ARIS Export Tools for ArcGIS 9.3 User`s Manual
Contents
1. If no extension or another extension than json or geojson is specified the extension json will be added to the output file automatically Reproject to WGS84 Option to convert the coordinates from the input coordinate system to GCS_WGS_ 1984 Output coordinate system Coordinate system of coordinates written to export file The output coordinate system is the same as the input coordinate system unless the option Reproject to WGS84 is checked In that case the output coordinate system is GCS_WGS_1984 The output coordinate system can not be changed by the user Geographic transformation The transformation method to be used to convert the input coordinate system to the output coordinate system This parameter is enabled only when a reprojection is desired and transformation methods are available Minimize GeoJSON file When this option is checked the output GeoJSON file is written as one single line without any unnecessary blanks Export selected features only When this option is checked only features currently selected in the feature layer are exported Export the selected fields The fields of which values are to be exported Note that by default no fields are checked ARIS 10 ARIS Export Tools for ArcGIS 9 3 User s Manual Pi Export to GeoJSON e g Input features Export selected worldmap y features only Input coordinate system optional When t2. or make any attempt to alter the license number and other license information shown in the about box The LICENSEE shall not remove or obscure any ARIS copyright or trademark notices The LICENSEE shall not make additional copies of the PRODUCT beyond what is laid down in the permitted uses section of this AGREEMENT The license granted by this AGREEMENT shall commence upon LICENSEE s receipt of the PRODUCT and shall continue until such time as the LICENSEE elects to discontinue the use of the PRODUCT ARIS terminates the agreement due to the LICENSEE s material breach of this AGREEMENT Upon termination of this AGREEMENT in either instance LICENSEE shall return to ARIS the PRODUCT and any whole or partial copies in any form The parties hereby agree that all provisions operating to protect the rights of ARIS shall remain in force should breach occur ARIS 12 ARIS Export Tools for ArcGIS 9 3 User s Manual Limited Warranty ARIS warrants that the media upon which the PRODUCT is provided will be free from defects in materials and workmanship under normal use and service for a period of ninety 90 days from the date of receipt Except for the above express limited warranties the PRODUCT is provided as is without warranty of any kind either express or implied including but not limited to the implied warranty of merchantability and fitness for a particular purpose Exclusive Remedy and Limitation of L
3. see http www aris nl download ARIS ARIS Export Tools for ArcGIS 9 3 User s Manual 4 Version History 4 1 Version 1 0 Version 1 0 is the first release of ARIS Export Tools for ArcGIS and can be used with ArcGIS 9 2 not released publicly 4 2 Version 2 0 ArcGIS 9 3 and 9 3 1 compatibility Version 2 0 of the ARIS Export Tools for ArcGIS can be used only with ArcGIS 9 3 and 9 3 1 4 3 Version 2 0 1 Installation Better check on valid ArcGIS versions in setup ARIS ARIS Export Tools for ArcGIS 9 3 User s Manual 5 Using Export Tools in ArcMap 5 1 Using Export to KML The Export to KML tool exports features of a featurelayer in the map or featureclass on disk to a file with KML format We recommend to run the tool in foreground because running the tool with background geoprocessing enabled may cause problems The user has to provide the input features the output file and the geographic transformation method Also a number of options can be chosen E Export to KML Input features Input coordinate system optional EJES Export to KML The Export to KML tool part of ARIS Export Tools for ArcGIS facilitates export of A RRA features to KML format files Output coordinate system optional Geographic transformation optional Minimize KML file Export the selected fields optional Select All Unselect All Export labels optional The following parameters sh
