Home

Samsung ME46A manual do usuário

1. Header Command Data length a Data y Wall Checksum OxAA Ox5C eee ie Mode Video Wall Mode A code used to activate Video Wall mode on a product 1 Full O Natural C Header S Data length Ack Nak r CMD Val1 nd Checksu Vi Wall m OxAA OXFF 3 A Ox5C eae Mode Video Wall Mode A code used to activate Video Wall mode on a product C m 0x50 TERR OXF ERR A code showing what error has occurred 1 Preparations 48 Preparations Safety Lock Function PC can be used to turn the Safety Lock function on or off on a product This control is available regardless of whether or not the power is turned on Viewing the safety lock state Get Safety Lock Status Checksum Enabling or disabling safety lock Set Safety Lock Enable Disable Header Data length Datalength Data Data Checksu Safety Lock Safety Lock Safety lock code to be set on a product 1 ON O OFF C Header cana Data length Ack Nak r CMD Val nd Checksu Il mM OxAA OXFF 3 A gen ee Lock Safety Lock Safety lock code to be set on a product poi m OF Ox6D ERR ERR A code showing what error has occurred 1 Preparations 49 Connecting and Using a Source Device 2 1 Before Connecting Check the following before you connect this product with other devices Devices that can be connected to this product include PCs camcorders speakers set too boxes
2. Changing the Setting for Clock Clock Set Set the Date and Time Select Clock Set Select Date or Time and then press 1 Use the number buttons to enter numbers or press the up and down arrow buttons Use the left and right arrow buttons to move from one entry field to the next Press when done To exit Clock Set select Close and then press C8 4 WZ o You can set the Date and Time directly by pressing the number buttons on the remote control 8 2 2 Sleep Timer Automatically shuts off the product after a preset period of time 80 min 60 min 90 min 120 min 150 min 180 min mi Use the up and down arrows to select a period of time and then press C To cancel Sleep Timer select Off 8 2 3 On Timer Set On Timer so that your product turns on automatically at a time and on a day of your choosing e On Timer You can set up three separate On Timer configurations On Timer 1 On Timer 2 On Timer 3 4 WZ You must set the clock before you can use On Timer o Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual If you select Manual you can choose the days you want On Timer to turn on your product 8 System 142 System WZ The check mark indicates days you ve selected o Time Set the hour minute Use the number buttons or the up and down arrow keys to enter numbers Use the left and right arrow buttons to change entry fields o Volume Set the desired volume leve
3. 7 3 1 Media Shows a list of mobile phones or connected devices which have been set up to use the Media function with this product The Media function is available in all devices which support DLNA DMC e Allowed Denied Allows Blocks the devices Network Delete Deletes the devices from the list 4 K This function only deletes the name of the device from the list If the deleted device is turned on or tries to connect to the product it may appear on the list again Using the Media Function An alarm window appears informing you that media contents videos photos music sent from a mobile phone will be displayed on your product The contents are played automatically 3 seconds after the alarm window appears If you press the RETURN or EXIT button when the alarm window appears the media contents are not played The first time a device accesses your product through the media function a warning popup window appears Press the button to select Allow This permits the phone to access the product freely and use the Media function to play content To turn off media contents transmissions from a mobile phone set Media to Off in the AllShare Settings Contents may not play on your product depending on their resolution and format The 1 and lt gt buttons may not work depending on the type of media content Using the mobile device you can control the media play For details refer to each mobile
4. o The channel can be changed only when the input source is TV o Only registered channels can be selected Volume mit The volume can be changed or the sound can be muted only for displays that are turned on a Volume o The volume can be adjusted using the slider bar in the range of O to 100 Adjust the volume of a selected display Input o Enable or disable Mute for a selected display Mute will automatically be disabled if Volume is adjusted when Mute is on Alert Fault Device Using MDC oO This menu shows a list of display devices which have following errors fan error temperature error brightness sensor error or lamp error Select a display device from the list The Repair button will be enabled Click the refresh button to refresh the error status of the display device The recovered display device will disappear from the Fault Device List Fault Device Alert oO Display device in which error is detected will be reported by email Fill in all required fields The Test and OK buttons will be enabled Ensure the Sender information and at least one Recipient are entered Using MDC 3 6 9 Screen Adjustment The screen settings contrast brightness etc can be adjusted Choose display devices from the list of sets and select the Picture tab Custom Select an item and change the corresponding screen setting Picture Mode Color 0 am Red Dynamic Contrast O
5. 4o Holiday Management 144 Menu Language 145 Eco Solution 145 Energy Saving 145 Eco Sensor Off On 146 No Signal Power Off 146 Auto Power Off Off On 146 Security 146 Safety Lock Off On 146 Button Lock Off On 147 Change PIN 148 Auto Protection Time 149 Screen Burn Protection 149 Pixel Shift 149 Timer SO Pixel 150 Side Gray 151 Video Wall hea Video Wall oul Format iron Horizontal 12 Vertical 192 Screen Position 153 Source AutoSwitch Settings Table Of Contents 154 154 154 155 155 155 155 155 156 1356 156 157 157 158 160 161 161 161 161 SUPPORT 162 162 162 163 MAGICINFO LITE 164 164 168 168 169 169 173 General Max Power Saving Game Mode BD Wise Auto Power Standby Control Lamp Schedule OSD Display Power On Adjustment Temperature Control Device Name Anynet HDMI CEC Anynet HDMI CEC Auto Turn Off Receiver DivX Video On Demand Network Remote Control Reset System Reset All Software Upgrade By USB Alternative Software Contact Samsung File Formats Compatible with MagiclInfo Lite Player Video Audio Network Schedule Connecting to a server MagiclInfo Lite Settings Approving a connected device from the server Setting the current time Table Of Contents 174 174 174 ice ie 180 181 182 183 183 184 185 les 185 es 186 186 187 TROUBLESHOOTING 188 GUIDE 188 188
6. 8 11 2 Auto Turn Off Setting an Anynet Device to turn Off automatically when the product is turned off We The active source on the product remote must be set to product to use the Anynet function If you set Auto Turn Off to Yes connected external devices are also turned off when the product is turned off If an external device is still recording it may or may not turn off Switching between Anynet Devices Press the TOOLS button select Anynet HDMI CEC and then press select Device List and then press the button mit If you cannot find a device you want select Refresh to refresh the list Select a device and then press the button You can switch to the selected device The Device List menu appears only when you set Anynet HDMI CEC to On in the System menu e Switching to the selected device may take up to 2 minutes You cannot cancel the switching operation while switching is in progress e Ifyou have selected an Anynet device by pressing the SOURCE button and then selecting its input Source you cannot use the Anynet function Make sure to switch to an Anynet device by using the Device List System Listening through a Receiver You can listen to sound through a receiver i e Home Theater instead of the Internal Speaker Select Receiver and set to On 2 Press the EXIT button to exit WZ e f your receiver supports audio only it may not appear in the device li
7. Setup Screen when you set up the network connection To get the IP address subnet mask gateway and DNS values contact your Internet Service Provider ISP If you have a Windows computer you can also get these values through your computer WZ You can use ADSL modems that support DHCP if your network requires a Static IP address ADSL modems that support DHCP also let you use Static IP addresses 7 1 2 Wired Network Settings MENU Network Network Settings ENTER 4 Set the network connection to use various Internet services such as AllShare and perform software upgrades Network Settings Select a network connection type 8 Wired oy Wireless General Previous Connect to the network using WPS PBC LAN cable Please make sure Next that the LAN cable is One Foot Connection ooma Cancel Automatic Network Setup Use the Automatic Network Settings when connecting your product to a network that supports DHCP To set up your product cable network connection automatically follow these steps How to set up automatically 1 Go to the Network Settings screen 2 Select Wired press and then press again J The network test screen appears and verifies the network connection When the connection has been verified the Internet is connected successfully message appears WZ e Ifthe connection process fails check the LAN port connection e Ifthe automatic process cannot find the networ
8. lt lt or gt gt button on the remote Slide Show You can set various slide show effects v Effect Background You can start or stop background music Y Music On Off Background You can set and select background music Music Setting when watching a photo file or slide show A ian can zoom into images in full screen mode WZ gt Pressing the INFO button while a device name is selected will display information about the selected device e Pressing the INFO button while a file is selected will display information about the selected file 6 Media 126 Media 6 6 Source MENU I Media Source ENTER C Source allows you to select a variety of sources and change source device names 6 6 1 Source You can display the screen of a source device connected to the product Select a source from Source List to display the screen of the selected source Videos Photos Music Source INI NSyatslas WZ The input source can also be changed by using the SOURCE button on the remote control The screen may not display correctly if an incorrect source is selected for the source device you want to convert to Media 6 6 2 Edit Name MENU Media Source TOOLS Edit Name ENTER You can rename a connected source device e Sometimes the screen will not display properly unless the name of a source device is specified in Edit Name In addition it is best to rename the
9. please contact the SAMSUNG customer care center LATIN AMERICA ARGENTINA BRAZIL CHILE COLOMBIA COSTA RICA ECUADOR EL SALVADOR GUATEMALA HONDURAS JAMAICA NICARAGUA PANAMA PERU PUERTO RICO REP DOMINICA TRINIDAD amp TOBAGO VENEZUELA 0800 333 3733 0800 124 421 4004 0000 800 SAMSUNG 726 7864 01 8000112112 0 800 507 7267 1 800 10 7267 800 6225 1 800 299 0013 800 27919267 1 800 234 7267 OQ 1800 5077267 800 7267 0 800 777 08 1 800 682 3180 1 800 751 2676 1 800 SAMSUNG 726 7864 0 800 100 5303 Appendix 200 Appendix Optimum Picture Quality and Afterimage Burn in Prevention Optimum Picture Quality e To enjoy the optimum picture quality go to Control Panel on your PC and adjust the resolution and refresh rate as follows The picture quality of TFT LCDs may degrade if the optimum resolution is not selected o Resolution 1920 X 1080 o Vertical frequency refresh rate 60Hz e Due to the nature of the manufacturing of this product approximately 1 pixel per million 1 ppm may be brighter or darker on the panel This does not affect product performance o he number of sub pixels by panel type 40 46 55 6 220 800 e Run Auto Adjustment to improve the picture quality If noise is still found even after auto adjustment adjust Coarse or Fine e Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn in or defective pixels
10. power cord with other products e Afire or electric shock may result Keep the power socket where the power cord is connected unobstructed e The power cord must be disconnected to cut off power to the product when an issue occurs e Note that the product is not completely powered down by using only the power button on the remote Hold the plug when disconnecting the power cord from the power socket e An electric shock or fire may result DO NOT PLACE CANDLES INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES e A fire may result Have a technician install the wall mount hanger e Installation by an unqualified person can result in an injury e Only use approved cabinets Do not install the product in poorly ventilated spaces such as a bookcase or closet e An increased internal temperature may cause a fire Install the product at least 10cm away from the wall to allow ventilation e An increased internal temperature may cause a fire Before Using the Product 6 Before Using the Product E T T Keep the plastic packaging out of the reach of children e Children may suffocate Do not install the product on an unstable or vibrating surface insecure shelf sloped surface etc e he product may fall and become damaged and or cause an injury e Using the product in an area with excess vibration may damage the product or c
11. 50 seconds WZ A warm up time that is too short may damage the product due to overvoltage cm 8 10 9 Temperature Control e Temperature Control This function detects the internal temperature of the product You can specify the temperature range that is acceptable The default temperature is set to 77 C The recommended operating temperature for this product is 75 to 80 C based on an ambient temperature of 40 C WZ The screen will become darker if the current temperature exceeds the specified temperature limit If the temperature continues to rise the product will power off to prevent overheating 8 10 10 Device Name Selet or enter a Device Name This name can be shown on network remote controls over the network System 8 11 Anynet HDMI CEC MENU I System Anynet HDMI CEC ENTER 8 11 1 Anynet HDMI CEC What is Anynet Anynet is a function that enables you to control all connected Samsung devices that support Anynet with your Samsung product remote The Anynet system can be used only with Samsung devices that have the Anynet feature To be sure your Samsung device has this feature check if there is an Anynet logo on it WZ e You can only control Anynet devices using the product remote control not the buttons on the product e The product remote control may not work under certain conditions If this occurs reselect the Anynet device e The Anynet functions do not opera
12. 920 0 O 8856 6 498 2 2 5345 5 209 9 All drawings are not necessarily to scale Some dimensions are subject to change without prior notice Refer to the dimensions prior to performing installation of your product Not responsible for typographical or printed errors 1 Preparations 34 Preparations Installing the Wall Mount 1 4 1 Preparing before installing Wall Mount To install a wall mount from another manufacturer use the Holder Ring 1 4 2 Installing the Wall Mount Kit The wall mount kit Sold separately allows you to mount the product on the wall For detailed information on installing the wall mount see the instructions provided with the wall mount We recommend you contact a technician for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own 1 4 3 Wall Mount Kit Specifications VESA WZ Install your wall mount on a solid wall perpendicular to the floor Before attaching the wall mount to surfaces other than plaster board please contact your nearest dealer for additional information If you install the product on a ceiling or slanted wall it may fall and result in severe personal injury Preparations Standard dimensions for wall mount kits are shown in the table below e Samsung wall mount kits contain
13. Auto Motion Plus to clear This mode is suitable to display vivid images e Standard Set the level of Auto Motion Plus to standard e Smooth Set the level of Auto Motion Plus to smooth This mode is suitable to display smooth images e Custom Customize the level of screen burn in or flickering e Demo This function demonstrates the technology of Auto Motion Plus The result when the mode is changed can be previewed on the left side of the window Brightness Sensor Enable or disable the Brightness Sensor for the selected display device The Brightness Sensor detects the ambient light intensity and automatically adjusts the screen brightness WZ Brightness Sensor may not be available depending on the product Using MDC Size Home Picture Sound System Tool 1 gt Dynamic Contrast Auto Motion Plus Stan v Picture Size 16 9 a IGamma Control Brightness Sensor Off Detail ked Picture Size Adjust the screen size for the selected display device The Detail item will be disabled if Picture Size is set to a mode that does not support detailed configuration The buttons can be used to adjust Zoom The screen can be relocated using the up down left right buttons Detail You can view details of the selected screen size PC Screen Adjustment Frequency adjustment or fine tuning is available by using the buttons in Coarse or Fine To relocate the screen click on
14. EOE Ein compatible with the product Then change the screen settings if required by referring to the Additional Information on the product menu and the Standard Signal Mode Table The screen is too bright The screen is too Adjust Brightness and Contrast dark Screen color is inconsistent Go to Picture and adjust the Color Temp settings The colors on the screen have a shadow and Go to Picture and adjust the Color Temp are distorted settings White does not really look white Go to Picture and adjust the Color Temp settings There is no image on the screen and the power The product is in power saving mode eee ea ete oreo Press any key on the keyboard or move the mouse to return to the previous screen There is no sound Check the connection of the audio cable or adjust the volume 2 2 Connecting and Using a PC Check the volume The volume is too low Adjust the volume If the volume is still low after turning it up to the maximum level adjust the volume on your PC sound card or software program 11 Troubleshooting Guide 190 Troubleshooting Guide Remote control issue The remote control does not work Make sure that the batteries are correctly in place Check if the batteries are flat Check for power failure Make sure that the power cord is connected Check for any special lighting or neon signs switched on in the vicinity A beeping sound is heard when my PC is If a beeping sound is
15. Reset the system settings Reset All Reset the screen sound and system settings at the same time Edit Column SS S S S HEHRHEE amp amp Be B Select the items you want to display in the list of sets Information View the program information Using MDC 3 6 13 Other Functions Resizing a Window Place the mouse pointer on a corner of the program window An arrow will appear Move the arrow to customize the size of the program window Schedule Using MDC Group Management Creating Groups Multiple Display Control Picture Sound System Tool Input HDMI2 r Volume 100 gt LG annel v LFD Device Edit Group All Device List 01 Add on the samne Level Add on the sub level Rename v Schedule Create groups and manage the list of sets on a group basis ms Duplicate group names cannot be used Right click and select Group gt Edit in the display device list section on the left side of the program window 2 n the Edit Group window displayed click Add on the sub level or Add on the same level e Addon the same level Create a group on the same level as the selected group Fdit Group Using MDC 4 3 Enter the group name Deleting Groups 7 Select a group name and click Edit 2 n the Edit Group window displayed click Delete Edit Group Add on the same Level Add on the sub level Rename 3 Click Yes The grou
16. and DVD Blu ray Disc players 2 1 1 Pre connection Checkpoints e Before connecting a source device read the user manual provided with it The number and locations of ports on source devices may differ from device to device e Donot connect the power cable until all connections are completed Connecting the power cable during connection may damage the product e Connect the sound ports correctly left white and right red e Check the types of ports at the back of the product you want to connect Connecting and Using a Source Device 2 2 Connecting and Using a PC 2 2 1 Connecting to a PC e APC can be connected to the product in a variety of ways Select a connection method suitable for your PC e After connecting the PC connect the power cable 4 Connecting parts may differ in different products a Connection using the D SUB cable Analog type RGB DVI DP HDMI AUDIO IN ox Connection using a DVI cable Digital type RGB DVI DP HDMI AUDIO IN WZ The following images are for reference only Real life situations may differ from what is shown in the images Connecting and Using a Source Device Connection Using an HDMI DVI Cable HDMI IN RGB DVI DP HDMI AUDIO IN When you connect a PC to the product using an HDMI DVI cable set Edit Name to DVI PC to access video and audio content stored
17. and Home Theater products which support BD Wise When BD Wise is turned On the picture mode is automatically changed to the optimal resolution WZ Available when you connect Samsung products that support BD Wise through an HDMI cable to the product 8 10 4 Auto Power Enabling this option will automatically power on the product if the power cable is connected 8 10 5 Standby Control You can set the screen standby mode to be applied when an input signal is received Auto Power saving mode will activate if no input signals are detected even though a source device is connected to the display The message No Signal will appear if no source device is connected e On Power saving mode will activate if no input signals are detected e Off The message No Signal will appear if no input signals are detected 4 o The Standby Control option is only enabled when Source is set to PC or DVI o s If No Signal is displayed although a source device is connected check the cable connection Refer to page 50 for details about connecting source devices 8 10 6 Lamp Schedule Enables the lamp value to be adjusted to a user specified value at a specified time in MDC mode 8 10 7 OSD Display Displays or hides a menu item on the screen e Source OSD No Signal OSD MDC OSD System 8 10 8 Power On Adjustment You can set the warm up time for the screen to turn on after the power button is pressed Range O
