Home

Apollo-155 - Sealite Pty Ltd

Contents

1. NINI BI RM gt Bullet Connector Eye L Connectors Cable Glands Bullet Connector Figure 3 Battery and Battery Box Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm 3 4 Connecting the Lantern To connect the Apollo 155 to the solar powered system e Connect the blue negative wire of the lantern to the battery negative termainal e Connect the brown positive wire of the lantern to the battery positive terminal The lantern must to be connected to a 12v DC power supply Please ensure the solar panel array has been installed appropriately To maximise solar collection the solar panel array should be installed facing the equator and in a location that ensures it will not be shaded by buildings trees or other structures Solar panels will significantly reduce in efficiency if a small shadow is positioned over the solar panel IMPORTANT it is important to work with the team at Sealite when determining the quantity and size of both batteries and solar panels for this lantern Duty cycle intensity and local solar conditions are important factors to take into consideration when building a solar powered battery supply Sealite solar marine lanterns will give years of trouble free service if installed correctly initially Please ensure all connections are tight e Please ensure that solar panels are alw
2. T4 www sealite com 2 D gt N z o apa L Fr Quality ISO 9001 A SAI GLOBAL m LS ES tea we ee FX Apollo 155 age Lantern Adjustable from 4 12ni Version 1 3 www sealite com Apollo 155 i Integrated bird deterrent spiked cap colour of cap designates light colour d eee dh Independently controlled LEDs 16 ultra high intensity LEDs E s gt can be conngured JO create mounted into 16 segment flashing sectored or multi focus lens a ee eee d rotating lantern 155mm diameter lens amp integrated pr Automatic night activation anodised aluminium heat sink patents pending S lt A l ISS S AH SN SS PC programming port 2n 12v DC power supply Z i gt Vent MSN NES Diam 15 9 x 25 4 slot 0 63 x 1 Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm aitgereit odo ere Page 4 Technology MR ME Page 4 Apollo 155 Model rrrrnnnnnnnnnnnnnnnnnnrnnnnrnnnnvnnnnnnnnnrnnnnennnnnnnnnnnnnnnennnsen Page 5 Product Components rrrrnnnnnrnnnnnrnnnnnrrnnnnrnnnn
3. Marine Lanterns 1 12nm EA o DA a eR ceat S Monitoring amp Control Systems Bridge amp Barge Lights Area Lighting Marine Buoys up to 3mt in diameter Es 23 j z Ver c d Mooring Systems amp Accessories Sealite www sealite com Head Office A LA Sealite Pty Ltd 11 Industrial Drive ES v Somerville Vic 3912 ALSM nues tnbus Tel 61 3 5977 6128 COGNIs Fax 61 3 5977 6124 S A Email info sealite com g s Internet www sealite com A 5 o s Department of Defence Latest products and information available at www sealite com
4. Shipwreck 1 2 alternating bank 1 amp bank 2 The lantern will flash one complete flash characteristic using the LEDs of bank 1 It will then flash a complete flash characteristic using the LEDs of bank 2 It will then flash using the LEDs of bank 1 again All LEDs positioned in banks 3 amp 4 will be turned off All LEDs in banks 1 amp 2 will flash with the same flash characteristic at the same intensity This is used on a shipwreck lantern Cycle 1 2 3 4 cycle bank 1 to 4 The lantern will flash one complete flash characteristic using the LEDs of bank 1 It will then flash a complete flash characteristic using the LEDs of bank 2 Then bank 3 and then bank 4 This was used to make a rudimentary rotating lantern it has been included for legacy support only Sector the lantern can flash a different flash characteristic on each sector Each LED can be run at a different intensity Complex Sector the lantern can flash a different flash characteristic at a different sync delay at a different intensity for each LED This provides complete independent control over each LED on the lantern Rotating Full Speed CCW the lantern will rotate anti clockwise at full speed on the selected flash character Rotating Half Speed CCW the lantern will rotate anti clockwise at half speed on the selected flash character Rotating Bank 1 CCW using bank 1 LEDs only the lantern will rotate anti clockwise at full speed o
5. 4 2 9 Washer 10mm 2 10 Self Locking Nut 10mm SUPPORT POST NOT PROVIDED 200Ah 12V BATT WEATHER PROOF BOX amp GALVANIZED SECURITY CAGE Approx weight 120kg 2 No 85 WATT 12V SOLAR MODULE ON MOUNTING FRAME Alternative setup using 2 x 85W panels Lantern duty cycle and intensity will determine the size and quantity of solar panels and batteries Figure 2 Installation of Solar Panel amp Battery Box Cage Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm 3 2 Installing the Solar Panel amp Battery Box Cage The battery box cage Ref 2 2 and the steel support bracket Ref 2 4 are attached to the post Ref 2 3 using coach screws and washers Ref 2 6 2 7 a Drill the post for the steel support bracket 6 places and install using supplied screws IMPORTANT the Solar Panel must face the equator Locate the solar panel support bracket accordingly b Drill the post for the battery box cage 6 places on the opposite side to the solar panel and install using supplied screws c Install the solar panel and frame Ref 2 1 and the brace Ref 2 5 to the steel support bracket using bolts Ref 2 8 washers Ref 2 9 and nuts Ref 2 10 3 3 Installing the Battery Box Refer to Figure 3 Battery and Battery Box during installation of the battery and
6. HEX 8F F1 45 07 04 BO F2 Request Lantern Colour sv Intensity Selection from a Desired PWM value Direct PWM value 0 Lantern Description SLO39 Rev 1 00 Trade Show lt SLO3 Rev3 1 00 Trade Show SLO39 Rev1 Master Board unknown software version Please contact Sealite for the latest version of the Sealite Lantern Programmer www sealite com au 33 Existing Configuration Colour Green Operation Setting Always On Effective Intensity Correction Flash Code 000 None Talbot Plateau Intensity 100 000 High Schmidt Clausen Allard Blondel Rey Douglas Allard Ohno Couzin Em 1372 6 Candela This Lantern can achieve Correction Factor the desired range at 99 04 www sealite com au Image 5 Sealite Lantern Programmer Intensity tab showing Intensity Selection nm Intensity Selection cd Intensity Selection PWM amp Effective Intensity Correction Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Option 1 Desired Lantern Range Nautical Miles e Click the Intensity tab at the top of the Sealite Lantern Programmer e From the Intensity Selection box type in the desired lantern range nautical miles e Next select the Atmospheric Transmissivity level from the drop down field e Next select the Background Lighting Conditions lev
7. Operation tab of programmer Image 3 To program individual LED Specific characteristics see Image 8 e Click the LED Specific tab at the top of the Sealite Lantern Programmer From this page tab you will see a complete list of the 16 individual LEDs as well as their current flash code and intensity settings e Program LED Specific characteristics Flash Codes Intensities amp Sync Offsets as per instructions listed below Latest products and information available at www sealite com www sealite com Apollo 155 Long Range Lantern Adjustable from 4 12nm 1 Programming Individual LED Flash Codes In the Flash Code box type in the desired flash codes for each LED flash codes must be selected from the Sealite range available see Flash Code Reference List of this manual Fields that have not been specified will be set to 0 steady on Click the Set LED Flash Code button to send the new setup instruction to the lantern IMPORTANT to enable LED specific setup of Flash Codes the Advanced Operation Setting must be set to Sector or Complex Sector only See Advanced Operating Setting section of this manual for details Image 3 2 Programming Individual LED Intensities In the Intensity column type in the desired intensity for each LED intensities must be listed with a value of 0 to 100 indicating the pulse width modulation percentage see Intensity section of t
8. HEX SF F1 A1 15 31 2E 30 30 20 54 72 61 64 65 20 standby during the day 53 68 BF 77 46 F2 Lantern Version 1 00 Trade Show Acknoledge F HEX 42 3D 44 43 2C 20 54 3D 31 43 0D l HEX 8F F1 42 06 A8 F2 Request Lantern Name Advanced Operation Setting HEX 8F F1 42 19 53 65 61 BC 69 74 65 20 4C 61 GE em 74 65 72 GE 20 2D 20 31 14 F2 Lantern Name Advanced Operation Setting Rotating CCW Bank 1 Sealite Lantern 1 v Rotating Bank 1 CCW v Lantern Description Rotating Bank 1 Only amp nti Clackwise The lantern will rotate anti clockwise at full speed on the selected flash SL038 Rev1 1 00 Trade Show characteristic SLO3 Rev3 1 00 Trade Show SL038 Rev1 Master Board unknown software version Please contact Sealite for the latest version of the Sealite Lantern Programmer www sealite com au Existing Configuration Colour Green Operation Setting Dusk till Dawn Flash Code 000 Talbot Plateau Intensity 21 875 www sealite com au Image 3 Sealite Lantern Programmer Operation tab showing Operation Setting amp Advanced Operation Setting 4 3 Advanced Operation Settings The Apollo 155 comes standard with 16 ultra bright 3watt CREE LEDs and are available in a range of IALA recommended colours amp configurations eg sectored lights or rotating beacons CREE LEDs are leading the LED lighting revolution with their unprecedented lighting class brightness efficacy