4. selected field will be attached to the exported features so they can be used for labeling placemark 5 2 Using Export to GeoJSON The Export to GeoJSON tool exports features of a featurelayer in the map or featureclass on disk to a file with GeoJSON format We recommend to run the tool in foreground because running the tool with background geoprocessing enabled may cause problems The user has to provide the input features the output file and the geographic transformation method Also a number of options can be chosen e Export to GeoJSON Input features Input coordinate system optional y GeoJSON output file C Reproject to WGS84 Output coordinate system optional Geographic transformation optional Minimize GeoJSON file Export the selected fields optional EJES Exportto GeoJSON Y The Export to GeoJSON tool part of ARIS Export Tools for ArcGIS facilitates export of features to GeoJSON format files Select All Unselect All The following parameters should be provided ARIS ARIS Export Tools for ArcGIS 9 3 User s Manual Parameter Description Input features Features from selected layer or featureclass will be exported in GeoJSON format Input coordinate system The coordinate system of the Input Features layer This is determined automatically and can not be changed GeoJSON output File Full path of GeoJSON output file to be written
5. the Layer to KML tool of ArcGIS are e Choose the Geographic Transformation e Export Attribute Fields e Export Label Field e Export selected features 1 2 GeoJSON The Export to GeoJSON tool exports a featureclass or featurelayer to a GeoJSON file GeoJSON is a geographic data interchange format based on JSON JavaScript Object Notation and can be used to display geographic data with amongst others OpenLayers GeoServer and GDAL 1 3 Requirements The Export Tools for ArcGIS require that ESRI s ArcGIS 9 3 or ArcGIS 9 3 1 be installed For other versions of ArcGIS see http www aris nl download for availability of ARIS Export Tools versions A version for ArcGIS 10 0 is already available ARIS ARIS Export Tools for ArcGIS 9 3 User s Manual 2 Installation Before you can install ARIS Export Tools you should have installed the following e Microsoft NET framework 2 0 e ESRI ArcGIS 9 3 or 9 3 1 ArcView ArcEditor or Arclnfo We refer to ESRI for installation of the software Installation of the ARIS Export Tools is accomplished by running ArisExportTools2 msi The Windows installer will guide you through the installation process After installation the following files must be present e ARISExportTools dll e ARISExportToolsA dll e ARISExportToolsA exe e ARISExportTools pdf Start ArcMap and open ArcToolbox window The toolbox ARIS Export Tools should be present in ArcToolbox If not right click the ArcToolbox f
6. ARIS ARIS Export Tools for ArcGIS 9 3 User s Manual 28 February 2013 ARIS B V http www aris nl Table of contents 1 Introduction 1 cca a eee eet a eee eee 3 LAS 4 cere o ee Carre reer err en 3 12 GCOS SON oo at Gaia ntae seats 3 A 2 252 E EA A E A ap stele A EAEN AN 3 2 Installation ii dedicado 4 3 Registrations isuski riri a Aid 5 4 VErsiOM HISO a a R AAEE ERI EEEL ASA TAA E R Eer AE EATE 7 Al Version O ae O ae 7 42s Version 2 0 O ara aE 7 43 Version 2 O OO 7 5 Using Export Tools ini ArCMa p iessen raice aata aa iaa aaa a aaa cil 8 5 1 Using Export to KML ecseri rid nii cidad di 8 5 2 Using Export to GeoJSON srining ia N AAE NNE 9 5 3 Known ISSUES ii a A A at 11 Appendix A License Agreement ccccccceceeeeeeceeceeeeeeeeceaeceeeeeeeseceneaeceeeeeeesescneaeeeeeeesesenaees 12 ARIS Export Tools for ArcGIS 9 3 User s Manual 1 Introduction The ARIS Export Tools for ArcGIS facilitate the export of features to files with KML and GeoJSON format 1 1 KML The Export to KML tool exports a featureclass or featurelayer to a KML file KML Keyhole Markup Language is a file format used to display geographic data in Google Earth Google Maps Google Maps for mobile and OpenLayers KML uses a tag based structure with nested elements and attributes and is based on the XML standard Note that this tool generates a KML file and not a KMZ file Advantages of the Export to KML tool compared to
7. Copyright The PRODUCT is owned by ARIS and partly by its third party licensor s and is protected by Dutch copyright laws and subject to international laws treaties and or conventions The LICENSEE agrees not to export the PRODUCT into a country that does not have copyright laws that will protect ARIS s proprietary rights Permitted uses The LICENSEE may use the number of copies of the PRODUCT for which license fees have been paid on computer system s and or specific computer network s for the LICENSEE s own internal use The LICENSEE may install the number of copies of the PRODUCT for which license or update fees have been paid onto permanent storage device s on computer system s and or specific computer network s The LICENSEE may make one 1 copy of the PRODUCT for archival purposes only during the term of this AGREEMENT unless the right to make additional copies has been granted by ARIS to the LICENSEE in writing The LICENSEE may use parts of the documentation in other documents for LICENSEE s own internal use only with the purpose of using or encouraging to use the PRODUCT Uses not permitted The LICENSEE shall not sell rent lease assign timeshare or transfer in whole or in part or provide unlicensed third parties access to prior or present versions of the PRODUCT any updates or the LICENSEE s rights under this AGREEMENT The LICENSEE shall not reverse engineer decompile or disassemble the PRODUCT
