22 KNEAD REGULARIZING DOWN 24 KNEAD UP BACK AIR WAIST 28 STRETCH TAPPING WAIST AIR qui qu Lower body is massaged with air NECK SHOULDE R Concentrated massaging of neck and shoulder lt 15 minutes gt 3 KNEAD 4 TAPPING 7 KNEAD UP KNEAD DOWN 6 KNEAD UP 5 KNEAD i gt gt be continued q 15 WAVELET Y 13 KNEAD UP STRETCH KNEAD KA WAVELET j M Massaging of lower mA with air is applied in the order of legs thighs and bottom 1 POINT NAVI 12 TAPPING BACK AIR 11 3D TAPPING BACK AIR 1 POINT NAVI x AA 9 WAVELET HH 10 WAVELET i l 12 WAVELET i H 25 Movements during the AUTO COURSE NECK SHOULDER MECHA gt gt P r1 16 gt aay 17 KNEAD f DOWN 19 WAVELET H i i b gt gt gt h A y r y f 20 TAPPING Al Vr 700 2 23 SZ fo 22 WAVELET 4 sls 2L KNEAD i REGULARIZING i lest M L i 18 3D i WAVELET Ll n NECK SHOULDER Al gt e A p au 6 4 rv To be continued G BACK G pack f e e Combined massaging of C E and G shown at left i i
18. FUJIIRYOKI CYBER Relax S O SKS 1600 Medical Equipment Approval in Japan No 27BZ0878 10BZ6001 Device Equipment 77 Vibrator Home use electric massaging equipment USER MANUAL Massage Chair Be sure to read this manual thoroughly in order to ensure proper use In particular make certain to read the section IMPORTANT SAFETY INSTRUCTIONS Keep this manual in safe place so that it can be found easily FUJI MEDICAL INSTRUMENTS MFG CO LTD Contents Important Safety Instructions eects 2 FeatuteS e eerta 6 Name and functions of components 8 Assembly Back rest sess 13 Preparation before use esses 14 Reclining and use of foot rest 12 1 11 1 15 Use of the AUTO 18 When terminating use on the 23 Movements during the AUTO COURSE 24 Use of selective functions sess 28 Movement adjustment of selective functions 30 When changing the COURSE on the way 33 When trouble is suspected 1 14 1121 11 37 Maintenance Ok e reta 38 OTS ed OO 39 Care and inspection esser 40 Specifications lette et ette 40 Effect and Efficacy Substitution of professional masseur e Recovery from fatigue e Promotion of blood circulation e Removal of muscular fatigue e
19. Indication of air massaging Indication of air massaging of of waist pis 2 Indication of air massaging Indication of air massaging of of bottom arms Indication of air massaging of thighs Backlight e Backlight glows if any switch button is pressed e Backlight extinguishes as approx 2 minutes elapse in the stored condition e It extinguishes also when no switch is pressed for approx 2 minutes after turning on the power switch 12 Assembly Back rest Assembly Folding Raise the back rest in the arrow direction and Hold down the stopper located under the back rest confirm that the stopper enlarged view in the enlarged view in the circle in the arrow direction circle is locked You will hear a click and slowly bring down forward the back rest Take care not allow it falling down suddenly CAUTION Do not insert hands or fingers Do not touch any section other than the section in the circle when operating the stopper between the arm rest and the back rest when moving the back rest Use of back pad and pillow Attach the back pad using the fastener on the back rest Attach the pillow using the magic tape on the back rest 1 Install the back pad van 2 Install the pillow Magic tape Fastener Back pad U MIA e Turn down the pillow backward before starting the massage e If you feel the massaging too hard return the pillow to the norma
20. NG WAVELET RUBBING O p a tN gt A gt m 7 0 0 2 2 Qu 2X3 X2 0 0 H0O 040 070 Y wW 7 U U ZY Relieves stiffened Relieves stiffened Comfortable Simultaneous KNEAD DOWN muscle from bottom muscle from top to TAPPING promote TAPPING and movement weaker to top bottom the blood KNEAD DOWN than the gentle circulation produce excellent strength feeling of comfort Features DEEP KNEAD DEEP KNEAD UP DOWN STRETCH SHIATSU CN Q 0 ARIA C O Je O70 U J KNEAD UP at a KNEAD DOWN at Relieves stiffness Presses level higher than the a level higher than from bottom to up concentrically at one strong the strong with combined place massaging of SHIATSU and ROLLING ROLLING WHOLE PART Relieves stiffness uniformly over the entire back Relieves stiffness concentrically at a limited area Fatigue relieving AIR massage and Vibration Stimulation by air and vibration promote the blood circulation over the entire body Air bags are provided for LEGS THIGHS BOTTOM WAIST BACK and ARMS Entire body is massaged with pleasant stimulus by air Built in vibrator provides additional stimulus rhythmically which promotes the blood circulation in a mood of relaxation COMBO FOOT REST provides massaging at the legs and other points simultaneously excepting the arms PULSE is a more effective mode that provides massaging by
