Home

Samsung 24" Professional UHD Monitor with multi-tasking functionality User Manual

1. A e The function may not be supported depending on the ports provided with the product e Changing the screen size is available when the following conditions are satisfied o A digital output device is connected using the HDMI DP MINI DP cable o The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of these signals o This can only be set when the external input is connected through HDMI DP MINI DP and PC AV Mode is set to AV 4 Press to move to the option you want and press a c 5 The selected option will be applied 3 12 Screen Setup Screen Adjustment 3 12 1 Configuring H Position amp V Position H Position Move the screen to the left or right V Position Move the screen up or down y This menu is only available when Picture Size is set to Screen Fit in AV Mode When a 480P or 576P LA or 720P or 1080P signal is input in AV mode and the monitor can display normally select Screen Fit to adjust horizontal position in 0 6 levels Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e e to move to Picture and press Q c on the product 3 Press e e to move to Screen Adjustment and press t c on the product 4 Press e to move to H Position or V Position and press 0 0 The following screen will appear U24E850R U32E850R U2
2. 1 Preparations 29 Preparations 1 3 3 Installing a Wall mount Kit or Desktop Stand U24E850R U28E850R U32E850R Q Attach the wall mount kit or desktop stand here O Wall mount bracket optional Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall mount kit or desktop stand you want to attach Notes Using a screw longer than the standard length can damage the internal components of the product The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications Do not use screws that do not comply with the VESA standards Do not attach the wall mount kit or desktop stand using excessive force The product may get damaged or fall and cause personal injury Samsung shall not be held liable for any damage or injury caused by using improper screws or attaching the wall mount kit or desktop stand using excessive force Samsung shall not be held liable for any product damage or personal injury caused by using a wallmount kit other than the one specified or from an attempt to install the wall mount kit on your own To mount the product on a wall ensure you purchase a wall mount kit that can be installed 10 cm or farther away from the wall Be sure to use a wall mount kit that complies with the standards To install the product on a wall usi
3. 1 Press e e to display the language settings menu 2 To hide the information message press M or 5 0 A e Ifthe optimum resolution is not selected the message will appear up to three times for a specified time even when the product is turned off and on again e The optimum resolution can also be selected in Control Panel on your PC 2 Connecting and Using a Source Device 43 3 1 Screen Setup Configure the screen settings such as brightness A detailed description of each function is provided Refer to your product for details SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used Z This menu is not available when Smart Eco Saving is enabled K e This menu is not available when fA G cAngle is enabled This menu is not available when Game Mode is enabled e This menu is not available when Eye Saver Mode is enabled Not available when PIP PBP Mode is set to On You can customize the brightness to suit your preferences 3 1 1 Configuring SAMSUNG MAGIC Bright 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e to move to Picture and press H C on the product 3 Press e e to move to MaGiceright and press 37 03 on the product The following screen will appear U24E850R U32E850R Set to an optimu
4. Select the position of Select the position of the sub screen from the sub screen from PIP PBP Mode On the available options PIP PBP Mode the available options Size Size Position Position Sound Source Sound Source Source Source p Main f T Picture Size HDMI Picture Size Contrast Contrast Sub DisplayPort HH H H BH O fh se me 4 Press to move to the option you want and press 3 0 5 The selected option will be applied K e _ Not available when PBP is selected e The screen may flicker if the input signal is unstable 4 Configuring the PIP PBP Settings 65 Configuring the PIP PBP Settings 4 1 4 Configuring Sound Source Set which screen you want to hear the sound for 1 Press any button on the front of the product to display the Function Key Guide Next press IJ to display the corresponding menu screen 2 Press e e to move to PIP PBP and press 3 0 on the product 3 Press e to move to Sound Source and press Hc on the product The following screen will appear WZ The white area of the icon means that the Sound Source comes from the main screen sub screen or the left right screen PIP U24E850R U28E850R U32E850R Set which screen you Set which screen you want to hear the want to hear the PIP PBP Mode On sound for PIP PBP Mode sound for Size EE Size Position Position Sound Source Sound Source Source Source Main Picture Size HD
5. The color and the appearance may differ depending on the product and the specifications are subject to change without prior notice to improve the performance BN46 00482B 05 Table Of Contents BEFORE USING THE PRODUCT N Copyright Icons used in this manual N Cleaning 8 9 Securing the Installation Space 9 Precautions for storage 0 Safety Precautions 10 Symbols 14 Electricity and Safety 12 Installation and Safety 14 Operation 17 Correct posture to use the product PREPARATIONS 18 Checking the Contents 18 Checking the Components 19 Parts 19 Frontal Button 24 Reverse Side 27 Installation 27 Removing the Stand 28 Installing the Wall Mount 30 Installing a Wall mount Kit or Desktop Stand 31 Adjusting the Product Tilt and Height 31 Rotating the Monitor Screen 32 Anti theft Lock 33 MagicRotation Auto 34 Rotating the monitor CONNECTING AND USING 35 Before Connecting A SOURCE DEVICE 35 Pre connection Checkpoints Table Of Contents 35 Connecting and Using a PC 85 Connection Using the HDMI Cable 37 Connection Using the DP Cable 37 Connection Using the MINI DP Cable 38 Connecting to Headphones 39 Connecting the Power 39 Tidying Up the Connected Cables 40 Connecting the Product to a PC as a USB HUB 40 Connecting a PC to the Product 40 Utilizing the Product as a USB HUB 42 Driver Installation 43 Setting Optimum Resolution SCREEN SETUP 44 SAMSUNG MAGIC Bright 44
6. 20 sec 200 sec 4 Press e e to move to the option you want and press a c 5 The selected option will be applied 6 1 Setup and Reset A detailed description of each function is provided Refer to your product for details FreeSync The functions available on the monitor may vary depending on the model Refer to the actual product S e e FreeSync is a DisplayPort 1 2 function so the choice of the DisplayPort Ver 1 1 in OSD or when the access of HDMI signal the FreeSync function is not available Make sure to use a Samsung DP cable DP cables not supplied by Samsung may not be compatible with the product e The sound quality of the monitor may decrease if FreeSync is enabled Not available when PIP PBP Mode is set to On 6 1 1 Configuring FreeSync 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e e to move to System and press t7 on the product 3 Press e e to move to FreeSync and press t37 c on the product The following screen will appear U28E850R FreeSync technology is solution that FreeSync eliminates screen tearing without all the Smart Eco Saving usual lag and latency FreeSync can be Off Timer Plus operated when you use AMD s graphic USB Super Charging card with supporting Freesync solution PC AV Mode DisplayPort Ver Source Detection e Off Disable
7. Connects to a PC using a DP cable l MINI DP IN Connects to a PC using a MINI DP cable D 1 Preparations 21 Preparations Port Description SSR 1 SSR 2 E32 h Connect to a USB device K High speed charging is possible using the ss 1 and ss lt 3 2 ports only These ports charge devices faster than typical USB ports The speed depends on the connected devices SS lt PC IN D Connects to a PC using a USB cable Compatible with a USB cable version 3 0 or lower K This port can only connect to a PC OD Connect to an audio output device such as headphones Preparations U28E850R r LV J fi h h I i HDMI IN1 HDMI IN2 DPIN MINI DP IN 2 SS amp PC IN See e Port Description POWER IN Connect the power cord for your monitor to the POWER IN port on A the back of the product Connect to a source device using an HDMI cable HDMI IN 1 HDMI IN 2 K HDMI 1 support 3840 x 2160 30 Hz HDMI 2 support 3840 x 2160 60 Hz Connects to a PC using a DP cable MINI DP IN D Connects to a PC using a MINI DP cable SSF 1 SSR BRE Connect to a USB device K High speed charging is possible using the ss lt 1 and ss lt 3 2 ports only These ports charge devices faster than typic
8. The following screen will appear Set the USB Super charging mode FreeSync Smart Eco Saving Off Timer Plus USB Super Charging PC AV Mode DisplayPort Ver Source Detection Set the USB Port1 Set the USB Port2 charging On Off charging On Off 2 2s eB CHH H A ee e Off Disable USB Super Charging e On Enable the function to quickly charge a source device connected to the USB 3 0 port 5 Press e to move to the option you want and press 39 01 6 The selected option will be applied 6 Setup and Reset 6 5 Setup and Reset PC AV Mode Set PC AV Mode to AV The picture size will be enlarged This option is useful when you view a movie K e Supplied for the wide models only such as 16 9 or 16 10 6 1 N e _ If the monitor when set to HDMI DisplayPort Mini DP U24E850R or HDMI 1 HDMI 2 DisplayPort Mini DP U28E850R U32E850R is in power saving mode or is displaying the message Check Signal Cable press the IT button to display the On Screen Display OSD You can select PC or AV 5 1 Configuring PC AV Mode Press any button on the front of the product to display the Function Key Guide Next press H to display the corresponding menu screen Press e e to move to System and press H C on the product Press e e to move to PC AV Mode and press C on the product Press e e to move to HDMI DisplayPort Mini DP U24E850R or HDMI 1
9. W x H x D 29 1 x 17 3 x 2 7 Inches Weight With Stand MAX 740 3 x 623 5 x 278 6 mm 9 61 kg 29 1 x 24 5 x 11 0 Inches 21 19 lbs MIN 740 3 x 493 5 x 278 6 mm 9 61 kg 29 1 x 19 4 x 11 0 Inches 21 19 lbs VESA Mounting Interface 100 x 100 mm 3 9 Inches x 3 9 Inches For use with Specialty Arm Mounting hardware Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing Plug and Play This monitor can be installed and used with any Plug and Play compatible systems Two way data exchange between the monitor and PC system optimizes the monitor settings Monitor installation takes place automatically However you can customize the installation settings if desired lt A Panel Dots Pixels Due to the nature of the manufacturing of this product approximately 1 pixel per million 10pm may be brighter or darker on the LCD panel This does not affect product performance WZ The above specifications are subject to change without notice to improve quality o K This device is a Class B digital apparatus 10 Specifications 105 v Specifications USA only Dispose unwanted electronics through an approved recycler To find the nearest recycling location go to our website www samsung com recyclingdirect or c
10. e to move to NWISAngle and press 39 03 on the product The following screen will appear Select an angle that best suits your viewin SAMSUNG y g MAGICBright Custom position Brightness Off Lean Back Mode 1 Contrast Sharpness Lean Back Mode 2 Color Standing Mode MKWIAngle Side Mode Screen Setup Select an angle that best suits your viewing SAMSUNG p ore MAGICBright Custom position Brightness a Group View Contrast Custom Sharpness Color SAMSUNG MAGICAngle Off D Select this option to view directly in front of the product Lean Back Mode 1 Select this option to view from a place slightly lower than the product Lean Back Mode 2 Select this option to view from a place lower than Lean Back Mode 1 Standing Mode Select this option to view from a place higher than the product Side Mode O Select this option to view from either side of the product Group View Select this option for more than one viewer to view from places D and O Custom Lean Back Mode 1 will be applied by default if Custom is selected Press e e to move to the option you want and press 0 3 The selected option will be applied 3 7 Screen Setup HDMI Black Level If a DVD player or set top box is connected to the product via HDMI image quality degradation contrast color degradation black level etc may occur depending on the connected source device In such ca
11. 59 810 83 500 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 VESA 1440 x 900 55 935 59 887 106 500 VESA 1600 x 900RB 60 000 60 000 108 000 VESA 1680 x 1050 65 290 59 954 146 250 VESA 1920 x 1080 67 500 60 000 148 500 VESA 2560 x 1440RB 88 787 59 951 241 500 VESA 3840 x 2160 67 500 30 000 297 000 10 Specifications 110 Specifications U28E850R U32E850R HDMI2 Displayport MINI DP Resolution Sis Rentra Maciek Sm tots kHz Hz IBM 720 x 400 31 469 70 087 28 322 VESA 640 x 480 31 469 59 940 25 175 MAC 640 x 480 35 000 66 667 30 240 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 MAC 882 x 624 49 726 74 551 57 284 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 MAC 1152 x 870 68 681 75 062 100 000 VESA 1280 x 720 45 000 60 000 74 250 VESA 1280 x 800 49 702 59 810 83 500 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 VESA 1440 x 900 55 935 59 887 106 500 VESA 1600 x 90
