TSB-1078 - Service Manual Correction - Tray Heaters
Contents
1. Connect the large connector C to connector CN602 as described in the previous procedure2. TO 3 f BA Copier Bulletin TSB 1078 Date 4 8 2011 Leading Innovation gt gt gt Page 1 of 3 Models e STUDIO1355 Series Subject Service Manual Correction Tray Heaters Overview Corrections are needed to the Connecting the Tray Heaters section of the e STUDIO1355 Series Service Manual Detail Please download the corrected manual or store the following corrections with your service manual The corrected manual is version 00a or later posted on 3 25 2011 Corrections are in red Location of the Incorrect Description Installation gt Main Machine gt Installation gt Connecting the Tray Heaters of the Main Machine pages 54 56 in the e STUDIO1355 Series Service Manual v00 Corrected Text Connecting the Tray Heaters of the Main Machine The machine comes from the factory without the tray heaters already installed but disconnected Tray heater installation is optional The heaters should be connected if the location has high humidity Consult with the customer before connecting the tray heaters Doing this procedure connects the folowing anti condensation heaters inside the main machine at the following locations One unit below the transfer unit if installed Two units in the paper tray unit if installed One unit in the scanner unit if installed One unit in the LCIT if installed Copyright 2009 Toshiba America Business Solutions Inc TABS This publication contains proprietary and confidentia
3. l information retained for reference purpose by authorized TABS dealers Unauthorized use of this information is prohibited TABS makes no express or implied warranty including implied warranties of merchantability for a particular purpose with regard to this technical publication and disclaims any claim arising by reason of the possession or use thereof b234i901 12341301 a 1 Switch off the main power switch and disconnect the power cord from the power source 2 Open the PSU box A To set the connector 1 Connect the white connector B to CN602 on the AC drive board C NOTE Connect the large connector o beneath the board alia ara aa aea aiararesia aia ara aml A ays aiata nrs aea w w wv v v v v v v w v v To supply power 24 hours a day Doing the connection in the previous procedure assures that power is supplied to the machine for the heaters even after the main machine is switched off with the main power switch for However with only this connection the heaters do not operate while the main machine is operating Another connection can be done so the heaters in the paper tray unit will stay on continuously The 24 hours a day connection applies only to the tray heaters not the transfer and scanner units B b234i391 1 Remove the small connector A from the relay connector and then connect it to connector CN606 2 Clamp the relay connector B to the bracket of the AC drive board 3
Download Pdf Manuals
Related Search