Home

User's Manual AVIC-S1

Contents

1. Day Mode Shows the map in the Day view and switches the device s screen to day mode Night Mode Shows the map in Night view and switches the device s screen to night mode 85 User s manual AVIC S1 7 5 Route Preferences Route Preferences In the ROUTE PREFERENCES window you can specify your driving profile and establish the type of route that should be calculated as standard The setting carried out here effects the calculation of the probably driving time 1 Touch the Route Preferences button The ROUTE PREFERENCES window opens Route Preferences Back Speed Route Type Interstates profile Ferries Tollways Recalculate Speed Profile The current setting is displayed on the button 1 Touch the button in order to open the SPEED PROFILE 2 Touch the profile that corresponds to your driving profile The ROUTE PREFERENCES window is displayed again Route Type The current setting is displayed on the button 3 Touch the Route Type button in order to toggle between the various modes Option Meaning Fast route This option calculates the shortest route in terms of time Short route This option calculates the shortest route in terms of distance Interstates Ferries The current setting is displayed on the respective button Tonways 4 Touch the buttons Interstates Ferries and Tollways in succession and establish whether these should be integrated or avoided in the route calculation 86 Rout
2. Orientation 7 3 Map Type Map Type 2D 3D 7 4 Day Nig Day Night Display Configuring AVIC S1 Use this setting to establish whether the map should be orientated so that north is always at the top set to north or in such a way that the driving direction is always at the top driving direction The current setting is displayed on the button Touch the button to change the setting Setting Meaning Heading up The orientation in driving direction is recommended for navigation because the directions are shown on the map to the right and left just as they are in reality North up The north alignment corresponds to the map orientation on a printed map but this is impractical for navigation purposes Use these settings to establish whether the map should be displayed as standard in 3D or 2D This setting only affects the map when it is in Standard map view With the views Search for destination and View destination the map is always shown in 2D refer to chapter Map views page 69 The current setting is displayed on the button Touch the button in order to change the setting Setting Meaning 3D Three dimensional map view 2D Two dimensional map view ht Display With this setting you can establish whether the map should be displayed in day or night view This setting also effects the brightness of the screen The current setting is shown on the button Touch the button to change the setting Setting Meaning
3. Use this function if you want to skip the next waypoint Example You have planned an itinerary from your office to Company A and then to Company B and you are already on your way Before you arrive at Company A a mobile phone call informs you that you need not visit Company A Condition The map is displayed in STANDARD map view 1 Press the MENU key The DESTI NATION window opens 2 In the DESTI NATION window touch the To the right button Touch once again the To the right button 4 Touch the Skip Next Waypoint button to navigate to the waypoint after the next here Company B The system recalculates the route Company B will be your next destination Waypoints User s manual AVIC S1 Blocking a route section Blocking a route section manually This is how you block route sections You may block a route section manually in order to evade it Manual blocking forces a recalculation of the route Presume that you are driving on a freeway and a radio message announces a traffic jam 4 miles ahead of your current position With the Block route sections function you may instruct the navigation system to evade the announced traffic jam A manual blocking is only valid for the current navigation process The respective route section will be unblocked for the next navigation or when you restart the software This function is only available during navigation Condition The map is displayed in STANDARD ma
4. Insert the AVIC S1 DVD in your DVD ROM drive The Installer Tool starts automatically Select your language Click on Upgrade Restore Map Click on SD card Follow the on screen instructions After copying the map to the memory card insert the memory card in your navigation device Note You don t need to copy the map from the memory card to the device you can also download the map directly from your memory card To do this tap on No when after inserting the memory card in your navigation device you are asked if you would like to copy the map to the device 103 User s manual AVIC S1 9 Glossary GMT GPS HDOP POI Point of Interest Glossary GMT Greenwich Mean Time is the mean solar time at the Royal Greenwich Observatory in Greenwich near London England which by convention is at 0 degrees geographic longitude Theoretically noon Greenwich Mean Time is the moment when the Sun crosses the Greenwich meridian and reaches its highest point in the sky in Greenwich Up to 1972 GMT was the global time standard Because of the Earth s uneven speed in its elliptic orbit GMT has been replaced by UTC Universal Time Coordinated which is an ultra stable time standard based on atomic clocks The GPS Global Positioning System is based on 24 satellites that are in orbit round the earth They are permanently emitting the time and their current position The GPS receiver receives this information and calcu
5. 90 C rrent TIME TE 89 Destination Info 91 Displayed Tume 91 GPS current position 92 Street names ON map 92 Waypoint Info 91 Displayed me 91 DISTANCE EE 100 Distance Rn EE 16 GPS current position 65 92 E Sg EE 97 ebe e 95 Battery StatuS cece eee 97 Brightness co Aexisassacvipenntaseuereus 96 CICK SOUNO BEEN 96 Demo Mode 95 GPS SlAUUS E 97 Home Address 94 NEPOOQUCTION EE 16 Bitte 99 Map YD nrrainn N eens 85 Index Sigg ge EE 85 OVGERAY POL wnercmiietiees tne teercmaest 87 Phone Men 94 Product Information 100 Guided FoU EE 100 Regional Settings sesesrererrersrn 98 Distante ee S 100 Kieler Let 99 Time Zone 99 100 Restore Factory SettingS 100 Route Preferences sceeeeeeeees 86 Route TYPeC ccc ecee ees eeeeeee ees 86 Speed Protle ees 86 SKINS EE 93 Street names ON map 92 SUMMED TED 15 Time FOFIMAE ice dek De ey cheaters 15 100 HME Z ONC ran EET deta 99 Waypoint Info EE 91 SIMuUla tO DEE 62 82 STOD a r A ee 62 SKIN nen ETE E N 93 Software Keyboard 21 Speed DOE gg NENNEN Eh NEEN 86 Street names ON map 92 SUMIMEr TINE Si mipiveinven atii Ereet 15 SWIECHING ON DEE 13 SYM Ol erte 7 Symbols in the Manual 6 T NK e EE 7 Index User s manual AVIC S1 TERMINGIOOY een a 7 Leg 7 BUON EE 7 Dialog WINCOW cccceeeeee seen erences 7 DISPla y iinne ae 7 Hard EE 7 Sils li elle 7 LDU Field EE 7
6. 28 4 3 1 Opening the DESTINATION WiINdOW sssssssssererersrsrn 28 4 3 2 Specifying destination state pDrovIncel 29 4 3 3 Entering a destination address 30 4 3 4 Specifying points of interest cc cece cece eee ee ees 37 43 5 Destination NISEOLY vai uee Re R Ed EE 44 4350 AGGFESS ele e 45 4 3 7 Navigating home 46 4 3 8 Selecting destinations on Uhemanp eee ees 47 4 4 Administering GEStinations c ccc ceceee cece eeeeeeeeeeaeeeeeeees 49 4 4 1 Opening the ADDRESS BOOK cccceeeeeeeeeeeeeeeeeees 49 E e E Age DEE 50 AAS EUN RE 51 AAA DEEN DEE 54 4 5 Itinerary with wavpoimte cece cece cece cece eeeeeeeneeeeeeeeaeas 55 4 5 1 Opening the ITINERARY WIpnOdOw 55 4 5 2 Indicating waypoints cece cc ece cece cess eeeeeeeeeeeees 56 4 5 3 Scrolling through the list of wavpointe 57 4 5 4 Editing the list of wavponte cece ccee cece eens 57 Table of contents User s manual AVIC S1 4 5 5 Managing Itineraries eosina a a i 58 4 5 6 Calculating bheroute cc cccccc eee e cece eeeeeeeeeeeeaes 60 4 5 7 Displaying information regarding the route 61 4 5 6 SIMUIatInG A TOE EE 62 4 5 9 Starting navigation 62 5 Working with the MapP ssssss22222222222222 222222 2 2 8 65 5 1 Status CISDIAY S rreri aE E ennai nena 66 5 2 Z OOE OE T E E E A 68 5 3 Eat ETH 69 PaL Standard Map TEE 69 5 3 2 Search for destination VIEW cc cece ceeeee eee e
7. 7350 CHARLOTTE 26202 60 63 6 35 2225 Use the Up and Down buttons or the scrolling wheel to scroll through the list Touch the destination to which you would like to drive The route is calculated When route calculation is completed route guidance will begin Entering a destination User s manual AVIC S1 4 3 6 Address book Overview 8 Changing the Sorting Order Ma Navigation Destinations which you drive to repeatedly can be stored in the ADDRESS BOOK You can quickly select them without entering the address again For details on how to save and edit a destination refer to chapter Administering destinations page 49 1 Open the DESTINATION window Refer to page 28 2 In the DESTINATION window touch the Address Book button The ADDRESS BOOK opens 3 Use the Up and Down buttons or the scrolling wheel to scroll through the list 4 Touch the destination to which you wish to drive The route is calculated When route calculation is completed route guidance will begin You can sort the entries in the address book alphabetically or by the categories assigned to them Sorting the address book alphabetically Sorting the address book according to category The button for the current sorting order is inactive 45 User s manual AVIC S1 4 3 7 Navigating home Overview You can save one address as a home address on the AVIC S1 Navigation to the home address can be
8. ITINERARY window Opening the To plan and edit a route you always start in the ITINERARY ITINERARY window window You can open the ITINERARY window as follows 1 Open the DESTINATION window refer to page 28 2 In the DESTINATION window touch the To the right button 3 Touch once again the To the right button 4 Then touch the Itinerary button The ITINERARY window now opens i i Done Load Add Save Enter the starting point point of destination and as many waypoints as you wish refer to chapter Indicating waypoints page 56 Calculate the route and view the route on the map refer to chapter Calculating the route page 60 Load Download a previously saved route refer to chapter Load i route page 59 Save a planned route in order to download it again at any point in the future refer to chapter Save route page 59 Save Navigation 55 User s manual AVIC S1 4 5 2 Indicating waypoints This is how you plan your route 56 1 Open the ITINERARY window refer to page 55 2 Touch the Add button in order to specify the first waypoint The ITINERARY window opens Enter the first waypoint refer to chapter Entering a destination page 28 The ITINERARY window opens again The specified destination is listed as waypoint 1 6301 Baberton Charlotte 28269 Done Add 4 Repeat the steps 2 and 3 for any extra waypoints that should be added to the route 3
9. Navigation Open the DESTINATION window Refer to page 28 In the DESTINATION window touch the To the right button Touch the Crossing button The keyboard appears with the City entry field Note If the Region button in the right lower corner of the display does not show the state province in which your destination is located then touch to specify the state province refer to Specifying destination state province page 29 Enter the destination city Note The last 8 cities from the displayed state province that you have entered as destination city are listed chronologically If you want to enter one of these cities touch entry to select As soon as the destination city appears in the list above the keyboard touch to select The keyboard appears with the Street entry field 35 User s manual AVIC S1 a 36 6 Enter the destination street Note The last 8 streets from the destination city that you have entered as destination street are listed chronologically If you want to enter one of these cities touch entry to select As soon as the destination street appears in the list above the keyboard touch to select The keyboard appears with the Street entry field for the intersecting street Casino Or Charlotte Isaac Dr Charlotte 8 Enter the intersecting street As soon as the street appears in the list above the keyboard touch to select The route is ca
10. as text beneath it The battery symbol is the same one that is shown in the map when its display is set refer to Battery Status page 92 Touch the Back button to close the BATTERY STATUS window 7 12 5 GPS Status GPS Status The GPS STATUS window includes information regarding your current location and your present speed 1 Touch the GPS Status button The GPS STATUS window opens Configuring AVIC S1 97 User s manual AVIC S1 Information Meaning GMT Greenwich Mean Time London time without summertime Lon Lat Current position Specifies the East longitudinal and north latitudinal degrees Satellites Number of receiving satellites For navigation the signals require at least three satellites HDOP Horizontal Dilution of Precision Indicates the quality of the positioning Theoretically values from O to 50 are possible whereby it follows the smaller the value the more precise the positioning value O no deviation from the actual position Values up to 8 are acceptable for navigation purposes Speed Shows the current speed of the vehicle Location Shows the current location Tap on the Back button to close the GPS STATUS window 7 13 Regional Settings Regional Settings 98 In the REGIONAL SETTINGS settings window you can change the basic settings e g language and time zone that you specified when you first started the navigation system refer to Basic settings page 13 1
