MORE™ User Guide: Mylex Online RAID Expansion™
Contents
1. Figure 2 1 Select View Update Configuration The View Update Configuration menu is displayed Figure 2 2 MYLEX Disk Array Controller Configuration Utility Version 4 4n mm dd yy n Channel mn Target DACI6BXX in Firmware version 3 5n View Update Configuration 1 Define Pack 2 Define System Drive B Add Drive to Last Pack Choose this option to add drive s to the last pack in order to add capacity to the existing configuration Use Cursor keys for selection hit lt ENTER gt to select lt ESC gt to Exit Figure 2 2 View Update Configuration Menu Select Add Drive to Last Pack 2 2 MORE User Reference Guide Using MORE with DACCF 4 4 2 Select Add Drive to Last Pack from the View Update Configuration menu Figure 2 2 to request the capacity expansion process If any of the following conditions are true about the last created pack the pack with the highest letter value in the list MORE will not be able to add capacity to the pack e The pack consists of a single JBOD drive e The pack already has eight 8 drives e The pack is a spanned pack e A total of 32 system drives have already been configured The Add Capacity screen is displayed Figure 2 3 MYLEX Disk Array Controller Configuration Utility Version 4 4n mm dd yy n Channel mn Target DACI6BXX itn Firmware version 3 5n Add Capacity Tgt Channel Number ID2. Do you want to proceed Figure 3 4 Expand Capacity Confirmation Message 3 Click Yes to begin the capacity expansion process on the target RAID group or click No to cancel the capacity expansion process Caution Once the Auto Expand Capacity process has started it cannot be interrupted by user intervention You must allow the process to reach completion 4 If you chose to proceed with expansion the Expand Capacity Status screen appears showing the progress of restriping across the target RAID group You may leave the status screen visible throughout the process or you may click Close to hide it and continue using Global Array Manager In either case the expansion process continues to completion Should you wish to view the status screen again after having previously closed it select Administration Expand Capacity Status 3 4 MORE User Reference Guide Using MORE with Global Array Manager 2 05 Expand Capacity The Expand Capacity function provides user control over the following e The number of unconfigured drives that will be added to the selected RAID group The RAID group that will be selected for expansion e The RAID level and write policy of each new logical drive to be created e Whether to initialize the logical drive automatically after the configuration change has been accepted As discussed elsewhere in this document there are restrictions which the user may not violate when at
3. e How to expand capacity using MORE in DACCF Utilities 4 4 e How to expand capacity using MORE in Global Array Manager 2 05 Refer to the Global Array Manager 2 Installation Guide and User Manual Mylex Part Number 771961 and or the DACCF Utilities Installation Guide and User Manual Mylex Part Number 771953 for all other information on these products Contents Chapter 1 Introduction to MORE Overview A A Soe eS How MORE is Implemented 00 00 0000 cee eee eee eee Operating Characteristics of MORE 0000 cece eee eee DAC960 Functions with MORE 0 0 000 020 000005 Requite MES one nee eye LN vee he See Beg dee eh a te pd pa Chapter 2 Using MORE with DACCF 4 4 OVENIOW A Son eee a es Installing DACCF 4 4 0 eee eee Adding Capacity Under DACCF 4 4 0 0 000000 eee eee PrOCOQUIO e circense beret Pied eee Chapter 3 Using MORE with Global Array Manager 2 05 OVENVIOW rotra a aaa od OA an e a oats Ta Pe ag as A Installing Global Array Manager 2 05 ooccocccccccccco e eee eee Adding Capacity Under GAM 2 05 0 00 0 eee eee Auto Expand Capacity 0 002 Expand Capacity e i E eee eee Chapter 1 Introduction to MORE Overview Mylex Online RAID Expansion MORE is a process for adding storage capacity to an existing RAID configuration without having to take the server offline MORE either reallocates one or seve
4. or services in your jurisdiction Requests for technical information about Mylex Corporation products should be made to your Mylex authorized reseller or Mylex marketing representative Mylex is a registered trademark of Mylex Corporation Global Array Manager RAID Assist DAC960 DACCF and MORE are trademarks of Mylex Corporation Microsoft and MS DOS are registered trademarks of Microsoft Corporation Windows Windows 95 and Windows NT are trademarks of Microsoft Corporation SCO and UnixWare are registered trademarks of The Santa Cruz Operation Ltd Novell and NetWare are registered trademarks of Novell Inc Unless otherwise noted companies names and data used in examples herein are fictitious About This Manual This installation guide covers enhancements to both the Global Array Manager and DACCF Utilities software that implement Mylex Online RAID Expansion MORE technology Global Array Manager 2 05 is a maintenance upgrade for Global Array Manager 2 0 You must have an existing installation of Global Array Manager 2 0 in order to successfully install this maintenance upgrade DACCF Utilities 4 4 fully replaces DACCF Utilities 4 2 DACCF Utilities 4 2 is not required for installation of DACCF Utilities 4 4 This document will cover only information that is unique to the software upgrades described herein Specifically e General information about Mylex Online RAID Expansion technology e Requirements for using MORE