9. 03 03 03 03 3 5 3 C FL 3 6S 05 10 05 10 05 25 2 B FL 2 1 6S 03 04 03 12 03 35 Latest products and information available at www sealite com www sealite com Apollo 155 Long Range Lantern Adjustable from 4 12nm SWITCH Oo 0103 0 o0modom ocumm gocooocOgocgooououom Uu OJ 00 00 00 OM 09 O GO 09 00 U N 09 09 00 M N gt UT 00 UJ oo NWN UW oon wnr UO RM o WITCH FLASH CODE ON OFF ON OFF ON OFF ON OFF MO m 0 0 OD DIN om A 0 08 U TN 0 mu BB nmn7000mM0 mM0 7 Z mnimmMMUUDULLDULLDLT08 FLASH CODE Q 3 6S FL 3 8S FL 3 9S FL 3 9S FL 3 10S FL 3 10S FL 3 10S FL 3 10S FL 3 10S FL 3 10S FL 2 1 10 S OC 3 10S JOE FL 2 1 10S FL 3 12S FL 3 12S FL 3 12S FL 3 12S FL 2 1 12S FL 2 1 12S FL 2 1 13 5 S FL 3 15S FL 3 15S FL 3 15S FL 2 1 15S FL 2 1 15S FL 2 1 15 S e Q 3 15S ioo FL 3 20 S FL 3 20 S FL 3 20 S VQ 4 4 S Q 4 6S Q 4 6S FL 4 10 S FL 4 10 S Q 4 10S FL 4 12 S FL 4 12 S FL 4 12 S FL 4 12 S Q 4 1285 1 0 0 5 5 0 0 3 0 5 0 5 0 5 0 8 1 0 0 8 1 0 1 0 0 3 0 3 0 3 0 4 0 5 0 8 0 3 0 3 0 5 0 5 0 8 0 3 0 5 1 0 1 5 0 5 0 3 0 5 0 5 1 5 0 5 0 5 0 5 0 7 1 0 1 0 1 2 0 7 0 6 0 5 1 5 0 6 1 0 0 7 1 0 0 7 0 5 1 5 2 0 1 2 1 0 1 2 1 0 1 0 1 7 1 0 1 5 0 3 0 5 0 7 2 0 0 5 3 0 1 5 1 2 1 0 0 3 0 7 0 6 1 0 1 2 0 7 1
10. 10S 03 07 03 07 03 07 03 07 03 57 E 8 FL 5 16 58 50 15 05 15 05 15 05 15 05 35 5 F FL 5 20S 05 05 05 05 05 05 05 05 05 155 9 F FL 5 208 08 12 08 12 o8 12 08 12 08 112 9 E FL 5 20S 10 10 10 10 10 10 10 10 10 11 0 SWITCH FLASH CODE ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF A B F D Q 6 10S 03 07 03 07 03 07 03 07 03 07 03 47 A F FL 6 15S 03 07 03 07 03 07 03 07 03 07 03 97 7 F FL 6 158 05 10 05 1 0 05 110 105 110 105 110 105 70 A E FL 6 LFL15S 05 110 105 10 105 110 05 110 105 110 05 170 SWITCH FLASH CODE VQ 6 LFL 10 S 0 2 03 02 03 02 03 02 03 02 03 02 03 20 50 VQ 6 LFL 10 S 0 3 0 3 0 3 03 0 3 0 3 0 3 0 3 0 3 0 3 0 3 0 3 2 0 4 4 Q 6 LFL 159 0 2 06 02 08 02 08 02 06 O2 08 02 08 20 79 Q 6 LFL 15 S 0 3 07 03 07 03 OF 0 2 07103 07 03107 20 70 Q 6 LFL 15 S 0605 06 06 06 06 06 06 06 06 06 06 20 58 VQ 6 LFL 15 S 0 3 0 3 03 06 3 03 03 03 0 3 03 03103 0 3 20 94 A B 6 E 7 E 2 E 2 E 3 E 8 F SWITCH FLASH CODE A B 4 E VQ 9 10 S 0 2 0 3 0 2 0 3 0 2 0 3 0 2 0 3 0 2 0 3 0 2 0 3 0 2 0 3 0 2 0 3 0 2 58 5 E VQ 9 109 031 0 3 03 03 03 03 03 03 03 03 03 03 03 03 03 03 03 49 1 F Q 9 15S 02 08 02 08 02 08 02 08 02 08 02 08 02 08 02 08 02 68 0 E Q 9 159 03 07 03 07 03 07 03 07 03
11. For example 0 5 seconds ON and 4 5 seconds OFF equals a 10 duty cycle Sealite recommends lantern flash setting to be set to the lowest duty cycle appropriate to the actual needs of the application For a complete list of Sealite Flash Codes available please refer to the Flash Code Reference List at the end of this manual 4 5 Custom Flash Codes If you cannot find the appropriate flash code from the Standard Flash Codes available the user may custom set the lantern to flash in any sequence required Any flash code characteristic up to 10 flashes with a total characteristic no longer than 10 minutes may be set To set a Custom Flash Code see Image 4 e Click the Flash Code tab at the top of the Sealite Lantern Programmer e From the Custom Flash Code Type A box type in ON time and OFF time timing information required in seconds listing available in up to 10 milliseconds 0 01 e Click the Set Flash Code button at the bottom of the page to send the new setup instruction to the lantern PLEASE NOTE when a custom flash code is programmed into the lantern the code will display as FFF Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm 4 6 Intensity Selection Using the Sealite Lantern Programmer Sealite lanterns may be set to a standard light intensity to meet installation requirements The desired intensity
12. K Paton 1 2 Power Requirement Update August 2010 K Paton 1 3 General Corrections December 2010 A Burns Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Introduction Congratulations By choosing to purchase the APOLLO 155 lantern you have become the owner of one of the most advanced LED marine lantern in the world Sealite Pty Ltd has been manufacturing marine lanterns for over 25 years and every care has been taken to ensure your lantern gives years of reliable service As a commitment to producing the highest quality products for our customers Sealite has been independently certified as complying with the requirements of ISO 9001 2000 quality management system for the design and manufacture of marine lanterns Sealite lanterns comply with the requirements of the US Coast Guard in 33 CFR part 66 for Private Aids To Navigation By taking a few moments to browse through this booklet you will become familiar with the versatility of your lantern and be able to maximise it s operating function Please remember to complete the Sealite warranty registration card accompanying your lantern Technology Sealite is the world s fastest growing manufacturer of marine aids to navigation We employ leading mechanical optical hardware amp software engineers to create innovative products to service the needs of our c
13. eye level Connecting the Lantern to the Computer e Plug the Bulgin connector end of the the programming cable into the lantern PC Programming Port and the serial port end of the cable into your computer serial communication port RS232 E PLEASE NOTE The programming cable provided is suitable for use with desktop PC s If you require connection to your notebook laptop a Serial Port to USB cable may need to be purchased 3 Establish the Programmer to Lantern Computer Connection COM Port Now that the lantern is connected to the computer and the Sealite Lantern Programmer software has been run the user must create the programmer to lantern connection The COM Port is the hardware port which the computer accesses when communicating with the lantern e From the Sealite Lantern Programmer select the appropriate COM Port from the drop down field at the top left of the menu page e Click the Open COM Port button to initiate the connection The Sealite Lantern Programmer will then attempt to connect interrogate the lantern Correct Connection Established If the connection is established data about the lantern configuration will appear under the headings Lantern Information amp Existing Configuration eg Lantern Colour Peak Intensity Operating Mode etc Connection NOT Established If the connection is not available the Sealite Lantern Programmer will not display any lantern specific information under the headings L
14. instructions provided to the customer by Sealite b the product has been deliberately abused or misused damaged by accident or neglect or in being transported or c the defect is due to the product being repaired or tampered with by anyone other than Sealite or authorised Sealite repair personnel Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm 3 The customer must give Sealite Pty Ltd notice of any defect with the product within 30 days of the customer becoming aware of the defect 4 Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced Typical battery replacement period is 3 4 years Long term exposure to high temperatures will shorten the battery life Batteries used or stored in a manner inconsistent with the manufacturer s specifications and instructions shall not be covered by this warranty 5 No modifications to the original specifications determined by Sealite shall be made without written approval of Sealite Pty Ltd 6 Sealite lights can be fitted with 3rd party power supplies and accessories but are covered by the 3rd party warranty terms and conditions 7 The product must be packed and returned to Sealite Pty Ltd by the customer at his or her sole expense Sealite Pty Ltd will pay return freight of its choice A returned product must be accompanied by a written description of the
15. the Apollo 155 e Connect the Apollo 155 to a 12v power supply or battery e For lanterns programmed to Dusk to Dawn operation setting cover lantern with a dark cloth or jack in darkness for more than 1 minute After this time the lantern will activate Next check that the lantern is flashing to the required flash code and intensity e Ifthe settings are correct disconnect from the 12v power supply or battery e Ifthe settings are incorrect following the Programming Instructions of this manual to re configure lantern characteristics and then re test prior to installation IMPORTANT when lantern is being programmed using the Sealite Lantern Programmer software it is recommended that the operation setting is set to Always On for ease of testing viewing new settings Once the programming is complete remember to change the operation mode back to your specific installation requirement Sealite recommend Dusk to Dawn mode Lantern Installation The Sealite Apollo 155 may be installed with connection to mains power or as a complete solar powered system available from Sealite IMPORTANT the Apollo 155 must be installed appropriately where the lantern is not blocked by buildings trees or other shadows that may affect the visibility of the lantern or the ambient light Option 1 Installation of Lantern to Mains Power To connect the Apollo 155 to a 12v DC power supply Connect the blue negavite wire of the lantern to the pow
16. 0 8 0 FL2 5S 03 22 C 1 FL7 5S 08 67 9 0 FL2 5S 05 20 E 5 FL8S 05 75 D 6 FL2 5S 10 15 B 4 FL8S 10 70 1 5 FL3S 02 28 6 2 ISO8S 40 40 A 0 FL3S 03 27 A 2 LFL8S 20 60 2 5 FL3S 04 26 6 6 OC8S 50 3 0 B 0 FL3S 05 25 B 2 LFL8S 30 50 3 5 FL3S 06 24 F 5 FL9S 09 841 C 0 FL3S 07 23 C 4 FL9S 10 80 D 0 FL3S 1 0 26 7 6 OC9S 6 0 30 2 2 ISO3S 1 5 1 5 0 6 FL10S 02 98 5 4 OC3S 20 1 0 1 6 FL10S 03 97 E 2106389 25 05 D 1 FL10S 05 95 4 6 OC3 58 25 10 2 6 FL10S 08 92 4 5 FL4S D2 33 E 1 FL10S 10 90 5 5 FL4S 03 37 1 4 FL10S 15 8 5 E 0 FL4S 04 36 2 LFL10S 20 80 F 0 FL4S 05 35 D 2 LFL10S 30 70 6 5 FL4S 06 34 7 2 IS010S 50 50 0 1 FL4S 08 32 2 4 LFL10S 40 60 1 1 FL4S 10 30 8 6 OC40S 60 40 2 1 FL4S 1 5 25 5 3 OC10S 7 0 30 3 2 ISO4S 20 20 6 3 OC10S 75 25 3 6 OCA4S 25 15 F 1 FL12S 1 2 10 8 F 2 0C4S 30 10 D 4 FL128 25 95 3 1 FL43S 191 30 3 4 LFL 128 20 10 0 8 5 FL5S 02 48 0 2 FL15S 1 0 14 0 4 1 FL5S 03 47 4 4 LFL15S 40 110 5 1 FL5S 05 45 7 4 OC15S 10 50 9 5 FL5S 09 4 1 A 6 LFL20S 20 180 6 1 FL5S 10 40 E 4 FL26S 1 0 250 Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm SWITCH FLASH CODE ON OFF ON OFF A B 0 A FL 2 4S 05 1 0 05 20 E B VQ 24S 02 10 02 26 1 A FL 2 4 58 03 10 03 29 2 A FL 2 4 58 04 10 04 27 3 A FL 2 4 58 05 1 0 05 25 F 9 FL 25S 02 08 0
