Documentazione allegata
Contents
1. Add variable delay range 0 00 ns to period 6 6 ns maximum 999 ms Accuracy 5 Ins Double pulse delay range 6 65ns to period width 3 3 ns maximum 999 ms Min period 13 3 ns 75 MHz Accuracy 5 250 ps Transition time range 10 90 Minimum with overprogramming Accuracy Linearity Notes fe 2 00 ns to 200 ms variable lt 2 0 ns for levels within 5 V window lt 2 5 ns for all levels 1 4 ns typ for ECL levels 20 80 10 200 ps 3 typ for transitions gt 100 ns 1 Additional 0 ns to 28 ns delay range with the Agilent 81107A Multichannel Burst Count 2 to 65536 single or double pulses Delay delay phase or of period Fixed delay 34 ns typical Double pulse and delay mutually exclusive Duty cycle set between 0 1 and 94 0 subject to width limits 99 9 with overprogramming Repeatability is typ four times better than accuracy Transition times leading trailing edge or of width Leading and trailing edges are independent within one of the following overlapping segments 1 20 ratio 2 ns 3 ns 20 ns 10 ns 200 ns 100 ns 2 ms lus 20 us 10 us 200 us 100 us 2 ms 1 ms 20 ms 10 ms 200 ms Overprogramming values can be entered exceeding the specified range Level Pulse Performance Characteristics source impedance accuracy voltage 50 Q load amplitude high level low leve2. Agilent Technologies 8110A 150 MHz Pulse Generator The Agilent 8110A 150 MHz Pulse Generator is a test instrument that provides sufficient speed and performance for testing designs to their limits testing under real world conditions to verify the proper function of the design pulses digital patterns and multilevel waveforms for testing current logic technologies CMOS TTL LVDS ECL etc credible measurements easy set up and operation upgrade capability aage Agilent Technologies 8110A 150 MHz Pulse Generator Technical Specifications Real World Pulses With the pattern feature and the the optional second channel of the Agilent 8110A real world s ignals like reflections distorted pulses or three or even four level signals can be simulated Pattern Based Timing The Agilent 8110A simulates all the clock and data signals needed to test digital designs Conditions such as extended delays can be generated using pattern based timing features ois Agilent Technologies ia Innovating the HP Way Flexible pulses or patterns for digital designs Key Features 150 MHz Timing 2 ns Variable Transitions 10 Vpp 20 Vpp into 50 Q 10 ps Resolution 0 1 Frequency Accuracy 4 kbit Pattern per Channel 3 and 4 Level Signals 1 or 2 Output Channels SCPI Programming Commands Small Size Graphic Display Clean Pulses The Agilent 8110A generates clean pulses with 10 ps re
3. 50 ppm year typical Trigger Modes Standard trigger modes and Internal triggered pulses double pulses bursts or patterns Min pulsewidth 3 3 ns Strobe output and trigger output Level TTL or ECL selectable Output impedance 50 Q typical Strobe output user defined 16 kbit pat tern NRZ when in pattern mode Max external voltage 2 V 7 V Transition times 2 ns typical Pattern 4096 bits NRZ in pattern mode Delay from external input to strobe output in pattern mode same as for trigger output Trigger Output Level TTL or ECL selectable Output impedance 50 Q typical Trigger pulse width typically 50 of period Maximum external voltage 2 V 7 V Transition times 2 ns typical Delay from external input to trigger output 18 5 ns typical Clock Input PLL Reference Input to be used as a external system clock input pulse frequency input frequency b 5 MHz or 10 MHz frequency refer ence input for internal PLL Frequency can be measured Rear panel BNC connector Input impedance 50 Q or 10 kQ selectable Threshold 10 V to 10 V Maximum input voltage 15 V Input transitions lt 100 ns Input Frequency dc to 150 MHz Minimum Pulse width 3 3 ns Input sensitivity 300 mVpp typical Delay from clock input to trigger output 22 ns typical 5 Agilent 81107A Multichannel Deskew for the Agilent 8110A Can be retrofitted without recalibration Supports two output channels The multichannel
