BAT50 Installation and User Guide
Contents
1. BAT50 Installation and User Guide The BAT50 is a self contained asset tracker with no external connections internal battery and internal GSM GPS antenna Dimensions Length 146 7mm 5 34 Inches Width 63mm 2 1 4 inches ae Thaler ai Height 20 4mm 7 8 inches Weight 168 grams 5 92 Oz Environmental Specifications E POSITION TRACKING Temperature Operating 30c to 85c Storage 40c to 85c Water Resistance The BAT50 is water resistant pursuant to the USA IP 66 rating Device cannot be immersed in water Activating the Tracker To activate the tracker press and hold the power button for five 5 seconds until you see a blinking light Once the LED goes dark the device is activated The device will generate an auto report at power up and begin the clock to schedule subsequent auto report messages LED Indications The LED will blink 12 times within a three 3 second period if the battery voltage is in its highest range If the battery is within its normal voltage range the LED will blink on for one 1 second off for one 1 second then on for one 1 second When the LED is off the device is active To turn the device off press and hold the power button for five 5 seconds The LED will go solid Once the LED is off the tracker is turned off Installing the Tracker Mounting Hardware not included The tracker can be mounted to any surface The optimal mounting position for the tracker is outdoors m2. ounted horizontally with a clear view of the sky Some considerations for choosing the install location The device should be installed label side down as horizontally as possible If a horizontal location is not possible ensure that the device is attached to the asset with the label side towards the asset and the top of the device faces towards the sky as much as possible The selected area should not allow water to pool around the device Be careful to avoid damage to wiring electronics plumbing etc when drilling holes to mount the device The device should be installed where it is protected from being impacted during operation Recommended mounting hardware Qty 4 8 self drilling sheet metal screws Qty 4 8 lock washers Zip ties Double Sided PSA Tape Battery Replacement The internal battery is NOT user serviceable If the battery runs out the tracker will have to be returned to the factory for battery replacement EED cs STEALTH POSITION TRACKING
Download Pdf Manuals
Related Search