12. Configuring SAMSUNG MAGIC Bright 47 Brightness 47 Configuring Brightness 48 Contrast 48 Configuring Contrast 49 Sharpness 49 Configuring Sharpness 50 Color 50 Configuring Color 52 SAMSUNG MAGIC Angle U28E850R 52 Configuring SAMSUNG MAGIC Angle 54 HDMI Black Level 54 Configuring the HDMI Black Level Settings 55 Eye Saver Mode 55 Configuring Eye Saver Mode Table Of Contents CONFIGURING THE PIP PBP SETTINGS COORDINATING OSD SETUP AND RESET 56 56 57 of 58 58 60 60 77 TT 78 78 79 19 80 80 83 83 84 84 86 Game Mode Configuring Game Mode Response Time Configuring the Response Time Picture Size Changing the Picture Size Screen Adjustment Configuring H Position amp V Position PIP PBP Configuring PIP PBP Mode Configuring Size Configuring Position Configuring Sound Source Configuring Source Configuring Picture Size Configuring Contrast Transparency Changing Transparency Language Configuring Language Display Time Configuring Display Time FreeSync Configuring FreeSync Smart Eco Saving Configuring Smart Eco Saving Off Timer Plus Configuring Off Timer Configuring Eco Timer Table Of Contents INFORMATION MENU AND OTHERS INSTALLING THE SOFTWARE TROUBLESHOOTING GUIDE SPECIFICATIONS 88 88 89 89 91 91 92 92 93 93 94 94 95 95 96 97 97 98 99 99 99 99 102 104 107 108 USB
13. Setup and Reset 6 3 2 Configuring Eco Timer Eco Timer 1 O AUN Press any button on the front of the product to display the Function Key Guide Next press 0H to display the corresponding menu screen Press e e to move to System and press H C on the product Press e e to move to Off Timer Plus and press T C on the product Press e e to move to Eco Timer and press H C on the product Press e e to move to Eco Timer and press 3 3 on the product The following screen will appear Enable or disable the Eco Timer Off Timer Eco Timer Enable or disable the Eco Timer Eco Timer HH H ee e Off Deactivate the eco timer to disable the automatic power off feature The product will not power off while in power saving mode if this feature is deactivated e On Activate the eco timer so that the product powers off automatically when it has been in power saving mode for a specified period of time 6 Press e e to move to the option you want and press 39 21 7 The selected option will be applied 6 Setup and Reset 86 Setup and Reset Eco Off After 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen Press e e to move to System and press H C on the product Press e e to move to Off Timer Plus and press C on the product Press e e to move to Eco
14. Timer and press 3 3 on the product OM KR PO Press e e to move to Eco Off After and press C3 on the product The following screen will appear Enable or disable the Eco Timer E Eco Timer Eco Off After G Press e to configure Eco Off After 7 The selected option will be applied K e The Eco timer can be set between 10 and 180 minutes The product will automatically power off after the specified time has elapsed e _ This option is only available when Eco Timer is set to On 6 Setup and Reset 6 4 Setup and Reset USB Super Charging Charge the battery of a connected source device quickly using the USB 3 0 port on the product K e Setting USB Super Charging to On during a data transfer will stop the data transfer If you set USB Super Charging to Off the standard charging and data transfer feature will be available e High speed charging is possible using the ss 1 and ss 2 ports only These ports charge devices faster than typical USB ports The speed depends on the connected devices 6 4 1 Configuring USB Super Charging 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e to move to System and press t c on the product 3 Press e to move to USB Super Charging and press 3 2 on the product 4 Press e to move to USB1 or USB2 and press 3 2 on the product
15. depending on the ports provided with the product e Changing the screen size is available when the following conditions are satisfied o A digital output device is connected using the HDMI DP MINI DP cable o The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of these signals o This can only be set when the external input is connected through HDMI DP MINI DP and PC AV Mode is set to AV 4 Press to move to the option you want and press Q c 5 The selected option will be applied 4 Configuring the PIP PBP Settings Configuring the PIP PBP Settings 4 1 7 Configuring Contrast PIP Adjust the contrast level for sub screen 1 Press any button on the front of the product to display the Function Key Guide Next press M to display the corresponding menu screen 2 Press e to move to PIP PBP and press 3 0 on the product oO 3 Press e e to move to Contrast and press 3 2 available in PIP mode Size IS ESB The following screen will appear Adjust the contrast level for each screen PIP PBP Mode Size Position Sound Source Source Picture Size Contrast 4 Adjust the Contrast using the e e buttons 5 The selected option will be applied 4 Configuring the PIP PBP Settings Configuring the PIP PBP Settings PBP Adjust the contrast level for each screen 1 Press any button on the front of the produ
16. installing the purchased product for the first time e If a product is reinstalled to move to a different spot or to move to a different house e If customer requests instructions on how to use because of another company s product e If customer requests instructions on how to use the network or another company s program e If customer requests software installation and setup for the product e If a service technician removes cleans dusts or foreign materials inside of the product e If customer requests an installation additionally after purchasing a product through home shopping or online A Product damage caused by customer s fault Product damage caused by customer s mishandling or wrong repair If a product damage is caused by external impact or drop e use of supplies or separately sold product unspecified by Samsung e repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co Ltd e remodeling or repairing the product by customer e using it with incorrect voltage or non authorised electrical connections not following the cautions in User Manual Others e f product fails by natural disaster lightning fire earthquake flood damage etc e If consumable components are all used up Battery Toner Fluorescent lights Head Vibrator Lamp Filter Ribbon etc K If customer requests a service in case the product has no defect service
17. on the product 3 Press e to move to Picture Size and press 3 0 available in PIP mode Size IS IES L The following screen will appear In PC mode Select the image size for each screen PIP PBP Mode Size Position Sound Source Source Picture Size Contrast e Auto Display the picture according to the aspect ratio of the each screen input source e Wide Display the picture in full screen regardless of the aspect ratio of the each screen input source 4 Configuring the PIP PBP Settings Configuring the PIP PBP Settings In AV mode Select the image size for each screen PIP PBP Mode Size Position Sound Source 4 3 Source 16 9 Picture Size S Fit Contrast Seer e 4 3 Display the picture of the sub screen with an aspect ratio of 4 3 Suitable for videos and standard broadcasts e 16 9 Display the picture of the sub screen with an aspect ratio of 16 9 e Screen Fit Display the picture of the sub screen with the original aspect ratio without cutting anything off K e The function may not be supported depending on the ports provided with the product e Changing the screen size is available when the following conditions are satisfied o A digital output device is connected using the HDMI DP MINI DP cable o The input signal is 480p 576p 720p or 1080p and monitor can display normally Not every model can support all of these signals o This can only be set wh
18. s service center has run out of replacement parts and cannot repair the product Samsung will replace your product at no additional charge If the model you purchased is no longer available Samsung replace it with the current equivalent model Appendix Terminology OSD On Screen Display On screen display OSD allows you to customize on screen settings to optimize the picture quality as required You can change the screen brightness tint size and many other settings Using menus displayed on the screen Gamma The Gamma menu adjusts the grey scale that represents middle tones on the screen Adjusting the brightness brightens the whole screen but adjusting Gamma only brightens the medium brightness Grey scale Scale refers to levels of color intensity that show variations of color change from darker areas to brighter areas on the screen Changes to the screen brightness are expressed with black and white variation and grey scale refers to the medium area between black and white Changing the grey scale through Gamma adjustment will change the medium brightness on the screen Scanning rate Scanning rate or refresh rate refers to the frequency of screen refreshes Screen data is transmitted as it refreshes to display an image although the refreshing is invisible to the naked eye The number of screen refreshes is called scanning rate and is measured in Hz A scanning rate of 60Hz means that the screen refreshes 60
19. screen PIP PBP Mode Size DisplayPort HDMI Appl Sound Source PPY Source eS Cancel Picture Size Contrast 75 100 e DisplayPort e Mini DP e HDMI 4 Configuring the PIP PBP Settings 69 Configuring the PIP PBP Settings U28E850R U32E850R A If the function button description page appears press O C The main screen will switch in the order DisplayPort gt Mini DP gt HDMI 1 HDMI 2 Select the source for each screen PIP PBP Mode Size DisplayPort Sound Source Source Picture Size gt Contrast 75 100 e DisplayPort Mini DP HDMI1 HDMI 2 Press e e to move to the option you want and press 0 3 Press i c to move to Apply and press 7 3 on the product Pressing e e when Cancel Sg D t Apply Cancel is selected will clear the Source settings and display the PIP PBP control menu page e The input source for the main screen changes e The screen may flicker if the input signal is unstable e When the input signal of the left and right screens are the same the operation cannot be performed 4 Configuring the PIP PBP Settings Configuring the PIP PBP Settings 4 1 6 Configuring Picture Size Select the image size for sub screen PIP 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e to move to PIP PBP and press 3 0
20. 0 5 The selected option will be applied 6 Setup and Reset 93 Setup and Reset 6 9 Reset All Return all the settings for the product to the default factory settings 6 9 1 Initializing Settings Reset All 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e to move to System and press 0 0 on the product 3 Press e e to move to Reset All and press 3 3 on the product The following screen will appear Return all the settings for the product to the Key Repeat Time Acceleration default factory settings Reset All All the menu settings will be reset to default Are you sure you want to reset 4 Press to move to the option you want and press 3 8 5 The selected option will be applied 6 Setup and Reset 94 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen Press e e to move to Information The current input source frequency and resolution will appear The following screen will appear U24E850R U28E850R U32E850R m Information M Information Picture Picture PIP PBP Cs PIP PBP gt OnScreen Display gt OnScreen Display o System 01 System D Fonc mate D roma COR lt Nn gt E lt H H oO PBP Information Information F Picture
21. 0 017815 Inches H x 0 006299 Inches H x 0 005344 Inches V 0 006299 Inches V Power Supply AC 100 240 V 10 50 60 Hz 3 Hz Refer to the label at the back of the product as the standard voltage can vary in different countries Dimensions Without Stand 561 0 x 336 1 x 59 3 mm 661 1 x 384 5 x 60 7 mm W xH x D 22 1 x 13 2 x 2 3 Inches 26 0 x 15 1 x 2 4 Inches Weight With Stand MAX 561 0 x 527 2 x MAX 661 1 x 551 5 x 260 6 mm 7 43 kg 26 0 x 21 7 x 10 3 Inches 16 38 lbs MIN 661 1 x 421 5 x 260 6 mm 7 43 kg 26 0 x 16 6 x 10 3 Inches 16 38 lbs VESA Mounting Interface 100 x 100 mm 3 9 Inches x 3 9 Inches For use with Specialty Arm Mounting hardware Environmental considerations Operating Temperature 50 F 104 F 10 C 40 C Humidity 10 80 non condensing Storage Temperature 4 F 113 F 20 C 45 C Humidity 5 95 non condensing 10 Specifications 104 v Specifications Model Name U32E850R Panel Size 31 5 Inches 80 cm Display area 696 96 mm H x 392 04 mm V 27 4 Inches H x 15 4 Inches V Pixel Pitch 0 1815 mm H x 0 0605 mm V 0 007146 Inches H x 0 002382 Inches V Power Supply AC 100 240 V 10 50 60 Hz 3 Hz Refer to the label at the back of the product as the standard voltage can vary in different countries Dimensions Without Stand 740 3 x 439 8 x 67 7 mm
22. 0RB 60 000 60 000 108 000 VESA 1680 x 1050 65 290 59 954 146 250 VESA 1920 x 1080 67 500 60 000 148 500 VESA 2560 x 1440RB 88 787 59 951 241 500 VESA 3840 x 2160RB 133 313 59 997 533 250 e Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle The reciprocal number of a horizontal cycle is called horizontal frequency Horizontal frequency is measured in kHz 10 Specifications 111 v Specifications e Vertical Frequency Repeating the same picture dozens of times per second allows you to view natural pictures The repeat frequency is called vertical frequency or refresh rate and is indicated in Hz e Some resolutions listed in the table above may not be available depending on graphics card specifications Appendix Responsibility for the Pay Service Cost to Customers We When the service is requested in spite of in warranty we may charge you for a visit from a service technician in the following cases Not a product defect Cleaning of the product Adjustment Explanation Re installation and etc e If a service technician gives instructions on how to use product or simply adjusts options without disassembling product e Ifa defect is caused by external environmental factors Internet Antenna Wired Signal etc e If a product is reinstalled or devices are connected additionally after
23. 3 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 MAC 1152 x 870 68 681 75 062 100 000 VESA 1280 x 720 45 000 60 000 74 250 VESA 1280 x 800 49 702 59 810 83 500 VESA 1280 x 1024 63 981 60 020 108 000 VESA 1280 x 1024 79 976 75 025 135 000 VESA 1440 x 900 55 935 59 887 106 500 VESA 1600 x 900RB 60 000 60 000 108 000 VESA 1680 x 1050 65 290 59 954 146 250 VESA 1920 x 1080 67 500 60 000 148 500 VESA 2560 x 1440RB 88 787 59 951 241 500 VESA 3840 x 2160RB 133 313 59 997 533 250 10 Specifications 109 U28E850R U32E850R HDMI1 v Specifications Resolution Sere Regue Maciek Sm toy kHz Hz IBM 720 x 400 31 469 70 087 28 322 VESA 640 x 480 31 469 59 940 25 175 MAC 640 x 480 35 000 66 667 30 240 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 MAC 882 x 624 49 726 74 551 57 284 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 023 75 029 78 750 VESA 1152 x 864 67 500 75 000 108 000 MAC 1152 x 870 68 681 75 062 100 000 VESA 1280 x 720 45 000 60 000 74 250 VESA 1280 x 800 49 702