18. at such a place Operation A Warning There is a high voltage inside the product Never disassemble repair or modify gt Yeo the product yourself e Afire or electric shock may result e Contact Samsung Customer Service Center for repairs Before moving the product turn off the power switch and disconnect the power cord antenna cable and all other connected cables e Damage to the cord may result in a fire or electric shock If the product generates abnormal sounds a burning smell or smoke disconnect the power cord immediately and contact Samsung Customer Service Center e An electric shock or fire may result Do not let children hang from the product or climb on top of it e Children may become injured or seriously harmed If the product is dropped or the outer case is damaged turn off the power switch and disconnect the power cord Then contact Samsung Customer Service Center Continued use can result in a fire or electric shock Do not leave heavy objects or items that children like toys sweets etc on top of the product e The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury Before Using the Product 8 Before Using the Product During a lightning or thunderstorm remove the power cord and do not touch the antenna cable e Afire or electric shock may result Do not drop
19. be heard more clearly e SRS CS Headphone Off On You can hear virtual 5 1ch surround sound over the headphones e Equalizer The Equalizer displays a series of sliders Use the up and down arrow keys to select a slider Use the left and right arrow keys to change the slider s value To Reset the Equalizer select Reset and press then select Yes and press To exit select Close and then press C4 WZ Equalizer is available in the standard sound mode only o Balance L R Adjusts the balance between the right and left speaker o 100Hz 300Hz 1kKHz 3kHz 10kHz Bandwidth Adjustment Adjusts the level of specific bandwidth frequencies o Reset Resets the equalizer to its default settings 3D Audio UE46A amp UE55A models only MENU I Sound 3D Audio ENTER 5 3 1 3D Audio Off Low Medium High 3D audio technology provides the immersive sound corresponding to the pop up effect of 3D video by audio depth control in perspective e Available in only when watching 3D image 5 Sound Adjustment 114 sound Adjustment 5 4 Speaker Settings MENU I Sound Speaker Settings ENTER e Speaker Select External Internal If you are listening to the sound track of a broadcast or movie through an external receiver you may hear a sound echo caused by the difference in decoding speed between the product speakers and the speakers attached to your audio receiver If this occurs set
20. between the remote sensor and remote control obstacle free Ua O G Po O EG 0 00 Description Selects the input source that an external device is connected to Opens the on screen menu and exits from the menu Also use to exit the OSD menu or return to the previous menu Moves from one menu item to another horizontally or adjusts selected menu values Adjusts the audio volume This multi functional button offers the following two functions Moves from one menu item to another vertically or adjusts selected menu values This multi functional button offers the following two functions lt A P v 2 a a 1 Preparations 24 Preparations a Remote sensor 1 2 2 Reverse Side Use this button for turning the Display on and off Receives signals from the remote To control the remote control in front of the product lower the remote control sensor in the direction of the arrow indicated in the zoomed in image on the previous page WZ Keep the area between the remote sensor and remote control obstacle free The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality IR AMBIENT IR OUT AUDIO OUT RGB DVI DP HDMI AUDIO IN USBe i HDMI IN DVI OUT LOOPOUT SENSOR IN o RS232C IN OUT Supplies power to the exte
21. heard when your PC is booting booting have your PC serviced 11 Troubleshooting Guide 191 Troubleshooting Guide 11 2 Q amp A Question Answer Set the frequency on your graphics card How can change the frequency Windows XP Go to Control Panel Appearance and Themes Display Settings Advanced Monitor and adjust the frequency in Monitor Settings Windows ME 2000 Go to Control Panel Display Settings Advanced Monitor and adjust the frequency in Monitor Settings Windows Vista Go to Control Panel Appearance and Personalization Personalize Display Settings Advanced Settings Monitor and adjust the frequency in Monitor Settings Windows 7 Go to Control Panel Appearance and Personalization Display Adjust resolution Advanced Settings Monitor and adjust the frequency in Monitor Settings 11 Troubleshooting Guide 192 Troubleshooting Guide Question Answer How can change the resolution How do set power saving mode Windows XP Go to Control Panel Appearance and Themes Display Settings and adjust the resolution Windows ME 2000 Go to Control Panel Display Settings and adjust the resolution Windows Vista Go to Control Panel Appearance and Personalization Personalize Display Settings and adjust the resolution Windows 7 Go to Control Panel Appearance and Personal
22. it is recommended that you select the optimum resolution specified for your product e Check the frequency when you exchange a CDT product connected to a PC for an LCD product If the LCD product does not support 85Hz change the vertical frequency to 60Hz using the CDT product before you exchange it with the LCD product The screen will automatically be adjusted if a signal that belongs to the following standard signal modes is transmitted from your PC If the signal transmitted from the PC does not belong to the standard signal modes the screen may be blank with the power LED on In such a case change the settings according to the following table by referring to the graphics card user manual Horizontal Vertical Pixel Clock Sync Resolution Frequency Frequency Polarity H kHz Hz IBM 640 x 350 31 469 70 086 25 175 IBM 720 x 400 31 469 70 087 28 322 IBM 640 x 480 31 469 59 940 25 175 MAC 640 x 480 35 000 66 667 30 240 MAC 832 x 624 49 726 14 551 57 284 MAC 1152 x 870 68 681 75 062 100 000 VESA 640 x 480 31 469 59 940 29o VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 VESA 848 x 480 31 020 60 000 33 750 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 I I NS NS a I I VESA 1024 x 7
23. o Activate power saving mode or a dynamic screen saver if you will not be using the product for an extended period of time e Unlike CDT monitors TFT LCD monitors due to the nature of the panel can be set to only one resolution to obtain the optimum picture quality Therefore setting a resolution other than the specified resolution may degrade the picture quality To avoid this it is recommended that you select the optimum resolution specified for your monitor Appendix 201 Appendix Prevention of Afterimage Burn in What is afterimage burn in Afterimage burn in should not occur when the LCD panel is operating normally Normal operation refers to a continuously changing video pattern If the LCD panel displays a fixed pattern for an extended period of time more than 12 hours a slight voltage difference may occur between the electrodes in pixels that control the liquid crystals Such a voltage difference between electrodes increases with time and makes the liquid crystals thinner When this occurs a previous image can remain on the screen when the pattern changes To prevent this the accumulated voltage difference should be reduced Black Matrix i Common Color Filter Electrode ITO Bii Drain f Storage Gate Pixel Electrode ITO Capaccitor Cs TFT Data Bus Line 4 4 4 4 Appendix 202 Appendix e Powering Off Screen Saver and Power Saving Mode o Power off t
24. of a selected connection There can be a maximum of 100 LFDs in a connection The Set ID is assigned sequentially in the daisy chain running from 1 to 99 and then finally to Set ID O v LED Device v Schedule Using MDC 3 6 4 Cloning Using the Cloning feature you can copy the setting of one LFD and apply it to multiple selected LFDs You can select specific tab categories or all tab categories for cloning using the copy setting option window Sound System LFD Device All Device List 10 107 108 89 148 107 108 89 148 107 108 89 148 107 108 89 148 107 108 89 148 107 108 89 148 107 108 689 148 107 108 89 148 107 108 89 148 Using MDC 3 6 5 Command Retry This feature is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD The retry count value can be set using the MDC options window The retry count value must be between 1 10 The default value is 1 Multiple Display Control Home Picture Sound System Lesemad 1 maisa _ Panel Control On Za Ao 1Remote Control Disable lf meika ie NM a Ti v LED Device All Device List 10 107 108 689 148 107 108 69 148 107 108 869 148 See ae ii 107 108 89 148 Eror Status Interval rin jos se Tenis Group NEE EN Bog Fn ae i 107 108 869 148 MailAen Intera min 010 s OS ReiS j 107 108 869 148 107 108
25. resolution cannot be played Check the vertical and horizontal resolution of the file Video that does not contain audio data is not supported Check that the video file contains audio data Check the supported video and audio Codec types and Versions Check the supported file versions o Flash version up to 10 1 is supported o PowerPoint version up to 97 2007 is supported Content with a size of 2GB or larger cannot be assigned to Network Schedule 10 1 1 Video Audio File Frame Bit rate Audio Container Video Codec Resolution DivX 311 4 1 MASTS aooo e a 60 AVI MKV 1 LPCM eer Hoes eae MPEGA SP ASP 1920x1080 o 6x9 o seo Core me a 2s 5 LPCM w oro a wanes won eno 8 wmv ASE ene 1920x1080 6 30 25 WMA Video v9 DVX 3M 4x 51 oy anon 6 30 60 asl ASF 10 Magicinfo Lite 164 y Magiclnfo Lite File Frame Bit rate Audio H 264 H264 BP MP HP 1920x1080 66 30 a ADPCM ie 2618p p HP 1204080 ETSEN APOM AAC AAC rer uj aca wea MPEG2 1920x1080 24 25 30 B LPCM E AC3 MPEG 7 mo aean osm Video Video content without audio is not supported 3D video is not supported Content with a resolution larger than the resolution specified in the table above is not supported Video content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy video during playback H 264 Level 4 1 or lower is
26. s user s guide 7 4 Magiclnfo Lite Settings MENU D Network Magicinfo Lite Settings ENTER C Server Setting the Magiclnfo Lite server IP o Enter the server IP address and port number o Use 7001 as the port number K If unable to connect to the server using port number 7001 check with your server administrator to find the correct port number and then change the port number FTP Mode o Select an FTP operating mode Active or Passive Default Storage o Specify the default memory to save schedules or content sent from the server to o lf the default storage space is set to USB a schedule will not run if a USB device is not connected o Send a notification message to the server when internal memory is used up 2 Storage 7 Network EEL Network e Internal Memory Displays the space currently being used or deletes all content e USB Displays the space currently being used Slideshow e Image Viewer Time Sets the time length you want to display images played from Local Schedule or by one of the auto playback functions e PPT Viewer Time Sets the time length you want to display each page of a document file played from Local Schedule or by one of the auto playback functions e Image Effect Configures the image transition effects o Fade Fade2 Blind Spiral Checker Linear Stairs Wipe Random None Schedule Name e Select a schedule title format when creating a local schedule o YYYYMMDD YYY
27. source device in Edit Name to obtain optimal picture quality WZ The list can include the following source devices Source devices on the list differ depending on the selected source o VCR DVD Cable STB Satellite STB PVR STB AV Receiver Game Camcorder PC DVI PC DVI Devices TV IPTV Blu ray HD DVD DMA WZ Available settings in the Picture menu depend on the current source and settings made in Edit Name e When connecting a PC to the HDMI IN port with HDMI cable you should set the product to PC mode under Edit Name e When connecting a PC to the HDMI IN port with HDMI to DVI cable you should set the product to DVI PC mode under Edit Name e When connecting an AV devices to the HDMI IN port with HDMI to DVI cable you should set the product to DVI Devices mode under Edit Name 6 6 3 Information MENU Media Source TOOLS Information ENTER You can see detailed information about the selected external device 6 6 4 Refresh MENU II Media Source TOOLS Refresh gt ENTERIC In the Source If the external devices are not displayed press the TOOLS button to select Refresh Search for connected devices 6 Media 128 6 7 Media AllShare MENU I Media AllShare ENTER C AllShare connects your product and compatible Samsung mobile phones devices through a network You can play media contents including videos photos and music saved on you
28. the D play or C8 button 3 Press the TOOLS button and then press the lt or gt button to select Scene Search A pop up screen appears 4 Press the lt or gt button to select a chapter you want to view Playback will start from the chapter you selected 6 3 Media Photos MENU I Media Photos ENTER C Connecting a USB Device Turn on your product 2 Connect a USB device containing photo music and or movie files to the USB port on the back or side panel of the product 3 When a USB device is connected to the product the Connected Device screen appears Select a connected device and then press 6 3 1 Viewing a Photo or Slide Show Press the lt A button to select the desired file in the file list 2 Press the button e To view files manually one at a time press the left or right arrow buttons e To start the slide show press the gt Play button when the file you selected is displayed e During the slide show all files in the file list are displayed in order starting from the file you selected WZ When you press the gt Play button in the file list the slide show will start immediately e During a Slide Show press the TOOLS button to access additional functions such as Slide Show Speed Background Music Zoom and Rotate e You can add background music to a slide show if you have music files on your USB device or PC by setting Background Music
29. the sequence if no video is found source AutoSwitch Settings ea A te iin U JAI NING VA LN AS Jil Primary Source Secondary Source Press A V to select the option you want and press C Primary Source Specify Primary Source for the automatic input source Secondary Source Specify Secondary Source for the automatic input source System 8 10 General MENU I System General ENTER General Game Mode ii SDS On Auto Power ii Standby Control Lamp Schedule OSD Display 8 10 1 Max Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time 8 10 2 Game Mode When connecting to a game console such as PlayStation or Xbox you can enjoy a more realistic gaming experience by selecting game mode mi Precautions and limitations for Game Mode o To disconnect the game console and connect another external device set Game Mode to Off inthe System menu o If you display the product menu in Game Mode the screen shakes slightly e Game Mode is not available when the input source is set to PC e After connecting the game console set Game Mode to On Unfortunately you may notice reduced picture quality If Game Mode is On o Picture Mode is set to Standard and Sound Mode is set to Movie System 8 10 3 BD Wise Provides the optimal picture quality for Samsung DVD Blu ray
30. the Music screen press the 4 gt A V button to select Edit Mode and then press the Ce button e A check box appears to the left of the files Press the q gt A button to select the tracks you want to add and then press the button e A check appears in the check box Repeat Step 2 to select additional tracks e To select all the files in the current page select Select All at the top of the page and then press Ca Press the lt gt A W button to select Add to My Playlist e Note that selecting Clear My Playlist will return My Playlist to the default playlist and remove all the tracks you added Press the C button The message Selected items were added to My Playlist is displayed The newly created or updated playlist will be in the main Music page 6 Media 122 Media Playing My Playlist Select the My Playlist folder and it will play automatically Press the A or W button to play a different music file within the play list We To delete a file from My Playlist select the recycle bin icon next to the file you want to delete by using the direction buttons and then press The file will be deleted from My Playlist Playing Selected Music Files 2 On the Music screen press the 4 gt A V button to select Edit Mode on the far right side of the screen and then press the F button Press the lt A W button to select the desired music file in the file list and
31. the product screen Press the A or W button to adjust the Vertical Position Press the lt or gt button to adjust the Horizontal Position Image Reset Resets the image to the default settings 4 3 4 Resolution Select If the picture is not normal even when the resolution of the graphics card is one of the following you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu Available resolutions Off 1024 x 768 1280 x 768 1360 x 768 1366 x 768 mi The Resolution Select option is only enabled when the input source is PC a 4 Screen Adjustment 102 4 4 4 5 Screen Adjustment Auto Adjustment MENU Picture Auto Adjustment ENTER Adjust frequency values positions and fine tune the settings automatically We This option is available when the input source is PC Using the 3D function UE46A amp UE55A models only MENU Picture 3D ENTER 4 5 1 3D Mode This exciting new feature enables you to view 3D content In order to fully enjoy this feature you must purchase a pair of Samsung 3D Active Glasses to view 3D video 4 5 2 Viewing product Using the 3D function IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES Read and understand the following safety information before using the 3D function A Warning Oo Some viewers may experience discomfort while viewing 3D product such as dizziness nausea and headac
32. the product to External mi o When you set Speaker Select to External the product speakers are turned off You will hear sound through the external speakers only Sound will be audible only from the external speakers if external soeakers are connected when Speaker Select is set to Internal o If there is no video signal both the product speakers and the external speakers will be mute e Auto Volume Off Normal Night Normal equalizes the volume level on each channel so that when you change channels the volume level is the same Night equalizes and decrease the volume level on each channel so each channel is quieter Night is useful at night when you may want to keep the volume low WZ To use the volume control of a connected source device set Auto Volume to Off A change to the volume control of the connected source device may not be applied if Auto Volume is set to Normal or Night 5 5 Reset Sound MENU I Sound Reset Sound ENTER Reset all sound settings to the factory defaults Select Reset Sound press ENTER select Yes in the pop up and then press ENTER again 5 Sound Adjustment 115 6 1 Media MagiclInfo Lite MENU 1 Media Magiclnfo Lite ENTER C wit Press the Magiclnfo Lite button on the remote control 6 1 1 Magiclnfo Lite Player Guide Magiclnfo Lite Player allows you to play content image video document files at a desired time You can play conten
33. then button e The v mark appears to the left of the selected files Repeat Step 2 to select additional tracks e 10 select all the files in the current page select Select All at the top e To cancel a selection press the C button again Press the lt gt A W button to select Play at the bottom of the screen and then press C4 The selected music files play 6 Media 123 Media 6 5 Videos Photos Music Additional Functions 6 5 1 Sorting the file lists To sort files in the file lists select the 9 Sorting icon in the top right of the screen by using the lt p gt A V button Then press the C button The checks below indicate which media the sort criteria apply to Folder view Displays the whole folder You can view the file v Sf lt name and thumbnail by selecting the folder Title Sorts and displays the file title in Symbol Y lt I T Number Alphabet Special order Latest Date Sorts and shows files by the latest date xs Earliest Date Sorts and shows files by the earliest date xs Monthly Sorts and shows photo files by month A Sorts the music file by artist in alphabetical ah order Album Sorts the music file by album in alphabetical v order 6 Media 124 Media 6 5 2 Videos Photos Music Play Option menu When playing video or photo files you can press the TOOLS button to display an Options menu Below are a series of tables listing the options available and the media each o
34. to On in the Tools menu and then selecting music files to play e The Background Music cannot be changed until the BGM has finished loading e You can use the Pause Stop and Play buttons on the bottom of your remote during a slide show e When you press the Stop or Return button the slide show stops and the main photo screen re appears e Pressing the MENU button when content from a USB device is playing will stop the playback and return you to the previous input mode 6 Media 121 6 4 Media Music MENU I Media Music ENTER C Connecting a USB Device 1 2 3 Turn on your product Connect a USB device containing photo music and or movie files to the USB port on the back or side panel of the product When a USB device is connected to the product the Connected Device screen appears Select a connected device and then press C 6 4 1 Playing Music 1 2 Press the 4 gt A V button to select the desired music file in the file list Press the button or gt Play button e When the music is playing you can search using the 4 REW and p gt FF button e Ifthe sound is abnormal when you play MP3 files adjust the Equalizer in the Sound menu An over modulated MP3 file may cause a sound problem e Pressing the MENU button when content from a USB device is playing will stop the playback and return you to the previous input mode Creating My Playlist 1 On
