OPERATING INSTRUCTIONS FOR 2-Channel DMX
Contents
1. VDG OPERATING INSTRUCTIONS FOR 2 Channel DMX INTERFACE Model M35A X 10301 avenue Pelletier Montr al Qu bec Canada H1H 3R2 T l 514 272 6040 800 663 3020 Fax 514 722 3229 DMX INTERFACE MODEL M35A X FOR MDG FOG GENERATORS OPERATING INSTRUCTIONS To select the DMX base address shut off the power switch or disconnect the AC line from the generator Dial the appropriate address using the dip switch Determine the address by adding the value of the switches you turned on Every time you change the address you must remove and re power the generator because the address is read only on power up switch 1 as a value of 1 switch 2 as a value of 2 switch 3 as a value of 4 switch 4 as a value of 8 switch 5 as a value of 16 switch 6 as a value of 32 switch 7 as a value of 64 switch 8 as a value of 128 switch 9 as a value of 256 switch 10 sets the termination for the DMX line if last in line nothing plugged in the DMX out connector must be on Example address 78 switch 7 4 3 and 2 on all others off The Interface uses two 2 consecutive DMX channels Channel one turns the generator on or off All values under 50 are off over 50 you re on Channel two controls the fog emission All values over 7 wil turn the fog emission on LEDS Description Green Fog Generator ready Yellow Fog Generator heater on or if flashing rapidly it indicates that the generator is in a fail mode Page blanche Blan2. k page Red DMX data present
Download Pdf Manuals
Related Search