11. can get an overview of the route In doing so the first specified waypoint is assumed as the Starting point of the route Note During navigation the current position is the starting point The first stage is then the drive to the first specified waypoint 1 Touch the Done button in order to calculate the entire route as well as the foreseeable duration of journey Note For the route calculation to the entered destination the settings will be taken into consideration that have been entered in the settings window of the ROUTE PREFERENCES window To do this refer to chapter Route Preferences page 86 The route is calculated A window informs you of the progress of the calculation from 6301 Baberton Charlotte 28769 toa 3412 Pochard Charlotte 28269 Section 1 Total As soon as the route is calculated the map opens and the route is displayed on the map Back GC B The route is highlighted in green The specified waypoints are labelled with little flags Itinerary with waypoints Navigate Det Sim Back User s manual AVIC S1 You have the following options Launch the navigation to the first waypoint refer to chapter Starting navigation page 62 Open the ROUTE DETAILS window in order to see detailed information regarding the route refer to chapter Displaying information regarding the route page 61 Simulate a route guidance refer to chapter Simulating a route p
12. ciuhasguciesicasaae dats a A 99 FE TIME et EE 100 TLA DENCE ee eaea ar Te AA 100 7 14 ProductinormatlON EE 100 7 15 Restore Factory Gettnmge cece eee eee eeeeeeeeeeeeenaaes 100 KEES 101 8 1 Appendix A Restoring the Software and Map 102 8 1 1 Restoring the software 102 8 1 2 Restoring the map 103 9 GIOSSOLY EE 105 10 NGO EE 107 User s manual Table of contents iii 1 Introduction Topics covered in this chapter 1 1 About this manual Arrangement Conventions Symbols in the Manual Terminology 1 2 Legal notice Liability Trademarks 1 3 Support 1 4 The basic principle of navigation Introduction User s manual AVIC S1 page 6 page 8 page 9 page 10 User s manual AVIC S1 1 1 About this manual 1 1 1 Arrangement Find information If you are looking for specific information or the explanation for a quickly specific term you can refer to the following sections in the manual Inthe list Terminology on page 7 you ll find an explanation of terms used in this manual In the Glossary on page 105 you ll find an explanation of the specialist terms and abbreviations Inthe Index on page 107 you ll find page references 1 1 2 Conventions Conventions For better legibility and clarification the following styles are used in this manual Style bold bold italic SMALL CAPITALS 1 1 3 Symbols in the Manual Use Buttons icons names of entry fields and elements of the soft
13. click on the Setup exe file 1 Insert a memory card with at least 70 MB free memory in your card reader 2 Insert the supplied DVD in your DVD ROM drive The Installer Tool starts automatically Select your language Click on Upgrade Restore Application Click on SD card Follow the on screen instructions SS ee Once the installation files have been copied to the memory card you will be basked to insert the memory card in the navigation device 7 Insert the memory card in your device 8 Switch on your navigation device 9 The software installation starts automatically Note If the Installer Tool does not start automatically open Windows Explorer Select the directory for your DVD drive and Appendix A Restoring the Software and Map User s manual AVIC S1 double click on the Setup exe file 8 1 2 Restoring the map Via ActiveSync Via card reader Appendix a N 3 4 5 6 Connect your navigation device to your PC via ActiveSync Insert the AVI C S1 DVD in your DVD ROM drive The Installer Tool starts automatically Select your language Click on Upgrade Restore Map Click on MS ActiveSync Follow the on screen instructions Note If the Installer Tool does not start automatically open Windows Explorer Select the directory for your DVD drive and ee ee double click on the Setup exe file Insert a memory card with sufficient free memory into your card reader
14. second so your current location moves along the map right away as you move also The basic principle of navigation User s manual AVIC S1 2 Using the AVIC S1 for the First Time Topics covered in this chapter 2 1 Power supply and charging the battery page 12 At home page 12 In the car page 12 End of recharging page 12 2 2 Switching on the AVIC S1 page 13 2 3 Basic settings page 13 Using the AVIC S1 for the First Time 11 User s manual AVIC S1 2 1 Power supply and charging the battery The unit is shipped with the battery uncharged You must connect the device to an external power source through the supplied 12V or AC adapter and recharge the battery Once the device is connected to an external power source it can be used even if the battery is not recharged 2 1 1 Athome 1 Connect the mini USB end of the AC adapter to the mini USB opening on the bottom of the navigation device 2 Insert the adapter into an outlet The diode indicating the charging status of the battery is to the left of the screen and lights up orange while recharging 2 1 2 Inthecar Install the suction mount 2 Place the AVIC S1 in the cradle The diode indicating the charging status of the battery is to the left of the screen and lights up orange while recharging 2 1 3 End of recharging As soon as the diode lights up green the battery is completely recharged Caution Recharge the unit fully when using it for the firs
15. the navigation device The LANGUAGE window opens Please indicate your language Indique su idioma por favor Veuillez indiguer votre langue English Francais Espanol More Mas Plus 2 Touch the language in which you would like to operate the unit 3 If your language is not displayed touch the More Mas Plus button to view more languages As soon as you select a language a window opens This window informs you that you must restart the unit In order to apply the language change the device will be restarted 4 Touch OK The system switches off and then back on again Operation continues in the chosen language 14 Basic settings Time Zone Summer Time Time Format User s manual AVIC S1 The TIME ZONE window opens Please indicate your time zone L t Ried EIER zenta Hirter US Uer canadaj d di L EGlE e EIER Saskatchewan GM T 0600 guadalajara Mexico City Monterrey GMT 06 00 Central America Touch the time zone that applies to your location You can scroll through the list with the Up and Down buttons The cities displayed in the respective time zone are an aid for choosing the correct time zone The SUMMER TIME window opens Please specify whether the changeover to summertime or wintertime should take place automatically Yes No 5 Specify whether the changeover to summertime or wintertime should take place automatically The TIME FORMAT window o
16. 3 Touch the icon of the group to which you wish to assign the entry If you do not wish to assign the entry to a group then touch the No Icon button 4 Touch the OK button The ADDRESS BOOK RECORD window opens again Close the ADDRESS BOOK RECORD window and return to the ADDRESS BOOK The new entry appears in the list _53 User s manual AVIC S1 Changing an address Overview You can change the addresses that are assigned to an address book e g if one of your friends moves 1 Open the EDITING window for the entry the assigned address of which you wish to change refer to page 51 2 Touch the Location button 3 Enter the new destination refer to chapter Entering a destination page 28 The ADDRESS BOOK RECORD window opens again Back Close the EDITING window and return to the ADDRESS BOOK The new entry appears in the list 4 4 4 Deleting 1 Open the ADDRESS BOOK RECORD window for the entry you wish to delete refer to page 51 2 Touch the Delete Record button Delete Record The CONFIRMATION window appears Are you sure you want to delete GEORGE from your address book 3 Tap on Yes in order to delete the destination The entry is deleted from the address book 54 Administering destinations User s manual AVIC S1 4 5 Itinerary with waypoints Itinerary planning You may plan itineraries without receiving GPS signals Planned itineraries can be stored 4 5 1 Opening the
17. 66 Charles Matthews 26105 Itinerary with waypoints User s manual AVIC S1 4 5 3 Scrolling through the list of waypoints Up Down You can view a maximum of 3 waypoints on the display If the list includes more waypoints to the left alongside the list the two buttons Up and Down will be activated and you can use these to scroll Touch this button to view the 3 previous waypoints Touch this button to view the three following waypoints The end of the list may display just one or two waypoints 4 5 4 Editing the list of waypoints Overview You can add additional waypoints to the list of waypoints at any time you can change the order of waypoints delete waypoints or view the specified waypoints on the map Opening the EDIT LIST OF WAYPOINTS menu Navigation 1 In the list of waypoints touch the waypoint that you wish to edit The menu EDIT List OF WAYPOINTS opens to the right finery Sd A 6301 Baberton A Charlotte 28269 3412 Pochard Charlotte 286269 366 Charles Matthews 26105 This menu offers the following buttons 57 User s manual AVIC S1 Change the order Move waypoint to Touch this button to navigate to the selected waypoint earlier top example waypoint 3 becomes waypoint 2 Move waypoint to Touch this button to navigate to the respective waypoint later bottom example waypoint 2 becomes waypoint 3 Deleting waypoints Delete waypoint Touch this button to delete the
18. EST NATIONWIDE window opens The category that you have chosen is specified at the top The keyboard appears with the entry field for the chosen category Enter the name of the point of interest either in whole or in part All the destinations of the specified category the names of which begin with the characters entered or include the characters entered are listed above the keyboard 7 Use the Up and Down buttons or the scrolling wheel to scroll through the list of points of interest Touch the point of interest you would like to drive to The route is calculated When route calculation is completed route guidance will begin If no point of interest with the specified category and the name entered is found then a dialog window appears with the following message The area doesn t contain any Points of Interest of the selected category 1 Touch OK in order to return to the CATEGORY window 43 User s manual AVIC S1 4 3 5 Destination history Overview 44 AVIC S1 saves destinations that you have navigated to before in the list DESTINATION HISTORY You can quickly select these destinations without having to repeat the information that has already been entered once before de 2 Open the DESTINATION window Refer to page 28 In the DESTINATION window touch the Destination History button The DESTINATION HISTORY window opens Destination History Back HICKORY 26602 61 3356 35
19. Entire Route 70 Standard EE 69 WISI BEE 69 View destination ON map 72 ZOOM MI serena cease es nee aan 68 ZOOM level bar 68 ZOO OUL EEN 68 N Navigation Change route preferences 81 No GPS Reception 64 Navigation aide 73 Navigation System SWITCHING OM eege 13 Next destimation sssscsseereererrrerrns 78 O Orientation a N 85 overlay E EE 87 D PRONS MENG EEN 94 POM Abee N 37 Points Of mterest ccc cece eee e eee eens 37 La CIEY EE 40 Nationwide 2 cece ce cece cece eeeeeeneeeanes 42 NGARDY EE 37 Kelte leie KEE 12 Product Information 100 R Regional Settings ccceeeeeeeeeees 98 Restore Factory Settings 100 Route lef EE 60 DCL UE 61 108 DOW MO AG EE 59 SUE 59 San Ee E 62 82 Route mtormation cece ees 73 Route polannimg 55 Route Preferences ccccceeeeeeeeees 86 Route section BIO CK EE 79 URDIOCK ER 81 Routes Editing the list of waypoints 57 WIR te 58 S Scrolling Wheel cccceeeeeeeeeeeeees 7 SCC E EI EAE E itary Laat 7 Settings ET RE 85 ge ee a EEN 93 Sa ele e n EE 93 Battery Status ui ee eet ebe 92 97 Siglely ga 96 CHEK e DEER 96 euni EE 90 Current Gpeed 90 Current street name 90 CUPFENE MNE sii Ae ee erte Bebe 89 Day Night Display 85 DEMO MOOS onirin 95 Destination Info 91 Displayed Information 005 89 Battery Status EE 92 COMpaSS neti EE 90 Current Gpeed 90 Current street name
