Platinum Spot 35 PRO User Manual ver 1
Contents
1. PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com PECHESLIOWAL ELATION PLATINUM SPOT 35 PRO DMX Channel Values Functions VERSION 1 41 DMX Channels specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on orientation of the fixture head sase stan EXTEND io 2 x a 5 Intensity O to 100 gt 0 255 Dimmer Intensity FINE Adjustment 20 33 0 191 MAX to MIN Diameter 192 223 Pulse Opening FAST to SLOW 224 255 Pulse Closing SLOW to FAST 7 7 IRIS FINE 0 255 Iris FINE Adjustment FROST 0 127 OPEN 128 255 100 Frost ANIMATION WHEEL 8 127 Clockwise Rotation from FAST SLOW 128 135 NO Rotation 136 255 Counterclockwise Rotation from SLOW to FAST 23 25 37 CMY 8 COLOR WHEEL MACRO SPEED 0 255 MAX to MIN Speed 34 PLATINUM SPOT 35 PRO User Manual Version 1 51 www elationlighting com ELATION PLATINUM SPOT 35 PRO DMX Channel Values Functions VERSION 1 41 DMX Channels specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of oe 5 and PRISM effects depends on orientation of the fixture Basic stano EXT2. 113 F 10 C to 45 C APPROVALS RATINGS CE cETLus RoHs IP20 6 5 Intertek 3104374 Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 39 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com COLORS amp GOBOS Not To Scale For Illustrations Purposes Only Subject To Change Without Notice COLOR WHEEL 1 BLUE GREEN YELLOW ORANGE PINK C 1B ie Pos 2 Pos 3 Pos 4 Pos 5 Pos 6 5 7 Pos 8 COLOR FLAGS CYAN MAGENTA YELLOW C T O ROTATING INTERCHANGEABLE GOBO WHEEL 1 OD 28 8mm SEV Leh ey ie ID 25mm ID 24mm ID 24mm ID 24mm ID 24mm ID Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 Pos 6 ROTATING INTERCHANGEABLE GOBO WHEEL 2 OD 28 8mm 1 1 25mm 1D 24mm ID 24mm ID 24mm ID 24mm ID 24mm Pos 1 Pos 2 Pos 3 Pos 4 Pos 5 Pos 6 IMPORTANT NOTICE REGARDING GOBO DIMENSIONS AND CUSTOM GOBOS OD Outside Diameter ID Image Diameter Due to varying manufacturing processes it is highly recommended fo provide a gobo and holder sample from the fixture to 3rd party custom gobo vendors for accurate sizing Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 40 PLATINUM SPOT 35 PRO User Manual V
3. XXX Initial Effect Position INFORMATION Display Setting WDMX OFF Deactivate WDMX Activate WOMX Activate WDMX 0 Act 8 Data Out Act amp Data Out Clean WDMX Memo Reset Wireless DMX Memory Reset Default ON OFF Restore Factory Settings 2 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com PECHESLIOWAL PLATINUM SPOT 35 PRO SYSTEM MENU VERSION 1 specifications and features are subject to change without any prior written notice MAIN MENU SUBMENU OPTIONS VALUES Dstaut sotingsin DESCRIPTION Reesea T i o Restr O o osor Function 66 6006 0 000000007 0606 6004 Resets RRs Sher anon DO O Reset Manual Control PAN XXX P Fine Adjustments Effect Adjust Calibrate Values Calibrate Password ee Password 050 Standard Mode Basic Mode Extended Mode User Mode User Mode Set User Mode A User Mode B User Mode C 0 Edits User Defined PAN CHOI Channel Assignments DMX Channel Modes select Programs select Programs To Be Run Edit Program Step 01 SCxxx Program In Loop Program 10 Step 64 SCxxx save and Exit PAN ieas Save and Automatically Return Edit Scenes a Fade lime Manual Scenes Edit Scene Time Scene 250 Inout By Outside Stores Scenes via Ext DMX Console Record Controller Automatic Scenes Recorder Scene 001 FUNCTION Auto P
4. wOUd 55 1045 WANILV1d NOILW13 ELTATION PLATINUM SPOT 35 PRO User Manual www elationlighting com 2014 ELATION PROFESSIONAL all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ELATION brands and product names are trademarks or registered trademarks of their resoective companies ELATION PROFESSIONAL and all affiliated Companies hereby disclaim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe insufficient and negligent assembly installation rigging and operation of this product Elation Professional USA 6122 S Eastern Ave Los Angeles CA 90040 323 582 3322 323 832 9142 fax www elationlighting com info elationlighting com Elation Professional B V Junostraat 2 6468 EW Kerkrade The
5. REPLACING THE LAMP To ensure a proper safe lamp change carefully read all the following instructions LAMP PROTECTION CIRCUITRY Because of the nature of the extreme heat associated with the Phillips Platinum 35 lamp and the tight nature of the internal optical system it is IMPERATIVE that the lamp be replaced every 750 Hours This is done to protect the internal optical system as well as prevent accidental lamp explosion which could lead to hot glass particles falling from the fixture L3 FAILURE TO CHANGE THE LAMP AT THE 750 HOUR RATED LIFE WILL CAUSE THE FIXTURE TO AUTOMATICALLY SHUT DOWN At 750 Hours the LCD control display will begin to flash Replace The Lamp and the lamp will flicker for the first five minutes of operation this point the lamp has reached the maximum rated life and should be replaced immediately After 750 Hours the fixture will no longer resoond to DMX commands and immediately enter a hibernation mode that will electronically discontinue all fixture functionality with the exception of a few menu commands The fixture will continue to enter hibernation mode until the lamp is replaced and the lamp clock has been reset To replace the lamp follow the safety guidelines and procedures listed on the next page L THE PLATINUM 35 LAMP IS NOT A HOT STRIKE TYPE LAMP YOU MUST WAIT APPROXIMATELY 10 MINUTES AFTER POWERING THE LAMP OFF BEFORE YOU CAN POWER IT BACK ON AGAIN 11 PLATINUM SPOT 35 PRO Us
