Bye Bye Standby BBSLP power plug adapter
Contents
1. B 1 Insert your Bye Bye Standby socket into an electrical mains socket 2 Each socket must be set up with a remote before it can be used To set up your socket with your remote control press and hold the OFF button on the socket The LED on the socket will flash once every second indicating that it is ready to be set up 3 Choose one pair of buttons on your remote control to control your socket Press and hold the green ON button on your remote control the LED will flash rapidly and then remain on this indicates that your socket is ready to be used Technical Specifications Voltage 240VAC 50Hz Rating Max 13A 3000W On Off Indication LED Range lt 30M Battery Type 12VDC MN21 Important For indoor use only Keep away from all sources of water and moisture Do not overload Adult Installation only Use only as directed Always check wattage load and do not exceed the electrical devices specification Bye Bye Standby is a trading name of Enistic Ltd 10 Wornal Park Worminghall Bucks HP18 9PH www enistic com For further information on the Bye Bye Standby range of energy saving products please visit www ByeByeStandby co uk Before you can use your socket you must set it up See overleaf for details 4 To use plug the device that you would like to control into your Bye Bye Standby socket and press the green button to activate standby mode and the red button to take your appliance off standby 5 If you press the ALL ON2. button on your remote control all your sockets will be turned on if you press the All Off Button all of your sockets will be turned off Resetting The Socket 1 Ensure your Bye Bye Standby socket is turned off hold down the off button on your remote control for three seconds 2 Hold down the ALL OFF button on the remote control until the LED on the socket flashes rapidly and then once every second Tips To control your Bye Bye Standby socket with an additional remote control 1 Each socket can be controlled by more than one remote control including remote controls from the Bye Bye Stadnby classic range 2 To use your new Bye Bye Standby socket with a Bye Bye Standby classic remote control simply follow the set up instructions overleaf using A1 on your Bye Bye Standby classic remote control or any other code you wish to set Troubleshooting If your socket doesn t respond to the remote control 1 The battery in your remote control may have lost charge consider changing the battery 2 The socket and remote are too far apart move closer to the socket
Download Pdf Manuals
Related Search