USER MANUAL
Contents
1. EAM DANGER This product contains a low power laser device LASER SAFETY This unit employs an optical laser beam system in the CD mechanism designed with built in safeguards Do not attempt to disassemble refer to qualified service personnel Exposure to this invisible laser light beam may be harmful to the human eye THIS IS A CLASS 1 LASER PRODUCT USE OF CONTROLS OR ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS LASER LIGHT BEAM EXPOSURE The marking plate is indicated on the back side of the unit CONTROL PANEL OVERVIEW SS PLA OD Teo 10 11 12 FMANTENNA FUNCTION SWITCH DIAL SCALE FM AM RADIO TUNING KNOB CD DOOR LEVERAGE SKIP UP FAST FORWARD BUTTON REPEAT BUTTON PLAY PAUSE BUTTON SPEAKERS CD TRACK DISPLAY PROGRAM INDICATOR ON INDICATOR 14 15 16 17 18 19 20 21 22 23 10 A2A0 ONO BO N O O BATTERY COMPARTMENT AT THE BOTTOM AC SOCKET AT THE BACK HANDLE CD DOOR AUX IN JACK VOLUME KNOB STOP BUTTON PROGRAM BUTTON SKIP DOWN FAST REWIND BUTTON REPEAT INDICATOR PLAY INDICATOR POWER SOURCE Battery Installation 1 Open the Battery Compartment cover by pushing the catches downwards 2 Install 6 x C size batteries not included securely following the polarities indicated in the battery compartment 3 Close the Battery Compartment with the cover NOTE Please dispose of used batteries in an envir2. TEAC PCD807 Portable CD Boombox USER MANUAL IMPORTANT WARRANTY INFORMATION INSIDE PLEASE READ Trademark of TEAC Corporation JAPAN www teac com au TEA WARRANTY PROCEDURE v1 5 2 DEC 2011 Please read the owner s manual carefully and ensure that you have followed the correct installation and operating procedures 1 Please read this warranty card 2 Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service 3 If you require Warranty Service please contact the TEAC Customer Support Hotline at 1300 553 315 for assistance Please ensure that you have the model number serial number and purchase receipt ready when you call Please complete the section below and keep this information for your own records Owner s Name Owner s Address Postcode Model Name No Serial No Dealer s Name Dealer s Address Postcode Authorised Service Centres in Major Australian Cities NSW Queensland Western Australia 151 Arthur Street Unit 1 320 Curtin Ave West Unit 2 50 Pilbara Street Homebush West NSW 2140 Eagle Farm QLD 4009 Welshpool WA 6106 South Australia Victoria 11 McInnes Street 282 Normanby Road Ridleyton SA 5008 South Melbourne VIC 3205 Thank you for selecting a TEAC product If you should require assistance with your product regarding its setup or operation or if any difficulties arise please call us directly for advice betwee
3. ce Centres will use their best endeavours to complete product repairs within a reasonable period based on available resources and workload during the time when service is requested and performed Refurbished parts may be used to repair the product In the case of a replacement the product may be replaced with a refurbished unit of the same type or if one is unavailable a similar refurbished model with equal or better features amp specifications Please be advised that if the product presented for repair is capable of retaining user generated data the data may be lost during servicing Customers are strongly encouraged to back up all important information data before sending the product in for service repair Service will be provided only during normal business hours and under safety conditions and circumstances TEAC and its authorised service agents can refuse any repair if safety in relation to OH amp S becomes a concern to its staff or authorised service agents personnel The warranty is void and warranty claims may be refused subject to the Australian Consumer Law if a The product was not transported installed operated or maintained according to manufacturer instruction or b The product was abused damaged tampered altered or repaired by any unauthorised persons or c Product failure is due to accidents during use installation or transit power surges use of defective or incompatible external devices exposure to abnormal
4. conditions such as excessive temperatures or humidity or entry of liquids objects or creatures into the product No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it in connection with the sale of any equipment other than as stated in this warranty and outlined above TEAC reserves the right to inspect and verify whether the product is exhibiting a major failure as claimed by customers retailers LCD dead pixel policy please contact TEAC Customer Support Hotline on 1300 553 315 for assistance SAFETY PRECAUTIONS WARNING The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shalll be placed on apparatus A minimum distance of 5cm should be left arround the apparatus for sufficient ventilations No naked flame sources such as lighted candles should be placed on the apparatus When replacing the battery be sure to dispose of the old one in accordance with the current regulations To this end deposit it at a point which has been provided for this purpose in order that it will be disposed of in a safe and environmentally friendly way The apparatus can be worked regularly between 10 to 40 C To prevent fire or shock hazard do not expose this appliance to rain or moisture The ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc Excessive
