Installation information METTLER TOLEDO Floor scales Spider VLF
Contents
1. Installation information METTLER TOLEDO Floor scales Spider VLF FLOOR SCALES SPIDER VLF 1 General This installation information contains all necessary details regarding the setting up an putting into operation of the following weighing platforms SPIDER VLF 600 A SPIDER VLF 1500 A e Information regarding operation can be found in the operating instructions e Information regarding maintenance rectification of malfunctions an repairs is contained in the service manual 22004315 ad Installation 2 1 Selecting the location A Never operate in hazardous areas or in the areas hazarded by gases vapors mists and dusts e The foundation at the installation site must be capable of safely supporting the weight of the weighing platform at the support points when it carries the maximum load At the same time it should be so stable that no vibrations Cozze occur during weighing operations A I L e Ensure that vibrations due to machines near the installation site are kept to a minimum Installation information 22004312A 02 2001 1 SPIDER VLF 3 Setting up 3 1 Setting up the weighing platform 3 2 Connecting the terminal e Route connection cable to the terminal Caution 1 FLOOR SCALES Depending on the model the following accessories must be available when you set up the weighing platform e 2 approach ramps or e 1 approach ramp and 1 set of foot plates with horizontal st2. formation of the corresponding weighing terminal 5 Dimensions O50 Dimensions VLF DS VLF D VLF E VLF ES A 1000 1000 1250 1500 B 1000 1250 1500 1500 Installation information 22004312A 02 2001 3 22004312 Subject to technical changes Mettler Toledo Albstadt GmbH 02 2001 Printed in Germany 22004312A Mettler Toledo Albstadt GmbH D 72458 Albstadt Tel 49 7431 14 0 Fax 49 7431 14 232 Internet http www mt com
3. op or e 2 sets of foot plates with horizontal stop Place approach ramps and or foot plates on the floor in front of and behind the weighing platform Lift weighing platform and position the leveling feet in the slots provided in the ramps or foot plates Ensure the surface is completely flat in the area of the scale location especially in the region of the leveling feet and the foot plates and ramps are positioned horizontally Small differences in height can be compensated by adjustable feet Align ramps and foot plates Mark position of the ramps resp foot plates It is essential to fix them to the floor through drill holes using the dowels provided Foot plates 2 dowels each ramp 2 dowels each Route connection cable to terminal so that it is protected against possible damage e Connect terminal Please consult the operating instructions of the terminal for the steps involved in connceting the terminal Installation information 22004312A 02 2001 FLOOR SCALES SPIDER VLF 4 Scale configurations The scale is configured ex factory as follows e approvable e SingleRange 1 x 3000 e The following configurations can be set Verification Scale Interval Type Maximum Capacity approvable non approvable SPIDER VLF 600 A 600 kg 0 2 kg 0 2 0 1 0 05 kg SPIDER VLF 1500 A 1500 kg 0 5 kg 0 5 0 2 0 1 kg The scale configuration can be changed in the service mode Please see the installation in
Download Pdf Manuals
Related Search