Home

Samsung CW29A8VD User Manual

1. Lm COLOUR TELEVISION Owner s Instructions Before operating the unit please read this manual thoroughly and retain it for future reference ON SCREEN MENUS PICTURE IN PICTURE TELETEXT WIRTVAL DOLBY 9999 5 999 Safety Instructions Do not expose the television to extreme temperature conditions or to extreme humidity conditions Do not expose the television to direct sunlight and other sources of heat Do not expose the television to any liquids Never put objects of any kind into the television and do not place a water containing vessel on the television During a storm conditions especially when there is lightning unplug the television from the mains socket and aerial Do not step on or twist the power cord Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock Please use a soft and dry cloth not containing volatile matter when you clean the TV If the television is broken do not try to repair it yourself Contact qualified service personnel If the remote control is not used for a long period of time remove the batteries and store it in a cool dry place Do not drop the remote control The lightning flash and arrow head CAUTION within the triangle is a warning sign RISK OF ELECTRIC SHOCK alerting you of dangerous voltage DO NOT OPEN inside the product The exclamation point within the CAUTION ro PREVENT ELECTRICAL SHOCK t
2. Move 4 gt Adjust MExit 15 Skipping Unwanted Channels You can exclude the channels you chosen from the channels you scanned When you scan through the stored channels those you have chosen to skip are not displayed Channel All of the channels that you do not specifically choose to skip are displayed during scanning 1 Press the MENU O00 button Result main menu is displayed 2 Press the V or A button to select Channel Result The options available in the Channel group are displayed 3 Press the lt or gt button 4 Press the V or A button to select Add Erase 5 Press the 4 or gt button Result The stored channels are displayed Move 4 Adjust MExit Add Erase 6 Press the V or A button to select the channel to add or erase If necessary select Added or Erased by pressing the 4 or gt Erased button 7 Repeat Step 6 for each channel to be added or erased Move lt gt Adjust Exit 16 Assigning Names to Channels Channel names will be assigned automatically when channel information is broadcast These names can be changed allowing you to assign new names Channel 1 Press the MENU OD button Result The main menu is displayed 2 Press the V or A button to select Channel lt gt Enter 1 Result The options available in the Channel group are displayed 3 Press the or gt button 4 Press the V or A button
3. Espafia France Italia Nederland Search Schweiz Sverige UK East Europe Auto store 6 Press the V or A button to select Search 7 Press the lt or gt button to start the search Move 4 gt Search Exit Result The horizontal bar is displayed and then channels are stored in an order which reflects their positions in the frequency range Finally the search will end automatically gt Tostop the search before it has finished press the MENU OD button 8 When searching and storing are complete the Sort menu is displayed sort the stored channels into the desired numerical order Exit go to Step 6 of the Sorting the Stored Channels procedure on page 13 To exit from the channel store function without sorting the channels press the MENU button repeatedly until the menus disappear 9 When the channels have been stored you can Sort them in the order required refer to page 13 Clear a channel refer to page 16 Assign a name to the stored channels refer to page 17 Fine tune channel reception if necessary refer to page 18 Activate the Digital Noise Reduction feature refer to page 21 Move 4 gt Adjust MExit 999 12 Sorting the Stored Channels This operation allows you to change the programme numbers of stored channels This operation may be necessary after using auto store You can delete the channels you do
4. Off 1 Press the MENU O00 button Result The main menu is displayed Move 4 Adjust MExit 2 Press the V or A button to select Setup Result The options available in the Setup group are displayed 3 Press the 4 or gt button 4 Press the V or A button to select Blue Screen 5 To activate this feature select On by pressing the lt or gt button Using the Tilt Control Feature If you find that the picture received is slightly tilted to one side you can adjust the tilt setting 1 Press the MENU 00 button Result The main menu is displayed 2 Press the V or A button to select Setup Result The options available in the Setup group are displayed Move 4 Adjust MExit 3 Press the lt or gt button 4 Press the V or A button to select Tilt 5 Press the lt or gt button to reach the required setting 7 to 7 22 Selecting the Picture Size You can select the picture size which best corresponds to your viewing requirements simply by pressing the P SIZE 3 button Depending on the model the following picture sizes are available Normal Zooml Zoom2 16 9 16 9 Panorama Zoom1 Zoom2 4 3 Auto Wide Cm Freezing the Current Picture TURBO SMENU SMODE P MODE e c DNle S CO dal PIP S Ct TVAIDEO SZE POSTION Cap Cup Cep CG You can freeze the picture when watching a television programm