24. 5 Color White does not really look white Change the Color settings Refer to 3 5 Color There is no image on the screen and the power LED blinks every 0 5 to 1 second The product is operating in power saving mode Press any key on the keyboard or move the mouse to return to normal operating mode 9 Troubleshooting Guide 100 Troubleshooting Guide Sound issue Issues There is no sound Solutions Check the connection of the audio device or adjust the volume Check the volume The volume is too low Adjust the volume If the volume is still low after turning it up to the maximum level adjust the volume on your PC sound card or software program Source device issue Issues Solutions A beeping sound is heard when my PC is booting If a beeping sound is heard when your PC is booting have your PC serviced A The LED lights on the frame of the product may be seen depending on the user s viewing angle The light is harmless to people and has no bearing on product features and performance The product is safe to use 9 Troubleshooting Guide 101 9 2 Troubleshooting Guide Q amp A Question How can change the frequency Answer Set the frequency on your graphics card Windows XP Go to Control Panel Appearance and Themes gt Display Settings gt Advanced Monitor and adjust Refresh rate
25. 8E850R Game Mode Off Eye Saver Mode Off Response Time Faster Game Mode Off Picture Size Screen Fit Response Time Faster Screen Adjustment gt Picture Size Screen Fit Screen Adjustment gt Move the image displayed on the H Position 3 screen to the left or right V Position Move the image displayed on the H Position a 3 screen up or down V Position 3 5 Press e e to configure H Position or V Position G The selected option will be applied Configuring the PIP PBP Settings 4 1 PIP PBP The PIP Picture in Picture function separates the screen into two parts One source device is displayed on the main screen at the same time the another source device is displayed in inset windows The PBP Picture by Picture function separates the screen in half displaying output from two different source devices simultaneously on the left and right sides of the screen A e Compatible with Windows7 and Windows8 The PIP PBP function may not be available depending on the specifications of the graphics card used If the screen is blank in PIP PBP mode when the optimum resolution is selected go to Control Panel Display Screen Resolution and click Detect on the PC Instructions are based on Windows 7 If the screen is blank when the resolution is set to the optimum resolution change the resolution to 1280 x 1024 e The screen may flicker briefly or appear after a delay when you enable or disabl
26. Control Panel and then double click Add or Remove Programs Select Easy Setting Box from the program list and click the Add Delete button 9 1 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center 9 1 1 Testing the Product WZ Before calling Samsung Customer Service Center test your product as follows If the problem persists contact Samsung Customer Service Center Check if your product is operating normally by using the product test function If the screen is turned off and the power indicator blinks even though the product is properly connected to a PC perform a self diagnosis test 1 Power off both the PC and product 2 Disconnect the cables from the product 3 Power on the product 4 If the message Check Signal Cable appears the product is working normally We If the screen remains blank check the PC system video controller and cable 9 1 2 Checking the Resolution and Frequency For a mode that exceeds the supported resolution refer to 10 3 Standard Signal Mode Table the message Not Optimum Mode will appear for a short time 9 1 3 Check the following Installation issue PC mode Issues Solutions The screen keeps switching on and off Check the cable connection between the product and PC and ensure the connectors are locked Refer to 2 2 Connecting and Using a PC Troubleshooting Guide Screen issue Issues The power LED is off The scr
27. F Picture PIP PBP PIP PBP gt OnScreen Display H i gt OnScreen Display H z H lo Sian HDMI DisplayPort tO Syan HDMI 1 HDMI 2 x x Ea H A gt C HA gt PIP Information Information Picture F Picture PIP PBP PIP PBP amp OnScreen Display gt OnScreen Display a System DEPARO oO System TX EB a A O Ea HA O 7 Information Menu and Others CHE 7 2 Information Menu and Others Configuring Brightness Contrast and Volume from the Initial Screen Adjust the Brightness Contrast Volume using the buttons when the initial screen that displays no menu screen is displayed IZ Brightness E e This menu is not available when MA g eBright is set to Dynamic Contrast mode e This menu is not available when Smart Eco Saving is enabled e This menu is not available when Eye Saver Mode is enabled WN Contrast SAMSUNG e This option is not available when ja G eBright is in Cinema or Dynamic Contrast mode e This menu is not available when Game Mode is enabled e This menu is not available when PIP PBP Mode is set to On and the Size is set to PBP Mode 1 Press any button on the front of the product when no menu screen is displayed to display the Function Key Guide Next press The following screen will appear Brightness 4 100 Es E ev 2 Press the 3 0 button to alternate between the Brightness Contrast and Volume settings 3 Adju
28. FreeSync e On Enable the basic FreeSync functions of the AMD graphics card 6 Setup and Reset Fy 4 5 Setup and Reset U24E850R U32E850R FreeSync technology is solution that FreeSync Off eliminates screen tearing without all the Smart Eco Saving Standard Engine usual lag and latency FreeSync can be Off Timer Plus j i operated when you Ultimate Engine use AMD s graphic USB Super Charging card with supporting Freesync solution PC AV Mode DisplayPort Ver Source Detection e Off Disable FreeSync e Standard Engine Enable the basic FreeSync functions of the AMD graphics card e Ultimate Engine Enable the FreeSync feature with a higher screen frame rate Screen tearing abnormal sync between the screen and content is reduced in this mode Note that screen flickering may occur during game play A If the FreeSync function is enabled the screen may flicker when you play games Press e e to move to the option you want and press 3 3 The selected option will be applied FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency FreeSync can be operated when you use AMD s graphic card with supporting FreeSync solution FreeSync is only supported by AMD graphics cards Select FreeSync Off if you are using a graphics card from a different manufacturer Please refer to the AMD s official website related situation Only a few of the following types of AMD g
29. HDMI Contrast e DisplayPort e Mini DP e HDMI 4 Configuring the PIP PBP Settings Configuring the PIP PBP Settings U28E850R U32E850R A If the function button description page appears press T T The main screen will switch in the order DisplayPort Mini DP gt HDMI 1 HDMI 2 Select the source for each screen PIP PBP Mode n Size Ea Position EF Sound Source Source DisplayPort Picture Size HDMI 1 Contrast HDMI 2 HH H AHM DisplayPort e Mini DP e HDMI1 HDMI 2 4 Press e to move to the option you want and press 3 0 5 The selected option will be applied I gt The input source for the main screen changes E e With the exception of the current input source the other two input sources can be selected e The screen may flicker if the input signal is unstable 4 Configuring the PIP PBP Settings 68 Configuring the PIP PBP Settings PBP 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e to move to PIP PBP and press 3 0 on the product 3 Press to move to Source and press t c available in PBP mode Size 0 The following screen will appear U24E850R We If the function button description page appears press O C The main screen will switch in the order DisplayPort Mini DP gt HDMI Select the source for Source each
30. HDMI 2 DisplayPort Mini DP U28E850R U32E850R and press 3 3 on the product The following screen will appear Set to AV to enlarge the picture FreeSync Smart Eco Saving Off Timer Plus USB Super Charging PC AV Mode DisplayPort Ver Source Detection U24E850R Select the PC AV mode for the DisplayPort DisplayPort source Select the PC AV mode for the MiniDP source DisplayPort MiniDP HDMI MiniDP HDMI CHH H m CH H H lt Select the PC AV mode for the HDMI source DisplayPort PC MiniDP HDMI a H A 6 Setup and Reset 89 Setup and Reset DisplayPort MiniDP HDMI 1 HDMI 2 CH H A m DisplayPort MiniDP HDMI 1 HDMI 2 U28E850R U32E850R Select the PC AV mode for the DisplayPort source DisplayPort MiniDP HDMI 1 HDMI 2 Select the PC AV mode for the HDMI1 source MiniDP HDMI 1 HDMI 2 CJH H A m 5 Press e e to move to the option you want and press 3 1 6 The selected option will be applied DisplayPort Select the PC AV mode for the MiniDP source lt H lt Select the PC AV mode for the HDMI2 source PC PC CH H H 6 Setup and Reset 90 6 6 Setup and Reset DisplayPort Ver Select your Displayport Displayport 1 1 supports High Bit Rate 1 while 1 2 supports High Bit Rate 2 IZ Incorrect settings may cause the screen to go blank If this occurs chec
31. MI Picture Size Sub Contrast DisplayPort Contrast PBP U24E850R U28E850R U32E850R Set which screen you Set which screen you want to hear the want to hear the PIP PBP Mode On sound for PIP PBP Mode sound for Size Lo Size Sound Source Sound Source Source Source n E Left X Left Picture Size HDMI Picture Size HDMI 2 Contrast 7500 R port Contrast 75 100 Right On 4 Press e to move to the option you want and press 9 J 5 The selected option will be applied 4 Configuring the PIP PBP Settings 66 Configuring the PIP PBP Settings 4 1 5 Configuring Source Select the source for each screen Due to DisplayPort and Mini DP can t be identified at the same time if DisplayPort and Mini DP as the source at the same time the Apply is not available PIP 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e to move to PIP PBP and press 3 0 on the product 3 Press e e to move to Source and press 3 0 available in PIP mode Size S S BH The following screen will appear U24E850R We If the function button description page appears press T T The main screen will switch in the order DisplayPort Mini DP gt HDMI Select the source for each screen PIP PBP Mode n Size EZ Es Position Sound Source Source DisplayPort Picture Size
32. Super Charging Configuring USB Super Charging PC AV Mode Configuring PC AV Mode DisplayPort Ver Configuring DisplayPort Ver Source Detection Configuring Source Detection Key Repeat Time Configuring Key Repeat Time Reset All Initializing Settings Reset All Information Displaying Information Configuring Brightness Contrast and Volume from the Initial Screen Easy Setting Box Installing the Software Removing the Software Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution and Frequency Check the following Q amp A General PowerSaver Standard Signal Mode Table Table Of Contents APPENDIX INDEX 113 113 113 1g 114 114 114 115 Responsibility for the Pay Service Cost to Customers Not a product defect A Product damage caused by customer s fault Others Correct Disposal Correct Disposal of This Product Waste Electrical amp Electronic Equipment Extended warranty Terminology Before Using the Product Copyright The contents of this manual are subject to change without notice to improve quality 2015 Samsung Electronics Samsung Electronics owns the copyright for this manual Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited Microsoft and Windows are registered trademarks of Microsoft Corporation VESA DPM and DDC are registe
33. able that supports 3840 x 2160 60 Hz to connect HDMI Make sure that the graphics card of the HDMI source supports 3840 x 2160 60 Hz e When connecting an HDMI cable use the cable that came with the components of the monitor If you use an HDMI cable other than provided by Samsung the image quality may be degraded U28E850R U32E850R HDMI IN 1 HDMI IN 2 1 Connect the HDMI IN 1 or HDMI IN 2 port on the back of the product to the HDMI port on the PC using an HDMI cable 2 Press 3 0 to change the input source to HDMI 1 or HDMI 2 K e Provided ports may vary depending on the product e To display 3840 x 2160 30 Hz use an HDMI cable that supports 3840 x 2160 30 Hz to connect HDMI 1 Make sure that the graphics card of the HDMI source supports 3840 x 2160 30 Hz e To display 3840 x 2160 60 Hz use an HDMI cable that supports 3840 x 2160 60 Hz to connect HDMI 2 Make sure that the graphics card of the HDMI source supports 3840 x 2160 60 Hz e When connecting an HDMI cable use the cable that came with the components of the monitor If you use an HDMI cable other than provided by Samsung the image quality may be degraded Connecting and Using a Source Device 2 2 2 Connection Using the DP Cable H Do not connect the power cable before connecting all other cables L Ensure you connect a source device first before connecting the power cable 1 Connect one end of the DP cable to the DP IN por
34. able to automatically switch to the optimum resolution due to a compatibility issue between the graphics card and the Windows system Set PIP PBP Mode to Off Alternatively restart the monitor then set the resolution to the optimum setting using the Windows interface Configuring the PIP PBP Settings 4 1 1 Configuring PIP PBP Mode Enable or disable the PIP PBP function 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e to move to PIP PBP and press 2 C on the product 3 Press e to move to PIP PBP Mode and press t c on the product The following screen will appear Turn PIP PBP Mode on or off PIP PBP Mode HH n m e Off On 4 Press e e to move to the option you want and press 3 0 5 The selected option will be applied 4 Configuring the PIP PBP Settings 63 Configuring the PIP PBP Settings 4 1 2 Configuring Size Select the size and aspect ratio of the sub screen 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e e to move to PIP PBP and press 3 0 on the product 3 Press e to move to Size and press t c on the product The following screen will appear U24E850R U28E850R U32E850R Select the size and Select the size and aspect ratio of the aspect ratio of