5. 8 1 Figure 2 3 Add Capacity Screen 3 Use the arrow keys to position the highlighted bar on a disk device identified as RDY ready available or SBY standby hot spare 4 Press the Enter key to include it in the expansion process When a disk is selected for inclusion in the last pack the identifier of the last pack A B C and disk index of the new drive 0 1 2 are assigned and the disk status changes to ONL 5 Repeat the previous two steps for other drives that you want to add to the last pack if any Manual No 771968 2 3 Using MORE with DACCF 4 4 One or both of the following conditions may prevent DACCF 4 4 from allowing you to select a particular disk device e The drive capacity is too small to be used in the pack e The pack already has eight 8 drives which may include disk device selections you just made 6 If necessary press the ESC key when you have finished your selection The restriping process is ready to begin and a warning message appears Figure 2 4 MYLEX Disk Array Controller Configuration Utility Version 4 4n mm dd yy n Channel mn Target DACI6BXX in Firmware version 3 5n Add Capacity Tgt Channel Number ID 8 Irreversible process Do you want to proceed EE YES Press F2 to View full Display Choose YES to proceed with data migration NO to cancel operation Figure 2 4 Add Capacity Warning Message e Select YES to begin the capa
6. MYLEX MORE User Guide Mylex Online RAID Expansion Enhancement for DACCF Utilities 4 4 and Global Array Manager 2 05 Part Number 771968 D01 Copyright 1996 Mylex Corporation All Rights Reserved All contents of this manual are copyrighted by Mylex Corporation The information contained herein is the exclusive property of Mylex Corporation and shall not be copied transferred photocopied translated on paper film electronic media or computer readable form or otherwise reproduced in any way without the express written permission of Mylex Corporation Notice This Manual describes Mylex Online RAID Expansion MORE technology as implemented in Global Array Manager 2 05 and DACCF Utilities 4 4 Although reasonable efforts have been made to assure the accuracy of the information contained herein this publication could include technical inaccuracies or typographical errors Mylex Corporation expressly disclaims liability for any error in this information and for damages whether direct indirect special exemplary consequential or otherwise that may result from such error including but not limited to loss of profits resulting from the use or misuse of the manual or information contained therein even if Mylex Corporation has been advised of the possibility of such damages Any questions or comments regarding this document or its contents should be addressed to Mylex Corporation at the address shown on the cover
7. The following paragraph does not apply to the United Kingdom or any country where such provisions are inconsistent with local law MYLEX CORPORATION PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE Some states do not allow disclaimer of express or implied warranties or the limitation or exclusion of liability for indirect special exemplary incidental or consequential damages in certain transactions therefore this statement may not apply to you Also you may have other rights which vary from jurisdiction to jurisdiction Information in this publication is subject to change without notice and does not represent a commitment on the part of Mylex Corporation Changes may be made periodically to the information herein these changes will be incorporated in new editions of the publication Mylex Corporation reserves the right to make improvements and or changes at any time in the product s and or program s described in this publication It is possible that this publication may contain reference to or information about Mylex Corporation products machines and programs programming or services that are not announced in your country Such references or information must not be construed to mean that Mylex Corporation intends to announce provide or make available such Mylex products programming
8. as quickly and as safely as possible the controller can give priority to the expansion process over all other 1 O requests Priority is set with Rebuild Rate in the Controller Options dialog box Rebuilds Consistency Checks and configuration changes are prohibited until expansion has completed T O activity continues at a lower rate while expansion is underway When capacity is added to an existing drive group MORE carries out the following mapping Table 1 1 RAID Level Mappings using MORE Original RAID Level RAID Level After Restriping RAID 0 RAID 0 RAID 1 RAID 0 1 RAID 5 RAID 5 RAID 0 1 RAID 0 1 Note RAID parameters such as cache line size and write policy are preserved throughout the expansion process Since expansion requires some time to complete the necessary restriping depending on the size of the original RAID drive group the system administrator may carry out this function without being present at the server The expansion process can be initiated from a remote location If a drive fails during the expansion process the controller will complete the restriping before rebuilding the failed drive This does NOT occur for RAID 0 Under RAID 0 the expansion process will stop in the event of drive failure The system s data is protected against power failure If power to the server or to the storage system is lost during expansion restriping will resume at the point of interruption after
