Home
Scope Anamorphic Lens user manual LP Morgan
Contents
1. 4 Replace the case cover and tighten the 8mm cap screws 5 Check for fingerprints and wipe only with a lens wipe or lint free lens cloth Re install lens and make the necessary adjustments to the projectors alignment You will notice a marked and noticeable improvement in the focus of text and images mostly at the corners of the image area 7 LP Morgan user manual LP Morgan Anamorphic Lens Installation Instructions QUICK SETUP GUIDE How to adjust your element to achieve the sharpest picture Step 1 Place the element in the rear of the lens Step 2 Turn Projector ON and display a test pattern Step 3 Adjust your Projector s focus and note the degree of sharpness onscreen Flip the element 180 Front to Back SIDE B FLIP 180 Step 4 Note which orientation gave the best results Step 5 Rotate the Element 90 in one direction i ROTATE 90 i i i Step 6 Adjust your Projector s focus and note the degree of sharpness Step 7 Note which orientation gave the best results This is the Final orientation of the element Step 8 Mount the Element in the Rear of the Lens Step 9 You re Done Enjoy your upgrade 8 LP Morgan user manual LP Morgan Anamorphic Lens Installation Instructions Warranty Information Please fill out the online warranty form or the warranty card included with the product and post it back to Herma at the reply p
2. LP Morgan Scope Anamorphic Lens user manual lomorgan www pmorgan com au LP Morgan Anamorphic Lens Installation Instructions To the owner Congratulations on purchasing an LP Morgan Scope Anamorphic Lens Please take a moment to review this manual as it will ensure you many years of trouble free service from your new Scope Anamorphic Lens 1 LP Morgan user manual LP Morgan Anamorphic Lens Installation Instructions Please read this instruction manual before installing Please note Take extra care when handling the lens so as not to mark the surface these lenses have optical coatings and are sensitive to natural oils and other dirt on fingers and hands which can be detrimental to the lens performance Only clean with an optical lens cloth lint free lens wipe The optical coatings are fully inspected before despatch and warranty does not cover installation damage due to lack of care taken LP Morgan Scope Anamorphic Lens Features e Professionally designed low dispersion ground glass optical elements Broadband anti reflective coatings for 94 plus light transmission efficiency e Projector throw ratio compatibility 1 4 plus e 1 33 x horizontal expansion factor for Constant Image Height viewing e Compatible with 2 35 1 up to 2 40 1 aspect ratio screens although geometry is optimised for 2 37 1 LP Morgan user manual 2 LP Morgan Anamorphic Lens Installation Instructions After unpack
3. aid address on the back cover The warranty covers defects in workmanship and materials provided this product has been installed in a normal environment and maintained according to the written instructions Herma warrants the product against loss of usefulness discolouration or deterioration of optical quality within the warranty period as a result of manufacturing or material defects This warranty applies only within Australia Conditions All costs related to installation and re installation of the Herma equipment covered by this warranty are not the responsibility of Herma Technologies Herma will not be responsible for any consequential damages or costs resulting from during or following installation procedures Herma will repair or replace with the least possible delay any defective equipment Any equipment replaced pursuant to the terms of this warranty shall be retained by Herma The user is responsible for any freight costs relating to repair or replacement The Product must be returned to Herma in suitable packing to prevent damage in transit Herma will not accept any responsibility for damage to the equipment caused by inadequate or unsuitable packing or for any damage howsoever caused whilst the goods are in transit Herma Technologies shall not be liable for any injury loss or damage direct or consequential arising out of the use of misuse of or inability to use the equipment The warranty does not cover any equip
4. ide LP Morgan user manual 4 LP Morgan Anamorphic Lens Installation Instructions Mounting Instructions Please be sure to check that the projector mount is secured well enough to hold the extra weight of lens and plate Step 1 Mount the LP Morgan Skyhook arms to the projector as per normal method leaving the centre bolt loose Step 2 Slide mounting plate onto the bracket at the centre bolt leaving Skyhook hook at top of plate Note The mounting plate can be used either way upside down for broader adjustment flexibility wherever required Skyhook arms Mounting Plate Step 3 Work out the best position for the bracket and projector so that the anamorphic lens is positioned as close as possible to the projector s lens and tighten the centre bolt Step 4 If using the Lens Slide mount it to the mounting plate Step 5 Mount the projector back onto the Skyhook making sure to fully tighten all the bolts and then attach the lens Step 6 Make final adjustments and sit back and take a moment to enjoy the CineTheatre experience 5 LP Morgan user manual LP Morgan Anamorphic Lens Installation Instructions Installation of fixed for Direct to Ceiling If installation is fixed position type and mounting height is an issue you will need to use the supplied extension arms by attaching them the bracket hanger arms extension arms Step 1 For obvious reasons the responsibilit