17. 00 50 77 Fat Flash Code i Intensity Image 8 Sealite Lantern Programmer LED Specific tab showing Flash Code Intensity amp Sync Offset Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm 5 Finalising the Lantern Programming Now that you have programmed your Apollo 155 lantern it is important that you change the Operation Setting back to the desired setting required at the start of this manual Sealite recommended that all programming of the lantern be performed with the Operation Setting of Always On for ease of testing of each selected setting To program the lantern operation setting Click the Operation tab at the top of the Sealite Lantern Programmer e From the Operation Setting box select the desired lantern operation setting from the drop down field e Once selected from the drop down field the lantern will automatically send the setup instruction to the lantern eg lantern will automatically change setup PLEASE NOTE to test lantern setting for Dusk to Dawn mode cover the lantern with a dark cloth jacket for approximately 1min The lantern will then begin flashing to the
18. 07 03 07 03 07 03 07 03 6 7 1 E Q 9 158 0 6 0 6 06 06 06 06 06 06 06 06 06 06 06 06 06 06 06 48 SWITCH FLASH CODE ON OFF ON OFF ON OFF ON OFF A B MORSE T _ INDICATES LETTER 7 38 O A 6S 03 06 10 41 7 B O A 8S 04 06 20 50 8 8 O A 8S 08 12 24 36 B 8 O U 40S 03 0 7 0 3 07 09 7 1 C 8 O U 40S 04 06 04 06 12 68 D 8 O U 40S 05 05 05 05 15 65 9 8 O A 10 S 05 05 15 75 8 9 O D 40S 50 10 10 10 10 10 8 O A 158 05 15 20 110 F 8 O U 45S 06 03 06 03 14 118 o l9 O U 45S 07 05 07 05 19 107 1 19 O U 158 0 7 0 7 0 7 07 24 10 1 7 D O B 15S 15 05 05 05 05 05 05 10 5 Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Maintenance and Servicing Designed to be virtually maintenance free the Apollo 155 will require minimal attention However the following maintenance and servicing information is provided to help ensure the life of your Sealite product 1 Cleaning Lens occasional cleaning of the lantern lens may be required Using a cloth and warm soapy water wipe off any foreign matter before rinsing the lens with fresh water 2 Ensure the cooling fins of the aluminium extrusion are clean and free from foreign material that may reduce the cooling efficiency of the extrusion 3 Ensure the external vent and programming port are free from foreign material Latest products and inf
19. 1 80 Lantern Description SLO39 Rev1 1 00 Trade Show SL037 Rev3 1 00 Trade Show Custom Flash Code Type B Al LEDs SLO39 Rev Master Board unknown software version Selected LED Please contact Sealite for the latest version of the Sealite Ti Lantern Programmer D www sealite com au PWM Existing Configuration Colour Green Operation Setting Dusk till Dawn Flash Code 000 Talbot Plateau Intensity 21 875 S e a Ite Flash Code Information Set Flash Code www sealite com au Image 4 Sealite Lantern Programmer Flash Code tab showing IALA Flash Characteristic Selection Sealite Flash Characteristic Selection amp Custom Flash Codes Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Option 1 IALA Flash Characteristic Selection Click the Flash Code tab at the top of the Sealite Lantern Programmer From the IALA Flash Characteristic Selection box select the desired IALA flash characteristic class from the drop down field Eg FL Next select the desired flash timing interval from the subclass drop down field Eg FL 2 S w
20. 2 38 2 C FL 2 5S 02 12 02 34 4 A FL 2 5S 04 06 04 36 0 7 FL 2 5S 05 10 05 30 1 7 FL 2 5S 10 10 10 20 9 B Q 25S 03 o7 03 37 2 9 Q 25S 05 05 05 3 5 5 A FL 2 5 58 04 14 04 33 7 8 FL 2 6S 03 06 10 44 A A FL 2 6S 03 09 03 45 6 A FL 2 6S 03 10 03 44 7 A FL 2 6S 04 10 04 42 9 9 FL 2 6S 05 10 05 4 0 2 8 FL 2 6S 08 12 08 32 3 7 FL 2 6S 10 1 0 1 0 30 3 9 Q 2 6S 03 07 03 47 A 9 FL 27S 10 140 10 4 0 7 B FL 28S 04 06 20 50 8 A FL 2 8S 04 10 04 62 4 7 FL 2 8S 05 1 0 05 60 8 8 FL 28S 08 12 24 3 6 5 7 FL 2 8S 10 1 0 10 50 4 C OC 28S 30 20 10 20 5 C OC 2 8 S 50 10 10 1 0 F B VQ 28S 02 10 02 66 9 A FL 2 108 04 16 04 76 9 8 FL 2 10S 05 05 15 7 5 6 7 FL 2 10S 05 10 05 80 7 7 FL 2 10S 05 15 05 7 5 6 9 FL 2 10S 05 20 05 7 0 8 7 FL 2 10S 08 12 08 7 2 B 9 FL 2 10S 10 1 0 1 0 7 0 9 7 FL 2 10S 10 15 10 65 4 9 Q 2 10S 06 04 06 84 B A FL 2 128 04 10 04 102 C 9 FL 2 12S 05 10 05 10 0 D 9 FL 2 12S 15 20 15 7 0 A 8 FL 2 15S 05 15 20 110 A 7 FL 2 15S 10 20 10 110 8 B Q 2 15S 02 08 02 13 8 e A FL 2 20S 10 30 10 150 D A FL 2 25S 10 10 10 220 SWITCH FLASH CODE ON OFF ON OFF ON OFF A B 7 9 Q 3 5S 05 05 05 05 05 25 5 9 VQ 3 5S 02 03 02 03 02 38 0 C VvQ 3 5S 03 02 03 02 03 37 E 9 VQ 3 5S 03
21. 2C 20 54 3D 32 41 HEX 42 3D 44 33 2C 20 54 3D 32 41 Lantern Description 5L033 Rev 1 00 Trade Show SL037 Rev3 1 00 Trade Show SL039 Rev1 Master Board unknown software version Please contact Sealite for the latest version of the Sealite Lantern Programmer www sealite com au Existing Configuration Colour Green Operation Setting Always On Flash Code 000 Sector Talbot Plateau Intensity 50 000 Sector www sealite com au LED 1 Sector 1 Code 000 Intensity 50 000 LED 2 Sector 1 Code 051 Intensity 100 000 LED 3 Sector 1 Code 000 Intensity 50 000 LED 4 Sector 1 Code 051 Intensity 100 000 LED 5 Sector 1 Code 000 Intensity 50 000 LED 6 Sector 1 Code 000 Intensity 0 000 LED 7 Sector 1 Code 000 Intensity 0 000 LED 8 Sector 1 Code 000 Intensity 100 000 LED 9 Sector 1 Code 000 Intensity 50 000 LED 10 Sector 1 Code 000 Intensity 100 000 LED 11 Sector 1 Code 000 Intensity 50 000 LED 12 Sector 1 Code 000 Intensity 100 000 LED 13 Sector 1 Code 000 Intensity 50 000 LED 14 Sector 1 Code 000 Intensity 100 000 LED 15 Sector 1 Code 000 Intensity 50 000 LED 16 Sector 1 Code 000 Intensity 100 000 EE Information Operation Flash Code Intensity Sensor Sync Pulse LED Specific Flash Code Intensity 00 50 51 100 00 50 51 100
22. 7 0 5 1 5 1 2 0 7 1 5 1 0 0 5 1 5 3 0 1 5 1 5 1 5 0 5 0 5 0 5 ON OFF 0 3 0 7 0 5 1 0 0 3 1 0 0 8 1 2 0 3 0 7 0 4 0 6 0 5 0 5 0 5 1 5 0 6 0 6 1 0 1 0 0 5 2 1 1 0 1 0 0 3 0 7 0 5 0 5 0 5 1 5 0 5 2 0 0 8 1 2 1 0 3 0 0 8 2 4 1 0 4 0 1 0 4 0 0 3 1 7 0 4 1 0 0 5 1 5 0 6 0 3 0 7 0 5 0 7 0 7 1 0 5 0 0 1 0 5 0 5 3 0 0 5 1 5 0 8 1 2 1 0 1 0 0 3 0 3 0 3 0 7 0 4 0 6 0 5 1 0 0 8 1 2 0 3 0 7 0 3 1 7 0 5 0 5 0 5 1 5 0 8 1 2 0 3 0 7 0 5 1 5 1 0 1 0 0 5 0 5 0 5 1 5 0 3 3 0 0 5 1 5 0 5 1 5 1 5 1 5 0 5 0 5 0 5 0 5 0 5 0 5 0 3 0 3 0 4 0 5 0 8 0 3 0 3 0 5 0 5 0 8 0 3 0 5 1 0 0 5 0 5 0 3 0 5 0 5 1 5 0 5 0 5 0 5 3 7 4 5 6 1 4 2 re 6 8 75 5 5 7 0 5 0 5 7 1 0 T T 6 5 7 5 6 5 1 2 5 0 6 0 4 0 5 5 10 7 11 8 10 5 11 8 10 7 10 1 5 0 13 7 12 5 15 5 15 2 15 0 0 3 0 7 0 6 1 0 1 2 0 7 Taf 0 5 1 5 1 2 0 7 1 5 1 0 0 5 1 5 3 0 1 5 4 5 1 5 0 5 0 5 0 5 0 3 0 3 0 4 0 5 0 8 0 3 0 3 0 5 0 5 0 8 0 3 0 5 1 0 0 5 0 5 0 3 0 5 0 5 1 5 0 5 0 5 0 5 2 3 2 7 2 6 5 0 3 2 6 7 5 7 8 5 5 5 5 2 8 7 8 5 8 0 10 5 9 5 9 8 13 5 10 5 9 5 16 5 24 5 26 5 Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm SWITCH FLASH CODE ON OFF ON OFF ON OFF ON OFF ON OFF A B D D Q 57S 03 07 03 07 03 07 03 07 03 27 E D Q 5
23. 83 Up to 12 years M091133 1809001 2000 IP68 Australian Provisional Patent 1004289015 SEALITE is a registered trademark of Sealite Pty Ltd Full 3 years Rotating beacon e Sectored light Wreck marking light e 2 5 or 10 degree lens Specifications subject to change or variation without notice Subject to standard terms and conditions A Intensity setting subject to solar availability T Higher outputs at increased current draw Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Product Components The following components come standard with each lantern Apollo 155 lantern USB drive loaded with lantern programming software amp other important information Programming cable to connect the lantern to your computer via serial port comm port Installation amp service manual Warranty registration card These components are securely packaged within foam in a carton and shipped to you PLEASE NOTE The programming cable provided is suitable for use with PC s If you require connection to your notebook laptop a Serial Port to USB cable may need to be purchased Please check that ALL of these components are included with your order and contact your Sealite representative as soon as possible if anything is missing Latest products and information available at www sealite com Sealite Apollo 155 www sealite
24. OTE advanced operation settings not supported will NOT display in the selection list available 4 4 Standard Flash Codes Using the Sealite Lantern Programmer Sealite lanterns may be set to any of up to 304 pre defined standard flash codes including a complete range of IALA recommended flash codes The flash code may be programmed by selecting from the IALA Flash Characteristic range or by typing in the specific Sealite Flash Characteristic setting see Image 4 Sealite Lantern Programmer 1 0 0 2 4 9 COM Port Selection Information Operation Flash Code Intensity Sensor Sync Pulse LED Specific LIII 1 Se eigd IALA Flash Characteristic Selection Close COM Port FL Flashing vi TAE 8F F1 44 07 12 C3 F2 Advanced Operation Mode A rotating CCW Bank 1 a Acknoledge F4 E HEX 8F F1 45 07 04 BO F2 Request Lantern Colour Peaklntensty z Ae a 5t 2 0A 04 07 05 78 37 F2 Lantern Colour Sealite Flash Characteristic Selection Peak Intensity Colour Green 20 Searching for 520 in Sealite Flash Codes Peak Intensity 1400 candela Found 20 180 Acknoledge F4 HEX 42 3D 44 42 2C 20 54 3D 31 43 0D HEX SF F1 A3 DB AF F2 Request ESO Tte Custom Flash Code Type Timing Information 20 02 1 8 HEX 8F F1 3 07 07 B7 F2 Intensity 21 875 PK PE M On Time 0 20 Off Time