35. you adjust the screen depth by selecting a black level Normal Low 4 Available only in HDMI mode a 4 7 6 Film Mode Sets the product to automatically sense and process film signals from all sources and adjust the picture for optimum quality e Off Autol Auto2 mis Available in HDMI 480i 1080i 4 7 Auto Motion Plus Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer picture WZ e The menu names may vary depending on the country e This function is supported on ME55A UE46A and UE55A models only This feature can be used to view fast moving scenes Screen Adjustment e Off Switches Auto Motion Plus off e Clear Sets Auto Motion Plus to Clear Suitable for viewing moving images clearly mode e Standard Sets Auto Motion Plus to Standard mode e Smooth Sets Auto Motion Plus to Smooth suitable for viewing moving images naturally mode e Custom Use to reduce the afterimage and judder as much as you want e Demo Demonstrates Auto Motion Plus the picture will be displayed on the left half of the screen when Auto Motion Plus is set to on e Blur Reduction Use to reduce the afterimage as much as you want WZ This is only supported if the Auto Motion Plus is set to Custom e Judder Reduction Use to reduce the judder as much as you want WZ This is only supported if the Auto Motion Plus is set to Custom e Reset Restore Auto Motion Plus
36. 00 screens horizontal and vertical screens multiplied For example if the horizontal arrangement is set to 15 a maximum of 6 displays can be assigned to the vertical arrangement Conversely if the vertical arrangement is set to 15 a maximum of 6 displays can be assigned to the horizontal arrangement e The Screen Position option is only enabled when Video Wall is set to On 8 8 4 Vertical This function automatically divides the screen according to the specified number of vertical displays Enter the number of vertically arranged displays The vertical screen will automatically be divided according to the number entered A maximum of 15 displays can be assigned to the vertical arrangement F e he screen can be divided into a maximum of 100 screens horizontal and vertical screens multiplied For example if the horizontal arrangement is set to 15 a maximum of 6 displays can be assigned to the vertical arrangement Conversely if the vertical arrangement is set to 15 a maximum of 6 displays can be assigned to the horizontal arrangement e The Screen Position option is only enabled when Video Wall is set to On 8 8 5 Screen Position You can customize the arrangement of split screens by moving displays identified with a number using the Screen Position function Select Screen Position to display the arrangement of displays identified with a number specified according to the Horizontal or Vertical settings To customize the arrang
37. 189 192 SPECIFICATIONS 194 196 197 199 Local Schedule Local Schedule Manager Registering a Local Schedule Modifying a local schedule Local Schedule Deleting a local schedule Local Schedule Running a local schedule Local Schedule Stopping a local schedule Local Schedule Viewing the details of a local schedule Local Schedule Contents Manager Copying content Deleting content Internal AutoPlay Running Internal AutoPlay USB AutoPlay Running Internal AutoPlay When Content is Running Viewing the details of the content that is running Changing the settings for the content that is running Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution and Frequency Check the followings Q amp A General PowerSaver Preset Timing Modes License Table Of Contents APPENDIX 200 INDEX 201 201 202 204 Contact SAMSUNG WORLDWIDE Optimum Picture Quality and Afterimage Burn in Prevention Optimum Picture Quality Prevention of Afterimage Burn in Terminology Preparations 1 1 Checking the Contents 1 1 1 Removing the Packaging 7 Remove the black locking device at the bottom of the box 3 Check the components and remove the styrofoam and plastic bag writ The appearance of actual components may differ from the image shown as WZ This image is for reference only a 4 Store the box in a dry area so that it can be used w
38. 2 If the input source is HDMI e Dynamic This mode is suitable when the ambient light is bright e Standard This mode is generally suitable for any environment e Natural Suitable for reducing eye strain e Movie This mode reduces eye fatigue 4 2 4 3 Screen Adjustment Backlight Contrast Brightness Sharpness Color Tint G R MENU J Picture gt ENTER Your product has several options for adjusting picture quality Select an option using the A and W buttons and then press C Use the arrow keys to adjust the option value or select an option setting When done press WZ e When you make changes to Backlight Contrast Brightness Sharpness Color or Tint G R the OSD will be adjusted accordingly e When connecting a PC you can only make changes to Backlight Contrast Brightness and Sharpness e You can adjust and store settings for each external device you have connected to an input on the product e Lowering picture brightness reduces power consumption Screen Adjustment MENU I Picture Screen Adjustment ENTER Screen Adjustment provides various picture size and aspect ratio options Select an option using the A and W buttons and the press Use the arrow keys to select an option in the sub menu and then press C4 Different Screen Adjustment options are displayed depending on the current input source screen Adjustment E Position PC Scre
39. 2 Position Adjusts the picture position Position is only available if Picture Size is set to Zoom1 Zoom2 Wide Fit Screen fit or Custom To use the Position function after selecting Zoom1 Zoom2 or Wide Fit follow these steps Press the W button to select Position 2 Press the button 3 Press the A or W button to move the picture up or down 4 Press the button 4 Screen Adjustment 101 Screen Adjustment 5 Select Close by pressing the A and W buttons sequentially To reset the picture position press Reset To use the Position function after selecting Screen Fit in HDMI 1080i 1080p or Custom follow these steps Press the W button to select Position Press the button 2 3 Press the A W lt 4 p button to move the picture 4 Press the button o Select Close by pressing the A and W buttons sequentially WZ If you want to reset the picture to its original position select Reset in the Position screen The picture will be set to its default position 4 3 3 PC Screen Adjustment WZ Available in PC mode only Coarse Fine Removes or reduces picture noise If the noise is not removed by Fine tuning alone use the Coarse function to adjust the frequency as best as possible Coarse and Fine tune again After the noise has been reduced re adjust the picture so that it is aligned with the center of screen Position To adjust the PC s screen position if it is not centered or does not fit
40. 68 60 023 15 029 18 750 VESA 1152 x 864 67 500 75 000 108 000 VESA 1280 x 768 47 176 59 870 79 500 12 Specifications pa Specifications Horizontal Vertical Sync Pixel Clock Resolution Frequency Frequency MHz Polarity H kHz Hz VESA 1280 x 960 60 000 60 000 108 000 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1360 x 768 47 712 60 015 85 500 VESA 1920 x 1080 67 500 60 000 148 500 V VESA 1920 x 1080 66 587 59 934 138 500 Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle The reciprocal number of a horizontal cycle is called horizontal frequency Horizontal frequency is measured in kHz Vertical Frequency The product displays a single image multiple times per second like a fluorescent light to display what the viewer sees The rate of a single image being displayed repeatedly per second is called vertical frequency or refresh rate Vertical frequency is measured in Hz 12 Specifications 198 ai Specifications 12 4 License S Ss O TheaterSound HD SRS and symbol are trademarks of SRS Labs Inc QO TheaterSound HD technology is incorporated under license form SRS Lab Inc TheaterSound HD DE DOLBY Manufactured under license from Dolby Laboratories Dolby and the double DIGITAL PLUS D symbol aretrademarks of Dolby Laboratories PULSE i ts Manufactured under license under U S Pate
41. 869 148 107 108 689 148 Bontot ntk ae 0 D 0 SO amp POE N v Schedule Using MDC 3 6 6 Getting Started with MDC 1 To start the program click Start Programs Samsung MDC Unified v Schedule 2 Click Add to add a display device e Ifthe connection is established via RS232C go to Serial and specify the COM Port Add Connection SET ID Range Using MDC e If the connection is established via Ethernet enter the IP that was entered for the display device Using MDC 3 6 7 Main Screen Layout Multiple Display Control Picture Sound System Tool J input AChannel Me ORR SECT TSE ee Poerrrreres reat v LFD Device All Device List 00 v Schedule Using MDC 3 6 8 Menus You can power on or off a selected device or change the input source or volume of the device Choose display devices from the list of sets and select the Home tab Picture Sound System Tool ry 1 2 nput HDMI hi olume k Home Select an item and change the corresponding setting Power e On Power on a selected display e Off Power off a selected dis Input e Input Source Change the input source WZ o Input sources available can vary depending on the Display Device Models o The input source can be changed only for displays that are turned on e Channel Change the channel WZ o The TV channel can be changed by using the up down arrow keys 4
42. B flash drive into the USB port of the product In the product menu go to Support Software Upgrade Select By USB NOOA WZ Please be careful not to remove the USB drive until the upgrade is complete a 9 1 2 Alternative Software The Alternative Software option lets you upgrade using a file the product downloaded earlier but you decided not to install immediately or a file downloaded by the product in Standby Mode To upgrade By Alternative Software follow these steps 1 If upgrade software has been downloaded you will see the software version number to the right of Alternative Software 2 Select Alternative Software and then press the C button 3 The product displays a message asking if you want to upgrade Select Yes The product begins the upgrade 4 When the upgrade is complete the product turns off automatically and then turns on 9 Support 162 Support 9 2 Contact Samsung MENU Support Contact Samsung ENTER View this information when your product does not work properly or when you want to upgrade the software You can find information regarding our call centers and how to download products and software y Magiclnfo Lite File Formats Compatible with Magiclnfo Lite Player Read before using Magiclnfo Lite Player Supported USB device file systems include FAT16 and FAT32 NTFS is not supported A file with a vertical and horizontal resolution larger than the maximum
43. Before calling Samsung Customer Service Center test your product as follows If the problem persists contact Samsung Customer Service Center Check if your product is operating normally by using the product test function If the screen remains blank while the power LED blinks even when the product is correctly connected to a PC perform product testing Power off both the PC and product Disconnect all the cables from the product Power on the product KR HB If No Signal is displayed the product is operating normally WZ If the screen remains blank check the PC system video controller and cable 11 1 2 Checking the Resolution and Frequency Not Optimum Mode will briefly be displayed if a mode that exceeds a supported resolution is selected refer to Supported Resolutions Troubleshooting Guide 11 1 3 Check the followings Installation issue PC mode The screen keeps switching on and off Blank spaces are found on all four sides of the screen when an HDMI or HDMI DVI cable is connected to the product and PC Check the cable connection between the product and PC and ensure the connection is secure 2 2 Connecting and Using a PC The blank spaces found on the screen have nothing to do with the product Blank spaces on the screen are caused by the PC or graphics card To resolve the problem adjust the screen size in the HDMI or DVI settings for the graphics card If the graphics car
44. ED is pointing down Preparations 1 3 2 Ventilation 1 Installation on a Perpendicular Wall B Vj Figure 1 1 Side view A Minimum 40 mm B Ambient temperature Under 35 C e When installing the product on a perpendicular wall allow at least 40mm of space between the product and wall surface for ventilation and ensure that the ambient temperature is kept below 35 C Preparations 2 Installation on an indented Wall WZ Contact Samsung Customer Service Center for further details Plane view Minimum 40 mm Minimum 70 mm Minimum 50 mm c Uy Minimum 50 mm YY Ambient temperature Under 35 C Figure 1 2 Side view When installing the product on an indented wall allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35 C 3 Installation in an Indented Floor ms Contact Samsung Customer Service Center for further details A Minimum 50 mm B Ambient temperature Under 20 GC N Figure 1 3 Side view When installing the product in an indented floor allow at least 50mm of space between the product and floor surface for ventilation and ensure that the ambient temperature is kept below 20 C 1 Preparations 33 Preparations 1 3 3 Dimensions E O O ry SET Dimension W x D x H mm Unit mm Model name Without STAND ME40A
45. External Monitor Se Connecting to an Audio System 59 Changing the Input source 59 Source 60 Connecting the network box 60 MagiclInfo USING MDC 64 Configuring Settings for Multi Control 64 Configuring settings for Multi Control 64 Communicate with MDC via the RS232C stereo cable 65 Communicate with LAN cable 65 Communicate with Stereo cable via the LAN cable 66 MDC Program Installation Uninstallation 66 Installation 66 Uninstallation Table Of Contents 66 What is MDC 67 Connecting to MDC 68 Connection Management 69 Auto Set ID 70 Cloning 71 Command Retry 2 Getting Started with MDC 14 Main Screen Layout KS Menus T Screen Adjustment 81 Sound Adjustment 82 System Setup 90 Tool Settings 92 Other Functions 97 Troubleshooting Guide SCREEN ADJ USTM ENT 99 Picture Mode 99 If the input source is PC DVI or DP 99 If the input source is HDMI 100 Backlight Contrast Brightness Sharpness Color Tint G R 100 Screen Adjustment 101 Picture Size 101 Position 102 PC Screen Adjustment 102 Resolution Select 103 Auto Adjustment 103 Using the 3D function UE46A amp UE55A models only ORS 3D Mode 103 Viewing product Using the 3D function Table Of Contents 107 107 107 107 10y 108 108 108 108 108 109 WOKS 109 109 110 110 111 tale ill 111 al alia 112 SOUND ADJUSTMENT 113 114 114 114 115 115 MEDIA 116 late Advanced S
46. Supported H 264 FMO ASO RS VC1 SP MP AP L4 AVCHD are not supported XVID MPEG4 SP ASP o 1280 x 720 or smaller Max 60 frames Larger than 1280 x 720 Max 30 frames GMC 2 or higher is not Supported 10 Magicinfo Lite 165 y Magiclnfo Lite Audio Audio content without video is not supported Only mp3 files are supported as background music for image PPT slideshows This feature is available only when using the network schedule menu Audio content with a Bit rate or Frame rate larger than the rate specified in the table above can cause choppy audio during playback WMA 7 8 9 STD or lower is supported WMA 9 PRO does not support lossless audio and multi channel audio higher than 2 channels WMA sampling rate 22050Hz mono is not supported Image Compatible image file format Jpeg Supported maximum resolution 15 360 x 8640 Supported image effects 8 effects Fadel Fade2 Blind Spiral Checker Linear Stairs Wipe Flash Compatible with Flash 10 1 Flash Animation o Compatible file format SWF Resolution 1280 x 720 o Caution Performance comparable to Flash Player on a Windows operating system cannot be guaranteed Optimization is needed during content creation Flash Video o Compatible file format FLV o Video Codec H 264 BP Resolution 1920 x 1080 Audio Codec H 264 BP Caution FAV file format is not supported Screen Video is not supported 10 Magic
47. The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance BN46 00103B 02 Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality 2011 Samsung Electronics Samsung Electronics owns the copyright for this manual Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics Microsoft Windows and Windows NT are registered trademarks of Microsoft Corporation VESA DPM and DDC are registered trademarks of the Video Electronics Standards Association Ownership of all other trademarks is attributed to their due owner Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched Take the following steps when cleaning WZ The following images are for reference only Real life situations may differ from what is shown in the nad images S 1 Power off the product and computer ae 2 Disconnect the power cord from the product K Hold the power cable by the plug and do not touch the cable with wet hands Otherwise an electric shock may result 3 Wipe the product with a clean soft and dry cloth e Do not use detergents that contain alc
48. Using the Product Electricity and Safety WZ The following images are for reference only Real life situations may differ from what is shown in the images A Warning Do not use a damaged power cord or plug or a loose power socket e An electric shock or fire may result Do not use multiple products with a single power socket e Overheated power sockets may cause a fire Do not touch the power plug with wet hands Otherwise an electric shock may result Insert the power plug all the way in so it is not loose e An unsecure connection may cause a fire Connect the power plug to a grounded power socket type 1 insulated devices only e An electric shock or injury may result Do not bend or pull the power cord with force Be careful not to leave the power cord under a heavy object e Damage to the cord may result in a fire or electric shock Do not place the power cord or product near heat sources e Afire or electric shock may result Clean any dust around the pins of the power plug or the power socket with a dry cloth e A fire may result Before Using the Product 5 Before Using the Product A Caution Installation A Warning Do not disconnect the power cord while the product is being used e The product may become damaged by an electric shock Only use the power cord provided with your product by Samsung Do not use the
49. YDDMM or DDMMYYYY Safely Remove USB e Safely removes USB memory Information e Device Name Displays the name of a device recognized by the server e Serial Number Displays the original identification number of a device e Software Version Displays the software version of a device Refer to page 116 for details about the MagiclInfo Lite Player Guide menu 8 1 System Multi Control MENU I System Multi Control gt ENTER Assign an individual ID to your product 8 1 1 Configuring settings for Multi Control e MDC Connection Select a method to connect to MDC to receive the MDC signal o RS232C MDC Communicate with MDC via the RS232C stereo cable o RJ45 MDC Communicate with MDC via the RJ45 cable e ID Setup Assign an ID to a set Range 0 99 Press A or W to select a number and press C4 e ID Input Enter the ID number of the product connected to the input cable for input signal reception Enter the number you want using the number buttons on the remote control 4 Refer to page 64 for details about the MDC menu A 8 2 System Time MENU I System Time ENTER You can configure Clock Set or Sleep Timer You can also set the product to automatically turn on or off at a specified time using the Timer function 8 2 1 Clock set Set the clock to use the various various timer features of the product 4 mi If you disconnect the power cord you have to set the clock again
50. a detailed installation manual and all parts necessary for assembly are provided e Do not use screws that do not comply with the VESA standard screw specifications e Do not use screws that are longer than the standard length or do not comply with the VESA standard screw specifications Screws that are too long may cause damage to the inside of the product e For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications e Do not fasten the screws too firmly This may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents e Samsung is not liable for product damage or personal injury when anon VESA or non specified wall mount is used or the consumer fails to follow the product installation instructions e Do not mount the product at more than a 15 degree tilt e Always have two people mount the product on a wall VESA screw hole Product size in inches specs A B in millimeters Standard Screw Quantity 32 40 200 X 200 M8 4 46 55 400 X 400 Do not install your Wall Mount Kit while your product is turned on It may result in personal injury due to electric shock 1 Preparations 36 Preparations 1 5 Remote Control RS232C 1 5 1 Cable Connection a TxD No 2 RxD No 3 GND No 5 e Pin assignment Pearc
51. aking fine adjustments to the hue and saturation e Off Red Green Blue 4 6 7 Color Space Adjusts the range and variety of color the color space available to create images e Auto Native Custom WZ To adjust Color Red Green Blue and Reset set Color Space to Custom 4 6 8 White Balance Adjust the colour temperature for a more natural picture e R Offset G Offset B Offset Adjust each color red green blue darkness e R Gain G Gain B Gain Adjust each color red green blue brightness e Reset Resets the White Balance to it s default settings 4 6 9 10p White Balance Off On Controls the white balance in 10 point interval by adjusting the red green and blue brightness e Interval Select interval to adjust e Red Adjust the red level 4 Screen Adjustment 108 Screen Adjustment e Green Adjust the green level e Blue Adjust the blue level e Reset Resets the 10p White Balance to its default settings WZ e Available when the Picture Mode is set to Movie and when the external input is set to all input e Some external devices may not support this function 4 6 10 Flesh Tone Emphasize pink Flesh Tone 4 6 11 Edge Enhancement Off On Emphasize object boundaries 4 6 12 Motion Lighting Off On Reduces power consumption by reducing screen brightness when the picture on the screen is in motion 4 6 13 LED Motion Plus Off On Removes blur and judder from sc