9. city expansion process on the target pack e Select NO to cancel the capacity expansion process and return to the previous menu Caution Once the Add Drive to Last Pack process has started it cannot be interrupted by user intervention You must allow the process to reach completion 2 4 MORE User Reference Guide Using MORE with DACCF 4 4 7 If you chose to proceed with expansion the Add Capacity status screen Figure 2 5 appears showing the progress of data migration restriping across the target pack MYLEX Disk Array Controller Configuration Utility Version 4 4n mm dd yy n Channel mn Target DACI6BXX in Firmware version 3 5n Add Capacity Tgt Channel Number ID 8 1 SS System Drive 23 Press FZ to View full Data migration in progress Figure 2 5 Data Migration in Progress 8 Atthe conclusion of the data migration a message indicating successful completion will be displayed Press any key to return to the View Update Configuration menu Figure 2 6 MYLEX Disk Array Controller Configuration Utility Version 4 4n mm dd yy n Channel mm Target DACI6BXX in Firmware version 3 5n View Update Configuration 1 Define Pack Z Define System Drive 3 Add Drive to Last Pack Choose this option to view existing System drive s and edit their write policy OR create additional System drive s Use Cu
10. cking on it and holding down the mouse button Then drag this drive icon to an empty slot in Drive Group A Figure 3 7 Expand Capacity Drive Groups Logical Drives Drive Groups MB Logical Drives MB AH 7 J TT a Ungrouped Drives MB 516 14 Apply Figure 3 7 One Drive Selected to Expand Drive Group A 3 6 MORE User Reference Guide Using MORE with Global Array Manager 2 05 3 Now that you ve selected the drive to add click the Logical Drives tab if you wish to configure the new logical drive The Logical Drives screen appears Figure 3 8 Expand Capacity Drive Groups Logical Drives Drive Logical RAID Capacity MB Capacity Write Init Stripe Cache No Drives Level Logical Physical Utilization Cache Drive Size Size Apply Cancel Figure 3 8 Configure RAID Level of the New Logical Drive 4 Inthe RAID Level box for the new logical drive select RAID 6 Mylex equivalent of RAID 0 1 You may toggle Write Policy checked Write Back unchecked Write Through and whether to initialize the drive automatically by use of the appropriate check boxes 5 Click Add Drive to accept the new logical drive configuration The logical drive is added as Logical Drive 2 in the list Figure 3 9 Expand Capacity Drive Groups Logical Drives Drive Logical RAID Capacity MB Capacity Write Init Str
11. ipe Cache No Drives Level Logical Physical Utilization Cache Drive Size Size New Peset E E p E A 64k be i 0 FE AIDS v 16 f E Vv is 64k gt 64 y Mol ll Pee OF fe bed 2 fae Po fe fe oe oe fe KI Delete Drive Apply Cancel Figure 3 9 New Logical Drive Added to the RAID Group Manual No 771968 3 7 Using MORE with Global Array Manager 2 05 6 Click Apply to accept the expand capacity configuration shown The restriping process is ready to begin and a confirmation message appears Figure 3 10 Expand Capacity 2 Expand Capacity is not a reversible operation Do you want to proceed Figure 3 10 Expand Capacity Confirmation Message 7 Click Yes to begin the capacity expansion process on the target RAID group or click No to cancel the capacity expansion process Caution Once the Expand Capacity process has started it cannot be interrupted by user intervention You must allow the process to reach completion 8 If you chose to proceed with expansion the Expand Capacity Status screen appears showing the progress of restriping across the target RAID group You may leave the status screen visible throughout the process or you may click Close to hide it and continue using Global Array Manager In either case the expansion process continues to completion Should you wish to view the status screen again after having previously closed it select Administration Expand Capaci
