GeoVision GV-Data Capture Troubleshooting
Contents
1. 9 Select the item of Software POS Driver Only for Graphic mode POS system in the Install Program 2 menu SS 10 Follow the on screen instructions to complete the installation 11 Go to Windows Startup point to Programs select DVR POS and then click DVR POS Driver This displays the window as below Eifel Fs End Semice Mot connected 12 Click Start Service and then select the COM port to send graphic data to the GV System Make sure the GV System is also set up and ready for this application GeoVision Inc 3 Revision Date 2005 7 212. C GeoVision Connecting graphic mode POS system cash register Graphic Mode POS System Cash Register Connection GV System is only compatible with the graphic mode POS system cash register with the following two characteristics Windows operation system Serial COM output Requirements Software V6 1 Hardware An appropriate USB dongle Note There are four types of dongles 1 2 3 and 4 ports available to connect up to 4 POS systems Connecting Graphic Mode POS System Cash Register The diagram below focuses on the connection between the POS system and GV System If you are using a cash register for connection please remember that your printer is internally connected already 1 Connect the POS system to GV System as illustrated below Make sure the dongle is attached tightly to the USB port of the GV System Windows based and built in serial port POS system Cross over RS232 GV System USB dongle Printer GeoVision Inc 1 Revision Date 2005 7 21 C GeoVision Connecting graphic mode POS system cash register The setup at the GV System 2 Go to the main panel in GV System Click Configure point to POS Application Setting and then select POS Device Setup This brings up the POS Server Setup dialog box 3 Click the New button to display the COM setting dialog box as shown below Printer Type Serial Port Device Pos 1 Mapping camerat f Earr
3. a Camera 1 POS Module GraphMode COM Port com 1 gemm Mone 3 1 w Cash Drawer open signal Moduel 1 input M Trace mode Add Cancel 4 Inthe POS Module field select GraphMode gn Configure other available options as below m Device Assign the POS system cash register to a camera screen POS 1 displays the images and data on the Camera 1 screen POS 2 on the Camera 2 screen and so on Click the button next to the item to rename the device COM Port Select the COM port that the POS system cash register is connected to Cash Drawer Open Signal This option is only available when an input module is configured in the main system Assign the input module connected to the cash drawer Every time when the cash drawer is opened a signal will be sent to the main system and recorded in System Log for later retrieval m Trace Mode Check this option only after getting the recommendation from our technical support staff 6 After above settings click Add to add the POS system cash register to GV System GeoVision Inc 2 Revision Date 2005 7 21 ae GeoVision correcing gaomode POS systems ese The setup of the POS Data Sender program at the POS system cash register 7 Insert the Installation CD to the POS system It will run automatically and pop up a window 8 Select the item of Install Vxxx system For example if your version is 7 0 you ll find Install V7 0 system in this window
Download Pdf Manuals
Related Search