20. ION mode The uniqueness of this mode is that the address field appears in the lower half of the display Navigate A Nearby POI Your current location is marked by a red triangle Above the triangle you can see a crosshair 2 Change the map section that is being displayed in such a way that the point to which you want to navigate is visible on the map You will find information about working with the map in A chapter Working with the map on page 65 3 Touch briefly on the destination point The crosshair appears at the position you have touched The name of the street in which your destination is located then appears in the address field If you have touched on a point of interest the name of the point of interest appears A8 Entering a destination Navigate Nearby POI User s manual AVIC S1 You have the following possibilities Start navigating to the point under the crosshair Look for a point of interest in the vicinity of the crosshair Proceed as described in chapter Point of interest in the vicinity page 37 as of section 4 If you have specified a destination for the address book instead of the Navigate button the OK button appears Touch to accept the point under the crosshair in the address book If you have specified a waypoint the Add button appears instead of the Navigate button Touch to accept the point under the crosshair as the waypoint 4 4 Administering destinations O
21. N window now opens Destination settings Address Search Destination History 28 Entering a destination User s manual AVIC S1 4 3 2 Specifying destination state province It is possible to search for cities and some points of interest only within a specific region The region is displayed on the Region button in the lower right hand corner of the display 1 If the city or point of interest is situated in a different state province to the one that is shown then tap on the Region button The REGION window opens 2 Use the Up and Down buttons or the scrolling wheel to scroll through the list of states provinces 3 Touch the region in which the destination is located Navigation 29 User s manual AVIC S1 4 3 3 Entering a destination address There are various methods for entering addresses Choose Ze Zei Address city street house number if you know the complete address of your destination City center only city name to be guided to the center of a Specific city or if there are no roads around your destination Zip code zip code street house number if you would prefer to enter the zip code of your destination Intersection city street intersecting road if the destination road is very long and you do not know the house number but you do know the name of an intersecting road Address city street house number 2 a 30 Open the DESTINATI
22. ON window refer to page 28 In the DESTINATION window tap on the Address Search button The keyboard appears with the City entry field Note If the Region button in the right lower corner of the display does not show the state province in which your destination is located then touch to specify the state province refer to Specifying destination state province page 29 Enter the destination city Note The last 8 cities from the displayed state province that you have entered as destination city are listed chronologically If you want to enter one of these cities then touch the selection As soon as the destination city appears in the list above the keyboard touch to select Entering a destination Navigation User s manual AVIC S1 The keyboard appears with the Street entry field Enter the destination street Note The last 8 streets from the destination city that you have entered as destination street are listed chronologically If you want to enter one of these cities then touch the entry to select As soon as the destination street appears in the list above the keyboard touch to select The keyboard appears with the House number entry field 7 Enter the house number As soon as the house number appears in the list above the keyboard touch to select If you do not know the house number or do not want to specify it touch the No number button The route is calculated Once th
23. Pioneer sound vision soul User s manual AVI C S1 as of may 2006 Copyright The information contained herein may be changed at any time without prior notification This manual nor any parts thereof may not be reproduced for any purpose whatsoever without the written consent of Pioneer nor transmitted in any form either electronically or mechanically including photocopying and recording Copyright 2006 PIONEER Corporation All rights reserved Table User s manual User s manual AVIC S1 of contents LP HUEFOGUCTION DEEN 5 de ADOUL THIS an AU EE 6 nn EE 6 Lis SCONVCNEONS gegen 6 1 1 3 Symbols mtbeManual orere a 6 LLA e Kannt e e KEE 7 1 2 LEGALNO EE 8 LZ ODM EE 8 der gt eeng EE 8 1 3 DOD ORE EE 9 1 4 The basic principle Of navigation 10 Using the AVI C S1 for the First Time see 11 ZA Power supply and charging the batter 12 SZ VE AE NOMIC vest EE 12 P S NOERMMCHCAK ege AE ebe ee eebe 12 2153 ENG OF FECHA e Ur e DEE 12 2 2 Switching on the AVIS 13 2 3 Basie SENNO E 13 Operating the navigation software NK KKK 19 3 1 HarawWaore KOYS EE 20 3 2 SoftWare KEY DO le WEE 21 3 2 1 Enter characters with the touch screen keyboard 21 3 5 Command OULLON Seid acess tieckiioceeyis ais corse neta tein anageeas 23 Navigatio siicsisuccanciiascanenwaradecnentumennntederednendeneduteneden 25 4 1 General information ON navigation 26 4 2 StaruinGsAV C BEE 27 4 3 Entering a destinatii einar EECH
24. SE AGREEMENT found on the included manual El 2 Read the message and touch OK if you agree to the written warning The DESTINATION window opens DESTINATION window Eh In the DESTINATION window you may enter a destination process routes or view the map Destination settings Address Search o Destination a History Note Unless you turn off the main power on the back of the W unit you will return to the last screen you were on before turning off the power button at the top of the unit Navigation 27 User s manual AVIC S1 4 3 Entering a destination Basis of navigation This section describes the various ways of entering selecting and managing a destination on the AVIC S1 Map views during navigation are described in chapter Map views On page 69 Note The settings that are specified in the settings window Y ROUTE PREFERENCES are taken into consideration when calculating the route for the entered destination For further information please refer to chapter Configuring A AVIC S1 on page 83 4 3 1 Opening the DESTINATION window Opening the Specifying a destination or planning a route always starts in the DESTINATION window DESTINATION window You can open the DESTINATION window as follows If you can see the map 1 Press the MENU key to the right at the bottom of the display If a different window is opened 1 Press the MAP key The map opens 2 Press the MENU key The DESTINATIO
25. Scrolling Wheel ccceeeeeeeeeeeeees 7 Se EE 7 STI NEE 7 Hee 7 WNA OW aa aO 7 TOP ioaea aE 7 Terms e DEE 7 len LEE 67 Time Format 15 100 Bleu 15 99 U WADIOCKING EE 81 W Waypoint Next destination ssssssssrererersrn 78 Skip next waypoint cce cece ees 78 Waypoint ln e EE 91 VAY gel Le EE 78 WO OW EE 7 109
26. Touch the Regional Settings button The REGIONAL SETTINGS window opens Regional Settings Back Language Time zone Time Format Distance In the REGIONAL SETTINGS window you can carry out the following settings Regional Settings User s manual AVIC S1 7 13 1 Language Language With this setting you specify the language the user interface of the software and the spoken driving directions should be The current setting is shown on the button 1 Touch the button to open the LANGUAGE window 2 Touch the language in which you wish to operate the system You can scroll through the list using the Up and Down keys If your language is not displayed touch the More Mas Plus button to view more languages As soon as you select the language an information window opens that informs you that need to restart the machine 3 Touch the OK button The system switches off and then back on again The chosen language is used for the user interface and the speech instructions 7 13 2 Time Zone Time Zone With this setting you can establish valid time zones for your location This setting is important for the correct calculation of probable arrival times Touch the button to open the TIME ZONE window Time Zone The current setting is shown on the button 1 Touch the button to open the TIME ZONE window 2 Touch the time zone that applies to your location Use Up and Down to scroll through the list The display of the m
27. age 62 Return to the ITINERARY window 4 5 7 Displaying information regarding the route Overview Conditions Navigation You can view detailed information about the route for example driving time and overall route lt You have planned or downloaded a route as described in Indicating waypoints on page 53 and Download routes on page 56 The route is calculated as described in Calculating the route on page 57 and is displayed on the map Touch the Details button The ROUTE I NFO window opens The list shows for each waypoint the distance from the previous waypoint and the estimated driving time for this section of the trip In addition the lower edge of the screen displays the total distance of the route from the first to the last waypoint and the estimated duration of journey for this route 61 User s manual AVIC S1 4 5 8 Simulating a route Simulation Condition Stop simulation a You can also simulate a navigation Note You do not need GPS reception in order to simulate a route Only routes of max 60 miles in length can be simulated You have planned or downloaded a route as described in Indicating waypoints on page 56 and Load route on page 59 lt The route is calculated as described in Calculating the route on page 60 and is shown on the map 1 Touch the Simulation button The route is recalculated for the simulation After the calculation the simulation
28. ajor cities of the respective time zone should help you to choose the correct one The TIME ZONE window is shown again Daylight Saving Time The current setting is shown on the button 3 Touch the Daylight saving time button to change the setting Setting Meaning On Daylight saving time is switched on Off Daylight saving time is switched off Configuring AVIC S1 99 User s manual AVIC S1 7 13 3 Time Format Time Format With this setting you establish which units of measurement Should be used for times The current setting is shown on the button Touch the button to change the setting Setting Meaning 24h Displays the time in 12 hour format 12h Displays the time in 24 hour format 7 13 4 Distance Distance With this setting you establish which units of measurement Should be used for the distances The current setting is shown on the button Touch the button to change the setting Setting Meaning Kilometres Displays the distances in kilometres Miles Displays the distances in miles 7 14 Product Information Product Information The name and version of the software Is displayed in the PRODUCT I NFORMATION settings window Touch the button to open the PRODUCT INFORMATION window Guided Tour Touch the Guided Tour button to have the most important functions of the software explained 7 15 Restore Factory Settings Restore Factory Use this setting to restore to factory settings settings Touch the button to
29. arched location or street name appears on the list just touch to select it Note In order to scroll through a list you may also use the Scrolling Wheel on the device When the searched location or street name is highlighted simply press the Scrolling Wheel to Select it A WEL 27573 Roxboro North Carolina ABARRUS 276107 Midland North Carolina Tap the icon to enter a space between two words Tap the icon to delete the character to the left of the cursor Tap the icon to enter numbers e g for a Zip code search Tap the icon to return to character entry mode Software keyboard Special characters User s manual AVIC S1 Tap the Sym icon to enter a special character The special characters keyboard appears Tap the You need not enter special characters when entering a destination s city or street name but they may be helpful for entering names for saved destinations and itineraries icon to return to character entry mode 3 3 Command buttons Command buttons Back Most of the AVI C S1 screens have the following buttons Back To a map displays the map in standard view To a different window opens the last window you were at To the left right Move into other menu options Show on map In a list touch this button to the right of entry to show location on the map Operating the navigation software 23 d Navigation Topics covered in this chap