6. and Elation Professional product rechargeable batteries to be free of manufacturing defects in material and workmanship for a period of six months 180 days from the original date of purchase This warranty excludes discharge lamps and all product accessories This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service send the product only to the Elation Professional factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty Elation Professional will pay return shipping charges only to a designated point within the United States If any product is sent it must be shipped in its original package and packaging material No accessories should be shipped with the product If any accessories are shipped with the product Elation Professional shall have no liability what so ever for loss and or or damage to any such accessories nor for the safe return thereof C This warranty is void if the product serial number and or labels are altered or removed if the product is modified in any manner which Elation Professional concludes after insoection affects the reliability of the product if the product has been repaired or servic
7. can cause severe damage the retina NEVER operate this fixture with ANY of the protective covers removed These covers have been specially designed to shield against UV radiation LAMP REPLACEMENT Please note that due fo the nature of the Phillips Platinum 35R Lamp and the optical path of the fixture the lamp MUST BE replaced at 750 hours Use only Genuine Original Phillips platinum lamps Other brand lamps may cause damage and void warranty PLATINUM SPOT 35 PRO User Manual Version www elationlighting com 1 Lens Assembly 2 LCD Menu Control Display 3 Wireless DMX Indicator 4 DC Switch 5 Microphone 6 LEFT Button 7 DOWN Button 8 RIGHT Button 9 MODE ESC Button 10 UP Button 11 ENTER Button r He 12 Wireless DMX Antenna Handle s 13 4 1 4 ae Lamp Access Rear Panel 14 ee 15 Fuse 4 Power IN pbowerCON 16 kL 17 DMX IN 18 5pin DMX OUT 19 3pin DMX IN 20 3pin DMX OUT 0 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com LAMP INSTALLATION INSTRUCTIONS LAMP REPLACEMENT Please note that due the nature of the Phillips Platinum 35 Lamp and the optical path of the fixture the lamp MUST BE replaced at 750 hours Use only Genuine Original Phillips Platinum 35 Lamps Other brand lamps may cause damage and void warranty INSTALLING OR
8. i 3 127 Gobo Indexing a 189 Clockwise Gobo Rotation from FAST TO SLOW a 193 NO Rotation 194 255 Counterclockwise Gobo Rotation from SLOW to FAST a ROTATING GOBOS FINE INDEX ROTATION GOBO WHEEL 2 0 255 Gobo Rotation FINE Indexing 32 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com PECPESLIOWAL ELATION PLATINUM SPOT 35 PRO DMX Channel Values Functions VERSION 1 41 DMX Channels specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on orientation of the fixture head MODE CHANNEL VALUE FUNCTION E r ROTATING PRISM PRISM GOBO MACROS J ROTATING PRISM INDEX ROTATION 0 127 Prism Indexing 128 189 Clockwise Prism Rotation from FAST to SLOW 190 193 NO Rotation 194 255 Counterclockwise Prism Rotation from SLOW to FAST ROTATING PRISM FINE INDEX ROTATION gt 7 0 255 Prism FINE Indexing 0 255 Continuous Adjustment from NEAR to FAR a FOCUS FINE 0 255 Continuous FINE Focus Adjustment oe MOTORIZED ZOOM BASIC STAND EXTEND 255 ZOOM Adjustment from SMALL to BIG MOTORIZED ZOOM FINE ZOOM FINE Adjustment 255 a AUTO FOCUS 015 Auto Focus OFF 16 5m 47 7 5m cae 255 10m Ae AUTO FOCUS FINE 0 255 255 Continuous FINE Auto Focus Adjustment
9. packaging and materials to transport the fixture in for service DO NOT TOUCH the housing bare hand during its operation Turn OFF the power and allow approximately 15 minutes for the fixture to cool down before replacing or serving 8 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com DISCHARGE LAMP WARNING This fixture is fitted with a DISCHARGE LAMP which is highly susceptible to damage if improperly handled NEVER touch the lamp with your bare hands as the oil from your hands will shorten the life of the lamp Also NEVER move the fixture until the lamp has had ample time to cool Lamps are NOT covered under warranty conditions Avoid switching the fixture ON and OFF repeatedly in short intervals as this will reduce lamp life and intensity To achieve the intensity associated with discharge lamps these lamps use gas sealed in a high pressure environment to emit a brilliant output i Due to the high pressure involved with the construction of the lamp the lamp MAY EXPLODE DURING PROLONGED EXTENSIVE USE This risk is increased with age added care is encouraged when dealing with older lamps Thus the lamp must always be replaced at the end of their recommended duty cycle Extreme caution should be used when operating this or any fixture fitted with a gas discharge lamp UV RADIATION NOTICE This fixture emits intense UV radiation which is harmful to the eyes and skin The intense luminance of the lamp
10. D MAINTENANCE C A U T O N Disconnect power before cleaning or maintenance CLEANING Frequent cleaning is recommended to insure proper function optimized light output and an extended life The frequency of cleaning depends on the environment in which the fixture operates damp smoky or particularly dirty environments can cause greater accumulation of dirt on the fixture s optics e Clean the external lens surface at least every 20 days with a soft cloth to avoid dirt debris accumulation e Never use alcohol solvents or ammonia based cleaners MAINTENANCE Regular inspections are recommended insure proper function and extended life There are no user serviceable parts inside this fixture please refer all other service issues an authorized Elation service technician Should you need any spare parts please order genuine parts from your local Elation dealer Please refer to the following points during routine inspections e A detailed electric check by an approved electrical engineer every three months make sure the circuit contacts are in good condition and prevent overheating e Be sure all screws and fasteners are securely tightened at all times Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall e Check for any deformations on the housing color lenses rigging hardware and rigging points ceiling suspension trussing Deformations in the h
