Home

Samsung NP-M55 User Manual

image

Contents

1. If You Reinstall Windows You should re establish hibernate in power options by opening Power Options Properties window and click on the Hibernate tab then click Enable Hibernation Power Options Properties Powe Schemec lami Power Meta Advanced Hibemate Hibernate Tab 5 When pour Oompube hbemabat d clones whaea i hai im Ap memo on pou had dak arid then shair dovan When pour campuha cones oui of hbensai ieber lo As pevnr slate Hibemate Enable bhemahon Disk space fot bdbennadion Free dick space 16481 MB Dik apos nequined bo hbemalis 113 M Frequent Interruptions If you experience frequent interruptions you might also consider putting your computer into automatic hibernation after a specified number of minutes using the power management options System Management 105 Standby Mode Power Management or Manual Method Standby is used mainly for conserving battery power in your notebook computer It also gives you the benefit of getting right back to your work without waiting for the computer to restart Standby turns off your monitor and hard disks placing your entire system in a low power state When you return to your computer restores your desktop exactly as you left it It is recommended that you do not enter standby mode with less than 20 battery power 5 Click OK to set your power management options and close the window Rest Key The manual lt Fn Esc 2 gt key combination will not activ
2. Avoid bending or twisting your wrists as you work Your hands should float slightly above the keyboard Refer to a book on office ergonomics for more information on setting up your work area Take frequent breaks from working at the computer to rest your eyes and stretch your muscles Remember to save your data files frequently and to make backup copies of your files A walkie talkie must be kept more than 1 meter away from the device Since a walkie talkie transmits a very strong signal it may cause a computer malfunction Travelling with Your Computer Air Travel If you are travelling by air follow these tips e Take the computer with you as carry on luggage Do not check the computer with your baggage e Allow the computer and disks to go through the X ray security devices Do not hand carry disks through the walk through metal detectors which can cause loss of data o Be prepared to turn off the computer during take off and landing Please follow the instruction of the corresponding facilities regarding the use of wireless devices wireless LAN Bluetooth etc when in a wireless communication restricted area e g airplane hospital etc b Handling Spills Do not spill anything on your computer The best way to avoid spills is to avoid eating and drinking around your computer If you do spill something on your computer turn off your computer unplug it immediately and do the following o Ifyou s
3. On the Safely Remove Hardware dialog box select the appropriate PCMCIA card and click Stop When Stop a Hardware Device dialog box appears click OK Click Close to close the Safely Remove Hardware dialog box Push eject button of the PC card slot once and the button pops out Push the button again to eject the PCMCIA card Using EasyBox Use EasyBox program to make use of Windows complicated function easily and conveniently Learn about EasyBox Double click the EasyBox S icon on the desktop Or select Start gt All Programs gt Samsung gt EasyBox gt EasyBox FER E Sytem BIOs DESKTOP SECURITY PLUS TIP EASY BOX EASY BOX utilizes Windows further by AQ QNEQ STNG omplis ana diia Ue fentlionalilies Stallered aurr n Common i 2004 SAMSUNG ELEC TROMICS OO LID e System System management features are available including disk defragmenter disk cleanup computer scheduling and system restore e BIOS In windows based mode you can recover the BIOS defaults and change the boot sequence Desktop Desktop management features include changing the font size executing a magnifier function the start menu settings and managing the quick launch icons on the taskbar e Security Here you can configure the security settings supported by Windows XP SP2 You can also change the configuration of the firewall settings Windows automatic updates and blocking pop ups when connected to the Internet e Plus Tip This
4. Shadow RAM A write protected area of RAM that contains a copy of the BIOS As the computer boots the BIOS is copied from its permanent location in ROM to RAM The BIOS can be executed much faster in RAM than in ROM The BIOS remains in shadow RAM until you turn off the computer TFT thin film transistor LCD A TFT LCD uses a separate transistor circuit to control each pixel This technology provides the best resolution for an LCD screen A TFT LCD is also sometimes called an active matrix LCD Glossary 161 Contact SAMSUNG WORLD WIDE U K AUSTRALIA HONG KONG INDIA MALAYSIA SINGAPORE Contact SAMSUNG WORLD WIDE If you have any comments or questions regarding a Samsung products contact the SAMSUNG cus tomer care center Customer Care Center U K 0870 242 0303 Web Site www samsung com uk AUSTRALIA 1300 362 603 Web Site www samsung com au HONG KONG 2862 6001 Web Site www samsung com hk INDIA 3030 8282 1600 1100 11 Web Site www samsung con in Customer Care Center Z MALAYSIA 1800 88 9999 Web Site www samsung com my Customer Care Center B SINGAPORE 1800 SAMSUNG 7267864 Web Site www samsung com sg Customer Care Center Customer Care Center Customer Care Center FRANCE Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung veuillez contacter le Service Consommateurs Samsung Customer Ca
5. To maintain the current file system press lt Enter gt 5 Select the folder to install the Windows operating system To delete the previous version of Windows and install in the current folder press lt L gt on the keyboard 6 After the installation process copies the necessary folders for the Windows installation restart the system and the message Press any key to boot from CD is displayed You do not need to enter anything In a moment the Windows XP installation screen will appear to proceed with the installation 7 Follow the instructions of the Windows XP installation wizard to continue with the installation 8 When the installation is complete the computer will restart When the system has restarted the Press any key to boot from CD message appears Ignore the message The system boots and the Windows and Windows Registration screen appears Register Windows following the instructions to finish the Windows installation Remove the System Recovery CD and install the device drivers and application programs using Standard Installation from the System Software Media 152 Users Manual Specifications system Specification The system specifications will be described below The system specifications may differ depending on the derived models Item Specification Remarks CPU Intel Core processor Duo Optional Intel Core processor Solo Cache memory 2MB Main memory 512MB Max 4GB Memory type DDR2
6. Balanced Right click on the Desktop and select Properties from the pop up menu In the Display Properties window select the Settings tab gt Advanced gt GeForce Go xxxx tab Select the PowerMizer item slide the AC outlet and the battery sliders to Maximum Performance and then click the Apply button The picture is not displayed properly for some games Some games such as Harry Potter and the Sorcerer s Stone Harry Potter and the Chamber of Secrets etc may not display the picture properly when the screen resolution is set to 1024x768 and the color quality is set to 32 bit For these games set the screen resolution to 1024x768 and the color quality to 16 bit Game play is not displayed smoothly on the screen For 3D games the texture data for the 3D screen display is saved to the system memory If there is insufficient system memory the data is saved to the hard disk drive and loaded to memory when required This operation may temporarily stop displaying the picture on the screen In this case lower the game resolution or the screen settings For Delta Force Black Hawk Down Medal of Honor Battle Field 1942 etc Security Center Q1 Al A2 A3 Q2 To change the popup window display settings when connected to the Internet In the Windows XP SP2 environment you can decide whether to display a popup window when connected to the Internet for user convenience and security To display most of
7. Browse for Printer When the list of printers appears select the one you want to use Printer SMYPC14Samsung MJC 1310 Series Shared printers 3 Microsoft Windows Network WORKGROUP MYPC r MJC 1310 Samsung MJC 1310 Series Printer information Comment Samsung MJC 1310 Series Status Ready Documents waiting 0 lt Back QC Next gt J Cancel If you cannot find the desired printer try again after a while Read the warning about a shared printer and click Yes to install the shared printer Select Yes for Do you want to use this printer as a default printer and click Next Click Finish When the printer sharing configuration has been completed the shared printer appears in the Printers and Faxes window Printers and Fares Fis p eee Fgeiet Tek H Eh gt e FT Skiners W Printers and Fees Printer Tasks H PUS 100 Series on lt PPC cer Alen 7 Troubleshost printing i Get aie vih printing Now you can print using the shared printer even if your computer is not directly connected to a printer Connecting to the Internet 85 Using Bluetooth Devices Optional Bluetooth is a wireless communication technology that allows access to devices nearby such as a computer mobile phone printer keyboard or mouse without a cable connection Bluetooth enables file transmissions Internet access a private area network function and access to a keyboard mouse and printer between
8. Optional Intel R PRO Wireless 3945ABG Network Connection Product Specification Item Detailed Specifications Physical Width X Height 30 0 x 50 95 mm Specifications operation temperature and Same as system operation humidity Temperature 0 C 70 C Humidity less than 85 Power Specification Power Saving Mode 70 mW Receiving Mode 0 95 W raw Network Compatibility IEEE802 11a IEEE802 11b IEEE802 11g ificati SPecilcallons Operating System Microsoft Windows XP NDIS5 Miniport Driver Media Access Protocol CSMA CA Collision Avoidance with Acknowledgement ACk Security Wired Equivalent Privacy support WEP 64bit 128bit WPA CCX This piece of equipment supports the Wi Fi wireless LAN security standard WPA Wi Fi Protected Access and CCX Cisco Compatible eXtensions To connect to a wireless network consisting of the WPA and CCX certificates or PROSet may be required depending on the network settings For driver update visit www samsung com and for information on the PROSet installation refer to Wireless Network Setup Using the Wireless LAN Setup Program p71 For more information ask your network administrator Radio Specifications RF Band 2 4GHz 5GHz Support Channels Channels allowed per country Device Transceiver Standard Output Power 5 mW Transmission Method 11a mode OFDM 11b mode DSSS 11g mode OFDM Transmission Rate Mbps 11a mode 54 48 36 24 18 12 9 and 6 11b mode 11
9. Pour une distance sup rieure 300m un enregistrement aupr s de I IBPT est requise Pour une utilisation publique a l ext rieur de b timents une licence de I IBPT est requise Pour les enregistrements et licences veuillez contacter I IBPT France For Metropolitan departments 2 400 2 4835 GHz for indoor use 2 400 2 454 GHz channels 1 to 7 for outdoor use For Guadeloupe Martinique St Pierre et Miquelon Mayotte 2 400 2 4835 GHz for indoor and outdoor use For Reunion Guyane 2 400 2 4835 GHz for indoor use 2 420 2 4835 GHz for outdoor use channels 5 to 13 European Telecommunication Information for products fitted with EU approved modems Marking by the symbol indicates compliance of this equipment to the Radio and Telecom Terminal Equipment Directive 1999 5 EC Such marking is indicative that this equipment meets or exceeds the following technical standards CTR 21 Attachment requirements for pan European approval for connection to the analogue Public Switched Telephone Networks PSTNs of TE excluding TE supporting voice telephony services in which network addressing if provided is by means of Dual Tone Multi Frequency DTMF signaling geen Although this equipment can use either loop disconnect pulse or DTMF J tone signaling only the performance of the DTMF signaling is subject to regulatory requirements for correct operation It is therefore strongly recommended that the equipment is
10. S300 Laptop i YOONKY Laptop b YOUR 46D396C16E Laptop Status Ready If the Bluetooth PIN code requested notification window appears on the bottom right taskbar click on the window enter the Bluetooth PIN code and click the OK button i Bluetooth PIN Code Required x Bluetooth device SAMSUNG_X1 is attempting to connect to this computer Click here to proceed with the connection To deny access ignore this prompt Bluetooth PIN Code Request Device Name SAMSUNG_X1 Before a connection can be established this computer and the device above must be paired The Bluetooth pairing procedure creates a secret key that is used in all future connections between these two devices to establish identity and encrypt the data that these devices exchange To create the paired relationship enter the PIN code and click OK Bluetooth PIN Code The Bluetooth PIN Code is a password used for the connection between two Bluetooth devices the user just enter the same PIN Code E g same numbers on both Bluetooth devices to make a connection 4 After a short while the Bluetooth PIN Code required dialog box appears on Computer B enter the code that you have entered in Step 3 above 5 Ifthe FTP File Access Privilege Request window appears on Computer B click on the window If the Select Access Permission window appears click the OK button 6 The file transmission window appears on computer A Drag files
11. To turn off the computer 1 Click the start button Fe on the taskbar 2 Click Turn Off Computer A Log Olt f Turn OFF Computer 6 Users Manual 3 Click Turn Off Turn off computer If the computer has not turned off properly due to a system error press lt Ctrl gt lt Alt gt lt Delete gt When Windows Task Manager dialog box appears click Shut Down gt Turn Off to turn off the computer Your unsaved work may be lost damaged If lt Ctri gt lt Alt gt lt Delete gt keys do not operate either press the power button for more than 4 seconds to turn off the computer Your unsaved work may be lost damaged The next time you turn on your computer a hard disk check will be performed before Windows starts Getting Started 7 Using the Keyboard Your computer has an 88 key keyboard By pressing designated key combinations you can have access to all the key functions of a full sized keyboard The keyboard is supplied according to the corresponding country Refer to the Z keyboard figure for the corresponding country lt United Kingdom gt Function amp Special Purpose Keys ii j i Jl ee Jex es IG E Je fip Ps I E fe ji J g pij ijk i e Ee Home 2 6 A a W T PgUp i Frrr I E Caps Lock A al e a F if is Be i PgDn r TA i El K e ll yey W a Fn Ctrl fy 7 Function Windows Embedded Numeric Keypad Aai Key Screen Brightness and Key Key Volume Adjustment
12. While the computer is connected to the network you can use network services to share files folders and printers network through wired or wireless network connections For details see Connecting Through a Wired LAN on page 64 and see Connecting Through Ki Network services are provided for the computers that are connected to the a Wireless LAN Optional on page 66 Sharing files or folders This section describes how to share files and folders between computers connected to the network To share files complete the following procedures Step 1 Configuring the sharing of files and folders on a computer Step 2 Accessing shared files and folders from another computer b When a file or folder is shared anyone connected to the network can open and delete the shared file or folder Configure a file sharing network only when the network is secure and do not share important data Connecting to the Internet 81 Step 1 Configuring Sharing 1 Right click the target file or folder to share in My Computer and select Sharing and Security fe Ce View Favertes Toos hep Go J aah j Folders c ee Local Deck C LI Documents and Settings LJ Testers Docunernts Sy My Neterork Places a Recyce On 2 Click IF you understand the security risks but want to share files without running the wizard click here It has the same security effect as that of the Network Setup Wizar
13. gt Or lt gt gt lt F5 gt lt F6 gt lt F9 gt lt F10 gt lt Enter gt Function Displays the General Help window Exits the current menu Moves the cursor up and down between fields Selects different menus Pressing the lt Esc gt key at the Main menu brings you to the Exit menu Scrolls backwards through the options for the highlighted field Scrolls forward through the options for the highlighted field Sets the parameters for the current menu to their default values Save changes and exit system setup Executes commands or opens a submenu Customizing Your Computer 95 Changing Booting Priority You can select the booting priority among the devices such as the hard drive CD ROM drive etc The following example describes how to configure the hard drive as the first booting device when the CD ROM drive is configured as the first booting device by default 1 Select the Boot menu in System Setup Press lt Enter gt on Boot Device Priority item 3 Use lt gt key to move to the Hard Drive item and press lt F6 gt until it is at the very top 4 Press lt F10 gt to save the changed configuration and exit System Setup Now you can boot the system with the hard disk drive as the first booting device 96 Users Manual Configuring the Password Setting the Supervisor Password By configuring a supervisor password you can restrict system access to authorized users only Do not lose or forget y
14. oe a SS B Select the Windows Media Player and click OK The video starts playing 26 Users Manual Above procedure applies only to the video CDs that has a dat file as the execution file Playing procedure may be different according to video CDs To write data on a CD Optional If your computer has CD RW functionality you can copy data to a blank CD or create an audio CD You cannot write to a CD that already has data in it 1 Insert a blank CD into the CD drive On the CD Drive dialog select Open Writable CD Folder and click OK The CD drive window appears 3 Click Start gt My Computer 4 In My Computer window select files and folders to copy then drag and drop them onto the CD drive window My Computer window E dy Docements De Got ew Foote Jook ebp D O p ah totes TF asst C eee sare r y Daa file mul hoeber Tak CD drive window GI Mabe riper fodder GD Publish this fobder to bPa eid il Sire thet hki File Edit View Favorites Tools Help ra gt Mirr Pim ra y us a Sea A peer Address orn i l C My Deiuments T Tikai Docu N p My Conte CD Writing Tasks A 5 _ E My Nebak Paces F Write these files to CD gt G Delete temporary files File and Folder Tasks 4 Folders Ez v Go Norton Antivirus X _ Files Ready to Re Written to the CD 4 Drag and drop folders or files to copy 5 Make a new folde
15. office network Wireless Net Status Change Windows Ls Connected Repair Firewall settings TL tp Agere Wirele f Disable this network Bridge Connections device Create Shortcut Repair this connection ci Rename this connection view status of this connection Properties Change settings of this connection Rename 64 Users Manual 6 On the General tab select Internet Protocol TCP IP and click Properties 4 Local Area Connection Properties General Authentication Advanced Connect using ES OOK This connection uses the following items v El Client for Microsoft Networks v A File and Printer Sharing for Microsoft Networks DoS Pacleat al W gt dule v Internet Protocol TCP IP Install C _ Properties D Description Transmission Control Protocol lnternet Protocol The default wide area network protocol that provides communication across diverse interconnected networks C Show icon in notification area when connected 7 Touse DHCP On the General tab select Obtain an IP address automatically and Obtain DNS server address automatically Click OK To use a static IP On the General tab select Use the following IP address and fill in the IP address Subnet mask Default gateway Preferred DNS server and Alternative DNS server fields Click OK To use both DHCP and static IP simultaneously On the Alternate Configur
16. 1 Configuring Printer Sharing 1 From the computer connected to the printer click Start gt Printers and Faxes 2 Right click the printer you want to share and click Sharing gt Printers and Faxes mE File Edit Yiew Favorites Tools Help D E Peah gt gt Folders Fz Printers and Faxes Printer Tasks 5 Add a printer See what s printing Select printing preferences amp Pause printing Printing Preferences amp Share this printer Open Pause Printing mp Rename this printer X Delete this printer SH Set printer properties Other Places Create Shortcut Delete G Control Panel Rename 3 Scanners and Cameras My Documents A My Pictures P My Computer Properties Details 3 Select Share this printer enter a share name for the shared printer and click OK 4 Inthe Printers and Faxes window you will find the printer icon has been changed to another icon on a hand Samsung MIC 1310 Series 84 Users Manual Step 2 Adding and Using a Shared Printer 1 From a different computer that wants to use the shared printer click Start gt Printers and Faxes Click Add a printer In the Add Printer Wizard click Next Select A network printer or a printer attached to another computer and click Next Select Browse for a printer and click Next Select the workgroup or computer select the desired printer and click Next Add Printer Wizard
17. 16 Users Manual Maintaining your LCD brightness settings after turning the system off and on 1 Turn the system on When the Samsung Logo appears press the lt F2 gt key to enter Setup 2 In the Boot menu change the Brightness Mode Control option to User Control 3 Save the settings and exit Setup When using the Battery Manager only the screen brightness set in Customized Mode is maintained To save the battery charge When your computer is operating on battery power adjusting the LCD brightness level to dimmer diminishes the battery power consumption Bad pixels in the LCD The limits of the LCD manufacturing technology allow a maximum of 10 abnormal or bad pixels which do not affect system performance This system may have the same level of abnormal or bad pixels as any other company s products Maintenance Instructions When cleaning the LCD panel use only computer specific cleaners on a soft cloth and lightly wipe in one direction Adjusting the Volume To adjust using keyboard Press lt Fn gt lt dv gt or lt Fn gt lt da gt from the keyboard Adjusting the Volume using the Volume Control Button Adjust the volume by using the Volume Control Button eo ee To adjust using volume adjustment program Click the Volume icon on the taskbar and move the Volume slider to a desired level Volume For advanced volume control options double click the Volume icon and adjust the
18. 20cm from the antenna at all times This device can not be colocated with another transmitter and transmitting antenna x Users Manual FCC Part 68 This equipment compiles with part of the FCC rules On the back of this equipment is a label that contains among other information the FCC registration number and ringer equivalence number REN for this equipment If requested this information must be provided to the telephone company This equipment uses the following USOC jacks RJ11C An FCC compliant telephone cord and modular plug is provided with this equipment This equipment is designed to be connected to the telephone network or promises wiring using a compatible modular jack which is Part 68 compliant See Installation Instructions for details The REN is used to determine the quantity of devices which may be connected to telephone line Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call In most but not all areas the sum of RENs should not exceed five 5 0 To be certain of the number of devices that may be connected to a line as determined by total RENs contact the local telephone company to determine the maximum REN for the calling area If the terminal equipment causes harm to the telephone network the Telephone Company will notify you in advance that temporary discontinuance of service may be required But if advance notice is not practical the telephone compa
19. 5 5 2 and 1 11g mode 54 48 36 24 18 12 9 and 6 Antenna Type Internal Antenna 2 EA Main Aux The transmission rate may differ from the actual transmission rate 11a mode is supported only when the device is connected with an IEEE802 11a device e g IEEE802 11a compatible Access Point 11g mode is supported only when you are connected to an IEEE 802 11g device e g An Access Point supporting IEEE 802 119 154 Users Manual Abbreviations ee ree Amperes Ore Alternating current ACPI Advanced Configuration and Power management Interface APM Advanced Power Management ATA AT attachment refers to the hard drive interface in an AT compatible computer ATAPI AT attachment packet interface BBS Bulletin board system BIOS Basic input output system C4698 5000 Centigrade o eee Compact disc CD ROM Compact disc read only memory cm Centimeters COM Communication as in communication port CMOS Complementary metal oxide semiconductor Cee Direct current DMA Direct memory access DPMS Display power management signaling DRAM Dynamic random access memory DSTN Double layer super twist nematic ECP Extended capabilities port EPP Enhanced parallel port ee eee gram Si bes oh 56 Gravity GB Gigabytes hr hour TAD tide eee Hertz IDE Integrated drive electronics VO
20. Direction Keys that on a desktop computer s keyboard the keyboard feels like a full sized Although the layout of the keys on your computer s keyboard is different from Z keyboard when you use it 8 Users Manual lt United States gt Function amp Special Purpose Keys SC f F3 if Hf Prt Sc Pause Insert ff Delete D Help c eo a rer E Sys Rq Break J VU VU VU l VU l l EEE acai aaa py l Shift K X th Fn I Ctrl i fe Alt Function Windows Embedded Numeric Keypad Application Key Screen B