30. bols have the following significance Symbol Time Significance The device is connected to an external power supply The battery is charged The LED on the device shines green The device is connected to an external power supply The battery is being charged The LED on the device shines red The device is being supplied by its internal battery The charge state of the battery is sufficient The number of blue segments on the battery indicates its charge state 2 or 3 segments The device is being supplied by its internal battery The charge state of the battery is weak The number of blue segments on the battery indicates its charge state 0 or 1 segment A message box informs you when the charge state of the battery becomes insufficient The current time is displayed _ 67 User s manual AVIC S1 5 2 Zoom Zoom level Scale In all views the map can be displayed in various zoom levels When you have started navigation the auto zoom mode is activated the zoom level adapts automatically depending on your speed When you touch either the Zoom in or the Zoom out button the zoom level bar displays The scale is shown to the left alongside the Zoom in button on the lower edge of the display A short distance piece shows the reference distance on the display The number above this indicates which distance this reference refers to in reality Zoom out Touch the Zoom out button in order to increase t
31. c can now be used Repeat the process if you are not happy with your choice and wish to try out a different graphic 7 9 Autozoom Autozoom Configuring AVIC S1 This setting only affects the map when it is in the Standard map view and if the map is shown in 2D With this setting you can establish whether during a navigation with 2D display should have a high autozoom standard autozoom or low autozoom Autozoom means that the zoom intensity changes depending on your speed if you drive slowly the scale reduces Drive quicker and the scale increases The more intense the autozoom the smaller the map s scale The current setting is shown on the button Touch the button to change the setting Setting Meaning Standard Standard autozoom High High autozoom Low Low autozoom _ 93 User s manual AVIC S1 7 10 Home Address Home Address In the HOME ADDRESS settings window you can specify your home address and therefore you can also quickly navigate from any location to your home 1 Touch the Home address button The HOME ADDRESS window opens 2 Touch the Change button and enter your home address Refer to chapter Entering a destination page 28 The address is now shown in the HOME ADDRESS window 7 11 Phone Menu Phone Menu 94 8 A telephone application is installed on your device With this aid of this you can connect your mobile telephone to the device via Bluetooth Once a connection is cr
32. d c ccc cceeseeeeeeeeeeees 90 CURE CTI WG aeaaea tiie 67 D Day Night Display 00ee eee es 85 DEMO MOG EE 95 Destination Address book ENNEN 45 Destination HIStory 0ceeeeees 44 Home Address 46 Points of Imterest e eee ees 37 La CILY EE 40 Nationwide c cece eee cece eeeeeeeeeees 42 KS go EE 37 Recent destinations ccceeeeeeeees 44 Select ON map 47 Destination Info 91 Destinations Index User s manual AVIC S1 ACIMINISTCR Ee get Ee EEN 49 RISCH 61 Dialog VWmdow aiisiaerria an 7 DIS ei E EE 7 Displayed Information 89 Displayed TiN LTE 91 BIEN 100 Distance Unit 16 E ENC e EE 67 G ER EE 98 E E 10 92 GPS dE lee EE 66 SIGN GIS tsi E 10 GPS SACU EE 97 Guided Ke Te 100 H lge UE TEE 95 ELE 98 PUIG NGING aed Bree taae octet eas oan 7 Home Address cccceeeeeeeeeeees 46 94 I INDUC 2 Le EE 7 INtrOGUCTION c cece cece a 16 LUNETA GE 55 K Eelere 7 ET ge WEE EN L Bunter et 14 99 List Of WAYPOINTS cece eee eee seen ees 57 M Manual Arrangement EE 6 User s manual AVIC S1 ele uge LEE 6 SV MOIS eet 6 Map 20 S E EE 85 AUTOZOOM cece ccc ceceueueeeeeueeuees 70 72 BUTEONS EE 70 Day Night Display 85 Displayed Information 65 89 MAD SE 85 MOVIN Orena n EE 72 73 Orientaton cccceceeceeeeeeeeeeeeeeeuees 85 Overlay PO ee eene ies 87 Route mtformation 73 Search for destimation 71 Show
33. e DESTINATION window opens In the DESTINATION window tap on the SETTINGS tab The SETTINGS window opens Destination settings Orientation Map Type Day Night DREN Route Overlay POI Preferences 3 Touch the Route Preferences button Useful functions for navigation 8l User s manual AVIC S1 6 5 Simulation The ROUTE PREFERENCES window opens Route Preferences Back Speed Route Type Interstates profile Ferries Tollways Recalculate Carry out the desired changes to the routing options Detailed information regarding establishing the routing options can be found in chapter Configuring AVIC S1 on page 83 Tap on the Recalculate button The route is then recalculated Navigation then continues while taking into account the new route preferences Overview Once you have planned and calculated a route you can start a simulated route guidance For more information refer to chapter Simulating a route on page 62 Note You do not need GPS reception in order to simulate a Y route Only routes of max 60 miles in length can be simulated 82 Simulation User s manual AVIC S1 7 Configuring AVIC S1 Topics covered in this chapter 7 1 Opening the SETTINGS window page 84 7 2 7 3 7 4 7 5 7 6 7 1 7 8 7 9 Orientation Map Type Day Night Display Route Preferences Overlay POI Displayed Information Current Time Current Street Name Compass Current Speed Destina
34. e Preferences Recalculate 8 User s manual AVIC S1 Option Meaning Permitted With this option the respective road type will be incorporated in the calculation of the route Avoid With this option the respective road type will be avoided if possible Forbidden With this option the respective road type will not be incorporated in the calculation of the route This button is only available during navigation and after a route calculation during route planning if the settings are changed 5 Touch the Recalculate button in order to recalculate the route based on the changed settings Please refer to chapter Change route preferences on page 81 7 6 Overlay POI Overlay POI Configuring AVIC S1 In OVERLAY POI you can establish which point of interest categories should be displayed on the map If a category also has Subcategories you can also select individual subcategories 1 Touch Overlay POI The OVERLO POI window opens Overlay POI Back Bl None Gas Station w of TE Restaurant Hotel or Motel The current setting is shown in the box to the right alongside the respective point of interest gt lv This category will be shown on the map gt a This category will not be shown on the map gt EI This category includes subcategories of which one or more will not be shown on the map 87 User s manual AVIC S1 Show all categories Show no categories Show hide specific categor
35. e calculation has ended and there is a sufficient GPS signal the map will be displayed and route guidance will begin DEA User s manual AVIC S1 City center only city name L 2 Open the DESTI NATION window refer to page 28 In the DESTI NATION window tap on the To the right button 3 Touch the City center button D e i The keyboard appears with the City entry field Note If the Region button in the right lower corner of the display does not show the state province in which your destination is located then touch to specify the state province refer to Specifying destination state province page 29 Enter the destination city Note The last 8 cities from the displayed state province that you have entered as destination city are listed chronologically If you want to enter one of these cities just tap on its entry As soon as the destination city appears in the list above the keyboard touch to select The route is calculated Once the calculation has ended and there is a sufficient GPS signal the map will be displayed and route guidance will begin Entering a destination User s manual AVIC S1 Zip code zip code street house number Navigation Open the DESTINATION window Refer to page 28 In the DESTINATION window touch the To the right button Tap on the Zip Code Search button The keyboard appears with the Zip code entry field Note If the Region button in
36. eated in the case of incoming calls the telephone application is automatically displayed on top of the navigation This way whilst navigating you can use the device as a hands free unit and accept incoming calls Using the telephone application you can also make calls and view incoming made or missed calls 1 Touch the Phone Menu button in order to open the telephone application and generate a Bluetooth connection with your mobile telephone Refer to the User manual part 2 Hardware and Bluetooth on the DVD for detailed information on how to use the telephone application Home Address User s manual AVIC S1 7 12 Hardware Hardware In the HARDWARE settings window you can carry out some hardware specific settings and view detailed information regarding the current GPS and battery status 1 Touch the Hardware button The HARDWARE window opens Demo Mode Click sound Brightness GPS status You can carry out the following settings in the HARDWARE window 7 12 1 Demo Mode Demo Mode With this setting you can establish whether the demo mode Should be launched if you do not operate the device for more than 5 minutes and you are not currently navigating Demo mode plays a brief overview of the AVIC S1 range of options You can cancel this by tapping anywhere on the touchscreen The current setting is shown on the button Touch the button to change the setting Setting Meaning On Demo mode is switched on Off D
37. eeeees 71 5 3 3 View destination map View 72 5 4 Showing the map during navigation 73 6 Useful functions for navigation KREE ENEE KKK KK e 77 6 1 WAY DOMES eeh td needa advices e Dee 78 6 2 gilt ag el 78 6 3 Blocking a route section 79 6 4 Change route Preferences ccccccccceeeeeeeeeeeeeeeeeeeseeneennees 81 6 5 SMA Re EE SR 7 Configuring AVI CHS geben ge eges egene deg eege EEN 83 7 1 Opening the SETTINGS WINGOW cccccccseeeeeeeeeeeeeseeeeeneeees 84 7 2 Belg e e EES 85 7 3 Dap TY OC eet e e eege ee 85 7 4 Day 7 NIONE DIS DIAY EE 85 LD Route PFETEleNCe EE 86 7 6 OVERAY POL EE 87 7 7 Displayed Eege gan UoN EE 89 S Ee DE e ig e age un 89 7 7 2 Current Street Name 90 Tete COMDOSS iceteutioniMeensett comer vests Ee 90 K EN CUPFENU SDCCO EE 90 KEN SE ge E e tele n e EE 91 K a E EE d e ele Ae A e EE 91 7 7 7 Displayed Tume ccc ceeeee eee eeeeeeeeeeeeageeeeeees 91 7 7 8 Street names ON mapt Di ce eeee eee e eens 92 AS GPS 7 C rrent POSION ett GENEE AER 92 Jede kA NR WE E 92 7 8 Stesel le EE 93 7 9 PULOZO OI VE 93 710 HOME AGOESS aea EE 94 KLL IPHONE Eeer EE A 94 PAZ Maawal ction E 95 dech DEMO MOGE ge dee e Ee 95 7 AZ oe CICK SOUNO tee 96 eler BONOS oreren iaa te rep Dee Zerf ee reide 96 71254 Battery Slats E 97 n I GPI SAUS EE 97 ii Table of contents User s manual User s manual AVIC S1 72 43 REGION al SCUUINGS ee ee 98 Pek le Ee re ET e 99 ee WMS ZONG
38. eft buttons in order to view additional setting possibilities You can carry out the following settings in the DISPLAYED NFORMATI ON window 7 7 1 Current Time Current time With this setting you can establish whether the map should show the current time The current setting is shown on the button Touch the button to change the setting Setting Meaning Show The current time is shown Hide The current time is not shown Configuring AVIC S1 89 User s manual AVIC S1 7 7 2 Current Street Name Current street name 7 7 3 Compass Compass With this setting you can establish whether the name of the street on which you are currently driving should be displayed The current setting is shown on the button Touch the button to change the setting Setting Meaning Show The street name of the street on which you are currently driving is shown Hide The street name of the street on which you are currently driving is not shown With this setting you can establish whether a compass should be shown on the map It is practical to show the compass during navigation if the map IS driving direction If the map is shown in 2D during navigation by tapping on the compass you can switch between North alignment and Drivin direction The current setting is shown on the button Touch the button to change the setting Setting Meaning Show The compass is shown Hide The compass is not shown 7 7 4 Current Speed Curre
39. emo mode is switched off Configuring AVIC S1 95 User s manual AVIC S1 7 12 2 Click sound Click sound With this setting you can establish whether there should be a click sound when tapping on the device s touch screen or not The current setting is shown on the button Touch the button to change the setting Setting Meaning On Click sound is switched on Off Click sound is switched off 7 12 3 Brightness Brightness In the BRIGHTNESS Settings window you can establish the brightness for the daylight and nighttime display 1 Touch the Brightness button The BRIGHTNESS window opens E Brightness day The current degree of brightness is displayed between the two buttons and Touch the button to increase the value Touch the button to reduce the value Brightness night The current degree of brightness is displayed between the two buttons and Touch the button to increase the value Touch the button to reduce the value Touch Back in order to close the BRIGHTNESS window O6 Hardware User s manual AVIC S1 7 12 4 Battery Status Battery Status The BATTERY STATUS window includes information regarding the current charge status of the battery 1 Touch the Battery Status button The BATTERY STATUS window opens Battery Status Back Reloading Battery The battery symbol shows the current charge status The meaning of the symbol is displayed
40. entioned above refer to chapter Displayed Information on page 89 A Working with the map 75 6 Useful functions for navigation Topics covered in this chapter 6 1 Waypoints 6 2 Skip next waypoint 6 3 Blocking a route section 6 4 Change route preferences 6 5 Simulation Useful functions for navigation User s manual AVIC S1 page 8 page 8 page 9 page 81 page 82 ae rae User s manual AVIC S1 Survey The following functions are available during navigation or after calculating a planned route 6 1 Waypoints Waypoints during navigation This is how you enter a waypoint During navigation you can enter a new waypoint at any time The route is then recalculated so that the next destination will be this waypoint After reaching the waypoint the guidance to the remaining locations will continue Condition The map is displayed in STANDARD map view 1 Press the MENU key The DESTINATION window opens In the DESTINATION window touch the To the right button Touch once again the To the right button Then touch the Way Point button Enter the waypoint refer to chapter Entering a destination page 28 St ae a ZS The route is then recalculated and the entered waypoint is approached as the next destination 6 2 Skip next waypoint Skip Next Waypoint 78 Skip Next Waypoint This function is only available when you are navigating a route with at least two indicated waypoints
41. erent views Each of these views represents differing functions but you can zoom and view the status in all of the views AVIC S1 offers you the possibility to display in great detail which information points of interest and status displays you would like to show on the map For more information refer to chapter Displayed Information as of page 89 5 1 Status displays GPS GPS status 66 GPS The GPS symbol is displayed at the right margin of the map window The number on the GPS symbol indicates how many GPS satellites are being received The different symbols have the following meaning Symbol Significance fo An insufficient number of satellites No Signal with adequate signal strength are being received It is not possible to navigate or perform positioning This is the case e g if you are located in an indoor parking structure Sufficient satellites with adequate GPS ready signal strength are being received Navigation can start Detailed information regarding the current GPS status can be displayed any time in the GPS STATUS window It includes among others information about your current location and your current speed For a detailed description on how to display the GPS status window refer to chapter GPS Status as of page 97 Status displays Time Working with the map Energy User s manual AVIC S1 The Energy symbol is placed at the right margin of the map window The different sym
42. etting Meaning Show The waypoint information is shown Hide The waypoint information is not shown 7 7 7 Displayed Time Displayed Time Configuring AVIC S1 If you have set the display of destination information and waypoint information you can use this setting to establish which information should be shown in addition to the distance See Destination Info page 91 and Waypoint Info page 91 The current setting is shown on the button Touch the button to change the setting Setting Meaning Arrival The probable time of arrival is shown above the distance display Duration The remaining driving time is shown above the distance display 9 User s manual AVIC S1 7 7 8 Street names on map 2D Street names on map With this setting you establish whether the street names should be shown on the map This display can be useful if you are looking for a specific street as a destination The current setting is shown on the button Touch the button to change the setting Setting Meaning Show The street names will be shown Hide The street names will not be shown 7 7 9 GPS current position GPS current position 8 With this setting you establish whether the GPS symbol should be Shown on the map The GPS symbol offers information regarding whether the received signal is sufficient and strong enough for navigating or positioning For more information on the GPS symbol refer to the chapter Status display
43. fs tall buildings tunnels bridges and in some cases bad weather Depending upon where you are it may take a short time for the Navigation System to re establish your position after a GPS satellite signal is re acquired Caution Other wireless devices in the vehicle may interfere with the reception of GPS satellite signals and cause the reception to be unstable Caution In order to prevent theft and or sun heat damage remove this Navigation System from its mount when it is not being used Caution The windshield on some vehicles contains a special metallic coating that could block GPS satellite signals from this Navigation System In such cases it may be necessary to use an external antenna outside the vehicle When you have reached your destination the system pronounces the message You have reached your destination The map is no longer presented in navigation mode A small green arrow indicates your current position General information on navigation User s manual AVIC S1 4 2 Starting AVIC S1 How to start the 1 Switch on your device AVIC S1 A window with the following message appears WARNING A navigation system is only a driving aid and not a substitute for attentive and safe driving Always observe and obey all laws and road signs even if they contradict the instructions of the navigation system Review the manual Do not operate this product while driving By pressing the OK key you accept the LICEN
44. he map scale The map section shown will become larger but there will be less detail Zoom in Touch the Zoom in button in order to reduce the map scale The map section shown will become smaller but there will be more detail Zoom level bar Harmi EE The red zoom controller shows the current level of zoom Lol To the left of the zoom level bar there are some buttons using which you can set a specific map scale D Smi 68 Zoom User s manual AVIC S1 Note In all views zooming is only possible when the map is o being displayed in 2D mode Note Once the zoom level has been changed manually the auto zoom mode is deactivated 5 3 Map views Overview The map can be shown in three different views Inthe Standard map view Inthe Search for destination view Inthe View destination view Each of these views makes available different functions that are explained in the pages to come 5 3 1 Standard map view The STANDARD map view opens when you start navigating It also opens when you press the MAP key 22 mph W Wt Harris Blyd The following properties are typical for this view The current position is shown by a red triangle in the centre of the lower third When you move the triangle doesn t change its position on the screen Instead of this the map section follows your direction of movement The scale of the map changes depending on your speed Working with the map 69 Use
45. he point of interest to which you would like to drive ae User s manual AVIC S1 The route is calculated When the calculation is completed route guidance will begin No Point of Interest If no point of interest with the specified categories is found in the found Specified city then a dialog window appears with the following message The area doesn t contain any Points of Interest of the selected category 1 Touch OK in order to return to the SUBCATEGORY window Point of interest of regional significance 1 Open the DESTINATION window Refer to page 28 2 In the DESTINATION window touch the POI Search button 3 Touch the Nationwide button The CATEGORY window opens Points of interest Back All categories i Airport Wi Shopping center r fo Tourist Nature ia 22 ia 22 ge Ny Note If the Region button in the right lower corner of the display does not show the state province in which your destination is located then touch to specify the state z province refer to Specifying destination state province page 29 4 Use the Up and Down buttons or the scrolling wheel in order to scroll through the list of categories A2 Entering a destination No Point of Interest found Navigation User s manual AVIC S1 5 Touch the category in which you wish to find a point of interest If you do not want to specify a category touch All categories topmost entry The POINTS OF INTER
46. ies subcategories 88 Touch the All button in order to show all the points of interest on the map Touch the None button in order to show no points of interest on the map Categories without subcategories Touch the box for the respective category in order to activate box with checkmark or deactivate empty box the display Categories with subcategories 1 Touch the box for the respective category A window opens with all the subcategories of the chosen category Je None Agip z mia Aral Touch the All button in order to show the category in the map or Touch the None button in order not to show the category in the map Di or Touch the button for the respective subcategory in order to activate box with checkmark I or deactivate empty box Eh its display Then touch the Back button Overlay POI User s manual AVIC S1 7 7 Displayed Information Displayed In DISPLAYED INFORMATION you can establish which information Information will be displayed on the map The majority of this information is only relevant for the navigation and is only available in the map view whilst navigating Refer also to chapter Showing the map during navigation on page 73 1 Touch Displayed I nformation The DISPLAYED INFORMATION window opens Displayed Information Back Current Current Compass Time street Name Current Destination Speed Into Ze Touch the To the right and To the l
47. ith the touch screen keyboard You can enter all entries with the touch screen keyboard But you may enter capital letters only You need not enter small letters or special characters when entering a destination s town or street name AVI C S1 replaces these characters automatically When you are looking for eg a Canadian city called Vercheres simply type VERCHERES Smart keyboard The system has a database and therefore knows which cities or Streets begin with the character combination you have entered As soon as you have entered a character the system deactivates all characters that do not exist in combination with the ones already entered A WEL 27573 Roxboro North Carolina ABARRUS 26107 Midland North Carolina The city or street names that begin with the previously entered character combination will be listed above the keyboard Operating the navigation software 21 User s manual AVIC S1 Entering a space deleting a character Switching between character and number entry 2 If a street name or name of a point of interest consists of several words you can type in the start of each of these words For example to search for John F Kennedy Ave you can enter JOH or also KEN However in the case of city names that consist of several words you can enter only the first letters of the first word Use the Up and Down buttons to scroll through a list When the se
48. l A field in which data can be input Input fields are generally labelled with text situated either above the input field or at the start of the input field Item which is currently selected from a list of options You can change your selection by using the scroll wheel The scrolling wheel is located under the display in the center You can move Up and Down using the scrolling wheel and also select an entry by pressing down on the scrolling wheel Brings up MENU and MAP window Touch the screen on check box to activate certain entries Use the scrolling wheel to highlight entry of choice User s manual AVIC S1 1 2 Legal notice 1 2 1 Liability Limitation of liability The software and the manual are subject to change without notice Pioneer may not be liable for the correctness of the information contained in this manual nor for damages resulting from the use of this manual To improve the quality of our products and our services we appreciate all suggestions for improvement and all error notices 1 2 2 Trademarks Registered trademarks All brands and trademarks mentioned in this document are possibly registered by third party and subject to the current legislation and to the rights of their respective owners without reservation All mentioned names of products societies or brands may be registered trademarks of their respective owners Every right that is not explicitly accorded is reserved The absence
49. lates the longitude and the latitude of its own current position The signals of at least three satellites are needed to determine the longitude and the latitude With the signals of at least four satellites the elevation may be calculated too The determination has an accuracy of about 3 yards The Horizontal Dilution of Precision HDOP indicates the quality of position determination Theoretically any value from O to 50 is possible The smaller the value is the more accurate is the position determination value 0 no deviation from the actual position Values up to 8 are convenient for street navigation Point of Interest POI See Point of Interest Points of Interest are covered by the map and may be displayed on it Harbors airports restaurants hotels gas stations public buildings and others belong to the special destinations You may determine special destinations as itinerary points for navigation purposes 105 10 Index 2 EE ESA 85 A FON i AV f gt ee e 7 Arrangement of the Manual 6 AUTOZOOM 2 cece ccc ce cee eae 93 AVIC S1 E EE EE 2 B Background EE 93 Basi SEWN EE 13 BAOL Y Seeerei Steet 92 Chal deine aaa 12 Charging Status 12 EI LEE 67 Battery Status cccccc cece cence eee eee 97 BIOCKING EE 79 BONNES Serart 96 BULOM EE 7 C EE ENEE regard brtreferg eg DE eer 96 COMPASS ee ee 90 Conventions in fheManual 6 CURFENUsioniccsaviieentneew awd eE ie 89 90 Current Spee
50. lculated Once the calculation has ended and there is a sufficient GPS signal route guidance will begin Entering a destination User s manual AVIC S1 4 3 4 Specifying points of interest Points of Interest Points of interest also Known as POI are included in the navigation system s database Included as points of interest are airports and harbors restaurants hotels gas stations public facilities doctors hospitals shopping centers and others Points of interest can be displayed using a symbol on the map Refer to Chapter Overlay POI on page 87 for more information Points of interest can also be entered as navigation destinations Different processes are defined for specifying points of interest Choose Point of interest nearby if for example you are looking for the next gas station or a restaurant in the vicinity Point of interest in a specific city if for example you are looking for a specific theater or a restaurant in a specific city Point of interest of regional significance if for example you are looking for the next airport or train station Point of interest nearby Navigation a Note Points of interest from the current surroundings can only be specified if the GPS reception is sufficient for positioning 1 Open the DESTINATION window Refer to page 28 2 In the DESTINATION window touch the POI Search button 3 Touch the Nearby button The CATEGORY window opens Poi
51. nt Speed 90 With this setting you establish whether the map should show your current speed as is calculated from the GPS positioning data The speed is shown in the unit you have specified for the AVIC S1 refer to Distance page 100 The current setting is shown on the button Touch the button in order to change the setting Setting Meaning Show Your current speed will be shown Hide Your current speed will not be shown Displayed Information User s manual AVIC S1 7 7 5 Destination I nfo Destination Info With this setting you can establish whether the distance left until you reach the destination and depending on setting the probable arrival time or the remaining driving time should be Shown Refer to Displayed Time page 91 The current setting is shown on the button Touch the button in order to change the setting Setting Meaning Show The destination information will be shown Hide The destination information will not be shown 7 7 6 Waypoint I nfo Waypoint Info This information is only visible if you are navigating a route that has at least two indicated waypoints With this setting you establish whether the distance left until you reach the next waypoint and depending on setting the estimated time of arrival or the remaining driving time should be Shown Refer to Displayed Time page 91 The current setting is shown on the button Touch the button in order to to change the setting S
52. nts of interest Back All categories d i Gas Station E Parking wh Restaurant Hotel or Motel _ CC 4 Use the Up and Down buttons or the scrolling wheel to scroll through the list of categories _ 37 User s manual AVIC S1 38 5 Touch the category from which you wish to find a point of interest The SUBCATEGORY window opens The category that you have just chosen is specified at the top Bi Gas Station Back All categories SE Arco we SS A Mobil Use the Up and Down buttons or the scrolling wheel to scroll through the list of subcategories Touch the subcategory in which you want to find a point of interest If you do not wish to specify a subcategory tap on All categories topmost entry The POINTS OF INTEREST NEARBY window opens The subcategory that you have just chosen is displayed at the top It lists all the destinations of the specified category subcategory that can be found in a specific radius around your current location TOTAL 28205 Charlotte Linear distance z00ft SUNE 28205 Charlotte Linear distance 1600ft SHELL 28205 Charlotte Linear distance 0 86mi Wider Area Use the Up and Down buttons or the scrolling wheel to scroll through the list of points of interest Touch to select the point of interest you wish to drive to The route is calculated When the calculation is completed route guidance will begin Entering a destinati
53. o turn approximately when there are no longer any bars The red triangle shows your position on the map Ul 6 The waypoint information area is only visible when you are navigating on a planned route with at least 2 waypoints It shows the distance until you reach the next waypoint and depending on the settings the foreseeable arrival time or the remaining driving time You can hide this field When you are approaching the location for the next driving action the waypoint information is overlapped by the bar 4 The destination information area shows the distance until reaching the driving destination and depending on the settings the foreseeable arrival time or the remaining driving time You can hide this field g Your current speed is shown in the speed field as it is calculated from the GPS position data The speed is shown in the unit you have set for the AVI C S1 The speed shown here may slightly differ from your real soeed and must therefore not be used as a reference You can hide this field o The name of the road into which you should turn next is shown in the top road field If you are supposed to follow specific signs then these will be shown here N 74 Showing the map during navigation User s manual AVIC S1 The name of the road in which you are located at the moment is shown in the lower road field You can hide this field 10 For detailed information regarding the settings m
54. of an explicit labeling of registered trademarks does not allow the conclusion that this brand was not subject to the rights of third party Windows and ActiveSync are registered trademarks of the Microsoft Corporation Legal notice User s manual AVIC S1 1 3 Support Failure to Operate Should this Navigation System fail to operate properly contact your dealer or the nearest authorized Pioneer service facility To locate your nearest authorized Pioneer service facility please visit the Pioneer Electronics website http www pioneerelectronics com for USA or http www pioneerelectronics ca for Canada or call the Pioneer customer service telephone numbers listed below After sales Service for Pioneer Products Please contact the dealer or distributor from where you purchased the product for after sales service including warranty conditions or any other information In case the necessary information is not available please contact Pioneer as specified below Do not ship your product to the companies at the addresses listed below for repair without making advance contact U S A Pioneer Electronics USA Inc CUSTOMER SUPPORT DIVISION P O Box 1760 Long Beach CA 90801 1760 1 800 421 1404 Canada Pioneer Electronics of Canada Inc CUSTOMER SATISFACTION DEPARTMENT 300 Allstate Parkway Markham Ontario L3R OP2 1 877 283 5901 Introduction 9 User s manual AVIC S1 1 4 The basic principle of navigati
55. on AVIC S1 GPS based navigation Navigation with GPS 10 The stylish small and slim AVI C S1 offers smart navigation features like address and points of interest search In addition built in Bluetooth TM technology lets you wirelessly synchronize your compatible cell phone to the AVI C S1 for handsfree calling Pioneer s AVI C S1 makes getting there simple The Global Positioning System GPS was originally developed in the 1970 s aS a weapon guidance system for the Government of the United States of America GPS is based on 24 satellites which are in orbit round the earth and are permanently emitting signals The GPS receiver receives these signals and calculates based on the runtime of the signals their distance from the respective satellites This information allows for GPS devices to calculate your current geographic location The signals of at least four satellites are needed to determine the longitude and the latitude GPS accuracy is estimated to be within 3 yards The imbedded maps contain the geographic coordinates of the points of interest streets and cities in the database Thus the navigation system can calculate a route from a given start point to a given destination point When your navigation system receives the signals of at least four satellites it can determine your current position on the map This will start as your starting point for navigating Current position calculation occurs about once a
56. on No point of interest found Search within a greater radius Navigation User s manual AVIC S1 If no point of interest with the specified category is found in the vicinity of your location a dialog window appears with the following message The area doesn t contain any Points of Interest of the selected category Nider Area la Touch Wider Area in order to search within a greater radius OR lb Touch OK in order to return to the SUBCATEGORY window If the list of points of interest found is very short you can proceed as follows 1 Touch the Wider Area button The list now shows the points of interest within a greater radius You can repeat this process several times 39 User s manual AVIC S1 Point of interest in a specific city 1 Open the DESTINATION window Refer to page 28 2 In the DESTINATION window touch the POI Search button 3 Touch the In a City button The keyboard appears with the City input field Note If the Region button in the right lower corner of the display does not show the state province in which your Y destination is located then touch to specify the state province refer to Specifying destination state province page 29 4 Enter the city in which you are looking for a point of interest Note The last 8 cities from the displayed state province that you have entered as destination city are listed Y chronologically If you want to enter one of the
57. or destination Refer to the next chapter for more information Search for destination view on page 71 Map views User s manual AVIC S1 5 3 2 Search for destination view In the SEARCH FOR DESTINATION view you can select a destination directly on the map or gain an overview of a specific area For further information on how to select a destination on the map refer to chapter Selecting destinations on the map page 47 8 Back Ei om ee a d l A o Navigate Nearby POT The following properties are typical for this view lt An address field is shown in the lower third of the display Your current location is shown by a red triangle You will see a crosshair above the triangle lt Map is showing north lt The map is fixed and does not follow your position If you change this view whilst driving then the triangle that shows your position moves from the screen lt gt You can move the map in order to view a different map section Opening map view You can open the SEARCH FOR DESTINATION map view by pean Oe lt Touching the map if in STANDARD map view refer to DESTINATION Standard map view on page 69 Touching the Select from map button in the DESTINATION window refer to Selecting destinations on the map page 47 Back pack Touch this button to return to the window that was active prior to opening the SEARCH FOR DESTINATION view Working with the ma
58. p 71 User s manual AVIC S1 Moving the map Autozoom The Autozoom button is only visible if the zoom level bar is Showing and the map scale has been changed Touch this button so that the map scale automatically changes according to your speed if you drive slowly the map scale becomes smaller if you drive quickly the map scale becomes greater You can also move the map in the Search for destination view To do this touch the map keep the pen or finger pressed down and move the map area to the desired direction 5 3 3 View destination map view Open VIEW DESTINATION view DE ee d _ eo Back e CH Navigate Nearby POI If in a list you press on the Show on map button to the right alongside a list entry the map will open in the View DESTINATION map view You can view cities streets house numbers points of interest and recent destinations on the map The following properties are typical for this view The map is aligned north A destination is shown centered on the map A destination road or a point of interest is marked in orange House numbers are shown with a black dot You can move the map in order to view a different map section Map views User s manual AVIC S1 rl Touch the Back button in order to close the map and return to Back the previously opened list Moving the map You can also move the map in the View destination view To do this touch the map keep
59. p view 1 Press the MENU key The DESTINATION window opens 2 In the DESTINATION window touch the To the right button Touch once again the To the right button 4 Touch the Set Blocked Road button The SET BLOCKED ROAD window opens Set Blocked Road Back 5 By touching the respective button enter how long the blocked section of road should be Useful functions for navigation 79 User s manual AVIC S1 The route is recalculated Roadblock ahead the route is being recalculated The Set Blocked Road button is now replaced by the Unblock button Way Point Skip Next Waypoint Itinerary 22 mph Mallard Creek Rd The blocked section of road is shown in violet The new calculated route is shown in green 80 Blocking a route section Cancel block 1 User s manual AVIC S1 Press the MENU key The DESTINATION window opens In the DESTINATION window touch the To the right button Touch once again the To the right button Touch the Unblock button The block is then cancelled and AVI C S1 continues to route the originally calculated route 6 4 Change route preferences Overview During navigation you can change the route preferences perhaps because you now no longer wish to use the freeway This is how you This function is only available during route guidance change the route preferences Condition The map is displayed in STANDARD map view 1 2 Press the MENU key Th
60. pens Set 12h tampon format or 24h format for clock time indications Using the AVIC S1 for the First Time 15 User s manual AVIC S1 7 Specify whether times should be displayed in 12 hour format 12hr or in 24 hour format 24hr Distance Unit The DISTANCE UNIT window opens Set miles roi or kilometers kro for distance indications km 8 Specify whether distances should be displayed in kilometers km or miles mi Introduction The INTRODUCTION window opens You have finished the initial configuration of your device Do you want to see a short introduction on this product 9 Specify whether you would like to see a brief introduction to operating the navigation software Yes or No 16 Basic settings User s manual AVIC S1 The DESTINATION window opens after the introduction if applicable Destination settings Address POI Search search Address Destination aa Book History w m oo Using the AVIC S1 for the First Time 17 User s manual AVIC S1 3 Operating the navigation software Topics covered in this chapter 3 1 Hardware keys page 20 3 2 Software keyboard page 21 Enter characters with the touch screen keyboard 3 3 Command buttons page 23 Operating the navigation software 19 User s manual AVIC S1 3 1 Hardware keys Hardware Keys Left Key Centre YOL SEL PUSH EATER Right Key Switch device on off 20 The follo
61. r s manual AVIC S1 Back 9 ES a Auto page a Auto Route 70 In the STANDARD map view the following buttons are available Alignment of the map Red point shows up north the map is aligned so that north is always at the top Touch the button to align the map in accordance with the driving direction Red point is not pointing upwards the map is aligned so that the driving direction is always at the top Touch the button to align the map to the north Alignment to the driving direction is recommended for the navigation because the directions right and left on the map are then shown exactly as they are in reality Note North alignment is only possible when the map is being displayed in 2D mode In 3D mode north alignment is not possible Back The Back button is only visible if the zoom level bar is shown Touch this button to hide the zoom level bar and maintain the altered map scale Autozoom The Autozoom button is only visible if the zoom level bar is showing and the map scale has been changed Touch this button so that the map scale is automatically changed according to your speed if you drive slowly the map scale becomes smaller if you drive quickly the map scale becomes greater Show entire route The button is only visible if a route has been calculated Touch this button to view the entire route in the map Note By touching the map you can quickly change the map view to Search f
62. restore the factory settings 100 Product Information 8 Appendix Topics covered in this chapter 8 1 Appendix A Restoring the Software and Map Restoring the software Restoring the map Appendix User s manual AVIC S1 page 102 101 User s manual AVIC S1 1 Appendix A Restoring the Software and Map Overview a If the software and or map are damaged perhaps because the navigation device has been subject to strong electromagnetic radiation you can reinstall both of them On the supplied DVD you ll find an Installer Tool which guides you through the software and map installation Note The files can be copied either via a card reading device or via an ActiveSync connection Copying via a card reading device takes considerably less time If you want to copy files via an ActiveSync connection please first ensure that you have installed the Pioneer Sync Manager which you can find on the supplied DVD 8 1 1 Restoring the software Via USB Via card reader 102 a 1 Connect the navigation device to your PC via the USB cable Insert the AVIC S1 DVD in your DVD ROM drive The Installer Tool starts automatically N 3 Select your language 4 Click on Upgrade Restore Application 5 Click on MS ActiveSync 6 Follow the on screen instructions Note If the Installer Tool does not start automatically open Windows Explorer Select the directory for your DVD drive and double
63. s on page 66 The current setting is shown on the button Touch the button to change the setting Setting Meaning Show The GPS symbol will be shown Hide The GPS symbol will not be shown You can view detailed information regarding the GPS status at any time in the GPS STATUS window To do this read chapter GPS Status on page 97 7 7 10 Battery Status Battery Status 02 With this setting you can establish whether the battery symbol should be shown on the map The battery symbol gives you information as the charge status of the battery For more information on the battery symbol refer to chapter Status displays on page 66 The current setting is shown on the button Touch the button in order to change the setting Displayed Information 8 User s manual AVIC S1 Setting Meaning Show The battery symbol will be shown Hide The battery symbol will not be shown You can also obtain detailed information about the current battery status in the BATTERY STATUS window To do this refer to chapter Battery Status on page 97 7 8 Background Background In the BACKGROUND Settings window you can select a different graphic that you can use as a background graphic for your software The current setting is shown on the button 1 Touch the button in order to open the BACKGROUND window 2 Touch the graphic skin that you would like to use as a background The BACKGROUND window closes The new background graphi
64. se cities touch entry to select 5 As soon as the city appears in the list above the keyboard touch to select The CATEGORY window opens Points of interest Back All categories 2 Gas Station E Parking wh Restaurant v Hotel or Motel epek a S A0 Entering a destination Navigation User s manual AVIC S1 6 Use the Up and Down keys or the scrolling wheel to scroll through the list of categories Touch the category in which you d like to find a point of interest The SUBCATEGORY window opens The category that you have chosen is specified at the top Car Dealer Back All categories i f Audi BT e Mercedes Benz Benz Use the Up and Down buttons or the scrolling wheel to scroll through the list of subcategories Touch the subcategory in which you d like to find a point of interest If you do not want to specify a subcategory touch All categories topmost entry The POINTS OF INTEREST IN A CITY window opens The Subcategory that you have just chosen is specified at the top The keyboard appears below All the destinations of the specified category subcategory in which the specified city has been found are listed above the keyboard HARRELSON FORD 28217 Charlotte TOWN amp COUNTRY FORD 26212 Charlotte 10 Use the Up and Down buttons or the scrolling wheel in order to scroll through the list of points of interest 11 Touch t
65. selected waypoint from the list Delete Close menu Close menu Tap on this button to close the menu without changing the list of waypoints Close 4 5 5 Managing Itineraries Overview You may plan multiple itineraries You may save them and use them later for navigation purposes The ITINERARY window offers the following buttons for this function 58 Itinerary with waypoints Save route L 2 Load route 3 4 Navigation User s manual AVIC S1 Open the ITINERARY window refer to page 55 Touch the Save button in order to save a new route The ENTER ITINERARY NAME window opens Enter Itinerary Name OK Enter a name for the route Touch OK Note Only waypoints will be saved When you download a saved route it will have to be recalculated Open the ITINERARY window refer to page 55 Touch the Load button in order to download a saved route that you wish to either edit or navigate to The LOAD ITINERARY screen opens Load Itinerary Back SUMMER TOUR SPRING TOUR AUTUMN TOUR Use the Up and Down buttons or the scrolling wheel to scroll through the list Touch the route that you wish to download The ITINERARY window opens again The saved waypoints are entered in the list of waypoints _59 User s manual AVIC S1 4 5 6 Calculating the route V BT Ge a s 60 A planned routed can also be calculated without GPS reception so that you
66. started by touching this button Refer to chapter Home Address on page 94 for information on entering your home address 1 Open the DESTINATION window Refer to page 28 2 In the DESTINATION window touch the Return home button The route is calculated When route calculation is completed route guidance will begin Haven t Yet Entered If you haven t yet entered the home address a dialog window a Home Address appears The home address is not set Do vou WANE fo set jt now la Touch Yes to enter the home address now OR 1b Touch No to return to the DESTINATION window Ap Entering a destination User s manual AVIC S1 4 3 8 Selecting destinations on the map Via the standard map view Select via the Select on map button Navigation With this function you can select a destination directly on the map There are two possibilities of starting a destination search on the map Via the standard map view Via the Select on map button The standard map view option is the easier option 1 If the standard map view isn t opened then press the MAP key beneath the display The map opens ee ee 22 mph W Wt Harris Blyd Tasen 9 la Touch any point in the map et 1 Open the DESTINATION window Refer to page 28 la In the DESTINATION window touch the To the right button lb Touch the Select on map button 47 User s manual AVIC S1 The map opens in SEARCH FOR DESTINAT
67. starts The simulation can be ended at any time 1 Press the MENU key beneath the display 2 In the DESTI NATION window tap on the To the right button 3 Touch the Cancel Route button 4 5 9 Starting navigation Overview Condition 62 a a When the GPS signal is sufficient for navigation purposes you can start route guidance Note During navigation the current position is the starting point The first stage is then the drive to the first specified waypoint Note The route calculation uses the settings that were established in the ROUTE PREFERENCES Settings window You can change the standard settings via the SETTINGS ROUTE PREFERENCES window You will find detailed information on this in chapter Route Preferences on page 86 lt gt You have planned or downloaded a route as is described in Indicating waypoints on page 56 and Download route on page 59 The route is calculated as described in Calculating the route on page 60 and is shown on the map Itinerary with waypoints Navigation User s manual AVIC S1 1 Touch the Navigate button The route is calculated to the first waypoint A window informs you of the progress of the calculation Calculate route IO 6s Hope Los Angeles 30017 California The map is shown Your current position is shown by a red triangle The route is highlighted in green Highland Creek Pky Jomi 22 mph Bells Mill Dr As soon as you arri
68. t time 1 Not doing so could cause permanent damage to the rechargeable battery 12 Power supply and charging the battery User s manual AVIC S1 2 2 Switching on the AVIC S1 As soon as you have connected the navigation system to a power Supply you can start to use the unit 1 Slide the main switch on the back of the device to ON If the main switch is already switched to ON then press the On Off button on the top of the device The PIONEER start screen appears briefly during start up At the first start the following message appears WARNING 4 navigation system is only a driving aid and not a substitute for attentive and sate driving Always observe and obey all laws and road signs even if they contradict the instructions of the navigation system Review the manual Do not operate this product while driving By pressing the OK key you accept the LICENSE AGREEMENT found on the included manual 2 Read the message and touch OK if you agree with the written warning 2 3 Basic settings Basic Settings When you start AVI C S1 for the first time you will be asked to specify the language in which you would like to operate the unit for the time zone of your current location for calculating accurate estimated time of arrival to specify the desired format for displaying time 12hr 24hr and distance km mi Using the AVIC S1 for the First Time 13 User s manual AVIC S1 Language 1 Switch on
69. ter 4 1 4 2 4 3 4 4 4 5 General information on navigation Starting AVIC S1 Entering a destination Opening the DESTINATION window Specifying destination state province Entering a destination address Specifying points of interest Destination history Address book Navigating home Selecting destinations on the map Administering destinations Saving Opening the ADDRESS BOOK Saving Editing Opening the ADRESS Book RECORD window Deleting Itinerary with waypoints Opening the ITINERARY window Indicating waypoints Scrolling through the list of waypoints Editing the list of Managing itineraries Calculating the route Displaying information regarding the route Simulating a route Starting navigation Navigation User s manual AVIC S1 page 26 page 2 7 page 28 page 49 page 55 25 User s manual AVIC S1 4 1 General information on navigation Arriving at your destination 26 Use of AVI C S1 is executed at your our risk Caution Before you use this navigation system please make sure that you have thoroughly read and understood the Important Information for the User which is to be found on the Software DVD Caution The availability of navigation data depends on the ability of the antenna to receive a GPS satellite signal A minimum of 4 GPS satellite signals is needed to determine current GPS position The signal may be unavailable if obstructed by such things as overhead roo
70. the pen or finger pressed down and move the map area to the desired direction 5 4 Showing the map during navigation During navigation the map opens in the STANDARD view For the parameters Map type Autozoom and Orientation you apply the settings that you have specified For more information refer to chapter Configuring AVIC S1 on page 83 Navigation aids Whilst navigating you will be shown different information that will be of use for the journey e gen CA 60 SOTO ST SO ei 10 9 7 16 Ari fd ee ee Ee Zomi 10 Working with the map 73 User s manual AVIC S1 Area Information 1 The distance field shows you at what distance the driving manoeuvre shown below should be carried out If you are supposed to follow a course of the road for several miles the distance field indicates how far An arrow beneath this points straight up In the large arrow field the next driving manoeuvre that is to be performed is shown schematically If you are supposed to follow a course in the road for several miles the arrow will be pointing straight up In the case of driving manoeuvres that are to be carried out quickly in succession the small arrow field Shows the next but one driving manoeuvre 4 When you are approaching the location where the next manoeuvre is to be carried out a bar is shown beneath the arrow field The closer you come to the crossroads the less of the bar is shown You will be prompted t
71. the right lower corner of the display does not show the state province in which your destination is located then touch to specify the state province refer to Specifying destination state province page 29 Enter the zip code for the destination Note The last 8 cities from the displayed state province that you have entered as destination city are listed chronologically If you want to enter one of these cities touch entry to select As soon as the zip code appears in the list above the keyboard touch to select The keyboard appears with the Street entry field 33 User s manual AVIC S1 34 a 6 Enter the destination street Note The last 8 streets from the destination city that you have entered as destination street are listed chronologically If you want to enter one of these cities touch entry to select As soon as the destination street appears in the list above the keyboard touch to select The keyboard appears with the House number entry field 8 Enter the house number As soon as the house number appears in the list above the keyboard touch to select If you do not know the house number or do not want to specify it touch the No house number button The route is calculated Once the calculation has ended and there is a sufficient GPS signal route guidance will begin Entering a destination User s manual AVIC S1 Intersection city street intersecting road
72. tion Info Waypoint Info Displayed Time Street names on map 2D GPS current position Battery Status Background Autozoom 7 10 Home Address 7 11 Phone Menu 7 12 Hardware Demo Mode Click sound Brightness Battery Status GPS Status 7 13 Regional Settings Language Time Zone Time Format Distance page 85 page 85 page 85 page 86 page 87 page 89 page 93 page 93 page 94 page 94 page 95 page 98 7 14 Product Information page 100 7 15 Restore Factory Settings page 100 Configuring AVIC S1 83 User s manual AVIC S1 7 1 Opening the SETTINGS window Opening the Avic S1 offers a number of setting possibilities with which you SETTINGS window can adapt the software to your individual requirements To display and change the current settings you always start at the SETTINGS window You can open the SETTINGS window as follows If you can see the map 1 Press the MENU key on the lower right of the display The DESTINATION tab opens 2 Tap on the Settings tab If a different window is opened 1 Press the MAP key The map opens 2 Press the MENU key The DESTINATION window opens 3 Tap on the Settings tab The SETTINGS window is now opened Destination Settings Orientation Map Type Day Night Display Route Overlay POI Preferences Touch the To the right and To the left buttons to view more setting possibilities 84 Opening the Settings window User s manual AVIC S1 7 2 Orientation
73. tries can be renamed and assigned to a different group You can also assign the entry to a different address Opening the ADRESS BOOK RECORD window 1 Open the ADDRESS BOOK refer to page 49 2 Use the Up and Down buttons or the scrolling wheel in order to scroll through the list Navigation 51 User s manual AVIC S1 3 Touch the Editing button alongside the entry that you wish to edit The ADDRESS BOOK RECORD window opens Address book record Back Locati Delete record Show on map 1 Open the ADDRESS BOOK RECORD window for the entry you wish to rename refer to page 51 2 Touch the Name button Name The SET NAME window opens Renaming 3 Tap repeatedly on the Delete character button in order to delete the old name 4 Enter the new name 5 Touch the OK button The ADDRESS BOOK RECORD window opens again Close the ADDRESS BOOK RECORD window and return to the ADDRESS BOOK The new entry appears in the list 52 Administering destinations Assigning a group Overview Navigation User s manual AVIC S1 The entries of more extensive address books can be assigned to groups These groups are labelled with icons The address book can be sorted alphabetically or even according to groups 1 Open the ADDRESS BOOK RECORD window for the entry you wish to rename refer to page 51 2 Touch the Icon button The SELECT ICON window opens KS No icon
74. ve at the first waypoint the message You have reached your destination can be heard The system then automatically calculates the route to the next waypoint and you can continue your journey without interruption 63 User s manual AVIC S1 No GPS Reception 64 If there is no GPS signal the following message appears You have the following options Wait to get into an area where there is GPS reception Once you enter this area route guidance will begin Touch Cancel The window you came from reappears Repeat your last entry later to restart navigation Touch OK The system calculates the route Therefore it assumes the last known position to be the starting point The calculation terminated the route is shown on the map with the last known position as starting point This is useful if the last Known position is not far from your current position As soon as GPS reception is sufficient for navigation purposes the system recalculates the route and displays it on the map Now navigation may begin Itinerary with waypoints 5 Working with the map Topics covered in this chapter 5 1 Status displays 5 2 Zoom 5 3 Map views Standard map view Search for destination view View destination map view 5 4 Showing the map during navigation Working with the map User s manual AVIC S1 page 66 page 68 page 69 page 3 65 User s manual AVIC S1 Overview The map can be displayed in diff
75. verview You can save destinations to which you drive frequently in the ADDRESS BOOK They are named here and can be assigned to a group Address book entries can be renamed deleted and assigned to other groups You can also assign the entry to a different address You can view the assigned address on the map All the actions start from the ADDRESS BOOK window 4 4 1 Opening the ADDRESS BOOK Opening the ADDRESS BOOK Navigation The administration of the entries in the address book always starts in the ADDRESS BOOK window You can open the ADDRESS BOOK in the following way If the map is visible 1 Press directly on the center of the scrolling wheel below the display If the DESTINATION window is open 1 Touch the Address Book button If a different window is open 1 Press the MAP key The map opens 2 Press directly on the centre of the scrolling wheel below the display The ADDRESS BOOK is now open 49 User s manual AVIC S1 4 4 2 Saving 1 Open the ADDRESS BOOK Refer to page 49 Address Book m PAUL 2 Touch the Add button 3 Enter a destination refer to chapter Entering a destination page 28 As soon as you have entered a destination the SET NAME window appears 4 Specify a name for the new entry 5 Touch the OK button 50 Administering destinations User s manual AVIC S1 The ADDRESS BOOK window opens 4 4 3 Editing Overview Address book en
76. ware s user interface Also used for highlighting warnings and notices Registered names and trademarks Window and dialog box titles Symbols The following symbols refer to specific content of text Symbol V A Use Information and tips that facilitate working with AVIC S1 More detailed information and explanations Warnings About this manual 1 1 4 Terminology Terms Used Introduction User s manual AVIC S1 Specific terminology is used in this manual to designate elements of the product and user actions Term Display Window Tab Dialogue window Button Symbol Input field Highlight Scrolling wheel Hard Key Activate Select Use The physical display of the navigation device A functional software operating unit that occupies the entire display The navigation software is mainly operated by means of two tabs the DESTINATION tab and the SETTINGS tab Tap the appropriate tab in order to open the respective window A dialog window Is a popup message which includes questions or information text and usually has a OK or Cancel button that need to be pressed to continue operation Elements of the user interface that can be touched to trigger a software action Buttons can be labelled and or provided with a graphic Small graphics on the user interface These represent information An example of this is the symbol for GPS reception No operation associated with a symbo
77. wing hardware keys are located on the front of the unit Use these for quick access to important functions Position on map Opens the map in standard view and displays your current location Toggles between 2D and 3D view when your current position is being displayed i e when GPS signals are being received Scrolling wheel Your device has a wheel that can be turned up and down and also pressed Ina list Turn the wheel upwards downwards and the previous following entry in the list is selected Press the center of the wheel to choose the selected entry In map view Turn the wheel upwards to increase the volume of route guidance Turn the wheel downwards to reduce the volume of route guidance Press the center of the wheel to open the ADDRESS BOOK Press briefly when you are on the map screen Opens the DESTINATION window Press briefly when you are on the map screen Opens the map at the same point at which it was closed Long push Brings up the Bluetooth handsfree application Briefly press in the telephone application Switches back to the navigation software The button to switch the device on and off is located on the top of the device Switch on off button Long push Switches the device on oft Hardware keys User s manual AVIC S1 3 2 Software keyboard Overview If text entries are necessary a touch screen keyboard appears in the lower area of the screen 3 2 1 Enter characters w

Download Pdf Manuals

Related Search

Related Contents

Grating Electromagnetic Theory User Guide    USER`S MANUAL - Mr Handsfree  Request for Bid Runway Sweeper  P 31A P 35  Grime Buster Multi-Surface Cleaner & Degreaser  Guide d`utilisation  Manual do utilizador do computador portátil  HAM-8500(K)  STM small remedy 13"  

Copyright © All rights reserved. Failed to retrieve file