21. aging intensity at 7 levels FOOT STRETCH button Allows turning ON OFF the FOOT STRETCH Air STRENGTH button Allows setting the air massaging intensity Air PART button Allows selecting the massaging part out of 6 parts Name and functions of components LCD display and information indicated on it Display during the AUTO COURSE See page 18 for method of use Indication of name of AURO Massaging function on the move COURCE on the move WHOLE BODY COURS MECHARSTANRI Mica AIR Indication of intensity of AUTO COURCE at 5 levels Indication of selected additional function Indication of air massaging intensity p Indication of present position Indication of vibration E of knead balls massaging Indication of remaining massaging time in minute Indication of air massaging movement Display when selected function is operating See page 28 for method of use Indication of massaging area WHOLE PART POINT Name of selected function 3 level display of knead ball Indication of remaining speed massaging time in minute Indication of massaging intensity at 7 levels Indication of width between knead balls at 3 levels Indication of present position of knead balls Indication of selected additional function for AIR Indication of air massaging intensity Indication of air massaging Indication of vibration of back massaging
22. ak bones osteoporosis etc If sickness or pain is felt during use stop using the massager and consult a doctor immediately Otherwise it may result in injury Attempt to use the massager up to 15 minutes for each use Limit the use of massager at one point up to 5 minutes Otherwise the use of massager at one point for a long time continuously may result in adverse effect Check the knead ball position for the sake of safety before leaning on the massager slowly Do not twist the body but lean on the massager straight so that the backbone is located at center of knead ball Otherwise leaning on the massager abruptly may injure the backbone or result in injury Do not pull the cord but the plug when unplugging the massager Otherwise the electric shock or short circuit may occur resulting in fire Do not use the massager with bare skin Otherwise it may result in a cause of injury Do not move the massager with a person on it Otherwise the massager may fall down IMPORTANT SAFETY INSTRUCTIONS WARNING 31 32 33 34 35 36 37 38 39 40 41 After use be sure to set the POWER switch to OFF position Otherwise it may result in accident or injury due to child s mischief Do not attempt to pull the back pad forcibly or hang from the back pad Otherwise the back pad may come off probably resulting in injury or broken massager Do not attempt to damage bend pull twist or bundle
23. ater pipe Earth connection is not cable Class 3 connection Service is provided established if plastic pipes are connected on the charge basis on the way 15 Reclining and use of foot rest Preparation e Insert the power cord plug in the receptacle and turn on the power switch on the chair Reclining the chair 1 While resting your back on the back rest press the DOWN of the RECLINER switch Upright condition If you keep holding down the DOWN switch the back rest GM Eo et CA FOOTREST RECLINER A goes down while the FOOT REST comes up Stimulation by the knead ball is intensified as much as the back rest is turned down AA WARNING Before reclining the BACK REST or elevating the FOOT REST confirm there is nobody pet or object at the behind under the foot rest or others It could cause accident injury or damage on furniture Do not step on the BACK REST ARM REST or FOOT REST Person stepping on or the chair itself could upset the chair main unit and cause accident or injury 2 When the BACK REST is turned down to a desired angle remove the hand from the RECLINER switch e Angle of the FOOT REST will also change along with aemo m th lini le of the BACK REST T e reclining angle of the BAC S Gw GH val FOOTREST RECLINER Request When changing the reclining angle during massaging gradually recline checking
