MS9535 VoyagerBT™ Wireless Hand-Held Laser
Contents
1. Metrologic METROLOGIC INSTRUMENTS INC MS9535 VoyagerBT Wireless Hand Held Laser Scanner Installation and User s Guide LOCATIONS CORPORATE HEADQUARTERS North America Metrologic Instruments Inc 90 Coles Road Blackwood NJ 08012 4683 EUROPEAN HEADQUARTERS Germany Middle East and Africa Spain Italy France United Kingdom Metrologic Instruments GmbH Dornierstrasse 2 82178 Puchheim b Munich Germany Metrologic Eria Ib rica SL Juli n Camarillo 29 D 1 Edificio Diapas n 28037 Madrid Metrologic Instruments Italia srl Via Emilia 70 40064 Ozzano dell Emilia BO Metrologic Eria France SA 69 Rue de la Belle Etoile ZI Paris Nord BP 50057 95947 ROISSY CDG CEDEX Metrologic Instruments UK Limited 58 Tempus Business Centre Kingsclere Road Basingstoke Hampshire RG21 6XG Metrologic Russia Bolshaya Novodmitrovskaya 14 RU 125015 Moscow Russia Customer Service 1 800 ID METRO Tel 856 228 8100 Fax 856 228 6673 Email info metrologic com Internet www metrologic com Tel 49 89 89019 0 Fax 49 89 89019 200 Email info europe metrologic com Germany Email info de metrologic com Tel 34 913 272 400 Fax 34 913 273 829 Email info es metrologic com Tel 39 0 51 6511978 Fax 39 0 51 6521337 Email info it metrologic com Tel 33 0 1 48 63 78 78 Fax 33 0 1 48 63 24 94 Email info fr metrologic com Tel 44 0 1256 365900 Fax 44 0 1256 3652. Reserved 9 Reserved Shield Ground 38 CRADLE AND CABLE TERMINATIONS CONTINUED MI9535 511 IBM MI9535C540 MI9535D540 Full Speed USB RS 232 Transmit Output RS 232 Transmit Output RS 232 Receive Input RTS Output 3 4 RTSOutput 7 USB 5V D O Reserved Reserved 10 Shield Ground 39 CRADLE AND CABLE TERMINATIONS CONTINUED USB Port USB B Type CSC Pon Cable Connector Configurations Host End RS232 Light Pen Cable MLPN 54 54000B N 9 pin D type female connector to the PC Pn Function 1 Shield Ground 9 Pin D Type Connector KH 7 MOM EM USB Cable MLPN 52 52828A USB A Type Connector 40 CRADLE AND CABLE TERMINATIONS CONTINUED Full Speed USB Cable with power from Register MLPN 54 54073A Full Speed USB Cable with external Power Supply MLPN 54 54200A N D OO OD a 4 USB A Plus Power Type Connector 0000 USB A Plus Power Type Connector 41 CRADLE AND CABLE TERMINATIONS CONTINUED Cable Connector Configuration The Keyboard Wedge cable MLPN 57 57002A is terminated with a 5 pin DIN female connector on one end and a 6 pin mini DIN male on the other Keyboard Wedge Cable 5 Pin DIN Female 6 Pin DIN Male Metrologic will supply an adapter cable with a 5 pin DIN male connector on one end and a 6 pin mini DIN female connector on the other Adapter Cable 5 Pin DIN Male 6 pin Mini DIN Female Accor
3. 5 811 780 5 825 012 9 828 048 5 883 375 5 886 337 5 895 907 5 925 870 5 925 871 5 939 698 6 029 894 D408 532 No license right or sublicense is granted either expressly or by implication estoppel or otherwise under any METROLOGIC or third party intellectual property rights whether or not such third party rights are licensed to METROLOGIC including any third party patent listed above except for an implied license only for the normal intended use of the specific equipment circuits and devices represented by or contained in the METROLOGIC products that are physically transferred to the user and only to the extent of METROLOGIC s license rights and subject to any conditions covenants and restrictions therein Other worldwide patents are currently pending 48 INDEK A AC Input Outlet 5 6 7 8 9 10 accessories ccccececcccecececececececenecs 2 ACceseorles 2 adapter esse 2 ADDIOVAIS anaa a 23 Audible ra o 17 Autodiscriminates 32 B Barcos cities 17 23 Bar Code 4 17 18 19 21 23 24 29 30 32 Beep 4 17 18 28 29 32 34 C CAD Cece iit heat 2 Gabler 31 40 42 Communication 5 18 19 22 31 33 Pin Assignments 42 PowerLink 2 3 5 7 8 9 10 22 42 Caution 3 5 6 7 8 9 10 13 23 44 46 Configuration 17 21 28 40 42 CONNECION ee 2 HEEN e iio oa 32 customer SerfvV Ce o asenannannnn
4. KI service center S Flashing Blue and one Razzberry Tone dy SH Flashing Blue and White with Two Razzberry Tones O P This indicates the scanner has experienced a scanning E mechanism failure Return the unit for repair to an La authorized service center ntin Razzberry Tone with all LEDs off HD Continuous Razzberry Tone with a so If upon power the scanner emits a continuous razzberry tone the scanner has experienced an electronic failure TE Return the unit for repair to an authorized service center Three Beeps on power up WA If the scanner beeps 3 times on power up then the non DDD volatile memory NovRAM that holds the scanner b configuration has failed If the scanner does not respond after reprogramming return the scanner for repair to an authorized service center N Two Razzberry Tones with Steady White CB The scanner scans a bar code without establishing CO communication first EE He The scanner reads a bar code but the cradle fails to transmit the data 20 PROGRAMMING MODES The MS9535 VoyagerBT has 2 modes of programming gt Bar Codes VoyagerBT can be configured by scanning the bar codes in the MetroSelect Single Line Programming Guide MLPN 00 02544B and Bluetooth Programming Addendum 00 02024A Please refer to these guides for instructions The MetroSelect Single Line Programming Guide can be downloaded for FREE from Metrologic s website www metrologic com gt MetroSet2