25. antern Information amp Existing Configuration eg Lantern Colour If this error occurs please check the following e Reconnect the lantern to the computer e Check that the lantern power supply has sufficient charge eg battery is charged and then reconnect it to the lantern e Re run the Sealite Lantern Programmer The connection should now become established The Sealite lantern is now ready to be programmed to your specific requirements Latest products and information available at www sealite com Apollo 155 Long Range Lantern Adjustable from 4 12nm www sealite com Sealite Lantern Programmer 1 0 0 2 COM Port Selection COM1 COM1 Open Close COM Port Setting HEX 8F F1 AA 07 12 C3 F2 Advanced Operation Mode Rotating CCW Bank 1 amp cknoledae F4 HEX 8F F1 CA 07 12 E3F2 Write Advanced peration Setting HEX 8F F1 45 07 04 BO F2 Request Lantern Colour Peak Intensity HEX 8F F1 45 0A 04 07 05 78 37 F2 Lantern Colour Peak Intensity Colour Green Peak Intensity 1400 candela Acknoledae F4 Acknoledae F Lantern Description SLO39 Rev1 1 00 Trade Show SLO3 Rev3 1 00 Trade Show SL038 Rev1 Master Board unknown software version Please contact Sealite for the latest version of the Sealite Lantern Programmer mann sealite com au Existing Configuration Colour Green Operation Setting Flash Code 000 Talbot Plateau Intensity 21 875 www sea
26. autonomy in normal operating conditions with duty cycles up to approximately 3096 In applications whereby duty cycles exceed this limit a reduction in lantern intensity is recommended Please contact a Sealite consultant if assistance is required Recommended Rhythm for Flashing Light IALA Regions A and B MARK DESCRIPTION RHYTHM Very quick 3 every 5 seconds or quick 3 every 10 seconds Very quick 6 long flash every 10 seconds or quick 6 long flash every 15 seconds Very quick 9 every 10 seconds or quick 9 every 15 seconds Latest products and information available at www sealite com SWITCH FLASH CODE ON OFF SWITCH FLASH CODE ON OFF A B A B 0 0 F Steady light 7 1 FL5S 15 35 D 3 VQ05S 02 03 4 2 ISO5S 25 25 E 3 VQ06S 02 04 8 2 LFL5S 20 30 F 3 VQ06S 03 03 0 3 OC5S 30 2 0 7 3 Q1S 02 08 1 3 OC5S 40 10 8 3 Q1S 03 07 2 3 OC5S 45 05 9 3 Q1S 04 06 C 6 FL6S 02 58 A 3 918 05 0 5 B 5 FL6S 03 57 8 4 Q1S 08 02 C 5 FL6S 04 56 B 3 Q12S 03 09 8 1 FL6S 05 55 9 4 Q12S 05 07 9 1 FL6S 06 54 C 3 Q12S 06 06 A 1 FL6S 1 0 50 F 4 FL15S 62 43 7 5 FL6S 12 48 1 0 FL1 5S 03 12 B 1 FL6S 1 5 45 0 5 FL1 5S 04 14 5 2 ISO6S 30 30 0 4 FL15S 05 10 9 2 LFL6S 20 40 2 0 FL2S 02 18 6 4 OC6S 40 20 3 0 FL2S 03 17 3 3 OC6S 45 15 4 0 FL2S 04 16 4 3 OC6S 50 10 5 0 FL2S 05 15 A 4 FL7S 10 60 6 0 FL2S 0 7 13 9 6 FL7S 20 5 0 7 0 FL2S 08 12 5 6 OC7S 45 25 1 2 ISO2S 10 10 D 5 FL7 5S 05 7
27. ays clean and free from bird droppings and shade and that the solar array it pointed toward the sun to maximise solar collection e Please ensure that battery box covers are latched properly and that cages are secured appropriately to prevent theft and vandalism Please contact your Sealite representative if you have any questions regarding the installation and service of the lantern Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Flash Code Reference List SEALITE code reference is listed by number of flashes For the latest version of this document check http www sealite com Email support sealite com Symbols FL Flash followed by number Eg FL 1 S one flash every second F Fixed Q Quick flash VQ Very quick flash OC Occulting greater period on than off ISO Isophase equal period on and off LFL Long flash long MO Morse code contains letter For example VQ 6 LFL 10 S means 6 very quick flashes followed by a long flash during a 10 second interval The amount of power your lantern draws through the night depends on the duty cycle i e the amount of time on as a proportion to the timing cycle For example 0 5 seconds on and 4 5 seconds off equals a 10 duty cycle It is best to operate at the lowest duty cycle appropriate to the actual needs of the application Please note Sealite models will retain full
28. battery box a Open the battery box cage door and place the battery case Ref 3 1 into the cage with the hinge of the case adjacent to the hinge of the cage b Open the battery case and lower the battery into the case ensuring the battery terminals are upright c Insert one bolt Ref 3 3 with a washer Ref 3 4 under the head through each of the battery terminals Place the red eye connector over the tail of the bolt protruding through the red battery terminal e Fit a washer Ref 3 4 spring washer Ref 3 5 and nut Ref 3 6 on the terminal bolt Tighten f Place the blue eye connector over the tail of the bolt protruding through the black battery terminal Fit a washer Ref 3 4 spring washer Ref 3 5 and nut Ref 3 6 on the terminal bolt Tighten g Insert the end of the cable from the solar panel through one of the cable glands in the back of the battery case Join bullet connectors red to red and blue to blue e Test the lantern Cover the lantern completely to resemble night time Allow 60 seconds for the lantern to activate e Uncover the lantern and it will turn off after 60 seconds Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Ref No Description No Required 31 Battery Case SPC353534 1 3 2 Battery 12V 70AH or equivalent 3 0 Bolt battery 3 4 Washer battery 35 Spring Washer battery 3 6 Nut battery
29. com Long Range Lantern Adjustable from 4 12nm Programming Instructions The Apollo 155 lantern is available in a variety of LED colours single or multiple colours and sectors to meet a range of installation and regulatory requirements The LED colour s are set within each lantern when manufactured and then the lantern is pre programmed to the customer s specific requirements for convenience eg flash amp intensity setting sectors etc The Apollo 155 is an extremely intelligent lantern with a number of features which can be programmed directly via a user friendly computer program as supplied on USB drive with every lantern The specific setup of your lantern will determine which features are programmable To change update the settings of your lantern please read the following instructions 1 Run the Programming Software The programming software Sealite Lantern Programmer may be run directly from the USB drive provided or you may copy the software to your computer hard drive for future use Running the Programming Software from the USB Drive e Connect the USB drive to your computer e Navigate to the USB drive folder amp double click the file called Sealite Lantern Programmer A new window will appear displaying the Sealite Lantern Programmer Saving the Programming Software to Computer Hard Drive e Connect the USB drive to your computer e Navigate to the USB drive folder e Right mouse click the file called Sea
30. ctral distribution as a flashing light which would have the same luminous range as a flashing light under identical conditions of observation Sealite has provided you with the most common methods for effective intensity adjustment as follows e Schmidt Clausen e Allard e Blondel Rey Douglas e Allard Ohno Couzin PLEASE NOTE the lantern Effective Intensity Correction is set to None as default No effective intensity correction will therefore be applied to the lantern setting To program the lantern Effective Intensity Correction see Image 5 e Click the Intensity tab at the top of the Sealite Lantern Programmer e From the Effective Intensity Correction box select the desired lantern effective intensity correction mode from the list available e Click the Set Intensity button to send the new setup instruction to the lantern For more information about intensity settings and effective intensity correction methods please review IALA Recommendation E 200 Part 4 Contact Sealite today for an electronic version Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm 4 8 Light Sensor For lanterns set to the Dusk to Dawn operation setting the user may program specific ambient light levels Lux levels to suit their installation The ambient light threshold determines when the lantern will turn ON in the evening and OFF in the
31. defect and a photocopy of the original purchase receipt This receipt must clearly list model and serial number the date of purchase the name and address of the purchaser and authorised dealer and the price paid by the purchaser On receipt of the product Sealite Pty Ltd will assess the product and advise the customer as to whether the claimed defect is covered by this warranty 8 Sealite Pty Ltd reserves the right to modify the design of any product without obligation to purchasers of previously manufactured products and to change the prices or specifications of any product without notice or obligation to any person Input voltage shall not exceed those recommended for the product 10 Warranty does not cover damage caused by the incorrect replacement of battery in solar lantern models 11 This warranty does not cover any damage or defect caused to any product as a result of water flooding or any other acts of nature Limitation of Liability To the extent permitted by section 68A of the Trade Practices Act 1974 Cth the liability of Sealite Pty Ltd under this Warranty will be at the option of Sealite Pty Ltd limited to either the replacement or repair of any defective product covered by this Warranty Limited to Original Purchaser This Warranty is for the sole benefit of the original purchaser of the covered product and shall not extend to any subsequent purchaser of the product Miscellaneous Apart from the specific warranties pr