21. IEC 825 The laser devices in these components are classified as Class 1 Laser Products under a US Department of Health and Human Services DHHS Radiation Performance Standard Should the unit ever need servicing contact an authorized service location E Laser Safety Note FX Use of controls or adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure To prevent exposure to laser beams do not try to open the enclosure of a CD or DVD drive S Power Cord Requirements The power cord set wall plug cable and AC adapter plug you received with your computer meets the requirements for use in the country where you purchased your equipment iv Users Manual Power cord sets for use in other countries must meet the requirements of the country where you use the computer For more information on power cord set requirements contact your authorized dealer reseller or service provider General Requirements The requirements listed below are applicable to all countries The length of the power cord set must be at least 6 00 feet 1 8m and a maximum of 9 75 feet 3 0m All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be used The power cord set must have a minimum current capacity of 7 A anda nominal voltage rating of 125 or 250 volts AC as required by each count
22. Image File 5 creatureds 2005 11 16 E Creatureds 2005 11 16 E Creatured 2005 11 16 creatureos 2005 21 16 Creaturedg 2005 11 16 ira 3 The selected image is zoomed in on ether r pina pet a aapon lr Creaturedl BS Ga 60 Users Manual Click on the SlideShow or Full Screen button below the zoomed in image To return to the previous status in SlideShow or Full Screen press the lt Esc gt key or double click on the screen In AVStation now press the lt Esc gt key or double click and click Back 7 To view an image in Full Sreen or through a SlideShow MOVIE Station The procedures to play a video movie file or DVD VCD title are described below Playing a Movie File The procedures to play a video file registered to the MOVIE Library are described below Refer to p53 1 Launch AVStation now and click the Movie 2 Click on All Movies and double click a movie file in the right pane The movie file is played TS MOVIE an movies gt iy Computer 4 This only appears in My Comput AVStation now You can manually find and play BE Mymovie2 2005 11 16 files on My Computer or E myMovies 2005 11 16 3 the multi card slot E All movies movie File 2 All Movies i il MyMorkel 2005 11 16 Lic Showing the Play Control window 7 Press the space bar or move the mouse pointer The Play Control window appears at the bottom Using the Computer 61 Playing a DVD 1 Launch AVStation now
23. Professional edition an additional window that requires the computer name and the administrator password appears Enter the computer name and the administrator password and click Next 9 When the Date and Time Settings window appears click Next Setup will continue 10 When the system restarts to display Press any key to boot from CD do not press any key When you see the Windows desktop this means that the installation process is completed Remove the system recovery CD and install the device drivers and applications from the system software Media Troubleshooting 151 If You Cannot Run Windows If you cannot run Windows you have to boot the system with the system recovery CD and reinstall Windows If you boot the system from the system recovery CD you can install Windows only with the user installation option You cannot install with the standard installation option 1 Insert the system recovery CD into the CD ROM drive and start the computer 2 If the following message appears on the screen press any key from the keyboard message does not appear configure the CD drive as the first booting device This message appears only when the CD drive has booting priority If the Z referring to Changing Booting Priority on page 96 3 Do not press any key at this time After a while the partition configuration screen appears To not change the partition press lt Enter gt 4 Select the desired file system format
24. Supported To insert and use a memory card Remove the Slot Protector first before using the Multi Card Slot Press the end b of the Slot Protector lightly and remove the Slot Protector when it pops up downwards Inserting wrong side up may cause damage in the memory card and the You should insert the memory card with the writing on the card facing computer 32 Users Manual 1 Insert a memory card into the Multi Card Slot 2 Click Start gt My Computer The inserted memory card is displayed Memory Stick E 4 Example Memory Stick 3 You can write data to the memory card If the memory card is not formatted yet format the memory card before use Since the memory card may be easily mislaid when moving your computer v keep the memory card separately To remove a memory card 1 Press the end of the memory card softly to pop it outward 2 Ifthe card pops out with a clicking sound remove the card from the system Using the Computer 33 To format a memory card You can use a memory card after the format operation The procedures to format a memory card are described below Since format operation deletes all data in the memory card please make sure that there is no important data in the memory card before formatting b To protect the data in the memory card Set the write protection tab of the Memory Stick or SD memory card to the Lock position Click Start gt My computer Press the right
25. System Software Media Standard Installation is recommended 2 The system is scanned to display the drivers and programs that need to be installed 3 Click OK The drivers and programs are automatically installed as factory defaults 2mSU SSVSTEM SOFTWARE MEDIA com What is SYSTEM SOFTWARE MEDIA Standard Installation SYSTEM SOF T EE x ed by Samsung Computers to enable the eas in case of a system crash F D Start Standard Installation The required s A h Minimum Press Standart um Installation and continue Custom Installation 4 When done restart the system 148 Users Manual Reinstalling Windows XP If the Windows XP does not operate properly due to an error in the system or if you have replaced the hard disk drive you can reinstall Windows XP using the system recovery CD With the system recovery CD you can reinstall Windows XP only To return the system to the state of shipment reinstall the device drivers and programs with the system software Media after reinstalling Windows XP with the system recovery CD Reinstalling Window may delete the data on the hard disk drive such as files programs etc In order to minimize damage from data loss please remember to always back up data Samsung Electronics is not liable in the case of data loss please consult your warranty statement for clarification When you have set a booting password You are asked to enter your booting password afte
26. The edited image is saved 48 Users Manual Adding Images to the Library The PHOTO Library is a library holding image files to be used by PHOTO Station The procedures to add image files saved on the computer to the Library are described below You can add files add folders or search and add files As an example the procedures to add folders are described below 1 Click the Register a File f button below the Library and click on Add by Folders 2 Select a folder which includes image files and click the OK button The image files in the folder are added to the Library 7 The image files used in AVStation are automatically added to the Library Using the Computer 49 MOVIE Station Launch AVStation premium and click on MOVIE on the Station Bar Ead AN Stalin orani MOVIE Menu Bar Station Bar MOVIE Library Register a File Video Play window AVStation premium Play Control Buttons Volume Control EDS Setting Button p42 EDI Setting Button Capture Button What is EDI Enhanced Digital Image Fi EDI Enhanced Digital Image is a visual quality enhancement technology developed by Samsung Electronics You can view a clearer and sharper picture by enabling the EDI function when watching TV or playing a video on AVStation premium However some TV tuners and graphics cards are not supported by EDI For information on EDS Enhanced Digital Sound refer to p42 Playing a DVD
27. a network key IF you want to connect to this Related Tasks network click Connect i Learn about wireless networking Change the order of preferred networks Change advanced settings Q comeet J 70 Users Manual 3 Enter a cryptographic key in the network key box and click Connect Wireless Network Connection The network samsung requires a network key also called a WEP key or WPA key A network key helps prevent unknown intruders from connecting to this network Type the key and then click Connect Network key Confirm network key CC comet J J cont If the network key is not configured in Connecting to computer to computer networks peer to peer or ad hoc on page 68 just click Connect without any keystrokes When connected to the wireless network the system displays Connected in the selected network of the Network Connection window Checking the connection status Move the mouse pointer over the Wireless Network Connection mu icon on the taskbar and the connection status is displayed Wireless Network Connection WES Speed 11 0 Mbps Signal Strength Excellent Status Connected Wireless Network Setup Using the Wireless LAN Setup Program The procedures to connect to an access point using a wireless LAN configuration program are described Since the wireless LAN configuration program is included in the system software media the user has to install the program
28. and insert a DVD title into the DVD drive 2 Inthe AVStation now start screen click on Movie 3 Click on DVD VCD and double click on the DVD title The DVD title is played MS MOVIE pvp veo My Computer All Movies at it Ws Actresses 62 Users Manual Connecting to the Internet Connecting with a Modem Before You Start e Use a standard non digital phone line to connect Contact an internet service provider ISP for instructions on how to connect to and disconnect from the Internet 1 Connect a telephone line to the computer s modem port 2 Connect to the Internet according to the instructions provided by your ISP If the Internet connection is not disconnected properly additional telephone 2 charges may be imposed Connecting to the Internet 63 Connecting Through a Wired LAN 1 Connect a LAN cable to the computer s LAN port Click Start gt Control Panel Click Network and Internet Connections in the Control Panel window Click Network Connections in the Network and Internet Connections window n WwW N Right click the Local Area Connection icon and click Properties s Network Connections DER File Edit view Favorites Tools Advanced Help Q sec v gt E P Search j Folders E e Network Connections A LAN or High Speed Internet Network Tasks ocal Area Connection fs Create a new Connected Firewalled connection roadcom 4 i Set up a home or small 2 Disable
29. and search desired items from the computer or Internet by clicking Search samsuna 7 Internet Internet Explorer wa E mail 3 Outlook Ex press I MSN Windows Media Player 33 Windows Messenger Tour Windows XP Files and Settings Transfer Wizard Frequently used programs All P rog rams All Programs gt Start Button My Computer Control Panel Help and Support amp Search p Run 4 CI My Documents 4 2 My Recent Documents gt A r CI My Pictures 2 My Music 43 My Computer ee Control Panel Set Program Access and Defaults My Computer Control Panel a Printers and Faxes Help and Support pP Search I Run Help and Support Log Off Turn Off Computer Displays the contents of the hard disk the CD ROM drive the network drive s and floppy disks It can also be used to search and open files and folders Enables users to configure settings on the computer Provides on line help information on Windows and troubleshooting Enables users to search for information in files or the Internet Run programs or documents Introducing Windows 21 Understanding a Window A window is the basic component in working with the computer The My Computer window which is a window for the computer s hard drive will be used as an example here to show the basic composition of a window Click Start gt My Computer Folder Icon Ee
30. connection device Choose Device ired Broadcom 440x 10 Select Device l Get IP Automatically IP Address Gateway Setup IP Address SubNetMask DNS Server Back next _ Cancel Select Device Select a device to be connected to the Internet Select either Wired LAN or Wireless LAN 74 Users Manual Setting up the IP Address To allocate an IP address automatically DHCP select Get IP Automatically To use a Static IP address unselect Get IP Automatically and enter an IP address For IP address information ask your network administrator 7 When the Printer Setting window appears click Finish To add a printer click Add Printer The Add Printer Wizard appears Set up the printer according to the instructions displayed on the screen When the printer has been added click the Show printer button select the newly added printer and then click the Finish button To not add a printer select No Default Printer and then click the Finish button When the network setting is complete the Do you want to move to newly added location now message appears If you select Yes the network settings for the added location are applied When the network settings for the added location are applied the added place and the corresponding network connection information is displayed in The detailed Information for window When the network setting is complete an icon for the added location is created within the Sav
31. device to bring the computer out of standby then click OK Restart the system If the system in rest mode is activated when there is no received signal use the system after disabling lt Wake On LAN gt function If you turn the power off when lt Wake On LAN is disabled the LAN LED may continue to be lit up Connecting wired LAN while using wireless LAN may not execute lt Wake On LAN gt function Configure wireless LAN to Disable to use lt Wake On LAN gt function 1 Click on My Network Place gt View network connections on the Desktop 2 Right click over Wireless Network Connection and select Disable When I connected 100Mbps wired LAN and the computer exits standby hibernate mode a message informing 10Mbps wired LAN connection appears When the computer exits standby hibernate mode restoring the network takes about 3 seconds When the network is restored it operates in 1OOMbps Troubleshooting 129 Wireless LAN Related Q1 Al A2 A3 A4 Q2 Al A2 A3 130 Users Manual The Wireless LAN device is operating properly but I cannot connect to the Internet or to another computer This is due to an incorrect configuration or a configuration error Check the following check lists If you are using a computer to computer Ad Hoc network connection check that the name of the configured network SSID is correct The network name SSID is case sensitive If you are using a netwo
32. is a collection of additional Windows functions that are useful for system management Offering shortcut descriptions of Windows configuring network sharing and opening local folder sharing etc Using the Computer 37 Using EasyBox The Security management function will be used as an example here to show the function of Easybox Configuring Firewall The Windows Firewall prevents unauthorized users from gaining access to your system via the network or the Internet Click Start gt All Programs gt Samsung gt EasyBox gt EasyBox Click Security from the top menu bar Select Windows Firewall Settings from the Security menu on the left Select a firewall level Click Apply aC SS P E E a nel E p c F pg EAS YHOe di oystam is DESKTOP SECURIT E indies Firewall Semen a whee rad Windies Finn otes unOiRid nhau bate fen the nite CE thal fhe computer is connected to ETL i dn mt D f LELNI Protection Lire ED High Firewall on with mo exceptions Morel Firewall on with emcepians E Leva Pineal of Click the User Setting button for advanced features including exceptions and permissions 38 Users Manual Using Samsung Update Plus Samsung Update Plus is software that examines and updates Samsung software and drivers installed on your Samsung computer to the latest version To use Samsung Update Plus your computer has to be connected to the Internet To Update Samsung Software and Drivers 1
33. network key encryption key manually Check the AP settings as follows The following is recommended for a standard environment and thus may differ according to the specific wireless network environment When several APs are present simultaneously check the channel setting for each AP When different APs are using nearby channels interference may occur between electronic waves Set the APs channels further apart from each other Ex Ch1 Ch5 Ch9 Ch13 When an AP s SSID Service Set ID option is set to Hide you cannot search for that AP on the computer We recommend canceling the Hide option for an AP The SSID is a name for distinguishing one wireless LAN from another wireless LAN It is recommended using Long Preamble Preamble is a signal for data transmission synchronization Short Preamble may be supported by some types of APs but may cause compatibility problems It is recommended using a static IP Since static channel selection is more reliable than auto channel selection it is recommended setting a static channel Q5 Al A2 A3 A4 A5 Q6 Al In the Windows XP Available wireless networks window the Wireless Network Connection is displayed as Not Available Check if the wireless LAN is turned on Check if there is additional program for a wireless LAN connection installed Windows XP supports wireless LAN connections through the Wireless Zero Configuration WZC service Therefo
34. occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Regulatory Compliance Statements ix If necessary the user should consult the dealer or an experienced radio television technician for additional suggestions The user may find the following booklet helpful Something About Interference This is available at FCC local regional offices Our company is not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by our company The correction will be the responsibility of the user Use only shielded data cables with this system Intentional emitter per FCC Part 15 Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4 GHz Band may be present embedded in your notebook system This section is only applicable if these devices are p
35. on battery power or using AC power Standby vs Hibernation v Hibernation is a state where the contents of memory are stored in a special file on the hard disk and Standby simply keeps a small holding current through the memory to keep the data You are more likely to sustain loss of data in Standby mode so it is recommended to save all open files before entering Standby Changing Devices b Do not change PC Cards while in standby or hibernate modes To enter the power management window complete the following 1 Click Start gt Control Panel gt Performance and Maintenance 2 Click pal icon to display the Power Options Properties window System Management 103 3 Click the Power Schemes tab to display the basic power management options Power Options Properties Power Schemes Alarms Power Meter Advanced Hibernate this computer Note that changing the settings below will modify lt 3 Select the power scheme with the most appropriate settings for the selected scheme Power schemes Battery gr Normal v Settings for BatteryMar Normal power scheme When computer is Plugged in Running on batteries Turn off monitor After 15 mins x After 15 mins Turn off hard disks Never v After 10 mins System standby Never After 15 mins System hibernates Never After 25 mins By default the power scheme is configured to BatteryMgr normal mode BatteryMgr normal mode extends t
36. or folders to send onto the window and the files or folders are automatically transmitted My Bluetooth Places Entire Bluetooth Neighborhood SAMSUNG_X1 File Transfer EBX File Edit View Bluetooth Favorites Tools Help ae O Bak J wi P Search Key Folders X Address My Bluetooth Places Entire Bluetooth Neighborhood SAMSUNG_X1 File Go Norton Antivirus C z Bluetooth Tasks a O Make a new folder Bluetooth eps Other Places My Documents O Bluetooth Exchange Folder My Bluetooth Places 7 Ifthe file transmission is complete close the File Transmission window The received files are saved in the C Documents and Settings user name My Documents Bluetooth Exchange folder Connecting to the Internet 91 Connecting Keyboard Mouse Joystick and Headset devices The procedures to use Bluetooth HID devices keyboard mouse joystick etc or a headset etc on the computer are described below The Bluetooth PIN Code is a password used for the connection between two Bluetooth devices the user just enter the same PIN Code on both Bluetooth devices to make a connection 1 Turn on the Bluetooth function on the device to connect to mouse keyboard joystick or headset Some devices have a button to turn on the Bluetooth function so refer to the corresponding device manual 2 Double click on the My Bluetooth Settings icon on the Desktop MaDe Coot aces 3 Ifthe My Bluetooth Settings window appe
37. restrictions on the use of wireless devices Since your system is equipped with a wireless device when traveling between countries with your system check with the local Radio Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the destination country If your system came equipped with an internal embedded wireless device do not operate the wireless device unless all covers and shields are in place and the system is fully assembled Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Please contact manufacturer for service Only use drivers approved for the country in which the device will be used See the manufacturer System Restoration Kit or contact manufacturer Technical Support for additional information Regulatory Compliance Statements vii United States of America USA and Canada Safety Requirements and Notices Do not touch or move antenna while the unit is transmitting or receiving Do not hold any component containing the radio such that the antenna is very close or touching any exposed parts of the body especially the face or eyes while transmitting Do not operate the radio or attempt to transmit data unless the antenna is connected if not the radio may be damaged Use in specific environments The use of wireless devices in hazardous locations is limited by the constrain
38. system is designed and tested to meet the latest standards for safety of information technology equipment However to ensure safe use of this product it is important that the safety instructions marked on the product and in the documentation are followed Always follow these instructions to help guard against personal injury and damage to your system Setting Up your System ii Users Manual Read and follow all instructions marked on the product and in the documentation before you operate your system Retain all safety and operating instructions for future use Do not use this product near water or a heat source such as a radiator Set up the system on a stable work surface The product should be operated only with the type of power source indicated on the rating label Ensure that the electrical outlet you are using to power your equipment is easily accessible in case of fire or short circuit If your computer has a voltage selector switch make sure that the switch is in the proper position for your area Openings in the computer case are provided for ventilation Do not block or cover these openings Make sure you provide adequate space at least 6 inches 15 cm around the system for ventilation when you set up your work area Never insert objects of any kind into the computer ventilation openings Ensure that the fan vents on the bottom of the casing are clear at all times Do not place the computer on a soft surface doin
39. the Internet from the sharing client by connecting to the sharing server Connection 1 Connection 2 Connection 3 Sharing Server A computer with a direct connection to the internet and a local network connection Sharing Client A computer that uses the Internet by connecting to a sharing server without itself having a direct connection to the Internet You can connect a sharing server and a sharing client as follows See Figure 5 on page p74 Sharing Server Sharing Client External Internet Device Client Device Wired LAN Wireless LAN Connect a sharing client with the Wireless LAN Wired LAN device that is the same as the Wired LAN Wired LAN client device of the sharing server For Connection 3 you have to connect a LAN card in advance To connect a sharing server and a sharing client using a wired LAN connect the computers with a crossover LAN cable or network hub first To use a wireless LAN press the lt Fn gt and lt F8 gt key combination simultaneously to enable a wireless LAN When the wireless LAN is turned on the Wireless LAN Operation LED e lights up i As an example Internet sharing procedures for Connection 1 which connect the sharing server and the Internet through a wired LAN and connect the sharing server and the sharing client through a wireless LAN are described below Connecting to the Internet 77 Setting Up a Sharing Server 1 Run Samsung Network Manager on the computer to be used as
40. the popup windows when connected to the Internet Click on Internet Options in Start gt Control Panel gt Security Center gt Manage security settings for In the Privacy tab of Internet Properties clear Block pop ups To display popup windows only from the current site when connected to the Internet Place the cursor on the notification area at the bottom of the Internet address bar and right click to display a menu from which you can select Temporarily Allow Pop ups or Always Allow Pop ups from This Site To display popup windows from a particular site Click on Internet Options in Start gt Control Panel gt Security Center gt Manage security settings for In the Privacy tab of Internet Properties click on Settings from Block pop ups Enter a URL to want to allow pop ups into Address of Web site to allow and click on Add You will find that the entered address is added to the allowed sites list The next time you connect to the Web site you will see pop ups appearing When you need to re block a permitted site select the Web site address that you want to block from the Allowed Sites and click on Remove When you connect to a Web site you see the message To help protect your security Internet Explorer stopped this site from installing an ActiveX control on your computer or This site might require the following ActiveX control below the address bar Windows XP SP2 blocks unsigned ActiveX controls f