11. END r as CMY amp COLOR WHEEL MACROS MODE CHANNEL VALUE FUNCTION 96 103 Color Macro 12 120 127 Color Macro 15 144 151 Color Macro 18 248 255 255 Random Random CMY 000000 aS PAN TILT MOVEMENT SPEED 0 225 225 MAX to MIN Speed 235 Blackout by Movement cone 245 Blackout by ALL Wheel Changing 255 NO Function 7 PAN TILT MOVEMENT MODE 0 31 31 Quick 63 smooth 64 NO Function 35 PLATINUM SPOT 35 PRO User Manual Version 1 Evaro www elationlighting com ELATION PLATINUM SPOT 35 PRO DMX Channel Values Functions VERSION 1 41 DMX Channels specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on orientation of the fixture head MODE CHANNEL VALUE FUNCTION BASIC STAND EXTEND LAMP ON OFF RESET INTERNAL PROGRAMS 200 219 Internal Program 6 Scene 41 48 220 239 Internal Program 7 Scene 49 56 240 255 Music Control Scene of Program 1 36 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com ERROR CODES When power is applied the unit will automatically enter a Reset Test mode This mode brings all the internal motors a home position If there is an internal problem with one or more of the motors an error code will flash in the displ
12. INE ADJUSTMENT 0 255 FINE Adjustment of Color Wheel to Any Position ES 0 255 O WHITE 255 100 CYAN CYAN FINE 0 255 FINE Adjustment of CYAN oo 255 O WHITE 255 100 MAGENTA MAGENTA FINE 255 FINE Adjustment of MAGENTA YELLOW 0 255 O WHITE 255 100 YELLOW EAN 0 255 FINE Adjustment of YELLOW CTO COLOR 0 255 O WHITE 255 100 CTO Le CTO COLOR FINE 0 255 FINE Adjustment of CTO 3 PLATINUM SPOT 35 PRO User Manual Version EraTion www elationlighting com PECPESLIOWAL ELATION PLATINUM SPOT 35 PRO DMX Channel Values Functions VERSION 1 41 DMX Channels specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on orientation of the fixture head MODE CHANNEL VALUE FUNCTION BASIC STAND EXTEND eee OTATING GOBOS CONTINOUS ROTATION GOBO WHEEL 1 2 o on OOO T ROTATING GOBOS INDEX ROTATION GOBO WHEEL 1 00 0127 127 Gobo Indexing 189 Clockwise Gobo Rotation from FAST TO SLOW a 193 NO Rotation Se Counterclockwise Gobo Rotation from SLOW to FAST ROTATING GOBOS FINE INDEX ROTATION GOBO WHEEL 1 0 255 Gobo Rotation FINE Indexing a ROTATING GOBOS CONTINOUS ROTATION GOBO WHEEL 2 se aa B ROTATING GOBOS INDEX ROTATION GOBO WHEEL 2
13. In Program continued 3 Program Selection for Auto Pro Part e Select Edit Program e Press ENTER confirm e Select Select Programs e Press ENTER confirm e Select Auto Pro Part 1 Auto Pro Part 2 or Auto Pro Part 3 and select which slave program is to be sent Selection Part 1 means that the Slave unit runs the same program as the master units e Press ENTER confirm e Press MODE ESC in order return to the main menu 4 Program Selection for Edit Program e select Edit Program e Press ENTER confirm e select Edit Program e Press ENTER confirm e Select the desired program You can edit specific scenes into a specific program e Press ENTER confirm e Press MODE ESC in order to return to the main menu 5 Automatic Scene Recording e select Edit Program e Press ENTER confirm e Select Edit Scenes e Select desired scene numbers A maximum of 250 scenes can be programmed e Press ENTER confirm e Press MODE ESC in order to return to the main menu 27 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com EDIT PROGRAM Record Controller Working With Built In Program continued Example Program 2 includes scenes 10 11 12 amp 3 Program 4 includes scenes 8 9 amp 10 Program 6 includes scenes 12 13 14 amp 15 Auto Pro Part 1 is Program 2 Aut
14. N 1 Place fixture on a flat surface set shutter and dimmer channels a value of 255 2 Focus spot on a flat wall or similar area so a clear view of light output can be seen 3 Center the hot spot of the lamp brightest part of the beam using the 3 adjustment screws located under the rear cover plate labeled A B and C see image below Turn one screw ata time to move the hot spot diagonally across the projected image If you cannot detect a hot spot adjust the lamp until the light is even 4 reduce a hot spot pull the lamp in by turning all 3 adjustment screws clockwise a 1 4 turn ata time until the light is evenly distriouted Lamp 0 Lamp Adjustment Screws PLATINUM SPOT 35 PRO User Manual Version 1 6 www elationlighting com FIXTURE INSTALLATION FLAMMABLE MATERIAL WARNING Keep fixture at least 5 0 ff 1 5m away from any flammable materials decorations pyrotechnics etc ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and or installations CAUTIONS e For added protection mount the fixture in areas outside walking paths seating areas or in areas were unauthorized personnel might reach the fixture e Ambient operating temperature range for this fixture is 14 113 F 10 to 45 C Do not use the fixture under or above this temperature e Before mounting the fixture to any surface make sure t
15. Netherlands 31 45 546 85 66 31 45 546 85 96 fax www elationlighting eu info elationlighting eu DOCUMENT VERSION IE Please check www elationlighting com for the latest revision update of this manual DMX ocument Owale Channel Modes Version Version 9 22 15 27 29 Al Uodated manual format 2 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com CONTENTS General Information Warranty safety Instructions General Guidelines Discharge Lamp Warning Fixture Overview Lamp Installation Instructions Fixture Installation Fixture Menu WDMX Internal Wireless DMX Receiver Set Up DMX Channel Functions And Values Error Codes Cleaning and Maintenance Technical Specifications Optional Accessories 3 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com GENERAL INFORMATION INTRODUCTION Congratulations you have just purchased one of the most innovative and reliable lighting fixtures on the market today This fixture has been designed to perform reliably for years when the guidelines in this booklet are followed Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit These instructions contain important information regarding safety during use and maintenance UNPACKING Every unit has been thoroughly tested and has been shipped in perfect operating condition Carefully check the s