5. ing the LPM Morgan Anamorphic Lens please make sure that you have the complete kit and accessories if applicable Note If you also bought a Skyhook please follow the Skyhook Instruction Manual for instruction on Mounting the Skyhook Fixed Lens for Direct to Ceiling This is achieved by mounting the lens hanger securely and as close as possible to the projectors lens into a suitable structure in ceiling and if required using the extension arms to lower the lens into position You can then adjust the lens angle and the projector accordingly Note On board scaling within projector is required to watch 16 9 and Lens slider is optional extension arms Fixed mount showing extension arms 3 LP Morgan user manual LP Morgan Anamorphic Lens Installation Instructions Fixed for Drop Pole Install This method is used where projector is on a stem or projector bracket with a 300mm plus drop e The plate is fitted directly to the Skyhook projector bracket through the main centre bolt above the projector and the lens hanger then attaches to it e Attach the lens last and make fine adjustments to achieve the desired image size e If the lens slide is being used it s simply attached to the front of the plate and lens hanger then attaches to it Note We recommend using the Skyhook HD or HEAVY DUTY accessory kit as it is engineer rated to 35kg Mounting Plate Mounting plate method no lens sl
6. lpmorgan com au lp morgan May 2010 v1 0
7. ment which has been subjected to misuse abuse neglect accident or intentional damage improper voltage or any alteration which affects the reliability or performance of the equipment not attributable to faulty manufacture parts or labour and without limiting the generality of the foregoing This warranty does not cover any equipment where usage adaptation or installation including wiring of electrical connections are not in accordance with our written installation and operating instructions Warranty Period 1 year from date of installation not to exceed 15 months from date of invoice Visit www pmorgan com au pgs products warranty html for other info Information in this document is subject to change without notice Herma Technologies All rights reserved This document is protected against unauthorised copying electronic or otherwise Trademarks used in this text Herma the Herma Logo LP Morgan and LP Morgan logo are registered trademarks of Herma Technologies Other trademarks and trade names used in this document remain the property of the relevant owners 9 LP Morgan user manual LP Morgan Anamorphic Lens Installation Instructions BLANK PAGE LP Morgan user manual 10 Your LP Morgan Retailer is able to provide more information on our products Or visit www lpmorgan com au Factory 4a 6 Albert Street Preston Vic 3072 Phone 61 3 9480 6233 Fax 61 3 9480 6533 Email info herma com au www
8. y is on the installer to use suitable mounting hardware and to make sure there is sufficient structure above ceiling to attach mount the hanger into Step 2 Measure mark off position of hanger on ceiling making sure lens will be situated as closely as possible to the projectors lens Step 3 Use supplied extension arms to achieve desired height position and some minor tilt if necessary Step 4 Make final projector adjustments sit back and enjoy the CineTheatre experience LP Morgan user manual 6 LP Morgan Anamorphic Lens Installation Instructions Astigmatism Correction Element Note This optical glass element is designed as an upgrade to the standard lens where astigmatism is noticeable and correction is required Manufactured and designed to help where required to offset the projectors inability to focus sharply across the entire screen when using an add on anamorphic lens This can be common with short throw projectors used in home theatres Installation instructions assuming lens already installed 1 Carefully and with clean hands remove the LP Morgan Scope Lens from the mounting bracket and place on a suitable clean and clear work area Undo the two silver case cover cap screws that contain the rear prism using an 8mm socket or a suitable spanner Carefully unwrap and place the Astigmatism Correction Element into the casing Nb Try to only handle the optical glass element by the edges
Download Pdf Manuals
Related Search
Related Contents
RC50 service manual - argus realcold pty limited BC-TR30 Intel GA-N680SLI-DQ6 User's Manual Software and iPads CIAO CSI ed 5 - schede Sony KDL-40EX400 40" Full HD Black LCD TV User Manual: Tune2Print - Océ Sunbeam Bedding 001773-500-000 User's Manual JACK RJ-45 C5e - NXK Tecnologia Figure 686 08, 686 09 KHS-Timer-Set Copyright © All rights reserved.