Home
        Operating Instructions
         Contents
1.             USB SD MMC Player with FM MW Tuner    Operating Instructions       SAFETY INFORMATION    PRECAUTIONS        Use only in a 12 volt DC negative ground  electrical system    Disconnect the vehicle s negative battery  terminal while mounting and connecting  the unit      When replacing the fuse  be sure to use  one with an identical amperage rating   Using a fuse with a higher amperage  rating may cause serious damage to the  unit       DO NOT attempt to disassemble the unit    e Make sure that pins or other foreign  objects do not get inside the unit  they  may cause malfunctions  or create safety  hazards such as electrical shock or laser  beam exposure        Please power off this unit at once and  send it back to the after sales service  center or the dealer  distributor you  purchased from if one of the following  symptoms is found     1  Water or other obstacle enters the unit    2  Smoking    3  Peculiar smell          f you have parked the car for a long  time in hot or cold weather  wait until the  temperature in the car becomes normals  before operating the unit        Keep the volume at a level at which you  can hear outside warning sounds  horns  sirens  etc         Stop the car before performing any  complicated operation     To provide a clear demonstration and an  alternative for easy understanding of the  operation of this unit  graphic illustration  was used  However  this illustration is not  necessary printed as the actual image found  on the unit  
2.    Safety Information                                          1  Panel Controls    nien 2  Remote                                                             3  General                                                          4  Tuner Instructions    5  USB SD MNC Instructions                             5  MP3 WMA Instructions                               6 7  Menu                                                       7 8  Electrical Connections                                  9  Installation                                                    10  Remove the                                                   10  Troubleshooting                                ussssss 11  Specifications                                               12    PANEL CONTROLS       1    Press to turn on the unit      When on  press to mute the volume      When on  press more than 2 seconds to  turn off the unit    2   Press SOURCE button will toggle the  audio source  TUNER   gt  USB   gt  CARD    gt  Aux in   3   In tuner mode  press once or more to  select FM1  gt FM2  gt FM3  gt MW1  gt MW2   Press more than 2 seconds to auto  search and store stations in available  memory      Ih USB CARD mode  press more than 2  seconds to enter        search mode  see            Playback     4   In TUNER mode  Press DISP button once or more  to select display content with the  following sequence   Freq  gt Time  gt PTY     In USB CARD mode   Press DISP button once or more  to select display content with the  f
3.   File name   32 byte dir name   32 byte tag  name   32 byte  5  Tag  ID3 tag ver 2 0     title artist album   32 byte support  6  File name   32 byte dir name   32 byte tag  name   32 byte  7  Multi card reader not support  8  USB 1 1 support  USB 2 0 support  It can  not support USB 2 0 speed  Just  get be  same speed with USB 1 1    Not all USB devices are compatible with  the unit     200 support  file   500    MP3 WMA INSTRUCTIONS    Display Information    During playback  press the DISP button to  display file information in the following order   FOLDER  FILE  ALBUM  TITLE  ARTIST   TIME     Skip Seek    Press  44            button to play previous next  track    Press and hold 144   P   button to seek  fast backward forward  release the button to  playback normally     Searching Folders    1  Press and hold BAND button to enable         searching mode    2  Press the VOL knob to enter FOLDER  searching mode  then rotate the knob to  select a folder     Searching Files    1     2     Press and hold BAND button to enable         searching mode    Rotate the knob to select FILE searching  mode and press the knob to enter   Rotate VOL knob to select one of  characters A Z  _         and 0 9 for the  first character    Press the VOL knob to confirm entry and  the second position will flash    Use VOL button to select the second digit   Repeat above steps to enter the first digit   if necessary    NOTE  The unit will only allow the  selection of digits that correspond with  
4.  WOrKINg oT dogs The batteries are low or empty  Change the batteries   not work properly       SPECIFICATION    Power supply  12V DC 11V 16V  Test voltage 14 4V  negative ground  45Wx4 channels  20Wx4 channels  40 10  T H D      Image response ratio  50dB    HMM  Usable sensitivity S N 20dB      Note  Specifications and the design are subject to change without notice due to improvements in technology           20081128R1    