24. by pressing the UP or DOWN button for the FOOT REST AA CAUTION o Foot rest goes down automatically You must confirm FOOT STRETCH there no obstructing object or child under the foot rest Pressing the VIBRATION button stops the movement Another push on the button resumes the movement O vam in FOOTREST RECLINER 21 Use of the AUTO COURSE Operate the following with the remote controller lid closed Air arm massage function can be selected during the AUTO COURSE Pressing the ARM button indicates the selected part of arm air with the reversing display Each push on the button changes the selected part one after another which is indicated with the reversing display ARM AIR CAUTION When using the ARM function confirm that COMBO ou have removed a wrist watch or other accessories from your LEFT RIGHT i Tomy STOP arms If you need to adjust the shoulder position during the AUTO COURSE use the UP or DOWN button of the ADJUST SHOULDER C Adjust Roller For Shoulder 16 As the AUTO COURSE is completed the knead balls a return automatically to the storing position Storing e When terminating the massage on the way press the START RESET button EEE Also in this case the knead balls return to the storing position 17 After using the chair turn the power switch OFF This will prevent the massaging move
25. e UP or DOWN button to adjust the SHOULDER position finely Adjust Roller For Shoulder e Movement of selected function is displayed approx 2 seconds after the SHOULDER position setting ADJUST SHOULDER Height button When using with the massaging area at POINT or PART pressing UP or DOWN button in the illustration adjusts the vertical height of knead balls Release the finger when the knead balls have moved to a desired position ADJUST SHOULDER 30 Movement adjustment of selective functions STRETCH button If you push the STRETCH button the setting menu for the STRETCH and COMPLEX STRETCH massaging is displayed in which the massage movement currently selected is displayed with high light The display changes at each push on the STRETCH button and the selected movement starts 2 seconds after the selection STRETCH Movement of the select function is displayed on the LCD STRETCH UP STRETCH TAPPING MM MM POINT spe 515 we dw 3D button 1 FUNCTION STRETCH If you push the 3D button the 3D massage setting menu is displayed and the massage movement currently selected is displayed with high light SPEED Display changes at each push on the 3D button and the selected movement starts 2 seconds after the selection Movement of the selected function is displayed on t
26. e message on the LCD display As the massage completes the knead balls return to the Storing position automatically while the Storing is shown on the display When terminating the massage on the way Press the START RESET button The knead balls return to the Storing position Turn OFF the power switch after use This prevents the massaging chair from starting inadvertently when the remote controller was operated accidentally CAUTION Turn OFF the power switch after use There is risk of accident by mischief of child Movement adjustment of selective functions WHOLE PART button PART POINT If you push the WHOLE PART button while either selected function is operating the present setting is displayed with high light on the setting menu If you push the WHOLE PART button to select the display changes 2 seconds later to the WHOLE or PART of the selective function display When you have selected the WHOLE at the first time after pressing the START button the shoulder position search takes place initially Movement adjustment of selective functions When setting the SHOULDER position by selecting the WHOLE 1 When you have selected the WHOLE at the first time after pressing the START button the SHOULDER position adjustment takes place initially 2 After the cycle of movement to the SHOULDER position push th