4. deskew can be used for two applications Up to 10 channels compensates delay between external input and trigger outputs when using up to five 8110As synchronously Delay calibration compensates for measurement system delays or pre trigger delays of oscilloscopes Variable range 0 ns to 28 ns Additional fixed delay 6 5 ns typical Resolution 10 ps User Interface Overprogramming all parameters can be overprogrammed exceeding specifications to fully exploit the hardware limits Setting check warning messages indi cate potentially conflicting parame ters due to inaccuracy Error messages indicate conflicting parameters Help key displays a context sensitive message Autoset key resolves all timing con flicts Non volatile memory current setting is saved on power down Up to nine user settings and one fixed default setting can be stored in the instrument Clear memory clears all nine user set tings Memory card 320 settings can be stored on a 1 MB PCMCIA card MS DOS Remote Control Operates according to IEEE standard 488 2 1987 and SCPI 1992 0 Function Code SH1 AH1 T6 L4 SR1 RL1 PPO DC1 DT1 CO Programming times all checks and display off General ASCII command Typ exec time One parameter nee 30 ms typ Recall setting 250 ms typ 16 k pattern transfer 600 ms typ Operating temperature 0 C to 55 C Storage temperature 40 C to 70 C Hu
5. 91112 Opt ABF French Localization 08110 91212 Opt ABZ Italian Localization 08110 91312 Opt ABE Spanish Localization 08110 91412 Opt ABJ Japanese Localization 08110 91512 Opt ABO Chinese Localization 08110 91612 Additional documentation options Opt 0B2 Additional English Operating Manual 08110 91012 Opt OBW Service Manual 08110 91021 08110 91031 Service Documentation Component Level Support Options Opt 1BP MIL Std 45662A Calibration with Test Data Opt W32 3 Year Customer Return Calibration Coverage Opt W34 3 Year MIL Calibration Service Opt W50 5 Year Customer Return Repair Coverage Opt W52 5 Year Customer Return Calibration Coverage Opt W54 5 Year MIL Calibration Service Related Agilent Literature Agilent Family of Pulse Pattern Generators brochure p n 5980 0489E For more information please visit us www agilent com find pulse_generator Agilent Technologies Test and Measurement Support Services and Assistance Agilent Technologies aims to maximize the value you receive while minimizing your risk and problems We strive to ensure that you get the test and measurement capabilities you paid for and obtain the support you need Our extensive support resources and services can help you choose the right Agilent products for your applications and apply them successfully Every instrument and system we sell has a global warranty Support is available for at least five years beyond the producti
6. at e g period as frequency The alternative graphic display shows the timing relationship of all pulse parameters on both channels graphically making setting up the pulse generator easy no extra oscilloscope is required Pulses and patterns can be set up quickly using the convenient cursor keys knob and data entry keys You can even use the Autoset Key to resolve all timing conflicts Memory Card Settings can be stored permanently either internally or on the memory card for duplication in another test set up Specifications Specifications describe the instrument s warranted performance Non warranted values are described as typical All specifications apply after a 30 minute warm up phase with 50 Q source load resistance and separate channels All specifications are valid from 0 C to 55 C ambient temperature Timing Characteristics Measured at 50 amplitude at fastest transitions in continuous mode and 50 source impedance Mainframe Output module Frequency range Timing resolution RMS jitter period width delay Period range Accuracy Width range Accuracy Agilent 8110A Agilent 81103A 1 Hz to 150 MHz 3 digits 10 ps best case 0 03 25 ps Agilent 8110A Agilent 81103A with 81106A PLL 1 mHz to 150 MHz 4 digits 10ps best case 0 003 20 ps 6 65 ns to 999 ms 6 65 ns to 999 s 5 100ps 0 1 3 30ns to period 3 3 ns maximum 999ms 5 250 ps
7. d accuracy range resolution and jitter are improved as shown in the diagram Asynchronous trigger ing possible Internal triggered burst the internal PLL replaces an external trigger source External clock the output period is determined by signal at clock input Frequency accuracy can be increased by using a precise external clock Trigger synchronously to external clock the output period is synchronous to the signal at clock input The signal at external input is used for arming External width the pulse shape can be recovered Period and width of an external input signal is main tained Delay levels and transitions can be set Manual simulates an external input signal Internal triggered only with Agilent 81106A internal PLL replaces an external trigger source Pulses double pulses bursts or patterns can be set Inputs and Outputs External input used for trigger gate or external width Input impedance 50 Q 10 kQ table Threshold 10 V to 10 V Max input voltage 15 Vpp Sensitivity lt 300 mVpp typical Transitions lt 100 ns Frequency dc to 150 MHz selec Agilent 8110A Internal Oscillator 3 Pulse Period Agilent 81106A j m Po pet ma l Trigger Signal Continuous Figure 1 Period Range 6 65 ns to 999 s Accuracy 0 1 Resolution 4 digits 10ps best case RMS jitter 0 003 20ps Stability