5. Regular broadcast Standard audio MONO Normal use Bilingual or Dual V II DUAL I lt DUAL II Stereo STEREO MONO Forced mono If the receiving conditions deteriorate listening will be easier if the mode is set to the MONO If the stereo signal is weak and an automatic switching occurs then switch to the MONO When receiving a mono sound in the AV mode connect to the AUDIO L input connector on the panel front or side If the mono sound comes out only from left speaker press the DUAL HI button Setting the Sleep Timer You can select a time period of between 30 and 180 minutes after the television automatically switches to Standby mode by pressing the SLEEP button POWER 1 Press the SLEEP button on the remote control UM IN DUALI PSUEC3 SEPO Result If the sleep timer is not yet set off is displayed C If the sleep timer is already set the screen displays the remaining time and then before the television will CA Cae GSD be placed in standby mode Cab GD GD 2 Press the SLEEP amp button repeatedly and cycle through the preset time intervals 30 60 90 120 150 180 Off Result The television automatically switches to standby mode when the timer reaches 0 3 To cancel the sleep timer feature press the SLEEP button repeatedly and select Off 27 Setting and Displaying the Current Time You can set the tel
6. first is displayed 4 gt Adjust Exit 1 Press the MENU OD button Result The main menu is displayed 2 Press the V or A button to select Time Result The options available in the Time group are displayed 3 Press the gt button 4 gt Adjust Exit 4 Press the V or A button to select Timer 5 Press the lt or gt button to set On Result The On Time and Off Time are displayed 6 Press the V or A button to select On Time Set the time at which you wish the television to be switched on automatically Press the or gt button to move to the hour or minute Set these by pressing the V or A button Adjust 4 gt Move Exit 7 Press the V or A button to select off Time In the same above set the time at which you wish the television to be switched off automatically 4 gt Move Exit 29 Viewing the Picture In Picture PIP You can display a sub picture within the main picture of TV program or external A V devices such as VCR or DVD In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input 1 Press the MENU OD button Result The main menu is displayed 4 Enter MExit 2 Press the V or A button to select Setup Press the gt button 3 Press the V or A button to select PIP Press the lt or gt button 4 Press the 4 or gt button again to set Result The optio
7. not want to keep 1 Press the MENU OD button Result The main menu is displayed 2 Press the V or A button to select Channel Result The options available in the Channel group are displayed 3 Press the or gt button 4 Press the V or A button to select Sort 5 Press the lt or gt button Result The options available in the Sort group are displayed with From is selected 6 Select the channel number that you wish to change by pressing the 4 or gt button repeatedly 7 Press the V or A button to select To Select the new channel number which you wish to identify by pressing the lt or gt button repeatedly gt gt You can also select the channel number directly by pressing the numeric buttons 0 9 8 Press the V or A button to select Store Select to confirm the exchange of channel numbers by pressing the lt or gt button Result The selected channel is exchanged with the one previously stored to the chosen number 9 For all the channels to move to the required channel numbers repeat steps 6 to 8 after selecting the From by pressing the V or A button lt gt Enter MExit 4 gt Adjust Exit 4 gt Adjust MExit 4 gt Adjust MExit 13 Storing Channels Manually You can store up to 100 television channels including those received via cable networks Channel When storing channels manually you can choose rii Whether or not to store each
8. page sub page by entering its 4 digit number The next page page up The previous page page down Double size letters in the size Upper half of the screen Once Lower half of the screen Twice Normal screen Three times POWER ay SLEI TTX MIX EPE TURBO SMENU SMODE P MODE PIP L SWAP TVADEO SZE POSITION P Gs GD Cou 33 Using FLOF to Select a Page 2 DUALLI PSE TIX MIX SLEEP amp 2 PIP STILL SWAP CON CD Ca The various topics included in the teletext pages are color coded and can be selected by pressing the colored buttons on the remote control Display the teletext contents page by pressing the TTX MIX amp V CA button Press the coloured button corresponding to the topic that you wish to selectithe available topics are given on the status line Result The page is displayed with other coloured information that can be selected in the same way To display the previous or next page press the corresponding coloured button To display the subpage see the following steps Press the sub page button Result The available subpages appear Select the required sub page Sub pages can be scrolled
9. surround is set to On or Off these settings apply to the sound effects such as Standard Music Movie and Speech SVE 1 Press the MENU OD button Result The main menu is displayed 2 Press the A or V button to select Sound Result The options available in the Sound group are displayed 4 gt Adjust Exit 3 Press the or gt button 4 Select the required option auto volume Melody Pseudo stereo Or Virtual surround by pressing the V or A button 5 To activate each feature select On by pressing the lt or gt button 0 n gt Manufactured under license from 1 Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby 1 Laboratories Move 4 gt Adjust MExit 25 Selecting the Sound Mode depending on the model SLEEP DUALHI 52 09 Type of broadcast The DUAL LII button displays controls the processing and output of the audio signal When power is switched on the mode is automatically preset to either Dual I or Stereo depending on the current transmission On screen indication CH Cm 29 GD 59 CoD Regular broadcast Standard audio MONO Normal use Regular 4 NICAM Mono MONO Normal MONO lt gt NICAM NICAM Stereo MONO Normal STEREO NICAM NICAM Dual I II DUAL I gt DUAL II gt Mono NICAM NICAM Normal 1 ij A2 Stereo 26