12. lly Installation instructions will not be repeated in this document Refer to the documentation that accompanied GAM 2 0 Global Array Manager 2 Installation Guide and User Manual Mylex Part Number 771961 for detailed installation instructions Manual No 771968 3 1 Using MORE with Global Array Manager 2 05 Adding Capacity Under GAM 2 05 MORE is implemented as two additional options on the Administration menu Auto Expand Capacity and Expand Capacity Figure 3 1 Window Help Sign On Define Server Groups Raid Assist Advanced Configuration Auto Expand Capacity Expand Capacity Controller Options Scan Devices Initialize Status Rebuild Status Consistency Check Status Expand Capacity Status Alarm Setup Communication Settings User Preferences Figure 3 1 Available MORE Functions Auto Expand Capacity The Auto Expand Capacity function is an automated process with the following characteristics e All available unconfigured drives will be added to the first existing drive group that qualifies for expanded capacity as long as the total number of drives will not exceed eight 8 e Hot spare standby drives are not auto selected Hot spare status must first be removed before a drive can be added to an existing group 1 A drive group at RAID 0 1 5 or 0 1 with fewer drives than any other drive group and in no case exceeding seven 7 existi
13. ng drives 3 2 MORE User Reference Guide Using MORE with Global Array Manager 2 05 The following example of the use of Auto Expand Capacity will add two unconfigured drives to an existing three drive RAID group configured as one logical drive Starting configuration is shown in Figure 3 2 Advanced Configuration 206 216 93 123 Controller 0 Drive Groups Logical Drives Logical Drives MB Drive Groups MB E O E 1032 RAIDS Ungrouped Drives MB Clear All Add Group Make Hot Spare Figure 3 2 Existing Array to Expand 1 Select Administration Auto Expand Capacity The Auto Expand Capacity dialog box appears Figure 3 3 Auto Expand Capacity Drive Groups Logical Drives MB Drive Groups MB E L z o ioe ADS Ungrouped Drives MB Figure 3 3 Auto Expand Capacity Adds All Unconfigured Drives Manual No 771968 Using MORE with Global Array Manager 2 05 Note that both unconfigured drives will be added to the RAID group and that a new logical drive will be created The highlight indicates the state of the configuration that will exist if the expansion is accepted 2 Click Apply to accept the automatic expand capacity configuration shown The restriping process is ready to begin and a confirmation message appears Figure 3 4 Expand Capacity 2 Expand Capacity is not a reversible operation
14. pacity when the need arises As storage requirements increase MORE not only allows the user to add to the size of an online array but also to do it remotely through Global Array Manager 2 05 Operating Characteristics of MORE The following are operational characteristics of MORE e The minimum number of physical drives in the source RAID drive group pack is two 2 The maximum is seven 7 e The maximum number of system logical drives prior to adding capacity is 31 e One 1 to six 6 drives can be added at one time as long as the total number of physical drives in the drive group will not exceed eight 8 e The capacity of each added physical drive must be equal to or greater than that of the smallest drive in the source drive group e Capacity cannot be added to an array containing a spanned system drive e If more than one system drive resides on the drive group to be expanded ALL system drives will be processed at one time e The extra capacity can be assigned a new system drive number if so requested by the user e No configuration updates are allowed during the expansion process e The expansion process will not run if the targeted drive group is already in critical mode 1 2 MORE User Reference Guide Introduction to MORE DAC960 Functions with MORE When running MORE the Mylex DAC960 Disk Array Controller operates with the following characteristics 1 In order to complete the expansion process
15. power has been restored Physical drives may be relocated during power off Manual No 771968 1 3 Introduction to MORE After the expansion has completed the new capacity must be configured It is recommended that the new capacity be configured as a new logical drive Use the Global Array Manager 2 05 or DACCF Utilities 4 4 to optimize the drive settings and RAID levels on the newly added capacity Note Refer to the Global Array Manager 2 Installation Guide and User Manual Mylex part number 771961 or the DACCF Utilities Installation Guide and User Manual Mylex part number 771953 Requirements e DAC960 P Family Controller Firmware version 3 5 or above e DACCF Utilities 4 4 or e For use with GAM2 existing installed Global Array Manager Client Software 2 0 for Windows NT or Windows 95 the Global Array Manager 2 05 upgrade will only install over a previously installed GAM 2 0 client and GAM Server software installed for Windows NT Novell NetWare SCO UNIX or Novell Unix Ware 1 4 MORE User Reference Guide Chapter 2 Using MORE with DACCF 4 4 Overview DACCF Utilities 4 4 is the first version of the DAC960 configuration utilities to include a method for adding capacity to an existing RAID group known as a pack Instead of deleting a pack and recreating 1t with the additional drive s a new function called Add Drive to Last Pack allows the user to select one or several drives to add
