Operating Instructions: Ultima Closed Handling System
Contents
1. Operating Instructions Ultima Closed Handling System The purpose of the Ultima closed handling system is to avoid risks of operator exposure and contamination of the environment when filling applicator hoppers with the granular nematicide insecticide Mocap There are two parts to the system the returnable and refillable Ultima pack that Mocap is supplied in and the Ultima inlet valve fitted to the applicator hopper These operating instructions are intended to help you operate the system safely and effectively when using Mocap to control potato cyst nematode or reduce wireworm damage on all varieties of potatoes There are 12 essential steps to operation of the Ultima system which are illustrated in this booklet At the end there is also an important list of container handling precautions to note Arrange raised platform Break the green seal Do not break the red tamper evident Filling hoppers from a raised platform i seal Costs are incurred when empty such as a trailer enables packs to be containers are returned with the red lifted from waist height to minimise seal broken as they cannot be re filled the risk of back strain and have to be scrapped Remove safety caps Fit container to hopper From the hopper And from the container E Invert the container and whilst lowering it towards the hopper line up the metal lugs on the container valve with the grooves in the h2. only as directed Do not re use container for any other purpose Do not rinse out the container Return empty container to supplier Mocap application Mocap is approved for overall application Mocap should be broadcast shortly before or during the final soil preparations before planting and incorporated into the soil immediately following application preferably in the same operation Active ingredients and trademark acknowledgments Mocap contains ethoprophos Always read the label use pesticides safely
3. opper valve Turn anti clockwise to start Turn clockwise to stop an Sy ENBST Um j M4 e 2 m se i i um im See mS e Se au ay e Sey Turn the container clockwise to close the valve when empty or at any time to stop the flow of product Turn the container anti clockwise to start the flow of product into the hopper Use a closed cab tractor Replace safety caps For operator protection vehicles fitted with a closed cab must be used when applying and incorporating the product Having removed the container replace the safety cap and stack with empties Replace hopper cap before starting to apply product When application is finished any product remaining in the hopper should be drained out Before removing the bung from the metering unit make sure you have a suitable receptacle of sufficient capacity in place Drain unused product from hoppe r us n nw Store unused product safely EA ig 2X Manually operate the container E valve to open and close Pour unused product back in to the container in a draught free area and on hard standing so any accidental spill can be cleared up safely Store empty containers safely Container Handling Precautions Ultima containers should only be used in conjunction with hopper lids which have been modified to be used with them Do not use if the red seal is broken Open the container
Download Pdf Manuals
Related Search