41. the sharing server 2 Click the Add button 3 Select a network location icon and enter the name of the location e g Home Click the Next button 4 Select Internet direct Connection for sharing and click the Next button 5 Set up the network device to be connected to the external Internet Determine whether to use a firewall and select a network device to be connected to the external Internet e g Wired LAN Set the IP address and then click the Next button Add Location 3 Choose Device to connect Internet directly Please enter IP address after choosing connection device Determine whether W Enable Firewall You can t use some of online game Aci aa a a a a emes to use a firewall Choose Device Wired Broadcom 440 10 100 Integrated Controller Select a device W Get IP Automatically IF Address Gateway Saran iP ddarecs SubNethask DNS Server Internet Direct Connection Sharing To protect against external intrusion attempts using a firewall is recommended For more information on selecting a device and setting the IP address refer to the description of item 6 of Setting Up a Network on page 73 6 Select a network device to connect to the sharing client e g wireless LAN and click the Next button 78 Users Manual In the Select Device field select Wireless To Share Internet Access through a Wireless LAN 7 8 In the Wireless Connection Name e g Samsung field ent
42. to Programs and Services click on Add Program and select it Set up Windows Automatic Updates This automatically downloads and installs critical updates via the Internet to keep your computer up to date Click on Automatic Updates in Start gt Control Panel gt Security Center gt Manage security settings for From general tab of Automatic Updates window select Automatic recommended Keep your computer current with the latest virus updates ex Norton Antivirus Even when you have installed Norton AntiVirus on your computer Windows cannot recognize the program until you configure the settings displaying a Security Alert icon When you first use or install Norton AntiVirus for the first time follow the Registration Wizard steps to configure the registration settings To protect your computer from virus attacks with the latest updates click on Options to display the Norton AntiVirus Options window From the left menu of the window check Run Automatic Protection to select Automatic Protection and check Run LiveUpdate to select LiveUpdate Two virus scanning programs on one computer may cause system conflicts Remove one of the programs from the system A5 Z If Windows does not recognize the existence of an anti virus program even when it has been installed your computer could be vulnerable to attacks from the Internet You should install an anti virus program that your computer is able to identify Check the follow
43. to connect to a wireless network in range or to get more information 2 Set up a wireless network Test for a home or small office amp Security enabled wireless network WPA alll Related Tasks Q Testi A Learn about wireless tf Security enabled wireless network WPA antl networking gfe Change the order of preferred networks pe Change advanced settings On the Wireless Network tab click Advanced Clear Automatically connect to non default network check box if it is selected Select Computer to computer ad hoc networks only and click Close In the Wireless Networks tab click Add Enter the network name e g samsung and unselect The key is provided for me automatically Enter the encryption key in the Network key field and click OK Wireless network properties Association Authentication Connection Network name SSID Wireless network key This network requires a key for the following Network Authentication Open Data encryption WE P Network key Confirm network key Key index advanced l1 he key is provided for me automatically Tox ETE To prevent a network connection from an unauthorized user it would be better to configure a network key encryption key A network key consists of 5 13 alphanumeric characters e g magic or of 10 26 hexadecimal numbers a hexadecimal number is represented by nu
44. 02 11b 802 11g wireless LAN devices may not yet be harmonized in all countries 802 11b 802 11g products are designed for use only in specific countries or regions and are not allowed to be operated in countries or regions other than those of designated use b As a user of these products you are responsible for ensuring that the products are used only in the countries or regions for which they were intended and for verifying that they are configured with the correct selection of frequency and channel for the country or region of use Any deviation from permissible settings and restrictions in the country or region of use could be an infringement of local law and may be punished as such The European variant is intended for use throughout the European Economic Area However authorization for use is further restricted in particular countries or regions within countries as follows General European standards dictate maximum radiated transmit power of 100 mW effective isotropic radiated power EIRP and the frequency range 2400 2483 5 MHz Belgium xvi Users Manual The product may be used outdoors but for outdoor transmissions over a distance of 300m or more a license from the BIPT is required This restriction should be indicated in the manual as follows Dans le cas d une utilisation priv e a l ext rieur d un b timent au dessus d un espace public aucun enregistrement n est n cessaire pour une distance de moins de 300m
45. 1 Insert the system software media into the CD drive and install the wireless LAN configuration program PROSet Select System Software Media gt User Installation gt Wireless LAN Driver ReadMe click ReadMe and install according to the instructions 2 Double click on the wireless LAN program FR icon on the taskbar Alternatively click Start gt All Programs gt Intel PROSet Wireless gt Intel PROSet Wireless Connecting to the Internet 71 3 In Available Networks click on Refresh 4 Select the name of an access point to connect to from the available network list and click on Connect If a network does not appear click on Refresh 5 Enter a WEP key and click the OK button settings of the AP Click the Advanced button to set up network authentication data encryption etc For more security setting information ask your wireless network administrator The Wireless Security Settings window may differ depending on the security Refer to setting up the advanced settings by clicking on the Advanced button Network authentication The network authentication options include an Open System and Shared Key When selecting Open Systems no authentication is applied however encryption is supported When selecting Shared Key a WEP key is used for authentication The default setting is Open System Data encryption WEP The IEEE 802 11 WEP Wired Equivalent Privacy standard defines two levels of encryption a 64 b
46. A direct memory access A method of transferring data from a device to memory without having the data pass through the microprocessor Using DMA can speed up system performance DPMS Display Power Management Signalling Displays or monitors that comply with this can be managed by the Power Management features found in the system setup Floppy disk A removable disk also called floppy or diskette 158 Users Manual Hard drive Also called fixed disk A hard drive is connected to the computer and can be installed or removed Data written to a hard drive remains until it is overwritten or corrupted The 2 5 inch hard drive in your computer was designed for use in a notebook computer Because hard drives in notebook computers are smaller than those in desktop computers their maximum storage capacity may be less than that of desktop hard drives However because of their smaller size the drives handle shock and vibration better than larger drives which is important for a notebook computer T O Input output Refers to peripheral devices such as printers that are addressed through an I O address I O address I O stands for input output Peripheral devices such as printers are addressed through the I O port address IRQ interrupt request line The IRQ is a hardware line that a device uses to signal the microprocessor when the device needs the microprocessor s services The number of IRQs is limited by industry standards LCD liquid c
47. Confirm New Password field empty and press lt Enter gt to deactivate the password 98 Users Manual Configuring Resolution and Color Depth Screen resolution is the number of pixels displayed on the screen High resolution makes the overall screen area large although individual items appear small Color quality is determined by the number of bits used to represent a pixel on the screen High color quality displays more number of colours on your screen 1 Select Start gt Control Panel gt Appearance and Themes gt Change the screen resolution 2 Make changes on the Settings tab of the Display Properties dialog box Display Properties Themes Desktop Screen Saver Appearance Settings Drag the monitor icons to match the physical arrangement of your monitors You can view the graphics chipset Color quality To change your screen Less T Highest 32 bit a To change the number of resolution move the slider i nimi colors displayed ona to select an appropriate monitor select an resolution appropriate colour quality Extend my Windo ktop onto this monitor ows deskto 3 When you have completed configuration click Apply The following resolution and color quality settings are recommended depending on the LCD screen of the system WXGA 17 Screen resolution 1440 x 900 Color quality Very high 32bit WSXGA 17 Screen resolution 1680 x 1050 Color quality Ver
48. Control Panel gt Performance and Maintenance gt System gt Hardware tab gt Device Manager The wireless LAN connection settings will be described on the basis of the Windows XP Service Pack 2 installed computer It is recommended using the default settings provided by Windows XP for the wireless LAN settings for Windows XP installed computers To setup using the software supplied by the wireless LAN card manufacturer refer to Wireless Network Setup Using the Wireless LAN Setup Program p71 To use the wireless network you have to turn on the wireless LAN function by using the Wireless LAN On Off Button Wireless network connections can be classified into two categories 1 Access Point AP You can connect to an AP to use the network This is possible only in an environment equipped with an AP For details see Connecting to an Access Point AP on page 67 What is an Access Point AP 7 An AP is a network device that bridges wired and wireless LANs and corresponds to a wireless hub in a wired network You can connect multiple wireless LAN installed computers to an AP 66 Users Manual 2 Computer to computer ad hoc This is also called a peer to peer network In computer to computer wireless networks you can wirelessly connect 2 or more computers that have wireless LAN modules For details see Connecting to computer to computer networks peer to peer or ad hoc on page 68 Connecting to an Access P
49. General Icon Note Some of the Icons used in Windows XP may be placed on the taskbar by selecting ex Place the volume icon in the taskbar in the properties dialog box Getting Started Introducing Your Computer Front View Status Indicators p15 LCD Panel Keyboard p8 Power Button Wireless LAN Button AVS Button p54 Etiquette Mode Button Volume Contorl Button Speaker L Speaker R Status Indicators p15 Touchpad Touchpad Button p12 LCD Latch Multi Card Slot 032 Remote Control Sensor Getting Started 3 Right View Headphone Jack S PDIF Jack USB Port 2 0 CD Drive Optional p24 Monitor Port Microphone Jack Line In Jack Left View Fan Vent PC Card Slot p35 LAN Port p64 1394 Port 6 Pin Modem Port p63 USB Port 2 0 4 Users Manual Back View USB Port 2 0 DC Jack Battery TV Output Port Security Lock Port S Video p115 Bottom View Battery Latches Docking Connector Memory Compartment p113 HDD Compartment Cover Removing or disassembling the hard disk drive will void your warranty To replace the hard disk drive please contact your nearest Samsung Service Centre Getting Started 5 Turning the Computer On and Off To turn on the computer 1 Insert the battery and connect the AC adapter according to the Installation Guide 2 Slide the LCD latch to the right and open the LCD panel 3 Press the power button
50. Input output IRQ Interrupt request line Abbreviations 155 ISA Industry Standard Architecture KB Kilobytes Kei 26 45h Kilograms LAN Local area network RETE ETTE Pounds LBA Logical block addressing LCD ea Liquid crystal display Die scuteon Meters mA Milliampere mAhr Milliampere hour MB Megabyte mm millimeter MPEG Motion Picture Experts Group MPU Microprocessor unit MS Millisecond PDF Portable document format ts Oe ere ee Personal computer PCI oaa Peripheral component interconnect PCMCIA Personal Computer Memory Card International Association POST Power on self test PNP Plug and play PS 2 assie Personal System 2 RAM Random access memory ROM Read only memory SVGA Super video graphics array TET oazi Thin film transistor USB Universal serial bus b EEE og aban Volt VAC Voltage alternating current VOC croatia Voltage collector current VDC Voltage direct current whr Watt hour 156 Users Manual Glossary AC adapter The AC or alternating current adapter regulates current coming into your computer from the wall outlet The current at the wall outlet is alternating current and needs to be changed by the adapter to DC direct current before your computer can use it for power ACPI ACPI Advanced Configuration and Power Interface a method for describing hardware
51. Notices No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means mechanical photocopying recording or otherwise without the prior written permission of the manufacturer The information within this manual is subject to change without notice The manufacturer shall not be held liable for technical or editorial errors or omissions contained in herein nor for incidental or consequential damages resulting from the furnishing performance or use of this material Microsoft Windows is a registered trademark of the Microsoft Corporation Product names mentioned herein are for identification purposes only and may be trademarks and or registered trademarks of their respective companies Macrovision Statement If your computer has a DVD drive and an analog TV Out port the following paragraph applies This product incorporates copyright protection technology that is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Copyright 2003 All rights are reserved Notices i Important Safety Information safety Instructions Your
52. S DOS mode of Windows you cannot change the display device by pressing the shortcut key 100 Users Manual Using Dual View to View Extended Screen Dual View is a function that enables you to view a computer screen over two display devices This is convenient when needing a wide screen for work In Dual View mode you can select the screen resolution and colour quality for each display device as if there were two separate graphics cards 1 Connect the external display device e g a monitor or a projector to the corresponding port of the system To connect a TV connect the TV to the TV output port of the system 2 Press touchpad right button on the desktop click Properties and then click the Settings tab 3 Click the monitor 2 icon select the Extend my Windows desktop onto this monitor check box and then click Apply Display Properties Themes Desktop Screen Saver Appearance Settings Drag the monitor icons to match the physical arrangement of your monitors Display XXXXX Screen resolution Color quality Less o Mos Highest 32 bit XXXX DY XXX li ni ma E Use this device as the primary monitor rend my Windows desktop onto this monitor SS 4 When the configuration is complete click Identify on the left side of Troubleshoot The primary display device the LCD is indicated as 1 and the Customizing Your Computer 101 secondary display device is in
53. SODIMM Optional Main Chipset Intel i945PM ICH7M ICH7M DH Optional Hard disk drive HDD 9 5mmH 2 5 HDD Optional 60 120GB CD drive RW Combo DVD Super Multi Optional Graphics NVIDIA Geforce Go 7600 128MB 256MB Optional Sound High Definition Audio Codec AD1986A Network Interface Modem V 92 Wired LAN Broadcom BCM5751 1G Ethernet UTP Optional Wireless LAN 802 11ABG Optional Bluetooth 2 0 EDR Optional Multi Card Slot Memory Stick Memory Stick Pro SD Card MMC xD card Supported Optional PC Card Slot PCMCIA Type and II Compatible Ports IEEE 1394 6 Pin USB 2 0 x 4 Microphone Headphone S PDIF Optional supported Modem Ru 11 LAN RJ 45 Monitor and TV Out S Video DC Jack Security Lock Port 120 Pin Dock Port Dimensions mm 395 x 278 8 x 30 5 34 4 WxDxH LCD 17 WXGA 1440 x 900 17 WSXGA 1680 x 1050 Optional Weight 2 99Kg Battery Lithium lon smart battery 6 Cells or 9 Cells Optional Operation Temperature storage 5 40 C operation 10 32 C Environment Humidity storage 5 90 operation 20 80 Operation Voltage 100 240 VAC Frequency 50 60 Hz Output Power 90W Output Voltage 19 0VDC The system specifications are subject to change without notice For detailed system specifications refer to the product catalog The capacity of the hard disk drive with Samsung Recovery Solution will be displayed as less than the specified capacity Specifications 153 Wireless LAN Specification
54. Select Start gt All Programs gt Samsung gt Samsung Update Plus gt Samsung Update Plus If this is the first time you are running the program a window will appear asking you if you agree to the agreement in the window Click Agree to use this software 2 Click Search for and Install Updates and click the Search for New Updates button Samsung Jpdate Plus db Search and Install Updates B gt parch and Install Updates i Search for New Updates D gt Samsung Update Plus automatically searches downloads and installs the latest versions of pre installed Samsung software and drivers for your system Please click on the Search for Updates button to begin searching gt Configuration for new updates gt View Installed Updates Fp uraeus Un 3 If there are available software or driver updates for your computer the available updates will be listed Select the required updates from the list and click Install Update to start the update The update list on the screen may differ depending on the computer model Using the Computer 39 40 Users Manual Updates that must be installed separately If you select Install as an update item that must be installed separately a message appears informing you of this Follow the instruction message to correctly install it Automatic update items display By default your computer is configured to automatically search for updates If there is
55. The procedures to play a DVD title are described below To play a DVD title DVD playing software e g CyberLink PowerDVD must 1 be installed Install the DVD playing software first 1 Launch AVStation premium and insert a DVD title into the DVD drive 50 Users Manual 2 Inthe What do you want Windows to do window select Play DVD Video using Samsung A VStation and click the OK button PearlKoreaD1_10 28 01 D Windows can perform the same action each time you insert a disk or connect a device with this kind of file DVD movie What do you want Windows to do Play DYD Video using Windows Media Player Play DVD Video eee using PowerDVD JiPlay DYD Video using Samsung AYStation 3 7 gt Open folder to view files using Windows Explorer A C Always do the selected action 3 The DVD title is played Fed AW Stalin Ifa DVD title is already in the DVD drive double click the DVD title in the DVD VCD folder of the Library The DVD title is played Using the Computer 51 Playing a Movie Video File The procedures to play a video file registered to the MOVIE Library are described below For the procedures to register files to the Library refer to p53 1 Move to MOVIE Station and double click All Movies 2 Double click a video file The file is played Fed AVStation pr e Playing a Video File not Registered to the Library Click File gt Open select a video file to b
56. Windows 2 Bluetooth Tray 2 Bluetooth Icon 2 About Bluetooth Services Basic Operations B Start or Stop Bluetooth Configuration Device Icons Service Icons General Basic Operations Applications Configure Bluetooth Security 2 Troubleshooting Hardware Accessibility Discovery Security Troubleshooting Introduction Services Select Start gt Help and Support gt Networking and the Web gt Networking gt Wireless networking gt Bluetooth devices wireless to view Windows Help Connecting to the Internet 89 Exchanging Files between Bluetooth computers The procedures to exchange files and folders between Bluetooth computers are described below 1 3 90 Users Manual On the computer that is sending a file hereafter Computer A right click the Bluetooth icon E3 in the notification area and select Quick Connection gt File Transmission gt Search for Device Business Card Exchange Bluetooth Serial Port Dial up Networking Fax File Transfer PIM Synchronization Bluetooth Setup Wizard Network Access Advanced Configuration Headset Audio Gateway In the Select Device window click on a computer to be connected hereafter Computer B Service File Transfer Select a device from the list below Click the Refresh button to update the list Device Name Device Type 4 Anycall Cellular Phone Anycall Cellular Phone is als Desktop PS SAMSUNG _X Laptop
57. additionally selected services are installed At this point a warning message may appear informing you that there is no Microsoft logo Since it does not affect the operation continue the installation 3 If the driver installation is complete the next step proceeds which searches for nearby Bluetooth devices Since you do not have to search while setting up click the Skip button and finish the settings Initial Bluetooth Configuration Wizard Initial Bluetooth Configuration Wizard lf you have another Bluetooth device and you want to configure the way this computer will use its services click Next Otherwise click Skip 4 When the settings are complete the Bluetooth icon menu of the notification area changes as shown in the figure Se ee Explore My Bluetooth Places Bluetooth Setup Wizard Advanced Configuration ie z 3 Quick Connect Stop the Bluetooth Device 88 Users Manual Using Bluetooth Describes how to exchange files between computers supporting Bluetooth and how to use other Bluetooth devices Bluetooth Help Bluetooth Help provides detailed procedures on using Bluetooth functions Double click on My Bluetooth Settings on the Desktop and press the lt F1 gt key Help E Bluetooth Help ce gt g Hide Beck Fonai Pini Contents Index Search BTW J Introduction P i P 2 Welcome to Bluetooth Bluetooth for Microsoft 2 Bluetooth Setup Wizard
58. alled For setting up a wireless network using the Windows XP program this option should be selected When connecting to a computer to computer Ad Hoc network I cannot connect to another computer connected to the same computer to computer network Make sure that the security settings and network name of the computer to computer Ad Hoc network is correct Troubleshooting 133 A2 Q7 QS Q9 134 Users Manual Check the TCP IP properties of the computers to be connected through the computer to computer Ad Hoc network All of the computers to be connected through a computer to computer Ad Hoc network should be configured so that their IP addresses are within the same subnet range If the TCP IP Settings are configured to DHCP the address is automatically configured to an address within the subnet IP range This will take about 2 3 minutes If the IP address is configured to static IP in TCP IP properties select Use the following IP address in the TCP IP properties of the wireless adapter configure IP address 10 0 0 1 10 0 0 254 and Subnet mask 255 255 0 0 and then try again A fixed IP is recommended for a small size network When using a computer to computer Ad Hoc network sometimes I cannot search the access point It may happen occasionally when you are using a computer to computer Ad Hoc network connection Even if you cannot find some access points the computer to computer Ad Hoc network is op
59. anding of Standby and Hibernate modes 5 Click OK to set your power management options and close the window You can return to normal operation after you have used one of the Power Management buttons by quickly pushing and releasing the Power button System Management 107 Using the Battery Please refer to the following instructions when running the computer on battery power without connecting the AC power b Precautions Use only chargers specified in the User Manual Never heat the battery pack put it near or in a fire or use at a temperature higher than 60 C as this may cause fire Never cause a short circuit between the battery pack terminals or disassemble the battery pack Carefully read and follow the precautions printed on the battery and the safety instructions in the User Manual before using the battery Please refer to the system operation environment p153 of this manual and v Please read the instructions on the battery before use operate and store the battery at room temperature Ejecting and Attaching Battery 1 Shutdown the system and close LCD 2 Put the computer upside down on a flat surface 3 Pull the two battery latches outward f then remove the battery 108 Users Manual 4 To install the battery again slide the battery into the system as below The battery latches move inward and fix the battery automatically Monitoring the Battery Charge You can view the batte
60. anew update available this is notified in the notification area Click the balloon help icon in the notification area Here you will be able to find the latest available updates Samsung Update Plus automatically searches downloads and installs the latest versions of pre installed Samsung software and drivers For your system Please click here to configure and to start using Samsung Update Plus To change the automatic update settings click the Configuration button in Figure 2 and change the settings Samsung Update Plus does not provide updates for additionally installed software and device drivers Using AVStation premium AVStation premium is an integrated multimedia program that enables users to enjoy music photographs video movies etc all with a single program model e The screens used in this manual may differ from actual screens according to the program version e TV Station is only available for systems supporting the TV function e For detailed usage refer to the program help Before You Start Z e AVStation premium is optional and may not be provided depending on the Start and Screen Layout To launch the program select Start gt All Programs gt Samsung gt AVStation premium gt AVStation premium Alternatively double click the AVStation premium icon AY on the Desktop Station Bar Menu Bar Library Exit Press the Exit button to exit the program MUSIC You can play a m