10. the cover by aligning it with the base of the remote control and pressing it back into place Connecting to an Aerial or Cable Television Network To view television channels correctly a signal must be received by the set from one of the following sources An outdoor aerial Acable television network A satellite network 1 In the first three cases connect the aerial or network input cable to the 750 coaxial socket on the rear of the television Rear of the TV VHF UHF 2 If you are using an indoor aerial you may need to turn it when tuning your television until you obtain a picture that is both sharp and clear For further details refer to Storing Channels Automatically on page 12 Storing Channels Manually on page 14 Cable Television Network Switching Your Television On and Off The mains lead is attached to the rear of your television G8 you have purchased this television in the United Kingdom refer to page 39 for further instructions on plug wiring PSZEC 1 Plugthe mains lead into an appropriate socket Ca E 2 gt main voltage is indicated on the rear of the television C29 C39 and the frequency is 50 or 60Hz 49 C59 CED 2 Press the button On Off on the front of the television Result The Standby indicator on the front of the television lights up 3 Press the POWE
11. R 2 button on the remote control to switch the television on Result The programme that you were watching last is re selected automatically gt gt f you have not yet stored any channels No clear picture appears Refer to Storing Channels Automatically on page 12 or Storing Channels Manually on page 14 4 To switch your television off press the CD button On Off again Placing Your Television in Standby Mode Your television can be placed in Standby mode in order to reduce Power consumption Wear of the cathode ray tube The Standby mode can be useful when you wish to interrupt viewing temporarily during a meal for example 1 Press the POWER button on the remote control Result The screen is turned off and the Standby indicator on the front of the television lights up in red 2 To switch the television back on simply press the POWER button again gt You can also switch on by pressing the PO or button not leave your television in Standby mode for long periods of time when you are away on holiday for example Turn your television off by pressing the D button On Off on the front of the television It is best to unplug the set from the mains and aerial Becoming Familiar with the Remote Control The remote control is used mainly to Change channels and adjust the volume Setup the television using the on screen menu system m The follow
12. TIX MIX channel reception must be stable otherwise Information may be missing DUALLI PSZEC3 Some pages may not be displayed 1 Select the channel providing the Teletext service using the or button 2 Press the TTX MIX 25 2 button to activate the teletext mode Result The contents page is displayed It can be redisplayed at any time by pressing the index button 3 If you wish to display the actual broadcast at the same time as the teletext page press the TTX MIX ES C2 button again 4 Press the TV button to exit from the teletext display Selecting a Page by Number You can enter the page number directly by pressing the numeric buttons on the remote control 1 Enter the three digit page number given in the content by pressing the corresponding numeric buttons Result The current page counter is incremented and the page is then displayed 2 If the selected page is linked with several secondary pages the secondary pages are displayed in sequence To freeze the display on a given page press the hold Press the hold again to resume Using the various display options To display Press the Both teletext information and TTX MIX amp y C2 the normal broadcast twice Hidden text reveal answers to quiz games for example The normal screen reveal again A secondary
13. badjust Exit 5 Press the 4or button to move to the hour or minute Set the hour or minute by pressing the V or A button gt gt Refer to Setting and Displaying the Current Time on page 28 6 When you have finished press the MENU LIII button Result The message Enjoy your watching is displayed and then the channel which has been stored will be activated 7 If you want to reset this feature 1 Press the MENU button 2 Press the V or A button to select Setup and then press the lt P button Result The Plug amp Play is selected Move 4PEnter MExit 3 Press the 4or gt button again Result This feature starts with the message Plug amp Play is displayed 10 Viewing the Demonstration To become familiar with the various menus provided by your television you can view the inbuilt demonstration 1 Press the MENU OD button Result The main menu is displayed 2 Press the V or A button to select Setup Result The options available in the Setup group are displayed TURBO SMENU SMODE 3 Press the lt or gt button 4 Press the V or button to select Demonstration 5 Press the 4 or gt button Result Each of the menu options is displayed in turn gt gt When you wish to exit from the demonstration press the EXIT button on the remote control Move 4 Enter Choosing Your Language When you start using you
14. by using the TURBO Red or S MENU Green button Storing Teletext Pages DUALI II SLEEP DNle 5 5 CON Cs 34 You can store to four teletext pages to display them later at leisure Select the LIST mode using the amp J button Result Four 3 digit numbers are displayed in different colours gt gt The button is used to switch between the LIST and FLOF modes Press the coloured button corresponding to the page that will be replaced Enter the new page number using the numeric buttons Repeat steps 2 and 3 for each page to be stored using a different coloured button each time Press the Ed store button until the corresponding blocks blink Connecting to the External Input Outputs gt 3 1 is used for the equipment with an RGB output such as video game devices or video disc players Rear of the TV D e tS E cH 2 be Decoder Video game device 3 RGB Video disc player D This end can be fitted with A SCART connector Satellite receiver Three RCA connectors Video Audio L and If you have a second VCR and wish to copy cassettes tape connect the source VCR to 1 and the target VCR to 32 so that you can redirect the signal from C91