35. al USB ports The speed depends on the connected devices 1 Preparations 23 Preparations y ort Description SS amp PC IN Connects to a PC using a USB cable Compatible with a USB cable version 3 0 or lower MW This port can only connect to a PC OD mM Connect to an audio output device such as headphones Preparations U32E850R HDMI IN1 HDMI IN2 DP IN MINI DP IN Description Port POWER IN Connect the power cord for your monitor to the POWER IN port on A the back of the product Connect to a source device using an HDMI cable HDMI IN 1 HDMI IN 2 K HDMI 1 support 3840 x 2160 30 Hz HDMI 2 support 3840 x 2160 60 Hz DP IN om Connects to a PC using a DP cable MINI DP IN Connects to a PC using a MINI DP cable SS lt 4 1 SSF 2 kit Connect to a USB device K High speed charging is possible using the ss lt 1 and ss lt 3 2 ports only These ports charge devices faster than typical USB ports The speed depends on the connected devices 1 Preparations 25 Preparations y ort Description SS amp PC IN Connects to a PC using a USB cable Compatible with a USB cable version 3 0 or lower I This port can only connect to a PC gt m Connect to an audio output device such a
36. aliano Polski Portugu s Pycckui Espa ol Svenska T rk e HAE iXiZ 6201 5 Ifthe orientation is set to a mode other than Landscape in the screen resolution menu on Windows 7 the MagicRotation Auto function may not work properly 6 The OSD menu will be displayed if the monitor is rotated When the monitor is rotated the screen reconfiguration process may be displayed or screen burn in may appear depending on the graphics card This is performed by the Windows operating system and has nothing to do with the product 7 Ifyou do not want the screen to rotate automatically when the monitor is rotated press the Windows and L keys at the same time to lock the Windows operating system If the operating system cannot be locked it is due to the constraints of Windows API and has nothing to do with the product 1 Preparations Er Preparations 1 5 Rotating the monitor When rotating the monitor the rotation angle is displayed on the monitor screen The on screen display OSD menu items will automatically rotate when the screen rotates i ic 2 IC ory Caution 1 Ifthe MagicRotation Auto software is not installed on the monitor contents on the screen cannot be rotated The OSD can still rotate by 90 and display properly 2 Once rotated the OSD may appear in a different view mode from the mode before it was rotated 2 1 2 2 Connecti
37. all 877 278 0799 v Specifications 10 2 PowerSaver The power saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time The power is not turned off in power saving mode To switch the screen back on press any key on the keyboard or move the mouse Power saving mode functions only when the product is connected to a PC that has a power saving function U24E850R Energy Star Power off eves Test Condition Bonet sevingiued Power button Power Indicator On Blinking Off Power Consumption Typical 28 6 W Typical 0 3 W Less than 0 3 W U28E850R Energy Star Power off Rowersaver Test Condition Power savingmode Power button Power Indicator On Blinking Off Power Consumption Typical 27 1 W Typical 0 3 W Less than 0 3 W U32E850R Energy Star Power off Fowersaver Test Condition Power saving mode Power button Power Indicator On Blinking Off Power Consumption Typical 42 1 W Typical 0 3 W Less than 0 3 W The displayed power consumption level can vary in different operating conditions or when settings are changed e ENERGY STAR is a US registered mark of the United States Environmental Protection Agency Energy Star power is measured with the test method in the current Energy Star Standard To reduce the power consumptio
38. arpness 60 Color gt Eye Saver Mode U28E850R Adjust the brightness level Values closer to MA GIE Bright Custom 100 mean a brighter screen Brightness 100 Contrast 75 Sharpness 60 Color gt MAGIEAngle Of 4 Adjust the Brightness using the e e buttons 5 The selected option will be applied 3 Screen Setup 3 3 Screen Setup Contrast Adjust the contrast between the objects and background Range 0 100 A higher value will increase the contrast to make the object appear clearer WZ This option is not available when e This menu is not available when Game Mode is enabled e This menu is not available when PIP PBP Mode is set to On and the Size is set to LL PBP Mode 3 3 1 Configuring Contrast is in Cinema or Dynamic Contrast mode 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e e to move to Picture and press 3 2 on the product 3 Press e e to move to Contrast and press H m on the product The following screen will appear U24E850R U32E850R SAMSUNG MAGICBright Custom Brightness 100 Contrast TS Sharpness 60 Color gt Eye Saver Mode U28E850R MAGICBright Custom Brightness 100 Contrast 75 Sharpness 60 Color gt MAGICAngle of 4 Adjust the Contrast using the e buttons 5 The selected o
39. be cooler than Cool 1 o Cool 1 Set the color temperature to be cooler than Normal mode o Normal Display the standard color tone o Warm 1 Set the color temperature to be warmer than Normal mode o Warm 2 Set the color temperature to be warmer than Warm 1 o Custom Customize the color tone 4 When the external input is connected through HDMI DP MINI DP and PC AV Mode is set to AV Color Tone has four color temperature settings Cool Normal Warm and Custom e Gamma Adjust the middle level of luminance o Mode1 o Mode2 o Mode3 4 Press e to move to the option you want and press 3 2 5 The selected option will be applied 3 6 Screen Setup SAMSUNG MAGIC Angle U28E850R MAGicAngle allows you to configure the settings to obtain the optimum picture quality according to your viewing angle K e This option is not available when iA Gi cBright is in Cinema or Dynamic Contrast mode e This menu is not available when Game Mode is enabled e This menu is not available when Eye Saver Mode is enabled Not available when PIP PBP Mode is set to On This feature provides the viewing angle brightness and tint to suit your preferences 3 6 1 Configuring SAMSUNG MAGIC Angle 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e e to move to Picture and press 3 2 on the product 3 Press
40. ble for eye relaxation 4 Press e e to move to the option you want and press a c 5 The selected option will be applied Screen Setup 3 9 Game Mode Configure the product screen settings for game mode Use this feature when playing games on a PC or when a game console such as PlayStation or Xbox is connected A e This menu is not available when Eye Saver Mode is enabled e This Menu is not available when Smart Eco Saving is enabled Not available when PIP PBP Mode is set to On 3 9 1 Configuring Game Mode 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e to move to Picture and press H C on the product 3 Press e to move to Game Mode and press t c on the product The following screen will appear U24E850R U32E850R Optimizes image settings for playing Game Mode games Response Time Picture Size Always On HH H AH U28E850R Optimizes image settings for playing Eye Saver Mode games Game Mode Off Response Time On Picture Size Always On 4 Press e to move to the option you want and press 39 01 5 The selected option will be applied WZ e Game Mode turns Off when the monitor turns on power saving mode activates or the input source changes e If you want to keep Game Mode enabled all the time select Always On 3 Screen Set
41. ces should be purchased separately Connecting and Using a Source Device 2 4 Driver Installation K e You can set the optimum resolution and frequency for this product by installing the corresponding drivers e An installation driver is contained on the CD supplied with the product Ifthe file provided is faulty visit the Samsung homepage http www samsung com and download the file 1 Insert the user manual CD provided with the product into the CD ROM drive 2 Click Windows Driver 3 Follow the instructions given on the screen to proceed with installation 4 Select your product model from the list of models Select the display adapter on which you wert to intall te monitor 1 RADEON 9550 Plug ond PiayMontor ra Select the monitor which you wan to install 5 Go to Display Properties and check that the resolution and refresh rate are appropriate Refer to your Windows OS manual for further details Connecting and Using a Source Device 2 5 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase Select a language on the product and change the resolution on your PC to the optimum setting Setup Guide Language English The optimal resolution for this monitor is as follows KKKK KKKK kk x Hz Use the above settings to set the resolution on your PC Current Resolution x Close
42. ct to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e to move to PIP PBP and press 3 0 on the product qu 3 Press e e to move to Contrast and press H available in PBP mode Size 1 The following screen will appear Adjust the contrast level for each screen PIP PBP Mode Size Sound Source Source Picture Size gt Contrast 75 100 uH Contrast E ee gt 75 4 Adjust the Contrast using the e e buttons 5 The selected option will be applied 4 Configuring the PIP PBP Settings Coordinating OSD A detailed description of each function is provided Refer to your product for details 5 1 Transparency Set the transparency for the menu windows 5 1 1 Changing Transparency 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e to move to OnScreen Display and press 3 2 on the product 3 Press e to move to Transparency and press 7 2 on the product The following screen will appear Configure the transparency of the Transparency menu windows Language Display Time 4 Press e to move to the language you want and press 0 0 5 The selected option will be applied 5 Coordinating OSD TT 5 2 Coordinating OSD Language Set the menu language K e A change to the language se
43. d and contact Samsung Customer Service Center e Product failure an electric shock or fire may result Do not place objects containing liquid vases pots bottles etc or metallic objects on top of the product e If water or any foreign substance enters the product be sure to power off the product remove the power cord and contact Samsung Customer Service Center e Product failure an electric shock or fire may result Before Using the Product 15 Before Using the Product A Caution Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn in or defective pixels e f you are not going to use the product for an extended period of time activate power saving mode or a moving picture screen saver Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time vacation etc e Otherwise a fire may result from accumulated dust overheating an electric shock or electric leakage Use the product at the recommended resolution and frequency e Your eyesight may deteriorate Looking at the screen too close for an extended period of time can deteriorate your eyesight Do not hold the monitor upside down or move it by holding the stand e The product may fall and break or cause a personal injur
44. e end of the cable through the loop on the other end 3 Insert the locking device into the anti theft lock slot at the back of the product 4 Lock the locking device A e An anti theft locking device can be purchased separately e Refer to the user guide provided with your anti theft locking device for details e _ Anti theft locking devices can be purchased at electronics retailers or online 1 4 Preparations MagicRotation Auto The MagicRotation Auto function detects the rotation of monitors that are fitted with a rotation sensor and rotates the Windows screen accordingly Software Installation 1 Insert the user manual CD provided with the product into the CD ROM drive 2 Follow the instructions given on the screen to proceed with installation K After installation the application menu language will be displayed in the language of the operating system This complies with the basic policies of Windows Caution 1 Compatible only with Windows 7 32 bit or 64 bit and Windows 8 32 bit or 64 bit 2 Compatible with a graphics card that complies with the DDC CI and MS API standards With a graphics card that does not comply with the aforementioned standards the MagicRotation Auto function may not be available 3 To maximize the performance of the function update the graphics card driver to the latest version 4 Fourteen languages are available as installation languages English Fran ais Deutsch Magyar It
45. e the PIP PBP function or when you change the screen size with the PIP PBP function activated This can typically arise when a PC and a monitor are connected to two or more input sources It has nothing to do with the performance of a monitor The issue is mainly caused when the video signals are delayed in transmission to the monitor depending on the graphics card performance zoo r x m TS m All Contres Panel Rems Display b Screen Resolution r f Scorch Control Panel A Change the appearance of your displays Multiple aitame Show Gesktop osiyoni v This is Currently your man Cantey Agvanced settings Connect to a projector or press the QY key and tap P Make test aed ote tems larges o amates What Cala sethngs showed noose e U24E850R To maximize the picture quality and sound can be normal output it is recommended to use a graphics card or DVD that supports 4K 8840 x 2160 60 Hz resolution when connect HDMI port e U28E850R U32E850R To maximize the picture quality and sound can be normal output it is recommended to use a graphics card or DVD that supports 4K 8840 x 2160 30 Hz resolution when connect HDMI 1 port To maximize the picture quality and sound can be normal output it is recommended to use a graphics card or DVD that supports 4K 8840 x 2160 60 Hz resolution when connect HDMI 2 port Configuring the PIP PBP Settings e When the PIP PBP function is enabled the resolution will not be