16. T PLUG FIXTURE INTO A DIMMER PACK NEVER TOUCH FIXTURE DURING OPERATION AS IT MAY BE HOT NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE SENSITIVE PERSONS MAY SUFFER AN EPILEPTIC SHOCK e For proper operation follow the Installation guidelines described in this manual Only qualified and certified personnel should perform installation of this fixture and only the original rigging parts brackets included with this fixture should be used for installation Any modifications will void the original manufactures warranty and increase the risk of damage and or personal injury e Never look directly into the light source of this fixture to prevent risk of injury your retina which may induce blindness Those suffering from EPILEPSY should avoid looking directly into the light source of this unit at all times e The fan and air inlets must remain clean and never blocked Allow approx 6 15cm between this fixture and other devices or a wall for proper cooling e Always disconnect from main power source before performing any type of service and or cleaning procedure Only handle the power cord by the plug end never pull out the plug by tugging the wire portion of the cord e Do not operate this fixture if the power cord has become frayed crimped and or damaged If the power cord is damaged replace it immediately with a new one of similar power rating 7 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com GENERAL G
17. UIDELINES NEVER OPEN THIS FIXTURE WHILE IN USE During the initial operation of this fixture a light smoke or smell may emit from the interior of the fixture This is a normal process and is caused by excess paint in the interior of the casing burning off from the heat associated with the lamp and will decrease gradually over time This fixture is a professional lighting effect designed for INDOOR DRY LOCATIONS ONLY on stage in nightclubs theatres etc Please make sure there are NO FLAMMABLE MATERIALS close fo the fixture while operating to prevent any fire hazard The fixture must be installed in a location with adequate ventilation at least 1 5 feet 5m from adjacent surfaces Be sure no air ventilation slots are blocked DO NOT attempt installation and or operation without knowledge how to do so DO NOT permit operation by persons who are not qualified to operate this type of fixture Most damages are the result of operations by nonprofessionals Consistent operational breaks may ensure the fixture will function properly for many years come DO NOT shake fixture avoid brute force when installing and or operating fixture Always install the fixture with an appropriate safety cable When installing the fixture in a suspended environment always use mounting hardware that is no less than M10 x 25 mm also be sure the hardware is insert in the pre arranged screw holes in the bracket of the fixture Use the original
18. ay in the form of XXer were as XX will represent a function number For example when the display shows OEr it means there is some type of error with the Pan motor If there are multipole errors during the start up process they will all flash in the display For example if the fixtures has errors on Channel 1 2 and 5 all at the same Time you will see the error message 01Er 02Er and O5Er flash repeated 5 times f an error does occur during the initial start up procedure the fixture will self generate a second reset signal and try to realign all the motors and correct the errors If the error persists affer a second attempt a third attempt will be made If after a third attempt all the errors have not been corrected the fixture will make the following determinations e 3 or More Errors The fixture cannot function properly with three or more errors therefore the fixture will place itself in a stand by mode until subsequent repairs can be made e Less Than 3 Errors The fixture has less than 3 errors therefore most other functions will work properly The fixture will attempt to operate normally until the errors can be correct by a technician The errors in question will remain flashing in the display as a reminder of internal errors Pan Movement Er Tilt Movement Er Gobo Wheel 1 Er Gobo Wheel 2 Er Color Wheel Er 37 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com CLEANING AN
19. e DMX512 data feed and does not influence conventional devices DMX splitters are used and RDM control is to be used these splitters must support RDM The number and type of RDM parameters depend on the RDM controller being used PERSONALITY Display Setting Key Lock When ON Control Panel buttons lock automatically after exiting main menu for 15 seconds To unlock keep MODE ESC button pressed for 3 seconds 24 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com EFFECT ADJUST Test Channel select and auto test each individual channel function independently from the DMX control board EFFECT ADJUST Manual Control select and manually test and fine adjust each individual channel function Independently from DMX control board This function will center PAN and TILT motors and set dimmer to 100 PAN and TILT functions will still operate if the fixture needs to be positioned to a flat clear surface With the individual functions you can focus the light a flat surface wall and perform fine adjustments EFFECT ADJUST Calibration IEY ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION This function allows small adjustments to be made to the effect wheels Color Gobo Shutter etc to compensate for ware or in the event a sensor has been knocked slightly out of place Because improper use of this function can result in undesired operation this function has been password protected T