15. e simply by pressing the STILL button gt gt To return to normal viewing press this button again Changing the Sound Standard You can select the type of special sound effect to be used when watching a given broadcast 4 Standard 1 Press the MENU OD button SERES Result The main menu is displayed 2 Press the V or A button to select Sound Result e E available in the Sound group are 2 iove TANE 3 Press the or gt button TURBO SMENU SMODE P MODE Result The Mode is selected DNe STUL 4 4 Select the required sound effect by pressing the gt button STILL SWAP Result The followi d effect ilable SZE POSTMON esu e following sound effects are available CEP SD GO Standard Music Movie Speech SVE Custom SvE SAMSUNG Voice Enhancement Technic gt gt You can also set these options simply by pressing the S MODEQ 2 F Sound Mode button 23 Adjusting the Sound Settings The sound settings can be adjusted to suit your personal preferences 1 Press the MENU OD button Result The main menu is displayed 2 Press the V or A button to select Sound Result The options available in the Sound group are displayed lt gt Enter Exit 3 Press the 4 or gt button 4 Press the V or A button to sel
16. ect Equalizer 5 Press the button Result The options available in the Equalizer group are displayed gt gt You can also display this group simply by pressing the AN S MENU Sound Menu button Adjust 4 gt Exit 6 Select the option to be adjusted by pressing the 4 or gt button Press the V or A button to reach the required setting gt gt If you make any changes to these settings the sound standard is automatically switched to Custom Selecting the Turbo Sound This feature suitably emphasizes both higher and lower bands of sound and includes other effects You can enjoy more magnificent and dynamic sound when watching music movie or other channel simply by pressing the TURBO button 24 Extra Sound Settings Auto volume Each broadcasting station has its own signal conditions and so it is not easy for you to adjust the volume every time the channel is changed This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low Melody You can hear clear melody sound when the television is powered on or off Pseudo stereo Virtual surround Pseudo stereo feature converts a monaural sound signal into two identical left and right channels Once the Pseudo stereo or Virtual
17. el gt gt actual configuration on your TV may be different depending on your model Control Panels CW29A10 WS32A10 TVNIDEO 5 1 Remote Control Sensor 5 Menu Display 2 Standby Indicator 6 Volume Adjustment 3 Power On Off 7 Channnmel Selection 4 Input Source Selection Connection Panels Side of the TV Rear of the TV A uc Audio Input R 1 o ZN MONO Ge R vibEo2 fN Video Input ad INPUT RGB S Video Input INPUT SCART Audio m Video Input Output C3 2 AUD GUT TLBEBEBBEBE Headphone connector Monitor Audio Output 75Q Coaxial Connector for Aerial Cable Network Infrared Remote Control TELEVISION STAND BY PICTURE SIZE TELETEXT SIZE SELECTION SOUND MODE SELECTION TELETEXT SUB PAGE DIRECT CHANNEL SELECTION ONE TWO DIGIT CHANNEL SELECTION TELETEXT PAGE HOLD VOLUME INCREASE TEMPORARY SOUND SWITCH OFF VOLUME DECREASE TUNER CABLE NETWORK SELECTION MENU DISPLAY PROGRAMME SELECTION BY NAME MOVE TO THE REQUIRED MENU OPTION ADJUST AN OPTION VALUE RESPECTIVELY SOUND MENU DISPLAY TURBO SOUND FASTEXT TOPIC SELECTION STILL PICTURE DNIe ON OFF DEMO PO he DUAL 57 SEPO 85 M 098 n ee Pog e All i SWAP
18. evision s clock so that the current time is displayed by pressing the INFO button You must also set the time if E you wish to use the automatic on or off timers m 4 0 1 Press the MENU OD button A A A a AEn ter Result main menu is displayed gt gt When pressing the O button On Off on the front of the television the clock setting will be reset 2 Press the V or A button to select Time Result The options available in the Time group are displayed 3 Press the lt or gt button Result The Clock is selected 4 Press the lt or button to move to the hour or minute Set the hour or minute by pressing the V or A button Move 4 Adjust Exit 5 When you have finished press the TV button to exit 6 Press the INFO C3 button display the channel information Once display the current time Twice remove the display Three times Adjust lt gt Move Exit 28 Switching the Television On and Off Automatically You can set the On Off timers so that the television will Switch on automatically and tune to the channel of your choice at the time you select Switch off automatically at the time you select gt gt first step is to set the television s clock refer to Setting and Displaying the Current Time on the previous page If you have not yet set the clock the message Set the clock