52. an extended period of time as it will become hot Store small accessories out of the reach of children Exercise caution when adjusting the product angle or stand height e Your hand or finger may get stuck and injured e Tilting the product at an excessive angle may cause the product to fall and an injury may result Do not place heavy objects on the product e Product failure or personal injury may result Table Of Contents BEFORE USING THE PRODUCT Copyright Cleaning Storage Safety Precautions Symbols Electricity and Safety Installation Operation o 0o oA A W WO N PREPARATIONS 21 Checking the Contents 21 Removing the Packaging 22 Checking the Components 24 Parts 24 Control Panel 25 Reverse Side 27 Anti theft Lock 28 Remote Control 31 Before Installing the Product Installation Guide 31 Tilting Angle and Rotation o2 Ventilation 34 Dimensions 35 Installing the Wall Mount 35 Preparing before installing Wall Mount 2 Installing the Wall Mount Kit 35 Wall Mount Kit Specifications VESA 37 Remote Control RS232C or Cable Connection 39 Control Codes CONNECTING AND USING 50 Before Connecting A SOURCE DEVICE Pre connection Checkpoints Table Of Contents 51 Connecting and Using a PC ol Connecting to a PC 54 Changing the Resolution 56 Connecting to a Video Device 56 Connection Using an HDMI DVI Cable one Connection Using an HDMI Cable 58 Connecting an
53. ause a fire Do not install the product in a vehicle or a place exposed to dust moisture water drips etc oil or smoke e Afire or electric shock may result Do not expose the product to direct sunlight heat or a hot object such as a stove e The product lifespan may be reduced or a fire may result Do not install the product within the reach of young children e The product may fall and injure children e As the front is heavy install the product on a flat and stable surface Do not drop the product while moving e Product failure or personal injury may result Do not set down the product on its front e The screen may become damaged When installing the product on a cabinet or shelf make sure that the bottom edge of the front of the product is not protruding e he product may fall and become damaged and or cause an injury e Install the product only on cabinets or shelves of the right size Before Using the Product Before Using the Product Set down the product gently e Product failure or personal injury may result Installing the product in an unusual place a place exposed to a lot of fine particles chemical substances or extreme temperatures or an airport or train station where the product should operate continuously for an extended period of time may seriously affect its performance e Be sure to consult Samsung Customer Service Center if you want to install the product
54. be assigned to V if 15 is assigned to H V Select the number of vertical display devices A maximum of 15 displays can be arranged in a row WZ A maximum of 6 can be assigned to V if 15 is assigned to H Screen Position View the layout of displays configured by the screen divider or change the layout as required Screen Position and Preview are enabled when Video Wall is set to on Note that if multiple sets are selected Preview is enabled only if the settings for H and V match the layout of the selected sets To change the Position select a set and drag it to a new position WZ The range of screen divider settings may differ depending on the model Using MDC PIP Basic information required to adjust PIP will appear in the menu screen WZ PIP will be disabled when Video Wall is ON Note that Picture Size is disabled when PIP is ON Picture Sound I 1PIP Size Ii LPIP SOUrCE PIP Size View the PIP Size of the current display PIP Source Select a PIP input source Sound Select Select and enable the sound from either the primary screen or secondary screen Channel The channel can be changed if PIP Source is TV Using MDC General Picture Sound i m Tool User Auto Color Fan Control Man Safety Lock User Auto Color Automatically adjust the screen colors WZ Available only in PC mode Auto Power Set the product to automatically power on Standby Contr
55. ces WZ Pressing the INFO button on the remote when a network schedule is running will display the details of the schedule Check that the correct device has been selected by viewing the device ID in the details Enter the information required to approve the device Lie Cheyvice Ware Liuger rei Lie Dane e Device Name Enter the device name e Device Model Name Select your device model e Device Group Select to specify the group Location Enter the current location of the device I Aaja Selected 10 Magiclinfo Lite MagiclInfo Lite 8 Select the View All Lite Device menu to check that the device has been registered m boned t g 9 When the device is approved by the server the schedule registered in the selected group will be downloaded to the device The schedule will run after it is downloaded WZ e For further details on how to configure a schedule refer to the lt Magiclnfo server user s manual gt e Ifa device is deleted from the list of devices approved by the server the device will reboot to reset its settings y MagiclInfo Lite 10 2 4 Setting the current time A schedule may not run if the time set on the device is different from the server s current time Go to the tabs Device Time 2 Select your device 3 Select Clock Set and sync the time with the server WZ For further details on how to manage the time scheduling holiday manage
56. ction searches for available wireless networks When done it displays a list of the available networks 4 n the list of networks press the A or W button to select a network and then press the C button twice WZ If the wireless router is set to Hidden Invisible you have to select Add Network and enter the correct Network Name SSID and Security key to establish the connection 5 Ifthe Enter security key screen appears go to step 6 If you select a wireless router that does not have security go to step 8 6 If the router has security enter the Security key Security key or PIN WZ e When you enter the Security key Security key or PIN use 4 gt A V buttons on your remote to select number characters Press the button to enter the characters e You can also enter numbers by pressing the number buttons on your remote When done use the right arrow button to move the cursor to Next and then press Ce 8 The network connection screen appears and the verification process starts When the connection has been verified the Internet is connected successfully message appears WZ Ifthe network does not accept the Security key Security key or PIN select Retry or select IP Settings to enter the settings manually 7 Network 134 Network e Ifyou want to set up the connection manually select IP Settings Then go to the next section How to set up manually Manual Network Setup Use the Manua
57. d click Delete Using MDC 3 6 14 Troubleshooting Guide eit The display you want to control 1 Check the connection of the RS232C cable check that the does not appear on the system cable is properly connected to appropriate serial port 2 Mormatan enan Check that another display with a duplicate ID is not connected Connecting displays with a duplicate ID can cause the displays not to be shown due to data collision Check that the display ID is within the range of O and 99 Change the ID using the Display menu WZ For a display that supports the ID in a range of O to 99 the ID should be set between O and 99 The display you want to control Check that the display is powered on See the power status in does not appear on the other the system information chart Control Info Grids Ensure you select the input source the display is connected to The following message appears Check that the display you want to control is selected repeatedly Please make selection in the information grid before controlling Displays power on or off at different Adjust the time on the PC to synchronize the time between the time from one another even though connected displays On Time or Off Time is set The remote control does not work The remote control may not work if the RS 232C cable is removed or the program is closed abnormally while the Remote Control function is Disable To resolve this run the program again and s
58. d settings menu does not have an option to adjust the screen size update the graphics card driver to the latest version Please contact the graphics card or computer manufacturer for further details about how to adjust the screen settings Screen issue The power LED is off The screen will not switch on No Signal is displayed on the screen refer to Connecting to a PC Not Optimum Mode is displayed The images on the screen look distorted Make sure that the power cord is connected 2 2 Connecting and Using a PC Check that the product is connected correctly with a cable 2 2 Connecting and Using a PC Check that the device connected to the product is powered on This message is displayed when a signal from the graphics card exceeds the product s maximum resolution and frequency Refer to the Standard Signal Mode Table and set the maximum resolution and frequency according to the product specifications Check the cable connection to the product 2 2 Connecting and Using a PC 11 Troubleshooting Guide 189 Troubleshooting Guide Screen issue The screen is not clear The screen is blurry Adjust Coarse and Fine Remove any accessories video extension cable etc and try again Set the resolution and frequency to the recommended level The screen appears unstable and shaky Check that the resolution and frequency of the There are shadows or ghost images left on the i ane a EE
59. e Oe ems rane O O Preparations RS232C cable Connector 9 Pin D Sub to Stereo Cable 9 5 2 S 1 STEREO PLUG 6 1 3 5 STEREO PLUG Connection ete te RS232C IN OUT HL Lg 1 Preparations 38 Preparations 1 5 2 Control Codes Viewing control state Get control command Header Command Data length type Controlling Set control command Header Command Data length Datalength Data Data Checksum vate type Command ae Powrcomel OT O e me e emmen o O e emona o Or hemmm gD e eee o OT E sn t e Issued IDs can be displayed in hexadecimals However ID O must be displayed as OxFF e All communications take place in hexadecimals The checksum is calculated by adding up all values except the header If a checksum adds up to be more than 2 digits as shown below 11 FF 01 01 112 the first digit is removed E g Power On amp ID 0 Checksum 12 1 Preparations ECE Preparations To control all devices connected by a serial cable simultaneously irrespective of IDs set the ID as OxFE and transmit commands Commands will be executed by each device but ACK will not respond Power control Function A product can be powered on and off using a PC Viewing power state Get Power ON OFF Status Checksum Setting power ON Off Set Power ON OFF Checksum Power Po
60. e Display Control is an application that allows you to easily control multiple display devices simultaneously using a PC Configuring Settings for Multi Control MENU I System Multi Control ENTER Assign an individual ID to your product 3 1 1 Configuring settings for Multi Control e MDC Connection Selects a port to receive the MDC inputs from o RS232C MDC Communicates with the MDC via a RS232C MDC cable o RJ45 MDC Communicates with the MDC via an RJ45 MDC cable e ID Setup Assign an ID to a set Range 0 99 Press A V to select a number and press C4 e ID Input Enter the ID number of the product connected to the input cable for input signal reception Enter the number you want using the number buttons on the remote control Communicate with MDC via the RS232C stereo cable a io OOo is RS232C IN OUT Using MDC 3 3 Communicate with LAN cable Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB iS 3 4 Communicate with Stereo cable via the LAN cable RS232C OUT RJ45 WZ Multiple products can be connected using the RS232C IN OUT port on the product 3 9 3 6 Using MDC MDC Program Installation Uninstallation 3 5 1 Installation k Insert the installation CD into the CD ROM drive 2 Click the MDC Unified installation program WZ If a software installation window is not displayed on the main screen
61. e geldos ony ek Peet sy pour alt By See also a Damart in a preerian Law pren Pa A wi tap F Personalization Ay Some items may not fit on your screen if you choose this zl Devices and Printers setting while your display is set to this resolution Marke ikel eed rat Serra Leet a at Wal giay aT thee fate Connecting and Using a Source Device 2 3 Connecting to a Video Device e You can connect a video device to the product using a cable 4 a Connecting parts may differ in different products 5 o Press the SOURCE button on the remote control to change the source 2 3 1 Connection Using an HDMI DVI Cable gi JO QG SOOO O00 a _ SE a g O g RGB DVI DP HDMI AUDIO IN WZ e Audio will not be enabled if the product is connected to a video device using an HDMI DVI cable To resolve this additionally connect an audio cable to the audio ports on the product and video device e Supported resolutions include 1080p 50 60HZ 720p 50 60HZz 480p and 576p Connecting and Using a Source Device 2 3 2 Connection Using an HDMI Cable HDMI IN Using an HDMI cable or HDMI to DVI Cable up to 1080p For better picture and audio quality connect to a digital device using an HDMI cable An HDMI cable supports digital video and audio signals and does not require an audio cable o To connect the product to a digital device that does not support HDMI ou
62. e of the four images below Position To automatically adjust the frequency fine tune or relocate the screen click Auto Adjustment Using MDC 3 6 10 Sound Adjustment You can change the sound settings Choose display devices from the list of sets and select the Sound tab Home eit Sound System Tool ISRS TS Xt 5050 gt WZ The Bass or Treble item will be disabled if the item is not supported by the selected set Bass Adjust the bass for the selected display Treble Adjust the treble for the selected display Balance L R Adjust the volume of the left and right speakers of the selected display device SRS TS XT Enable or disable the SRS TS XT effect for the selected display device Using MDC 3 6 11 System Setup Choose display devices from the list of sets and select the System tab Video Wall The Video Wall function can be used to display part of a whole picture or repeat the same picture on each of connected multiple display devices 4 Video Wall is enabled only when devices are in the group a Home Picture Sound system M video Wall On Screen Position Format al Video Wall Enable or disable Video Wall Format Select the format to display the split screen Wine i E Full Natural Using MDC HI Select the number of horizontal display devices A maximum of 15 displays can be arranged in a row WZ A maximum of 6 can
63. e the SSID and WPA key in either mode e f your router modem or device is not certified it may not connect to the product via the Samsung Wireless LAN adapter e Ensure the product is turned on before you connect the Samsung Wireless LAN adapter e Connection Methods You can setup the wireless network connection in five ways o Auto Setup Using the Auto Network Search function o Manual Setup 7 Network 133 Network o Ad Hoc o WPS PBC o One Foot Connection e The product may not recognize the Samsung Wireless LAN adapter if you connect it to the product with a USB hub or USB extension cable other than the cable supplied with the product 7 1 4 Wireless Network Setting Automatic Network Setup Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted security code called an Access or Security Key The Security Key is based on a Pass Phrase typically a word or a series of letters and numbers of a specified length you were asked to enter when you set up security for your wireless network If you use this method of setting up the network connection and have a Security Key for your wireless network you will have to enter the Pass Phrase during the the automatic or manual setup process How to set up automatically 7 Go to the Network Settings screen 2 Select Wireless General press C4 and then press C4 again 3 The Network fun
64. e time a Contents Select Delete Contents oF older1 es N AE eee g io aO m i A o V VISI and K y MagiclInfo Lite 10 6 Internal AutoPlay 10 6 1 Running Internal AutoPlay WZ Ensure at least one content item exists under Internal Memory 4 Select Internal AutoPlay in the MagicInfo Lite menu screen Play content which has been copied to Internal Memory in alphabetical order A J MagicInfo lite Network Schedule Local Schedule lt Local Schedule Manager Internal AutoPlay 10 7 USB AutoPlay 10 7 1 Running Internal AutoPlay WZ Ensure a USB device is inserted Be sure to create a folder named MagiclnfoSlide in the USB device and put content in the folder 7 Select USB AutoPlay in the MagiclInfo Lite menu screen The content contained in the MagiclnfoSlide folder on the USB device will play in alphabetical order MagiclInfo Lite e USB AutoPlay will automatically run if USB memory is connected when Network Schedule or Local Schedule is running P Magiclinfo lte Network Schedule Local Schedule Local Schedule Manager Contents Manager USB AutoPlay 10 8 When Content is Running 10 8 1 Viewing the details of the content that is running mi Press the INFO button on the remote control Software Version Displays the software version of a device Device Name Displays the name of a device recognized by the ser
65. e time to power on the selected display device e Off Time Set the time to power off the selected display device e Volume Specify the volume of the display device when it is powered on by On Time e Source Specify the inout source of the display device when it is powered on by On Time e Holiday The Holiday Management settings can be applied to the Timer e Repeat Specify the period for which you want to repeat the selected Timer 3 Using MDC Using MDC o Once Activate the timer only one time o EveryDay Activate the timer every day o Mon Fri Activate the timer from Monday through Friday o Mon Sat Activate the timer on Saturdays and Sundays o Manual Customize days of the week WZ The checkboxes to select days of the week below Repeat are enabled only if Manual is selected Holiday Management Holiday Management allows you to prevent devices that are set to be powered on by the Timer from turning on at a specified date WZ The Holiday Management function can be enabled or disabled in the Timer settings menu Holiday Management m mm e Add You can specify holidays Click the Add button in the Holiday Management window Add Holiday e Delete Delete holidays check the corresponding checkboxes and click this button e List of holidays View a list of holidays you have added Using MDC Screen Burn Protection Pixel Shift Pixel Shitt Move the screen slightly at specified t
66. e without notice for quality improvement e lf aproblem occurs after installing an operating system other than the one provided with the network box restoring the previous version of the operating system or installing software that is not compatible with the operating system provided you will not be able to benefit from technical support and will be charged a fee for a visit from a service technician A product exchange or refund will also not be available Entering Magiclnfo mode After installing and connecting the network box sold separately to the product power on the product 2 Press SOURCE on the remote control and select MagicInfo WZ Connecting the network box to the HDMI port on the product will change Source from HDMI to Magiclnfo 2 Connecting and Using a Source Device 60 Connecting and Using a Source Device 3 Select the default application you want to run when Magiclnfo starts ea Magiclnfo Setup Wizard v 1 12 Select Application step 1 Magiclnfo Pro LAN WAN based version MagicInfo i Premium Web based version Select Later lt Back B o Next N gt Finish Cancel 4 Enter the IP information i Magicinfo Setup Wizard v 1 12 a Select TCP IP step 2 Obtain an IP address automatically I Use the following IP address IP address 192 168 0 102 Subnet mask 255 255 255 0 Default gateway 192 168 0 1 E w Use the following DNS server add
67. ect number characters Press to enter the characters e You can also enter numbers by pressing the number buttons on your remote e You should be able to find the Pass Phrase on one of the set up screens you used to set up your router or modem When done use the gt button to move the cursor to Next and then press the C button The network connection screen appears and the verification process starts Press to cancel Select IP Settings on the network connection screen The IP Settings screen appears Select the field on the top press C4 and then set IP Mode to Manual 10 Press the W button on your remote to go to the IP Address entry field and then press C 7 Network 135 Network 7 7 Enter the first portion of the IP Address for example 105 into the first entry field using the number keys on your remote Press the gt button to go to the next field 12 Enter the next portion of the IP Address Press the button to go to the next field 73 Repeat the entry process for each field in the IP Address WZ If you make a mistake when entering a number re enter the number to correct it You can also press the A or W button to change the number one unit at a time 74 When done entering the IP Address press 75 Press the W button to go to the Subnet Mask fields and then press Ce 16 Repeat the same entry process for Subnet Mask Gateway and DNS Server 1 When done select OK at the bottom of the
68. elect an option using the up and down arrow keys and then press C Use the arrow keys to change the value or setting and then press Use the arrow keys to change the value or setting and then press WZ In PC mode you can only make changes to Gamma and White Balance Advanced Seitings a Dynamic Contrast Off Shadow Detail Gamma Expert Pattern RGB Only Mode Color Space Native 4 6 1 Black Tone Select the black level to adjust the screen depth e Off Dark Darker Darkest 4 6 2 Dynamic Contrast Adjust the screen contrast e Off Low Medium High 4 6 3 Shadow Detail Increase the brightness of dark images 4 6 4 Gamma Adjust the primary color intensity Screen Adjustment 4 6 5 Expert Pattern Use the Expert Pattern function to calibrate the picture If the OSD menu disappears or a menu other than the Picture menu is opened the product saves the calibration and the Expert Pattern screen disappears e Off Turns the Expert Pattern function off Pattern1 This test screen demonstrates the effect of the display settings on shades of grey and black Pattern2 This test screen demonstrates the effect of the display settings on color WZ gt After selecting Pattern1 or Pattern2 you can adjust any of the advanced settings for desired effect e While the Expert Pattern is running sound is not outputted 4 6 6 RGB Only Mode Displays the Red Green and Blue color for m