27. e strength is fixed and unchangeable at some parts of waist neck or shoulder 20 Use of the AUTO COURSE Operate the following with the remote controller lid closed 12 Air strength during each course can be set at one of two levels If you press the AIR STRENGTH button the current setting is indicated with the reversing display e Each push on the STRENGTH button switches the display of selected intensity e Selected intensity is indicated with the reverse display on the LCD 13 Additional function such as the PULSE COMBO FOOT REST or FOOT STRETCH can be selected during the AUTO COURSE VIBRATION function may be stopped e ach push on the PULSE COMBO FOOT REST or FOOT STRETCH selects the Accepted or Cancelled e Selected function is displayed on the LCD PULSE and COMBO FOOT REST can be selected at the same time but it is impossible to select at the same time PULSE and FOOT STRETCH or COMBO FOOT REST FOOT STRETCH With the FOOT STRETCH legs are massaged entirely by lowering the foot rest while it is pressurized with air Cancellation of COMBO FOOT REST means that the simultaneous movement with other parts is interrupted but the preset massaging of legs continues Accepted Angle of foot rest may be changed gradually when the movement COMBO NN FOOT REST is repeated If you do not like it it can be adjusted
28. efore reclining the back rest or elevating the foot rest confirm there is nobody pet or object at the behind under the foot rest or others It could cause accident injury or damage on furniture When massaging around or periphery of neck take care of the movement of knead balls and refrain from massaging with excessive intensity Accident or injury could result When reclining the back rest be careful not to pinch hands arms or feet between the back rest and the seat arm rest It could cause injury Raise the back pad before use to check if the cloth cover on the back rest as well as other sections is not broken If it is you must stop the use immediately disconnect the power cord plug and consult your dealer for repair Using the product with the cloth cover broken could cause injury or electrical shock Confirm before using that you have removed a wrist watch or other accessories from your hands or arms It could cause accident or injury Refrain from allowing a child or person who cannot express one s will to use the product alone There is risk of electrical shock or injury GO Do not use or store at a bathroom or others where the environment is highly humid It could cause electrical shock fire trouble or mold N CAUTION Time of use should not exceed 15 minutes or 5 minutes when using at the same position on the body Using for extended period of time could damage muscles or nerves Req
29. fy massaging Select desirable functions by 18 28 functions by pressing pushing corresponding corresponding switches for the switches AUTO COURSE and the selective function Check the back rest for Move the chair to avoid 15 18 28 interference with the wall or obstruction Turn OFF the power switch located at the back of arm chair functions Interrupted AE and back on again Remote contol Check for excessive load Separate your body from the 9 18 28 is disabled Excessive load on the knead back rest Turn OFF the balls activates the safety power switch located at the mechanism to stop all back of arm chair and back ON again Try to set again from the start 37 When trouble is suspected Phenomenon Inspection Point Remedy Reference Page Check the power cord plug for Insert the plug in the 16 Gime bidie disconnection receptacle securely Check the back rest for interference Move the chair to clear 15 with the wall or other obstruction from obstruction Service receptacle Check the power supply fuse for Replace the fuse 3A g is dead blowing Request Turn OFF turn ON then restart When the LCD of remote controller is showing Turn OFF turn ON then restart turn OFF and ON again the power supply as instructed f the above action does not improve the situation turn OFF the power switch disconnect the power cord plug and
30. h on the PULSE button select the Set or Cancel PULSE can be set when the AIR PART or ARM is selected PULSE 34 Movement adjustment of selective functions COMBO FOOT REST button COMBO FOOT REST If you press the COMBO FOOT REST the COMBO FOOT REST function is selected At each push on the COMBO FOOT REST button the function is Set or Cancelled COMBO FOOT REST can be set when the AIR PART is selected When the COMBO FOOT REST is selected legs are massaged simultaneously with other parts of body If the COMBO FOOT REST is cancelled selected parts of body are massaged one after another PULSE and COMBO FOOT REST can be selected simultaneously but it is impossible to select the PULSE and FOOT STRETCH or COMBO FOOT REST and FOOT STRETCH simultaneously When changing the COURSE on the way e The COURSE may be changed on the way without waiting the termination of currently selected AUTO COURSE Change from a AUTO COURSE another AUTO COURSE COMBO FOOT REST x Ra tA If you push directly a button under the AUTO COURSE button the specified name of AUTO COURSE is displayed If you change a COURSE on the way the COURSE movement may continue beyond 15 minutes after the start of movement However it will stop as the maximum 3