19. ferent mains socket Blurred or snowy picture Check the direction location and connections of your aerial distorted sound This interference often occurs due to the use of an indoor aerial Remote control malfunctions Replace the remote control batteries Clean the upper edge of the remote control transmission window Check the battery terminals Wiring the Mains Power Supply Plug UK Only IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse The value of the fuse is indicated on the pin face of the plug and if it requires replacing a fuse approved to BSI1362 of the same rating must be used Never use the plug with the fuse cover omitted if the cover is detachable If a replacement fuse cover is required it must be of the same colour as the pin face of the plug Replacement covers are available from your dealer If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point you should obtain a suitable safety approved extension lead or consult your dealer for assistance However if there is no alternative to cut off the plug remove the fuse and then safely dispose of the plug Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord IMPORTANT The wires in the mains lead are coloured in accordance with the following code BLUE NEUTRAL BROWN LIVE As t
20. hese colours may not correspond to the coloured markings identifying the terminals in your plug proceed as follows The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED WARNING DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN AND YELLOW 39 AFTER SALES SERVICE Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present ELECTRONICS AA68 03092A 00
21. i Con D GD IVMDEO SZE POSTON Cap Ge ROC Ou TELETEXT DISPLAY MIX BOTH TELETEXT INFORMATION AND THE NORMAL BROADCAST AUTOMATIC SWITCH OFF TELETEXT STORE SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED NEXT CHANNEL TELETEXT NEXT PAGE EXTERNAL INPUT SELECTION TELETEXT MODE SELECTION LIST FLOF PREVIOUS CHANNEL TELETEXT PREVIOUS PAGE INFORMATION DISPLAY TELETEXT REVEAL EXIT FROM ANY DISPLAY CHANGE CONFIRMATION SOUND EFFECT SELECTION PICTURE EFFECT SELECTION 1 PIP FUNCTIONS 1 PIP ON OFF STILL INTERCHANGE THE MAIN AND SUB PICTURE SWAP SOURCE SELECTION TV VIDEO SIZE SELECTION SIZE LOCATION SELECTION POSITION CHANNEL SELECTION P The performance of the remote control may be affected by bright light ja ed Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you Purchase the television a o Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol 3 downwards and then pulling firmly to remove it 2 Insert two 4 AAA 1 5V or equivalent batteries taking care to respect the polarities onthe battery against on the remote control the battery against on the remote control 3 Replace
22. ing table presents the most frequently used buttons and their functions DUALI I Button Viewing Function Menu Function Used to display the next stored channel Used to display the previous stored channel C0 1t0C9 Used to display the corresponding channels Used to select a channel numbered ten or over Press this button and the symbol is displayed Enter the two digit channel number PRE CH Press the PRE CH button The TV will switch to the last channel viewed To quickly switch between two channels that are far apart tune to one channel then use the number button to select second channel Then use the PRE CH button to quickly alternate between them SMENU SMODE P MODE e Used to increase the volume Used to decrease the smu SWAP volume o TVMDEO SZE POSTON Cap Ca C Ce MUTE Used to switch the sound off temporarily gt gt Totum the sound back on press this button again or press the or button MENU Used to display the Used to return to the previous on screen menu system menu or normal viewing Used to Display a submenu containing selections for OA the current menu option Increase decrease a menu option value Q Used to confirm your choice ENTER EXIT Used to exit from the menu Sys
23. lly een 12 m Sorting the Stored Channels iater cdl ane Eales 13 m Storing Channels Manually essen 14 m Skipping Unwanted Channels sese ene 16 m Assigning Names to Channels sseeee ens 17 m Fine Tuning Channel 18 USING YOUR TELEVISION m Changing the Picture Standard ssssssseeenen 19 m Adjusting the Picture Settings eene cnt eset aen eias 20 m Extra Picture Settings eene nennen 21 Digital NR LNA DNle Scan mode m Setting the Blue Screen ssssssssse eene mener 22 m Using the Tilt Control Feat re ee core e bance eked deen 22 m Selecting the Picture SiZ cee ceecceceeeeee cee eeeeceeeeeeeaeeeeeecaeseaaeeneesaeeeeeeeaes 23 Freezing the Current Pictute sic sins nia Perpetuae 23 m Changing the Sound Standard sessssssee eene 23 m Adjusting the Sound Settings 24 m Selecting the Turbo Sound sse eene 24 Exira Sound Sellings uie e tete foe e terc reduc i E rarus 25 Auto volume Melody Pseudo stereo Virtual surround m Selecting the Sound Mode depending on the model 26 Contents continued UsiNG YOUR TELEVISION continued m Setting the Sleep Timer sese m Set
24. ns available in the PIP group are displayed 5 Press the V or A button to select Select Find a source of sub picture by pressing the lt or gt button Result The sources are displayed in the following order Move 4 gt Adjust Exit TV AV1 AV2 S Video 6 Press the or A button to select Prog No If you are watching TV program select the channel that you want to view through a sub picture by pressing the lt or gt button gt gt When the source of the sub picture Select is set to TV you can select the channel of the sub picture 7 Press the V or A button to select Size Select a size of sub picture by pressing the lt or gt button Move 4 Adjust Exit Result sizes are displayed in the following order Double Large Small 16 PIP gt gt 16 PIP You can view up to 16 memorized channels on the sub picture spontaneously Onthe condition of 16 PIP it is impossible to execute swap still and locate Move 4 Adjust Exit Move 4 gt Adjust MExit 30 Viewing the Picture In Picture PIP continued Easy functions of remote control Buttons Feature PIP ON Used to activate or deactivate the PIP function directly STILL Used to freeze the sub picture SWAP Used to interchange the main picture and the sub picture gt gt When the main picture is in the Video mode and the sub picture is
