Home

Microsoft Word Viewer - Troubleshooting

1. TASSIMO TROUBLESHOOTING In the table below are solutions to problems that may occur PROBLEM SITUATION SOLUTION E SS All the 1 Machine not prepared for 1 Follow the procedure Preparing Your Machine indicator use for Use ae are 2 Water level is too low 2 Refill the water container oe 3 Water container not fitted 3 Place aT DISC label side down on the T DISC correctly holder and close the brew mechanism 4 NoT DISC in machine 4 Clean the bar code reading window or 5 T DISC not read or damaged replace the T DISC 6 Piercing unit blocked 5 Remove and clean the piercing unit 7 The machine may require 6 Descale the machine following the Descaling descaling procedure 8 Internal machine fault 7 Contact Tassimo Customer Service 1 877 TDISCS1 1 877 834 7271 The machine The brew mechanism may notbe Make sure that a T DISC is placed on the T DISC will not move closed properly holder and the brew mechanism is firmly closed past STANDBY iS Saeed The Auto Bar code reader may not be able to Clean the bar code reading window Replace the T Mode is not read the T DISC label DISC You can still enjoy your preferred drink by working using the Manual Mode Sen na A My cup is Each drink has been formulated to Ensure that you use the following recommended cup overflowing produce the perfect amount of sizes liquid Be sure that you are using Espresso 3 oz 90 ml cup the right sized cup for your d
2. alias oe i Dea vs oa My drinks are The machine may require Descale the machine following the Descaling brewing descaling procedure smaller than usual I have lostmy A cleaning disc is needed to rinse Contact Tassimo Customer Service cleaning disc and descale the machine 1 877 TDISCS1 1 877 834 7271 My machine is The electrical supply may not be Check that the machine is properly plugged into the not operating connected properly electrical supply Check the on off switch at the back there are no of the machine lights illuminated
3. rink Filter Coffee Caf Crema 11 oz 325 ml cup Cappuccino Latte Tea and Chocolate My cup doesn t The cup stand is too close tothe Try lowering the cup stand to fit your cup You can fit brew mechanism also temporarily remove the cup stand and drip tray leaving the backsplash in place Liquid is Cup is placed too far away from the Adjust the height of the cup stand up to ensure that splashing out brew mechanism the cup is closer to the brew mechanism of the cup The machine is 1 T DISC is damaged or Press the start stop button to stop the brew cycle leaking from leaking Slowly open the brew mechanism remove the T the brew 2 The piercing unit is not fitted DISC and clean the inside of the brew mechanism mechanism properly Remove and refit the piercing unit The machine is 1 Drip tray is full of water TURN OFF AND UNPLUG MACHINE leaking from 2 Backsplash is not properly the bottom fitted 3 Water expansion outlet is 1 Empty the removable drip tray not properly descaled 2 Remove and refit the backsplash cup stand 4 Water container is not and drip tray back on the machine properly fitted 3 Clean the water expansion outlet using a 5 Piercing unit is missing or clean cloth moistened with white vinegar damaged check the rubber 4 Refit the water container seal around it 5 Refit piercing unit if available or call customer service for replacement piercing unit and replace Hair D0

Microsoft Word Viewer - Troubleshooting

Contents

Download Pdf Manuals

Related Search

Related Contents