110iss 1399 KB
Contents
1. Center Cover Removal 1 Remove the Top Cover Page 7 5 2 Release the Ink Supply Tubes from the Raceway Holder Remove the Raceway Holder from the Printer 3 Release the Tubes from the retaining clips in the Center Cover 4 Remove 4 T 10 screws that secure the Center Cover to the Printer Femoclondintiioion A 5 Remove 2 T 10 screws that secure the Center Cover from the rear 6 Open the Printhead Door 7 Remove the Center Cover from the Printer CD Re ad non Right End Cover Removal 1 Remove the Center Cover gt Page 7 7 2 Open the Printhead Door 3 Release the Door Sensor from the Right End Cover 4 Remove 1 T 10 screw that secures the Right End Cover to the Printer Femoclondintiioion A 5 Remove 1 T 10 screw from the Right Side Bracket 6 Release the clips that secure the Right End Cover to the Printer use a flat blade screwdriver if necessary 7 Remove the Right End Cover from the Printer A Re ad non Left End Cover Removal 1 Remove the Center Cover gt Page 7 7 2 Disconnect the Front Panel cable from the rear of the Printer Disconnect 3 Remove 1 T 10 screw from the Rear Left Trim 4 Remove the Rear Left Trim from the Printer Removal and vsialoron A 5 Remove 1 T 10 screw from the Left Side Bracket 6 Release the clips that secure the Left End Cover to the Printer use a flat blade screwd2. river if necessary oe 7 Remove the Left End Cover from the Printer a a he re T g Ink Supply Station Cover Applicability 70 100 100plus 110plus Removal 1 Remove the Center Cover gt Page 7 7 2 Remove the Right End Cover Page 7 9 3 Release the Ink Tubs from the clip on the ISS Cover 4 Remove 2 screws that secure the ISS Cover to the Ink Supply Station 5 Remove the ISS Cover from the Printer Ink Supply Station Removal Switch off the product and remove the power cable 1 Remove the Center Cover gt Page 7 7 2 Remove the Right End Cover Page 7 9 3 Remove the ISS Cover Page 7 13 4 Release the Plastic Cover protecting the Electronics Module 5 Disconnect the Ink Supply Station Cable from the Main PCA A Re anton 6 Remove 1 T 10 screw securing the Plastic Cover Remove the Plastic Cover from the Printer 7 Cut the Plastic Tie that secures the Ink Supply Station Cable to the Power Supply Unit 8 Release the Tubes Bracket from the Ink Supply Station by pushing the clips inwards and lifting up the Bracket 9 Remove 2 T 10 screws that secure the Ink Supply Station A Rr anon 10 Move the Ink Supply Station to the left to release it from the securing clips 11 Remove the Ink Supply Station from the Printer
Download Pdf Manuals
Related Search