25. of the channels found The programme number of each stored channel which you wish to identify 4 Enter M Exit 1 Press the MENU OD button Result The main menu is displayed 2 Press the V or A button to select Channel Result The options available in the Channel group are displayed 3 Press the lt or gt button Move 4 Adjust MExit 4 Press the V or A button to select Manual store 5 Press the 4 or gt button Manual store Result The options available in the Manual store group are displayed with Prog No is selected 6 To assign a programme number to a channel press the button 7 Press the V or A button to select Colour system Indicate the broadcasting standard required by pressing the lt or gt button Move lt gt Adjust Exit repeatedly Result The colour standards are displayed in the following order Manai store Auto PAL SECAM NT4 43 8 Press the V or A button to select Sound system Select the sound standard required by pressing the lt or gt button repeatedly Result The sound standards are displayed in the following order BG DK I L 4 Adjust MExit 14 Storing Channels Manually continued If you know the number of the channel to be stored see the following steps Press the V or A button to select Channel Press the gt button Pres
26. pplied with your equipment for detailed connection instructions and associated safety precautions 36 Connecting Headphones You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room Side of the TV 1 Plug a set of headphones into the 3 5 mm mini jack socket of the Q television Result The sound is heard through the headphones 2 When you wish to hear the sound through the speakers again simply disconnect the headphones gt gt Prolonged use of headphones at a high volume may damage your hearing Viewing Pictures From External Sources Once you have connected up your various audio and video systems you can view different sources by selecting the appropriate input 1 Check that all the necessary connections have been made 2 Switch your television on then press the VIDEO J button repeatedly Result The input sources are displayed in the following order AV1 AV2 S Video Option gt gt Depending on the source selected the pictures may appear automatically gt watch television programmes again press the TV D button and select the number of the channel required 37 Automatic Degaussing to Remove Colour Patches A degaussing coil is mounted around the picture tube so you do not normally need to degauss the television manually If you move the
27. r television for the first time you must select the language which will be used for displaying menus and indications 1 Press the MENU OD button Result The main menu is displayed 2 Press the V or A button to select Setup Move 4 Enter Exit Result The options available in the Setup group are displayed 3 Press the or gt button 4 Press the V or A button to select Language 5 Select the appropriate language by pressing the lt or button repeatedly 11 Storing Channels Automatically You can scan for the frequency ranges available to you and availability depends on your country Automatically allocated programme numbers may not correspond to actual or desired programme numbers However you can sort numbers manually and clear any channels you do not wish to watch Channel 1 Press the MENU OD button Result The main menu is displayed Move 4 Enter Exit 2 Press the V or A button to select Channel Result The options available in the Channel group are displayed Auto store Country Others 3 Press the lt or gt button Result The Auto store is selected 4 Press the lt or gt button again Move 4 Adjust Exit Result options available in the Auto store group are displayed with Country is selected 5 Select your country by pressing the lt or button The countries are displayed in the following order Others Belgie Deutschland
28. rianele isa DO NOT REMOVE REAR COVER NO USER ne TB 8 SERVICEABLE PARTS INSIDE REFER SERVICING TO DPIDIBOHSHE HISHCUTONS QUALIFIED SERVICE PERSONNEL accompanying the product WARNING TO PREVENT DAMAGE WHICH MAY RESULT main voltage is indicated on the IN FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS rear of the TV set and the frequency is APPLIANCE TO RAIN OR MOISTURE 50 or 60Hz Contents FOREWORD m Safety Instructions enemies 2 a es E 2 CONNECTING AND PREPARING YOUR TELEVISION m View of Your Television depending on the 5 a Infrared Remote Control e dees HA en en he needed 6 m Inserting the Batteries in the Remote 7 m Connecting to an Aerial or Cable Television 7 m Switching Your Television On and Off sssssssssseeeee 8 m Placing Your Television in Standby 8 m Becoming Familiar with the Remote Control see 9 mi Plug S Play Feature ies cette rompe atate eed nr iU dre 10 m Viewing the Demonstration ccceccceececceeceeeeeeenceee enne enne enn 11 Choosing Your Language eot rid dace th 11 SETTING THE CHANNELS m Storing Channels Automatica
29. rithm gives brighter clearer much detailed image to you DNle technology will fit every signals into your eyes Scan mode You will normally find that scan mode is best set to Natural to reduce any slight picture flicker However it is possible that some occasional broadcasts NTSC M may benefit by changing the scan mode Natural Digital and Progressive modes are available 1 Press the MENU OD button Result The options available in the Picture group are displayed 2 Press the gt button 3 Select the required option Digital NR LNA DNIe or Scan mode by pressing the V or A button 4 Press the lt or gt button to change the setting Digital NR Off On activating LNA Off or On activating DNIe Off Demo or On activating gt gt You can also set these options simply by pressing the DNle button Scan mode Natural Digital Or Progressive Picture Digital NR Move 4 Adjust Exit Picture 4 gt Adjust MExit Picture 4 gt Adjust Exit Picture TURBO SMENU SMODE P MODE c ce SUL PP s wA Cu Cm Co TVMDEO SZE POSTION Cu Cua 21 Setting the Blue Screen If no signal is being received or the signal is very weak a blue screen automatically replaces the noisy picture background If you wish to continue viewing the poor picture you must set the Blue Screen mode to