46. een will not switch on Solutions Check that the power cable is connected properly Refer to 2 2 Connecting and Using a PC The message Check Signal Cable appears Check that the cable is properly connected to the product Refer to 2 2 Connecting and Using a PC Check that the device connected to the product is powered on Not Optimum Mode is displayed This message appears when the signal from the graphics card exceeds the maximum resolution or frequency for the product Change the maximum resolution and frequency to suit the product performance referring to Standard Signal Mode Table page 108 The images on the screen look distorted Check the cable connection to the product Refer to 2 2 Connecting and Using a PC The screen appears unstable and shaky There are shadows or ghost images left on the screen Check that the resolution and frequency for the PC are within the range of resolution and frequency compatible with the product Next if required change the settings referring to Standard Signal Mode Table page 108 in this manual and the Information menu on the product The screen is too bright The screen is too dark Adjust Brightness page 47 and Contrast page 48 Screen color is inconsistent Change the Color settings Refer to 3 5 Color The colors on the screen have a shadow and are distorted Change the Color settings Refer to 3
47. eep your knees bent at 90 degrees or more your heels attached to the floor and your arms lower than your heart Before Using the Product 1 1 Preparations Checking the Contents 1 1 1 Checking the Components K e Contact the dealer from whom you purchased the product if any item is missing e The appearance of the components may differ from the images shown Components Quick Setup Guide Warranty card Regulatory guide Not available in some locations optional User manual optional Power cable A T DP cable optional MINI DP cable optional USB 3 0 cable optional A e Components may vary depending on the country e Recommend to use the HDMI cable and DP cable which is provided by the supplier The optimal resolution may not be available when using a non high speed HDMI or HDMI DVI cable To ensure that the screen displays properly and sound can be normal output using a standard DP MINI DP or HDMI cable is recommended The DP MINI DP and HDMI cables must support a resolution of 3840 x 2160 at 60 Hz U24E850R To ensure that the screen displays properly and sound can be normal output using a DP or MINI DP cable that supports 3840 x 2160 60 Hz is recommended An HDMI cable that supports 3840 x 2160 30 Hz will work when connect with HDMI 1 An HDMI cable that supports 3840 x 2160 60 Hz will work when connect with HDMI 2 U28E850R U32E850R 1 Preparations 18 Prepara
48. emical substances extreme temperatures or a significant presence of moisture or a place where the product will operate continuously for an extended period of time may seriously affect its performance e Be sure to consult Samsung Customer Service Center before installation if you want to install the product at such a place Operation A Warning High voltage runs through the product Do not attempt to disassemble repair or modify the product on your own e An electric shock or fire may result e Contact Samsung Customer Service Center for repair To move the product first disconnect all the cables from it including the power cable e Otherwise the power cord may be damaged and a fire or electric shock may result If the product generates a strange noise a burning smell or smoke remove the power cord immediately and contact Samsung Customer Service Center e An electric shock or fire may result Do not let children hang from the product or climb on top of it e The product may fall and your child may become injured or seriously harmed If the product falls or the exterior is damaged power off the product remove the power cord and contact Samsung Customer Service Center e Otherwise an electric shock or fire may result Do not put a heavy object toy or sweets on top of the product e The product or heavy objects may fall as children try to reach
49. en the external input is connected through HDMI DP MINI DP and PC AV Mode is set to AV 4 Press e to move to the option you want and press a c 5 The selected option will be applied 4 Configuring the PIP PBP Settings Configuring the PIP PBP Settings PBP 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e to move to PIP PBP and press 3 0 on the product 3 Press e to move to Picture Size and press 3 c available in PBP mode Size m The following screen will appear Select the image size for each screen PIP PBP Mode Size Sound Source Source Picture Size gt Contrast 75 100 KI 5652 FY L In PC mode Picture Size e Auto Display the picture according to the aspect ratio of the each screen input source e Wide Display the picture in full screen regardless of the aspect ratio of the each screen input source 4 Configuring the PIP PBP Settings Configuring the PIP PBP Settings In AV mode Picture Size Apply Cancel e 4 3 Display the picture of the sub screen with an aspect ratio of 4 3 Suitable for videos and standard broadcasts e 16 9 Display the picture of the sub screen with an aspect ratio of 16 9 e Screen Fit Display the picture of the sub screen with the original aspect ratio without cutting anything off A e The function may not be supported
50. fee may be charged So please read User Manual first Appendix Correct Disposal Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal Extended warranty You can buy an extended warranty within 90 days of purchasing the product The extended warranty will cover an additional period of 3 years beyond the standard 3 year warranty Samsung guarantee that replacement parts will be available for 5 years after the end of production After 5 years in the event that the Samsung
51. for the toy or sweets resulting in a serious injury Before Using the Product 114 Before Using the Product During a lightning or thunderstorm power off the product and remove the power cable e An electric shock or fire may result Do not drop objects on the product or apply impact e An electric shock or fire may result Do not move the product by pulling the power cord or any cable e Otherwise the power cable may be damaged and product failure an electric shock or fire may result If a gas leakage is found do not touch the product or power plug Also ventilate the area immediately e Sparks can cause an explosion or fire Do not lift or move the product by the power cord or any cable e Otherwise the power cable may be damaged and product failure an electric shock or fire may result Do not use or keep combustible spray or an inflammable substance near the product e An explosion or fire may result Ensure the vents are not blocked by tablecloths or curtains e Otherwise a fire may result from an increased internal temperature Do not insert a metallic object a chopstick coin hair pin etc or inflammable object paper match etc into the vent or ports of the product e f water or any foreign substance enters the product be sure to power off the product remove the power cor
52. ically e On Activate the off timer so that the product powers off automatically 6 Setup and Reset 84 Setup and Reset 6 Press e e to move to the option you want and press 3 1 7 The selected option will be applied Turn Off After 1 Press any button on the front of the product to display the Function Key Guide Next press II to display the corresponding menu screen Press e e to move to System and press 37 on the product Press e e to move to Off Timer Plus and press C on the product Press e e to move to Off Timer and press 7 3 on the product OM KR Ww N Press e e to move to Turn Off After and press 4 C amp on the product The following screen will appear Set the monitor to automatically turn off Off Timer after a certain time period Turn Off After 6 Press e e to configure Turn Off After 7 The selected option will be applied 4 lt The off timer can be set within a range of 1 to 23 hours The product will automatically power off a after the specified number of hours This option is only available when Off Timer is set to On e For products for the market in some regions the Off Timer is set to automatically activate 4 hours after the product powers on This is done in accordance with power supply regulations If you do not want the timer to activate go to MENU gt System and set Off Timer Plus to Off 6 Setup and Reset 85
53. inema or Dynamic Contrast mode e This menu is not available when Game Mode is enabled e This menu is not available when Eye Saver Mode is enabled e The Color Tone and Gamma menu is not available when A Angle is enabled e Not available when PIP PBP Mode is set to On 3 5 1 Configuring Color 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e to move to Picture and press H C on the product 3 Press e to move to Color and press t c on the product The following screen will appear U24E850R U32E850R U28E850R Configure color Configure color settings settings SAMSUNG SAMSUNG MAGICBright MAGICBright Brightness Brightness Contrast Contrast Sharpness Sharpness Color Color RAGT EAnole Eye Saver Mode Adjust the red saturation level Values closer to 100 mean greater Green intensity for the color Blue Color Tone Gamma e Red Adjust the red saturation level Values closer to 100 mean greater intensity for the color e Green Adjust the green saturation level Values closer to 100 mean greater intensity for the color e Blue Adjust the blue saturation level Values closer to 100 mean greater intensity for the color e Color Tone Select a color tone that best suits your viewing needs 3 Screen Setup 50 Screen Setup o Cool 2 Set the color temperature to
54. ing menu screen Press e e to move to System and press 7 3 on the product Press e e to move to Source Detection and press i7 Cz on the product The following screen will appear Decide how input sources will be FreeSync Off detected Smart Eco Saving ii Off Timer Plus gt USB Super Charging gt PC AV Mode DisplayPort Ver PHE z Manual Source Detection Auto The input source is automatically recognized e Manual Manually select an input source Press e e to move to the option you want and press 0 3 The selected option will be applied 6 Setup and Reset 92 Setup and Reset 6 8 Key Repeat Time Control the response rate of a button when the button is pressed 6 8 1 Configuring Key Repeat Time 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e to move to System and press t37 on the product 3 Press e to move to Key Repeat Time and press 7 on the product The following screen will appear Configure the F response rate of a Key Repeat Time Acceleration button when the button is pressed Reset All 1 sec 286C No Repeat lt HH HU A H e Acceleration 1 sec or 2 sec can be selected If No Repeat is selected a command responds only once when a button is pressed 4 Press to move to the option you want and press 3
55. ion and adjust the resolution How do set power saving Windows XP Set power saving mode in Control Panel gt Appearance and Themes gt Display gt Screen Saver Settings or BIOS SETUP on the PC Windows ME 2000 Set power saving mode in Control Panel Display Screen Saver Settings or BIOS SETUP on the PC Windows Vista Set power saving mode in Control Panel gt Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Windows 7 Set power saving mode in Control Panel gt Appearance and Personalization Personalize gt Screen Saver Settings or BIOS SETUP on the PC Windows 8 Set power saving mode in Settings gt Control Panel Appearance and Personalization Personalize Screen Saver Settings or BIOS SETUP on the PC Refer to the user manual for your PC or graphics card for further instructions on adjustment 9 Troubleshooting Guide 103 v Specifications 10 1 General Model Name U24E850R U28E850R 260 6 mm 6 69 kg 22 1 x 20 8 x 10 3 Inches 14 75 lbs MIN 561 0 x 397 2 x 260 6 mm 6 69 kg 22 1 x 15 6 x 10 3 Inches 14 75 lbs Panel Size 23 5 Inches 59 cm 28 Inches 70 cm Display area 521 28 mm H x 293 22 mm V 620 93 mm H x 341 28 mm V 20 5 Inches H x 11 5 Inches V 24 4 Inches H x 13 4 Inches V Pixel Pitch 0 4525 mm H x 0 16 mm H x 0 13575 mm V 0 16 mm V
56. k the device specifications e _ If the monitor when set to HDMI DisplayPort Mini DP U24E850R or HDMI 1 HDMI 2 DisplayPort Mini DP U28E850R U32E850R is in power saving mode or is displaying the message Check Signal Cable press the button to display the On Screen Display OSD You can select 1 1 or 1 2 e Ifyou select 1 1 the maximum resolution of your screen drops to 2560 x 1440 due to the limitations in HBR1 transmission speeds 6 6 1 Configuring DisplayPort Ver 1 Press any button on the front of the product to display the Function Key Guide Next press IJ to display the corresponding menu screen 2 Press e to move to System and press Q ce on the product 3 Press to move to DisplayPort Ver and press t C on the product The following screen will appear Select your Displayport FreeSync Displayport 1 1 supports HBR 1 Smart Eco Saving wiles supports Off Timer Plus USB Super Charging PC AV Mode DisplayPort Ver Source Detection e 1 1 1 2 4 Press e e to move to the option you want and press a c 5 The selected option will be applied 6 Setup and Reset 91 6 7 Setup and Reset Source Detection You can activate Source Detection Not available when PIP PBP Mode is set to On 6 7 1 Configuring Source Detection 1 2 Press any button on the front of the product to display the Function Key Guide Next press H to display the correspond