31. he LCD 3 D KNERD UP 3 D Kean DOWN D_ TAPPING 31 Movement adjustment of selective functions SPEED button A push on the SPEED button displays the current SPEED setting with high light SPEED can be set for the KNEAD UP KNEAD DOWN TAPPING WAVELET RUBBING DEEP KNEAD UP DEEP KNEAD DOWN STRETCH KNEAD UP STRETCH TAPPING and STRETCH WAVELET The display changes at each push on the SPEED button and the movement starts at the selected SPEED 2 seconds after the selection Selected SPEED is displayed on the LCD WIDTH button A push on the WIDTH button displays the current WIDTH setting with high light WIDTH can be set for the TAPPING STRETCH STRETCH TAPPING SHIATSU ROLLING and 3D TAPPING The display changes at each push on the WIDTH button and the movement starts at the selected WIDTH 2 seconds after the selection Selected WIDTH is displayed on the LCD STRENGTH button STRENGTH 3 s If you push the STRONG button or GENTLE button the present setting position lamp illuminates STRONG or GENTLE can be set for the KNEAD UP KNEAD DOWN TAPPING WAVELET STRETCH SHIATSU STRETCH KNEAD UP STRETCH TAPPING and
32. is applied H E LEGS amp H U J _ Concentrated Ta of neck A shoulder lt Approx 15 minutes gt EA Re T W Wo gt gt P om 2 ROLLING 4 TAPPING BACK AIR p 1 POINT NAVI 5 ROLLING t gt 13 WAVELET 14 ROLLING BACK AIR 7 KNEAD 15 KNEAD UP DOWN BOTTOM AIR 8 TAPPING 9 TAPPING BOTTOM p 16 ROLLING i 22 ROLLING WAIST AIR 1 i Pzd 18 KNEAD UP 21 KNEAD UP WAIST AIR BOTTOM H WAIST AIR eje 20 STRETCH BOTTOM ee WAIST AIR j 17 WAVELET 19 DEEP 1 t BOTTOM KNEAD UP AIR Di Lower body is massaged with air WAIST MECHA Concentrated massaging of waist lt Approx 15 minutes gt gt gt gt gt N f X p arr ued foe Ne ae z BN OAZ L POINTNAVI d 77 N 2 ROLLING Ne a i AR 1 g i it i ld f S Ket h f 5 ROLLING a NIA Art iM M li 4 TAPPING Hj wm n 3 KNEAD UP i T nr of lower enn with air is applied i in the order of legs thighs and bottom 26 Movements during the AUTO COURSE P 2 B b il Pe IE 7 Mes Fa S Massaging of lower body j with air is applied in the order of legs thighs and bottom WAIST MECHA p gt b 4 HA PA s 4
33. just Roller For Shoulder while the buzzer is sounding If you detect the body shape by pressing the START button it is stored in the memory till the massaging is terminated To change the body shape after it was stored press the START RESET button and after the cycle is completed start again When nobody is sitting or it failed to detect the body shape CAN NOT DETECT BODY SHAPE is displayed Press the course mode again and retry the body shape detection 19 Use of the AUTO COURSE Operate the following with the remote controller lid closed Content of massage COURSE Strength Air Strength Vibrator setting 10 As the cycle time to accept the ADJUST SHOULDER position elapses Finished POINT NAVI is displayed After showing the contour of YOUR BACK for approx 10 seconds the screen changes to the display of the name of AUTO COURSE massaging at present present position of knead balls type of massage COURSE STRENGTH air setting and remaining time of massage Name of AUTO COURSE Remaining time Position of knead balls in the spinal direction Air movement condition If you press the STRENGTH button on the way of massaging the strength of COURSE can be adjusted at 5 levels Default setting is at 3 If you push the button at the next it returns to the weakest level of 1 and it goes up step by step at each push on the button There are some positions where th