69. ement move a number display using the direction buttons on the remote control and press C4 WZ e A maximum of 100 displays can be arranged in Screen Position e The Screen Position option is only enabled when Video Wall is set to On e The Screen Position window is only displayed when Horizontal and Vertical are configured System 8 9 Source AutoSwitch Settings MENU I System Source AutoSwitch Settings ENTERC Turning on the display with Source AutoSwitch On and the previous video source selection is not active the display will automatically search the different video input sources for active video Source AutoSwitch When the Source AutoSwitch is On the display video source will automatically be searched for active video The Primary Source selection will be activated if the current video source is not recognized Secondary Source selection will become active if no primary video source is available If both the primary and secondary input sources are not recognized the display will perform two searches for an active source each search checking the primary and then secondary source If both searches fail the display will return to the first video source and display a message indicating that there is no signal When the Primary Source selection is set to All the display will search all the video source inputs twice in sequence looking for an active video source returning back to the first video source in
70. en Adjustment Resolution Select Screen Adjustment 4 3 1 Picture Size If you have a cable box or satellite receiver it may have its own set of screen sizes as well However we highly recommend you use your product 16 9 mode most of the time e 16 9 Sets the picture to 16 9 wide mode e Z00m1 Use for moderate magnification Cuts off the top and sides e Zooma2 Use for a stronger magnification e Wide Fit depending on the country Enlarges the aspect ratio of the picture to fit the entire screen e Smart View 1 Reduces the 16 9 picture by 50 e Smart View 2 Reduces the 16 9 picture by 25 e 4 3 Sets the picture to basic 4 3 mode WZ Do not set your product to 4 3 format for a long time The borders displayed on the left and right or top and bottom of the screen may cause image retention Screen burn which is not covered by the warranty e Screen Fit Displays the full image without any cut off when HDMI 720p 1080 1080p signals are inputted e Custom Changes the resolution to suit the user s preferences WZ o You can adjust and store settings for each external device you have connected to an input on the product o Picture Sizes available by Input Source 16 9 4 3 Wide Fit Screen Fit HDMI 72 1 i 1 720p 1080i 1080p Smart View 1 Smart View 2 Custom HDMI 480i 480P 16 9 4 3 Zoom1 Zoom2 Smart View 1 Smart View 2 Custom PC DVI DP HDMI when a PC is connected 16 9 4 3 4 3
71. enes with large amounts of rapid movement to provide a clearer picture Screen Adjustment 4 7 Picture Options MENU I Picture Picture Options gt ENTER Select an option using the up and down arrow keys and the press C Use the arrow keys to change the setting and then press C4 4 Nhen connecting a PC you can only make changes to the Color Tone a Picture Options E Color Temp 40000K Digital Noise Filter ii Pen Sew ain Off HDMI Black Level Normal Film Mode ii Auto Motion Plus Standard 4 7 1 Color Tone e Off Cool Standard Warm1 Warm2 WZ e Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic e You can adjust and store settings for each external device connected to an input on the product Screen Adjustment 4 7 2 Color Temp Adjust the color temperature Red Green Blue Range 3000K 1 5000k WZ This function is only available when Color Tone is set to Off 4 7 3 Digital Noise Filter If the broadcast signal received by your product is weak you can activate the Digital Noise Filter feature to reduce any static and ghosting that may appear on the screen e Off Low Medium High Auto WZ When the signal is weak try all the options until the the product displays the best picture 4 7 4 MPEG Noise Filter Reduces MPEG noise to provide improved picture quality e Off Low Medium High Auto 4 7 5 HDMI Black Level Lets
72. et Remote Control to Enable WZ This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted from nearby electronic devices Using MDC How display properties are shown when multiple displays are used When no display is selected The default value is displayed 2 When one display is selected Settings for the selected display are displayed 3 When two displays are selected e g in sequence of ID 1 andID 3 The settings for ID 1 are displayed before the settings for ID 3 4 When the All Select checkbox is checked and all displays are selected The default settings are displayed 4 1 Screen Adjustment Configure the Picture settings Brightness Color Tone etc 4 The layout of the Picture menu options may vary depending on the product Picture Mode MENU I Picture Picture Mode gt ENTER Select a picture mode Picture Mode suitable for the environment where the product will be used Different Picture Mode options are displayed depending on the current input source Picture Backlight Contrast Brightness Sharpness a Color Tint G R 4 1 1 If the input source is PC DVI or DP e Information This mode reduces eye fatigue and is suitable for displaying information to the public e Advertisement This mode is suitable for displaying video content and indoor outdoor advertisements 4 1
73. ettings Black Tone Dynamic Contrast Shadow Detail Gamma Expert Pattern RGB Only Mode Color Space White Balance 10p White Balance Off On Flesh Tone Edge Enhancement Off On Motion Lighting Off On LED Motion Plus Off On Picture Options Color Tone Color Temp Digital Noise Filter MPEG Noise Filter HDMI Black Level Film Mode Auto Motion Plus Reset Picture Sound Mode Sound Effect 3D Audio UE46A amp UE55A models only 3D Audio Off Low Medium High Speaker Settings Reset Sound Magiclnfo Lite Magiclnfo Lite Player Guide Table Of Contents 117 We 121 121 122 122 124 J24 125 127 Ze 128 128 128 129 NETWORK 130 130 131 133 134 136 136 137 138 138 138 139 SYSTEM 14 141 Videos Playing a Video Photos Viewing a Photo or Slide Show Music Playing Music Videos Photos Music Additional Functions Sorting the file lists Videos Photos Music Play Option menu Source Source Edit Name Information Refresh AllShare Network Settings Connecting to a Wired Network Wired Network Settings Connecting to a Wireless Network Wireless Network Setting WPS PBC One Foot Connection Ad Hoc Network Setup Network Status AllShare Settings Media MagiclInfo Lite Settings Multi Control Configuring settings for Multi Control Table Of Contents 142 Time 142 Clock set 142 Sleep Timer 2 On Timer 4s Off Timer
74. ff i ab Tint GAR EER 1000 sh Green l gt _lGamma Co ntrol i D Natural X aj m e Color and Tint are not available if the input source is PC e Red Green Blue and PC Screen Adjustment are not available if the input source is Video e Color Tint Color Tone Color Temp Red Green Blue and PC Screen Adjustment are not available if both PC Source and Video Source are selected Contrast e Adjust the contrast for the selected display device Brightness e Adjust the brightness for the selected display device Color e Adjust the colors for the selected display device Tint G R e Adjust the tint for the selected display device Color Tone e Adjust the background color tone for the selected display device Color Temp e Adjust the color temperature for the selected display device WZ This option is enabled if Color Tone is set to Off Red e Customize the intensity of red color for the selected display device Green e Customize the intensity of green color for the selected display device Using MDC Blue e Customize the intensity of blue color for the selected display device Using MDC Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device Gamma Control Change the gamma value for the selected display Auto Motion Plus This option is used to view dynamic images e Off Disable the Auto Motion Plus function e Clear Set the level of
75. hare or Media function How to set up using Ad hoc 7 Go to Network Settings screen 2 Select Wireless General and press C4 then press C4 again 3 Select Ad hoc The message Ad hoc service supports a direct connection with Wi Fi compatible devices like a cell phone or PC Other network services may be limited Do you want to change the network connection is displayed 4 Select OK and press C4 The product searches for the mobile device 5 When the product finishes searching for your mobile device input the generated Network Name SSID and Security Key into the device you want to connect and then connect to the network WZ If network does not operate normally check the Network Name SSID and Security key again An incorrect Security key may cause a malfunction 7 Network 7 2 7 3 Network e Ifa device is connected once it is displayed in the Network Setting list When you connect to it again you can find it in the list Network Status MENU D Network Network Status ENTER You can check the current network and Internet status Network Network Settings AllShare Settings Magiclnfo Lite Settings AllShare Settings MENU 7 Network AllShare Settings ENTER AllShare Settings Media On Off Enables or disables the media function When the media function is on you can control Media contents play using mobile phones or other devices that support DLNA DMC
76. he product for 2 hours after using it for 12 hours o Goto Display Properties gt Power Supply on your PC and set the product to power off as required o Using a screen saver is recommended It is best to use a single color or moving image screen saver e Regular color Change Type 1 Type 2 FLIGHT TIME FLIGHT TIME 07348 20 30 Ky 02348 20 30 UA102 21 10 UA102 21 10 WZ Use 2 colors Switch between 2 colors every 30 minutes as shown above e Avoid combinations of a text color and background color of contrasting brightness Avoid using grey as it may contribute to afterimage burn in Avoid using colors of contrasting brightness black and white grey ozme 23 m e Regular Text color Change o Use bright colors of similar brightness Interval Change text color and background color every 30 minutes FLIGHT TIME FLIGHT TIME 0Z348 20 30 OZ348 20 30 o Move and change text every 30 minutes as shown below VUPFUITYU FLIGHT TIME AoE FLIGHT TIME LAV TU 0Z348 20 30 KINDS 0Z348 20 30 Step 1 Step 2 Step 3 o Regularly display a moving image along with a logo Interval Display a moving image along with a logo for 60 seconds after using for 4 hours o The best way to protect the product from afterimage burn in is switching the power off or setting the PC or system to run a screen saver when not in use Also Warranty service may be limited depending on instruc
77. hen moving the product in the future Preparations 1 1 2 Checking the Components WZ Contact the vendor where you purchased the product if any components are missing e The appearance of the components and items sold separately may differ from the image shown Components miz Components may differ in different locations SSS Quick setup guide Warranty card User manual Not available in all locations Sy i v Magiclinfo Lite Edition Cleaning cloth Power cord Software CD Remote Control Batteries D SUB cable AA59 00552A Not available in all locations RS232C IN Adapter RS232C OUT Adapter Holder Ring 4EA BN61 07295A Holder Wire stand BN61 05491A WZ The RS232C adapter can be used to connect to another monitor using the D SUB 9 pin type RS232C cable Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product 4 Preparations Items sold separately WZ e The stand is not supplied e The following items can be purchased at your nearest retailer a gt Wall mount KIT RS232C stereo cable DVI cable Sy HDMI cable DP cable RCA stereo cable Stereo cable LAN cable 1 Preparations 23 1 2 Preparations Parts 1 2 1 Control Panel WZ e The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality e Keep the area
78. hes If you experience any such symptom stop viewing 3D product remove 3D Active Glasses and rest o Watching 3D images for an extended period of time may cause eye strain If you feel eye strain stop viewing 3D product remove your 3D Active Glasses and rest o A responsible adult should frequently check on children who are using the 3D function If there are any reports of tired eyes headaches dizziness or nausea have the child stop viewing 3D product and rest o Do not use the 3D Active Glasses for other purposes Such as general eyeglasses sunglasses protective goggles etc o Do not use the 3D function or 3D Active Glasses while walking or moving around Using the 3D function or 3D Active Glasses while moving around may result in injuries due to running into objects tripping and or falling e 3D Mode Select the 3D input format m If you want to feel the 3D effect fully please wear the 3D Active Glasses first and then select 3D Mode from the list below that provides the best 3d viewing experience 4 Screen Adjustment 103 Screen Adjustment o When watching 3D images turn on 3D Active Glasses a Scot Side Deneve two imagen rent each thor ieee Displays one image above another one image above another Line by Line ee the images for the left and right eye alternately in rows Vertical Stripe Displays the images for the left and right eye alternately in columns Checker Board Displays the images for the
79. ime intervals to prevent screen burn in Screen Saver Screen Saver This function prevents screen burn in when the screen of the selected display device is left idle for an extended period of time Interval Set the interval to activate the Screen Saver e Mode The Time setting can vary for each Mode Safety Screen Safety Screen signal Patt Using MDC The Safety Screen function can be used to prevent screen burn in when a stationary image displays on the screen of a display device for an extended period of time Lamp Control Lamp Control is used to adjust the backlight to reduce power consumption Automatically adjust the backlight of the selected display device at a specified time If Manual Lamp Control is adjusted Auto Lamp Control will automatically switch to Off Manually adjust the backlight for the selected display If Auto Lamp Control is adjusted Manual Lamp Control will automatically switch to Off e Ambient Light Ambient Light detects ambient light intensity and automatically adjusts the screen brightness of all the LFDs in the same serial chain 3 6 12 Tool Settings 1 Home Misia Soun IPanel Control Security Panel Control Turn on or off the screen of a display device Remote Control Enable or disable the remote control Using MDC Reset Reset Picture Reset the screen settings Reset Sound Reset the sound settings Reset System
80. info Lite 166 y Magiclnfo Lite Power Point e Compatible document file formats o Extension ppt pptx o Version Office 97 Office 2007 Functions not supported Animation effect 3D shapes which will be displayed in 2D Header and footer some subitems are not supported Word Art Align A group alignment error may occur Office 2007 SmartArt is not fully supported 97 out of 115 subitems are supported Object insertion Opening encrypted documents Vertical text Some subitems are not supported Slide notes and handout y MagiclInfo Lite 10 2 Network Schedule 10 2 1 Connecting to a server To use the Magiclnfo Lite Server the clock on the monitor must be set through the server web To use local schedules and AutoPlay only without using the Magiclnfo Lite Server the clock must be set using the remote control Network setup To run Magiclnfo Lite connect to a network WZ Refer to 130 page for details about the Network Settings menu Server setup Go to MENU Network Magiclnfo Lite Settings Server Next enter the server information E g http 192 168 0 10 7001 Magiclnto Configuring the FTP mode and default storage space e Default Storage Specify the location you want to save content downloaded from the server to o Internal Memory Save the content to the internal memory of the product o USBmemory Save the content to USB memory WZ If a network schedule is runni
81. ing the appearance of menus icone HKKKKKKKKKE bu kyrmundh Eibert tore cerniparber a XXXX XXX bounds and mouse pomtert Displey Settengs 1 duti pour mania pepoludeon which change Ehe wider 0 mahe di fewest ens fit on the soneen You can alse coriral mamta flicker inah ete Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution a Remote Desktop Connection We Microsoft Word 2010 Control Panel View by Letge com Pa Administrative Tools gt Wireless Display Manager 7 Backup and Restore xz Microsoft Office Excel 2007 q BitLocker Drive Encryption 5a Color Management Bl credential Manager cA Date and Time e Default Programs le Desktop Gadgets Et Device Manager a Devices and Printers a Display Ease of Access Center o So ES gt Control Panel gt All Control Panel Items gt Display s If Search Control Panet p Control Panel Home 3 Make it easier to read what s on your screen Adjust resolution You can change the size of text and other items on your screen by choosing one of B aate coor these options To temporarily enlarge just part of the screen use the Magnifier tool Change display settings Connect to a projector P Smaller 100 default Previ Adjust ClearType text Set custom text size DPI Medium 125 a Vance enie
82. install with the MDC Unified execution file in the MDC folder on the CD 3 Click Next in the displayed Installation Wizard screen 4 Inthe License Agreement window displayed select accept the terms in the license agreement and click Next 5 Inthe displayed Customer Information window fill out all the information fields and click Next 6 Inthe displayed Destination Folder window select the directory path you want to install the program in and click Next WZ If the directory path is not specified the program will be installed in the default directory path Inthe displayed Ready to Install the Program window check the directory path to install the program in and click Install 8 Installation progress will be displayed 9 Click Finish in the displayed InstallShield Wizard Complete window WZ Select Launch MDC Unified and click Finish to run the MDC program immediately 70 The MDC Unified shortcut icon will be created on the desktop after installation WZ e The MDC execution icon may not be displayed depending on the PC system or product specifications Press F5 if the execution icon is not displayed 3 5 2 Uninstallation Select Settings gt Control Panel on the Start menu and double click Add Delete Program 2 Select MDC Unified from the list and click Change Remove WZ MDC installation can be affected by the graphics card mother board and network conditions What is MDC Mult
83. ion Ee i j Timer jjj Pixel Side Gray 8 7 1 Pixel Shift To prevent after images on the screen you can use this function to have pixels move on the LCD in the horizontal or vertical direction WZ Available Pixel Shift Settings and Optimum Settings O Available Settings Optimum Settings HDMI PC WZ e The Pixel Shift value may differ depending on the product size inches and mode This function is not available in the Screen Fit mode e Horizontal Sets how many pixels the screen moves horizontally e Vertical Sets how many pixels the screen moves vertically e Time Set the time interval for performing the horizontal or vertical movement respectively 8 7 2 Timer You can set the timer for Screen Burn Protection If you start the operation to erase any residual image the operation will be performed for the set period of time and then automatically finish System e Mode You can change the Safety Screen Type e Period Use this function to set the execution period for each mode set in the timer e Time Within the set period of time specify a time for execution 8 7 3 Pixel This function prevents after images by moving many pixels on the screen 8 7 4 Side Gray Select the brightness of the grey for the screen background e Off Light Dark 8 8 System Video Wall MENU I System Video Wall ENTER Customize the layout of multiple displays tha
84. iple display control MDC is an application that allows you to easily control multiple display devices simultaneously using a PC 3 Using MDC 66 Using MDC 3 6 1 Connecting to MDC Using MDC via RS 232C serial data communications standards An RS 232C serial cable must be connected to the serial ports on the PC and monitor Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC One display device can connect to another using an RS 232C serial cable Using MDC 3 6 2 Connection Management Connection management includes the Connection list and Connection list modification options Connection list Connection list shows the details of the connections such as connection setting IP COM Port No MAC and Connection Type connection status Set ID Range and detected devices Each connection can contain a maximum of 100 devices connected in serial daisy chain fashion All the LFDs detected in a connection are displayed in the Device list where the user can make groups and send commands to detected devices Connection list modification options Connection modification options includes Add Edit Delete and Refresh Multiple Display Control Picture Sound System Tool Input 1 Channel v LFD Device daeina All Device List 00 v Schedule Using MDC 3 6 3 Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs connected in daisy chain
85. is connected to the AUDIO OUT port on the primary monitor the sound from the primary monitor will be muted Connecting to an Audio System AUDIO OUT ae inn OO 2 4 Connecting and Using a Source Device Changing the Input source 2 4 1 Source MENU I Media Source ENTER Source allows you to select a variety of sources and change source device names Source You can display the screen of a source device connected to the product Select a source from source list to display the screen of the selected source WZ Refer to page 127 for details about the Source menu Videos Photos Music Source AEE The input source can also be changed by using the SOURCE button on the remote control p The screen may not display correctly if an incorrect source is selected for the source device you want to convert to 2 9 Connecting and Using a Source Device Connecting the network box WZ For details on how to connect to a network box refer to the user s manual provided with the network box upon purchase 2 5 1 Magiclnfo To use Magiclnfo a network box sold separately must be connected to the product F e To change the Magiclnfo settings run MagicinfoSetupWizard on the desktop e For details on how to use MagiclInfo refer to the DVD provided with the network box e The information in this section is subject to chang