57. lack Level may not be compatible with some source devices 3 8 Screen Setup Eye Saver Mode K Not available when PIP PBP Mode is set to On Set to an optimum picture quality suitable for eye relaxation T V Rheinland Low Blue Light Content is a certification for products which meet requirements for lower blue light levels When Eye Saver Mode is On the blue light that wavelength is around 400nm will decrease and it will provide an optimum picture quality suitable for eye relaxation At the same time the blue light level is lower than in the default settings and it was tested by T V Rheinland and certified as it met the requirements of T V Rheinland Low Blue Light Content standards 3 8 1 Configuring Eye Saver Mode 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e to move to Picture and press H C on the product 3 Press e e to move to Eye Saver Mode and press t c on the product The following screen will appear U24E850R U32E850R MAG GBright Dynamic Brightness 100 Contrast 75 Sharpness 60 Color HDMI Black Level Eye Saver Mode Optimize HDMI picture brightness and contrast by adjusting the black level of the video signal lt E ee e U28E850R Eye Saver Mode Game Mode Response Time Picture Size Set to an optimum picture quality suita
58. lect Custom which automatically recalls your personalized picture settings e Dynamic Select this mode to view a sharper image than in Standard mode e Standard Select this mode when the surroundings are bright This also provides a sharp image e Movie Select this mode when the surroundings are dark This will save power and reduce eye fatigue e Custom Select this mode when you want to adjust the image according to your preferences Press e e to move to the option you want and press M c The selected option will be applied 3 2 Screen Setup Brightness You can adjust the general brightness of the picture Range 0 100 A higher value will make the picture appear brighter A e This menu is not available when fa gicBright is set to Dynamic Contrast mode e This menu is not available when Smart Eco Saving is enabled e This menu is not available when Eye Saver Mode is enabled 3 2 1 Configuring Brightness 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e to move to Picture and press 3 2 on the product 3 Press e e to move to Brightness and press t c on the product The following screen will appear U24E850R U32E850R Adjust the brightness level Values closer to SAMSUNG MAG ICBright Custom 100 mean a brighter screen Brightness 100 Contrast 75 Sh
59. llowed S Activities marked by this symbol are prohibited Instructions marked by this symbol must be followed Before Using the Product EDE Before Using the Product Electricity and Safety A The following images are for reference only Real life situations may differ from what is shown in the images A Warning Do not use a damaged power cord or plug or a loose power socket e An electric shock or fire may result Do not plug many products into the same power socket e Otherwise the socket may overheat and cause a fire Do not touch the power plug with wet hands e Otherwise an electric shock may result Insert the power plug all the way in so it is not loose e An unstable connection may cause a fire Connect the power plug to a grounded power socket type 1 insulated devices only e An electric shock or injury may result Do not bend or pull the power cord with force Do not weigh the power cord down with a heavy object e A damaged power cord may cause an electric shock or fire Do not place the power cord or product near heat sources e An electric shock or fire may result Remove foreign substances such as dust around the plug pins and power socket with a dry cloth e Otherwise a fire may result Before Using the Product Do not unp
60. lug the power cord when the product is in use e The product may become damaged by an electric shock Do not use the power cord for products other than authorized products supplied by Samsung e An electric shock or fire may result Keep the power socket where the power cord is connected unobstructed e If any problem occurs in the product unplug the power cable to completely cut the power to the product Power to the product cannot be completely cut off with the power button Hold the plug when disconnecting the power cord from the power socket An electric shock or fire may result Installation and Safety A Warning DO NOT PLACE CANDLES INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES e Otherwise a fire may result Avoid installing the product in a narrow space with bad ventilation such as a bookshelf or wall closet e Otherwise a fire may result due to an increased internal temperature Keep the plastic packaging bag for the product in a place that cannot be reached by children e Children may suffocate Before Using the Product 12 Before Using the Product S Do not install the product on an unstable or vibrating surface insecure shelf sloped surface etc e The pr
61. lus USB Super Charging PC AV Mode DisplayPort Ver Source Detection e Off Deactivate the Smart Eco Saving function e On The power consumption will automatically be reduced by about 10 over the current setting The reduction of power consumption depends on the customer screen brightness condition 4 Press e e to move to the option you want and press 39 01 5 The selected option will be applied 6 Setup and Reset 83 6 3 Setup and Reset Off Timer Plus You can set the product to automatically turn off 6 3 1 Configuring Off Timer Off Timer 1 Press any button on the front of the product to display the Function Key Guide Next press IJ to display the corresponding menu screen 2 Press e to move to System and press 0 0 on the product 3 Press e to move to Off Timer Plus and press t C3 on the product 4 Press e to move to Off Timer and press H m on the product 5 Press e e to move to Off Timer and press 3 3 on the product The following screen will appear Set the monitor to automatically turn off FreeSync after a certain time period Smart Eco Saving Off Timer Plus USB Super Charging PC AV Mode DisplayPort Ver Source Detection Enable or disable the Off Timer Off Timer Eco Timer Enable or disable the Off Timer Off Timer lt H H lt e Off Deactivate the off timer so that the product does not power off automat
62. m picture quality suitable MAGI CBright Custom for the working environment Brightness Standard Contrast Cinema Sharpness Dynamic Contrast Color Eye Saver Mode lt FH HAHA Screen Setup U28E850R Set to an optimum picture quality suitable MAG IGBright Custom for the working environment Brightness Standard Contrast Cinema Sharpness Dynamic Contrast Color RABNEAngle e Custom Customize the contrast and brightness as required e Standard Obtain a picture quality suitable for editing documents or using Internet e Cinema Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content e Dynamic Contrast Obtain balanced brightness through automatic contrast adjustment Screen Setup U24E850R U32E850R Set to an optimum picture quality suitable MAGICBright Dynamic for the working environment Brightness Standard Contrast Movie Sharpness Custom Color Eye Saver Mode lt A 4 U28E850R Set to an optimum picture quality suitable MAGI CBright Dynamic for the working environment Brightness Standard Contrast Movie Sharpness Custom Color RAYGA When the external input is connected through HDMI DP MINI DP and PC AV Mode is set to AV MaGicerght has four automatic picture settings Dynamic Standard Movie and Custom that are preset at the factory You can activate either Dynamic Standard Movie or Custom You can se
63. n to O disconnect the power cord Be sure to disconnect the power cable when you will not be using the product for an extended period of time To reduce the power consumption to O watts when the power switch is not available disconnect the power cable 10 Specifications v Specifications 10 3 Standard Signal Mode Table A e This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel Therefore a resolution other than the specified resolution may degrade the picture quality To avoid this it is recommended that you select the optimum resolution specified for the screen size of your product e Check the frequency when you exchange a CDT monitor connected to a PC for an LCD monitor If the LCD monitor does not support 85Hz change the vertical frequency to 60Hz using the CDT monitor before you exchange it with the LCD monitor Model Name U24E850R Synchronization Horizontal Frequency 30 135 kHz DisplayPort MINI DP HDMI Vertical Frequency 56 75 Hz DisplayPort MINI DP 24 75 Hz HDMI Resolution Optimum Resolution 3840 x 2160 60 Hz DisplayPort MINI DP HDMI Maximum Resolution 3840 x 2160 60 Hz DisplayPort MINI DP HDMI Model Name U28E850R U32E850R Synchronization Horizontal Frequency 30 135 kHz DisplayPort MINI DP 30 90 kHz HDMI1 30 185 kHz HDMI2 Vertical Frequency 56 75 Hz Displa
64. ng and Using a Source Device Before Connecting 2 1 1 Pre connection Checkpoints e Before connecting a source device read the user manual provided with it The number and locations of ports on source devices may differ from device to device e Do not connect the power cable until all connections are completed Connecting the power cable during connection may damage the product e Check the types of ports at the back of the product you want to connect Connecting and Using a PC Select a connection method suitable for your PC K e Connecting parts may differ in different products To ensure the screen displays properly do not use HDMI to DP micro HDMI to DP or other nonstandard cables bought from a dealer It is recommended that you use the cables that came with the product e If you don t use the cable that came with the components of the monitor the monitor may not support the best resolution 2 2 1 Connection Using the HDMI Cable WZ Do not connect the power cable before connecting all other cables Ensure you connect a source device first before connecting the power cable U24E850R HDMI IN 1 Connect the HDMI cable to the HDMI IN port on the back of the product and the HDMI port on the PC 2 Press 3 0 to change the input source to HDMI Connecting and Using a Source Device A e Provided ports may vary depending on the product Todisplay 3840 x 2160 60 Hz use an HDMI c
65. ng the wall mount kit remove the stand Preparations 1 3 4 Adjusting the Product Tilt and Height 4 The color and shape of parts may differ from what is shown Z Specifications are subject to change without notice to improve quality 5 2 22 1 5 2 0 130 mm 3 mm The monitor tilt and height can be adjusted e Hold the top center of the product and adjust the height carefully 1 3 5 Rotating the Monitor Screen You can rotate your monitor as shown below IZ gt Adjust the screen following the arrow direction e Rotate the screen in clockwise direction till it becomes completely vertical to the desktop e The monitor may get damaged if you rotate the screen without tilt or counter clockwise direction Preparations 1 3 6 Anti theft Lock An anti theft lock allows you to use the product securely even in public places The locking device shape and locking method depend on the manufacturer Refer to the user guide provided with your anti theft locking device for details The lock device is sold separately IZ The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality To lock an anti theft locking device 1 Fix the cable of your anti theft locking device to a heavy object such as a desk 2 Put on
66. nu is not displayed will change the input source U24E850R DisplayPort Mini DP HDMI oe U28E850R U32E850R DisplayPort Mini DP HDMI 1 HDMI 2 If you power on the product or change the input source by pressing the 1 3 button a message that shows the changed input source will appear at the top left corner of the screen ral Press the button when configuring settings for the PIP PBP function is required 0 Turn the screen on or off Function Key Guide When a control button on the product is pressed the Function Key Guide will be displayed before the onscreen menu opens The guide shows the function of the button pressed To access the onscreen menu when the guide is displayed press the corresponding button again The Function Key Guide may vary depending on the function or product model Refer to the actual product 1 Preparations 20 Preparations 1 2 2 Reverse Side WZ The color and shape of parts may differ from what is shown lt Specifications are subject to change without notice to improve quality U24E850R p z l l i 0 i POWER IN HDMI IN MINI DP IN 3 SS m Port Description POWER IN Connect the power cord for your monitor to the POWER IN port on i il the back of the product HDMI IN Connect to a source device using an HDMI cable DP IN
67. oduct at the same time A PC cannot connect to multiple source devices at the same time as it has a limited number of input output ports available The HUB feature on the product will improve your work efficiency by allowing you to connect multiple source devices to the USB ports on the product at the same time without connecting them to a PC Ay F ammm eens If multiple source devices are connected to the PC the many cables around the PC may look messy Connecting the devices directly to the product will resolve such inconvenience Connect a mobile device such as an MPS player or smartphone to the product when connected to a PC This allows you to control the device from the PC or charge the device battery A e To detect and start a source device faster connect the device to the USB 3 0 port on the product e An external mass storage HDD requires an external power supply Be sure to connect it to a power source 2 Connecting and Using a Source Device 40 Connecting and Using a Source Device e High speed charging is possible using the ss lt 3 1 and ss lt 3 2 ports only These ports charge devices faster than typical USB ports The speed depends on the connected devices e Battery charging is possible in power saving mode However it is not possible when the product is powered off e Battery charging is not possible if the power cable is disconnected from the power socket e Mobile devi