61. anual Step 3 Enable S PDIF output on the DVD program To use 5 1 channel speakers you need to install the CyberLink Power DVD program from the CyberLink DVD Solution Installation CD or System software Media provided with your computer then change the settings as per the following The CyberLink PowerDVD program is optional and may not be provided depending on the model 1 Run CyberLink Power DVD program and click the Configuration icon F4 TITLE CH YIDEG og og o o0 00 kag Configuration Parental Control Information pi Mobile Power Settings Player Skin Video Audio Output Mode PowerDVD l x a Now you can enjoy home theater using DVD titles To control volume for your 5 1 channel speaker use the control on the digital 7 amp Please refer to the speaker manual Using the Computer 31 Using the Multi Card Slot Using the Multi Card Slot you can use memory cards such as a Memory Stick Memory Stick Pro SD Card MMC or xD Card A memory card is used as a removable disk and is useful for exchanging data between a computer and a digital device such as a digital camera Transcend i ee By FUJIFILM 512 Memory Stick Memory Stick Pro SD Card MMC xD Card 7 A multi card slot is optional and is not provided for some models Restrictions when Using Memory Cards You can use memory cards for storing data only Copyright protection function is not
62. ars click Finish For the printer setup procedures refer to the description of item 7 of Setting Up a Network on page 73 When the settings are completed you can use the Internet on the shared client To access the Internet from the sharing client the sharing server has to be on To use the Internet on the sharing client select a sharing client icon from the Location List window and then click the Move button If the connection is broken while using the Internet on the sharing client click the Ap Active from the Wireless menu to reestablish the connection Network Status Diagnosis You can diagnose the network status when the network is not properly connected 1 Ze 3 80 Users Manual Run Samsung Network Manager Select Auto Diagnosis from the Manage menu The Network Connections figure window appears Click the Start button to start the network diagnosis When the diagnosis is complete out of order devices are marked by the exclamation mark icon For detailed device status read the description in the lower part of the window Reconnect and set up the device according to the diagnosis result N SAMSUNG Network Manager i le 4 gt A Device status Device Name Intel R PRO Wireless 2200BG Network Connectic Current computer didn t connect the interent cable Device Name Broadcom 440x 10 100 Integrated Controller lt A v eStart Cancel Using Network Services
63. ars click on View Devices within Coverage If the device to connect to appears click on the device E g mouse My Bluetooth Places Ses x File Edit View Bluetooth Favorites Tools Help ae I D p Search Wey Folders X My Bluetooth Places vi Go Norton Antivirus Q v SAMSUNG_X1 Bluetooth Tasks C Bluetooth Setup Wizard G7 SAMSUNG_ 1 File Transfer View devices in range w or modify config Other Places E Desktop If the device does not appear click the View Devices within Coverage If the device has not appeared yet since this menu changes to Search Devices within Coverage click the Search Devices within Coverage to show the device 4 If the Bluetooth PIN Code input window appears enter a PIN code referring to the manual of the corresponding device The PIN code for an HID device is generally printed in the manual of the corresponding device 5 If you enter the PIN code you can immediately use the device 92 Users Manual A Bluetooth keyboard and mouse work only in Windows They will not work in MS DOS mode or in Hibernation mode Stopping a Bluetooth device Right click the Bluetooth icon Ey on the taskbar and select Stop the Bluetooth device ur X Wi I wS Stop the Bluetooth Device To use a Bluetooth device after stopping it select Start Bluetooth device as above Use Instructions Bluetooth devices must be within a 3m distance For a better communications environment use the
64. at of a trunk line Therefore the modem may not make a call because the modem mistakes the dial tone from a PBX or a digital phone switching system as a busy tone In this case complete the following procedures Using an AT command As an initialization command use the command ATX3 Otherwise enter the ATX3 command manually before making a call It can correct this problem by skipping the dial tone check step Configuring the Modem through the Control Panel l 2 3 Click Start gt Control Panel gt Network and Internet Connections Under See Also click Phone and Modem Options In the Modems tab select the installed modem and click Properties Troubleshooting 127 Q3 Al oo ek a Q4 p Poa R aS 128 Users Manual In the Modem tab of the Modem Properties window clear the Wait for dial tone before dialing check box When the configuration is completed click OK How do I use my modem when dialing from overseas Check that the modem is correctly configured according to the current country Because the values for communication may differ according to the country you may not be able to connect via the modem due to an incorrect modem configuration Click Start gt Control Panel gt Network and Internet Connections Under See Also click Phone and Modem Options In the Dialing Rules tab click Edit In the General tab in the Edit Location window select the current country from the Country r
65. ate Standby or Hibernate modes while you are playing a multimedia program or have an active USB device connected 106 Users Manual Advanced Power Management Schemes This section discusses the advanced power management schemes There are two buttons that you can use to manually conserve power To enter the power management window complete the following 1 Click Start gt Control Panel gt Performance and Maintenance 2 Click pal icon to display the Power Options Properties window 3 Click the Advanced tab to display the advanced power management options Power Options Properties Power Schemes Alarms Power Meter Advanced femate Advanced Tab el h Select the power saving settings you want to use Options Always show icon on the taskbar Prompt for password when computer resumes from standby Power buttons When close the lid of my portable computer Do nothing When press the power button on my computer Power amp Sleep Button Ask me what to do Programming Windows When press the sleep button on my computer Stand by 4 Select the mode Do nothing Ask me what to do Standby Hibernate Shut down assigned to the Power button and or Rest lt Esc 4 gt key Also select the action Do nothing Standby Hibernate associated with closing the computer lid The Rest key is assigned to the lt Fn Esc gt key combination Basic Power Management Schemes on page 103 for a better underst
66. ating status of the computer Num Lock Caps Lock Scroll Lock Hard Disk Drive CD ROM Drive Wireless LAN Battery Power Turns on when the numeric keypad is activated Turns on when all alphabet characters you type will be in upper case Turns on when it is set to scroll the screen up and down while the cursor position does not change in some applications Blinks when the hard disk drive or CD ROM drive is in operation Turns on when the wireless LAN function is enabled This light does not operate for models without a wireless LAN Turned blue when the battery is fully charged or when the battery is not installed Turns amber when the battery is being charged Blinks when the battery is not properly installed Turned On when the computer is turned on Blinks when the computer is in Standby mode Getting Started 15 Adjusting LCD Brightness There are 8 levels of LCD brightness 1 Dimmest 8 Brightest To adjust using keyboard Press lt Fn gt lt gt or lt Fn gt lt 4 gt keys from the keyboard to adjust LCD brightness Whenever you turn the system on or change the power source the brightness level changes according to the settings when operating on AC power Brightness Level 8 when operating on battery power Brightness Level 1 Adjusting the brightness using the Battery Manager You can adjust the screen brightness using the Battery Manager p111 Z b
67. ation premium Viewer Using these programs you can play music photographs video and movies in full screen You can enjoy multimedia using A VStation now when the computer is off and using AVStation premium Viewer when the computer is on Ki 54 Users Manual Before You Start e AVStation now and AVStation premium Viewer are optional and may not be provided depending on the model e AVStation now Restrictions You can only use AVStation now when the computer is turned off Using AVStation now you can play files registered to the AVStation premium Library saved to My Computer and saved on the multi card slot For the procedures to register files to the Library refer to p45 p49 and p53 If you define a login password for a Windows user account or if the folder is protected you cannot play the files in the folder on AVStation now e AVStation premium Viewer Restrictions Using AVStation premium Viewer you can only play files registered to the AVStation premium Library For the procedures to register files to the Library refer to p45 p49 and p53 Since the screen layout and usage of the two programs are similar the manual describes the functions and screens on the basis of AVStation now e The screen figures may differ from actual ones depending on the program version e TV Station is only available for systems supporting the TV function Start Exit AVStation now Starting Press the AVS button JJ a H
68. ation tab click User configured and fill in the fields Click OK Internet Protocol TCP IP Properties General Altemate Configuration You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Use the following IP address Obtain DNS server address automatically Use the following DNS server addresses Connecting to the Internet 65 Connecting Through a Wireless LAN Optional A wireless network Wireless LAN environment is a network environment that enables communication between multiple computers at home or a small size office through wireless LAN devices Using the wireless network connections between the systems you can use normal network functions such as sharing of files folders and printers When a computer to computer network has been established a computer that is not connected to the Internet can share the Internet by accessing another computer connected to the Internet For details see Sharing Internet Access on page 77 Network Connection hereafter referred to as an 802 11ABG card device A wireless LAN card is optional The model of the wireless LAN card is determined by the relevant product Y The description in this section refers to the Intel R PRO Wireless 3945ABG To view the installed wireless LAN card click Start gt
69. cess LED is on the disk and the data in it may be damaged To eject a CD when the CD drive is not working or the computer is turned off unfold a paperclip and insert the unfolded end of the clip into the emergency eject hole located next to the eject button and press until the CD tray opens 7 Emergency Eject Hole To clean a CD or DVD title Clean the disc with a soft clean cloth by wiping from the center outwards Using the Computer 25 To use the Windows Media Player Window Media Player enables you to play and manage audio and video files To launch the Windows Media Player click Start gt All Programs gt Accessories gt Entertainment gt Windows Media Player Running the program the first time displays the set up screen Define the settings according to the instructions displayed on the screen When you complete the settings the following screen appears Features Playlist Playback Control Area Run Windows Media Player and right click over the Function Taskbar and To view detailed information on how to use Windows Media Player Fi select Help gt Windows Media Player Help To play a video CD If a video CD does not run automatically follow these steps Insert a video CD into the CD drive When the CD drive window appears double click the MPEGAV folder Double click the dat file When the Caution dialog appears click Open With Select Select the program from a list and click OK
70. correcting any computer operational problems gt Check the Connections Verify all of the power and peripheral cables are securely plugged into their sockets and that your system and power supply is on gt Norton AntiVirus Run Norton AntiVirus to ensure a virus is not affecting your computer To run Norton AntiVirus proceed as follows Click Start gt All Programs gt Norton AntiVirus gt Norton AntiVirus 20xx gt Magic Doctor Magic Doctor is a program developed and distributed by Samsung Computer and is used to troubleshoot problems Since this program enables you to diagnose your system with one click try to diagnosis your system with Magic Doctor Click Start gt All Programs gt Samsung gt Magic Doctor gt Magic Doctor p142 gt Windows Help and Support Run Windows Help and Support to find problem that may be affecting your computer To run Windows Help and Support proceed as follows Click Start gt Help and Support gt Frequently Asked Questions To view FAQ s on your computer please visit www samsungpc com gt Reinstalling Software If for some reason your system crashes you may corrupt your HDD Windows operating system and or some of your device drivers If this is the case use System Recovery CD to reinstall OS and System Software Media to reinstall the corrupt device drivers Troubleshooting 119 System Recovery Precaution Before you start restoring your windows operating system insure y
71. cted to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5 xiv Users Manual European Union European Union CE Marking and Compliance Notices Products intended for sale within the European Union are marked with the Conformit Europ ene CE Marking which indicates compliance with the applicable Directives and European standards and amendments identified below This equipment also carries the Class 2 identifier The following information is only applicable to systems labeled with the CE mark C European Directives This Information Technology Equipment has been tested and found to comply with the following European directives e EMC Directive 89 336 EEC with amending directives 92 31 EEC amp 93 68 EEC as per EN 55022 Class B EN 61000 3 2 EN 61000 3 3 EN 55024 Low Voltage Directive Safety 73 23 EEC as per EN 60950 A 1 A2 A3 A4 All Radio and Telecom Terminal Equipment Directive 199 5 EC as per CTR21 if fitted with a modem device ETS 300 328 if fitted with a 2 4 GHz band embedded wireless device ETS 301 489 1 if fitted with a 2 4 GHz band embedded wireless device ETS 301 489 17 if fitted with a 2 4 GHz band embedded wireless device European Radio Approval Information for products fitted with EU approved radio d
72. d This screen does not appear if Internet Sharing Network Wizard has been installed in the computer to computer wireless network environment 3 Select Just enable file sharing and click OK 4 Inthe Network sharing and security field select Share this folder on the network enter the share name and click OK Be cautious when selecting Allow network users to change my files since other network users can change the files in the shared folder The file and folder sharing configuration has been completed 82 Users Manual Step 2 Using Shared Files or Folders This section describes how to access shared files or folders if your computer is a member of the same workgroup Double Click My Network Places of desktop under Other Places Click View workgroup computers and click the desired computer to access the shared file z My Network Places If your computer is a member of another workgroup 1 Click Other Places gt Microsoft Windows Network 2 Click the desired workgroup 3 Click the desired computer to display the shared files or folders Connecting to the Internet 83 Sharing Printers This section describes how to share a printer between computers connected to a network To share a printer complete the following procedures e Step 1 Configure printer sharing in the computer connected to the printer Step 2 Add and use the shared printer in other computers on the network Step
73. d data in the cache Glossary 157 CardBus CardBus technology enables the computer to use 32 bit PC Cards Hardware in the computer and the Windows operating system provide support for the 32 bit cards The voltage of 32 bit cards 3 3 volts is lower than that of 16 bit cards 5 volts The 32 bit cards can transmit more data at a time than the 16 bit cards thus increasing their speed CMOS memory CMOS complementary metal oxide semiconductor memory is powered by the CMOS battery The System Setup settings and other parameters are maintained in CMOS memory Even when you turn your computer off the information in CMOS memory is saved COM port COM stands for communication COM ports are the serial ports in your computer Compact Disc A compact disc CD Conventional memory The first 640 KB of system memory Operating systems and application programs can directly access this memory without using memory management software Disk The device used by the computer to store and retrieve information Disk can refer to a floppy disk hard disk or RAM disk Disk cache A software device that accumulates copies of recently used disk sectors in RAM The application program can then read these copies without accessing the disk This in turn speeds up the performance of the application A cache is a buffer for transferring disk sectors in and out of RAM Data stored in a disk cache is a copy of data already stored on the physical disk DM
74. devices supporting the Bluetooth function without a cable connection Ki The Bluetooth function is only available between devices supporting Bluetooth computers mobile phones PDAs printers etc and the function may be restricted depending on the device profile The Bluetooth function is optional and may not be supported depending on your model Bluetooth Functions 86 Users Manual File Transmission 47 You can exchange files between 2 Bluetooth devices You can exchange files with other computers mobile phones PDAs etc Network Access You can connect to another computer with the Bluetooth function as you access a wireless LAN in Ad Hoc mode or connect to the Internet through an AP or Internet Connecting Sharing Server Network Access through a Phone Connection E You can connect to the Internet through a Bluetooth mobile phone Data Sync Synchronization 2 You can synchronize the PIMS data Outlook E mail address data with mobile phones PDAs notebook computers etc supporting Bluetooth Electronic Business Card Vcard Exchange RD You can exchange electronic business cards with mobile phones PDAs notebook computers etc supporting Bluetooth Sound Output You can listen to audio from the computer through another Bluetooth device or listen to audio of another Bluetooth device through the computer HID Connections H You can connect a keyboard mouse joystick etc supporti
75. devices in an open space where no wall or obstacle exists For a telephone connection data synchronization electronics business card exchange fax transmission reception sound related functions and serial port function you can connect with only one Bluetooth device Using the network connection or file transmission function multiple Bluetooth devices can be connected However since connecting with multiple devices may slow down the data rate or make the connection unstable connecting with one device at a time is recommended The Bluetooth function of a Bluetooth PDA mobile phone mouse or keyboard may be turned off To use them in connection with a Samsung computer supporting Bluetooth you must check if the Bluetooth function of the device to connect to is turned on For the procedures on turning on the Bluetooth function of a device refer to the manual of the device The services provided by Bluetooth devices may vary depending on their capability For the services provided by Bluetooth devices refer to the manual of the device Connecting to the Internet 93 Customizing Your Computer Using System Setup The System Setup BIOS program enables you to configure your computer hardware and set security and power savings options The settings you choose are stored in battery maintained CMOS memory that saves the information even when the computer s power is turned off When your computer is turned back on it is configured
76. dicated as 2 Now you can view the screen through two monitors 1 Primary 2 Secondary When you use Dual View configuring the LCD as the Primary monitor is 7 recommended with 256 colours change the settings to the desired screen resolution and If the screen of the secondary display device is displayed at 640x480 pixels Z colour quality in the Display Properties dialog box Deactivating Dual View Mode Click the monitor 2 icon clear the Extend my Windows desktop onto this monitor check box and then click Apply Click the title bar of the window in the primary display device 1 the LCD and drag it to the secondary display device 2 The window is moved to the 7 To move a window between display devices in Dual View mode secondary display device 102 Users Manual System Management Using Power Management Options Your computer includes Power Management options that can help the battery charge last longer and extend the life of the battery Power management options will slow down or shut off system components when the components are not being used Power management may slow down system performance Your computer runs fastest with the power cord attached whereby power management is disabled In the next sections basic and advanced methods of power management will be discussed Basic Power Management Schemes This section discusses the basic schemes of power management when the computer is operating
77. dicated by do not work in some applications When pressing the Power Standby Button in Windows the computer enters Standby mode The computer will not shut down Remote Control Operating Range The valid distance for the remote control is determined by the user environment It is recommended to use the remote control within 3 meters and a 45 degree angle from the remote control sensor on the device When the remote control is not being used keep the remote control in the PCMCIA slot To keep the remote control in the slot insert the remote control into the slot so that the Remote Control Signal Transmitter faces outward Getting Started 19 Introducing Windows Understanding the Desktop The desktop 1s the working area on the computer It consists of the large workspace and a taskbar at the bottom Shortcut Icons Start Menu Recycle Bin Language Bar Start Button guag Taskbar System Tray with Clock Start Button Opens the Start menu Taskbar Displays programs that are currently running Frequently used icons can be placed here Recycle Bin g Deleted files or folders are sent here Language Bar Switches text input language 20 Users Manual Understanding the Start Menu The Start menu includes everything that is required to start Windows From the Start menu it is possible to run a program open a file assign system users with Control Panel receive support by clicking Help and Support
78. during playback in the Media Player In DOS mode changing the full screen DOS mode by pressing lt ALT gt lt Enter gt key displays a broken image for a short period The DOS mode which supports 2 Byte characters such as Korean and Japanese runs in graphic not in text mode In this case a broken image may be displayed while changing the video mode settings In the following cases the screen blinks or displays noise for a short time Click the Graphics Related tab Change Resolution Change Display Device Remove the AC Adapter Restart the System Change PowerMizer level This may happen while the video driver is examining the connected device While detecting any connected display devices may blink or some noise may occur When I connect a projector and change the setting to display screen image on both the LCD and the projector by pressing lt Fn gt lt F4 0o gt keys screen is not displayed properly Press lt Fn gt lt F4 a o gt keys once again If the same problem continues it means the projector cannot support the resolution Lower the resolution to 1024 x 768 Q6 Q7 QS Q9 Q10 The desktop momentarily appears as a broken image when zooming in or out of the Media Player screen when Media Player is running Since zooming in or out of the Media Player screen changes the screen resolution the desktop may momentarily appear as a broken image during this operation The playback screen of a DVD title o
79. e order of SOL39 RG1000 64 preferred networks oh p Change advanced if Security enabled wireless network settings Connect 3 The network key security key input window appears If a network key has been set for the wireless LAN AP enter the network key and click the Connect button For the network key information ask your network administrator If no network key has been set for the wireless LAN AP click the Connect button without entering the network key 4 When the computer is connected to the wireless LAN AP the Connected message will appear on the Wireless Network icon in the Taskbar Using the network after moving location By setting the network settings IP address printer setting etc for each location you can immediately access the network without performing the network setting procedures regardless of your location 1 Run Samsung Network Manager when connected to the Internet 76 Users Manual 2 Select an icon that represents the corresponding location from the Saved Locations window and then click Move 3 When the network settings of the selected location are applied the new location and the network connection information are displayed in The detailed Information for window Sharing Internet Access This section describes the procedures to share Internet Access To share Internet Access you first have to set a sharing server and a sharing client When the setup is complete you can access
80. e played and click Open The selected file is registered to the Library and played e Playing a Video File in Full Screen 1 Double click on the current playback screen 2 The video is played in full screen In full screen move the mouse pointer to the bottom of the screen to show the Play Control bar To play at the default screen size press the lt Esc gt key or double click on the screen e Capturing the Video Screen Click on Capture Current Screen below the Play window when the desired image appears on the screen and click the OK button Captured images are saved in the C Program Files Samsung A VStation Premium 3 7 Data Captured Images folder In addition you can view captured images in the PHOTO Station gt Captured Images folder 52 Users Manual Adding Videos to the Library The MOVIE Library is a library holding video files to be used by MOVIE Station The procedures to add video files saved on the computer to the Library are described below You can add files add folders or search and add files As an example the procedures to add folders are described below 1 Click the Register a File fee button below the Library and click Add by Folders 2 Select a folder which includes video files and click the OK button The video files in the folder are added to the Library Ki The video files used in AVStation are automatically added to the Library Using the Computer 53 Using AVStation now AVSt