86. ization Display Adjust Resolution and adjust the resolution Windows XP Set power saving mode in Control Panel Appearance and Themes Display Screen Saver Settings or BIOS SETUP on the PC Windows ME 2000 Set power saving mode in Control Panel Display Screen Saver Settings or BIOS SETUP on the PC Windows Vista Set power saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Windows 7 Set power saving mode in Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC WZ Refer to the user manual for your PC or graphics card for further instructions on adjustment 11 Troubleshooting Guide 193 S Specifications 12 1 General 921 2 x 536 1 x 29 9 1056 3 x 612 3 x 29 9 1246 4 x 718 2 x 29 9 mm 10 5 kg mm 12 5 kg mm 17 1 kg 3023 2 lel X 1 2 AVX 24 1 x12 49 1 x 28 2 x 1 2 inches 23 1 Ibs inches 27 6 Ibs inches 37 7 los VESA Mounting Interface 200 x 200 mm 400 x 400 mm Model Name Name UE46A UE55A 46 inches 117cm 55 inches 138cm Panel 1025 98 H Display area 580 57 V 1209 6 H x 680 4 V Display Color Display Color 1 07B Dimensions W x H x D Weight without stand 1030 4 X 585 0 x 29 9 mm 12 kg 1221 8 X 692 7 X 29 9 mm 16 kg AO0 6 x 23 0 x 1 2 426 1 21 3 12 inches 37 7 lbs inches 26 5 Ibs VESA Mounting In
87. justing the OSD with the Remote Control ova Gh CY be ZD i Open the OSD menu Select from Picture Sound Media Network System or Support in the displayed OSD menu screen Change settings as desired Finish setting Close the onscreen display OSD menu To place batteries in the remote control 1 Preparations 29 Preparations Remote Control Reception Range Use the remote control within 7m to 10m from the sensor on the product at an angle of 30 from the left and right hl e Store used batteries out of reach of children and recycle e Do not use anew and used battery together Replace both batteries at the same time e Remove batteries when the remote control is not to be used for an extended period of time Preparations 1 3 Before Installing the Product Installation Guide To prevent injury this apparatus must be securely attached to the floor wall in accordance with the installation instructions e Ensure that an authorized installation company installs the wall mount e Otherwise it may fall and cause personal injury e Make sure to install the specified wall mount 1 3 1 Tilting Angle and Rotation WZ Contact Samsung Customer Service Center for further details A The product can be tilted at a maximum angle of 15 from a perpendicular wall surface B To use the product vertically portrait turn it clockwise so that the L
88. k connection values or if you want to set the connection manually go to the next secton Manual Network Setup 7 Network 131 Network Manual Network Setup Use the Manual Network Setup when connecting your product to a network that requires a Static IP address Getting the Network Connection Values To view the Network connection values on most Windows computers follow these steps KA Hm Right click the Network icon on the bottom right of the screen In the pop up menu that appears click Status On the dialog that appears click the Support tab On the Support Tab click the Details button The Network connection values are displayed How to set up manually To set up your product cable network connection manually follow these steps 1 2 9 Go to the Network Settings screen Select Wired press 4 and then press C4 again The network test screen appears and the verification process starts Press The verification process stops Select IP Settings on network connection screen The IP Settings screen appears select the field at the top press C4 and then set IP Mode to Manual Press the W button on your remote to go to the IP Address entry field and then press Enter the first portion of the IP Address into the first entry field using the number keys on your remote Press the right arrow button to go to the next field Enter the next portion of the IP Address Press the right arr
89. l Use the left and right arrow buttons to change the volume level o Source Select the input source of your choice o Music Photo when the Source is set to USB Select a folder in the USB device containing music or photo files you want played when the product on automatically WZ o If there is no music file on the USB device or you don t select a folder containing a music file the Timer function does not operate correctly o __If there is only one photo file in the USB the Slide Show will not play o lfa folder name is too long the folder cannot be selected Each USB you use is assigned its own folder When using more than one of the same type of USB make sure the folders assigned to each USB have different names o Werecommend that you use a USB memory stick and a multi card reader when using On Timer The On Timer function may not work with USB devices with a built in battery MP3 players or PMPs made by some manufacturers because the product can take too long to recognize these devices 8 2 4 Off Timer You can set up three separate Off Timer configurations Off Timer 1 Off Timer 2 Off Timer 3 WZ You must set the clock before you can use Off Timer e Setup Select Off Once Everyday Mon Fri Mon Sat Sat Sun or Manual If you select Manual you can choose the days you want Off Timer to turn off your product WZ The check mark indicates days you ve selected e Time Set the hour minute Use the number but
90. l nd Checksu l mM Source Input Source An input source code to be set on a product Nak Comma m ERR A code showing what error has occurred Preparations Screen e Function The screen mode of a product can be changed using a PC Screen mode cannot be controlled when the Video Wall function is enabled au This control can only be used on models that include a product e Viewing screen status Get Screen Mode Status Checksum e Setting the picture size Set Picture Size Header Command Data length E Data 1 Checksum OxAA 0x18 ein Mode Screen Mode A code that sets the product status C Header eli Data length Ack Nak r CMD Val nd Checksu l mM OxAA OxFF 3 A sac Mode Screen Mode A code that sets the product status Comma m ERR A code showing what error has occurred 1 Preparations 44 Preparations Screen size control Function The screen size of a product can be changed using a PC Viewing the screen size Get Screen Size Status Checksum C Header n Data length Ack Nak r CMD Val nd Checksu o Ow owe Sr Size Screen Size product screen size range O 255 unit inch Co m ERR A code showing what error has occurred 1 Preparations 45 Preparations PIP On Off control e Function The PIP mode of a product can be turned on or off using a PC me o Only available on models that have the PIP f
91. l Network Setup when connecting your product to a network that requires a Static IP address or if the automatic connection process has failed Getting the Network Connection Values To view the Network connection values on most Windows computers follow these steps KR m Right click the Network icon on the bottom right of the screen In the pop up menu that appears click Status On the dialog that appears click the Support tab On the Support Tab click the Details button The Network connection values are displayed How to set up manually To set up your product cable network connection manually follow these steps 1 2 3 8 9 Go to the Network Settings screen Select Wireless General press C and then press again The Network function searches for available wireless networks When done it displays a list of the available networks In the list of networks press the A or W button to select a network and then press the C button twice WZ If the wireless router is set to Hidden Invisible you have to select Add Network and enter the correct Network Name SSID and Security key to establish the connection If the Enter security key screen appears go to step 6 If you selected an wireless router that does not have security go to step 8 Enter the Security key Security key or PIN WZ e When you enter the Security key Security key or PIN use the q gt A W buttons on your remote to sel
92. l change the running mode from local schedule to network schedule 7 Select Local Schedule Manager in the MagicInfo Lite menu screen Local Schedule Manager MagiclInfo Lite yo _ oN 10 4 6 Viewing the details of a local schedule Local Schedule select Local Schedule Manager in the MagiclInfo Lite menu screen LJ Magicinfo lite Select the local schedule you want to view the details of a Local Schedule Manager The details of the schedule will be displayed Information y Magicinfo Lite 10 5 Contents Manager 10 5 1 Copying content 7 Select Contents Manager in the Magiclnfo Lite menu screen Contents Manager 2 Select the content you want to copy If content under Internal Memory is selected You can copy the content under Internal Memory to USB memory If content under USB is selected You can copy the content under USB memory to Internal Memory WZ Selecting content under Internal Memory and USB memory at the same time will disable copying Contents 3 Select Copy MagiclInfo Lite yo i v 10 5 2 Deleting content Select Contents Manager in the MagiclInfo Lite menu screen LJ Magicinfo lite age Na eee a ANTO V LOr pe O ajg 7 TS i Matr lage Conte Pe al Select the content you want to delete e Content under Internal Memory and USB memory can be deleted at the sam
93. left and right eye alternately in pixels Frame Displays the images for the left and right eye alternately in Sequential frames Some file format may not supported the 2D 3D Oo mi 5 o Side by Side and Top amp Bottom are available when the resolution is 720p 1080i and 1080p in HDMI and USB mode or when set to PC and the PC is connected through an HDMI DVI cable o Vertical Stripe Line by Line and Checker Board are available when the resolution is set to PC and the PC is connected through an HDMI DVI cable o Frame Sequential displays the frequency 60Hz only when the resolution is set to PC 3D Effect Adjust 3D effects like perspective and depth for your preferred 3D viewing experience o Auto Automatically adjust the perspective and depth settings in accordance with the 3D input source o Manual Manually adjust the perspective and depth settings L R Change L R Image R L Image Swap the left and right pictures 3D 2D Off On Displays the image for the left eye only WZ This function is deactivated when 3D Mode set to 2D 3D or Off 3D Auto View Off Message Notice On If 3D Auto View is set to On a Side by Side format HDMI signal with one of the resolutions below is automatically switched to 3D If you set 3D Auto View to Message Notice a pop up message window appears when the product receives a 3D signal mis o lfa 3D failure
94. me Audio DivX 3 11 4 x LPCM DTS Core MPEG4 SP ASP 1920x1080 Motion JPEG 1920x1080 os DivX 3 11 4 x 1920x1 XID 4920x1080 a MP3 AC3 LPCM WMA MPEG4 SP ASP 1920x1080 a Motion Motion JPEG 1920x1080 080 6 30 30 ee Media 3 H 264 n MP Mp4 MP4 MPEG4 SP ASP 1920x1080 ata aired H 2 i MP odp 3GPP AAC HE a hte sepa Ea ie O MPEGT 352x288 24 25 30 MPEG 1920x1080 24 25 30 EF MPEG 352x288 24 25 30 o3 ACB PS MPEG 4920x1080 24 25 30 80 ME LPCM H 264 1920x1080 6 30 235 AAC VFO 6 Media 118 Media ne Container Video Codec Resolution mame Extension rate fps MPEG2 4920x1080 24 25 30 Renna TS H 264 4920x1080 MP3 DD Video content will not play or not play correctly if there is an error in the content or the container is e Sound or video may not work if the contents have a standard bitrate frame rate above the compatible Frame sec listed in the table above e lf the Index Table is in error the Seek Jump function is not Supported e You may experience file stuttering while playing a video through a network connection e Video content can not be played if there are many contents in one file e When you play video over a network connection the video may not be played smoothly e The menu may take longer to appear if the video s bit rate exceeds 10Mbps e Some USB digital camera devices may not be compatible with
95. ment etc refer to the lt Magiclnfo server user s manual gt y Magiclnfo Lite 10 3 Local Schedule Run a schedule created by Local Schedule Manager Go to Local Schedule Manager Select the content you want to run WZ This menu is disabled if no schedule was created by Local Schedule Manager Select Local Schedule Manager in the MagicInfo Lite menu screen 2 Run a schedule created by local schedule 10 4 Local Schedule Manager Configure the settings for playback from Local Schedule Alternatively select and play content from internal or USB memory according to the customized playback sequence 10 4 1 Registering a Local Schedule Select Local Schedule Manager in the MagicInfo Lite menu screen 7 D J Magicinfo fite Network Schedule _ Local Schedule Local Schedule Manager y Magicinfo Lite 2 Select Create in the Local Schedule Manager screen 3 Select Time to set the time you want to play content WZ To create a schedule that starts on one day and finishes the next day the time must be set as shown below e E g PM 09 00 AM 12 00 AM 12 00 AM 06 00 y Magiclnfo Lite 4 Select Contents to specify the content you want to play G Contents 5 Menu1 jpg Dacalaort P NI NA NI NIS NSIN 5 Select Save 6 Select the memory space you want to save the content to Create Internal Check that the schedule has been added
96. ng when USB memory is not connected the default content will run 10 MagiclInfo Lite 168 y Magiclnfo Lite 10 2 2 Magiclnfo Lite Settings MENU I Media Magicinfo Lite ENTER C3 4 mi Press the Magiclnfo Lite button on the remote control You can view whether the server is connected approval in the Magiclnfo Lite menu screen To view whether the server is connected when a network schedule is running press INFO on the remote y Magic nfo lite Network Schedule Local Schedule 10 2 3 Approving a connected device from the server Access the server you have assigned to your device MagicInfo 1 UserID hakon Password SignUp Contact the administrator Copyright 2009 SamsungElectronics All rights reserved 2 Enter your ID and password to log in y MagiclInfo Lite 3 Select Device from the top menu bar omm ver Setting Device View Al Dewees now siete CAES Syne See Ouse Ute Owwce seun Saal e 9 a a Deas Mar Dee wD Cre ame oreo On aa Content On Ae Comet Curent kheave Carved Pease 4 Select Lite Device from the menus on the left Magiclnfo Lite 5 Select View Unapproved Lite Device from the sub m enus of Lite Device ee m Lha Devica Vare Linapprad Lis Clever Derana Band Mi amain 217 403 153 S011 Wea a i 6 Select the Approve button for your device from the list of unapproved Lite devi
97. nt s 5 451 942 5 956 674 2 0 Digital Out 5 974 380 5 978 762 6 487 535 amp other U S and worldwide patents issued amp pending DTS and the Symbol are registered trademarks amp DTS 2 0 Digital Out and the DTS logos are trademarks of DTS Inc Product Includes software DTS Inc All Rights Reserved DivX Certified to play DivX video up to HD 1080p including premium content DivX DivX Certified and associated logos are trademarks of DivX Inc and are used under license ABOUT DIVX VIDEO DivxX is a digital video format created by Divx Inc This is an official DivX Certified device that plays DivX video Visit www divx com for more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 Open Source Licence Notice In the case of using open source software Open Source licences are available on the product menu Open Source Licence Notice is written only English 12 Specifications 199 Appendix Contact SAMSUNG WORLDWIDE WZ Ifyou have any questions or comments relating to Samsung products
98. ntrol WZ e Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled e Remote control button functions may differ for different products POWER OFF Power ON the product 9 J O Power off the product Number buttons Not available TP Lo Turns the 3D image on or off Mute the sound Unmuting the sound Press MUTE again or press the volume control VOL button Adjust the volume VOL source CHIP Not available Change the input source MagicInfo Lite Launch Button Magicinf ae Display or hide the onscreen display menu or return to the previous menu j It sets safe lock function Quickly select frequently used functions l Display information about the current input source Move to the upper lower left or right menu or adjust an option s setting Confirm a menu selection Return to the previous menu Exit the current menu You can select the PC DVI HDMI or DisplayPort external input directly MDC Quick Launch Button MagicInfo Quick Launch Button This button is disabled for products that do not support MagicInfo AA59 00552A MagicInfo can only be enabled when a network box is connected Automatically adjust the screen settings in PC mode ed AN AR AGL i Ri i A e 1 Preparations 28 Preparations Ad
99. o execute Plug amp Play Index Numerics 3D Mode 103 A Appendix 200 B Batteries 29 C Changing the Resolution 54 Communicate with MDC via the RS232C stereo cable 64 Contact SAMSUNG WORLDWIDE 200 Custom settings screen 100 E Eco Solution 113 Energy Saving 145 Items sold separately 23 M Magiclnfo Lite 116 MDC InstallationUninstallation 66 Menu Language 144 Mode 99 Multi Control 141 N Network Settings 130 O OSD Rotation 161 P PC connection 51 Picture Size 101 Problem report 188 R Remote Control 28 Reset All 161 S Screen Adjustment 100 Screen Position 152 Sleep Timer 142 Software Upgrade 162 Source AutoSwitch Settings 153 Specifications 194 Standard 99 T Time 142 V Video connection 56
100. objects on the product or apply impact e Afire or electric shock may result Do not move the product by pulling the power cord or any cable e Product failure an electric shock or fire may result from a damaged cable If a gas leakage is found do not touch the product or power plug Also ventilate the area immediately e Sparks can cause an explosion or fire e Never touch the power cord or antenna cable when thunder or lightning is present Do not lift or move the product by pulling the power cord or any cable e Product failure an electric shock or fire may result from a damaged cable Do not use or keep combustible spray or an inflammable substance near the oroduct e An explosion or fire may result Ensure the vents are not blocked by tablecloths or curtains e An increased internal temperature may cause a fire Before Using the Product 9 Before Using the Product Fa lt gt ToT Do not insert metallic objects chopsticks coins hairpins etc or objects that burn easily paper matches etc into the product via the vent or input output ports etc e Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product Then contact Samsung Customer Service Center Product failure an electric shock or fire may result Do not place objects containing liquid vases pots bot
101. occurs due to a 3D information error set 3D Auto View to Off and manually a select a 3D Mode using the corresponding menu 3D Optimize The overall adjustment of 3D effect 4 Screen Adjustment 104 Screen Adjustment WZ Support resolution 16 9 only 1280 x 720p 25 4 50 HZ 1920 x 1080 257 SOAZ 1920 x 1080p 257 50 Az Resolution supported for HDMI PC mode The resolution for HDMI PC mode is optimized to 1920 x 1080 input An input resolution other than 1920 x 1080 may not be displayed properly in 3D display or full screen mode How to watch the 3D image e Method 1 WZ o Some 3D modes may not be available depending on the format of the image source o To watch in 3D wear 3D Active Glasses and press the power button on the glasses 7 Press the MENU button on your remote use the A or W button to select Picture and then press the button 2 Use the A or W button to select 3D and then press the C button Q Use the A or W button to select 3D Mode and then press the button 4 Using the A or W buttons on your remote control select the 3D Mode of the image you want to view Supported formats and operating specifications for Standard HDMI 3D WZ The 3D formats indicated below are recommended by the HDMI association and must be supported Source signal format Standard HDMI 1 4 3D 1920 x 1080p 24 Hz x 2 1920 x 2205p 24 Hz 1280 x 720p 50 60 Hz x 2 1280 x 1470p 50 60 Hz For the Standa
102. ogram All the menus and buttons of the product and remote control except for the LOCK button on the remote control will be locked by the Safety Lock function To unlock the menus and buttons press the LOCK button and then enter the password default password O O O 0 8 5 2 Button Lock Off On This menu can be used to lock the buttons on the product Only the remote control can control the product if Button Lock is set to On System 8 5 3 Change PIN The Change PIN screen will appear Choose any 4 digits for your PIN and enter it in Enter New PIN Re enter the same 4 digits in Confirm New PIN When the Confirm screen disappears press the Close button The product has memorized your new PIN 8 6 System Auto Protection Time MENU I System Auto Protection Time ENTER C If the screen displays a still image for a certain period of time you define the product activates the screen saver to prevent the formation of burnt in ghost images on the screen e Off 2 hours 4 hours 8 hours 10 hours 8 System Screen Burn Protection MENU I System Screen Burn Protection ENTER C To reduce the possibility of screen burn this unit is equipped with Pixel Shift screen burn prevention technology Pixel Shift moves the picture slightly on the screen The Pixel Shift Time setting allows you to program the time between movements of the picture in minutes Screen Burn Protect