32. durable timber or other durable material e Recommended minimum post size is 150mm x 150mm or larger if the battery box cage needs to be installed immediately beneath the solar panel e The length of post required is the sum of exposed length normally 1 25m plus the required depth into the ground which is dependent on local soil conditions recommended depth 850 minimum e The faces of the post must be aligned with the cardinal points of the compass This will allow the Solar panel to be aligned with the equator and sun e The post should not be more than 20m from the lantern and should not be located so as to place the solar panel in shade for a significant time e The solar panel is tempered glass so the post should be located away from any objects which might fall on the installation e The post and equipment footprint should be at least 300mm clear of any shading under all conditions Envelope Envelope Solar Panel Side Elevation Figure 1 Panel amp Cage Footprint Latest products and information available at www sealite com www sealite com Apollo 155 Long Range Lantern Adjustable from 4 12nm Description 2 1 140W Solar Panel amp Frame No Required 1 2 2 Battery Box Cage 1 2 3 Post 150x150 minimum Client Supplied 2 4 Steel Support 1 2 5 Steel Brace 1 2 6 Screw 12mm x 75 12 2 7 Washer 12mm 12 2 8 Bolt 10mm x 25
33. e configured using a simple user friendly computer program Latest products and information available at www sealite com www sealite com Apollo 155 Long Range Lantern Adjustable from 4 12nm SPECIFICATIONS Light Characteristics Light Source Available Colours Available Intensity at 28 watts cd A T Visible Range nm Horizontal Output degrees Vertical Divergence degrees Available Flash Characteristics Intensity Adjustments LED Life Expectancy hours Electrical Characteristics Current Draw mA Circuit Protection Nominal Voltage v Temperature Range Physical Characteristics Body Material Lens Material Lens Diameter mm inches Lens Design Mounting Height mm inches Width mm inches Mass kg Ibs Product Life Expectancy Certifications CE Quality Assurance Waterproof Intellectual Property Patents Trademarks Warranty Options Available 16 ultra bright 3watt CREE LEDs Red Green White Yellow Blue Red 880 Green 1380 White 2100 Yellow 630 4 12 0 360 5 as standard gt 256 IALA recommended PC programmed 32 levels PC programmed gt 100 000 Refer to Sealite Power Calculator Polarity protected 12v DC 40 to 80 C Anodised 6060 Series Aluminium LEXAN Polycarbonate UV stabilised 155 6 s Sealite 16 segment multi focus LED lens patent pending 3 amp 4 hole bolt pattern on 200mm OD base 255 10 235 91 3 3 8
34. e lantern Temperature Thresholds see Image 6 e Click the Sensor tab at the top of the Sealite Lantern Programmer e From the Temperature Sensor box type in the desired hot amp recovery thresholds in degrees Celsius e Click the Set Temperature Sensor button to send the new setup instruction to the lantern Latest products and information available at www sealite com www sealite com Apollo 155 Long Range Lantern Adjustable from 4 12nm amp Sealite Lantern Programmer 1 0 0 2 COM Port Selection Information Operation Flash Code Intensity mt COM1 Light Sensor Value COM1 Open Close COM Port 45 2C 20 54 3D 32 35 0D A Dusk 04 HEX 8F F1 46 06 AC F2 Request Lantern Features HEX 8F F1 A6 09 F7 FF E3 88 F2 Feature List Perne Wy Sync Pulse LED Specific Set Light Sensor 6 or ctorEx tite Battery Cutoff rite Temperature Compensation rite Lux Levels spare 00 Value Read Write Operation Mode Read Write Intensity Flat 10 47 Volts Read Write Effective Intensity Battery Sensor Low 11 47 Volts Lantern Description SLO39 Rev1 SLO3 Rev3 Recovery 11 95 Volts 1 00 Trade Show 1 00 Trade Show SLO39 Rev1 Master Board unknown software version Please contact Sealite for the latest version of the Sealite Lantem Programmer man sealite com au Temperature Sensor Value Hot 70 0 C Exist
35. el from the drop down field for standard marine applications select Night No Background Lighting e Once selections entered made the lantern will automatically send the setup instruction to the lantern eg lantern will automatically change setup Option 2 Desired Lantern Intensity Candela e Click the Intensity tab at the top of the Sealite Lantern Programmer e From the Intensity Selection box type in the desired lantern intensity candela e Once selections entered the lantern will automatically send the setup instruction to the lantern eg lantern will automatically change setup Option 3 Direct Pulse Width Modulation PWM Value e Click the Intensity tab at the top of the Sealite Lantern Programmer e From the Intensity Selection box either type in the desired pulse width modulation value 96 into the field OR move the horizontal scroll bar to the desired PWM Once selections entered made the lantern will automatically send the setup instruction to the lantern eg lantern will automatically change setup For more information about intensity settings please review IALA Recommendation E 200 Part 2 Contact Sealite today for an electronic version 4 7 Effective Intensity Correction Depending on the flash code selected the effective intensity may be adjusted As per IALA Recommendation E 200 Part 4 effective intensity is defined as The luminous intensity of a fixed continuous light of the same relative spe
36. ending in Canada United Kingdom and Europe Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Apollo 155 Model The Apollo 155 is the next generation in marine aids to navigation To utilise the latest technology Sealite has designed a lantern using 16 of the world s most advanced LEDs These highly efficient LEDs can be configured individually to create not just a flashing lantern but also a sectored lantern rotating lantern and even more complex sectors with multiple flash codes in the same lantern The Apollo 155 has an advanced thermal management system incorporating a custom designed extrusion which is used as a heat sink for the 16x LEDs The lens of the Apollo 155 has 32 optical elements controlling the light emissions from the LED in a two dimension way This is unique to the industry There are 16x LEDs in each lens with each covering 45 horizontally and either 2 5 5 or 10 vertically The lens and LED holder can be designed for sectoring different LEDs to 1 increments E g 183 degrees red 42 degrees white and 15 degrees red in one tier Like all Sealite marine lanterns the Apollo 155 has a specifically designed circuit board that controls automatic dusk to dawn operation LED operation and many functions that can be specifically requested such as current monitoring GSM GPS or radio control The lantern can b
37. er supply negative termainal e Connect the brown positive wire of the lantern to the power supply positive terminal IMPORTANT it is important that a 15Amp AC DC power supply is connected between the mains power and the lantern to maximise the life of your product The AC DC power supply should be no more that 20m from the lantern Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Option 2 Installation of Lantern to Solar Powered System Sealite has an optional complete solar powered system available to purchase with the standard Apollo 155 lantern Detailed instructions for installation of the solar system are listed as follows 1 Unpacking Instructions Unpack all hardware and verify container contents in accordance with Figure 2 Please contact your Sealite representative if there is any hardware missing 2 Initial Inspection Inspect all hardware for damage If there is any damage please contact your Sealite representative 3 Installation Refer to Figure 1 Panel amp Cage Footprint and Figure 2 Installation of Solar Panel amp Battery Box Cage during installation of the panel and cage 3 1 Installing the Post A suitable mounting point for the Solar Panel and Battery Box Cage is to be provided by the client It is usual to use a purpose installed post The following should be observed e The post should be of a
38. fferent tab sections of the Sealite Lantern Programmer ensure that you click the SET button of the feature before moving to the next tab The programmer will automatically gather request information form the lantern on occasion Please be aware that slight page update delays may occur when the programmer is refreshing the information on the screen 4 1 Naming the Lantern The user can allocate a specific name for each lantern for ease of recognition when programming Eg Sealite Lantern 01 North Cardinal 1 etc see Image 2 This name may be up to 44 characters in length To program the lantern name see Image 2 e Click the Information tab at the top of the Sealite Lantern Programmer e From the Lantern Name box type in the name you wish to allocate to the lantern e Click the Set Name button e The lantern name will appear above where you typed the new name 4 2 Operation Setting The user may select the operation setting in which they would like the lantern to be set see Image 3 Options include Standby The lantern is still with power but will not flash the selected flash code this mode is NOT suitable for long term storage Always On The lantern is active and will always flash the selected flash code day and night The lantern will only turn off when the battery is flat Dusk to Dawn The lantern will be active and flash the selected flash code only at night During daylight hours the lantern will be in standby
