T2 User Manual
Contents
1. V1 0 passwords ID cards or Mifare cards are available Step 4 user attendance Step 5 connect with PC and use the corresponding attendance software to download data etc Step 6 Set attendance rules query attendances and print reports in attendance software The product is developed for low lost practical function and easy use It uses the keypad to realize functions Since its convenient operations fashionable performance desktop seated design lightweight and flexibility it is really a good choice for user attendance Panel ten LCD Finger print sensor Speaker T2 User Manual V1 0 LED indicator it displays green during normal work and it displays red when the authentication is failed K eypad It includes the digit keys power key ESC key OK key and six function keys of Enroll FP PW Card Del User Time Set IN OUT As below shown PW Card Enroll FPO Enroll password ID e Set device time Enroll fingerprint or Mifare cards and fixed time of bell to ring Digit keys Del User Delete users CheckOut status and down key OK Power Exit IN Check in status and up key After power on the original window is as below shown Check In 11 109 12 Or Check Out 09 08 11 TUE T2 User Manual V1 0 2 Enrollment and Identification For the first time to use the device no administrator at this moment press2. the window as follows Chg Password Continue ESC OK Save 8 During the enrollment you can press ESC key one time or continually to exit and return to the original window 2 3 Delete a user Delete the enrolled users in system In the original window press Del User key to pop up the following window In User ID column input the number that you want to delete then press OK key to delete it from the device 9 T2 User Manual V1 0 Del User User ID 00001 ESC OK After deleting the next user ID is displayed in the window You can press OK key to continue deleting or press ESC key to exit 10 T2 User Manual V1 0 3 Other functions 3 1 Time Setting In the original window click TimeSet key to enter into the time setting window Scheduled 000 00 2009 7 30 9 38 55 ESC OK Press up or down key IN or OUT key to move the cursor to the different position and then change the corresponding time When the cursor is located in Scheduled you can set the time for the bell to ring Then the bell will ring at the fixed time 00 00 If the cursor in located in Scheduled you can press Del User to change the time as that is to close the fixed time bell After setting press OK key to save the time and exit from the time setting window with prompt voice Thanks 3 2 Power M anagement The device is equipped with power with USB co
3. T 2 User M anual T2 User Manual V1 0 Berre USC yasc Starnes 2 Enrollment and Identification 2 1 Fingerprint Enrollment 2 2 Password Enrollment 2 3 Delete a user 3 Other functions 0 00 1 Time Setting 2 Power Management 3 Attendance Status 4 Test Automatically 4 Attendance Management Contents T2 User Manual V1 0 1 Before use Read through this manual before operating this machine Firstly installing fingerprint machine well then the fingerprint enrollment and identification will be taken ded eth y Enrollment Installation Identification a d kb x Enrollment Installation Identification Use the index finger middle finger or ring finger but not the thumb and little finger because they are usually clumsy when pushing on the sensor window How to place the finger 1 The correct way Place a finger flatware on the sensor surface Place it to the center of the sensor surface T2 User Manual V1 0 2 The wrong ways Vertical Offset Component USB Switch power Universal Adaptor plug Backup name cable battery The recommended steps Step 1 install the machine completely and power on Step 2 enroll the administrator and users That is to enroll fingerprints passwords ID cards or Mifare cards Step 3 user identification Confirm whether the enrolled fingerprints T2 User Manual
4. e backup fingerprints of the same user at most Backup Enroll Continue User ID 00001 ESC OK 7 During the enrollment you can press ESC key one time or continually to exit and return to the original window T2 User Manual V1 0 2 2 Password Enrollment 1 Press PW Card key to enter into the menu In User ID column input the number that you want to enroll the number is from 1 65534 and press OK key to confirm New Enroll User ID 00003 ESC OK 3 In Input Pwd column input the password 5 bits and press OK key New Enroll Input Pwd iia ESC OK 4 Input the password again if two passwords are not in the same system will inform you to input the password again New Enroll Input Pwd mek Pwd Affirm 5 If they are in the same you will enter into the following window automatically The password is enrolled successfully Press OK key to continue enrolling the password of new user or press ESC key to change the password of just enrolled user Note the letter P in 00003 P indicates the password T2 User Manual V1 0 New Enroll 00003 P ESC OK Save 6 In step 5 if press OK key you will start to enroll a new user by referring to step 2 5 in the window as follows New Enroll Continue ESC OK Save 7 In step 5 if press ESC key you will start to change the password by referring to step 2 5 in