20. ed by anyone other than the Elation Professional factory unless prior written authorization was issued to purchaser by Elation Professional if the product is damaged because not properly maintained as set forth in the product instructions guidelines and or user manual D This is not a service contract and this warranty does not include any maintenance cleaning or periodic check up During the periods as specified above Elation Professional will replace defective parts at its expense and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of Elation Professional under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of Elation Professional All products covered by this warranty were manufactured after January 1 1990 and bare identifying marks to that effect E Elation Professional reserves the right to make changes in design and or performance Improvements upon its products without any obligation to include these changes in any products theretofore manufactured F No warranty whether expressed or implied is given or made with respect to any accessory supplied with the products described above Except to the extent prohibited by applicable law all implied warranties made by Elation Professional in connection with this product including warranties of merchantability or fitn
21. er Manual Version 1 www elationlighting com LAMP SAFETY INSTRUCTIONS e ALWAYS replace lamp every 750 Hours e Use only Genuine Original Phillips Platinum 35 lamps Other brand lamps may cause damage and void the warranty e NEVER touch the lamp with your bare hands Oil from your hands will shorten the life of fhe lamp e Always disconnect the fixture s main power supply before replacing lamp e Allow fixture to cool for at least 15 minutes before attempting any type of service e Make sure ALL covers panels are replaced secured before operating the fixture to prevent any risk and or damage fo eye retina from UV Radiation exposure LAMP INSTALLATION PROCEDURE l1 Place the fixture a flat surface turn the center screw on the rear cover plate counterclockwise and pull panel door down access the lamp e 0 Te 130 C CAUTION HOT LAMP Let the lamp cool down for 10 min LAMP MSR Platinum 35 Lamp adjustment can be accessed by loosening the quick lock screw above to open the external cover and then turn the screws A B C to adjust the lamp to accurate position Lamp MUST BE replaced at 750 Hours Use only Genuine Original Philips platinum lamps Other brand lamps may cause damage and void warranty 12 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com LAMP INSTALLATION PROCEDURE continued 2 Grab the base of the installed lamp and turn it from t
22. er unit can send up to 3 different data groups to the Slave units i e a Master unit can start 3 different Slave units which run 3 different programs The Master unit sends the 3 program parts in a continuous loop Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Part 1 Part 2 Part 3 Part 1 Part 2 Part 3 Part 1 Part 2 Part 3 The slave unit receives data from the Master unit according to the group which the slave unit was assigned to If e g a Slave unit is set Slave 1 in the menu Set to Slave the Master unit sends Auto Program Part 1 to the Slave unit If set to Slave 2 the Slave unit receives Auto Program Part 2 To start an Auto Program proceed as follows 1 Slave Setting e Select Function Mode e Press ENTER confirm e Select Set to Slave e Press ENTER confirm e Select Slave 1 Slave 2 or Slave 3 e Press ENTER confirm e Press MODE ESC in order to return to the main menu 2 Automatic Program Run e Select Function Mode e Press ENTER confirm e Select Auto Program e Press ENTER confirm e select Master or Alone e Press ENTER confirm e Press MODE ESC in order return to the main menu 26 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com EDIT PROGRAM Record Controller Working With Built
23. ersion 1 LATION www elationlighting com PHOTOMETRIC DATA lt _ F C SS sas 10m ft ft MIN ZOOM 5 ft Distance 5 16 4 7 5 24 6 10 32 8 peng eae Sa epee Photometrics lux lux lux FULL ON 76 880 7 142 33 000 2 18 750 2 50 Beam 5m 7 5m 10m MAX ZOOM m ft m 8 m 8 Distance 5 16 4 75 24 6 10 32 8 TE Photometrics lux lux lux FULL ON 2 725 1 290 4 PLATINUM SPOT 35 PRO User Manual Version elationlighting com 22 8 98 6 580mm 727mm 27 8 707mm 356mm Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 482mm 42 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com OPTIONAL ACCESSORIES AC3PDMX5PRO 5 ft 1 5m 3pin PRO DMX Cable AC5PDMX5PRO 5 ft 1 5m 5pin PRO DMX Cable Additional Cable Lengths Available 43 PLATINUM SPOT 35 PRO User Manual Version 1
24. ess are limited in duration to the warranty periods set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said periods have expired The consumer s and or dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall Elation Professional be liable for any loss and or damage direct and or consequential arising out of the use of and or the inability to use this product G This warranty is the only written warranty applicable to Elation Professional products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published 6 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com SAFETY INSTRUCTIONS This fixture is an extremely sophisticated piece of electronic equipment To guarantee a smooth operation it is important to follow the guidelines in this manual The manufacturer of this device will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual This device falls under PROTECTION CLASS 1 It s essential this device be grounded properly Only qualified personnel should perform all electrical connections I N D OORS U S E ONL Y DO NOT EXPOSE FIXTURE RAIN AND MOISTURE UNPLUG POWER BEFORE SERVICING FIXTURE DO NO