39. his manual for details Fields that have not been specified will be set to 0 0 intensity OFF Click the Set LED Intensity button to send the new setup instruction to the lantern IMPORTANT to enable LED specific setup of Intensities the Advanced Operation Setting must be set to Sector or Complex Sector only See Advanced Operating Setting section of this manual for details Image 3 3 Programming Individual LED Sync Offsets In the Sync Offset column type in the desired synchronisation offset values for each LED sync offset values must be listed in seconds Fields that have not been specified will be set to O 0 second offset Click the Set LED Sync Offset button to send the new setup instruction to the lantern IMPORTANT to enable LED specific setup with Sync Offset the Advanced Operation Settings must be set to Complex Sector only See Advanced Operating Settings section of this manual for details COM Port Selection Sealite Lantern Programmer 1 0 0 2 COM1 Open Close COM Port r Version HEX 8F F1 41 15 31 2E 30 30 20 54 7261646520 pa 3 68 BF 77 46 F2 Lantern Version 1 00 Trade E Acknoledge F4 HEX 8F F1 42 06 A8 F2 Request Lantern Name HEX 8F F1 42 19 53 65 61 BC 69 74 65 20 4C 61 BE 7465 72 BE 20 2D 20 31 14 F2 Lantern Name Sealite Lantem 1 Acknoledge F HEX 42 3D 44 33 2C 20 54 3D 32 39 HEX 42 3D 44 33 2C 20 54 3D 32 39 HEX 42 3D 44 33
40. ill set the lantern to flash ON amp then OFF once within a 2sec interval Next select the specific ON amp OFF flash timing setting from the drop down field Eg 20 0 2 1 8 will set the lantern to flash for 0 2sec ON amp 1 8sec OFF Click the Set Flash Code button at the bottom of the page to send the new setup instruction to the lantern PLEASE NOTE when selecting the IALA Flash Characteristic fields in the Sealite Flash Characteristic amp Custom Flash Code fields below will populate with the particular information Once set information about the selected flash code will also be updated in the Existing Configuration box IALA Flash Code Symbols FL F Q VQ OC ISO LFL MO For Flash followed by number Eg FL 1 S represents one flash every second Fixed Quick flash Very quick flash Occulting greater period ON than OFF Isophase equal period ON and OFF Long flash long Morse code contains letter example VQ 6 LFL 10 S represents 6 very quick flashes followed by a long flash during a 10 second interval Recommended Rhythm for Flashing Light IALA Regions A and B MARK DESCRIPTION RHYTHM Port Hand amp Starboard Marks Any other than Composite Group Flashing 2 1 Preferred Channel Starboard Composite Group Flashing 2 1 Preferred Channel Port Composite Group Flashing 2 1 North Cardinal Mark Very quick or quick East Cardinal Mark Very quick 3 every 5 seconds or quic
41. ing Configuration Recovery 59 6 C Colour Green Operation Setting Always On Flash Code 000 Talbot Plateau Intensity 100 000 High Sealite www sealite com au Image 6 Sealite Lantern Programmer Sensor tab showing Light Sensor Battery Sensor amp Temperature Sensor Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm 4 11 Pulse Shape Pulse Shape is an advanced user option which enables the lantern to be programmed to achive a variety of lighting effects These effects are created by changing the rise leading edge and fall trailing edge timing of each LED Eg a slow linear leading edge and slow linear trailing edge give the light more of a glow the way incandescent lighting technology displays The Leading Edge and a Trailing Edge of the lantern LEDs may be programmed with a different pulse shape eg square leading edge amp linear trailing edge including Square standard OFF to ON in 1 count 1 count 9 6 milliseconds Linear Very Fast smoothes OFF to ON of each individual LED by 8 intensity level per count Linear Fast smoothes OFF to ON of each individual LED by 4 intensity level per count Linear Normal smoothes OFF to ON of each individual LED by 2 intensity level per count Linear Slow smoothes OFF to ON of each individual LED by 1 inte
42. k marking lights Standard Flash Codes up to 304 pre defined codes available o IALA Flash Characteristic Selection O Sealite Flash Characteristic Selection Custom Flash Codes set the lantern to your exact flash requirements Intensity Selection o Range nm o Candela cd o Pulse Width Modulation PWM Talbot Plateau Intensity Effective Intensity Correction o Schmidt Clausen o Allard o Blondel Rey Douglas o Allard Ohno Couzin Lantern Sensor Thresholds o Ambient Light Threshold Lux Level select the ambient light levels for lanterns set to Dusk to Dawn mode o Low Battery Sensor select the battery voltage thresholds o Temperature Threshold select the internal lantern temperature levels in which the lantern will automatically reduce it s intensity Pulse Shape select the way the light displays eg soft glow of incandescent o Leading Edge o Trailing Edge LED Specific Programming for advanced users configure each individual LED to suit your specific requirements o Flash Code o Intensity o Sync Offset The following information describes in detail how to customise control each of the above lantern programming options Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm IMPORTANT the programmer will only send update certain lantern features when the user clicks the relevant SET button Eg When navigating between di
43. k 3 every 10 seconds South Cardinal Mark Very quick 6 long flash every 10 seconds or quick 6 long flash every 15 seconds West Cardinal Mark Very quick 9 every 10 seconds or quick 9 every 15 seconds Isolated Danger Mark Group flashing 2 Safe Water Mark Isophase occulting one long flash every 10 seconds or Morse Code A Special Marks Any other than those described for Cardinal Isolated Danger or Safe Water Marks Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Option 2 Sealite Flash Characteristic Selection e Click the Flash Code tab at the top of the Sealite Lantern Programmer e From the Sealite Flash Characteristic Selection box type in the desired Sealite flash code reference Eg 51 this code may be up to 3 hexadecimal characters eg 0 to 9 and A to F e Click the Set Flash Code button at the bottom of the page to send the new setup instruction to the lantern PLEASE NOTE when selecting the Sealite Flash Characteristic fields in the Custom Flash Code fields below will populate with the particular information Once set information about the selected flash code will also be updated in the Existing Configuration box IMPORTANT the amount of power your lantern draws through the night depends on the duty cycle i e the amount of time ON as a proportion to the timing cycle
44. lifetime and quality of light These features provide a viable alternative to traditional lighting products and save money with energy efficiency and long service life Each individual LED within the Apollo 155 has a number of pre defined Advanced Operation Settings as determined by the positioning of the LEDs during manufacture and the programming set Users may activate deactivate particular advanced operation settings using the Sealite Lantern Programmer including All LEDs the lantern will flash the selected flash code using all the LEDs All LEDs will flash with the same flash characteristic with the same sync offset at the same intensity This is the default configuration for the lantern Bank 1 Only the lantern will flash the LEDs of Bank 1 only All LEDs found in banks 2 3 amp 4 will be turned off All LEDs in bank 1 will flash with the same flash characteristic with the same sync offset at the same intensity This is used on a lantern that contains two or more coloured LEDs Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Bank 2 Only the lantern will flash the LEDs of Bank 2 only All LEDs found in banks 1 3 amp 4 will be turned off All LEDs in bank 2 will flash with the same flash characteristic with the same sync offset at the same intensity This is used on a lantern that contains two or more coloured LEDs
45. lite Lantern Programmer and select copy e Navigate to the hard drive location where you would like to save this program and then right mouse click and select paste A copy of the programming software will now be saved to your computer hard drive to add the programmer to your computer desktop for ease of future access right mouse click and select Send to desktop e Double click the file called Sealite Lantern Programmer A new window will appear displaying the Sealite Lantern Programmer PLEASE NOTE other documents have been saved on the USB drive for your information amp convenience including the latest product specifications sheet power calculator and an electronic version of the installation and service manual You may wish to view these documents to read more about the innovative features and benefits of the Apollo 155 IMPORTANT the Sealite Lantern Programmer is designed for Windows Platforms only Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm amp Sealite Lantern Programmer 1 0 0 2 COM Port Selection COM1 v Closed Lantern Locking Open COM Port Lock State Unlock Password Information Operation Flash Code Intensity Sensor Sync Pulse LED Specific Lantern Name Name Lantern Description Lantern Information Unknown Master Board Please contact Sealite for the la
46. lite com au Information Operation Flash Code Intensity Sensor Sync Pulse LED Specific Lantem Locking Lock State Unlock Password Change Pa Lantern Name Name Sealite Lantern 1 ME Sealite Lantern 1 Lantern Information Features F7FFE3 peration Setting Advanced peration Setting Colour Green Peak Intensity 1400 candela Flash Code 000 Talbot Plateau Intensity 21 875 Pulse Leading Edge Pulse Trailing E dae Sync Delay Sync Offset Light Sensor Dusk 04 Light Sensor Dawn 08 Battery Sensor Flat 49 Battery Sensor Low 00 Battery Sensor Ok CA Temperature Sensor Hot BC Temperature Sensor Ok 5C Image 2 Sealite Lantern Programmer Information tab showing COM Port connection established Lantern Name amp Lantern Information Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm 4 Programming the Lantern Now that the Sealite Lantern Programmer is running and connected to a specific lantern the user may configure individual settings of the lantern to suit their particular requirements Programming Options Available Include Naming the Lantern up to 44 characters Operation Setting o Standby o Always On o Dusk to Dawn Advanced Operation Settings configure individual banks of LEDs eg sectored rotating amp wrec