5.  off  If the blackout is turned on   the screen will turn off 10 or 20 sec after last  access     KEY BLUE RED  Key button color  RED or BLUE for selection     MENU FUNCTION    TIME    Use UP DOWN   gt  PI   144  rotary knob to set  time     EPS mode    ESP 12s  Selected as CD ESP time 12  seconds  MP3 ESP time  gt 100 seconds   ESP 45s  Selected as CD ESP time 45  seconds  MP3 ESP time  gt 100 seconds     LOCAL DX mode    Rotate the knob to choose tuner sensitivity  local or distant     BEEP ON OFF    When on  beep sound response in each input     STEREO MONO mode    Rotate the knob to choose FM stereo or mono     V LAST ADJ mode    Rotate the knob to select volume last or  volume adjust mode    VOL LAST  The turn on volume is the level of  latest power off    VOL ADJ  Press the knob to enter  then rotate  the knob to set turn on volume level     SW ON OFF optional     Rotate the knob to choose Sub woofer on or  off     ROLL ON OFF    Rotate the knob to choose information display  scrolling or not     LOUD ON OFF    When listening to music at low volumes  this  feature will boost the bass and treble ranges  to compensate for the characteristics of  human hearing     TA SEEK ALARM    If the TA  Traffic Announcements  is turned on  and there is no traffic program identification  code received in the specified time  no TA   TP will display        either TA ALARM or TA  SEEK will be activated    TA ALARM   Alarm is turned on    TA SEEK  TA SEEK is automatically activated     MAS
6.  the user manual  Do not use the unit in abnormal condition  for example without sound  or with smoke or foul smell can  cause fire or electric shock  immediately stop using it and call the store where you purchased it     Problem Possible cause ETT    Car ignition is not on  Turn your car key in the ignition   The unit will not switch on  Cable is not properly connected  Check cable connection   Fuse is burnt  Replace fuse with a new fuse of the same capacity     No sound Volume is set at minimum or the mute Check the volume or switch the mute function off   function is on     The unit or screen does not work normally    The unit system is unstable  Press the RESET button     TUNER mode    Unable to receive stations  The antenna is not connected properly  Connect the antenna properly        z      The antenna is not fully extended or it is  Fully extend the antenna        if broken  replace it with     Poor quality reception of radio station  b  roken  new one          Connect the permanent live      the unit to the permanent  Preset stations are lost  The battery cable is not properly connected  live   on the vehicle     USB SD MMC mode    Unable to insert USB device or SD MMC  The memory card or USB device has been         Check that the file system is in FAT or FAT32 format  Due  Tehea evicesoT  SD MMC cardi cannot NTFS format is not supported  to different formats  some models of storage devices or  i MP3 players may not be read     Remote control    TNG TOMOS conn oS OL
7. K DPI ALL    In some cases  the AF function may be  influenced by some interference  examples  are signals with strong field but without the  RDS data  For this reason  the unit has two    options to avoid the above interference   MASK DPI mode   Only AF which has different  program identification is masked    MASK ALL mode   The AF which has different  program identification and NO RDS signal with  high field strength is masked     RETUNE L S    RETUNE S or RETUNE L is time length  selection of TA SEEK retune interval   RETUNE S  short  TA SEEK retune interval is  45 seconds    RETUNE L  long  TA SEEK retune interval is  180 seconds    Remark  RETUNE mode functions for TA  during TA SEEK mode only     ELECTRICAL CONNECTIONS    Wiring Diagram                                  E       ls  5 d                                         Antenna                                                                                                                                                              2 tate le  Fuse 15A    fe           hsi               pus per   Black Red Ignition ke  Ground Lead 0     I    12   DC When              To car battery     Yellow          Blue White otor Electric Antenna relay control Lead  Continuous  12V DC C ILLU Amplifier relay control Lead     IDE  I iL   2 Y  Green  White  Gray  Purple   Black   Green Black    White Gray   Black Purple    Black  Stripe Stripe Stripe Stripe                       e     Y  Left Speaker Left Speaker Right Speaker Right 
8. Speaker   Rear   Front   Front   Rear                                         Gv f tp           5   acc 1231    REAR LEFT                         o   mamie   2                      FRONTLEFTO   29           12   FRONTLEFTQ    30   o 8       3   FRoNTRGHTO   3             14  FmoNTRGHTI    32              15   REARRIGHTO   33          s   REAnmer      7   oe          17          18   LINE OUT R REAR a             INSTALLATION GUIDE REMOVE THE UNIT    Installation Procedures Switch off the power before remove   First complete the electrical connections  and then check for correctness  1  Remove the trim plate        Installation Opening    This unit can be installed in any dashboard having an opening as shown below   The dashboard should be 4 75mm   5 56mm thick in order to be able to support the unit                    K 2  Insert both U keys into holes on the front of the   amp  unit until they lock   Y   k 183mm  gt    Installation  1  Inset mounting collar into the dashboard   and bend the mounting tabs out with a  screwdriver  3   Make sure that lock lever is flush with the  mounting collar  not projecting outward    2  Secure the rear of the unit   Slide the unit into the dashboard   3  Insert trim plate     4  Take out all of the connector between the unit    and vehicle        TROUBLESHOOTING    The following checklist can help you solve some problems which you may encounter when using the unit  Before consulting it  check the connections  and follow the instructions in