8. his option is checked only features currently selected in the ArcMap project are exported GeoJSON output file C data world Reproject to WGS84 Output coordinate system optional Geographic transformation optional Minimize GeoJSON file Export selected features only Export the selected fields optional C AREA C PERIMETER C vr94_ C YR94_ID ABBREVNAME FIPS_CODE C PR_PoP2000 C P_0_14_89 P 15 64 89 lt Mm Select All Unselect All In the example above only the selected features from the layer worldmap are exported to GeoJSON The input data has a Van Der Grinten coordinate system but the output will be in WGS84 Also two fields are exported to the properties of each feature in the output GeoJSON file 5 3 Known Issues Background geoprocessing enabled may cause problems especially when running the tools several times within one ArcMap session Sometimes the parameter Geographic Transformation is not set required while it should be In this case the tool does not check whether Geographic Transformation is filled in and the features will be exported without transformation When opening the tool again from the Results Window the tool dialog opens with populated parameters based on the tool execution The tool can run again with the unchanged parameters without a problem However in this case the dependency between the parameters does not work well so changing for example
9. iability During the warranty period ARIS s entire liability and the LICENSEE s exclusive remedy shall be the return of the license fee paid for the PRODUCT that does not meet ARIS s limited warranty and that is returned to ARIS or its dealers with a copy of the LICENSEE s proof of payment ARIS shall not be liable for indirect special incidental or consequential damages related to LICENSEE s use of the PRODUCT even if ARIS is advised of the possibility of such damage Waivers No failure or delay by ARIS in enforcing any right or remedy under this AGREEMENT shall be construed as a waiver of any future or other exercise of such right or remedy by ARIS Order of Precedence Any conflict and or inconsistency between the terms of this AGREEMENT and any purchase order or other terms shall be resolved in favour of the terms expressed in this AGREEMENT subject to Dutch law unless agreed otherwise Governing Law This AGREEMENT is governed by the laws of the Netherlands without references to conflict of laws principles Entire Agreement The parties agree that this constitutes the sole and entire agreement of the parties as to the matter set forth herein and supersedes any previous agreements understandings and arrangements between the parties relating hereto and is effective valid and binding upon the parties ARIS is a registered trademark the Netherlands ARIS 13
10. ion form Enter Key Enter the registration name and key below exactly as given to you Hardware fingerprint E39C C246 Name Key Cancel Buy Now If you don t have a registration key you can press the button Buy Now This will take you to our online store where you can purchase the product Note that you will need the hardware fingerprint of your computer shown in the registration form After you have completed your purchase a personal registration key will be sent to you by email Please store this key in a safe place Once you have entered you name and a valid registration key press OK This key will be stored on your computer The reminder message will not be shown again When your trial license is expired the following message appears in the ArcMap result view and a popup window is shown to register the tool Execution of the tool is aborted Export to GeoJSON q Executing Export to GeoJSON C close this dialog when completed successfully Start Time Mon Jun 27 15 05 12 2011 No valid license found for ARIS Export Tools for AreGis You must register to use the product Use the popup window for registration Failed to execute ExporttoGeoJSON Failed at Mon Jun 27 15 05 14 2011 Elapsed Time 2 00 seconds The registration forms are also accessible through the ARIS License Checker For more information and a free download of the ARIS License Checker