8. ddition Load compensation the actual load value can be entered for loads 50 Q to display actual output values Normal complement selectable Limit programmable high and low lev els can be limited to protect the device under test If the instrument is equipped with 2 output modules channel 2 can be added to channel 1 internally In this case the second output is disabled 2 3 an 4 level signals can be generated Pattern Mode Pattern length 4 kbit channel and strobe output Output format RZ return to zero NRZ non return to zero DNRZ delayed non return to zero Random pattern PRBS 2 n 1 n 7 8 12 Trigger Modes Continuous continuous pulses double pulses bursts single or double pulses or patterns External triggered each active input transition rising falling or both generates a single or double pulse burst or pattern External gated the active input level high or low enables pulses double pulses bursts or patterns The last single double pulse burst or pattern is always completed Agilent 81106A PLL External Clock for the Agilent 8110A Can be retrofitted without recalibration Useful for applications which require a phase locked loop PLL or an external clock Locking to an external frequency reference the internal PLL is locked to the 5 MHz or 10 MHz frequency at the PLL reference input High accuracy the output period is determined by the internal PLL Perio
9. internet phone or fax get assistance with all your test amp measurement needs Online assistance www agilent com find assist Phone or Fax United States tel 1 800 452 4844 Canada tel 1 877 894 4414 fax 905 206 4120 Europe tel 31 20 547 2000 Japan tel 81 426 56 7832 fax 81 426 56 7840 Latin America tel 305 267 4245 fax 305 267 4286 Australia tel 1 800 629 485 fax 61 3 9272 0749 New Zealand tel 0 800 738 378 fax 64 4 495 8950 Asia Pacific tel 852 3197 7777 fax 852 2506 9284 Product specifications and descriptions in this document subject to change without notice Copyright 2000 Agilent Technologies Printed in Germany 10 2000 5980 1212E
10. l level accuracy eso io n current into short amplitude high level low level minimum transition minimum period minimum width delay accuracy add fixed delay typical Max external voltage Short circuit current Dynamic Crosstalk Baseline noise Overshoot preshoot ringing Settling Time Note separate channels channel addition at output channel1 hannel 1 Channel 2 Channel 1 Channel 2 50 Q 1 KQ 48 Q 500 Q typ 1 100 mV to 10 0V 200 mV to 20 0V OV to 19 5 Vl OV to 20 0 V doubles into open 9 90 V to 10 0 V 18 8 V to 19 0 V 19 3 V to 19 5 V 20 0 V to 20 0 V 10 0V to 9 90 V 19 0V to 18 8 V 19 5 V to 19 3 V 20 0 V to 20 0 V 1 ampl 50 mV 1 ampl 100 mV 4 mA to 400 mA 396 mA to 400 mA 792 mA to 800 mA 400 mA to 396 mA 800 mA to 792 mA 2 0 ns 2 2 5 ns 7 5 ns typ 2 5 ns typ 7 5 ns typ 30 ns typ 30 ns typ 24 ns typ 24 ns typ 90 ns typ 0 mA to 800 mA s3ns fl2 ns typ 3 5 ns typ 12 ns typ 45 ns typ 45 ns typ me O o o o ET TUBS Hp 25V 400 mA max lt 0 1 typ 0 mV RMS typ 5 of amplitude 20 mV 30 ns typical 1 max amplitude of bipolar signals is limited to values between 10 Vpp 0 2 V 10 3 V peak levels and 14 Vpp 7 V 7 V peak levels 2 for levels within 5 V window Level parameters voltage or current high or low level offset or amplitude On off relays connect disconnect output HiZ Channel A
11. midity 95 r h up to 40 C ambi ent temperature EMC conforms to EN50082 1 EN 55011 Class A Noise emission 5 7 bel typical Battery Lithium CR2477 N Safety IEC1010 CSA1010 Power requirements 100 240 Vac 10 50 60 Hz 100 120 Vac 10 400 Hz Power consumption 300 VA max Max dimensions H W D 89 mm 426 mm 521 mm Weight 9 2 kg net 13 8 kg shipping Recalibration period one year recommended Warranty three years standard Ordering Information 8110A The minimum order must include the 8110A mainframe and one 81103A output channel A second output channel the 81106A PLL external clock or the 81107A multichannel deskew are optional All configurations are available from the factory Alternatively additional modules can be ordered later and fitted by the user or an Agilent service facility Category Oty per Mainframe Description Number min max Mainframe 1 150 MHz Pulse Generator Mainframe Agilent 8110A Modules 1 2 10 V 2 ns Output Channel Agilent 81103A 0 1 PLL External Clock Agilent 81106A 0 1 Multichannel Deskew Agilent 81107A All options are orderable with the mainframes Accessories Opt UN2 Rear Panel Connectors Opt 1CP Rack Mount and Handle Kit 5062 3975 Opt 1CN Handle Kit 5062 3988 Opt 1CM Rack Mount Kit 5062 3974 Opt 1CR Rack Slide Kit 1494 0060 Opt UFJ 1 MB SRAM Memory Card Agilent 15104A Pulse Adder Splitter Language options Opt ABD German Localization 08110