25. he LOCK position counterclockwise to the OPEN position then carefully pull the lamp out from the fixture Towards you N ACs IA 6 proper lamp installation be sure to align the the tock line p C 13 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com LAMP INSTALLATION PROCEDURE continued 3 Carefully insert the new lamp into the fixture aligning the 2 gold pins on the lamp base with the OPEN position proper lamp installation be sure to align the lam knob with the lock line 7 14 PLATINUM SPOT 35 PRO User Manual Version 1 LATION www elationlighting com LAMP INSTALLATION PROCEDURE continued 4 Grab the base of the newly installed lamp and turn it from the OPEN position clockwise to the LOCK position making sure the lamp is securely installed LOCK POSITION ui a lamo ins tallation be sure to alio a C Ta 45 C 7 Te 130 C CAUTION HOT LAMP Let the lamp cool down for 10 min LAMP MSR Platinum 35 Lamp adjustment can be accessed by loosening the quick lock screw above to open the external cover and then turn the screws A B C to adjust the lamp to accurate position Lamp MUST BE replaced at 750 Hours Use only Genuine Original Philips platinum lamps Other brand lamps may cause damage and void warranty A lt 15 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com LAMP OPTIMIZATIO
26. he installation area can hold a minimum point load of 10 times the weight of the fixture e Fixture installation must always be secured with a secondary safety attachment such as an appropriate safety cable e Never stand directly below the device when mounting removing or servicing 17 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com MOUNTING POINTS e Overhead mounting requires extensive experience including amongst others calculating working load limits installation material being used and periodic safety insoection of all installation material and the device If you lack these qualifications do not attempt the installation yourself Improper installation can result in bodily injury e Fixture is fully operational in the specific mounting positions as illustrated below ESL NO NENI SS N ME ILA SKA XA XA XAN E N j 1 lt w Kab v A Wi AS 0 v 2 pa gt m Mer SAFETY CABLE Always use a Safety Cable whenever installing this fixture in a suspended environment to ensure the fixture will not drop if the clamp fails PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com CLAMP MOUNTING The PLATINUM SPOT 35 PRO provides a unique mounting bracket assembly that integrates the bottom of the base the included Omega Brackets x2 and safety cable rigging point in one unit see the illustration below When mount
27. he password is 050 and must be entered each time the calibration menu function is entered Because calibration is an extremely delicate procedure instructions on performing this action are left out of this manual For a first time calibrator please contact our customer support team for step by step instructions USER MODE SET User Mode Select operating mode which includes DMX Channel and User defined modes USER MODE SET Edit User Mode Create user defined channel orders allowing the fixture to match the channel order other fixtures on the market for easier operation A total of three user modes may be configured User Mode A User Mode B and User Mode C EDIT PROGRAM Select Program Select one of the 10 user defined internal Auto Programs EDIT PROGRAM Edit Program Edit any of the 10 user defined internal Auto Programs EDIT PROGRAM Edit Scenes Edit any of the scenes of the internal Auto Programs 25 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com EDIT PROGRAM Record Controller The fixture features an integrated DMx recorder by which you can transmit the programmed scenes from your DMxX controller to the moving head Adjust the desired scene numbers via the encoder from to When you call up the scenes at your controller they will automatically be transmitted to the moving head EDIT PROGRAM Record Controller Working With Built In Programs A Mast
28. hipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully insoect your unit for damage and be sure all accessories necessary to Operate the unit have arrived intact In the event damage has been found or parts are missing please contact our customer support team for further instructions Please do not return this unit your dealer without first contacting customer support at the number listed below Please do not discard the shipping carton in the trash Please recycle whenever possible BOX CONTENTS e 2 Omega Brackets e 1 3 DMX Cable e 1 powerCON Cable e 1 Safety Cable e Manual amp Warranty Card 4 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com CUSTOMER SUPPORT Elation Professionale provides a customer support line provide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www elationlighting com for any comments or suggestions For service related issue please contact Elation Professional ELATION SERVICE USA Monday Friday 8 00am to 5 00pm PST Voice 323 582 3322 Fax 323 832 9142 E mail support elationlighting com ELATION SERVICE EUROPE Monday Friday 08 30 to 17 00 CET Voice 31 45 546 85 30 Fax 31 45 546 85 96 E mail support elationlighting eu WARRANTY REGISTRATION Please complete and mail in the encl
29. ing this fixture truss be sure secure an appropriately rated clamps to the included omega brackets using a M10 screw fitted through the center hole of the Omega Bracket Be sure to attach the included Safety Cable to the fixture using the safety cable rigging point integrated in the base assembly 6 1 Omega holders pac 2 Clamp 3 Safety rope 4 Quick lock fastener piia eee SBS Ud i ee SECURING Regardless of the rigging option you choose for your PLATINUM SPOT 35 PRO always be sure secure your fixture with a safety cable The fixture provides a built in rigging point for a safety cable on the hanging bracket as illustrated above Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle 19 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com FIXTURE MENU ON BOARD SYSTEM MENU The PLATINUM SPOT 35 PRO comes with an easy to navigate system menu The next section will detail the functions of each command in the system menu LCD MENU CONTROL PANEL The control panel see image below located on back of the fixture allows you to access the main menu and make all necessary adjustments to the PLATINUM SPOT 35 PRO During normal operation pressing MODE ESC button once will access the fixture s main menu Once in the main menu you can navigate through the different functions and acces