47. mode To program the lantern operation setting see Image 3 Click the Operation tab at the top of the Sealite Lantern Programmer e From the Operation Setting box select the desired lantern operation setting from the drop down field Once selected from the drop down field the lantern will automatically send the setup instruction to the lantern eg lantern will automatically change setup PLEASE NOTE to test lantern setting for Dusk to Dawn mode cover the lantern with a dark cloth jacket for approximately 1min The lantern will then begin flashing to the selected flash code IMPORTANT when programming the lantern it may be necessary to use the Always On Operation Setting so there is no delay when sending a message to the lantern and viewing testing the new setting To maximise the lantern operational life Sealite recommends setting the lantern operation setting to dusk to dawn Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm amp Sealite Lantern Programmer 1 0 0 2 COM Port Selection Information Operation Flash Code Intensity Sensor Sync Pulse LED Specific OM1 COM1 Open 0 tion Setti Close COM Port EN Operation Setting Dusk till Dawn Dusk to Davik Dusk to Dawn Mode The Lantern will be active and flash deed rd the selected flash code at night The Lantern will be in
48. morning To program the lantern Ambient Light Thresholds see Image 6 e Click the Sensor tab at the top of the Sealite Lantern Programmer e From the Light Sensor box type in the desired dusk amp dawn thresholds e Click the Set Light Sensor button to send the new setup instruction to the lantern 4 9 Battery Sensor This feature enables the user to adjust the battery voltage thresholds of the lantern including Flat Battery The lantern will automatically shut off when the battery voltage reaches the set threshold lanterns are factory set to 10v Low Battery The lantern will automatically drop in intensity when the battery voltage reaches the set threshold the factory setting is disabled Recovery Threshold The recovery threshold determines the voltage the battery must be re charged to before the lantern recovers from a Low Battery or Flat Battery condition lanterns are factory set to 12v To program the lantern Battery Voltage Thresholds see Image 6 e Click the Sensor tab at the top of the Sealite Lantern Programmer e From the Battery Sensor box type in the desired flat low amp recovery battery thresholds in volts e Click the Set Battery Sensor button to send the new setup instruction to the lantern 4 10 Temperature Sensor The user may program the lantern to automatically reduce it s intensity level when the internal lantern temperature reaches a certain level To program th
49. n the selected flash characteristic Rotating Bank 2 CCW using bank 2 LEDs only the lantern will rotate anti clockwise at full speed on the selected flash characteristic Rotating Full Speed CW the lantern will rotate clockwise at full speed on the selected flash character Rotating Half Speed CW the lantern will rotate clockwise at half speed on the selected flash character Rotating Bank 1 CW using bank 1 LEDs only the lantern will rotate clockwise at full speed on the selected flash characteristic Rotating Bank 2 CW using bank 2 LEDs only the lantern will rotate clockwise at full speed on the selected flash characteristic Rotating VOR CW the lantern will rotate clockwise as a VOR lantern on the selected flash characteristic Bank 1 will rotating clockwise bank 2 will flash in sync at time t zero Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm To activate deactivate a particular Advanced Operation Setting see Image 3 e Click the Operation tab at the top of the Sealite Lantern Programmer e From the Advanced Operation Setting box select the desired advanced operation setting required from the drop down field Once selected from the drop down field the lantern will automatically send the setup instruction to the lantern eg lantern will automatically change setup PLEASE N
50. nditions hereinafter set forth for a period of three 3 years from the date of purchase by the original purchaser 5 Sealite Pty Ltd warrants that any Sealite marine lighting products other than the Telemetry Products BargeSafe Products and Area Lighting Products Sealite Products will be free from defective materials and workmanship under normal and intended use subject to the conditions hereinafter set forth for a period of three 3 years from the date of purchase by the original purchaser 6 Sealite Pty Ltd will repair or replace at Sealite s sole discretion any Telemetry Products BargeSafe Products Area Lighting Products or Sealite Products found to be defective in material and workmanship in the relevant warranty period so long as the Warranty Conditions set out below are satisfied 7 If any Telemetry Products BargeSafe Products Area Lighting Products or Sealite Products are fitted with a rechargeable battery Sealite Pty Ltd warrants the battery will be free from defect for a period of one 1 year when used within original manufacturer s specifications and instructions Warranty Conditions This Warranty is subject to the following conditions and limitations 1 The warranty is applicable to lanterns manufactured from 1 1 2009 2 The warranty is void and inapplicable if a the product has been used or handled other than in accordance with the instructions in the owner s manual and any other information or
51. nnnvnnnnrnnnnnennnnennnnnsnnnnnn Page 7 Programming Instructions rrrrrrnnnrrnnrrrnnnrvnnrrrnnrrnvnnrnnnnennnnennnsnnnnn Page 8 1 Run the Programming Software ccccccseeeeeeseseeeeeeeeeaeeees Page 8 2 Connect the Apollo 155 Lantern to a Power Source amp the Computer EE m S Page 10 3 Establish the Programmer to Lantern Computer Connection COM POFT u sacco pale rra Resa ne aet send ec na Page 10 4 Programming the Lantern eee eese Page 12 5 Finalising the Lantern Programming ssessssse Page 26 Power Requirements rrrrrnnnnnnnnnnnnnnrnnnnnnnnnnnnnnnrnnnrennnrennnnennnnennnsen Page 27 Lantern TESUNG REESE NE Page 28 Lantern Installation rronrrnnnnnnnnnrrrnnrrrnnnrnnnnnnnnnrvnnnrnnnnennanennnnennnnen Page 28 Option 1 Installation of Lantern to Mains Power Page 28 Option 2 Installation of Lantern to Solar Powered System Page 29 Flash Code Reference List rrannrnrannrrrrnnrrrrnnnrrrnnnrrrrnnrrrnnnnrnnnnnen Page 34 Maintenance and Servicing rrrrnrrrrnnnnrrrnnnrrrnnnrrvnnnrrvrnnnnnnnnnnnnnnnen Page 39 Trouble Shooting seesssesseeeeeeee nennen Page 40 Sealite LED Light Warranty rrrrrnnnrnrnnrrrrnnrrnrrnnnenrnnrrrvnnnrrnrnnnennnn Page 42 Version No Description Date Approved 1 0 Manual launch May 2010 K Paton 1 1 Warranty and Tech Image Update July 2010
52. nsity level per count 224 PLEASE NOTE programming the LEDs to have linear slow leading and trailing edges is particularly useful for rotating beacons as this emulates a smoother transition from one LED to the next giving the impression of a mechanical rotating beacon without the drawback of moving parts To program the LED Pulse Shape see Image 7 e Click the Sync Pulse tab at the top of the Sealite Lantern Programmer e From the Pulse Shape Selection box select the desired leading edge amp trailing edge pulse shapes Once selections are made the lantern will automatically send the setup instruction to the lantern eg lantern will automatically change setup Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm amp Sealite Lantern Programmer 1 0 0 2 COM Port Selection Information Operation Flash Code Intensity Sensor Sync Pulse LED Specific COM1 COM1 Open Close COM Port F4 HEX 42 3D 43 45 2C 20 54 3D 32 36 0D HEX 42 3D 43 45 2C 20 54 3D 32 36 0D HEX 8F F1 DO 08 01 00 DY F2 Write Pulse Shape HEX 8F F1 B0 08 01 00 BS F2 Pulse Shape Linear Slow Square Acknoledge F4 HEX 42 3D 43 46 2C 20 54 3D 32 36 OD HEX 8F F1 A0 06 46 F2 Request Lantern Type HEX 8F F1 A0 10 53 4C 30 33 39 20 52 65 76 31 69 F2 Lantern Type SLO39 Rev Acknoledge F4 HEX 8F F1 41 06 47 F2 Re
53. ormation available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Trouble Shooting Problem Lantern will not activate Ensure lantern is in darkness Wait at least 60 seconds for the program to initialise in darkness Ensure battery terminals are properly connected Ensure lantern is connected to a 12volt power supply Programming settings will not Check programming cable is properly connected to both lantern and change computer and check that the lantern is connected correctly to a power source and that the power source is charged eg battery For further support please contact Sealite Pty Ltd Email support sealite com Tel 61 0 3 5977 6128 Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Sealite LED Light Warranty V2 0 Activating the Warranty Upon purchase the Sealite Pty Ltd warranty must be activated for recognition of future claims To do this you have two 2 options 1 Postal Registration please complete the Sealite Warranty Registration Card and return to Sealite within 30 days of your purchase 2 Online Registration please complete the Online Registration Form at www sealite com Sealite Pty Ltd will repai