81. e tracks on the audio CD are displayed in the Playlist and the first track is automatically played el AW Stations If an audio CD is already in the CD drive double click the album title in the Audio CD folder of the Library and add the tracks to the Playlist The tracks added to the Playlist are played Using the Computer 43 Playing a Music File If a music file is registered to the MUSIC Library you can easily play the music file For the procedures to register tracks to the Library refer to p45 1 Move to MUSIC Station and double click on All Music 2 Double click a music file The file is added to the playlist and played Eed AV Station Play a Track not registered to the Library Click File gt Open select a music file to be played and click Open The selected track is registered to the Library and played Creating My Playlist My Playlist is a personal album with which you can collect manage and play your favorite music files For the procedures to create My Playlist refer to the descriptions of MUSIC Station in Help 44 Users Manual Adding Music Files to the Library MUSIC Library is a library holding music files used by MUSIC Station The procedures to add music files saved on the computer to the Library are described below You can add files folders or search and add files As an example the procedures to add a folder are described below 1 Click on the Register a File E button below the L
82. ed Locations window Now you can use the Internet or add a new network location SAMSUNG Network Manager Manage Wireless Help Menu The detailed Information for Current Place N 168 219 55 35 Information Direct Connectior No Default Printer Location List Saved Locations House Connecting to the Internet 75 Wireless LAN AP Connection Procedures To use a wireless LAN first connect to a wireless LAN AP and then you can access the network even when moving location Or moving location and then you can access the network even when connecting to a wireless LAN AP 1 Right click over the Wireless Network Connection imu icon on the Taskbar and click View Available Wireless Networks 2 Click Search AP from the Wireless menu to search for wireless LAN APs Select an available wireless network e g SAMSUNG and click the Connect button For information on available wireless LAN APs ask your network administrator i Wireless Network Connection Networie Ta Choose a wireless network Refresh network list Click an item in the list below to connect to a wireless network in range or to get more information 2 Set up a wireless network e SAMSUNG Automatic jw for a home or small office Security enabled wireless network all E Avail abl e AP Related Tasks This network requires a network key IF you want to connect to this network click Connect A Learn about wireless networking fe Change th
83. egion radio box specify the Area code and click OK Because the shape of the telephone plug may differ according to the country you have to purchase and use the appropriate telephone plug for that particular country How do I receive a fax while the system is in power saving mode Rest mode To receive a fax in Standby Mode you have to set it up as follows The automatic fax reception function of the fax program needs to be activated For more information refer to the corresponding fax program manual Click Start gt Control Panel gt Network and Internet Connections Under See Also click Phone and Modem Options In the Modems tab select the installed modem and click Properties In the Power Management tab of the Modem Properties window select the With this device exit the computer from stand by mode item and then click OK The above setting enables the modem to turn on the system and receive a fax when in power saving mode Wired LAN Related Q1 Q2 lt Wake On LAN gt function lt Wake On LAN gt is a function that activates the system in rest mode when a signal such as ping or magic packet commands arrives from network wired LAN To use lt Wake On LAN gt function Select My Network Places gt View network connections from the Desktop Click the right button on the touchpad over Local Area Connection and select Properties Click Configure and select Power Management tab Select Allow this
84. ep 3 before automatically installing Windows Quick Installation overwrites the existing Windows version so that drivers or applications do not need to be reinstalled 4 After the system has restarted the message Press any key to boot from CD appears Do not press any key at this time After a while the partition configuration screen appears To not change the partition press lt Enter gt What is partition configuration Partition configuration is a function that devides the hard disk drive into one or several partitions Note that changing the partition deletes all of the data on the hard disk drive 5 Select the folder to install the Windows operating system To delete the previous version of Windows and install in the current folder press lt L gt on the keyboard If you press ESC to select another folder for the installation new Windows folders are created causing a risk of dual booting 150 Users Manual 6 After the installation process copies the necessary folders for the Windows installation restart the system and the message Press any key to boot from CD is displayed You do not need to enter anything In a moment the Windows XP installation screen will appear to proceed with the installation 7 When the Regional and Language Options window appears click Next 8 When a window that requires your name and organization pops up enter your name and the organization and click Next In the Windows XP
85. er the network name To use the network key security key select the Use Password option and enter a network key Remember the network key because you have to re enter the key on the sharing client to connect to the sharing server The setup information is displayed Confirm the settings and click the Next button When the Printer Setting window appears click Finish For the printer setup procedures refer to the description of item 7 of Setting Up a Network on page 73 When the Shared Server setting is completed set up the shared client Setting Up the Sharing Client 1 2 3 Run Samsung Network Manager on the computer to be used as a sharing client Click the Add button Select a network location icon and enter the name of the location Click the Next button Select Internet Sharing and click the Next button To connect through a wired LAN select Internet Sharing Wired 7 To connect through a wireless LAN select Internet Sharing Wireless 5 Confirm the network device to be connected to the server and click the Next button e g Samsung you entered in the sharing server If you have set a network To connect through a wireless LAN enter the wireless connection name key security key for the sharing server enter the network key 6 The setup information appears Confirm the information and click the Next button Connecting to the Internet 79 When the Printer Setting window appe
86. erating properly Click Refresh to view the latest search result Running Help file while running Profile Wizard in the wireless LAN program PROSet makes the PROSet window white It will be displayed properly when you finish the profile wizard It dose not affect the program operation The network does not operate properly when both the wireless and the wired network connections are simultaneously configured with the same IP address You cannot use the wireless and the wired network connections using the same IP address simultaneously To use either the wireless or the wired network in turn with the same IP address you have to Disable whichever network device will not be using in the network connection of the Control Panel Q10 The wireless LAN does not work properly when there is a device operating Al A2 Q11 A1 A2 A3 on an adjacent frequency in the vicinity of the product Channel interference may occur when a wireless video transceiver or a microwave oven is being used If you experience channel interference from other equipment it is recommended changing the channel to connect to the AP For more information about AP settings refer to the User Manual supplied by the AP manufacturer Since IEEE802 1 1g equipment operates in hybrid mode when there is active IEEE802 11b equipment the data rate may be degraded An established wireless LAN connection is disconnected after 2 3 minutes and the connection is not recove
87. ers connection cables Purchased separately DVD drive and DVD playing program on the computer Optional DVD title that supports 5 1 channel Purchased separately To use home theater system complete the following procedures Step 1 Connect 5 1 channel speaker system to your computer Step 2 Configure digital sound output on the computer Step 3 Enable S PDIF output on the DVD program Using the Computer 29 Step 1 Connect 5 1 channel speaker system to your computer 1 Connect the S PDIF jack of the system and a 5 1 channel amplifier 2 Connect speakers to the amplifier Refer to speaker s manual 3 To view through a TV connect the TV and change the current display device to TV in the Display Properties Using External Display Devices on page 100 Sub Woofer Center X j Speaker N ss Surround Left Speaker Surround Right Speaker Step 2 Setting the Sound to Digital Sound Output on the Computer Since the sound of the computer is set to Digital Output by default when purchasing the computer additional settings are not required You can confirm the setting as follows 1 Double click the Volume Control 8 icon in the notification area of the Taskbar and select Options gt Advanced Controls 2 Click the Advanced button below the Master Volume and check if the 1 Disable Digital Output item is unselected The option must be unselected for sound to be output in digital format 30 Users M
88. es references and troubleshooting information regarding computer use Click Start gt Help and Support Please refer to help and support centre before calling the Samsung helpline Windows XP Tour You can tour elementary functions provided by Windows XP Click Start gt Tour Windows XP Or click Start gt All Programs gt Accessories gt Tour Windows XP Click on the topics to find out about important functions of Windows XP Introducing Windows 23 Using the Computer Using the CD Drive You have one of following drives installed in your computer RW Combo Drive Reads a CD DVD and writes a CD DVD Super Multi Drive Reads CD DVDs and writes data to CD DVDs Supported DVD types include DVD R DVD RW and DVD RAM A CD ROM drive is optional For more detailed product specifications refer to the product catalog To insert a CD 1 Press the Eject button on the side of the CD drive 2 When the tray slides out place a CD onto the tray with the label facing up and push the CD down until it clicks Emergency Eject Hole CD Access LED Eject Button 3 Push the tray in gently until it clicks 24 Users Manual To eject a CD 1 Stop any process that accesses the CD drive and ensure the CD access LED is turned off 2 Press the eject button on right side of the CD drive 3 When the tray slides out remove the CD from the tray 4 Push the tray in gently until it clicks If you remove the CD when the CD ac
89. evice near the body this does not include extremities is typical This device should be used more than 20 cm 8 inches from the body when wireless devices are on The power output of the wireless device or devices which may be embedded in your notebook is well below the RF exposure limits as set by Industry Canada This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter Operation of this device is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device To prevent radio interference to licensed service this device is intended to be operated indoors and away from windows to provide maximum shielding Equipment or its transmit antenna that is installed outdoors is subject to licensing Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Contact manufacturer for service Regulatory Compliance Statements xiii Telecommunications per DOC notice for products fitted with an IC compliant modem The Industry Canada label identifies certified equipment This certification means that the equipment meets certain telecommunications network protective operation and safety requirements The Department does not guarantee the equipmen
90. evices This Product is a Notebook computer low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4 GHz band may be present embedded in your notebook system which is intended for home or office use This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices Regulatory Compliance Statements xv Wireless devices that may be in your system are only qualified for use in the European Union or associated areas if a CE mark with a Notified Body Registration Number and the Alert Symbol is on the system label The power output of the wireless device or devices that may be embedded in you notebook is well below the RF exposure limits as set by the European Commission through the R amp TTE directive See 802 11b and 802 11g restrictions for specific countries or regions within countries under the heading European Economic Area Restrictions below Translated Statements of Compliance This product follows the provisions of the European Directive 1999 5 EC European Economic Area Restrictions Local Restriction of 802 11b 802 11g Radio Usage Note to integrator The following statements on local restrictions must be published in all end user documentation provided with the system or product incorporating the Intel PRO Wireless 2200BG Network Connection product Due to the fact that the frequencies used by 8
91. ey For example to type the letter m press lt Fn M gt this operation displays the letter m To turn the numeric keypad off press lt Fn Num Lock gt again The Num Lock LED turns off 10 Users Manual Using Special Function Keys The function key activates special functions when it is pressed in combination with another keys lt Fn gt Key Key Name Key Function Combinations lt Esc J gt Standby Places the computer into standby mode To resume from standby mode press the power button p103 lt F2 C gt Gauge Shows the remaining battery charge Appears only when the Samsung Display Manager program is installed lt F4 O gt LCD CRT Switches the display between the LCD and external display device when an external display device is connected p100 lt F5 Backlit gt Backlight Turns the LCD on and off lt F6 Mute gt Mute Turns the audio output on and off lt F7 SRS gt SRS This feature enables you to experience more stereophonic sound You can select one of the following modes by pressing the button Note WOW XT Mode Select to listen to music TRUSURROUND Mode Select to watch a movie SRS OFF Mode Switches off the SRS function The SRS function is only supported through the built in speaker of the computer and the headphones It is not supported through the S PDIF port lt F8 e1 gt Wireless LAN Turns the wireless LAN on or off Note Wireless LAN is optional and may not be supported depending on yo
92. g so will block the bottom vents If you use an extension cord with this system make sure that the total ampere rating on the products plugged into the extension cord does not exceed the extension cord ampere rating Care During Use Do not walk on the power cord or allow anything to rest on it Do not spill anything on the system The best way to avoid spills is to not eat or drink near your system Some products have a replaceable CMOS battery on the system board There is a danger of explosion if the CMOS battery is replaced incorrectly Replace the battery with the same or equivalent type recommended by the manufacturer Dispose of batteries according to the manufacturer s instructions If the CMOS battery requires replacement insure that a qualified technician performs the task When the computer is turned off a small amount of electrical current still flows through the computer To avoid electrical shock always unplug all power cables remove the battery and modem cables from the wall outlets before cleaning the system Unplug the system from the wall outlet and refer servicing to qualified personnel if The power cord or plug is damaged Liquid has been spilled into the system The system does not operate properly when the operating instructions are followed The system was dropped or the casing is damaged The system performance changes The Instruction On Safety Operation of NotePC 1 At installatio
93. h for both sound and modem devices If you install the modem device this message will not appear If necessary install the modem device together The number of the High Definition Audio KB888111 Hotfix may differ if you have updated the Hotfix from the Microsoft web site Modem Related Q1 Al A2 Q2 I cannot hear the modem sound Check that the telephone line is properly connected to the modem Check that the modem driver is installed properly Click Start gt Control Panel gt Performance and Maintenance gt System Select Hardware tab gt Device Manager gt Modems in the System Properties window and check if there is a yellow exclamation mark on the installed modem icon If there is delete the modem device driver and reinstall the driver because the yellow exclamation mark represents a not properly installed driver If there is no yellow exclamation mark double click the installed modem and click Diagnostics tab gt Query Modem in the Modem Properties window to diagnose the modem No message in either of Command and Response in the Diagnostics tab means that the modem is not operating properly Diagnose the modem again after restarting the system or reinstalling the driver You have to exit all programs using modem in the advance of diagnostics of the modem I cannot make a call using an extension line In general the dial tone of a PBX or a digital phone switching system is not a continuous one unlike th
94. hassis voids your warranty Only an authorised manufacturer service center can replace or add any parts inside the chassis Follow all the instructions and cautions in your computer user documentation The LCD has a polarized surface and can be damaged easily To prevent damage avoid touching the screen Use only approved AC adapters auto adapters memory modules and other options Because a notebook computer is small and has restricted air flow around components it is more likely to overheat than a desktop computer A fan inside your computer runs when needed to help eliminate heat Make sure the fan vent on the left side of your computer is not blocked when you use the computer Occasionally check the vents and remove any accumulated dust on the outside Avoid using or storing the computer in extremely hot or cold areas such as a car on a hot day Keep the computer away from heaters and out of direct sunlight Exposure to excessive heat may damage computer components If you have left your computer in a hot place let it cool down slowly to room temperature with the LCD panel open before using it Do not remove the memory module compartment door or try to install a memory module when the computer is on Set up your computer work area to avoid physical strain Sit with your back straight and supported by your chair Adjust your chair or work table so that your arms and wrists can remain in a relaxed position parallel with the floor
95. hat the user limit exposure time if the antenna is positioned closer than 20cm 8 inches Use On Aircraft Caution Regulations of the FCC and FAA prohibit airborne operation of radio frequency wireless devices because their signals could interfere with critical aircraft instruments Other Wireless Devices Safety Notices for Other Devices in the Wireless Network Refer to the documentation supplied with wireless Ethernet adapters or other devices in the wireless network The Part 15 radio device operates on a non interference basis with other devices operating at this frequency Any changes or modification to said product not expressly approved by Intel could void the user s authority to operate this device Unintentional Emitter per FCC Part 15 This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generate uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference will not
96. he battery life and optimizes the Intel Speedstep function Since the CPU power consumption is automatically optimized to conserve power when the computer is operating on battery power an application may be executed slower than when it is operating on AC power To use BatteryMgr normal mode after reinstalling Windows install the Battery Manager program using the system software Media 4 Select the time that you wish each of the following actions to occur in Battery and AC power mode e Turn off monitor Turn off hard disks e System standby System hibernates Turning off the monitor and HDDs will save a substantial amount of battery power therefore when in battery only mode select the shortest time practical 104 Users Manual You can also reserve Turning Computer Off Hibernation state Hold Mode etc by selecting System gt Computer Scheduling in the EasyBox program see Using EasyBox on page 37 If you change the power settings in the Battery Manager program the settings of the Power Options Properties window are automatically changed accordingly Using the Battery Manager p111 Hibernate Mode Power Management or Manual Method When hibernation is used your computer turns off and when you power up again everything is restored exactly as you left it including programs and documents you may not have saved or closed Everything in memory gets saved to the HDD and the monitor and hard disk get turned off
97. human contact during normal operation As a general guideline a separation of 20 cm 8 inches between the wireless device and the body for use of a wireless device near the body this does not include extremities is typical This device should be used more than 20 cm 8 inches from the body when wireless devices are on and transmitting This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter Some circumstances require restrictions on wireless devices Examples of common restrictions are listed below Radio frequency wireless communication can interfere with equipment on commercial aircraft Current aviation regulations require wireless devices to be turned off while traveling in an airplane 802 11B also known as wireless Ethernet or Wifi and Bluetooth communication devices are examples of devices that provide wireless communication vi Users Manual In environments where the risk of interference to other devices or services is harmful or perceived as harmful the option to use a wireless device may be restricted or eliminated Airports Hospitals and Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be restricted or eliminated When in environments where you are uncertain of the sanction to use wireless devices ask the applicable authority for authorization prior to use or turning on the wireless device Every country has different
98. i of the computer when the computer is turned off Exiting Move the mouse pointer to the top screen and click the Exit E button 4 MUSIC An Music All Music Bi Highway Blues Gi Aguzate Album F Home of the Future Gi intro F Mask E Mask English Gi No Vaya Ey oo Bi Symphony No 9 Scherzo E try me Alternatively press the Power button of the computer For models with the remote control press the Power Standby button on the remote control to exit Using the Computer 55 Start Exit AVStation premium Viewer Starting Select Start gt All Programs gt Samsung gt AVStation premium gt A VStation premium Viewer from Windows Alternatively press the AVS button 3 fa H of the computer from Windows Exiting Move the mouse pointer to the top of the screen and click the Exit E button 4 MUSIC an music All Music Gi Highway Blues F Aguzate E Home of the Future Gi Intra Gi Mask E Mask english Gi No Waya GB Olan Ey symphony No 9 Scherzo E try me Album 56 Users Manual Screen Layout AVStation Wo TV Music Paco Movie Settings Fer 37 IRS MUSIC You can play a music file or audio CD PHOTO You can view a photograph or image file one by one or in a SlideShow MOVIE You can play a video DVD or VCD title Settings You can set the Music Photo and Movie settings Hi button or lt ESC gt key Or move the mouse pointe
99. ibrary and click on Add by Folders 2 Select a folder which included music files and click the OK button The music files in the folder are added to the Library Browse for Folder Select Folder to Search Desktop B My Documents S My Computer See Local Disk C H g Audio CD D H Shared Documents w Administrator s Documents a My Network Places Esa ae MediaSample E The tracks used in AVStation are automatically added to the Library Using the Computer 45 PHOTO Station Launch AVStation premium and click PHOTO on the Station Bar AVStation PHOTO Menu Bar Station Bar PHOTO Library Register a File Image Viewer Tab Image Editor Tab Move to a Higher Level Folder Preview Zoom in Viewing an Image The procedures to view images registered to the PHOTO Library one by one and through a SlideShow are described below For the procedures to register image files to the Library refer to p49 1 Move to PHOTO Station and double click on All Images Click on a folder which includes images and the images in the folder are displayed in the Image Viewer window AVStation ie ct Yew Took Het Image Viewer Window Image 46 Users Manual 3 Double click on an image The selected image is zoomed in on Eel AW Station Q2Qa lt ragan Viewing an Image not registered to the Library Click File gt Open select an image file to view and click O
100. ing programs which Windows can detect and select one from the list A list of anti virus programs that Windows can detect Symantec Norton Anti Virus NetworkAssociates McAfee TrendMicro ComputerAssociates Panda Kaspersky Ahnlabs AhnLab Visit the Microsoft Web site www microsoft com regularly to check the latest list Other Q1 4GB memory capacity is not properly recognized by Windows Windows XP SP2 cannot display a memory capacity over 4GB due to license and driver compatibility problems Even if the system information shows only 3GB of memory the system memory capacity is 4GB and is normal Troubleshooting 141 Using Magic Doctor Magic Doctor is troubleshooting software provided by Samsung Computer A user can diagnose system problems via one click or by selecting diagnostic items 1 Click Start gt All Programs gt Samsung gt Magic Doctor gt Magic Doctor 2 Click on an icon at the top of the screen Magic Doctor WET Doles eo meee OneClick Diagnosis User Diagnosis System Recovery MAGIC Doctor Samsung MAGIC Doctor provides users with an easy to use interface to diagnose the system to detect hardware problems and to resolve the detected problems OneClick Diagnosis You can diagnose problems affecting the system connections and system operations via one click User Diagnosis You can select the necessary diagnostic items and diagnose system problems System Reco
