SP 10EN Installation Manual CURVES
Contents
1. INSTALLATION MANUAL AMG AMC 2013 001 Revision 2013 03 04 po ae Reference plane EN54 24 2008 Horizontal plane 0359 CPD 0214 TYPE B lt Reference axis Loudspeaker enclosure 1 25W 2 5W 5W 10W 3 Select the desired wattage and ensure that the input cable is connected to the selected terminal the loudspeaker chamber and to no other connection as the unused transformer tappings must always be isolated from one another Secure the cable gland tight ensuring that all the rubber washers are in place for the fixing screws You will observe that the inner section of the chamber where the back lid was removed is a large EVA gasket please make sure that this is in a correct place when replacing the back lid 1 Remove the U bracket from the speaker Drill the mounting location holes for the unit in line with the U bracket 2 holes 30 millimeters apart in the surface where the loudspeaker is to be located 4 Re fit the speaker to the U bracket Position the speaker to the desired angle then tighten the fixings to secure in place Before connecting the speaker circuit to the power amplifier we strongly advise that the impedance of the circuit is checked to ensure it is fault free in order to prevent damage to the speaker and or amplification Thermal Fuse 2 Remove back lid of the unit cable gland end and connect input cable to the ceramic terminal2. block through the cable gland provided SP 10EN Circuit Diagram AMCBaltic Neries krantin 14A LT 48397 Kaunas Lithuania Phone 370 37 308585 3085Baq 370 37 30858B mailnfo amcpieu Web wwwamcpoeu AMC Balticerves the right to improve products at any time Specifications are subject to change without notice AMC is a registered trademark of AMC Balti
Download Pdf Manuals
Related Search