Home

Operating Instructions

image

Contents

1. Copying From Glass il Raise the Platen Cover optional or the Document Feeder optional Place the original face down on the original glass and align it against the left rear corner of the glass When copying highly transparent originals such as overhead transparencies or tracing paper supiol82 212 242 Operating Instructions place a blank sheet of paper A the same size as the original or larger over the original B Lower the Platen Cover optional or the Automatic Document Feeder optional carefully Set the number of copies G Press the START key Using the ADF RADF i Place and align all the originals in the ADF RADF i Place them face up and align the side guides to the original length When placing a large amount of originals with a long width Pull out the original stopper so that the exiting originals will not fall When replacing this stopper lift it slightly and push it in Set the number of copies G Press the START key Selecting Image Mode You can select the most suitable quality of the copied image in the following three modes depending on the originals TEXT PHOTO Originals with text and photographs mixed PHOTO Originals with photographs TEXT Originals with text only or with text and fineillustrations only i Place the original in the glass or ADF Press the original mode button until the lamp of TEXT PHOTO il O0
2. i PHOTO fil O TEXT v the desired mode is lit Press the START key AUTO Alternating Copying When you make several sets of copies the copies eee cere ey can be sorted and made to exit alternately one set Dy by one This is called alternation You need to place Copy paper in one drawer in a landscape direction and place that of the same size in another drawer in a portrait direction in advance ya Place the original on the Glass or Document Feeder Select FINISHING in the copy menu and then oress the ENTER button Select ALTERNATION and then press the ENTER button aieesieinmes DUPLEX 2INl 4InN1 IMAGE SHIFT DUAL PAGE ID CARD EDGE ERASE ANNOTATION xY ZOOM 3 PAPER TYPE JOB BUILD JOB MEMORY ALTERNATION g Select the other copy modes as required and then press the START key Copying on Both Sides Using RADF e Si Sj igj You can copy 1 sided or 2 sided originals on both sides of the paper 3 qa Place the original in the RADF DUPLEX Select DUPLEX in the copy menu and then press fl gt H the ENTER button 4 a Select the duplex copying mode and then press the ENTER button 1 gt 2 DUPLEX 1 sided original to 2 sided copy 2 gt 2 DUPLEX 2
3. arefully Repeat this procedure two or three times Open the side cover 8 Pull the transfer unit toward you carefully to lay it down while holding the green lever Wl Take out the transfer charger cleaner out of the front pocket of the transfer unit IB Wipe the transfer charger wire with the transfer charger cleaner 8 Return the transfer charger cleaner into the cleaner pocket and then close the transfer unit Close the side cover iG Close the front cover A For Toshiba Service and Supplies call 1300 887 600 www eid toshiba com au
4. sided original to 2 sided copy g Select the finishing mode and then press the ENTER button BOOK TYPE Open to left TABLET TYPE Open to top G Select the other copy modes as required and then press the START key DUPLEX BOOK TYPE TABLET TYPE Optional ADU is required Interrupting Copying i Press the INTERRUPT button Replace the original with the new document a Select the copy modes as required and then press the START key g After you have finished interrupt copying press the INTERRUPT button Place the old original back ENERGY USER SAVER INTERRUPT FUNCTIONS O MIXED 4 size G1O C_ AMS fg APS tC SETTINGS Job interrupted 10 NONSORT g Press the START key to resume the interrupted job ZOOM _ F INISHING TOSHIBA Leading Innovation gt gt gt Replacing Toner Cartridge l Open the front cover Hold down the green lever Pull out the toner cartridge g Shake the new toner cartridge strongly with the label surface down to loosen the toner inside G Remove the protective sheet from the end of the cartridge G Remove the protective sheet from the end of the cartridge K Insert the toner cartridge along the rail E Clean the charger Hold the cleaning knob of the charger and pull it out toward you carefully until it comes to a stop Then reinsert it in its original position c

Download Pdf Manuals

image

Related Search

Related Contents

GETTING STARTED EMPEZANDO COMMENCER  DZ70 取扱説明書  Service Manual  NAVI-CONNING 3000 CONNING 3000  IBDSim version 1.4 User manual - Antoine Leblois  LPCXpresso  en/ ACS355 drives quick installation guide  ACTi PMAX-0305  Samsung 732NW User Manual  

Copyright © All rights reserved.
Failed to retrieve file