101. interfaces in terms abstract enough to allow flexible and innovative hardware implementations and concrete enough to allow shrink wrap OS code to use such hardware interfaces BIOS BIOS stands for basic input output system The BIOS is software often called firmware that is independent of any operating system It enables the computer to communicate with the screen keyboard and other peripheral devices without using programs on the hard disk The BIOS on your computer is flash BIOS which means that it has been recorded on a flash memory chip that can be updated if needed Boot To start your computer A cold boot resets the entire computer and runs through all computer self tests A warm boot clears out computer memory only Boot disk A disk containing operating system programs required to start your computer A boot disk can be a floppy disk hard drive or compact disc Byte The basic unit of measure for computer memory A character such as a letter of the alphabet uses one byte of memory Computer memory is often measured in kilobytes 1 024 bytes or megabytes 1 048 576 bytes Each byte is made up of eight bits For more information on bytes and bits see an introductory book on computers Cache memory Cache is very fast zero wait state memory located between the microprocessor and main memory Cache reduces the average time required by the microprocessor to get the data it needs from the main memory by storing recently accesse
102. is appropriate for conditions which require the maximum battery use time This may degrade the performance of the system e Normal Mode This mode is appropriate for normal conditions Both system performance and battery use time are optimized System Management 111 e Maximum Performance Mode This mode is appropriate for conditions that require maximum system performance Therefore the battery usage time may be reduced in this mode e Custom Mode In this mode a user can configure a detailed configuration to save the battery usage time You can adjust the LCD brightness the system standby time the screen color quality and the graphic mode values Power Saving Effect 7 This shows the relative battery use time for each power mode The more effective the power saving the longer the graph will appear When Running a Game or Multimedia Application A game or multimedia application may not work smoothly in Maximum Battery Saving Mode Using this is recommended when the AC adapter is connected or in Normal or higher modes Turning Off Unnecessary Devices Turning off unnecessary devices extends the battery use time Select the Start gt Control Panel gt Performance and Maintenance gt System gt Hardware tab and click Device Manager Right click a device you are not using and select Disable e g wireless LAN 1394 etc Battery Calibration If you charge discharge the battery repeatedly for only a short time the battery u
103. it key this is sometimes represented by 40bits and a 128 bit key Key index Select the current encryption key index used by the access point out of 1 to 4 Using an encryption key Click Use pass phrase to activate and enter 5 for 64 bit or 13 for 128 bit alphanumeric characters represented by 0 9 a z or A Z 6 The Done window appears click OK When a wireless connection to an access point is established the connection icon appears in front of the name of the connected profile 72 Users Manual Using Samsung Network Manager Samsung Network Manager is a program that has been developed to enable users to use the network easily Samsung Network Manager provides the following features You can easily set up the network and printer settings e You can immediately use the network without defining new network settings again after moving locations By setting the network settings IP address printer settings etc for each location you can immediately access the network without following network setting procedures each time regardless of your location You can easily share Internet Access You can share your Internet connection by setting up a computer with 2 LAN interfaces wired and wireless or 2 wired LAN as the sharing server Then you can access the Internet on a sharing client by connecting to the sharing server e You can diagnose the network status You can diagnose the network status when the ne
104. le tabs outward to pop the memory module upwards Carefully pull the module out at an angle of about 30 System Management 113 Adding a memory module 1 Align the new memory module connectors accordingly and slide it into the slot at a 30 angle Ensure the notch on the memory module corresponds with the notch on the socket b 2 Push the memory module in until the module clicks into place If the memory module is not fixed completely gently push the memory down while pressing the memory module tabs outward 3 Close and fix the memory module compartment cover using a screwdriver 114 Users Manual Using the Security Lock Port The security lock is a device used to physically fix the system when using it in a public place The locking device needs to be purchased separately The shape and methods of use may differ depending on the manufacturer Please refer to the manual provided with the security lock for proper use 1 Connect a security lock cable to a fixed object 2 While holding the security lock port lever to the left connect the cable to the security lock port Any damage to the machine caused by using a locking security device is not covered under warranty b System Management 115 Tips for Using Your Computer The following information helps you avoid potential problems as you use your computer 116 Users Manual Do not try to disassemble your computer Opening the system c
105. lick on Music 58 Users Manual 2 Click on All Music and double click a file in the right pane The music file is played i af Music All Music All Music J Artist Ej Aguzate E Home of the Future Gi Dnbre Mask Mask English By no vaya Ej owe i Symphony No 9 Scherzo E try me Album Playing an Audio CD My Computer This only appears in AVStation now You can manually find and play files on My Computer or the multi card slot All Music Playlist Window Music File 1 Launch AVStation now and insert an audio CD into the CD drive 2 Inthe AVStation now start screen click on Music 3 Double click the Audio CD in the left pane and double click on an album or music file in the right pane The selected music file is played 4 MUSIC audio cp i Using the Computer 59 PHOTO Station The procedures to view images registered to the PHOTO Library one by one and through a SlideShow are described below For the procedures to register image files to the Library refer to p49 1 Launch AVStation now and click on Photo 2 Click on All Images and double click on an image file in the right pane IETS Photo All Images gt 2005 gt 11 oO My Computer 4 This only appears in ty Computer 4 AVStation now You can ANImepes 3 manually find and play a E files on My Computer or 84 creatureo2 2005 11 16 the multi card slot 3 creatures 2005 11 16 All Images ee 2005 11 16
106. ly displayed Some games and 3D application programs may change the display device control Therefore pressing the lt Fn gt lt F4 S 0 gt keys may terminate the running program or may display an abnormal screen Press the lt Fn gt lt F4 S 0 gt keys before launching a program and do not press them while running the program Running speed of a game is too slow or fast Change the setting of Power Schemes to Always On Click Start gt Control Panel gt Performance and Maintenance gt Power Options gt Power Schemes tab then configure the Power schemes field to Always On Some part of a game image is not displayed or is displayed in black This may happen when running a game designed for DirectX 8 1 such as NHL 2003 MVP Baseball 2003 etc The game screen is displayed small This may happen when the display settings are set to zoom out mode Use center output Change the settings as follows to fit the game screen to the LCD screen Right click over the Desktop and select Properties from the pop up menu In the Display Properties window select the Settings tab gt Advanced gt GeForce Go xxxx tab In the Digital Flat Panel Settings field select Display adapter scaling and click the Apply button Troubleshooting 137 Q6 Q7 QS 138 Users Manual The game play screen frequently stops and starts This may occur when the PowerMizer Setting is set to Maximum Power Saving Function or
107. mbers 0 to 9 or letters a to f Connecting to the Internet 69 7 Check that the configured network name e g samsung is in the Preferred networks item and click OK 4 Wireless Network Connection Properties S General Wireless Networks Advanced Use Windows to configure my wireless network settings Available networks To connect to disconnect from or find out more information about wireless networks in range click the button below View Wireless Networks Preferred networks Automatically connect to available networks in the order listed below Ce samsung Automatic Learn about setting up wireless network configuration C Y crea Now your wireless network setup has been completed Step 2 Connecting to the configured computer 1 Right click on the Wireless Network Connection E icon on the taskbar and select View Available Wireless Networks 2 Select the wireless network name e g samsung specified in Connecting to computer to computer networks peer to peer or ad hoc on page 68 and click Connect i Wireless Network Connection Choose a wireless network Network Tasks a Refresh network list Click an item in the list below to connect to a wireless network in range or to get more information 2 Set up a wireless network S samsung x e for a home or small office oP Security enabled computer to computer network This network requires
108. n and operation of devices it is necessary to carry out requirements of the user s guide Devices can be used only with the equipment specified in the technical specifications of the devices At operation of devices it is necessary to carry out the basic requirements At occurrence of malfunctions in the device a smell of burnt isolation a smoke etc it is necessary to disconnect the equipment from the power supply and to not to inserted back before reparation Service and reparation of devices should be carried out by experts of the manufacturer Technical director of the service center Replacement Parts and Accessories Use only replacement parts and accessories recommended by manufacturer Important Safety Information iii v To reduce the risk of fire use only No 26 AWG or larger telecommunications line cord Do not use this product in areas classified as hazardous Such areas include patient care areas of medical and dental facilities oxygen rich environments or industrial areas Battery Disposal meee Do not put rechargeable batteries or products powered by non removable J rechargeable batteries in the garbage Contact the Samsung Helpline for information on how to dispose of batteries that you cannot use or recharge any longer Follow all local regulations when disposing of old batteries Laser Safety All systems equipped with CD or DVD drives comply with the appropriate safety standards including
109. ng Bluetooth For more information about using the Bluetooth function refer to the online help of the Bluetooth Device Bluetooth Software Setup Bluetooth software is installed on computers supporting Bluetooth For first time use set up the Bluetooth software as follows 1 Right click the Bluetooth icon D on the bottom right Taskbar using the mouse or touchpad and select Start Using Bluetooth from the pop up menu Start Using Bluetooth 2 Click the Next button to start setting up In the setting up steps enter a device name to be displayed in the Bluetooth Manager program Enter a Name in the Computer Name field and select Laptop for the Computer Type field Also a step appears for selecting the services to be provided by your Bluetooth device for other Bluetooth devices At this point the program automatically detects available services and displays them as selected It is recommended not to change the default selection Bluetooth Service Selection Choose the services that this computer will offer To enable a service place a check in the box next to the service name To display the properties panel for a service click Configure 8 PIM Item Transfer cna formation Manager Configure notes and E amp PIM Synchronization 5 File Transfer Network Access Dial up Networking Bluetooth Serial Port Connecting to the Internet 87 If you change the service settings the driver necessary for the
110. nition time In this case the MS DOS command prompt is repeatedly switched to full screen and then to Windows several times Please press the lt Alt gt lt Enter gt keys more quickly or press the lt Alt gt lt Enter gt keys using the system keyboard Troubleshooting 123 Q11 A Q12 Q13 124 Users Manual When a TV is connected the Turn off monitor power option is not performed When connecting a TV after booting up your computer the Turn off monitor power option may not be performed For it to operate properly it is recommended to connect a TV and then booting up the computer Pressing the shortcut key on the keyboard does not show the Samsung Display Manager icon The Samsung Display Manager icon only appears when both the Magic Keyboard and the Samsung Display Manager program are installed The color is strange when the picture is displayed on the connected monitor or projector Check the monitor signal cable connection and reconnect the cable Sound Related Q1 A b How to install and uninstall the sound driver To install or uninstall the sound driver from this system please follow the procedures below Sound Driver Components The sound driver consists of the following 3 components and the 3 components are automatically installed during the installation High Definition Audio KB888111 Microsoft UAA Bus Driver for High Definition Audio SoundMAX SoundMAX Integrated Digital HD A
111. nnected An LCD screen displays thousands or millions of pixels Plug and Play A plug and play operating system automatically configures computer components to work with your system With this type of operating system you normally do not need to set jumpers on devices or set memory addresses or IRQs RAM random access memory The computer s system memory including conventional and extended memory You can write to and read from RAM Information stored in RAM is temporary and is erased when the system is turned off Refresh rate The refresh rate is the rate at which the image on the LCD screen is rewritten to the screen A fast refresh rate helps keep the image from flickering Resolution The resolution is the sharpness or clarity of the image on your LCD screen Resolution is measured by the number of pixels the computer s screen can display For example a resolution of 800 x 600 means that the screen can display 800 pixels in row and can display 600 rows The more pixels displayed the higher the resolution and the better the image ROM read only memory Permanent computer memory dedicated to a particular function For example the instructions for starting the computer when you first turn on power are contained in ROM You cannot write to ROM ROM is not the same as RAM Sector Also known as disk sector The portion of a track that is numbered and can hold a specified number of characters usually 512 KB 160 Users Manual
112. ntered in both the AP and the computer The network key is an encryption key for encrypting data transmitted between the AP and the computer It is recommended setting the network key manually Check the AP Settings A3 For the AP settings refer to the User s Guide provided by the AP manufacturer Verify whether the environment is suitable for using a wireless LAN The use of a wireless LAN may be restricted according to the environment and distance Obstacles such as walls or doors affect the use of a wireless LAN Install the AP in a high and open space 50cm from the wall and far removed from any other radio signal sources Troubleshooting 131 A4 A5 A6 A7 132 Users Manual Verify whether the AP is operating properly When the AP is not operating normally turn off the AP and after a short while turn it on again Verify whether the AP s firmware is the most recent version Contact the AP manufacturer or the place where you purchased the AP for details of the AP firmware Verify whether the AP has been properly connected to the network Verify whether the network is operating normally by connecting the wired network cable which has been connected to the AP to your computer Check the network key settings encryption key When automatic code conversion a passphrase function has been selected and data communication is not functioning even with a normal wireless connection it is recommended entering the
113. ny will notify the customer as soon as possible Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary The telephone company may make changes in its facilities equipment operations or procedures that could affect the operation of the equipment If this happens the telephone company will provide advanced notice in order for you to make necessary modifications to maintain uninterrupted service If trouble is experienced with this equipment Modem for repair or warranty information please contact your local distributor If the equipment is causing harm to the telephone network the telephone company may request that you disconnect the equipment until the problem is resolved The user must use the accessories and cables supplied by the manufacturer to get optimum performance from the product No repairs may be done by the customer This equipment cannot be used on public coin phone service provided by the telephone company Connection to party line service is subject to state tariffs The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device including fax machines to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission the date and time it is sent and Regulatory Compliance Statements xi an identification of the business
114. o get a program from the CD ROM device The program installation sequence assumes that the CD is drive d however this is not always the case The name of the CD ROM drive is the letter following the letter assigned to your last HDD For instance if you have one HDD with two partitions the HDD is drives C and D and the CD ROM drive is then drive E Touchpad Conventions You may be asked to click or double click on items on the display screen As a general note the touchpad actions act much in the same way as a wheel mouse any differences are explained fully The object that needs to be clicked upon will be displayed in Bold text or shown in a small figure such as the Start Button shown on the right gt Z Table 1 Touchpad Click Conventions Action Process Click Depress the touchpad left button and release Double click Quickly click the left touchpad button two times Windows Conventions Almost all Windows programs will display the name function of a button or icon if you place the touchpad pointer on the item you want information about Software User Documentation Your computer is shipped from the factory with several software programs installed The software may include its own online or printed documentation Refer to the documentation or the Help options in the software for more information Z Z 2 Users Manual The figures and illustrations in this manual may not be identical to those on your system
115. oint AP This section describes how to connect to an AP You can use the network when you are connected to an AP For more detailed information such as the network key encryption key ask your network administrator 1 Right click on the Wireless Network Connection E icon on the taskbar and select View Available Wireless Networks Change Windows Firewall settings Repair Open Network Connections q view Available Wireless Networks 2 Select an AP E g Test to connect to and click Connect If there is a configured network key for the AP to connect to the Enter Network Key window appears Enter the Network Key in the window and then click the Connect button i Wireless Network Connection Network Tasks Refresh network list 2 Set up a wireless network for a home or small office Related Tasks XD Learn about wireless networking fe Change the order of preferred networks p Change advanced settings Choose a wireless network Click an item in the list below to connect to a wireless network in range or to get more information A Test P Security enabled wireless network WPA This network requires a network key If you want to connect to this network click Connect Testi Security enabled wireless network WPA CU cornet Connecting to the Internet 67 When a network key is not defined for a selected AP click on Link to display the warning me
116. on field of the Connection Information tab as described above Troubleshooting 135 Q12 Q13 Q14 136 Users Manual For more detailed network authentication procedures ask your AP Access Point administrator After PROSet is installed The AEGIS Protocol IEEE 802 1x v2 2 1 0 appears in the Local Area Connection Properties window The AEGIS Protocol is a security authentication protocol that is automatically installed when PROSet is installed and does not affect the operation of other programs Although I have turned the wireless LAN off using the Off Button on the PROSet the wireless LAN operating light is still on This is normal The Off Button for the Wireless LAN on the PROSet only turns off the S W and not the H W for the Wireless LAN After installing the PROSet I cannot manage the wireless network under Windows Click on Use Microsoft Client in the Tools menu of the PROSet program to manage a wireless network in Windows To manage a wireless network in the PROSet program click on Use Inter PROSet Wireless in the Tools menu of the PROSet program Games and Programs Related Q1 A Q2 Q3 Q4 Q5 3D game is not executed or some functions are not working In the 2D or Software Renderer of the graphics option provided by the game change the related settings and run it again While playing a game pressing the lt Fn gt lt F4 S o gt Keys does not work or the screen is not proper
117. or other entity or other individual sending the message and the telephone number of the sending machine or such business other entity or individual The telephone number provided may not be any number for which charges exceed local or long distance transmission charges In order to program this information into your fax machine refer to your communications software user manual xii Users Manual Canada Unintentional Emitter per ICES 003 This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of Industry Canada Le pr sent appareil num rique n met pas de bruits radio lectriques d passant les limitesapplicables aux appareils num riques de Classe B prescrites dans le r glement sur le brouillage radio lectrique dict par Industrie Canada Intentional Emitter per RSS 210 Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4 GHz Band may be present embedded in your notebook system This section is only applicable if these devices are present Refer to the system label to verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in Canada if an Industry Canada ID number is on the system label As a general guideline a separation of 20 cm 8 inches between the wireless device and the body for use of a wireless d
118. ou backup all data on your hard drive Samsung is NOT responsible for any data loss 120 Users Manual Questions and Answers This section provides information on possible problems solutions and other references for system use Windows Related Q1 The system does not shutdown properly A When the system does not shutdown normally press and hold the Power button until the system manually shuts off If the Power Saving Mode is configured into the Power button press and hold for more than 4 seconds to shut the system off When the system is turned on after such manual shutdown Scandisk will run to check errors in the system Q2 The system freezes during program operation A1 There is an error with the program currently being used Press the lt Ctrl gt lt Alt gt and lt Delete gt keys simultaneously and click End Task in the Windows Task Manager window A2 There is an error with the Windows OS Reboot the system by using the Power button Troubleshooting 121 Display Related Q1 Q2 Q3 Q4 Q5 122 Users Manual The LCD screen is too dark or too bright Turn on the LCD backlight or adjust the screen brightness Press lt Fn gt lt F5 gt to turn on the LCD backlight or press lt Fn gt lt v gt lt Fn gt lt a gt to adjust the screen brightness The screen saver disturbs screen viewing during Media Player or video file operation Unselect Tools gt Options gt Player gt Allow screen saver
119. our password If you have forgotten your password v contact the Samsung service center 1 Select the Security menu in the System Setup To enter System Setup see Starting System Setup on page 95 2 On the Set Supervisor Password item press lt Enter gt 3 Enter a password press lt Enter gt re enter the password for confirmation and press lt Enter gt again 4 When a message confirming the password configuration appears in the Setup Notice window press lt Enter gt Setting the User Password You can configure user passwords so that other users can use the system configured Users can start the system with their user password but cannot enter into the System Setup Deactivating the supervisor password also deactivates the user password 7 Before configuring a user password a Supervisor password must have been On the Set User Password item press lt Enter gt and complete step 3 4 of Setting the Supervisor Password Customizing Your Computer 97 Activating the Booting Password Before activating the booting password the supervisor password must have 2 been configured Set the Password on boot option to Enabled From now on system booting will not proceed without the password Deactivating the Password 1 On the password to delete press lt Enter gt e g supervisor password 2 Enter the current configured password and press lt Enter gt 3 Leave the Enter New Password and