103. ohol solvent or WY amp surface active agents e Do not spray water or detergent directly on the product 4 4 Weta soft and dry cloth in water and wring thoroughly to clean the exterior of the product Connect the power cord to the product when cleaning is finished Power on the product and computer Storage High glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby We Contact Customer Service Center if the inside of the product needs cleaning service fee will be charged Before Using the Product 3 Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO QUALIFIED PERSONNEL This symbol indicates that high voltage is present inside It is dangerous to make any kind of contact with any internal part of this product This symbol alerts you that important literature concerning operation and maintenance has been included with this product Symbols A serious or fatal injury may result if instructions are not followed Personal injury or damage to properties may result if instructions are A Caution not followed Activities marked by this symbol are prohibited o Instructions marked by this symbol must be followed Before Using the Product 4 Before
104. ol Set the standby mode to activate if an inout source is not detected Fan amp Temperature Picture Sound User Auto Color Auto Power as nee pti A E T A Configure the settings required to detect the fan speed and internal temperature for the product s protection Fan Control Select a method to configure the fan speed Fan Speed Configure the fan speed Temperature Detect the internal temperature by specifying the range of temperature Using MDC Security Picture Sound User Auto Color Fan Control On oy Fan Speed eee On Safety Lock Lock the on screen menus WZ To unlock the menus set Safety Lock to Off Button Lock Lock the buttons on the display device WZ To unlock the buttons set Button Lock to Off OSD Display Home Picture Sound IMDC OSD Source OSD Select whether to display a message when the Source is changed Not Optimum Mode OSD Select whether to display a message when a non compatible mode is selected No Signal OSD Select whether to display a message when there is no input signal MDC OSD Select whether to display a message when settings are changed by the MDC Using MDC Time Clock Set Change the current time on the selected display device according to the time set on a PC If the time is not set on the display device null values will be displayed Timer Y Y Disable F Once e OnTime Set th
105. on the PC Connection Using an HDMI Cable HDMI IN Connecting and Using a Source Device Connection Using an DP Cable Connecting and Using a Source Device 2 2 2 Changing the Resolution WZ Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality The picture quality of TFT LCDs may degrade if the optimum resolution is not selected Changing the Resolution on Windows XP Go to Control Panel Display Settings and change the resolution _ Thanet Desio Sone Seve Appessree ene Gy 52 roor Accert ing Cong Se mrha core S matt Pe pyar 6 err of pas r Del dts e Conmext To Up Printers and laxes E Hep and support yp Search E Run Changing the Resolution on Windows Vista Go to Control Panel Personal Settings Display Settings and change the resolution ace z Computer amp Windows Live Messenger Download Network W Norton AntiVirus Connect To o3 Windows DVD Maker Control Panel Perronaizti Performance a R bleem A Windows Meeting Space Default Programs gt All Programs Help and Support il y Ex i Peel Prohlernn Pigga Health HU nan i Baa aaae hab a ControrPanee Pick a different mouse pointer You can also change hiw the menis poster books dung uch ictrevtees at ccking and cebecting There Change thr theme Themes can e harar vole range of vebual and auditory elements at ene time inchgd
106. or EMC requirements for industrial use Class A and can be used in areas other than general households 12 Specifications 195 S Specifications 12 2 PowerSaver The power saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time The power is not turned off in power saving mode To switch the screen back on press any key on the keyboard or move the mouse Power savign mode only functions when the product is connected to a PC with a power saving function Power off PowerSaver Normal PONOT Saung ji Button Operation mode ME4OA 100 W 100 W EEA 140 W Powe e ME55A 160 W 160 W less than 1 W less than 1 W General 140 W ee 160 W WZ e The displayed power consumption level can vary in different operating conditions or when settings are changed e SOG Sync On Green is not supported e To reduce the power consumption to O turn off the disconnect the power cord Disconnect the power cable if you will not be using the product for an extended period of time during vacation etc 12 Specifications 196 S Specifications 12 3 Preset Timing Modes e This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel Using a resolution other than the specified resolution may degrade the picture quality To avoid this
107. or switching to a view mode the screen Use the remote control after the product has completed Anynet configuration or has finished switching to Anynet System The connected device is not displayed The product sound is not output through the receiver 8 11 3 Receiver Sound is played through the receiver Check whether or not the device supports Anynet functions Check whether or not the HDMI cable is properly connected Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Search Anynet devices again Anynet requires an HDMI connection Make sure the device is connected to your product with an HDMI cable Some HDMI cables may not support Anynet functions If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected please repeat the device scan Connect the optical cable between product and the receiver 8 12 8 13 8 14 8 15 System DivX Video On Demand MENU I System DivX Video On Demand ENTER Shows the registration code authorized for the product If you connect to the DivX web site and register using that code you can download the VOD registration file WZ For more information about DivX VOD visit htto vod divx com Network Remote Control MENU I System Network Remote Control ENTER Turn on off or give permission to Samsung mobile phone devices to connect wi
108. ou of the failure If you want to try using One Foot Connection again reset the wireless router and then try again from Step 1 You can also choose one of the other connection setup methods 5 The network connection screen appears and network setup is done 6 Place the wireless router in a desired location If the wireless router s settings change or you install a new wireless router you must perform the One Foot Connection procedure again beginning from Step 1 Priority QOS This Priority QOS function is unique to Samsung wireless routers You can connect a Samsung wireless router to many devices such as laptops mobile phones BD players etc But when you connect a Samsung product to a Samsung wireless router the Samsung wireless router gives the Samsung product a priority connection This ensures you get the highest quality streaming contents and the fastest throughput speed e Priority QOS makes your product faster by giving it priority bandwidth Priority QOS is optional You can turn it on and off Because your Samsung product has a priority connection you can enjoy HD content without buffering The connection speed may vary based on the network environment 7 1 7 Ad Hoc Network Setup You can connect to a mobile device supporting Ad hoc connections without a wireless router or AP through the product When connected to a mobile device you can use files on the device or connect to the Internet using the AllS
109. ow button to go to the next field Repeat the entry process for each field in the IP Address WZ If you make a mistake when entering a number re enter the number to correct it You can also press the up or down arrow button to change the number one unit at a time When done entering the IP Address press Ca 70 Press the down arrow key to go to the Subnet Mask fields and then press Ce 11 Repeat the same entry process for Subnet Mask Gateway and DNS Server 12 When dore select OK at the bottom of the page and then press C4 The network test screen appears and the verification process starts When the connection has been verified the Internet is connected successfully message appears Network 7 1 3 Connecting to a Wireless Network To connect your product to your wireless network you need a wireless router or modem and a Samsung Wireless LAN adapter WISOSABGN WISO9SABGN2 or WISTOABGN sold separately which you connect to your product back or side panel USB port See the illustration below Wireless IP sharer router having DHCP server Product Panel The LAN Port on the Wall roauct Fane Samsung Wireles LAN Adapter LAN Cable Samsung s Wireless LAN adapter is sold separately and is offered by selected retailers Ecommerce sites and Samsungparts com Samsung s Wireless LAN adapter supports the IEEE 802 11a b g and n communication protocols Samsung recommends using IEEE 802 11n When you
110. p will be deleted Renaming Groups Select a group name and click Edit 2 n the Edit Group window displayed click Rename Fdit Group i Add on the same Level Add on the sub level l l ewe o COo o ome O 3 Ifa cursor appears in the old group name enter a new group name miz The Add on the same level button is enabled only if at least one group is created Using MDC Schedule Management Creating Schedules Create and register a schedule on a group basis 7 Click All Schedule List in the schedule section on the left side of the program window The Add button will be enabled in the middle Multiple Display Contro Picture Sound System Tool 4 LFD Device v Schedule All Schedule List 2 Click the Add button The Add Schedule window will appear Using MDC 3 Click Add below the Device Group item and select the group you want to add a schedule to 4 Select Date amp Time Action and click OK The schedule will be added and a list of schedules will appear in the set list window e Device Group Select a group e Date amp Time o Instant Execution Run the schedule immediately o Timer Set the date time and interval to run the schedule e Action Select a function that will activate at the specified time and interval Schedule Modification To modify a schedule select the schedule and click Edit Deleting a Schedule To delete a schedule select the schedule an
111. page and then press C4 The network connection screen appears and the verification process starts When the connection has been verified the Internet is connected successfully message appears 7 1 5 WPS PBC How to set up using WPS PBC If your router has a WPS PBC button follow these steps 7 Go to Network Setting screen 2 Select WPS PBC press C and then press again 3 Press the WPS PBC button on your router within 2 minutes Your product automatically acquires all the network setting values it needs and connects to your network 4 The network connection screen appears and network setup is done 7 1 6 One Foot Connection The One Foot Connection function lets you connect your Samsung product automatically to a Samsung wireless routers If your wireless router does not support One Foot Connection you must connect using one of the other methods Z You can check for equipment that supports One Foot Connection on www samsung com How to set up using One Foot Connection Turn on the Samsung wireless router and the product Go to Network Settings screen Select One Foot Connection and press then press C4 again KR m Place the wireless router in parallel with and no farther away than 25cm about 9 3 4 inches of Samsung Wireless Adapter 7 Network 136 Network WZ If One Foot Connection does not connect your product to your Router a pop up screen appears on the screen notifying y
112. play video over a network connection the video may not play smoothly WZ e You must use the Samsung Wireless LAN adapter WISOQSABGN WISO9ABGN2 or WIS1OABGN to use a wireless network e The Samsung Wireless LAN Adapter and the USB extension Cable are sold separately and are offered by select retailers Ecommerce sites and Samsungparts com e To use a wireless network your product must be connected to a wireless IP sharer either a router or a modem If the wireless IP sharer supports DHCP your product can use a DHCP or static IP address to connect to the wireless network e Select a channel for the wireless IP sharer that is not currently being used If the channel set for the wireless IP sharer is currently being used by another device nearby this will result in interference and communication failure e Your product supports only the following wireless network security protocols o Authentication Mode WEP WPAPSK WPA2PSK o Encryption Type WEP TKIP AES e Ifyou select the Pure High throughput Greenfield 802 11n mode and the Encryption type is set to WEP TKIP or TKIP AES WPS2Mixed on your AP or wireless router Samsung product will not support a connection in compliance with new Wi Fi certification specifications e If your wireless router Supports WPS Wi Fi Protected Setup you can connect to the network via PBC Push Button Configuration or PIN Personal Identification Number WPS will automatically configur
113. power e Off Low Medium High Picture Off 8 4 2 Eco Sensor Off On To enhance your power savings the picture settings will automatically adapt to the light in the room If you adjust Backlight in the Picture menu Eco Sensor will be set to Off e Min Backlight When Eco sensor is On you can manually adjust the minimum screen brightness WZ If Eco Sensor is On the display brightness may change become slightly darker or brighter depending on the surrounding light intensity You can control the screen s minimum brightness with the Min Backlight function 8 5 System 8 4 3 No Signal Power Off To avoid unnecessary energy consumption you can set how long you want the product to remain on if it s not receiving a signal e Off 15 min 30 min 60 min WZ e Disabled when an attached PC is in power saving mode 8 4 4 Auto Power Off Off On The product will automatically turn off if you don t press a button on the remote or touch a button on product front panel within 4 hours to prevent overheating Security MENU I System Security ENTER C Every time you access the Security functions the PIN screen will appear and the default PIN number is Q O 0 0 The PIN screen closes and the Security menu appears Security Button Lock Change PIN 8 5 1 Safety Lock Off On Lock channels to prevent unauthorized users such as children from watching unsuitable pr
114. ption applies to Play Pause You can start or stop Alternatively the gt Y v Play or 11 Pause button on the remote can be used Previous Next Go to previous next photo file Shuffle You can play the music sequentially or z randomly You can restart a movie file from where you Y stopped it Scene Search You can use the Scene Search function T during playback to view or start a movie from the scene of your choice V Title Search You can move directly to another Title Time Search You can search the movie using 4 and gt buttons at intervals of 1 minute Subtitle You can view a subtitle You can select a specific language if the subtitle file contains multiple languages Repeat Mode You can play movie and music files repeatedly Picture Size You can adjust the picture size to your Z preference Picture Mode You can change the Picture Mode vv Sound Mode You can change the Sound Mode Audio Language You can enjoy video in one of supported Y languages The function is enabled only when you play stream type files which support multiple audio formats Subtitle Setting Displays the Subtitle Setting You can set up v a subtitle option 6 Media 125 Media Start Slide Show You can start or stop a slide show Stop Slide Alternatively use the gt or 1 button on the Show remote Slide Show You can select the slide show speed during Speed the slide show Alternatively use the
115. r mobile phones or the other devices such as your PC by controlling them on the product via the network IZ For more information visit www samsung com or contact the Samsung call center Mobile devices may need additional software installation For details refer to each device s user s guide e lf your Samsung product connects to a non Samsung DLNA server a compatibility issue may occur during video playback e By connecting your Samsung product to a network via AllShare you can use Samsung s original functions as follows oO El m oO oO Playback of various video formats DivX XVID MP4 3GPP AVI ASF MKV etc Video thumbnail feature Bookmark function to resume video playback Auto chaptering scene navigation Digital content management Compatibility with various subtitle formats SRT SMI SUB TXT TTXT Search with file names And many others e To use the original DLNA functions of Samsung fully it is recommended that you use the AllShare software provided with your product 4 Refer to page 138 for details about the AllShare Settings menu 6 Media 129 Network 7 1 Network Settings 7 1 1 Connecting to a Wired Network There are three ways to attach your product to your LAN using cable e You can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable See the diagram below The Modem Por
116. rd HDMI 3D format with 24Hz the product is optimized as follows e Judder Reduction Display Mode When Auto Motion Plus is set to Smooth or Custom you can watch a smooth picture without judder Before using 3D function WZ gt 3D Mode is set to its memorized configuration value automatically when you changing the input SOUICe Some Picture functions are disabled in 3D mode 4 Screen Adjustment 105 Screen Adjustment e 3D Active Glasses from Samsung s previous product IR type or other manufacturers not be supported e When the product is initially powered on may take some time until the 3D display is optimized e The 3D Active Glasses may not work properly if there is any other 3D product or electronic devices turned on near the glasses or product If there is a problem keep other electronic devices as far away as possible from the 3D Active Glasses e Some files are not supported in the 2D to 3D function e Be sure to stay within the viewing angle and optimum product viewing distance when watching 3D pictures Otherwise you may not be able to enjoy proper 3D effects e The ideal viewing distance should be three times or more the height of the screen We recommend sitting with viewer s eyes on a level with the screen 4 6 Screen Adjustment Advanced Settings MENU I Picture Advanced Settings ENTERC All Advanced Settings are available in the Standard and Movie modes To use s
117. ress Preferred DNS server 10 44 33 22 Alternate DNS server 10 33 22 11 lt Back B _ Next N gt Finish Cancel Connecting and Using a Source Device 5 Select a language The default language is English ig Magiclnfo Setup Wizard v 1 12 1 Select Language step 3 Select the language you want to install on the system for menus and dialogs Current Language Engilsh Chinese Traditional German English French Italian Japanese Russian gt 0 o 2 gt 0 5 oo000000000 m _ Chinese Simplified lt Back B Next N gt Finish Cancel Select Screen Type step 4 bd iW Landscape a Portrait lt Back B Finish Cancel Connecting and Using a Source Device Double check the settings you have just configured ie Magiclinfo Setup Wizard v 1 12 Setup Information 1 Application Magiclnfo Pro LAN WAN based version 2 Internet Protocol TCP IP IP 192 168 0 102 3 Language English 4 Screen Type Landscape Do not show again lt Back B i Finish Cancel WZ e If the execution icon does not appear double click the MagiclInfo icon on the desktop The icon will appear at the bottom right of the screen e For further details on how to use Magiclnfo refer to the Magiclnfo Lite Edition software CD provided with the network box 3 1 3 2 Using MDC MDC Multipl
118. rnal sensor board or receives the light IR AMBIENT SENSOR IN UPP SS pow i H 9 sensor signal IR OUTI Receives the remote control signal via the external sensor board and outputs the signal via LOOPOUT AUDIO OUT Connects to the audio of a source device 1 Preparations 25 Preparations RGB DVI DP HDMI Receives sound from a PC via an audio cable AUDIO IN USB eS Connect to a USB memory device DP IN Connects to a PC using a DP cable 1 Preparations 26 Preparations Assembling the Holder Wire stand Stand Sold separately 1 2 3 Anti theft Lock miz e An anti theft lock allows you to use the product securely even in public places mma e The locking device shape and locking method depend on the manufacturer Refer to the user guide provided with your anti theft locking device for details To lock an anti theft locking device Fix the cable of your anti theft locking device to a heavy object such as a desk Put one end of the cable through the loop on the other end Insert the locking device into the anti theft lock slot at the back of the product Lock the locking device e An anti theft locking device can be purchased separately e Refer to the user guide provided with your anti theft locking device for details e Anti theft locking devices can be purchased at electronics retailers or online 1 Preparations Preparations 1 2 4 Remote Co
119. s pixels Pixels are transmitted in horizontal lines which are then arranged vertically to create an image The horizontal frequency is measured in kHz and represents how many times horizontal lines per second are transmitted and displayed on the product screen A horizontal frequency of 85 means that the horizontal lines that make up an image are transmitted 85 OOO times per second and the horizontal frequency is indicated in 85kHz Vertical Frequency One image is made of numerous horizontal lines The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines A vertical frequency of 60 means that an image is transmitted 60 times per second The vertical frequency is also called refresh rate and affects screen flicker Appendix 204 Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen It represents the level of display detail A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time E g A resolution of 1920 x 1080 consists of 1 920 horizontal pixels horizontal frequency and 1 080 vertical lines vertical resolution Plug amp Play The Plug amp Play feature allows the automatic exchange of information between a product and PC to produce an optimum display environment The product uses VESA DDC international standard t