30. s the V or A button to select Air channel or s Cable channel Press the gt button Press the V or A button to select indicate the required number gt gt You can also select the channel number directly by pressing the numeric buttons 0 9 gt gt f no sound or abnormal sound re select the sound standard required 10 If you do not know the channel numbers select Search by pressing the V or A button Press the 4 or gt button to start the search Result The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen 11 To store the channel and associated programme number select Store by pressing the V or A button Press the lt or gt button to select OK 12 Repeat Steps 9 to 11 for each channel to be stored ag Channel mode P Programme mode When completing tuning the broadcasting stations in your area have been assigned to position numbers from to max P99 You can select a channel by entering the position number in this mode Real channel mode You can select a channel by entering the assigned number to each air broadcasting station in this mode 5 Cable channel mode You can select a channel by entering the assigned number for each cable channel in this mode Manual store Channel Adjust lt gt Move Exit Manual store Move 4 gt Search Exit Manual store
31. select the option Contrast Brightness Sharpness Colour Colour tone or Tint NTSC only to be adjusted Press the 4 or gt button Result The horizontal bar is displayed Move the horizontal n R lt Adjust Meit bar s cursor left or right by pressing the lt or gt button Contrast 70 pur gm pt gt gt If you make any changes to these settings the picture standard is automatically switched to Custom The television has an automatic degaussing system that is activated if magnetic interference is present Color tone To degauss the television screen switch power off by Ed pressing the D On Off button on the front panel Refer to Automatic Degaussing to Remove Colour Patches on page 38 Cool 20 Extra Picture Settings Digital NR If the signal received by your television is weak you can activate this feature to reduce any static and ghosting that may appear on the screen LNA Low Noise Amplifier This function is very useful in the situation that the TV is used in weak signal LNA amplifies the TV signal in the weak signal area but not noise This feature is working only weak signal condition and that is memorized on current channel additional DNIe Digital Natural Image engine DNie This feature bring you more detailed image with 3D noise reduction detail enhancement contrast enhancement and white enhancement New image compensation Algo
32. ssing the lt or gt button 7 To memorise adjusted picture or sound select Store by pressing the V or A button Press the or gt button Fine tune CAT Result OK is displayed 8 To erase adjusted picture or sound select Erase by pressing the V or A button Press the lt or gt button Result OK is displayed Adjust MExit Fine tune lt gt Adjust Exit 18 Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements 1 Press the MENU OD button Result The options available in the Picture group are displayed 2 Press the lt or gt button Result The Mode is selected 3 Select the required picture effect by pressing the lt or gt button repeatedly Result The following picture effects are available Dynamic Standard Movie Custom gt You can also set these options simply by pressing the P MODE A Picture Mode button Adjusting the Picture Settings Your television has several settings which allow you to control picture quality Picture 1 Press the MENU OD button Result The options available in the Picture group are displayed 2 Press the 4 or gt button 4 gt Enter Exit 3 Press the V or A button to select Adjust 4 Press the 4 or gt button Result The options available in the Adjust group are displayed 5 Press the V or A button to
33. television to a different position and color patches appear on the screen you must Switch the television off by pressing the On Off button on the front panel Unplug the television from the wall socket Leave the television power off for about 30 minutes so that the automatic degauss function can be activated and then press the POWER button on the remote control it your television will be left unattended press the D On Off button to turn your television off Troubleshooting Before Contacting Service Personnel Before contacting Samsung after sales service perform the following simple checks If you cannot solve the problem using the instructions below note the model and serial number of the television and contact your local dealer No sound or picture Check that the mains lead has been connected to a wall socket Check that you have pressed the button On Off and the POWER button Check the picture contrast and brightness settings Check the volume Normal picture but no sound Check the volume Check whether the MUTE button on the remote control has been pressed No picture or black and white picture Adjust the colour settings Check that the broadcast system selected is correct Sound and picture interference Tryto identify the electrical appliance that is affecting the television then move it further away Plug your television into a dif