120. ovides DHCP the server may not allocate an IP address to the client properly and the client station cannot connect to the network Referring to A2 of Q1 check that the network key is correct Referring to Q4 check that AP is operating properly Q3 Al A2 I cannot share an Internet connection It may require some time to synchronize the computers to share an Internet connection after the Internet connection sharing configuration is completed If you cannot share Internet connection even after a longer period restart the computer Check if the connection between the network adapters is configured to bridge If there is a configured bridge connection between the network adapters through the network configuration wizard remove the network bridge and reconfigure the Internet connection sharing A bridge connection is created when you ran Network Setup Wizard from the Network Connections window and selected both the internal connection adapter and another adapter in the wizard Q4 Icannot connect to the AP Check the Computer Settings Al A2 Verify whether the wireless LAN function of the computer is on by doing the following If the wireless LAN function is off turn it on For Windows XP verify that the wireless network connection has been set to Enable in Start gt Control Panel gt Network Connections Check if the wireless LAN is turned on Verify whether the same network key encryption key has been e
121. pen The selected image file is registered to the Library and displayed in the Image Viewer window Viewing an Image in Full Screen or through a SlideShow Click the Full Screen M button or SlideShow Wo button below the Image Viewer window To return to the Image Viewer window press the lt Esc gt key or double click on the screen Watching a SlideShow while Listening to Music To watch a SlideShow while listening to music play music from MUSIC Station and run SlideShow Setting an Image as the Background Click the Set as Background fE button below the Image Viewer window The selected image is set as the Desktop background Using the Computer 47 Editing an Image You can change the shape of an image edit an image or apply special effects to an image The image editor functions are described below 1 Select an image to edit in the Image Viewer window and select the Image Editor tab The Image Editor screen appears The Image Editor screen consists of an Image Workspace window and 3 Tool tabs Gel AVStation Edit Image Image Workspace Zoom In Zoom Out Tool Tabs 2 Edit the image using the Shape Edit and Effect tools Shape tool Change the shape of an image through cut resize Edit tool Draw a line add some clip art or enter letters Effect tool Apply various effects to an image 3 When finishing editing an image click the Save Edited Image I button below the Image Editor window
122. pill liquid on the keyboard drain as much of the liquid from the keyboard as possible Be careful not to let the liquid drip onto the LCD panel Allow the system to dry for several days before trying to use it o Ifyou spill liquid on an external keyboard or keypad unplug it and drain as much of the liquid as possible Allow the keyboard to sit at room temperature for a full day before trying to use it System Management 117 Sweet liquids leave a sticky residue that may jam the keyboard despite your b efforts to dry it o If you spill liquid on the LCD panel clean it immediately with a soft cloth and denatured alcohol or a proprietary LCD screen cleaner Do not use water window cleaner acetone aromatic solvent or dry rough towels to clean it Some liquids damage the polarized LCD screen If your screen is damaged b contact your authorized manufacturer s service center for a replacement storing the Computer for Long Periods If you will not be using the computer for a long period of time a month or more you should discharge the battery completely then remove the battery from the computer This extends the life of the battery 118 Users Manual Troubleshooting Complete the following in the order presented until your system is functioning properly If all of the steps below fail then contact your local reseller for assistance gt Questions and Answers Please see Questions and Answers on page 121 for assistance in
123. r De Publish this Folder to the Web 5 Click Write these files to CD Using the Computer 27 5 Click Write these files to CD in the CD drive window 6 When the CD Writing Wizard appears enter the CD label and click Next The data begins copying 7 When copying is completed a completed message appears and the CD drive window opens automatically For more information on writing CDs Z Click Start gt Help and Support Type CD copy in the search field and click the Search icon ED select Help gt Windows Media Player Help Select Using the Player gt Using CDs DVDs and VCDs gt Using CDs gt Burning your own CDs gt To burn your own CD to see detailed information To Burn an Audio CD ZA Run Windows Media Player and right click over the Function Taskbar and 28 Users Manual Enjoying Home Theater S PDIF Port Your computer supports 5 1 channel output which is a basic function for home theater systems and DVD drives It provides 3D surrounding sound and vivid screen What is a home theater system Home theater system usually consists of a TV DVD 5 1 channel speaker and digital amp and provides a high resolution screen MPEG2 and 3D Surrounding sound Dolby 5 1 or DTS With a home theater system you can enjoy a vivid screen and sound in your home as if you are in a movie theater The following devices are required to enjoy a home theater system 5 1 channel speaker system amplifier soeak
124. r an MPEG file is only displayed on the LCD Video is displayed on a single display device by default when LCD and CRT are selected simultaneously Right click over the Desktop and select Properties from the pop up menu In the Display Properties window select the Settings tab gt Advanced gt GeForce Go xxxx tab Select the Full Screen Video menu gt Full Screen Video Control item set the Full Screen Device to Auxiliary Display and then click the Apply button Then you can view video on both the LCD and CRT display devices After connecting to a TV some programs such as Debug Mem etc do not run in full screen MS DOS mode If a TV is used as the display device some programs such as Debug Mem etc may not run properly in full screen MS DOS mode Run the programs in the MS DOS window The Taskbar on the bottom of the screen does not appear when a projector is used as the display device This may happen because while WXGA and WSXGA LCD support 1440x900 and 1680x1050 modes respectively the projector does not support these modes In this case change the resolution to 1024x768 recommended on your computer Switching the MS DOS command prompt to full screen mode or Windows mode by pressing the lt Alt gt lt Enter gt Keys does not operate properly Pressing the lt Alt gt lt Enter gt keys using an USB keyboard may cause the key input to be recognized as multiple key inputs depending on the keyboard input recog
125. r restarting the system during the Windows installation Enter the password to continue to the next steps Reinstalling Windows Explain Standard installation option as a standard 1 Insert the system recovery CD into the CD ROM drive 2 In the initial screen click Standard Installation Samaung System Recovery CD In case of system failure Windows can be tasily recon using the Syolem Hecovery CO System Hecovery CD iv a recovery tool provided by Samsung Computers Alter installing Windows install the drivara and the applications ising the Symem Solwa CD Waming Peine preceeding bark up any important dmim am ii limn I E enn gel bwal during imelalinlira Troubleshooting 149 e Standard installation You can change the settings for partitioning the installation folder etc during the Windows installation However reinstalling Windows may delete the data on the hard disk drive such as files programs etc In order to minimize damage from data loss please remember to always back up data Quick Installation This re installs Windows with the user data and the system configuration intact The user data in the already existing Windows folders may be preserved as the existing Windows folders are overwritten 3 The description for the standard installation appears Click Yes The installation starts and the system will be restarted after a while When Quick Installation is selected Setup proceeds with St
126. r to the top left in the current screen and click the AVStation icon FSF 7 To move to the start screen while using the program press the AVS 44 fa Using the Computer 57 Using the Remote Control The basic uses of the remote control are described below For more detailed information on the button functions refer to Using the Remote Control Optional on page 18 Ki Z A remote control is optional and is only provided for some models e Starting the Program Click the AVS button on the remote control Press the AVS button to move to the start screen while using the program e Moving to an Item Press the Direction buttons on the remote control to move to an item Selecting or Running an Item When an item is selected press the ENTER button on the remote control e Moving to the Previous Screen Click the BACK button on the remote control Exiting the Program 1 Press the AVS button on the remote control to move to the start screen 2 Press the button to move to the Exit button E and press the ENTER button In AVStation now you can also exit the program by pressing the Power Standby button on the remote control MUSIC Station The procedures to play a music file or an audio CD are described below Playing a Music File The procedures to play a music file registered to the MUSIC Library are described below For the procedures to register files refer to p45 1 Launch AVStation now and c
127. re an additional program for wireless LAN connection is not required unless the network requires a specific program However installation of some wireless LAN related programs may sometimes disable the View Available Wireless Networks window supported by WZC service Exit the wireless LAN related program then check whether the window is enabled Initialize the device driver Click Start gt Control Panel gt Performance and Maintenance gt System gt Hardware tab gt Device Manager gt Network adapters and select the wireless LAN adapter Right click the network adaptor and select Disable Then right click over the network adaptor and select Enable after a short wait to check that the device is operating properly Right click the My computer icon and select Manage When the Computer Management window appears double click Services and Applications on the left and then click Services from the sub menu tree Select the Standard tab in the right pane double click Wireless Zero Configuration and check that Startup Type is configured to Automatic and the Service status is Started In the case of Windows XP click Advanced in the Wireless Network Connection dialog box see Connecting to an Access Point AP p67 and make sure that Use Windows to configure my wireless network settings is selected This may happen when a third party wireless network setup program e g PROSet other than Windows XP default program is inst
128. re Center 08 25 08 65 65 Web Site www samsung fr GERMANY Kontakt zu Samsung Falls Sie Fragen oder Anregungen zu Samsung Produkten haben wenden Sie sich bitte an den Sam sung Kundendienst Customer Care Center 01805 121213 Web Site www samsung de SPAIN Contacte con SAMSUNG WORLD WIDE Si tiene alguna pregunta o comentario referente a nuestros productos por favor contacte con nuestro Servicio de Atencion al Cliente Customer Care Center 902 10 11 30 Web Site www samsung com es PORTUGAL Contacte SAMSUNG GLOBAL Se tem algumas dbvidas ou coment6rios sobre os produtos Samsung contacte por favor a nossa linha de apoio a clientes Samsung Customer Care Center Z 808 200 128 Web Site www samsung pt RUSSIA UKRAINE CBx3bipantecb c SAMSUNG no Bcemy mupy Ecnu y Bac ecTb npegnoxeHna nu BONpocb No nposAyKTam Samsung CBA3bIBaNTeCb C UHCDOPMALIMOHHbIM LIEHTPOM Samsung Customer Care Center RUSSIA 8 800 200 0400 Web Site www samsung ru Customer Care Center UKRAINE 8 800 502 0000 Web Site www samsung com ur CHINA 22PRARS A MREMHSHRALTAOREY PRR SSL Customer Care Center 800 810 5858 010 64751880 Web Site www samsung com cn Thailand Aagadiuasisutlad Gadadtuaaviulad winidruusiivsadaavdeAenundasauntuas dasiadauai lan SAMSUNG customer care center Customer Care Center Z 1800 29 3232 02 689 3232 Web Site www samsung com th Rev 1 0
129. re point The procedures to return your computer to an earlier restore point when a problem has occurred are described below 1 Click Start gt All Programs gt Accessories gt System Tools gt System Restore 2 Select Restore my computer to an earlier time and then click Next Sytem Rostera Welcome to System Restore Tingen wee Syren Meirg bourdo barat charr be pour compuber and recbore s sethings and perficrmance Sya BARDHE PUN vous caia be an eaii Hive To begin arire Ehr bask biaa you wal bo perlar caied a reshore pori rathout causing pou to lose recent work cuch ot caesar dumani r or DHr are Restore m OAR be ary eee ber tires Favorites bets x reste a restore point Any changes Wal Sytem Pieshone nahri he yir coeur ae Compketeby nese sible Your coMmpuber wubomahcsly crestes reshore poris pesked fps iaia beat pou Car Aled a fraa ethane b baba yar Geen polis The i edu E pa ane shout bo make a major change bo your spsten such as ILA A ew fron or char pou rey eae Eiba ittini To ppi ai an gia rd Uber chek Heat 3 Select the desired restore date from the calendar restoration and select the desired restore point from the list and then click Next Syrte Rosters Select a Restore Point Thes Eyl caai cheapo if bee ofl of Eha daig hat Pores reghore pets avoids Thee bet digla ee reshore peants that ene avedabbe for the selected date Ponsble types of remor paints aver system checkpowi
130. red This may be caused by channel interference Change the channel of the AP and reconnect This may be caused by selecting the Use IEEE 802 1x network authentication option when IEEE 802 1x authentication is not available Check the properties of the AP in the wireless network settings If the Use IEEE 802 1x authentication in this network option is selected deselect the option on the Authentication tab For more detailed information about authentication server ask your network administrator If the AP is configured to Use network authentication Shared Key If the AP is configured to authentication shared mode all computers to be connected should be configured as follows If you are using Windows XP select network authentication shared mode in the wireless network settings Select Start gt Control Panel gt Network and Internet Connections gt Network Connections right click the Wireless Network Connection icon and then select View Available Wireless Networks Select Change Advanced Settings from the left menu select an AP from Preferred networks window in the Wireless Networks tab and click the Properties button Select Shared Mode in the Network Authentication field of the Association tab and then click the OK button If the Preferred networks window in the Wireless Network tab is empty click View Wireless Networks select an AP to connect to and select Shared Mode in the Network Authenticati
131. resent Refer to the system label to verify the presence of wireless devices Wireless devices that may be in your system are only qualified for use in the United States of America if an FCC ID number is on the system label The FCC has set a general guideline of 20 cm 8 inches separation between the device and the body for use of a wireless device near the body this does not include extremities This device should be used more than 20 cm 8 inches from the body when wireless devices are on The power output of the wireless device or devices which may be embedded in your notebook is well below the RF exposure limits as set by the FCC This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter Operation of this device is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device Wireless devices are not user serviceable Do not modify them in any way Modification to a wireless device will void the authorization to use it Contact manufacturer for service FCC Statement for Wireless LAN use While installing and operating this transmitter and antenna combination the radio frequency exposure limit of 1mW cm2 may be exceeded at distances close to the antenna installed Therefore the user must maintain a minimum distance of
132. rightness and Key Key Volume Adjustment Direction Keys The keys on the keyboard can be grouped into the following categories Full sized Alphanumeric typewriter keys are arranged like a standard typewriter keyboard and are used for text entry The Windows keys on either side of the spacebar open Windows menus and perform other special functions Function keys when pressed together with the lt Fn gt key enable special functions e Cursor and Screen control keys move the cursor They may perform other functions depending on your software To clean the computer keyboard use slightly damp cotton swabs Scrub the keys and the surface around the keys Do not allow liquid to drip into the keyboard or you may damage the keyboard Getting Started 9 Using the Numeric Keypad Your keyboard includes a numeric keypad which is a group of keys that you can set to type numbers and mathematical symbols such as the plus sign A number or symbol on the corner of each keypad key shows its numeric function 7 8 9 0 Li P I 5 g 5 P N J K 2 j 3 s Num Lock LED M E Press lt Fn Num Lock gt to turn on the embedded numeric keypad The numeric functions of the keypad are enabled and the Num Lock LED turns on Reading the Status Indicators on page 15 for the location of the Num Lock LED While the numeric functions are enabled you can temporarily return a key to its normal function by pressing the key and the lt Fn gt k
133. rk key encryption key you have to use the same network keys for an AP Access Point or a computer to computer network Ad Hoc The network key of the AP is configured in the AP management program Ask your network administrator or AP manager for more detailed information Check that the device driver is properly installed If the driver is not properly installed you will find a yellow exclamation mark on the network icon by clicking Start gt Control Panel gt Performance and Maintenance gt System gt Hardware tab gt Device Manager gt Network adapters gt Wireless LAN adapter If there is a yellow exclamation mark please reinstall the device driver with the system software Media Referring to A2 of Q3 Check that the network bridge configuration is correct The signal strength is excellent but I cannot connect to the network Even if the signal strength is excellent the network connection may not operate properly if the TCP IP properties are not properly configured or the network key encryption key is incorrect Check that the TCP IP properties are configured properly When you connect to an AP click the Wireless Network Connection icon on the taskbar and select the Support tab If the IP is not allocated properly the IP address will be displayed as follows e g 169 254 xxx xxx If the network does not provide DHCP you have to specify the correct IP address by asking your network administrator Even if the network pr
134. rom being installed when connected to certain Web sites for security reasons On some Web sites that have no ActiveX controls installed applications are not started or do not display properly In this case to install ActiveX controls right click the notification area to display a menu from which you can select Install ActiveX control Troubleshooting 139 Q3 Al A2 A3 A4 140 Users Manual When you see a Windows Security Alert icon ED appear on the right part of the task bar With the Security Center feature added Windows XP SP2 checks the Firewall the automatic updates configuration and installation of virus checking programs to display a Windows Security Alert icon on the right part of the task bar when it judges that the computer is vulnerable to attacks from the Internet In this case check the following to install the necessary components Set up the Windows Firewall When you set up the Windows Firewall you will be protected from unauthorized access through the Internet or the network Click on Windows Firewall in Start gt Control Panel gt Security Center gt Manage security settings for From the General tab of Windows Firewall select ON recommended If you want to allow a certain program or service to gain access to your computer using the Firewall select and check the program or service that you want to allow access from in the Exceptions tab of the Windows Firewall If you want to add a program
135. ry s power system The appliance coupler must meet the mechanical configuration of an EN 60 320 IEC 320 Standard Sheet C7 connector for mating with appliance inlet on the computer Important Safety Information v Regulatory Compliance Statements Wireless Guidance Low power Radio LAN type devices radio frequency RF wireless communication devices operating in the 2 4 GHz Band may be present embedded in your notebook system The following section is a general overview of considerations while operating a wireless device Additional limitations cautions and concerns for specific countries are listed in the specific country sections or country group sections The wireless devices in your system are only qualified for use in the countries identified by the Radio Approval Marks on the system rating label If the country you will be using the wireless device in is not listed please contact your local Radio Approval agency for requirements Wireless devices are closely regulated and use may not be allowed The power output of the wireless device or devices that may be embedded in your notebook is well below the RF exposure limits as known at this time Because the wireless devices which may be embedded into your notebook emit less energy than is allowed in radio frequency safety standards and recommendations manufacturer believes these devices are safe for use Regardless of the power levels care should be taken to minimize
136. ry charge status by completing the following procedures To use the shortcut key to view If you press the lt Fn gt lt F2 c gt key combination on the keyboard the remaining battery charge appears on the screen for a while It appears only when the Samsung Display Manager program is installed on your computer To view on the battery Press the PUSH button on the battery The remaining battery charge will be displayed Push button System Management 109 To view through the Control Panel Select Start gt Control Panel gt Performance and Maintenance gt Power Option gt Power Measure tab Then you can view the current power source and the current remaining battery charge Power Options Properties Power Schemes Alarms Power Meter Advanced Hibernate Power status 110 Users Manual Current power source AC power Total battery power remaining 100 Power Supply Status Remaining Battery Charge Click an individual battery icon for more information Using the battery Battery is an expendable supply so when you use it for a long time the capacity battery life is shortened If the battery life is reduced to under half of the initial time we recommend that you purchase a new battery to use Battery Warning You will hear an alarm when the remaining battery charge is under 10 Connect the power cable or turn off the computer and install a fully charged battery When the remaining battery charge i
137. rystal display The LCD screen on your computer differs from the display screen of a desktop monitor Most desktop monitors use CRT cathode ray tube displays which work by moving an electron beam across phosphor dots on the back of the screen The phosphor dots light up to show the image LCDs use a liquid crystal solution between two sheets of polarizing material Electric current passing through the liquid aligns the crystals so that light can or cannot pass through them creating an image MB megabyte 1 024 kilobytes Megabit 1 048 576 bits or about 128 kilobytes Operating system A program that supervises the computer s operation including handling I O Application programs and users can request operating system services A user might request operation system services to copy files or format a disk An application program might use the operating system to obtain keyboard input write data to a file or write data to a screen Glossary 159 PC Card PC Card stands for personal computer card The Personal Computer Memory Card International Association PCMCIA defines the standards used to develop all PC Cards PC Card types include modems Ethernet adapters SCSI adapters ATA cards and memory cards PC slot The PC slot is the hardware slot in the computer where the PC Card is placed Pixel A pixel is an individual dot in a graphic displayed on your computer The pixels are so close together that they look as though they are co
138. s should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal WEEE SYMBOL INFORMATION xix Using Your Documentation Congratulations on your purchase of a notebook computer with the Windows XP operating system Whether you are new to using a portable computer or are an experienced user this user s manual can help you get the most from your computer Manual Documentation Conventions Information Icons Three icons and their associated messages appear in this manual The information icons are placed before the step information they apply to NEY Warning Es Indicates the possibility of personal injury Caution Warns you of possible damage to equipment or data Informs you of special circumstances b yt Technical Information Informs you of special requirements or limitations for use of item s XJ CR Keyboard Conventions Keys that you need to press to perform certain functions are displayed in the manual in brackets For example lt Ctrl gt indicates the control key Ctrl on the keyboard If you need to press two keys at the same time the key names are shown joined by a plus sign For example lt Fn F8 gt means that you should press the Fn key and hold it and then press the F8 key Using Your Documentation 1 CD ROM Device Naming Convention In many installation programs you will have t