34. l position e When you do not use the massaging you can use it as a reclining chair with the back pad and the pillow attached at the specified positions AA WARNING Always confirm before use that the cloth cover over the back rest is not broken by lifting the back pad Confirm also other sections of the cloth are not broken If any breakage is discovered regardless how tiny it is stop the use immediately disconnect the power cord plug and consult your dealer for repair Using the chair without mending the breakage could cause injury or electrical shock 13 Preparation before use N WARNING Following persons must consult physician before using the product e Who are suffering from malignant tumors Who are suffering from acute sickness with aches Who has a heart disease Who uses a medical electronic device which is embedded in the body such as the pace maker or others Who has some abnormality or deformity of or on the backbone Who is undergoing medical treatment or feels some physical abnormality Who wishes to use the product at the section on the body which was treated previously or is ill now Who needs repose Who has problems in their legs with blood circulation Who is pregnant or in a period of monthly illness Who is suffering from fragility and osteoporosis Who has a high fever Who suffers from dysesthesia Who suffers from anemia Use of the product could cause abnormal condition on the body B
35. ment from starting unintentionally when the remote controller is operated accidentally CAUTION Make sure to turn the power switch off after use Otherwise it could cause accident by mischievous act of child or others 22 When terminating use on the way 1 If you press the PAUSE button during massaging after detecting the body shape in the AUTO COURSE the PAUSE on the display starts to flicker and the massaging stops retaining the knead balls at the present position e To restart the massaging press the PAUSE button once more e To terminate the massage on the way push the START RESET button Knead balls return to the Storing position in this case as well All buttons but the STOP or START RESET buttons are disabled while it is stopped PAUSE button is dead in the condition of During POINT NAVI and Storing 2 If the PAUSE condition continues more than 10 minutes SHOULDER the knead balls are retracted to the storing position while retaining the present position and the display shows the initial MECHA amp AIR COLLABORATION and Press the START SWITCH alternately e If you press the STOP button in the condition of During POINT NAVI and Storing the display shows also the initial MECHA Ege amp AIR COLLABORATION and Press the START SWITCH Storing alternately zz ae zi START SWITCH MECHA amp AIR 23 Move
36. ments during the AUTO COURSE e The AUTO COURSE provides preprogrammed movements only which are not adjustable Single massaging cycle runs for approx 15 minutes Contents of the AUTO COURSE are changed automatically depending on the remaining time on the timer or body shape e Following illustrations of the AUTO COURSE shows essential points only for better understanding e Massaging of legs bottom and thighs with air is abbreviated WHOLE BODY MECHA amp AIR Neck shoulders contour of back and waist are massaged uniformly Approx 15 minutes Me Sd eee emm LAM BOTTOM DOWN BOTTOM AIR AIR zs 9 TAPPING BOTTOM BOTTOM jie KNEAD 7 KNEAD j DOWN DOWN WAIST AIR l BACK AIR TAPPING 5 TAPPING 6 DEEP 10 30 KNEAD TAPPING DOWN WARTA WAVELET 1 POINT BOTTOM I BOTTOM NAVI AIR 14 DEEP gt TAPPING KNEAD UP 22 DEEP WAIST AIR KNEAD PM 15 KNEAD DOWN DOWN AN 24 WAVELET i BOTTOM e 20 KNEAD UP i WAIST AIR 2 KNEAD os 19 KNEAD DOWN BACK ATR WAIST AIR 18 DEEP KNEAD UP E i AIR Y 29 DEEP KNEAD UP 28 DEEP 30 KNEAD KNEAD DOWN DOWN 31 TAPPING EC S IGUPAREING 27 ROLLING Lower body is massaged with air 26 STRETCH H 25 WAVELET WHOLE BODY MECHA Neck shoulders contour of back and waist are massaged uniformly a 15 aa p WAVELET WAIST AIR 17 KNEAD Nel eine
37. mote Controller Wipe the remote controller with dry rags Back pad pillow seat pad and other textile products When they are soiled wipe with a piece of soft cloth moistened with warm water containing a small amount of neutral detergent and squeezed tightly and then dry naturally AA CAUTION Do not use alcohol other solvent polishing powder or others It could cause damage discoloration or cracks AA CAUTION Never wipe with wet towel or others It could cause trouble AA CAUTION Ironing is prohibited 9 Storing Remove stains and dirt and stow it at a dry place When storing the chair for a long time spread a cover over it to protect from dirt 39 AA CAUTION When storing the product avoid a place exposed to direct sunlight for a long time or high temperatures like next to heat source such as stove or others It could discolor or deteriorate the cover cloth Care and inspection Turn off the switch and Check for the following symptoms remove the power cord e Scorching smell plug from the e Overheat on the power cord or plug receptacle to prevent Care and inspection Power is turned on or off when the Stop to use gt trouble or accident Secure a long service life power cord is moved Consult always your with occasional e Other abnormal condition dealer Orus for inspections inspection or repair Request When s