54. ovided under this warranty all other express or implied warranties relating to the above product is hereby excluded to the fullest extent allowable under law The warranty does not extend to any lost profits loss of good will or any indirect incidental or consequential costs or damages or losses incurred by the purchaser as a result of any defect with the covered product Warrantor Sealite Pty Ltd has authorised distribution in many countries of the world In each country the authorised importing distributor has accepted the responsibility for warranty of products sold by distributor Warranty service should normally be obtained from the importing distributor from whom you purchased your product In the event of service required beyond the capability of the importer Sealite Pty Ltd will fulfil the conditions of the warranty Such product must be returned at the owner s expense to the Sealite Pty Ltd factory together with a photocopy of the bill of sale for that product a detailed description of the problem and any information necessary for return shipment Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor Sealite products are subject to certain Australian and worldwide patent applications Latest products and information available at www sealite com www sealite com Apollo 155 Long Range Lantern Adjustable from 4 12nm Other Sealite Products Available
55. quest Lantern Version Pee Pulse Shape Selection SLO39 Rev 1 00 Trade Show SLO3 Rev3 1 00 Trade Show SLO39 Rev1 Master Board unknown software version Please contact Sealite for the latest version of the Sealite Lantern Programmer www sealite com au Fi Existing Configuration Leading Edge Linear Slow Trailing Edge Square Square Colour Green Operation Setting Always On Flash Code 000 Talbot Plateau Intensity 100 000 High www sealite com au Image 7 Sealite Lantern Programmer Sync Pulse tab showing Sync Delay amp Pulse Shape Selection 4 12 LED Specific Programming for Advanced Users The Sealite Lantern Programmer also enables users to individually set up specific configurations of each of the 16 LEDs in the Apollo 155 This feature is recommended for advanced users only and those who require a unique configuration to suit their particular installation requirements The user may program each individual LED to a specific flash code intensity amp flash synchronisation offset each LED may be set to an entirely different setting IMPORTANT to enable LED specific setup the Advanced Operation Setting must to set to either Sector to program individual Flash Code amp Intensity settings or Complex Sector to program individual Sync Offset settings See Advanced Operation Setting section of this manual for details under
56. r or replace your LED light in the event of electronic failure for a period of up to three years from the date of purchase The unit must be returned to Sealite freight prepaid Warranty Terms 1 Sealite Pty Ltd warrants that any Sealite marine products fitted with telemetry equipment including but not limited to AIS GSM GPS or RF Telemetry Products will be free from defective materials and workmanship under normal and intended use subject to the conditions hereinafter set forth for a period of twelve 12 months from the date of purchase by the original purchaser 2 Sealite Pty Ltd warrants that any BargeSafe Series of LED barge light products BargeSafe Products will be free from defective materials and workmanship under normal and intended use subject to the conditions hereinafter set forth for a period of twelve 12 months from the date of purchase by the original purchaser 3 Sealite Pty Ltd warrants that any LED area lighting products Area Lighting Products but not including sign lighting products will be free from defective materials and workmanship under normal and intended use subject to the conditions hereinafter set forth for a period of twelve 12 months from the date of purchase by the original purchaser 4 Sealite Pty Ltd warrants that any LED sign lighting products Sign Lighting Products will be free from defective materials and workmanship under normal and intended use subject to the co
57. range may be set in nautical miles nm with dependence on listings of atmospheric transmissivity and background lighting conditions candela cd or direct pulse width modulation PWM see image 5 Atmospheric Transmissivity AT when a light beam passes through the atmosphere the atmospheric transmissivity factor indicates how much light is absorbed by the atmosphere For example when AT 0 85 this means that 85 of the original light intensity is visible after 1nm Consequently 15 of light is lost to atmospheric absorption amp Sealite Lantern Programmer 1 0 0 2 COM Port Selection COM COM1 Open Intensity Selection from Desired Range in Nautical Miles Close COM Port x Desired Lantern Range iz 1372 60 Candela quere Nautical Miles aisi dis UL 23peclrc tensity PESE ash Code Atmospheric Transmissivity 0 7411 IALA Recomendation w D Specific Flash Code E KAN ISTE m Bes ioa A Background Lighting Conditions Night No Background Lighting w n Flash Code Type B D Bank Information Operation Flash Code Intensity Sensor Sync Pulse LED Specific luminance 2x100 lux ector LED Bank otating Bank F Be Pas LED Specific Offset Intensity Selection from a Desired Intensity in Candela Read Write Pulse Shape Desired Lanter Intensity 1372 599 Acknoledgef F4 Candela HEX 42 3D 43 45 2C 20 54 3D 31 43 0D HEX 42 3D 43 45 2C 20 54 3D 31 43 0D
58. selected flash code IMPORTANT to maximise the lantern operational life Sealite recommends setting the lantern operation setting to Dusk to Dawn To close the Sealite Lantern Programmer e Click the red cross at the top right of the window Now that you have exited the Sealite Lantern Programmer software you may disconnect the lantern from your computer and the power source The Apollo 155 is now ready for final testing and then installation Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Power Requirements Apollo 155 Power Requirements 2500 100 2000 Pa 75 ge amp 1500 z 100 O 50 gt mm WHITE un 75 o 1000 GREEN 100 50 RED 25 75 100 YELLOW 709 25 50 15 JP 50 JPP 0 0 0 5 1 1 5 2 2 5 3 Current Draw in Amps Graph 1 Power requirements of Apollo 155 lantern WHITE Current Draw Intensity Amps cd EN NM KEN Prot ves om 15 2 138 1802 2 187 1036 Us zoe ww zer we Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm Lantern Testing Now that the Apollo 155 has been programmed to suit the project requirements it s important that the lantern is tested prior to installation including flash code and intensity settings To test
59. test version of the Sealite Features Lantern Programmer Operation Setting Www sealite com au Advanced Operation Setting Colour Peak Intensity Flash Code Existing Configuration Talbot Plateau Intensity Colour Pulse Leading Edge Pulse Trailing Edge Operation Setting Sync Delay Flash Code Sync Offset T albot Plateau Intensity gnt eK Dusk s ght Sensor Dawn ery Sensor Flat isor Low Battery Sensor Ok Temperature Sensor Hot e a Ule Temperature Sensor Ok www sealite com au Image 1 Sealite Lantern Programmer Latest products and information available at www sealite com Sealite Apollo 155 www sealite com Long Range Lantern Adjustable from 4 12nm 2 Connect the Apollo 155 Lantern to a Power Source amp the Computer Now that the programming software has been run you will need to connect the Apollo 155 lantern to your computer amp power supply so that it can receive programming commands Connecting the Lantern to a Power Source Option 1 Battery e Connect the blue negative wire of the lantern to the battery negative terminal e Connect the brown positive wire of the lantern to the battery positive terminal Option 2 12v Power Supply e Connect the blue negative wire of the lantern to the power supply negative termainal e Connect the brown positive wire of the lantern to the power supply positive terminal CAUTION to avoid personal injury do not position the Apollo 155 lantern at
60. ustomers worldwide and offer the widest range of solar powered LED lanterns in the marketplace Electronics Sealite employs leading in house electronic engineers in the design and development of software and related circuitry All individual electronic components are sourced directly by Sealite procurement staff ensuring that only the highest quality components are used in our products LED Technology All marine lanterns use the latest advancements in LED Light Emitting Diode technology as a light source The major advantage of LED s over traditional light sources is well established in that they typically have an operational life in excess of 100 000 hours resulting in substantial savings to maintenance and servicing costs Precision Construction Commitment to investing in the design and construction of injection moulded parts including optic lenses light bases and a range of other components ensures that all Sealite products are of a consistent and superior quality Optical Performance Sealite manufactures a range of marine LED lenses moulded from multi cavity dies Complex shapes such as the SL70 BargeSafe and 16 segment multi focus lenses are a testament to the company s superior in house lens manufacturing capabilities and outstanding optical performance Award winning Patented Technology Several United States and Australian patent registrations are held on Sealite s range of innovative designs with other regional patents p

Download Pdf Manuals

Related Search

Related Contents

Subscription Advantage Pack  Horton Air Clutch Manual  USER GUIDE - Multimessage Systems Ltd  Tac-Eye® SMM - Six15 Technologies  12,43 MB - Alice  Uncle Milton Dream Fairy Room Light  DB-46 user manual COMPLETE  Installation/Service Manual Slow Exhaust Autoclave  Coway AP-1008DH User's Manual  n° 126 - Déc. 2010 - La Guilde Européenne du Raid  

Copyright © All rights reserved. Failed to retrieve file