139. s under 3 the computer automatically saves current work and turns off This may be different according to the settings in Control Panel gt Performance and Maintenance gt Power Options gt Alarms tab Extending the battery use time Decreasing the LCD Brightness Decreasing the LCD brightness by pressing the lt Fn gt lt gt key combination on the keyboard or adjusting the brightness in the Battery Manager program extends the battery use time Decreasing the LCD brightness by one level extends the battery use time by 3 5 10 20 minutes The battery use time is determined by the corresponding model Using the Battery Manager Battery Manager is a power management program that enables using battery power efficiently You can easily change the power mode by selecting an optimized power mode and manually optimizing the battery use time by setting each option Click on Start gt All Programs gt Samsung gt Samsung Battery Manager gt Samsung Battery Manager Wy Eamsung Batlors Managor 2 0 Fiar Mogae Opsans Change Power Mode Power Saving LOG Brightness Management Effects LOO Brighhness Level LOD Auto dirninniineg at 7 ater 2 mins You can only change the oc detailed configuration in Dutaded Device Sutting Custom Mode CPU Speod I Miimu pain Minimum Fenonnance Colon Highesiisibip Medumitiibm Graphic T Homma f Poweroving Power Schemes e Maximum Battery Saving Mode This mode
140. se time may be reduced by the difference between the actual battery charge and the remaining charge display In this case the actual battery charge and the remaining charge display will be same by discharging the battery completely using the Battery Calibration function and then recharging it again 1 Disconnect the AC power adapter after turning off the system Restart your computer and press lt F2 gt to enter BIOS setup 3 Using the arrow keys highlight Smart Battery Calibration in the Boot menu The Battery Calibration function is activated and the battery is discharged forcibly This operation requires 3 5 hours depending on the battery capacity and the remaining battery charge 4 When the calibration process is complete recharge the battery fully 112 Users Manual Upgrading Memory This computer has one or more memory module s Two memory module sockets are provided so that you can replace memory or install an additional memory module Removing the memory module completely and remove the battery and AC adapter Do not replace the memory module when the system is in Standby or Hibernation mode When using memory in dual channel using memory of the same specification the same capacity and manufacturer is recommended v Before removing or replacing the memory module turn the system off 1 Using a screwdriver open the memory module compartment cover on the bottom of the computer Screw 2 Push the memory modu
141. se pE Yew Feast Joo Help MENU Bar Close Button a Search Fokiers mh adrest I My Comnter 3 Ele Maximize Button Fides Stored on This Comigeusber P a Syatern Nagke Minimize Button a Yew pertam information Pa p Shand Domani Ty Add Oe riire peog aiis el eee dene Hard Disk Drives Other Places a Lisal Deut 5 Quick Task f SS memor rice ee Window oi dene EJ Shared Documents Devices with Removable Storage Ge Control Panel Folders ba f r WD Dra DI ma DD Orrea 000 Files Drini My Compiler system Polder Double click Shared musie Documents or Look Into The Eyeball Local Disk You can see files and folders Double click the hard drive local disk to view internal folders and files stored in it If the contents do not appear click Show the contents of this folder What is a drive A storage device in which files and folders are saved in and read from What is a folder A folder is used to group and manage files systematically and may include files in sub folders It is similar to a bookshelf What is a file A file is a document or various kinds of material that is generated as a result of program operation It is also called data To view the entire structure of the drive Click the Folder icon in the taskbar to view the entire structure Click again to return to the Quick Task Window 22 Users Manual Help and Support Center Help and Support Center provid
142. set to use DTMF signaling for access to is Regulatory Compliance Statements xvii public or private emergency services DIMF signaling also provides faster call setup This equipment has been approved to Council Decision 98 482 EEC CTR 21 for Pan European single terminal connection to the Public Switched Telephone Network PSTN However due to differences between the individual PSTNs provided in different countries the approval does not of itself give an unconditional assurance of successful operation on every PSTN termination point In the event of problems you should contact manufacturer Technical Support xviii Users Manual WEEE SYMBOL INFORMATION Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business user
143. ssage box Then click Connect again in the box Now when Connected in AP is displayed and you can access the network Checking the connection status Move the mouse pointer over the Wireless Network Connection mu icon on the taskbar and the connection status is displayed Wireless Network Connection t Yw 3 Speed 11 0 Mbps Signal Strength Excellent Status Connected Connecting to computer to computer networks peer to peer or ad hoc In computer to computer wireless networks you can wirelessly connect 2 or more computers that have wireless LAN modules Using this method a computer that is not connected to the Internet can share the Internet by accessing another computer connected to the Internet Refer to Sharing Internet Access on page 77 You can connect by completing the following steps Step 1 Set up a computer to computer network on a computer Step 2 Connect to the configured computer from other computers Step 1 Setting up a computer to computer network 1 Right click on the Wireless Network Connection E icon on the taskbar and select View Available Wireless Networks z Change Windows Firewall settings Open Network Connections iew Available Wireless Networks D ee an V my eJ 68 Users Manual Click Change the order of Preferred Networks i Wireless Network Connection Network Ta Choose a wireless network q Refresh network list Click an item in the list below
144. t will operate to the users satisfaction Before installing this equipment users should make sure that it is permissible to be connected to the facilities of the local telecommunications company The equipment must also be installed using an acceptable method of connection In some cases the inside wiring associated with a single line individual service may be extended by means of a certified connector assembly The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier Any repairs or alterations made by the user to this equipment or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment Users should make sure for their own protection that the electrical ground connections of the power utility telephone lines and internal metallic water pipe system if present are connected together This precaution may be particularly important in rural areas To avoid electrical shock or equipment malfunction do not attempt to make electrical ground connections by yourself Contact the appropriate inspection authority or an electrician as appropriate The Ringer Equivalence Number REN assigned to each terminal device provides an indication of the maximum number of terminals allowed to be conne
145. tall the driver and program using the system software Media This computer is optimized for Microsoft Windows XP therefore drivers for other operating systems are not included on the System Software Media Running the system software Media Insert the system software Media into the CD ROM drive The initial screen appears automatically 2 SU SS STEM SOFTWARE MEDIA om z What is SYSTEM SOFTWARE MEDIA Standard Installation Minimurn Installation Custom Installation SYSTEM SOFTWARE Media is a CD DYD thatis proviced by Samsung Computers to enable the easy re installation of drivers and software in case of a system crash The required system software is notinstalled properly Press Standard Installation recommended or Minimum Installation and continue with the software installation e Standard Installation This displays a list of drivers or programs that are not currently installed on your computer from the system software Media provided All necessary components are installed using the factory defaults e Minimum Installation This displays the components driver Windows programs etc that if not installed may cause problems with the system performance You can install only required components Custom Installation You can customize the installation of drivers and programs Troubleshooting 147 Installing drivers and programs 1 Click Standard Installation in the main window of the
146. touchpad button on the memory card drive and select Format from the pop up menu 3 Click Start to start the format operation To use a memory card in both the computer and other digital device such as digital camera it is recommended to format the memory card in the digital device If you format the memory card in the computer you may have to format the memory card in other digital device again to use the memory card in the digital device 34 Users Manual Using the PC Card Slot Various different functions can be added by inserting PCMCIA cards into the system This system supports 16 32 bit type I or I PCMCIA card types Ki The PC card slot does not support a ZV card or a PCMCIA III card To insert a PCMCIA card b Before using the PC Card slot remove the slot protector Push the eject button of the PC card slot once to pop it out Push the button again to eject the slot protector 1 Insert a PCMCIA card into the PC card slot on the side of the computer b Ensure that the PCMCIA card is inserted the correct way as incorrect insertion will damage the PC card slot Eject Button 2 Windows automatically installs the necessary driver for the card If there is no available driver found by Windows you have to install the driver using a disk supplied with the card Using the Computer 35 To remove a PCMCIA card 1 PS 36 Users Manual Double click Safely Remove Hardware icon i on the taskbar
147. ts scheduled restore points crested by your computer au eviore pod neice paid Creabedd by you acd edad redtore peo oes pede pet cheated Wher IHREN prey ane ane reied 1 On thi calerebar click bobl date P his eel lek a eeehorr pin E hab 2004 NF aby PODS 4 s 4 7 E 13 wd arj ej aaj 20 7 1 es zal za 26 E al The date of the restore point is displayed in bold font Troubleshooting 145 4 Confirm the selected restore point and click Next System Restore shuts down Windows and starts the restoration processes 5 After the restoration is complete Windows restarts In the System Restore completed dialog click OK Your computer has been restored to the selected restore point Undoing the last restoration The procedures to undo a restoration are described below 1 Click Start gt All Programs gt Accessories gt System Tools gt System Restore 2 Select Undo my last restoration and then click Next 3 Confirm the restoration information to undo and than click Next System Restore shuts down Windows and starts undoing the restoration 4 After the undo restoration is complete Windows restarts In the Undo the last restoration completed dialog click OK Your computer has been restored to the point prior to the last restoration 146 Users Manual Reinstalling Software If you have reinstalled the Windows operating system or the system and program do not operate properly you can re ins
148. ts posed by the safety directors of such environments The use of wireless devices on airplanes is governed by the Federal Aviation Administration FAA The use of wireless devices in hospitals is restricted to the limits set forth by each hospital Antenna use In order to comply with FCC RF exposure limits low gain integrated antennas should be located at a minimum distance of 20 cm 8 inches or more from the body of all persons High gain wall mount or mast mount antennas are designed to be professionally installed and should be located at a minimum distance of 30 cm 12 inches or more from the body of all persons Please contact your professional installer VAR or antenna manufacturer for proper installation requirements Explosive Device Proximity Warning Do not operate a portable transmitter such as a wireless network device near unshielded blasting caps or in an explosive environment unless the device has been modified to be qualified for such use Antenna Warning To comply with the FCC and ANSI C95 1 RF exposure limits it is recommended for Intel PRO Wireless Network Connections installed in a desktop or portable computer that the antenna for this device be installed so as to provide a separation distance of al least 20 cm 8 inches from all persons and that the antenna must not be co located or operating in conjunction with any other antenna or radio transmitter It is viii Users Manual recommended t
149. twork is not properly connected Using the Network This section describes the procedures to connect to the Internet by setting up a network The setting up procedures include the procedures to add a printer to the network The setting up procedures are different for wired and wireless LAN ws connections To use a wireless LAN there should be a wireless LAN AP available nearby Setting Up a Network 1 To use a wired LAN connect the LAN cable to the LAN port To use a wireless LAN press the lt Fn gt and lt F8 gt key combination simultaneously to enable a wireless LAN When the wireless LAN is turned on the Wireless LAN Operation LED a 1 lights up Connecting to the Internet 73 2 Run Samsung Network Manager Select Start gt All Programs gt Samsung gt Samsung Network Manager gt Samsung Network Manager or double click the Samsung Network Manager A icon on the Desktop 3 Click the Add button 4 Select a network location icon and enter the name of the location e g Home Click the Next button 5 Select Internet direct connection and click the Next button Add Location 2 Select the Internet connection type Select the Internet connection type Sharing Client Sharing Client Sharing Server Wireless Wired __ 6 Select the LAN device setup the IP address and click the Next button Add Location 3 Internet Connection Device Setting Please enter IP address after choosing
150. uchpad as described below Action Move A ll ee Click ZZ iL a Double Click E is EEEN Right Click Drag E md ee Function Move the pointer Select an object open a menu or execute a button Launch a program or open a file Display a short cut menu Move an object or select an area or multiple objects Process Place your finger on the touchpad and slide your finger to a destination Place the pointer over an object then press left touchpad button once Or place the pointer over an object then tap the touchpad once with your finger Place the pointer over an object then quickly press left touchpad button twice Or place the pointer over an object then quickly tap the touchpad twice with your finger Place the pointer over an object then press right touchpad button once Drag and drop a part to the required place Getting Started 13 Action Scroll Function Process Display upper lower left right part Place your finger on the right edge of the content within a window or bottom edge of the touchpad and move vertically or horizontally Applicable to certain programs only all a 14 Users Manual Please use the touchpad only with your finger Using sharp devices may damage the touchpad Operating the touchpad or touchpad button while starting your system may increase the time required for starting Windows Reading the Status Indicators Shows the oper
151. udio WOW XT and TSXT Filter Driver SRS Uninstalling the Sound Driver To remove the sound driver due to a problem or for an update follow the procedures below If you do not follow the sequence below the sound driver may not be removed or the reinstalled driver or may not work properly 1 Select Start gt Control Panel gt Add or Remove Programs 2 Remove WOW XT and TSXT Filter Driver first 3 Remove SoundMAX and restart the computer Do not remove the High Definition Audio item Removing this item also removes the modem device driver If you have removed this item you need to install the modem device driver again Reinstalling the Sound Driver If there is an already installed sound driver uninstall the driver according to the procedures above The sound driver is included on the System Software Media 1 Insert the System Software CD ROM into the CD ROM drive 2 Select the Sound Driver on either Standard Installation or Custom Installation then the 3 components of the sound driver are automatically installed Troubleshooting 125 4 126 Users Manual Installing the Sound Driver after a Windows XP Reinstallation If you install the sound driver after reinstalling Windows XP the Add Hardware Wizard Modem Device window may appear during the sound driver installation This happens because the High Definition Audio KB888111 Hotfix which has been installed on your system has changed the settings to searc
152. ur model lt F9 Ea gt Touchpad Turns the touchpad function on and off lt F10 gt lt F11 Num Lock gt lt F12 Scroll gt lt U gt lt gt gt lt Ha gt lt gt Etiquette Mode Number Lock Scroll Lock Volume Down Volume Up Brightness Up Brightness Down You can select Etiquette Mode when you need a tranquil work environment Enables the numeric keypad p10 Scrolls the screen up and down while the cursor position does not change in some applications Decreases the audio volume Increases the audio volume Makes the LCD screen brighter Makes the LCD screen dimmer Getting Started 11 Using the Touchpad In Windows you always see a small graphical image on the screen that indicates the location where you can take the next action This image is called a pointer and is usually displayed in arrow shape or T shape I Touchpad gt lt gt Touchpad Buttons The touchpad on your computer allows you to move the pointer on the LCD screen just like a mouse that is used with a desktop computer The touchpad buttons allow you to take actions with the pointer such as selecting an item or executing a command Locking the touchpad Z You can lock the touchpad and use only the keyboard and mouse To lock the touchpad function press the lt Fn gt lt F9 gt key combination 12 Users Manual You can perform various actions with your to
153. usic file or an audio CD PHOTO You can view or edit a photograph image and also view the photographs through a SlideShow Using the Computer 41 MOVIE You can play a video movie file or a DVD VCD title MUSIC Station Launch AVStation premium and click MUSIC on the Station Bar Eel AN Station a Music ei MUSIC Menu Bar Station Bar MUSIC Library Register a File Playlist Q Playlist Control Buttons Play Control Buttons Volume Control Play Options EDS Setting Button What is EDS Enhanced Digital Sound EDS Enhanced Digital Sound is a sound quality enhancement technology developed by Samsung Electronics You can listen to clearer sound if you enable the EDS function when playing music or video on AVStation premium 42 Users Manual Playing an Audio CD The procedures to play an audio CD are described below 1 Launch AVStation premium and insert an audio CD into the CD drive 2 Inthe Audio CD window select Play Audio CD using Samsung A VStation and click the OK button Audio CD D Windows can perform the same action each time you insert a disk or connect a device with this kind of file 69 Music CD What do you want Windows to do Rip music from CD usi ng Windows Media Pl ayer Play audio CD using Windows Media Player a Play Audio CD Peers using PowerDYD C gt gt Open folder to view files Mi C Always do the selected action 3 Th
154. very Launches the Restoring the System function of Windows XP p143 3 When the system diagnosis is completed the diagnostic result appears If problems are found click the Cure button to correct the problem Magic Doctor starts the correction operations 142 Users Manual Restoring the System This description is only for models running Window XP The System Restore function allows you to restore your computer to an earlier copy called restore point and restores the settings if a problem occurs The System Restore function is provided by Windows XP to enable the resolution of various problems without reinstalling Windows XP completely You can use System Restore in the following cases e The system files are deleted or damaged by mistake e The system is unstable or a problem occurs in a device driver e A problem occurs after changing system files such as the registry A problem occurs after installing a new program Creating a Restore Point Restore points are created at predetermined times and at times of significant system events such as when a program or a driver is installed You can also decide when to create your own restore points space is insufficient a saved restore point might be deleted You are recommended to create a restore point when you have purchased a new computer and before installing new programs or device drivers Before creating a restore point check that the computer is operating properl
155. volume level in the volume control program fi Volume Control Options Help Volume Control Wave Sw Synth Line In Balance Balance Balance Balance gt oY dey 4 Volume Volume Volume ES Ea When you turn the system on a booting noise may occur Getting Started 17 Using the Remote Control Optional Using the remote control for the computer is described below To use the remote control install the supplied battery into the remote control first Installing Battery Move the groove O on the cover to the position by using a coin and open the battery cover To open the cover turn it counterclockwise Insert the battery so that the positive pole of the battery is towards the inside of the cover Move the groove 4 on the cover to the position by using a coin and open the battery cover by turning it clockwise 18 Users Manual Remote Control Buttons Power Standby Button a Control Signal Transmitter Press to turn the computer on or to enter Hibernation AVS Button p54 When the computer is turned off AVStation now is launched When the computer is turned on AVStation premium Viewer is launched Playback Control Button Direction Button Press to move to an item ENTER Button Press to execute the selected item BACK Button Press to return to the l Volume Control Button previous step MUTE Button Press to mute the sound Buttons in
156. with the values found in this memory Run System Setup if you get a message prompting you to run the program You may also want to run System Setup particularly the first time you use your computer to set the time and date use security or power management features or alter the settings of other features BIOS Caution W If you are not familiar with BIOS setup and what the parameters mean seek help from a person who is knowledgeable Incorrect settings may cause your system to malfunction or Crash here or may include additional fields Field names and order of appearance can vary according to the version of the BIOS basic input output system on 7 Your computer s version of System Setup may not include all the fields listed your computer 94 Users Manual Starting System Setup To start System Setup turn on your computer and then press lt F2 gt and hold until the System Setup screen appears Table 2 System Setup Menus Menu Main Advanced Security Boot Exit Function Changes the basic system Configures advanced features on your computer Enables security features including passwords Specifies the order of boot devices and configures boot features Specifies how to exit System Setup To open the menu you need to use use the left or right arrow keys to select the menu name Table 3 System Setup Navigation Keys Navigation Key lt F1 gt lt Esc gt lt gt or lt gt lt
157. y 7 There has to more than 200MB of free space on the hard disk drive If the disk The procedures to create your own restore point are described below 1 Click Start gt All Programs gt Accessories gt System Tools gt System Restore Troubleshooting 143 2 Select Create a restore point and click Next Syrte Rastera Welcome to System Restore Yop oan uet Drian Meiers be ude harn charri bo FOF compuber and recbore s settings and perficrmance i Syateen BARNA PUMA vou comen ter baan amii tive To begir ririt Ehr bak thet you ward bo perlerne Oraled a rebore point rathout causing pou to lose recent work cuch aa cies dumani r or hector are Pereos lets Dirbk my danguba be at tba faved fy changes Pt Sytem Piesbone nahri he yir iiaii ee comobsiehy never sible Tour compuber banis crashes pechore porig poskad epee Chechens beat pou Giri Aled a frain ethane hevorabt yar Geo pois The i edu E pa ane shout bo make a major change bo your spsten such as my Pella A eee Se an or Che poe eel ener Ebagi To calles ati an oolion ard Lon check ext Since changes made after the Recovery Point may not be maintained please back up all necessary files to another location before performing system recovery 3 Inthe Restore point description box type a name to identify the restore point and than click Create A restore point has been created 144 Users Manual Returning your computer to an earlier resto
158. y high 32bit Customizing Your Computer 99 Using External Display Devices Using external display devices such as monitors projectors TVs etc allows you to view screen images alternatively or simultaneously on each device Additionally you can extend the screen onto two display devices to use a larger workspace Using external display devices is especially useful when you are giving a presentation or watching a movie through your TV Switching Display Devices Using the Shortcut Key You can watch the screen through either the LCD or an external display device or you can even watch the screen through both the LCD and an external display device simultaneously 1 Connect the external display device e g a monitor or a projector to the corresponding port of the system To connect a TV connect the TV to the TV output port of the system 2 If you press the lt Fn gt lt F4 gt key combination once the Samsung Display Manager screen appears where you can select a screen Whenever you press the lt F4 gt key while pressing the lt Fn gt key selection moves to the next item Select a mode n U UCD CRT Example Select LCD CRT LCD Notebook Screen 2 CRT External Monitor Screen LCD CRT Notebook External Monitor Screen TV TV Screen connected to the TV OUT port E In the MS DOS environment the picture is displayed to the LCD gt CRT in turns and output to a TV DVI is not supported In full screen M

Download Pdf Manuals

image

Related Search

Related Contents

Philips Sleek DVD micro system MCD388  DSFN 4630 User Manual  MX2100 USB Mini-Console Brochure  取扱説明書 - datavideo  Zotac GeForce 8600 GTS 256Mb DVI GeForce 8600 GTS  MANUEL DE L`OPÉRATEUR    VPL-PX21  User Manuals - Honeywell Analytics  Food Warmer and Holding Station  

Copyright © All rights reserved.
Failed to retrieve file