5. ess during CD playback to pause The PLAY Indicator will flash while playback is paused Press again to resume playing from where the audio was paused STOP BUTTON Press once to stop playing the CD SKIP UP SEARCH FORWARD BUTTON Press once to skip to next track Press and hold to search for a desired position at high speed forward Release the button to resume normal play SKIP DOWN SEARCH BACKWARD BUTTON Press once to skip back to the beginning of the current track Press repeatedly to go to previous track Press and hold to search for a desired position at high speed backward Release the button to resume normal play REPEAT BUTTON e Press once to turn on single track repeat playback The REPEAT Indicator will flash while in this mode Press twice to turn on repeat playback for all tracks The REPEAT Indicator will be lighted up continuously while in this mode e To turn off repeat playback press the REPEAT Button once or twice until the REPEAT Indicator turns off To remove the CD from the unit press the STOP Button open the CD Door and take out the CD To turn off CD playback push the Function Switch to the OFF position Programmed CD Playback Play tracks in a chosen order by programming a playlist of up to 20 tracks 1 Press the PROGRAM button The PROGRAM indicator and 01 will flash on the display 2 Press the SKIP UP FAST FORWARD and or SKIP DOWN FAST REWIND Buttons to select the desired track number 3 P
6. ingers to come in contact with the shiny unprinted side of the disc N y Do not attach adhesive tape stickers etc to the disc label Clean the disc periodically with a soft lint free dry cloth Never use detergents or abrasive cleaners to TI clean the disc If necessary use a CD cleaning kit o f a disc skips of gets stuck on a section of the disc it is probably dirty or damaged scratched When cleaning the disc wipe in straight lines from the center of the disc to the outer edge of the disc Never wipe in circular motions COMPACT This unit is designed to play only Compact Discs bearing the identification logo as shown here DIGITAL AUDIO Other discs may not conform to the CD standard and may not play properly Compact Discs should be stored in their cases after each use to avoid damage Do not expose Compact Discs to direct sunlight high humidity high temperatures or dust etc Prolonged exposure or extreme temperatures can wrap the disc Do not stick or write anything on either side of the disc Sharp writing instruments or the ink may damage the surface SPECIFICATIONS Power Consumption AC 230V 50Hz 6W 6 x C Size Batteries batteries not included Power Output 0 8W RMS per channel Frequency Range FM 87 5 108 MHz AM 522 1620 kHz Frequency Response CD 125 Hz 15000 Hz Dimensions 223 L x 201 D x 126 H MM Weight 1 2 kg Weight and dimensions are approximate Specificatio
7. n Monday to Friday at 8 30AM 6PM AEST at the TEAC Customer Support Hotline 1300 553 315 teacservicesupport 2 awa com au www teac com au T EAC WARRANTY INFORMATION v1 5 2 DEC 2011 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Warranty Terms amp Conditions 1 TEAC warrants that this product is free from defects in material and workmanship under normal domestic use with reasonable care and skill Maintenance and cleaning i e laser head is not covered by this warranty The TEAC warranty only applies to TEAC products purchased used and serviced in Australia The benefits to the consumer given by this Warranty are in addition to other rights and remedies of the consumer under a law in relation to goods or services to which the warranty relates being the Australian Consumer Law Refund or replacement via your retailer is available for a period of 14 days after purchase for goods that have been inspected and determined to have a major failure Refund and exchange is not applicable for change of mind Subject to the terms herein this warranty effectively covers the equipmen
8. ns may change without prior notice TEAC TEAC CUSTOMER SUPPORT HOTLINE TCS 1300 553 315 Between Monday to Friday AEST 8 30AM to 6PM