11. ly While in evaluation mode each time you start running one of the Export tools a reminder message will be shown in the ArcToolbox results view Export to Geo JSON EJ DN Central Meridian 5 36763688888889 PARA a METER Scale Factor 0 9999079 PARAMETER Latitude Of Origin 52 15616055555555 U NIT Meter 1 0 false true Start Time Fri Jun 24 11 00 56 2011 This is a trial license of ARIS Export Tools for ArcGIS C Close this dialog when completed successfully When the maximum number of coordinate pairs is exceeded in evaluation mode an error will be shown in the message log and the export will be cancelled Export to KML EJ Executing Export to KML C close this dialog when completed successfully This is a trial license of ARIS Export 4 Tools for ArcGIS For Polylines only a maximum of 5 coordinate pairs can be exported with a trial license Export is canceled Failed to execute ExporttoKML Failed at Mon Jul 04 15 03 31 2011 While in evaluation mode the following form will be shown to be able to register the tool ARIS ARIS Export Tools for ArcGIS 9 3 User s Manual Reminder E The current license for ARIS Export Tools for 4rcGIS is a trial license Press Register to register this product and use the permanent license OK button will be enabled in 3 seconds Pressing the Register button will take you to the registrat
12. older and choose Add toolbox Browse to System Toolboxes and select ARIS Export Tools tbx The tool is ready to use now The tools can also be run from the Catalog window in ArcMap by browsing to Toolboxes System Toolboxes ArcToolbox EJ E ArcToolbox BY 3D Analyst Tools EY Analysis Tools A Export to GeoJSON A Export to KML 3 Cartography Tools 8 Conversion Tools 3 Data Interoperability Tools 3 Data Management Tools amp Editing Tools 8 Geocoding Tools BY Geostatistical Analyst Tools amp Linear Referencing Tools 8 Multidimension Tools BY Network Analyst Tools Y Parcel Fabric Tools 8 Schematics Tools amp Server Tools 3 Spatial Analyst Tools 3 Spatial Statistics Tools 3 Tracking Analyst Tools ARIS ARIS Export Tools for ArcGIS 9 3 User s Manual 3 Registration The distributed version of the ARIS Export Tools for ArcGIS is an eveluation version This means it can be used for evaluation purposes for 5 days After this period the tool will be locked until a valid license key is entered While in evaluation mode only featureclasses with a maximum number of coordinate pairs can be exported The export of featureclasses or selected features containing more than the maximum number of coordinate pairs will be cancelled The maximum number of coordinate pairs is 3 5 and 7 for featureclasses with the multi point polyline and polygon featuretype respective
13. ould be provided Parameter Description Input features Features from selected layer or feature class will be exported in KML format Input Coordinate System The coordinate system of the Input Features layer This is determined automatically and can not be changed KML Output File Full path of KML output file to be written If no extension or another extension than kml is specified the extension kml will be added to the output file automatically Output Coordinate System Coordinate system of coordinates written to export file The output coordinate system always is ARIS 8 ARIS Export Tools for ArcGIS 9 3 User s Manual GCS_WGS_ 1984 cannot be changed and is only displayed for information Geographic transformation The transformation method to be used to convert the input coordinate system to the output coordinate system Minimize KML file When this option is checked the output KML file is written as one single line without any unnecessary blanks Export selected features only When this option is checked only features currently selected in the ArcMap project are exported Export layer symbology Use Symbology properties from ArcMap At this time only color and line thickness will be used for export Export the selected fields The fields of which values are to be exported Note that by default no fields are checked Export labels The values of the
14. the Reproject option does not affect the Output Coordinate System as it should and can give undesired results Rerun the tools from the Results Window may cause the error ERROR 000820 The parameters need repair followed by the error R6025 pure virtual function cal when closing ArcMap ARIS 11 ARIS Export Tools for ArcGIS 9 3 User s Manual Appendix A License Agreement ARIS Software License Agreement for ARIS Export Tools for ArcGIS This is a license agreement and not an agreement for sale This license agreement hereinafter referred to as AGREEMENT is between the end user hereinafter referred to as LICENSEE and ARIS b v The Netherlands hereinafter referred to as ARIS and gives the LICENSEE certain limited rights to use the proprietary ARIS software examples on line and hardcopy documentation and updates if applicable hereinafter referred to as PRODUCT All rights not specifically granted in this AGREEMENT are reserved to ARIS Ownership and grant of license ARIS and its third party licensor s retain exclusive rights title and ownership of the copy of the PRODUCT licensed under this AGREEMENT and hereby grant to LICENSEE a personal non exclusive non transferable license to use the PRODUCT based on the terms and conditions of this AGREEMENT From the date of receipt the LICENSEE shall agree to make reasonable efforts to protect the PRODUCT from unauthorized use reproduction distribution or publication
Download Pdf Manuals
Related Search