30. link directly from the EWDMX Transmitter First be sure the fixture s is powered ON and then hold down the configuration button on the EWDMX Transmitter for as least 5 seconds This will automatically clear the link between the EWDMX Transmitter and any fixture that is powered ON All EWDMX indictors will glow solid RED if the procedure was successful FIXTURE WIRELESS INDICATOR RED GREEN Rapid Flashing syncing an EWDMxX Transmitter RED GREEN Slow Flashing Paired with an EWDMxX Transmitter but not receiving a DMX signal from a controller GREEN Solid Paired with an EWDMxX Transmitter and receiving DMX data RED Solid Not paired with an EWDMX Transmitter FREE 30 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com PECHESLIOWAL DMX CHANNEL FUNCTIONS AND VALUES ELATION PLATINUM SPOT 35 PRO DMX Channel Values Functions VERSION 1 41 DMX Channels specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on orientation of the fixture head MODE VALUE FUNCTION pee ooo PAN MOVEMENT 8 BIT 0 255 PAN Movement E PAN FINE MOVEMENT 16 BIT Fine Control of PAN Movement OE M Movement o TILT MOVEMENT 16 BIT Fine Control of TILT Movement E 194 255 Counterclockwise Color Wheel Rotation from SLOW to FAST COLOR WHEEL F
31. nect the fixture to the external controller and power ON 2 Set the DMX value of Channel 1 on the controller to 7 3 Set the DMX value of Channel 2 on the controller to 7 or 8 When set to 7 the DMX address can be set between 1 and 255 When set to 8 the DMX address can be set between 256 and 511 4 Using Channel 3 on the controller set the desired DMX address of the fixture Example 1 the desired DMX address is 57 set Channel 1 to a value of 7 set Channel 2 to a value of 7 and then set Channel 3 to a value of 57 Example 2 If the desired DMX address is 420 set Channel 1 a value of 7 set Channel 2 to a value of 8 and then set Channel 3 to a value of 164 256 164 420 5 After setting Channel 3 to the desired DMX address value wait for approximately 20 seconds for the fixture fo complete the address reset function PERSONALITY Service Setting RDM PID select various submenus via RDM RDM stands for Remote Device Management which provides the ability control the device remotely while connected to a DMxX bus ANSI E1 20 2006 by ESTA specifies the RDM standard as an extension of the DMX512 protocol Manual settings like adjusting the DMX starting address are no longer needed This is esoecially useful when the device is installed in a remote area RDM ready and conventional DMX devices can be operated in one DMX line The RDM protocol sends its own packages in th
32. o Pro Part 2 is Program 3 Auto Pro Part 3 is Program 6 The 3 Slave groups run the Auto Program in certain time segments See below Part 1 Reet eae See Part 2 M sees seo some es Part 3 i 1 1 i 28 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com WDMX INTERNAL WIRELESS DMX RECEIVER SET UP The PATINUM SPOT 35 PRO is equipped with an internal Wireless DMX Receiver which is fully compatible with an Elation Wireless DMX System Access the Wireless DMX sub menu from the PERSONALITY menu and then select the desired WDMX connection function which includes WDMxX Off Turn OFF Wireless DMX Activate WDMX Turn ON Wireless DMX Act amp Data Out Turn ON Wireless DMX and send DMX data to wired 3 5pin outputs Clean WDMX Memo Clear WDMX memory When the WDMX system is Activated the internal DMX IN XLR jacks are OFF However the internal DMX OUT XLR jacks will function normally If the fixture is powered ON with the internal WDMX system Activated it will automatically scan for a wireless DMX signal from an Elation Wireless Transmitter L If NO wireless signal is received it will electronically switch to the wired DMX mode 6 NEVER connect a fixture a controller via a DMX cable when the WDMX system is in use This could cause serious damage the controller SETTING UP THE WDMX SYSTEM Foll
33. osed warranty card or register online nito www elationlighting com Login aspx to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written down on a piece of paper and included in the shipping container the unit is under warranty you must provide a copy of your proof of purchase invoice Items returned without a R A number clearly marked on the outside of the package will be refused and returned at customer s expense You may obtain a R A number by contacting Customer support Sr IMPORTANT NOTICE There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty Damages resulting from modifications this fixture and or the disregard of safety and general user instructions found in this user manual void the manufactures warranty and are not subject to any warranty claims and or repairs 5 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com LIMITED WARRANTY A Elation Professional hereby warrants to the original purchaser Elation Professional products to be free of manufacturing defects in material and workmanship for a period of two years 730 days
34. ousing could allow for dust to enter into the fixture Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously injure a person s e Electric power supply cables must not show any damage material fatigue or sediments Never remove the ground prong from the power cable 08 PLATINUM SPOT 35 PRO User Manual Version 1 www elationlighting com TECHNICAL SPECIFICATIONS SOURCE 800 Watt Platinum 35 Lamp gt 20 000 Lumens 7 800k gt 75 CRI 750 Hour Average Life May vary depending on several factors including but not limited to Environmental Conditions Power Voltage Usage Patterns On Off Cycling Control and Dimming EFFECTS Bi Directional Animation Effect 3 Facet Rotating Indexing Prism and Frost Filter Mechanical Dimming 0 100 High Soeed Mechanical Shutter Strobe Iris COLOR 8 Interchangeable Dichroic Colors Including UV CMY Color Mixing CTO amp CIB Color Correction GOBOS 2 Rotating Gobo Wheels 12 Interchangeable Rotating Indexing Glass Gobos CONTROL CONNECTIONS 3 DMX Channel Modes 27 29 41 6 Button Touch Control Panel Full Color 180 Reversible LCD Menu Display 16 Bit Resolution Adjustable Movement and Spin DMX In Out 3 powerCON Power In SIZE WEIGHT Length 17 6 477mm Width 20 0 507mm Vertical Height 28 6 727mm Weight 79 0 Ibs 36 kg ELECTRICAL THERMAL AC 100 240V 50 60Hz 1 200W Max Power Consumption 14 F