9. onmentally responsible manner AC Power Operation 1 Connect the power cord receptacle to the AC Socket on the unit and the plug to an AC power outlet 2 Turn on the power supply at the AC power outlet CAUTION Please turn off the power supply at the AC power outlet while making or changing plug connections UNIT OPERATION Radio Operation 1 Push the Function Switch to the AM or FM position The ON indicator will light up 2 Tune into a desired station by turning the Tuning Knob 3 For FM radio extend the antenna and adjust the direction length and angle to find the best reception 4 For AM radio rotate the unit to find the best reception 5 Adjust the Volume Knob for your desired listening level 6 To turn off the radio push the Function Switch to the OFF position Loading a CD 1 Push the Function Switch to the CD position The ON indicator will light up 2 Use your fingertip to open the CD Door Place a CD with the printed label facing upward firmly into the compact disc compartment and close the CD Door 3 The CD Track Display will show the total number of tracks after a few seconds 4 no will be displayed when there is no CD inside the CD compartment NOTE This unit can play normal audio CDs CD R and CD RW discs CD Playback Controls PLAY PAUSE BUTTON e After a CD is loaded press to start playing the CD The CD Track Display will show the first track and the PLAY Indicator will light up Pr
10. ress once the PROGRAM Button again to memorize the track Repeat steps 2 and 3 until all desired tracks are programmed 5 Press the PLAY PAUSE Button to start playing The PROGRAM Indicator will light up 6 When needed press the STOP Button to stop programmed playback Press the PLAY PAUSE Button to resume programmed playback Open the CD Door or turn off CD playback to clear the programmed playlist When in stop mode pressing the STOP Button clears the program playlist also NOTE Programming can only be made when the CD player is in stop mode Aux In 1 To listen to an external audio source equipped with an auxiliary audio output jack such as an MP3 player or smartphone you need a stereo aux cable with 3 5mm plugs not included 2 Connect one end of the aux cable into the output jack on the audio source unit and the other end into the AUX IN Jack on this unit 3 Play the audio source Push the Function Switch to AM FM or RADIO positions The ON indicator will light up 5 You can now listen to audio from the audio source through the unit Adjust the Volume Knob for your desired listening volume Control media playback on the audio source unit directly 6 To turn off the unit set the Function Switch to the OFF position NOTE Always unplug the 3 5mm plug cable from the unit after use CARE AND MAINTENANCE Caring for Compact Discs Treat the disc carefully Handle the disc only by its edges Never allow your f
11. sound pressure from earphones and headphones can cause hearing loss The batteries shall not be exposed to excessive heat such as sunshine fire or the like NOTE Main plug is used as the disconnect device It shall remain readily operable and should not be obstructed during intended used To be completely disconnected the apparatus from supply mains the main plug of the apparatus shall be disconnected from the mains socket outlet completely In case of malfunction due to electrostatic discharge just reset the product reconnection of the power source may be required to resume normal operation IMPORTANT Since the CD circuitry may cause interference to other radio tuners nearby switch this unit off when not in use or move it away from the affected radio tuner RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK The exclamation point within OF ELECTRIC SHOCK DO NOT the triangle is a warning sign REMOVE COVER OR BACk NO alerting you of important USER SERVICEABLE PARTS INSIDE instructions accompanying REFER SERVICING TO QUALIFIED the product SERVICE PERSONNEL The lightning flash and arrowhead within the triangle is a warning sign alerting you of dangerous voltage inside the product WARNING To reduce the risk of fire or electric shock do not expose this appliance to rain or moisture CAUTION CLASS 1 LASER INVISIBLE LASER RADIATION WHEN OPEN PRODUCT AND INTERLOCKS DEFEATED AVOID EXPOSURE TO B
12. t as specified in the Warranty Periods Table below from the date of purchase TEAC PRODUCT WARRANTY PERIOD LED LCD TV 32 80 cm and above 1 Year In Home Service Pick up Available All other TEAC products 1 Year Carry in Service 5 In Home Service Pick up Service This service will only be provided as part of this warranty if all the following conditions are met a The product is indicated in the Warranty Period Table b The product is within the warranty period c The product is located within the normal service area of the local TEAC Authorised Service Centre If TEAC determines that the product is not repairable on site TEAC can complete the repair by taking the product to a TEAC Authorised Service Centre Carry in Service Where In Home service Pick up is not available the purchaser is required to send the product to the nearest TEAC Authorised Service Centre for repair In this event proof of purchase is required to support a warranty claim After the repair the product will be available for collection by or return to the purchaser at a fee upon request TEAC in home service can be made available at a fee upon request A 12 month replacement warranty is applicable to all Accessories such as Remote Power Adaptors and Cables TEAC will ensure to the best of its abilities that all required parts are made available for any required service repair TEAC Australia Pty Ltd and its Authorised Servi
Download Pdf Manuals
Related Search