9. disc    e For ISO 9660 compliant format   the maximum allowable depth of  nested folders is 8  including the root  directory folder     e When CD R disc is used  playback is  possible only for discs which have been  finalized    e          sure that when        CD R is burned  that it is formatted as a data disc and NOT  as an audio disc    e You should not write non MP3 files or    unneeded folders along with MP3 files on  the CD R otherwise it takes a long time  until the unit starts to play MP3 files    With some CD R media  data may not  be properly written depending on their  manufacturing quality  In this case  data  may not be   reproduced correctly  High quality CD R  disc is recommended    Up to 16 characters are displayed for the  name of an Album or a Track  ID3 TAG  version 1 x is required    Note that the unit may not play tracks in  the order that you wrote them to the disc     MENU FUNCTION    Press and hold DISP button more than 2  seconds to enter menu mode  then press the  VOL knob repeatedly to changes the mode as  follows    DEMO ON OFF   gt  BKO ON OFF  gt  KEY  BLUE RED   gt  TIME   gt  ESP 12 45   gt  LOCAL   DX   gt  BEEP ON OFF   gt  STEREO MONO   gt   V LAST ADJ   gt  SW ON OFF   gt  ROLL ON   OFF   gt  LOUD ON OFF   gt  TA SEEK ALARM    gt  MASK DPI ALL   gt  TA VOL   gt  RETUNE L S    DEMO ON OFF    Demo on  Start demo mode automatically  when device is not in use for 2 min     BKO 10s 20s OFF    Rotate the knob to choose Blackout time  10s  20s or
10. ith it    The remote control can operate within a  distance of 3 5m     EY  Remote Sensor  30    30                                 E            Power on off    Mute    Volume    Press to change EQ preset     Press more than 2 seconds to enter audio  setting mode    In Menu mode  short press SEL key to  select menu list function    Traffic announcement identification    Alternative frequency    REG on off  long press   7    Disc Playback  Button 1    Play Pause    Top play  press more than 2 sec   Button 2    Intro play  10 sec   Button 3    Track repeat play  Button 4    Track random play  Button 5    Folder down  Button 6    Folder up    Radio Preset  Press to listen to a preset station   Press and hold to store station   8   Radio USB  when USB is connected  Card   when SD MMC card inserted  Aux in  9    Radio tune    Track seek  10    AMS  Radio preset scan Radio auto preset    SEARCH  MP3 search mode  11    Band switch  FM1  FM2  FM3  MW1  MW2  12    Program type  13    Display switch    Menu mode  long press      gt             oa    Replacing the lithium battery of  remote control unit     When the range of the operation of the card  remote control becomes short or no functions  while operating  Replace the battery with a  new lithium battery  Make sure the battery  Polarity replacement is correct   1  Pull out the battery holder while pressing  the stopper   2  Insert the button type battery with the  stamped    mark facing upward   Insert the battery holder into the 
11. ivated     On the remote control  Press MUTE button  to mute the volume     Audio Controls    On the panel  To adjust the bass  treble   balance and fader  press the VOL control  more than 2 seconds  then press repeatedly  until the appropriate audio control appears on  the display panel  Within five seconds  rotate  the VOL control to adjust the audio settings for  the selected function     On the remote control  Press SEL button  more than 2 seconds to enter audio setting  mode  then press SEL repeatedly until the  appropriate audio control appears on the  display panel  Within five seconds  use VOL  buttons to adjust the audio settings for the  selected function     Auxiliary Input   To access an auxiliary device    1  Connect the portable audio player to the  AUX interface on the front panel    2  Press the SRC button to select Aux In  mode    Press SRC again to cancel Aux In mode and   go to the next mode                                                                                                                                      1 2 3 4 5 6 7  8  9   40 org        EE   Lad      VOL eue    SRC BAND   DISP PTY AF TA 48      212 15 I           i 42 13 04    TUNER INSTRUCTIONS    AM FM Band Selector  BAND     During radio play  press the BAND button to  choose between three FM and two MW bands   The indication    MW    or    FM    appears on the  display panel according to your selection     Up Down Tuning    Press the seek 144   PPI to tune to the  previous next avai
12. lable station  Press and hold  the seek 144   PPI button to activate manual  tuning  You can then use the tune track  buttons to tune stations downward upward  step by step  The current frequency will be  shown in digital format on the display panel     Auto Store    On the panel  Press and hold BAND button  to automatically select six strong stations  and store them in the current band  The new  stations replace stations already stored in that  band  Press 1 6 button to listen to a preset  station     On the remote control  Press AMS button  to search and sore 6 strong stations in the  memory     1     Loading SD MMC card   Insert the SD MMC card into the slot  with  the front side at top    The unit will play the music automatically  and the LCD will show CARD    Take out SD MMC card   Push SRC button and switch to non  CARD mode  slight press SD MMC card   take out the card when it was pop out   Loading USB equipment   Open the rubber cap  insert the USB into  the connector and the unit play the music  in the USB storer automatically  and the  LCD will show USB    Take out USB equipment   Push the SRC button and switch to non  USB mode  then take off the USB storer   close the cap        USB SD MMC INSTRUCTIONS    USB SD MMC Notes    USB functions  flash memory type          music play  1  SD MMC card support  2  USB flash memory 2 in 1  SD MMC    support  3  Fat 12 fat 16 fat 32 is possible    fat 12 16  dir   200 support  file   500  support    fat 32  dir    support   4