120. settings to default values WZ o The color on screen may vary with this option unintentionally 4 4 8 Reset Picture MENU Picture Reset Picture gt ENTER Resets your current picture mode to its default settings 4 Screen Adjustment 112 Sound Adjustment Configure the sound Sound settings for the product Sound Mode MENU I Sound Sound Mode ENTER Use the up and down arrow keys to select an option and then press Sound Effect n 3D Audio Speaker Settings Reset Sound Standard Selects the normal sound mode Music Emphasizes music over voices Movie Provides the best sound for movies Clear Voice Emphasizes voices over other sounds Amplify Increase the intensity of high frequency sound to allow a better listening experience for the hearing impaired If Speaker Select is set to External Sound Mode is disabled 5 2 5 3 Sound Adjustment Sound Effect MENU I Sound Sound Effect gt ENTER WZ e f Speaker Select is set to External Sound Effect is disabled e Available only when Sound Mode is set to Standard e SRS TruSurround HD Off On This function provides a virtual 5 1 channel surround sound experience through a pair of speakers using HRTF Head Related Transfer Function technology e SRS TruDialog Off On This function allows you to increase the intensity of a voice over background music or sound effectsso that dialog can
121. st e When the receiver i e Home Theater is set to On you can hear sound output from the product Optical jack When the source is a digital component such as a DVD player and it is connected to the product via HDMI you will hear only 2 channel sound from the receiver Troubleshooting for Anynet Anynet does not work Check if the device is an Anynet device The Anynet system supports Anynet devices only You can connect only one receiver home theater Check if the Anynet device power cord is properly connected Check the Anynet device s Video Audio HDMI cable connections Check whether Anynet HDMI CEC is set to On in the Anynet setup menu Check whether the remote control is Anynet compatible If you have removed and then reconnected the HDMI cable please make sure to search devices again or turn your product off and on again Check if the Anynet function of the Anynet device is set on want to start Anynet Check if the Anynet device is properly connected to the product and check if the Anynet HDMI CEC is set to On in the Anynet Setup menu Press the TOOLS button to display the Anynet menu and select a menu you want want to exit Anynet Select View PC in the Anynet menu Press the SOURCE button on the product remote control and select a non Anynet device The message Connecting to You cannot use the remote control when you are configuring Anynet device appears on Anynet
122. t are connected to form a video wall In addition display part of a whole picture or repeat the same picture on each of the connected multiple displays To display multiple images refer to MDC Help or the Magiclnfo user guide Some models may not support the Magiclnfo function WZ e f more than four displays are connected horizontally and vertically it is recommended that you use an input resolution of XGA 1024 x 768 level or higher to prevent a dark picture due to degradation in the contrast or color intensity e To play 3D content when Video Wall is set to On a multi HD player MHP is required 8 8 1 Video Wall You can activate or deactivate Video Wall To organize a video wall select On Video Wall Format Horizontal Vertical Screen Position 8 8 2 Format Select a format to display images on multiple displays e Full Display images in full screen e Natural Display images at the original resolution without enlarging or reducing 4 The Screen Position option is only enabled when Video Wall is set to On hs 8 8 3 Horizontal This function automatically divides the screen according to the specified number of horizontal displays Enter the number of horizontally arranged displays The horizontal screen will automatically be divided System according to the number entered A maximum of 15 displays can be assigned to the horizontal arrangement WZ e he screen can be divided into a maximum of 1
123. t on the Wall External Modem ADSL VDSL ail ju Hi Modem Cable LAN Cable e You can attach your product to your LAN by connecting the LAN port on the back of your product to an IP Sharer which is connected to an external modem Use LAN cable for the connection See the diagram below The Modem Port on the Wall External Modem IP Sharer ADSL VDSL having DHCP server Pee SE RERA a IT ra Modem Cable LAN Cable LAN Cable e Depending on how your network is configured you may be able to attach your product to your LAN by connecting the LAN port on the back of your product directly to a network wall outlet using a LAN cable See the diagram below Note that the wall outlet is attached to a modem or router elsewhere in your house The LAN Port on the Wall LAN Cable e Ifyou have a Dynamic Network you should use an ADSL modem or router that supports the Dynamic Host Configuration Protocol DHCP Modems and routers that support DHCP automatically provide the IP address subnet mask gateway and DNS values your product needs to 7 Network 130 Network access the Internet so you do not have to enter them manually Most home networks are Dynamic Networks Some networks require a Static IP address If your network requires a Static IP address you must enter the IP address subnet mask gateway and DNS values manually on your product Cable
124. t saved in internal memory or USB memory You can also play content via MagiclInfo Lite Server after connecting to a network WZ For further details about how to use Magiclnfo Lite Server refer to the Magiclnfo Lite Server user manual 6 2 Media Videos MENU I Media Videos ENTER C Connecting a USB Device 1 Turn on your product 2 Connect a USB device containing photo music and or movie files to the USB port on the back or side panel of the product 3 When a USB device is connected to the product the Connected Device screen appears Select a connected device and then press 6 2 1 Playing a Video Press the A VW button to select the desired video in the file list 2 Press the button or gt Play button WZ e The file name appears on the top with its playing time e If video time information is unknown the playing time and progress bar are not displayed e During video playback you can search using the lt and gt buttons e You can use the lt REW gt FF Pause Stop and Play buttons on the bottom of your remote during playback Press the RETURN button to exit the movie e Pressing the MENU button when content from a USB device is playing will stop the playback and return you to the previous input mode Supported Video Subitle Formats for language subtiles etc tenes Pome 6 Media Media Supported Video Formats File Fra
125. te with other manufacturers products e For instructions explaining how to connect Anynet external devices refer to the device s user manual You must connect an Anynet device using an HDMI cable Some HDMI cables may not support Anynet functions e Anynet works when the AV device supporting Anynet is in the standby or on status e Anynet supports up to 12 AV devices in total Note that you can connect up to 3 devices of the same type e However you can connect only one Anynet Home Theater To connect an Anynet Home Theate connect the Home Theater to the product using an HDMI cable then Anynet Menu The Anynet menu changes depending on the type and status of the Anynet devices connected to the product View PC Changes Anynet mode to PC mode Device List Shows the Anynet device list device_name MENU Shows the menu of the connected device menus E g if a DVD player is connected the disc menu of the DVD player will appear System device_name Tools Shows the tools menu of the connected device E g if a DVD player is connected the tools menu of the DVD player will appear K Depending on the device this menu may not be available m device_name Title Menu Shows the title menu of the disc in the connected device E g If a DVD player is connected the title menu of the movie in the DVD player will appear WZ Depending on the device this menu may not be available LS
126. terface 400 x 400 mm Horizontal 30 81 KHZ Synchroni Frequency Dimensions W x H x D Weight without stand Zation Vertical Frequency Seren 1920 x 1080 60Hz resolution Resolution ne 1920 x 1080 60Hz resolution Maximum Pixel Maximum Pixel Clock C 448 5MHz Anlog Dita SMHz C 448 5MHz Anlog Dita Digtal 48 75 Hz eaaa connectors D Sub DVI DP Display HDMI port 12 Specifications 194 Environme Operating Specifications Temperature 32 F 104 F 0 C 40 C ntal Humidity 10 80 non condensing considerat Temperature 4 F 140 F 20 C 60 C ions Storage J SS IN iS SS ix Humidity 5 95 non condensing Power Supply This product uses 100 to 240V Refer to the label at the back of the product as the standard voltage can vary in different countries Plug and Play This monitor can be installed and used with any Plug and Play compatible systems Two way data exchange between the monitor and PC system optimizes the monitor settings Monitor installation takes place automatically However you can customize the installation settings if desired Due to the nature of the manufacturing of this product approximately 1 pixel per million 1ppm may appear brighter or darker on the panel This does not affect product performance Class A Information Communication equipment for industrial use Attention dealers and users This device is registered f
127. th and control the product You must have a Samsung Mobile phone device which supports Wireless Remote Control For more details refer to each device s manual Reset System MENU I System Reset System ENTER C This option returns the current settings under system to the default factory settings Reset All MENU I System Reset All ENTER This option returns all the current settings for a display to the default factory settings 9 1 Support Software Upgrade MENU I _ gt Support Software Upgrade gt ENTER The Software Upgrade menu lets you upgrade your product software to the latest version e Current Version This is the software version already installed in the product We Be careful not to turn off the power until the upgrade is complete The product will turn off and on automatically after completing the software upgrade When you upgrade software all video and audio settings you have made will return to their default settings We advise you to write down your settings so that you can easily reset them after the upgrade 9 1 1 By USB To upgrade by USB follow these steps 7 Visit www samsung com 2 Download the latest USB software upgrade exe archive to your computer Q Extracts the exe archive to your computer You should have a single folder with the same name as the exe file Copy the folder to a USB flash drive Turn on the product and then insert the US
128. the player Video Decoder Audio Decoder Supports up to H 264 Level 4 1 Supports up to WMA 7 8 9 STD H 264 FMO ASO RS VC1 SP MP AP L4 WMA 9 PRO does not support 2 channel and AVCHD are not supported excess multi channel or lossless audio For XVID MPEG4 SP ASP WMA sampling rate 22050Hz mono is not Below 1280 x 720 60 frame max Supported e Above 1280 x 720 30 frame max RealAudio 10 lossless is not supported GMC 2 over is not Supported Using the Play Continuously Function Resume Play If you exit a movie when it is playing you can play the movie later from the point where you stopped it WZ The Resume function does not support multiple users It will only memorize the point where the most recent user stopped playing Select the movie file you stopped and want to resume by pressing the lt or gt button 2 Press the D Play or C button 3 Press Resume Icon on control panel for resume The Movie will begin to play from where you stopped it WZ Resume is only available when you resume playing a movie you had stopped 6 Media 119 Media Using the Scene Search function Scene Search divides a video into five chapters during playback You can then restart playback from the chapter you select WZ If the index information is damaged or unsupported you will not be able to use the Scene Search function k Select the movie file you want to play from the file list section 2 Press
129. tion guide Appendix 203 Appendix Terminology OSD On Screen Display On screen display OSD allows you to configure on screen settings to optimize the picture quality as required It allows you to change the screen brightness tint size and many other settings using menus displayed on the screen Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen Adjusting the brightness brightens the whole screen but adjusting Gamma only brightens the medium brightness Gray Scale Scale refers to levels of color intensity that show variations of color change from darker areas to brighter areas on the screen Changes to the screen brightness are expressed with black and white variation and grey scale refers to the medium area between black and white Changing the grey scale through Gamma adjustment will change the medium brightness on the screen Scanning rate Scanning rate or refresh rate refers to the frequency of screen refreshes Screen data is transmitted as it refreshes to display an image although the refreshing is invisible to the naked eye The number of screen refreshes is called scanning rate and is measured in Hz A scanning rate of 60Hz means that the screen refreshes 60 times per second The screen scanning rate depends on the performance of the graphics cards in your PC and product Horizontal Frequency Characters or images displayed on the product screen consist of numerous dot
130. tles etc or metallic objects on top of the product e Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product Then contact Samsung Customer Service Center Product failure an electric shock or fire may result Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn in or defective pixels e Activate power saving mode or a moving picture screen saver if you will not be using the product for an extended period of time Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time vacation etc Dust accumulation combined with heat can cause a fire electric shock or electric leakage Use the product at the recommended resolution and frequency e Your eyesight may deteriorate Do not hold the product upside down or move it by holding the stand e The product may fall and become damaged or cause an injury Looking at the screen too close for an extended period of time can deteriorate your eyesight Before Using the Product EDE Before Using the Product Do not use humidifiers or stoves around the product e Afire or electric shock may result Rest your eyes for more than 5 minutes for every 1 hour of product use e Eye fatigue will be relieved Do not touch the screen when the product has been turned on for
131. to the Local Schedule Manager G 20110101_1200 Isch 10 MagicInfo Lite y Magiclnfo Lite 10 4 2 Modifying a local schedule Local Schedule WZ Ensure at least one local schedule Local Schedule is registered 7 Select Local Schedule Manager in the MagicInfo Lite menu screen Local Schedule Manager 2 Select the local schedule you want to modify Local Schedule Manager Internal Memory y Magiclnfo Lite 3 Select Edit 4 Change the details of the local schedule Next select Save 10 4 3 Deleting a local schedule Local Schedule Z Ensure at least one local schedule Local Schedule is registered 7 Select Local Schedule Manager in the MagicInfo Lite menu screen fa Local Schedule Manager y Magicinfo Lite 2 Select the local schedule you want to delete 3 Select Delete Local Schedule Manager Internal Me Do you want to delete schedule y Magiclnfo Lite 10 4 4 Running a local schedule Local Schedule WZ Ensure at least one local schedule Local Schedule is registered 7 Select Local Schedule Manager in the MagicInfo Lite menu screen Local Schedule Manager 2 Select the local schedule you want to run Next select Run Local Schedule Manager y Magiclnfo Lite 10 4 5 Stopping a local schedule Local Schedule WZ This function is enabled only when a schedule is running Selecting Stop wil
132. tons or the up and down arrow keys to enter numbers Use the left and right arrow buttons to change entry fields 8 2 5 Holiday Management Timer will be disabled during a period specified as a holiday Setting Holiday Management e Add Specify the period you want to add as a holiday o Select the start and end dates of the holiday you want to add using the A V buttons and click the Save button Start Set the start date of the holiday End Set the end date of the holiday 8 3 System Delete Delete all items from the list of holidays Select Delete The message Delete all holidays will appear Select Yes All holidays will be deleted e Apply Set the On Timer and Off Timer to not activate on public holidays o Press ENTER to select the On Timer and Off Timer settings you do not want to activate o The selected On Timer and Off Timer will not activate Menu Language MENU I System Menu Language ENTER Set the menu language WZ A change to the language setting will only be applied to the onscreen menu display It will not be applied to other functions on your PC System 8 4 Eco Solution MENU II System Eco Solution gt ENTER Eco Solution Eco Sensor No Signal Power Off Auto Power Off 8 4 1 Energy Saving Save power with the Energy Saving feature While Energy Saving mode is active the product power consumption will be controlled to save
133. tput use an HDMI DVI and audio cables The picture may not display normally if at all or the audio may not work if an external device that uses an older version of HDMI mode is connected to the product If such a problem occurs ask the manufacturer of the external device about the HDMI version and if out of date request an upgrade Be sure to use an HDMI cable with a thickness of 14 mm or less Be sure to purchase a certified HDMI cable Otherwise the picture may not display or a connection error may occur A basic high speed HDMI cable or one with ethernet is recommended This product does not support the ethernet function via HDMI 2 3 3 2 3 4 Connecting and Using a Source Device Connecting an External Monitor DVI OUT Kole fee 9 AUDIO OUT The following images are for reference only Real life situations may differ from what is shown in the images The Loopout function can be used to duplicate the screen of the primary display Connect DVI OUT on the primary display to DVI IN or HDMI on another display Up to FHD resolution can be supported Compatible input sources include DVI IN DP IN and HDMI IN However up to 10 monitors can be connected in Full HD mode depending on the type of cable or signal equipment Multiple monitors that are daisy chained have a limit to the connectable monitors The DVI OUT port on this product does not support the HDCP input If the stereo cable
134. unction o The mode cannot be controlled if Video Wall is set to On o his function is not available in Magiclnfo e Viewing PIP on off state Get the PIP ON OFF Status Checksum e Setting PIP on off Set the PIP ON OFF Checksum ae PIP A code used to turn the PIP mode of a product on or off 1 PIP ON O PIP OFF C m O OFF 8C PIP A code used to turn the PIP mode of a product on or off C m x80 ERR OXF ERR A code showing what error has occurred 1 Preparations 46 Preparations Auto adjustment control PC and BNC only Function Automatically adjust the PC system screen using a PC Viewing auto adjustment state Get Auto Adjustment Status Setting auto adjustment Set Auto Adjustment Header Command Data length ate Data 1 Checksum OxAA Ox3D aie EEr Auto Adjustment Ox0O at all times C Header ible Data length Ack Nak r CMD Val nd Checksu mM OxAA OxFF 3 AY Ox3D l ue Adjustment Eon Ox3D ERR i m ERR A code showing what error has occurred 1 Preparations Preparations Video Wall Mode Control e Function Video Wall Mode can be activated on a product using a PC This control is only available on a product whose Video Wall is enabled This function is not available in Magiclnfo e Viewing video wall mode Get Video Wall Mode Checksum e Setting the video wall Set Video Wall Mode
135. ver Device ID Displays the original identification number of a device KR Oo m Mode Displays the current operating mode Network Schedule Local Schedule Internal AutoPlay or USB AutoPlay of Magiclnfo Lite Player Q Server Displays the connection status Connected Disconnected or Non approval of the server O USB Displays the connection status of a USB device 10 MagicInfo Lite 186 y MagiclInfo Lite Schedule Download Displays the progress of a network schedule being downloaded from the server i a Information Software Version A VNUSCDSP 100 Device Name Monitor Device ID FE FF FF FF FF Mode Network Schedule Server Connected USB Connected 10 8 2 Changing the settings for the content that is running WZ Press the TOOLS button on the remote control You can change the Picture Mode or Sound Mode setting or safely remove a USB device Safely Remove USB while content is playing by pressing the TOOLS button on the remote control e Picture Mode Customizes the screen settings for the content currently playing Dynamic Standard Natural Movie e Sound Mode Customizes the audio settings for the content currently playing Standard Music Movie Clear Voice Amplify e Safely Remove USB 10 MagicInfo Lite 11 1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 11 1 1 Testing the Product WZ
136. wer code to be set on a product 1 Power ON O Power OFF C mMm Power Power code to be set on a product C m oodi 1 ERR o OxFF ERR A code showing what error has occurred 1 Preparations ry Preparations Volume control Function The volume of a product can be adjusted using a PC Viewing volume state Get Volume Status Checksum Setting the volume Set Volume Checksum Volume Volume value code to be set on a product 0 100 C Header pou Data length Ack Nak r CMD Val nd Checksu 8 fw oa MA Volume Volume value code to be set on a product 0 100 m OF 0x12 2 ERR ERR A code showing what error has occurred 1 Preparations M Preparations Input source control Function The input source of a product can be changed using a PC Viewing input source state Get Inout Source Status Checksum Setting the input source Set Inout Source Header Command Data length Datalength Data Data 1 Checksum EHra Source Input Source An input source code to be set on a product ES o DVI_video HDMI1_PC and HDMI2_PC cannot be used with the Set command They only respond to Get commands o This model does not support BNC S Video HDMI2 and HDMI2_PC ports o Magiclnfo is only available with models that contain the Magiclnfo function 1 Preparations 42 Preparations Header orn Data length Ack Nak r CMD Va

Samsung ME46A manual do usuário

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung ME46A manual do usu&aacute;rio

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung ME46A manual do usuário