68. oduct may fall and break or cause a personal injury e Using the product in an area with excess vibration may damage the product or cause a fire Do not install the product in a vehicle or a place exposed to dust moisture water drips etc oil or smoke e An electric shock or fire may result Do not expose the product to direct sunlight heat or a hot object such as a stove e Otherwise the product lifespan may be reduced or a fire may result Do not install the product within the reach of young children The product may fall and injure children Edible oil such as soybean oil can damage or deform the product Do not install the product in a kitchen or near a kitchen counter Take care not to drop the product when moving it e Otherwise product failure or personal injury may result Do not set down the product on its front e The screen may become damaged When installing the product on a cabinet or shelf make sure that the bottom edge of the front of the product is not protruding e The product may fall and break or cause a personal injury e Install the product only on cabinets or shelves of the right size Before Using the Product 13 Before Using the Product Put down the product carefully e The product may fall and break or cause a personal injury Installing the product in an unusual place a place exposed to a lot of fine dust ch
69. olution of 1920 x 1200 consists of 1920 horizontal pixels horizontal resolution and 1200 vertical lines vertical resolution Plug amp Play The Plug amp Play feature allows the automatic exchange of information between a monitor and PC to produce an optimum display environment The monitor uses VESA DDC international standard to execute Plug amp Play Index B Before Connecting 35 Brightness 47 C Checking the Contents 18 Connecting and Using a PC 35 Contrast 48 Copyright 7 Correct Disposal 114 Correct posture to use the product 17 D Display Time 79 DisplayPort Ver 91 E Easy Setting Box 97 Eye Saver Mode 55 FreeSync 80 G Game Mode 56 General 104 H HDMI Black Level 54 INFORMATION 95 Installation 27 K Key Repeat Time 93 L Language 78 O Off Timer 84 P Parts 19 PC AV Mode 89 Picture Size 58 PowerSaver 107 Q Q amp A 102 R Requirements Before Contacting Samsung Customer Service Center 99 Reset All 94 Response Time 57 Responsibility for the Pay Service Cost to Customers 113 Rotating the monitor 34 S Safety Precautions 10 SAMSUNG MAGIC Angle 52 SAMSUNG MAGIC Bright 44 Sharpness 49 Smart Eco Saving 83 Source Detection 92 Standard Signal Mode Table 108 Index T Terminology 115 Transparency 77 U USB Super Charging 88 Utilizing the Product as a USB HUB 40
70. product after cleaning the product 6 Power on the monitor and computer Before Using the Product Securing the Installation Space Ensure some space around the product for ventilation An internal temperature rise may cause fire and damage the product Be sure to allow the amount of space as shown below or greater when installing the product A The exterior may differ depending on the product 3 93 inches 10 cm 3 93 inches 10cm 1 3 93 inches 10 cm 3 93 inches 10 cm Precautions for storage A Be sure to contact Samsung Customer Service Center if the inside of the monitor needs cleaning Service fee will be charged Before Using the Product Safety Precautions Caution RISK OF ELECTRIC SHOCK DO NOT OPEN Caution TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK THERE ARE NO USER SERVICEABLE PARTS INSIDE REFER ALL SERVICING TO QUALIFIED PERSONNEL This symbol indicates that high voltage is present inside It is dangerous to make any kind of contact with any internal part of this product AN A Symbols A Warning This symbol alerts you that important literature concerning operation and maintenance has been included with this product A serious or fatal injury may result if instructions are not followed A Caution Personal injury or damage to properties may result if instructions are not fo
71. ption will be applied 3 4 Screen Setup Sharpness Make the outline of objects more clear or blurry Range 0 100 A higher value will make the outline of objects clearer A e This option is not available when A gicBright is in Cinema or Dynamic Contrast mode e This menu is not available when Game Mode is enabled Not available when PIP PBP Mode is set to On 3 4 1 Configuring Sharpness 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e to move to Picture and press H C on the product 3 Press e to move to Sharpness and press 3 2 on the product The following screen will appear U24E850R U32E850R Adjust the sharpness icture SAMSUNG of the picture MAG ICBright Custom Values closer to 100 mean a sharper image Brightness 100 Contrast 75 Sharpness 60 Color gt Eye Saver Mode U28E850R Adjust the sharpness of the picture MAG GBright Custom Values closer to 100 mean a sharper image Brightness 100 Contrast 75 Sharpness 60 Color gt MAGICAngle of 4 Adjust the Sharpness using the e e buttons 5 The selected option will be applied 3 5 Screen Setup Color A detailed description of each function is provided Refer to your product for details A e Adjust the tint of the screen This menu is not available when fa G eBright is set to C
72. r wall mount on a solid wall perpendicular to the floor Before attaching the wall mount to surfaces other than plaster board please contact your nearest dealer for additional information If you install the product on a slanted wall it may fall and result in severe personal injury Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided A Do not fasten the screws too firmly This may damage the product or cause the product to fall leading to personal injury Samsung is not liable for these kinds of accidents e Samsung is not liable for product damage or personal injury when a non VESA or non specified wall mount is used or the For wall mounts that do not comply with the VESA standard screw specifications the length of the screws may differ depending on the wall mount specifications consumer fails to follow the product installation instructions e Do not mount the product at more than a 15 degree tilt e Always have two people mount the product on a wall Standard dimensions for wall mount kits are shown in the table below Unit mm inches VESA screw hole Model name specs A B in Standard Screw Quantity millimeters U24E850R U28E850R U32E850R 100 x 100 3 9 x 3 9 M4 u Do not install your Wall Mount Kit while your product is turned on It may result in personal injury due to electric shock
73. raphics card can support FreeSync and need to install the AMD s latest official FreeSync driver Radeon R9 290X 290 Radeon R9 285 Radeon R7 260X 260 AMD A10 Kaveri APU ex A10 7850K e For additional AMD graphics card models that support the FreeSync feature visit the official AMD website e If the FreeSync function is enabled the response rate during the game may fluctuate depending on the resolution A higher resolution generally decreases the response rate e Ifthe FreeSync function is enabled the screen can flicker depending on the game option settings Decreasing the game setting values might help to remove the flicker Installing the latest drivers from the AMD website may also fix this issue 6 Setup and Reset 81 Setup and Reset Point the right mouse button select the AMD Catalyst Control Center x AMD Catalyst Control Center View Sort by Refresh Paste Paste shortcut New Gadgets 52 8 AMD RADEON Pones Presets Deuse a Common Oxsplay Tasks My Degat Fiat AMDa RADEON My Ongtat Flat Parets Properties Ouzias Mut Pettormance gt Auda gt tammon Screen resolution Personalize AMD Catalyst Control Center AMD Home Enhance your vsus experience mith AMD EY iA Check for driver updates Unleash your system s capabilities Check for the latest experiences and downloads Contact Customer Care Visit amd com Follow Catal
74. red trademarks of the Video Electronics Standards Association An administration fee may be charged if either o a an engineer is called out at your request and there is no defect in the product i e where you have failed to read this user manual o b you bring the unit to a repair center and there is no defect in the product i e where you have failed to read this user manual e The amount of such administration charge will be advised to you before any work or home visit is carried out Icons used in this manual We The following images are for reference only Real life situations may A differ from what is shown in the images Before Using the Product Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched Take the following steps when cleaning 1 Power off the monitor and computer 2 Disconnect the power cord from the monitor 4 Hold the power cable by the plug and do not touch the cable with wet we hands Otherwise an electric shock may result 3 Wipe the monitor with a clean soft and dry cloth Do not apply a cleaning agent that contains alcohol solvent or surfactant to the monitor e Do not spray water or detergent directly on the product an N 9 4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the monitor 5 Connect the power cord to the
75. s headphones x10 Connect to an external device Preparations 1 3 Installation 1 3 1 Removing the Stand 4 The color and shape of parts may differ from what is shown Specifications are subject to change without notice to improve quality e Power the product off and remove the power cable from the power socket Place a protective cloth or Unfasten the screw from the Lift and detach the stand cushion on a flat surface Next back of the product place the product with the face down on top of the cloth or cushion Caution Do not place your hands in the Do not put the hand below the Do not hold the product upside swiveling area stand body down only by the stand Preparations 1 3 2 Installing the Wall Mount Installing the Wall Mount Kit The wall mount kit allows you to mount the product on the wall Purchase a compatible wall mount kit to use with the product For detailed information on installing the wall mount see the instructions provided with the wall mount We recommend you contact a technician for assistance when installing the wall mount bracket Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own Preparations Wall Mount Kit Specifications VESA K Install you
76. se HDMI Black Level can be used to adjust the image quality If this is the case correct the degraded picture quality using HDMI Black Level A e This function is only available in HDMI HDMI 1 or HDMI 2 mode Not available when PIP PBP Mode is set to On 3 7 1 Configuring the HDMI Black Level Settings 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e to move to Picture and press 2 ce on the product 3 Press e to move to HDMI Black Level and press H C on the product The following screen will appear U24E850R U32E850R Optimize HDMI picture SAMSUNG brightness and contrast MAGICBright Dynamic by adjusting the black level of the video signal Brightness gt gt gt 100 A0 Contrast 75 Sharpness Normal Color HDMI Black Level suw Eye Saver Mode U28E850R Optimize HDMI picture brightness and contrast MAGI EBright Dynamic by adjusting the black level of the video signal Brightness 100 Contrast 75 Sharpness 60 Color SAMSUNG MAGICAngle HDMI Black Level e Normal Select this mode when there is no contrast ratio degradation e Low Select this mode to reduce the black level and increase the white level when there is a contrast ratio degradation 4 Press to move to the option you want and press a c 5 The selected option will be applied HDMI B
77. st the Brightness Contrast Volume using the e e buttons 7 Information Menu and Others 96 Installing the Software 8 1 Easy Setting Box Li Easy Setting Box Easy Setting Box enables users to use the monitor by partitioning multiple sections 8 1 1 Installing the Software 1 Insert the installation CD into the CD ROM drive 2 Select the Easy Setting Box setup program A If the pop up screen for the software installation does not appear on the main screen find and double click the Easy Setting Box setup file on the CD ROM 3 When the Installation Wizard appears click Next 4 Follow the instructions given on the screen to proceed with installation 4 e The software may not work properly if you do not restart the computer after the installation e The Easy Setting Box icon may not appear depending on the computer system and the product specifications e Ifthe shortcut icon does not appear press the F5 key Restrictions and Problems with the Installation Easy Setting Box The Easy Setting Box installation may be affected by the Graphics Card Motherboard and the Networking Environment System Requirements OS e Windows XP 32Bit 64Bit e Windows Vista 32Bit 64Bit e Windows 7 32Bit 64Bit e Windows 8 32Bit 64Bit Hardware e Atleast 32MB of memory e Atleast GOMB of free space on the hard disk drive Installing the Software 8 1 2 Removing the Software Click Start select Settings
78. t on the side of the product and the other end to the DP port on the PC 2 Press 0 0 to change the input source to DisplayPort A e Provided ports may vary depending on the product To display 3840 x 2160 60 Hz use a DP cable that supports 3840 x 2160 60 Hz Make sure that the graphics card of the DP source supports 3840 x 2160 60 Hz 2 2 3 Connection Using the MINI DP Cable WZ Do not connect the power cable before connecting all other cables Ensure you connect a source device first before connecting the power cable MINI DP IN 1 Connect one end of the MINI DP cable to the MINI DP IN port on the side of the product and the other end to the DP port on the PC 2 Press 0 0 to change the input source to Mini DP K e Provided ports may vary depending on the product To display 3840 x 2160 60 Hz use a MINI DP cable that supports 3840 x 2160 60 Hz Make sure that the graphics card of the MINI DP source supports 3840 x 2160 60 Hz The DisplayPort and Mini DP can t be identified at the same time so if the DisplayPort or Mini DP not as a source the PC may not be able to identify 2 Connecting and Using a Source Device Connecting and Using a Source Device 2 2 4 Connecting to Headphones H Do not connect the power cable before connecting all other cables L Ensure you connect a source device first before connecting the power cable 1 Connect an audio output device such as headphones to Q port on