5. for four times and then press TimeSet key to display as follows Flash Test Pls Keep Pwr ON Continue ESC OK Press OK key to start testing The testing order is Flash LCD Voice fingerprint reader Key RTC During testing especially flash testing 12 T2 User Manual V1 0 please guarantee the stability of power otherwise the hardware of system maybe be damaged 4 Attendance M anagement This device is to record attendance time and the attendance software 1s to deal with report statistics The device can be connected with PC directly through USB cable The way to operation the attendance software please refer to lt lt Management System Explanation gt gt 13
6. n the original window press Enroll FP key to pop up the window as follows Enroll FP New Enroll ESC OK 2 Press OK key to continue to display the window as follows Note The ID number is 5 bits If your ID number is less than 5 bits system will add O at the front of the digit automatically For example the ID number is 1 the machine will display it as 00001 New Enroll User DO 00001 ESC OK 3 In User ID column input the number you want to enroll the number is from 1 65534 and press OK key to confirm then the screen will inform Place finger as follows Note If the User ID is 8888 you will enroll the only administrator New Enroll 00001 0 Place Finger ESC Exit 4 After pressing the fingerprint for three times system will enter into the following window automatically The fingerprint is enrolled successfully In this window press OK key to enroll new users or T2 User Manual V1 0 press ESC key to enroll backup fingerprints of just enrolled user New Enroll 00001 0 ESC OK Save 5 In step 4 if press OK key you can continue to enroll new users by referring to step 1 4 in the windows as follows New Enroll Continue ESC OK 6 In step 4 5 if press ESC key you will start to enroll the backup fingerprints by referring to step 1 4 in the window as follows You can enroll nin
7. nnector and backup battery When use power adapter with USB connector to supply power the backup battery is charged at the same time and the charging time shouldn t be less than 8 hours When the power is off or unable to be powered by power with USB connector the device will be powered by backup battery automatically and the saturated backup battery can supply power to device for 3 hours 11 T2 User Manual V1 0 There is an electricity icon MEP at the up right corner of LCD which is convenient for users to view the status and the electricity of backup battery When the device is only powered by the backup battery the icon indicates the battery electricity when the device uses the power adapter and the backup battery at the same time the icon indicates the charging status and electricity of backup battery when the device is powered by the power adapter no icon is displayed When the battery electricity is displayed as O grid the battery icon flashes and the buzzer will buzz to alarm per a second for five minutes 3 3 Attendance Status During checking attendance if you want to check in firstly press IN key to display Check IN on the screen then press fingerprint or password to authenticate If you want to check out firstly press OUT key to display CheckOut on the screen then press fingerprint or password to authenticate 3 4 Test Automatically In the original window press 6 digital key
8. the function key to enroll the administrator and users Only one administrator can be enrolled in the system the number is 8888 Firstly enrolling the administrator is recommended If the administrator is enrolled in the device only users can be enrolled If there is no administrator users can be enrolled by anyone If there is an enrolled administrator users can t be enrolled until passing the administration identification Two enrollment modes of fingerprint password are applied to people groups with different fingerprint quality individually Fingerprint enrollment is applied to the people group with good fingerprint quality and most people are in this group Fingerprint enrollment as well as password enrollment is applied to the people group who can enroll easily but authenticate difficultly and a small part of people are in this group Password enrollment is applied to the people group who can t enroll fingerprints successfully and about 1 percent of people are in this group maybe a little change in the actual use Before enrolling users if there 1s an enrolled administrator you must authenticate the administrator status Firstly press Enroll key then the device displays Administrator affirm at last press the fingerprint or password of administrator to authenticate Note if no administrator is enrolled you don t need the administrator authentication T2 User Manual V1 0 2 1 Finger print Enrollment 1 I
Download Pdf Manuals
Related Search