35. ow the instructions included with the Elation EWDMX Transmitter and connect to the output of your DMX controller To sync your fixture with the Elation EWDMX Transmitter follow the steps below e Initially the Wireless Indicator on the fixture control panel should be solid RED e Press and hold the configuration button on your EWDMX Transmitter for about 3 seconds The RED GREEN LED indicators on the EWDMxX Transmitter and the fixture should begin to flash rapidly for about 5 10 seconds while the two systems pair e Once the fixture is paired with the EWDMX Transmitter T1 the Wireless status indicators on the both the fixture and the EWDMX Transmitter will stop flashing and glow solid GREEN If paring is unsuccessful repeat the process until paring is secured e The fixture will store the pairing information inside a nondestructive memory bank once a link is created between the fixture and an EWDMX Transmitter The fixture will remember the paired EWDMX Transmitter even if the fixture is turned OFF for extended periods of time 29 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com CLEARING EWDMX TRANSMITTER LINK e Access the Wireless DMX sub menu from the PERSONALITY menu and then select Clear WOMX Memo to clear any existing link between the fixture and a EWDMxX Transmitter The Wireless indictor on the fixture will turn solid RED when the is severed e You may also clear the
36. re LAMP CONTROL Lamp ON via DMX When ON lamp can be powered ON via a DMX controller LAMP CONTROL Lamp OFF via DMX When ON lamp can be powered OFF via a DMX controller LAMP CONTROL Lamp ON at Temp The fixture is designed to shut the lamp OFF when an excessive temperature Is sensed inside the head by the on board CPU The lamp is shut OFF prevent damage to the lamp and avoid possible internal damage the fixture head This function sets the MIN internal operating temperature of the fixture head before the lamp will restrike after the lamp has been automatically shut OFF LAMP CONTROL Lamp OFF at Temp The fixture is designed to shut the lamp OFF when an excessive temperature Is sensed inside the head by the on board CPU The lamp is shut OFF to prevent damage to the lamp and avoid possible internal damage to the fixture head This function sets the MAX internal operating temperature of the fixture head when the lamp will automatically be shut OFF D WHEN THE TEMPERATURE AROUND THE LAMP IS HIGHER THAN THE PRESET VALUE CONTINUOUSLY FOR UP TO 5 MINUTES THE LAMP WILL SHUT OFF AUTOMATICALLY WHEN THIS HAPPENS YOU CANNOT RE STRIKE THE LAMP AGAIN AUTOMATICALLY YOU MUST RE STRIKE THE LAMP MANUALLY 23 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com PERSONALITY Status Settings Address Via DMX When ON define the desired DMX address via an external controller 1 Con
37. rogram Define fixture mode Master or Alone for running Auto Programs Select desired internal programs under Select Program set the number of steps under Edit Program and edit individual scenes under Edit Scenes 22 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com LAMP CONTROL When the actual temperature around the Lamp becomes higher than the preset value the Lamp will shut down within 5 minutes automatically e When the LCD menu displays Off restrike of the Lamp MUST be done manually e When the LCD menu displays Hot the actual temperature around the Lamp is still higher than the preset value and restrike of the Lamp is NOT possible e When the LCD menu displays the internal temperature with a lowercase letter 6 celsius or f fahrenheit the Lamp is ON but NOT at 100 full intensity e When the LCD menu displays the internal temperature with a capital letter C or F the Lamp is ON and at 100 FULL intensity gt LAMP CONTROL Lamp ON or OFF When ON manual control of lamp power can be accessed via system menu This menu item controls the LAMP ON OFF software command only Striking of the lamp via the system menu can only occur when the LAMP ON OFF is set fo ON and the actual temperature around the lamp Is lower than the limited value LAMP CONTROL Automatic Lamp ON OFF When ON lamp is automatically powered ON when power is applied to fixtu
38. s the sub menus with the UP DOWN RIGHT and LEFT buttons Once you reach a field that requires adjusting press the ENTER button to activate that field and use the UP and DOWN buttons to adjust the field Pressing the ENTER button once more will confirm your setting You may exit the main menu at any time without making any adjustments by pressing the MODE ESC button NOTE To access the LCD Menu Control Display via the internal battery press and hold the DC SWITCH button for 2 seconds The LCD Menu Control Display will shut OFF automatically about 1 minute from the last button press To shut OFF the LCD Menu Control Display immediately set Reset Default menu option to ON in the Personality menu and press the ENTER button to confirm your selection PLATINUM SPOT 35 PRO 20 PLATINUM SPOT 35 PRO User Manual Version www elationlighting com PECHESLIONWAL ELATION PLATINUM SPOT 35 PRO SYSTEM MENU VERSION 1 specifications and features are subject to change without any prior written notice MAIN MENU SUBMENU OPTIONS VALUES Default Settings in BOLD DESCRIPTION FUNCTION DMX Value MINS Password XXX Password 038 Password Software Version Automatic Lamp ON OFF ON OFF Lamp ON OFF when Power ON LAMP 20 45 C 68 174F VISA status Settings PERSONALITY Key Lock ON OFF Key Lock Temperature C F Celsius Fahrenheit Temperature Switch Between C F Initial Status PAN
Download Pdf Manuals
Related Search