79. the PIP PBP Mode sub screen PIP PBP Mode sub screen Size Size Sound Source Sound Source Source Source Left Left Picture Size HDMI Picture Size HDMI 2 Contrast 751100 Contrast A Right Right DisplayPort HH H AH BH HAM 0 I Select the icon image if you want to use PBP mode where the optimum resolution for the left and right sides of the screen is 1920 x 2160 width x height E Select the icon image if you want to use PIP mode where the optimum resolution for the sub screen is 720 x 480 width x height e E Select the icon image if you want to use PIP mode where the optimum resolution of the sub screen is 1280 x 720 width x height e E Select the icon image if you want to use PIP mode where the optimum resolution of the sub screen is 1920 x 1080 width x height 4 Press e e to move to the option you want and press 9 0 5 The selected option will be applied 4 Configuring the PIP PBP Settings 64 Configuring the PIP PBP Settings 4 1 3 Configuring Position Select the position of the sub screen from the available options 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e to move to PIP PBP and press 3 0 on the product 3 Press e to move to Position and press H C on the product The following screen will appear U24E850R U28E850R U32E850R
80. the product K e The sound could only be heard when you video card s ports support audio out e Provided ports may vary depending on the product Connecting and Using a Source Device 2 2 5 Connecting the Power K e Connecting parts may differ in different products e The exterior may differ depending on the product e To use the product connect the power cable to a power outlet and the POWER IN port on the product POWER IN A The input voltage is switched automatically 2 2 6 Tidying Up the Connected Cables 2 3 Connecting and Using a Source Device Connecting the Product to a PC as a USB HUB 2 3 1 Connecting a PC to the Product A The product can function as a HUB by connecting to a PC via a USB cable You can connect a source device directly to the product and control the device from the product without having to connect the device to the PC To use the product as a USB hub connect the product to a PC using a USB cable Connect the USB cable to m on the back of the product and USB on the PC A USB 2 0 cable can be used to connect the product to a PC However to take full advantage of the USB 3 0 function connect a USB 3 0 cable between the PC and the product Ensure the PC supports USB 3 0 2 3 2 Utilizing the Product as a USB HUB Using the product as a hub connect and use various source devices with the pr
81. times per second The screen scanning rate depends on the performance of the graphics cards in your PC and monitor Horizontal Frequency Characters or images displayed on the monitor screen consist of numerous dots pixels Pixels are transmitted in horizontal lines which are then arranged vertically to create an image The horizontal frequency is measured in kHz and represents how many times horizontal lines per second are transmitted and displayed on the monitor screen A horizontal frequency of 85 means that the horizontal lines that make up an image are transmitted 85000 times per second The horizontal frequency is indicated in 85kHz Vertical Frequency One image is made of numerous horizontal lines The vertical frequency is measured in Hz and represents how many images can be created per second by those horizontal lines A vertical frequency of 60 means that an image is transmitted 60 times per second The vertical frequency is also called refresh rate and affects screen flicker Appendix 115 Appendix Resolution Resolution is the number of horizontal pixels and vertical pixels that form a screen It represents the level of display detail A higher resolution displays a greater amount of information on the screen and is suitable for performing multiple tasks at the same time E g A resolution of 1920 x 1080 consists of 1920 horizontal pixels horizontal resolution and 1080 vertical lines vertical resolution E g A res
82. tions 1 2 Parts 1 2 1 Frontal Button IZ The color and shape of parts may differ from what is shown e Specifications are subject to change without notice to improve quality Function Key Guide SAVER SOURCE PIP PBP lt gt R c N 7 NOUA T Icons Description Open or close the onscreen display OSD menu or return to the parent menu e OSD control lock Maintain the current settings or lock the OSD control to prevent unintended changes to settings e Enable To lock the OSD control press and hold the TT button for 10 seconds ou e Disable To unlock the OSD control press and hold the H button for 10 seconds 74 If the OSD control is locked Brightness Contrast and Volume can be adjusted PIP PBP and Eye Saver Mode are available Information can be viewed Select Ce to display and access the following menu items Press to enable or disable Eye Saver Mode The items below are not available if the Eye Saver Mode function is gt enable e PICTURE Game Mode fras ieBright frasi cAngle Brightness e COLOR e System Smart Eco Saving 1 Preparations ETE Preparations Icons Description Move to the upper or lower menu or adjust the value for an option on the ea OSD menu Adjust the screen brightness contrast and volume Confirm a menu selection Pressing the O C button when the OSD me
83. tting will only be applied to the onscreen menu display e It will not be applied to other functions on your PC 5 2 1 Configuring Language 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press to move to OnScreen Display and press 3 2 on the product 3 Press e e to move to Language and press 7 2 on the product The following screen will appear Set the menu language Transparency Language Deutsch Display Time English Espa ol Fran ais Italiano 4 Press e to move to the language you want and press 3 0 5 The selected option will be applied 5 3 Coordinating OSD Display Time Set the on screen display OSD menu to automatically disappear if the menu is not used for a specified period of time Display Time can be used to specify the time after which you want the OSD menu to disappear 5 3 1 Configuring Display Time 1 Press any button on the front of the product to display the Function Key Guide Next press J to display the corresponding menu screen 2 Press e to move to OnScreen Display and press 3 2 on the product 3 Press e e to move to Display Time and press t c on the product The following screen will appear Set how long the menu window will remain on Transparency screen for when it is not in use Language Display Time 5 sec 10 sec
84. ture Size 1 Press any button on the front of the product to display the Function Key Guide Next press IM to display the corresponding menu screen 2 Press e e to move to Picture and press 3 0 on the product 3 Press e e to move to Picture Size and press c on the product The following screen will appear In PC mode U24E850R U32E850R Choose the size and aspect ratio of the Game Mode picture displayed on screen Response Time Picture Size U28E850R Choose the size and aspect ratio of the Eye Saver Mode picture displayed on screen Game Mode Response Time Picture Size e Auto Display the picture according to the aspect ratio of the input source e Wide Display the picture in full screen regardless of the aspect ratio of the input source Screen Setup In AV mode U24E850R U32E850R Choose the size and aspect ratio of the Game Mode picture displayed on screen Response Time Picture Size 4 3 16 9 Screen Fit HH H AH U28E850R Choose the size and aspect ratio of the Eye Saver Mode picture displayed on screen Game Mode Response Time Picture Size 4 3 16 9 Screen Fit e 4 3 Display the picture with an aspect ratio of 4 3 Suitable for videos and standard broadcasts e 16 9 Display the picture with an aspect ratio of 16 9 e Screen Fit Display the picture of the sub screen with the original aspect ratio without cutting off
85. under Monitor settings Windows ME 2000 Go to Control Panel gt Display gt Settings Advanced Monitor and adjust Refresh rate under Monitor settings Windows Vista Go to Control Panel gt Appearance and Personalization Personalization Display Settings Advanced Settings Monitor and adjust Refresh rate under Monitor settings Windows 7 Go to Control Panel gt Appearance and Personalization Display gt Screen Resolution Advanced settings Monitor and adjust Refresh rate under Monitor settings Windows 8 Go to Settings Control Panel Appearance and Personalization Display gt Screen Resolution Advanced settings Monitor and adjust Refresh rate under Monitor settings 9 Troubleshooting Guide 102 Troubleshooting Guide Question Answer How can change the resolution Windows XP Go to Control Panel gt Appearance and Themes Display Settings and adjust the resolution Windows ME 2000 Go to Control Panel gt Display gt Settings and adjust the resolution Windows Vista Go to Control Panel gt Appearance and Personalization gt Personalize Display Settings and adjust the resolution Windows 7 Go to Control Panel gt Appearance and Personalization Display gt Adjust Resolution and adjust the resolution Windows 8 Go to Settings Control Panel gt Appearance and Personalization Display Adjust Resolut
86. up 56 Screen Setup 3 10 Response Time Accelerate the panel response rate to make video appear more vivid and natural WZ e Itis best to set Response Time to Standard or Faster when you are not viewing a movie e This menu is not available when PIP PBP Mode is set to On and the Size is set to E E E PIP Mode 3 10 1 Configuring the Response Time 1 Press any button on the front of the product to display the Function Key Guide Next press I to display the corresponding menu screen 2 Press e e to move to Picture and press 3 0 on the product 3 Press e to move to Response Time and press 3 2 on the product The following screen will appear U24E850R U32E850R Accelerate the panel response rate to make Game Mode video appear more vivid and natural Response Time Standard Picture Size Faster Fastest KI H e U28E850R Accelerate the panel response rate to make Eye Saver Mode video appear more vivid and natural Game Mode Response Time Standard Picture Size Faster Fastest 4 Press to move to the option you want and press a c 5 The selected option will be applied Screen Setup 3 11 Picture Size Change the picture size WZ This menu is not available when PIP PBP Mode is set to On and the Size is set to I PBP Mode This menu is not available when FreeSync is enabled 3 11 1 Changing the Pic
87. y Do not use humidifiers or stoves around the product An electric shock or fire may result Rest your eyes for more than 5 minutes for every 1 hour of product use Eye fatigue will be relieved Do not touch the screen when the product has been turned on for an extended period of time as it will become hot Store the small accessories used with the product out of reach of children Before Using the Product 16 Before Using the Product Exercise caution when adjusting the product angle or stand height e Otherwise children s fingers or hands may become stuck and injured e _ Tilting the product excessively may cause it to fall and result in personal injury Do not place heavy objects on the product e Product failure or personal injure may result When using headphones or earphones do not turn the volume too high e Having the sound too loud may damage your hearing Correct posture to use the product Use the product in the correct posture as follows e Straighten your back e Allow a distance of 45 to 50 cm between your eye and the screen and look slightly downward at the screen Keep your eyes directly in front of the screen e Adjust the angle so light does not reflect on the screen e Keep your forearms perpendicular to your upper arms and level with the back of your hands e Keep your elbows at about a right angle e Adjust the height of the product so you can k
88. yPort MINI DP 24 75 Hz HDMI1 HDMI2 Resolution Optimum Resolution 3840 x 2160 60 Hz DisplayPort MINI DP 3840 x 2160 30 Hz HDMI1 3840 x 2160 60 Hz HDMI2 Maximum Resolution 3840 x 2160 60 Hz DisplayPort MINI DP 3840 x 2160 30 Hz HDMI1 3840 x 2160 60 Hz HDMI2 If a signal that belongs to the following standard signal modes is transmitted from your PC the screen will automatically be adjusted If the signal transmitted from the PC does not belong to the standard signal modes the screen may be blank even though the power LED turns on In such a case change the settings according to the following table by referring to the graphics card user manual 10 Specifications 108 v Specifications U24E850R Displayport MINI DP HDMI Resolution Sene Regue G Sm tory kHz Hz IBM 720 x 400 31 469 70 087 28 322 VESA 640 x 480 31 469 59 940 25 175 MAC 640 x 480 35 000 66 667 30 240 VESA 640 x 480 37 861 72 809 31 500 VESA 640 x 480 37 500 75 000 31 500 VESA 800 x 600 35 156 56 250 36 000 VESA 800 x 600 37 879 60 317 40 000 VESA 800 x 600 48 077 72 188 50 000 VESA 800 x 600 46 875 75 000 49 500 MAC 882 x 624 49 726 74 551 57 284 VESA 1024 x 768 48 363 60 004 65 000 VESA 1024 x 768 56 476 70 069 75 000 VESA 1024 x 768 60 02
89. ystMaker on Twitter F Allow Web content S7 Show this page on startup AMD Catalyst Control Center Properties Digital Flat Panel e View aras configure ODU properties UAA a POONA ORDON and IOAR ratel scale mages and enable video quality processing for HOMI Sagiayt Maximum reported refresh rate gt 60 Hz Multi stream transport capable No Image Scaling Preferences Enable GPU up scaling Preferred Scaling Mode Maman aspect ratio S lt ale image to hu parei size Une centered terangs Color Depth Currem color depth 10 bpe Preterred color q Enable FreeSync for static screen video playback Hreesyrx ad gaming v Enable FreeSyr lt 6 Setup and Reset 6 2 Setup and Reset Smart Eco Saving The Smart Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel A e This menu is not available when Eye Saver Mode is enabled Not available when PIP PBP Mode is set to On 6 2 1 Configuring Smart Eco Saving 1 Press any button on the front of the product to display the Function Key Guide Next press IJ to display the corresponding menu screen 2 Press e e to move to System and press Q c3 on the product 3 Press e e to move to Smart Eco Saving and press t C on the product The following screen will appear Adjust the power consumption of the FreeSync product to save energy Smart Eco Saving Off Timer P

Samsung 24" Professional UHD Monitor with multi-tasking functionality User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung 24&quot; Professional UHD Monitor with multi-tasking functionality User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents

Samsung 24" Professional UHD Monitor with multi-tasking functionality User Manual