38. ndition is reset and the knead balls are stored ARM button This button allows selecting ON OFF of air massaging of arms Desired body section and type of massage can be selected out of 10 options in the AUTO COURSE STRENGTH button Intensity of massaging can be adjusted at 5 levels during the AUTO COURSE FOOT STRETCH button Allows turning ON OFF the FOOT STRETCH STRENGTH button Allows setting the ATR intensity during the AUTO COURSE PULSE button Allows selecting the PULSE mode of AIR massaging PULSE mode cannot be used simultaneously with the FOOT STRETCH COMBO FOOT REST button Legs can be massaged simultaneously with other points UP DOWN buttons VIBRATION button Allows adjusting angles of the Turns ON OFF the vibrator at the back rest and the foot rest Foot seat rest movement is interlocked UP DOWN buttons per EP ar M Allows adjusting the angle at the FOOT TAPPING and REST only WAVELET are stopped when the back rest is reclined 10 Name and functions of components Remote controller lt Under the remote controller lid gt Movements of selective functions FUNCTION selector button Desired function can be selected from 10 kinds of massaging KNEAD UP DEEP KNEAD UP KNEAD DOWN DEEPKNEAD TAPPING DOWN WAVELET STRETCH RUBBING SHIATSU
39. ore starting the massage the Point Navi scans the body shape and the posture Technique to scan the massage line along the body shape has realized effective massaging STRETCH mode Stretch function relieves strains from bottom to top by applying rolling motions simultaneously with the shiatsu treatment 4 Complex massaging that adds up the KNEAD TAPPING and WAVELET to the stretch function relieves stiffness or fatigue more effectively 2 3D mode e DEEP and GENTLE features have been added to the KNEAD TAPPING and WAVELET functions Massage of new sensation relieves stiffened and tired muscles GP e Three dimension massaging that adds up the Fore aft movements to the conventional massaging functions has realized a stereoscopic kneading feel emulating professional skills FOOT STRETCH mode e FOOT STRETCH is a massaging mode with new sensation which allows moving up or down the foot rest in addition to the air massaging of legs N CAUTION In the FOOT STRETCH mode the FOOT REST will go down automatically while it is inflated with air You must confirm that there is no obstructing object or child under the FOOT REST before starting the mode Massaging with exquisite movements closely resembling human hands 11 basic movements that integrate sensations of professional masseur which are more friendly to human being KNEAD UP KNEAD DOWN TAPPI
40. tarting to use again after storing the equipment for a long time confirm before use that it operates properly Specifications Name Massage chair Model No SKS 1600 Weight 64 kg approx e When not reclined with foot rest stored Rated time 30 minutes 76 W x 112 D x 111 H cm Dimensions 29 9 W x 44 1 D x 43 7 H inches Power 115 W 50 60 Hz approx e When reclined with foot rest extended consumption 76 W x 166 D x 74 H cm Do not use the massager on other than 29 9 W x 65 4 D x 29 1 H inches the designated voltage 40 FUJIIRYOKI FUJI MEDICAL INSTRUMENTS CO LTD 04 05 30
41. the intensity of massaging 16 Reclining and use of foot rest 3 To raise the BACK REST press the UP button of the RECLINER switch If you keep holding down the UP button the BACK REST goes up while the FOOT REST comes down How to use the foot rest 1 Use the UP or DOWN button to adjust the angle of FOOT REST AA WARNING Before reclining the BACK REST or elevating the FOOT REST confirm there is nobody pet or object at the behind under the FOOT REST or others It could cause accident injury or damage on furniture 17 Use of the AUTO COURSE Operate the following with the remote controller lid closed START SWITCH y COURSE Fi 5 AUTO COURSE G wast Pause GMN Gras RSE CEE Ses AIR f COMBO ED GS MECHA NIGAL AIR e MECHA amp AIR means a massaging of the back with combination of knead balls and air MECHANICAL means a massaging course that provides massaging of back by the knead balls only AIR means the massaging course with air only Turn ON the power switch Power switch is found at the back of the left arm rest Press the START SWITCH and MECHA amp AIR COLLABORATION are indicated alternately on the LCD display Sit deep in the chair and recline yourself comfortably with the back of your head rest on the back rest Yo
