Sway bar end links
Contents
1. SHING END LINK ASSEMBLY ASSEMBLY LINK BUSHINGS TYPE B TWO CENTER End Link LINK System TYPES SWAY BAR FORM 2 4 142. SWAY BAR END LINK INSTALLATION INSTRUCTIONS MOTION CONTROL 3560 Cadillac Ave Costa Mesa CA 92626 A Please refer to a factory service manual before any disassembling or reassembling of your vehicle for proper specifications Check service manual to make sure all torque specs are properly done in the installation Prothane Motion Control highly recommends this and all our poly urethane suspension kits be installed by a qualified automotive technician 1 With the vehicle side safely raised so that the suspension has no load on the assembly work section familiarize yourself with the basic components of the vehicle s sway bar system 2 Begin the bushing replacement process by removing the original sway bar end links from both sides of the sway bar system noting the original assembly order beforehand 3 In the case of the TYPE B sway bar end link system remove the original end link bushings by trimming the outer lip of the bushings with a utility knife and pressing out the bushings from the opposite side 4 If the particular kit included suppled grease lubricate the new bushing areas where a suspension twisting action metal contact area would occur when fully assembled 5 Assemble the new end link components to the system using original tool torque amounts SWAY BAR SWAY BAR TYPE A SWAY BAR BUSHING End Link woe ASSEMBLY System ASSEMBLY Si y ot ein IF CONTROL ARM SWAY BAR BU
Download Pdf Manuals
Related Search