12. on life of the product Two concepts underlay Agilent s overall support policy Our Promise and Your Advantage Our Promise Our Promise means your Agilent test and measurement equipment will meet its advertised performance and functionality When you are choosing new equipment we will help you with product information including realistic performance specifications and practical recommendations from experienced test engineers When you use Agilent equipment we can verify that it works properly help with product operation and provide basic measure ment assistance for the use of specified capabilities at no extra cost upon request Many self help tools are available Your Advantage Your Advantage means that Agilent offers a wide range of additional expert test and measurement services which you can purchase according to your unique technical and business needs Solve problems efficiently and gain a competitive edge by contracting with us for calibration extra cost upgrades out of warranty repairs and on site education and training as well as design system integration project management and other professional services Experienced Agilent engineers and technicians worldwide can help you maximize your productivity optimize the return on investment of your Agilent instruments and systems and obtain dependable measurement accuracy for the life of those products Innovating the HP Way Agilent Technologies By
13. oothly integrated into automated test systems ensuring low integration costs low costs of ownership All Digital Waveforms The waveform and trigger flexibility of the Agilent 8110A make it a universal digital stimulus for any automated test sys tem Reliable Measurements Accuracy is specified over the whole temperature range that exists in a test rack Setting check and built in diagnostics allow you to monitor the correct operation of the Agilent 8110A in an automated test system Easy Rack Integration The small size of the Agilent 8110A saves valuable rack space Rear panel connectors and rack mount kits are optional Reduced Programming Investment The local user interface eases the transition from manual to automated measurements and from the R amp D bench to automated manufacturing test All parameters of the Agilent 8110A are programmable via GPIB SCPI Standard Commands for Programmable Instruments facilitates the standardization of test programs lonly with the Agilent 81106A PLL External Clock 2only with the Agilent 81107A Multichannel Deskew Low Cost of Ownership The proven hardware reliability of Agilent test and measurement prod ucts results in high uptime of test systems and low maintenance costs The Agilent 8110A offers a 3 year standard warranty Easy Set up and Operation View all timing parameters for both channels at a glance Timing and level parameters can be entered in any form
14. solution low jitter and good pulse performance across all operating temperatures or settings Parameters and trigger modes can be changed without generating unwanted pulses so that reliable measurements are guaranteed High Accuracy Excellent accuracy over a wide temperature range guarantees repeatable measurement results Frequency accuracy jitter resolution and range can be enhanced further when the Agilent 8110A is used with the internal phase locked loop PLL of the Agilent 81106A as pulse period source Delay Calibration Systematic delays caused by cables connections and adapters can be compensated when the Agilent 81107A is installed It offers enough additional delay range to compensate for 5 m of BNC cable External Clock or Reference Frequency An external synthesizer or system clock can be used as clock source at the clock input of the Agilent 8110A to achieve the frequency accuracy and required This feature is ideal for simulating digital control signals synchronously to the clock of the microprocessor Up to 10 channels in parallel 2 Up to 4 Agilent 8110As can be slaved to a master so that 10 synchronous channels can be programmed independently With the Agilent 81107A multichannel deskew installed the propagation delay of the set up can be compensated and all other output channels zeroed to the reference channel Smooth Integration into Automated Test Systems The Agilent 8110A can be sm
Download Pdf Manuals
Related Search