42. u should be better to recline the back rest slightly to use well the Point Navi amp AIR zm 2 Press the START RESET button ADJUST A Select a COURSE is displayed Select a desired AUTO COURSE and push the button on the remote controller Select a course out of four courses of WHOLE SHOULDER WAIST and 7 MIN WHOLE SHOULDER and WAIST courses have further 3 types of mode selection menu respectively The display is switched at each push on the AUTO COURSE button and the selected mode starts to operate If you select the 7 MIN course the body shape detection is bypassed 18 Use of the AUTO COURSE Operate the following with the remote controller lid closed COMBO FOOTREST CAN NOT DETECT BODY SHAPE Press the course mode again Name of selected course and information are displayed and in case of MECHA amp AIR mode of WHOLE BODY course for example massaging of specified AUTO COURSE starts simultaneously with the start of body shape detection movement During POINT NAVI the detection point is indicated with the lamp and the detection level is shown with the detection indicator As the body shape is detected the knead balls move to the specified shoulder position If the specified shoulder position does not fit properly the position can be adjusted finely as desired To adjust press UP or DOWN button of Ad
43. uest Refrain from using the product for more than 30 minutes a day If any abnormality is observed or felt on the body during using the product stop it immediately and consult a doctor Make sure to turn off the power switch after use There is risk of trouble as a result of abuse by children Insert the power cord plug securely to prevent dirt accumulating on the legs It could cause electrical shock short circuit or fire Do not use the chair at the vicinity of source of fires such as stove or others or while smoking Refrain also from using it on a heating device such as the hot carpet or others There is risk of fire Do not massage the elbow knee head or belly It is also prohibited to insert hand or foot between the knead balls It could cause injury or disorder of physical condition Never place hands head or others under the foot rest or bottom of the chair It could cause accident or injury Do not use while wearing any hard hair ornament You could get hurt 14 Reclining and use of foot rest Place of installation 50 cm or more Secure sufficient spaces around the chair Request As the back rest is reclined the foot rest is turned up at the opposite end Minimum 50 cm of spaces must be secured both at the front and the back of the chair Request Bottom of the chair may damage the tatami mattress or floor It is recommended to spread a piece of mattress under
44. y adapter should be used only until a properly grounded outlet sketch A can be installed by a qualified electrician The green colored rigid ear lug or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover Whenever the adapter is used it must be held in place by a metal screw GROUNDING METHODS Sketch A Sketch B Sketch C Grounded outlet 1 9 1 5 Grounded outlet box Adapter gt Metal screw Tab for grounding screw Grounding pin Save these instructions Massager is intended for Household Use Only Be sure to check that there is not anybody children in particular pet or obstacle behind prior to inclining the back rest Otherwise it may result in a cause of injury or trouble Be sure to check that there is not anybody children in particular pet or obstacle behind prior to lowering the foot rest Otherwise it may result in a cause of injury Be careful not to operate the back rest with the cord wound on the main unit or with the cord hooked to the other obstacle Otherwise the unreasonable force may be applied to the cord probably resulting in a cause of fire or electric shock Be careful not to put the hand into the clearance at the underside of back rest or to the clearance between the back rest and arm rest Otherwise it may result in a cause of injury IMPORTANT SAFETY INSTRUCTIONS WARNING 19
Download Pdf Manuals
Related Search