13. ollowing sequence   Folder   gt  File   gt  Album   gt  TITLE   gt   Artist   gt  Time     Press more than 2 seconds to enter   system MENU  see    SYSTEM MENU      5    Program type  6    Alternative frequency    REG on off  long press                                                                                                                           52   m   SRC BAND DISP PTY AF TA p 15                  5    lot   ai            7    Traffic announcement identification  8    Remote sensor  9   Radio tune     To fast search within a track skip to next   or previous track   10    Reset hole   11    Rotate the knob to adjust the volume  level      Push to change EQ preset  OPTIMAL   FLAT  POP  USER  TECHNO  ROCK   CLASSIC  JAZZ      Push more than 2 seconds to enter  audio setup menu  then press briefly  once or more to select BASS TREBLE   BALANCE FADER  rotate the knob to  adjust level     12    Button 1  Play pause  Press more than 2 seconds if  you want to start playback from  the beginning of the first track  of your USB or SD MMC card      Button 2  Intro play  10 sec       Button 3  Track repeat play     Button 4  Track random play     Button 5  Folder down     Button 6  Folder up   1 6 Radio preset   Press to tune in a preset station  Hold for   more than 2 seconds to store station    13    Aux in jack   14    USB connector   15    SD MMC card slot         REMOTE CONTROLS       Operating range   Point the remote control unit to the remote  sensor when you operate w
14. remote    control   WARNING     e Store the battery in place where children  cannot reach  If a child accidentally  swallows the battery  consult a doctor  immediately    e Do not recharge  short  disassemble or  heat the battery or dispose it in a fire   Doing this may cause the battery to give  off heat  crack or start a fire    e Do not leave the battery with other  metallic materials or poke the battery with  tweezers or similar tools    e When throwing away or saving the battery   wrap it in tape and insulate     GENERAL OPERATION       Power On Off Button    On the panel  Press the         button to turn  the unit on when the vehicle ignition switch is  on  Press and hold the button to turn the unit  off     On the remote control  Press the  b button  to turn on off the unit     Mode Button  SRC     Press the SRC button to change between  Radio  USB  when USB is connected    Card when SD MMC card is in  or AUX play     Adjust Volume level    On the panel  Rotate the VOL control to  adjust volume level  Rotate it clockwise to  increase and anticlockwise to decrease the  volume     On the remote control  Press A   W button  to adjust volume level     Audio Mute    On the panel  When on  press the  1     ff  button to mute the volume from the system        MUTE    will appear on the display panel and  the volume will be muted  Press the MUTE  button again  or rotate or press the VOL  control to return the volume level to the setting  in use before the Mute function was act
15. the number of files on the media you are  searching    Once the entry finished  press and hold  the VOL knob to search the selected file     MP3 Overview    e        is short for MPEG Audio Layer    and  refers to an audio compression technology  standard    e The unit can read MP3 files written in the  format compliant with ISO 9660  However  it does not support the        data written by  the method of packet write    e The unit can not read an        file that has a  file extension other than   mp3     e If you play a non MP3 file that has the    mp3  extension  you may hear some  noise    e  n this manual  we refer to what are called   MPS file  and  folder  in PC terminology as   Track  and  Album   respectively    e Maximum number of directory level is 8   including the root directory  Maximum  number of files and folders per disc is 256    e The unit may not play tracks in the order of  track numbers    e The unit plays only the audio tracks if a disc  contains both audio tracks and MP3 files     MP3 WMA INSTRUCTIONS    e When playing a disc of 8kbps or            the  elapsed playing time in the display window  will not be correct and also the intro play  may not function properly       VBR  Variable Bit Rate     Note on creating your own CD Rs  or CD RWs containing        files    e To enjoy high quality sound  we  recommend converting to MP3 files with  a sampling frequency of 44 1 kHz and a  fixed bit rate of 128 kbps    e DO NOT store more than 256 MP3 files  per 
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
取扱説明書 - 日本フォームサービス  cliquez  esterilsol™ veterinary instruction manual  LED Matrix Blinder 5x5 DMX blinder user manual  Denon DN-V1700 CD Player User Manual  HI 96734 Fotometro per l`analisi di cloro libero e  Instruction Manual (Européen) - Service après vente  Série ZK2  Bougie plate solaire à flamme LED vacillante, blanc    Copyright © All rights reserved. 
   Failed to retrieve file