34. tem and return to normal viewing directly TV Used to switch the Used to exit from the menu television on when it is system and return to normal in Standby mode viewing directly Plug amp Play Feature When the television is initially powered on three basic customer settings proceed automatically and subsequently setting the 1 If the television is in Standby mode press the POWER button REC on the remote control Result The message Plug amp Play is displayed It flickers for mmm a little while and then Language menu is automatically displayed 2 Select the appropriate language by pressing the V or A button RULOUSEOES Press the MENU OD button to enter the language Result The message Ant Input Check is displayed gt gt If any language is not selected on the Language menu the Language menu will disappear about 30 seconds later 3 Make sure that the antenna is connected to the TV Press the lt or gt button Move Adjust MExit Result The Auto store menu is displayed with Country is selected 4 Select your country by pressing the 4 or gt button To search the channels select Search by pressing the V or A button and then press the 4 or gt button Press the MENU button to stop the Search Result The Time menu is displayed with Clock is selected gt gt Refer to Storing Channels Automatically on page 12 lt
35. the TV mode you might not hear the CO C2 sound of main picture when pressing the SWAP C3 button after changing the sub picture channel At this time reselect the channel of main picture TVNIDEO Used to assign a source of sub picture TV AV1 AV2 or S Video SIZE Used to select a size of sub picture Double Large Small Or 16 PIP POSITION Used to move the sub picture counterclockwise Used to select the channel of sub picture 31 Teletext Feature Most television channels provide written information services via teletext Information provided includes Television programme times News bulletins and weather forecasts Sports results 5 o Travel information This information is divided into numbered pages see diagram Part Contents Selected page number Broadcasting channel identity Current page number or search indications Date and time Text Status information FASTEXT information mmo O Wv gt It can be diffrent from depending on TTX source YY Teletext information is often divided between several pages displayed in sequence which can be accessed by Entering the page number Selecting a title in a list Selecting a coloured heading FASTEXT system Displaying the Teletext Information You can display Teletext information at any time on your television For Teletext information to be displayed correctly 2
36. ting and Displaying the Current Time sss m Switching the Television On and Off m Viewing the Picture In Picture USING THE TELETEXT FEATURE Teletext Eeatule oorr tbc med seri thm eia EE TE EP ees Displaying the Teletext Information s Selecting a Page by Number seen Using FEOF to Select a Storing Teletext Pages sssssesseseseeeeenenneeen nennen nnne enn ADDITIONAL INFORMATION ON CONNECTIONS m Connecting to the External Connecting to the Audio Output essseeeenens Connecting to the RCA Inplt renta ionic ette tea bends Connecting to the S Video Input Connecting Headphones ee BR RULES Viewing Pictures From External Sources sse RECOMMENDATIONS FOR USE m Automatic Degaussing to Remove Colour m Troubleshooting Before Contacting Service m Wiring the Mains Power Supply Plug UK Symbols A rS gt Press Important Note 27 28 29 30 32 32 33 34 34 35 35 36 36 37 37 38 38 39 View of Your Television depending on the mod
37. to 2 If you have a decoder connect the decoder to the VCR and the VCR to the television When you wish to record a programme connect the receiver to 1 and the VCR to L3 2 so that you can redirect the signal from C91 to C32 Connecting to the Audio Output gt The MONITOR AUDIO OUT RCA connectors are used for equipment such as an audio system to take full advantage of the Surround sound effect Rear of the TV MONITOR Audio system AUDIO OUT 35 Connecting to the RCA Input gt RCA VIDEO and AUDIO L R connectors are used for equipment such as camcorders video disc players and some video game devices Camcorder 224 Lr N Side of the TV Video game device 2 gt AUDIO fN INPUT Video disc player gt S VIDEO and RCA AUDIO L R connectors are used for equipment with an S Video output such as a camcorder or VCR Side of the TV Camcorder S VIDEO gt INPUT He Dum mq gt B D To play pictures and sound both the S VIDEO and RCA connectors must be used gt When both the side AV and rear connectors are connected to external equipments the side AV receives priority Whenever you connect an audio or video system to your television ensure that all elements are switched off Refer to the documentation su
38. to select Name 5 Press the gt button Result The current channels are displayed 6 If necessary select the channel to be assigned to a new name by 4 gt Adjust Exit pressing the V or A button 7 Press the 4 or gt button 8 Press the V or A button to select a letter A Z a number 0 9 or a symbol space Move on the previous or next letter by pressing the lt or gt button 9 Repeat Steps 6 to 8 for each channel to be assigned to a new name 4 gt Move Exit 17 Fine Tuning Channel Reception If the reception is clear you do not have to fine tune the channel as this is done automatically during the search and store operation If the signal is weak or distorted you may have to fine tune the channel manually 1 Press the MENU OD button Result The main menu is displayed 2 Press the V or button to select Channel Result The options available in the Channel group are displayed 3 Press the lt or gt button 4 Press the V or A button to select Fine tune 5 Press the 4 or gt button Result The options available in the Fine tune group are Lyc ae adjust displayed with Tune is selected n 6 To obtain a sharp and clear picture and good sound quality press the button Fine tune CO E Result The horizontal bar is displayed Move the horizontal bar s cursor left or right by pre

Samsung CW29A8VD User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents