Bedienungsanleitung de Operating instructions en Mode d
Contents
1. 12 in away from any metal objects and away from the sur face on which you are working before Switching it on again Keep the tool away from sources of electromagnetic interference Observe the operating temperature range technical data Activate the desired detection mode 9 Disposal EO Most of the materials from which Hilti tools or appliances are manufactured can be recycled The materials must be correctly separated before they can be recycled In many countries Hilti has already made arrangements for taking back old tools or appliances for recycling Ask Hilti Customer Service or your Hilti representative for further information 22 For EC countries only Do not dispose of electronic measuring tools or appliances together with household waste In observance of the European Directive on waste electrical and electronic equipment and its imple mentation in accordance with national law electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility 10 Manufacturer s warranty Hilti warrants that the tool supplied is free of defects in material and workmanship This warranty is valid so long as the tool is operated and handled correctly cleaned and serviced properly and in accordance with the Hilti Operating Instructions and the technical system is main tained This means that only original Hilti consumables compo2. Basic information concerning safety a Do not render safety devices ineffective and do not remove information and warning notices b Keep children away from the tool c Check that the tool functions correctly each time before use d Checkthe display after switching the tool on The display should show the Hilti logo the tool model designation and version The tool then carries out a brief self test after which the standard settings or the previously saved settings are displayed e Check to ensure that the tool is able to calibrate itself after switching on f Operation of the tool in the proximity of pregnant women is not permissible 9g Rapidly changing detection conditions may lead to inaccurate readings h Use the tool only within the specified conditions Do not use the tool on materials containing items such as tensioning cables or stainless steel ob jects i Do not use the tool in the proximity of medical instruments and appliances j Donot drill at positions where the tool has located an object k The warnings shown in the display must always be observed Donotuse the tool for quality control inspections m Do not use the tool in the proximity of sources of electromagnetic interference e g electric break ers in operation n Take the influences of the surrounding area into account Do not use the tool where there is a risk of fire or explosion O Use of the tool in the proximity of persons with a ca
3. all m mds PS 35 Bedienungsanleitung Operating instructions Mode d emploi Istruzioni d uso Manual de instrucciones Manual de instru es Gebruiksaanwijzing Brugsanvisning Bruksanvisning Bruksanvisning Kayttoohje xanosuc Hasznalati utasitas Instrukeja obstugi N vod k obsluze N vod na obsluhu Upute za uporabu Navodila za uporabo Instructiuni de utilizare Kulllanma Talimati Lieto anas pam c ba Instrukcija Kasutusjuhend lt zz nx i 7 m 3 Printed 07 07 2013 Doc Nr 5137782 000 00 ORIGINAL OPERATING INSTRUCTIONS PS 35 ferrodetector It is essential that the operating instructions are read before the tool is operated for the first time Always keep these operating instructions to gether with the tool Ensure that the operating instructions are with the tool when it is given to other persons Contents Page 1 General information 13 2 Description 14 3 Technical data 17 4 Safety instructions 18 5 Before use 19 6 Operation 19 7 Care and maintenance 21 8 Troubleshooting 22 9 D
4. mechanical stress 4 6 Transport Always remove the batteries before shipping the tool 5 1 Inserting the batteries El CAUTION Do not use damaged batteries CAUTION Always replace the complete set of batteries DANGER Do not mix old and new batteries Do not mix batteries of different makes or types T 2 Open the battery compartment Remove the batteries from the packaging and insert them in the tool NOTE Take care to observe correct polarity see symbols in battery compartment Check to ensure that the battery compartment cover is closed correctly 5 2 Checking the tool 1 Check to ensure that the sensor area is not damp If necessary use a cloth to dry the sensor area 2 For accurate results allow the tool to acclimatize itself to the ambient conditions before use if it has previously been exposed to extreme temperature fluctuations Check how the tool is set before using it 5 3 Switching the tool on off 1 Switch the tool on by pressing the on off button After switching the tool on the standard settings are active When the tool is already switched on press the on off button the tool switches itself off NOTE If the tool is not used or an error message is displayed it switches itself off automatically after five minutes The tool switches itself off when the batteries are discharged 5 4 Settings menu 1 2 3 Switch the tool on Press one of the arrow buttons righ
5. year is recommended The calibration service provides confirmation that the tool is in conformance on the day it is tested with the specifications given in the operating instructions The tool will be readjusted if deviations from the man ufacturer s specification are found After checking and adjustment a calibration sticker applied to the tool and a calibration certificate provide written verification that the tool operates in accordance with the manufacturer s Specification Calibration certificates are always required by companies certified according to ISO 900x Your local Hilti Center or representative will be pleased to provide further information 8 Troubleshooting Fault The tool can t be switched on Possible cause The battery is inserted the wrong way The battery is exhausted Remedy Replace the battery Insert the battery correctly round incorrect polarity The battery compartment is not closed The tool can t calibrate itself gt The tool displays an electro magnetic interference warning netic interference gt The tool displays a temperature warning low eL No indication when positioned over an object is not active The tool is too close to metal objects The tool is too close to electromag The temperature is too high or too The ferrous non ferrous metal mode Close the battery compartment Switch the tool off and then hold it at least 30 cm
6. Schaan W 3655 0313 10 Pos 1 1 Printed in Germany 2013 Right of technical and programme changes reserved S E amp O 404400
7. ct with the surface to be scanned Do not move the tool at a speed greater than 20 cm s 9 in s 6 2 1 Sweep scan method In order to achieve best results the tool should be used with a sweeping motion extended horizontal and vertical movements over the object The series of illustrations show the sweep method in use When the tool is switched on for the first time it displays an animated training program that shows how the tool should be used to scan a surface 6 3 Locating objects in standard mode mm inch 20 Switch the tool on and hold it at least 30 cm 12 in away from any metal objects and away from the surface on which you are working The tool activates standard mode after completing automatic calibration The depth measurement units mm or in are shown in the display and the status LEDs light green The tool is ready to be used for locating objects Carefully bring the tool into contact with the surface to be scanned and then begin to move it sideways NOTE Deactivate the limited depth scan setting if you wish to detect ferrous metal without depth limitation When the tool approaches a ferrous metal object a rebar the ferrous metal symbol begins to blink the status LEDs light red and the amplitude of the signal strength indicator rises and reaches its max imum when the tool is positioned over the center of the object In the meantime the depth measurement is shown in the d
8. e from the surroundings Calibration warning gt Calibration is required 2 11 Battery condition indicator Number of segments shown Charge status in 3 100 capacity 2 80 capacity 1 50 96 capacity 0 20 96 capacity Battery symbol blinks fully discharged 2 12 Items supplied as standard Tool Hand strap Batteries Operating instructions Manufacturer s certificate Soft pouch BP a Markers 3 Technical data Right of technical changes reserved NOTE All values apply to individual rod like metal objects positioned at right angles to the direction of movement of the detector and when the surface of the concrete is flat and smooth with no external interference factors Detection range and accuracy is reduced when measurements are taken on brickwork PS 35 Detection range for locating ferrous metals in concrete gt 8 mm 3 5 120 mm in 4 individual rebars 6 8 mm 5 100 mm 4 in Detection range for locating non ferrous metals copper Diameter Min 10 mm 7 in Wall thickness Min 2 mm and aluminium pipes 2 in 5 80 mm 74 in 31 s in Depth measurement range for individual rebars gt 8 mm 2 3 5 120 mm 4 4 in 6 8 mm 5 100 mm 74 4 in Accuracy of depth measurement accurate measure Depth range 5 60 mm 22 s in 3 mm s in ment mode Dept
9. e that may cause undesired operation NOTE Changes or modifications not expressly approved by Hilti could void the user s authority to operate the equipment PS 35 01 Hilti trademark of Hilti Corp Schaan LI Made in Malaysia This device complies with part 15 of the Rules Operation subject to he condition thal hs device dose ol ease interterence This Case digtal apparatus compe win Canadian ICES 009 Cet apparel num rique dalla classe BL e FE CE Power 6V 160 mA Serialnumber Item No _ 3 23 12 EC declaration of conformity original Designation Ferrodetector Type PS 35 Year of design 2009 We declare on our sole responsibility that this product complies with the following directives and standards 2011 65 EU 2006 95 EC 2004 108 EC EN ISO 12100 Hilti Corporation Feldkircherstrasse 100 FL 9494 Schaan JL mE Paolo Luccini Head of BA Quality and Process Man agement Business Area Electric Tools amp Ac cessories 01 2012 hka plas Matthias Gillner Executive Vice President Business Area Electric Tools amp Accessories 01 2012 Technical documentation filed at Hilti Entwicklungsgesellschaft mbH Zulassung Elektrowerkzeuge Hiltistrasse 6 86916 Kaufering Deutschland iL Ti Hilti Corporation LI 9494 Schaan Tel 4423 23421 11 Fax 423 234 29 65 www hilti com Hilti registered trademark of Hilti Corp
10. e tool is positioned over the center of the rebar If the tool is moved further until it is past the rebar the status LEDs light green and the signal strength indicator shows a decreasing value To obtain an exact indic ation of the position of the rebar the tool must be moved back in the opposite direction until the status LEDs again light red and the signal strength indicator shows the maximum value When the tool is in the area where maximum signal strength is indicated the initial depth measurement is displayed 3 Atthis point press the scan button and the precise depth measurement will then be displayed within two to three seconds 6 7 Limited depth scan NOTE This measurement mode allows rebars to be located within a specified depth range NOTE When using the tool in this mode the preset depth must take a clearance distance from the rebar into account Switch the tool on In the settings menu select ferrous metals and set the desired depth scan range in which you wish to locate the rebars If necessary you can deactivate the non ferrous metals localization function Press the scan button to select the desired max imum depth range 25 50 or 75 mm 1 2 or 3 in 4 Use the tool as described in the section Detecting objects in standard mode for ferrous metals In this scanning mode only objects located at a depth less than the preset measuring depth will be detected The last setting is memoriz
11. ed by the tool m 7 Care and maintenance 7 1 Cleaning and drying Use only a clean soft cloth for cleaning If necessary moisten the cloth slightly with pure alcohol or a little water NOTE Do not use any other liquids as these may damage the plastic components 2 Thetemperature limits for storage of your equipment must be observed especially in winter summer 7 2 Storage Remove the tool from its case if it has become wet The tool its carrying case and accessories should be cleaned and dried at maximum 40 C 104 F Repack the equipment only once it is completely dry Check the accuracy of the equipment before it is used after a long period of storage or transportation Remove the batteries from the tool before storing it for a long period Leaking batteries may damage the tool 7 3 Transport Use the Hilti toolbox or packaging of equivalent quality for transporting or shipping your equipment Make sure that the tool is held securely in place inside the Hilti toolbox 21 or equivalent packaging during transport Store the tool safely CAUTION Always remove the batteries before shipping the tool 7 4 Hilti calibration service We recommend that the tool is checked by the Hilti cal ibration service at regular intervals in order to verify its reliability in accordance with standards and legal require ments Use can be made of the Hilti calibration service at any time but checking at least once a
12. en making an enquiry to your Hilti representative The type designation and serial number can be found on Or service department the type identification plate on the tool Make a note of this data in your operating instructions and always refer Type Serial no 2 Description 2 1 Use of the product as directed The Hilti PS 35 Ferrodetector is designed to detect ferrous metals steel rebars non ferrous metals copper and aluminium and to measure the depth of concrete cover The tool is not suitable for locating the position of tensioning cables The tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not as directed Observe the information printed in the operating instructions concerning operation care and maintenance Take the influences of the surrounding area into account Do not use the tool or appliance where there is a risk of fire or explosion Modification of the tool is not permissible 2 2 Display The measurements settings and tool status are shown in the display 2 3 Display illumination The display illumination switches on automatically in conditions of low ambient light 2 4 Display Areas of the display n f4 JE D La Status area D 2 Detection area mm Shows the two areas of the display 2 5 Standard settings in the status area Standard status area The standard detection mode is set automatically when the tool
13. h range 60 80 mm 22 31 5 mm in Depth range 80 100 mm 4 7 mm 9 2 in Depth range 100 120 mm 4 43 4 11 mm 7 6 in Localization accuracy 10 mm 7 in Minimum distance between objects Depth range 5 55 mm in 21 s 55 mm 21 in Depth range gt 55 mm 21 in Distance depth factor 21 5 Power source 4x1 5V AAA LROS alkaline batteries Battery life at 20 C 8h Operating temperature range 15 50 C 5 F 122 F Automatic cut out 5 min Storage temperature range dry 25 63 13 145 F Relative air humidity 95 Protection class IP 54 protection against dust and water spray Weight including batteries 450 g 1 Ib Dimensions L x W x H 237 mm x 104 mm x 47 mm 9 4 in x 4 in x 2 in NOTE Applies to concrete with typical aggregate and reinforcement content Measuring units Dimensions mm Millimeters In Inches in Ve fraction 17 4 Safety instructions In addition to the information relevant to safety given in each of the sections of these operating instructions the following points must be strictly observed at all times The tool is designed to detect ferrous metals steel re bars and non ferrous metals copper and aluminium in concrete brick drywall and under plaster surfaces in accordance with the information provided in the technical data section 4 1
14. is switched on In this mode ferrous metals and non ferrous metals f f x N copper and aluminium can be detected Limited depth scan is switched off 2 6 Status indicator Status area Ferrous metal detection is act Tolls ie Non ferrous metal detection is active Limited depth scan is active Selected depth measurement range in mm or inches Battery status 90 Shows which status is active 2 7 Detection zone Detection display Signal strength indicator Depth measurement in mm or m m inches Shows the area in the detection zone 2 8 Menus Menus Status area shows the current menu settings Status 0 is Off and l is On The symbol on the white back ground is active Display shown when navigating through the menus 2 9 Symbols in the display Ferrous metal active left inactive right active left inactive right inches active left mm active right active left inactive right active left inactive right 15 Audible signal active left inactive right active left inactive right 2 10 Warnings and error symbols in the display Error message Contact Hilti service Temperature warning Inadmissible operating range Electromagnetic interference Too much interferenc
15. isplay If the tool is moved further until it is past the ferrous metal the status LEDs light green and the signal strength indicator shows a decreasing value To obtain an exact indication of the position of the object the tool must be moved back in the opposite direction until the status LEDs light red and the signal strength indicator shows the maximum value Use the marking pen supplied to mark the position of the ferrous metal object through the marking opening in the tool If the loudspeaker has been activated a constant audible signal is emitted so long as the tool is positioned over the ferrous metal object When the tool approaches a non ferrous metal ob ject copper aluminium the non ferrous metal symbol begins to blink the status LEDs light red and the amplitude of the signal strength indicator rises and reaches its maximum when the tool is positioned over the center of the object If the tool is moved further until it is past the non ferrous metal object the status LEDs light green and the signal strength indicator shows a decreasing value To obtain an exact indication of the position of the object the tool must be moved back in the opposite direction until the status LEDs again light red and the signal strength indicator shows the maximum value Use the marking pen supplied to mark the position of the non ferrous metal object through the marking opening in the tool If the loudspeaker has been activated a c
16. isposal 22 10 Manufacturer s warranty 23 11 FCC statement applicable in US ICES statement applicable in Canada 23 12 EC declaration of conformity original 24 1 General information 1 1 Safety notices and their meaning DANGER Draws attention to imminent danger that will lead to serious bodily injury or fatality WARNING Draws attention to a potentially dangerous situation that could lead to serious personal injury or fatality CAUTION Draws attention to a potentially dangerous situation that could lead to slight personal injury or damage to the equipment or other property NOTE Draws attention to an instruction or other useful informa tion El These numbers refer to the corresponding illustra tions The illustrations can be found on the fold out cover pages Keep these pages open while studying the oper ating instructions In these operating instructions the designation the tool always refers to the PS 35 Ferrodetector Parts operating controls and indicators Kll D On off button settings button Arrow buttons for navigating menus 4 Status LEDs red green 5 Marking opening 8 Display 7 Battery compartment 1 2 Explanation of the pictograms and other information Warning signs General warning Symbols LAY e Read the Return waste operating material for instructions recycling before use 13 Location of identification data on the tool to it wh
17. nents and spare parts may be used in the tool This warranty provides the free of charge repair or re placement of defective parts only over the entire lifespan of the tool Parts requiring repair or replacement as a result of normal wear and tear are not covered by this warranty Additional claims are excluded unless stringent na tional rules prohibit such exclusion In particular Hilti is not obligated for direct indirect incidental or con sequential damages losses or expenses in connec tion with or by reason of the use of or inability to use the tool for any purpose Implied warranties of merchantability or fitness for a particular purpose are specifically excluded For repair or replacement send the tool or related parts immediately upon discovery of the defect to the address of the local Hilti marketing organization provided This constitutes Hilti s entire obligation with regard to warranty and supersedes all prior or contemporaneous comments and oral or written agreements concerning warranties 11 FCC statement applicable in US ICES statement applicable in Canada This device complies with section 15 of the FCC stand ards and fulfills the IC requirements in accordance with ICES 008 for class B Operation is subject to the following two conditions 1 This device may not cause interference not in compli ance with the standards 2 This device must accept any interference received in cluding interferenc
18. onstant audible signal is emitted so long as the tool is positioned over the non ferrous metal object 6 4 Locating objects consisting solely of ferrous metal Switch the tool on Activate the ferrous metals detection mode in the menus and deactivate the non ferrous metals de tection mode The limited depth scan mode may be activated if desired Then follow the steps described in the section Loc ating objects in standard mode for ferrous metals 6 5 Locating objects consisting solely of non ferrous metal 1 Switch the tool on Activate the non ferrous metal detection mode in the menus and deactivate the ferrous metal detection mode The limited depth scan mode is deactivated auto matically 2 Follow the steps described in the section Locating objects in standard mode for non ferrous metal 6 6 Precise rebar depth measurement NOTE The precise depth measurement mode can be used only with reinforcing bars in concrete inch 07 Switch tool Activate the ferrous metals detection mode the menus and deactivate the non ferrous metals de tection mode a 2 Carefully bring the tool into contact with the surface to be scanned and then begin to move it slowly sideways When the tool approaches a rebar the ferrous metal symbol begins to blink the status LEDs light red and the amplitude of the signal strength indic ator rises and reaches maximum when th
19. rdiac pacemaker is not permissible p Make sure that the display area can be easily read e g do not touch the display area with the fingers keep the display area clean q Do not use the tool if it is defective r Always keep the detection area clean S Always check how the tool is set before using it t The accuracy of the tool is influenced by the base material If the tool is unable to calibrate itself cor rectly small measurement errors may result u When the tool is unable to calibrate itself automatic ally a warning appears in the display 4 2 Proper organization of the workplace a Avoid unfavorable body positions when working on ladders or scaffolding Make sure you work from a safe stance and stay in balance at all times b Whenthe tool is brought into a warm environment from very cold conditions or vice versa allow it to become acclimatized before use c Usethe tool only within its specified limits d Observe the accident prevention regulations ap plicable in your country 4 3 Electromagnetic compatibility Although the tool complies with the strict requirements of the applicable directives Hilti cannot entirely rule out the possibility of the tool being subject to interference caused by powerful electromagnetic radiation leading to incor rect operation Check the accuracy of the tool by taking measurements by other means when working under such conditions or if you are unsure Likewise Hilti canno
20. t or left to go to the settings menu Press one of the arrow buttons to move through the menu and make your selection Press the scan and settings button to change the settings After making your selection the tool will automatic ally return to the area display within 5 seconds and is then ready for operation NOTE If no selection is made within 5 seconds the tool leaves the settings menu automatically 6 Operation 6 1 Preparing the tool for use CAUTION Always drill at a safe distance from objects you have detected 1 Before switching the tool on check that it is not in contact with anything and is clear of the working surface or metal objects 2 3 Switch the tool on by pressing the on off button After carrying out a brief self test the tool begins to calibrate itself automatically The status LEDs light green as soon as this has been completed While the tool is calibrating itself hold it in the air at least 30 cm 12 in away from any metal objects and away from the surface on which you are working The first five times the tool is switched on it runs through an animated training program that demon strates how it should be used This training program can be switched off in the options in the settings menus 19 6 2 Working with the tool Check that the tool makes full contact with the surface you wish to scan Use the tool only on smooth surfaces Bring the tool slowly and carefully into conta
21. t rule out the possibility of interference with other devices e g aircraft navigation equipment The tool complies with the requirements of class A The possibility of interference occurring in a domestic environment cannot be excluded 4 4 General safety instructions a Check the condition of the tool before use If the tool is found to be damaged have it repaired at a Hilti service center b The user must check the accuracy of the tool after it has been dropped or subjected to other mechanical stresses c Although the tool is designed for the harsh con ditions of jobsite use as with other measuring instruments it should be treated with care d Although the tool is protected to prevent entry of dampness it should be wiped dry each time before being put away in its transport container e Check to ensure that all symbols are visible when the tool is switched on f Check the accuracy of the tool before using it for detection or measurement 4 5 Electrical safety a Keep the batteries out of reach of children b Do not allow the batteries to overheat and do not expose them to fire The batteries may explode or release toxic substances c Do not charge the batteries d Do not solder the batteries into the tool e Donotdischarge the batteries by short circuiting This may cause them to overheat and present a risk of personal injury burns f Do not attempt to open the batteries and do not subject them to excessive
Download Pdf Manuals
Related Search