16. ral hot spare standby drives to an existing RAID drive group or allocates one or several newly installed drives to an existing drive group The expansion process restripes all of the data on the existing drive group across all of the drives which make up the new drive group Figure 1 1 Old RAID Group Hot Spare or New Drive Expanded RAID Group Figure 1 1 MORE Restripes Data Across All Drives in the RAID Group MORE allows system administrators to manage the changing storage needs of servers equipped with feature set compatible Mylex DAC960 Disk Array Controllers operating under Windows NT Novell NetWare SCO UNIX and Novell UnixWare 1 MORE can be implemented offline under DOS by using DACCF Utilities 4 4 Manual No 771968 1 1 Introduction to MORE How MORE is Implemented MORE is a feature enhancement in Mylex DAC960 P Family Disk Array Controllers equipped with DAC960 Firmware version 3 5 or above MORE is activated and monitored by software Its RAID capacity expansion capability can be accomplished in one of the following ways 1 The Add Drive to Last Pack feature within the DACCF Utilities 4 4 2 The Auto Expand Capacity or Expand Capacity features within Global Array Manager 2 GAM2 version 2 05 client software RAID expansion using MORE provides a powerful upgrade path for increasing storage ca
17. rsor keys for selection hit lt ENTER gt to select lt ESC gt to Exit Figure 2 6 Pack A Was Expanded Return to Menu Manual No 771968 2 5 Using MORE with DACCF 4 4 Your next tasks will be to define one or more system drives for the new available capacity then to initialize those system drives Both of these procedures are clearly described in the DACCF 4 2 DACCF Utilities Installation Guide and User Manual Mylex Part Number 771953 Please refer to the appropriate sections of the above mentioned document for detailed instructions 2 6 MORE User Reference Guide Chapter 3 Using MORE with Global Array Manager 2 05 Overview While Global Array Manager 2 0 allowed system administrators to add logical drives without affecting existing RAID groups Global Array Manager 2 05 is the first version of this software to include a method for adding capacity to an existing RAID group Instead of deleting RAID groups and recreating them with the additional drive s new functions called Auto Expand Capacity and Expand Capacity allow straightforward automatic expansion of a RAID group by restriping existing RAID group data across a new target group consisting of more drives Installing Global Array Manager 2 05 GAM 2 05 is a maintenance upgrade for users of GAM 2 0 Installation of GAM 2 05 is identical to that of its predecessor except that it requires the presence of GAM 2 0 to install successfu
18. tempting to expand capacity manually e The selected RAID group drive group must be RAID 0 1 5 or 0 1 not exceeding seven 7 existing drives e When adding unconfigured drives to a RAID group the total number of drives in the RAID group should not exceed eight 8 Refer to Operating Characteristics of MORE in Chapter 1 for additional details The following example of the use of Expand Capacity will add one unconfigured drive to an existing three drive RAID group with two RAID 5 logical drives One new logical drive will be created and configured as RAID 0 1 Mylex RAID 6 Starting configuration is shown in Figure 3 5 Advanced Configuration 206 216 93 123 Controller 0 Drive Groups Logical Drives Drive Groups MB Logical Drives MB ee 0 J 516 RAD5 1 J 516 RAIDS Ungrouped Drives MB Clear All Add Group Make Hot Spare Seve ta kile fal Figure 3 5 Existing Array to Expand Manual No 771968 3 5 Using MORE with Global Array Manager 2 05 1 Select Administration Expand Capacity The Expand Capacity dialog box appears Figure 3 6 Expand Capacity Drive Groups Logical Drives Drive Groups MB Logical Drives MB 0 516 RAIDS 1 J 516 PAD5 Ungrouped Drives MB S16 516 13 14 op f Cancel Figure 3 6 Expand Capacity Allows Manual Control 2 Select one of the two unconfigured drive icons by cli
19. to the last pack that was created Note A limitation of MORE under DACCF 4 4 is that only the last pack can be expanded restriped Packs that were created prior to that pack are not available for automatic capacity expansion using MORE Installing DACCF 4 4 Installation of DACCF 4 4 is identical to that of its predecessor DACCF 4 2 Therefore installation instructions will not be repeated in this document Refer to the documentation that accompanied DACCF 4 2 DACCF Utilities Installation Guide and User Manual Mylex Part Number 771953 for installation instructions Manual No 771968 2 1 Using MORE with DACCF 4 4 Adding Capacity Under DACCF 4 4 Procedure On the Main menu use the View Update Configuration option to expand the capacity of an existing RAID group pack 1 Select View Update Configuration from the Main menu Figure 2 1 MYLEX Disk Array Controller Configuration Utility Version 4 4n mm dd yy n Channel mm Target DACI6BXX in Firmware version 3 5n Main Menu 61 Automatic Configuration BZ New Configuration 64 Rebuild 5 Initialize System Drive B6 Consistency Check 87 Tools 8 Select DACI6B 9 Advanced Functions 18 Diagnostics Choose this option to view edit write policy add additional System drive s add Standby drive s to existing configuration Use Cursor keys for selection hit lt ENTER gt to select lt ESC gt to Quit
20. ty Status 3 8 MORE User Reference Guide
Download Pdf Manuals
Related Search