5. This user friendly Windows based configuration program allows you to simply point and click at the desired scanner options This program can be downloaded for FREE from Metrologic s website www metrologic com or set up disks can be ordered by calling 1 800 ID METRO 21 UPGRADING THE FLASH ROM FIRMWARE The MetroSet 2 program also allows the user of a Metrologic scanner to quickly upgrade to a new or custom version of software lt requires the use of a personal computer running under Windows 95 or greater and the use of a communication port The user merely connects the scanner to a communications port of the PC launches the MetroSet 2 program and blasts off to new software upgrades Each MS9535 and its cradle regardless of the version number or communication protocol can be upgraded In other words all RS232 Light Pen 41 keyboard wedge 47 USB 38 FS USB C40 FS USB D40 and IBM 468X 469X 11 units can be upgraded To upgrade all units an RS 232 cable MLPN 54 54000B N is required Before upgrading the flash ROM within the scanner communication between the scanner and the cradle must be first established The upgrades and custom software versions will be supplied by Metrologic in files called Motorola S record files These files contain all the information needed to upgrade the scanner Simply add this file to the working directory or retrieve from its current location The program guides the user with its s
6. successfully at a relatively long distance but still within the 10 meter operation range the white LED may flash after a short delay Steady Blue and Steady White After a successful scan the scanner transmits the data to the cradle If the cradle is not ready to accept the information the scanner s white LED will remain on until the data can be transmitted or until a communication time out occurs VISUAL INDICATORS CONTINUED N HE O IN Alternating Flashing of Blue and White This indicates the scanner is in program mode Two razzberry tones indicate that an invalid bar code has been scanned while in this mode If the scanner is in RangeGate active mode this indicates the SRAM of the scanner becomes full If the scanner needs to have a Flash ROM upgrade the alternating flashing of the blue and white LEDs will occur during startup and is accompanied by three beeps Steady White Blue off This indicates the laser is off and the scanner is still waiting for communication from the cradle Flashing Blue This indicates the scanner is trying to establish communication with the cradle Flashing Amber If the scanner is in cradle this indicates the scanner is being charged If the scanner is out of cradle this indicates the scanner has low battery power and needs recharging 19 FAILURE MODES This indicates the scanner has experienced a laser sub system failure Return the unit for repair to an authorized
7. to scanner Internal battery not supplying power to scanner Communication is not established between scanner and cradle The distance between scanner and cradle is beyond the 10 meter operation range Possible ROM failure Non volatile RAM failure RAM or ROM failure VLD failure Scanning mechanism failure Check transformer outlet and power strip Make sure the cable is plugged into the cradle properly Place the scanner into cradle to recharge the battery Establish communication between scanner and cradle before scanning a normal bar code Bring the scanner back into the 10 meter communication range from the cradle Flash ROM Upgrade Required Contact a Metrologic Representative if the unit will not hold the programmed configuration Contact a Metrologic Representative if the unit will not function Contact a Metrologic Representative Contact a Metrologic Representative TROUBLESHOOTING GUIDE CONTINUED a Same symbol timeout Adjust same symbol timeout for a ommunicates set too short longer time and beeps twice The unit powers up but does not EE Enable beeper Select tone tone selected scan or beep UPC EAN Code 39 interleaved 2 Scanning a particular of 5 Code 93 Code 128 and symbology that is not Codabar are enabled by default enabled Verify that the type of bar code being read has been selected The unit powers up but does not scan and or beep The scanner ha
8. Cable Connector Configurations ssnn001n1nnennsennnnnnnnnennnnnnnnnsnnnnnnnensnnnnnnene 42 KEGAN AY EE 43 NGONG EE 44 A Ka JA ee eee Sa aa a aaa 48 a 49 INTRODUCTION MS9535 VoyagerBT laser bar code scanner is a new member of Metrologic s Voyager series Besides featuring the patented technologies of automatic trigger and CodeGate the VoyagerBT has incorporated the latest Bluetooth wireless technology This technology gives the customer the freedom of mobility with scanning up to 10 meters from the cradle VoyagerBT works hand in hand with its cradle Before normal scanning the scanner must establish communications with the cradle by scanning a Bluetooth address bar code After communications have been established between the scanner and cradle futures bar code scans will be transmitted from the scanner to the cradle and from the cradle to the host The cradle of the VoyagerBT also works as a battery charger for the scanner When resting in the cradle the scanner can reach a fully charged state in 2 5 hours When fully charged the scanner can provide up to 12 000 scans For power saving the scanner can be put into a full sleep mode by depressing the CodeGate button for 5 seconds after the laser has shut down In this mode the scanner can remain powered for up to 35 hours before the batteries require recharging To wake up the scanner simply depress the CodeGate button and the scanner will resume normal operation V
