ES5 and ES10 Water Nozzle Assembly Instructions
Contents
1. ES5 and E510 Water Nozzle Assembly Instructions CAUTION Read and understand this service bulletin thoroughly before starting Only a trained experienced service technician should attempt this service procedure Water Nozzle Assembly Repair Parts Part 1411 20 Water Nozzle and Spring To properly install a new water nozzle it may require the cleaning of the inside diameter of the water inlet assembly at the bottom of the heat generator This might be necessary due to water quality building up deposits and the shrinkage of the Teflon water inlet assembly over a long period of time This can be accomplished by using a common drill bit as a tool and hand reaming the water inlet assembly hole Be careful to use only the correct 1 4 size drill bit and not to remove any excess material The steam function should be activated to clear out any loose particles remaining in the inlet assembly before the nozzle is installed The new water nozzle should fit inside the water inlet assembly with slight resistance not tight and not loose EmberGlo A Division of Midco International 4140 West Victoria Street Chicago Illinois 60646 Ebert lo toll free 866 705 0515 tel 773 604 8700 fax 773 604 4070 web www emberglo com e mail sales emberglo com Quality Designed for Proven Performance 511 8471 40 Printed in USA
Download Pdf Manuals
Related Search