9. DIN male connector on one end and a 6 pin mini DIN female connector on the other According to the termination required connect the appropriate end of the adapter cable to the main cable leaving the necessary termination exposed for connecting to the keyboard and the keyboard port on the PC 7 Connect to the main cable to the keyboard and the keyboard port on the host system 8 Power up the host system Caution To maintain compliance with applicable standards all circuits connected to the scanner must meet the requirements for SELV Safety Extra Low Voltage according to EN 60950 To maintain compliance with standard CSA C22 2 No 950 UL 1950 and norm EN 60950 the power source should meet applicable performance requirements for a limited power source USB KEYBOARD SCANNER INSTALLATION 1 Turn off the host system 2 Connect the USB B type connector into the center jack on the bottom of the charger cradle 3 Connect the plug of the power supply into the power jack on the bottom of the charger cradle 4 Connect the power supply into an AC outlet 5 Connect the USB cable to the USB port on the host system 6 Turn on the host system Caution To maintain compliance with applicable standards all circuits connected to the scanner must meet the requirements for SELV Safety Extra Low Voltage according to EN 60950 To maintain compliance with standard CSA C22 2 No 950 UL 1950 and norm EN 60950 the power source sho
10. THE PRODUCT METROLOGIC RESERVES THE RIGHT TO MAKE ANY CHANGES TO THE PRODUCT DESCRIBED HEREIN North America Headquarters Metrologic Instruments Inc Customer Service 1 800 ID METRO 90 Coles Road Tel 856 228 8100 Blackwood NJ 08012 4683 Fax 856 228 6673 Email info metrologic com Website www metrologic com China Metro Suzhou Technologies Co Ltd Tel 86 512 6257 2311070000000 221 Xinghai Street Fax 86 512 62571517 Suzhou Industrial Park Email info cn metrologic com Suzhou China 215021 43 NOTICES Notice The FCC requires that you be advised of certain requirements involving the use of this device This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This device uses and generates radio frequency energy If not installed and used in accordance with the instruction it may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the sep
11. The pairing process takes a few seconds and can be confirmed by a solid blue LED on the cradle and a solid blue LED on the scanner when the laser is activated Dynamic Pair Function The scanner can connect to any cradle by scanning the Bluetooth address code attached to that cradle This is referred as Dynamic Pair Function Each scanner will only communicate with the last cradle address scanned Once a cradle is paired with a scanner another scanner can not be paired with that cradle until the connection is broken The connection can be easily broken by placing the unit into sleep mode by holding down the CodeGate button for three 3 seconds For example Scanner 1 has established communication with Cradle 1 If you make it scan the Bluetooth address code on Cradle 2 its connection with Cradle 1 will break and switch to Cradle 2 At this time if Scanner 2 scans the Bluetooth address code on Cradle 2 again it will razz indicating that the communication cannot be established since Cradle 2 already connects to Scanner 1 RangeGate The operation range of the Bluetooth communication is 10 meters between the scanner and cradle If scans are made out of this range the communication will break and the blue LED will flash At this time RangeGate becomes active and the bar codes scanned during this communication loss will be stored in the SRAM of the scanner instead of being lost Once communication is re establishe
12. Verwendung anderer als der hier beschriebenen Steuerungen Einstellungen oder Verfahren kann eine gef hrliche Laserstrahlung hervorrufen Der Kunde sollte unter keinen Umst nden versuchen den Laser Scanner selbst zu warten Sehen Sie niemals in den Laserstrahl selbst wenn Sie glauben da der Scanner nicht aktiv ist Offnen Sie niemals den Scanner um in das Ger t hineinzusehen Wenn Sie dies tun k nnen Sie sich einer gef hrlichen Laserstrahlung aussetzen Der Einsatz optischer Ger te mit dieser Laserausr stung erh ht das Risiko einer Sehsch digung IN Attenzione L utilizzo di sistemi di controllo di regolazioni o di procedimenti diversi da quelli descritti nel presente Manuale puo provocare delle esposizioni a raggi laser rischiose cliente non deve assolutamente tentare di riparare egli stesso lo scanner laser Non guardate mai il raggio laser anche se credete che lo scanner non sia attivo Non aprite mai lo scanner per guardare dentro l apparecchio Facendolo potete esporVi ad una esposizione laser rischiosa L uso di apparecchi ottici equipaggiati con raggi laser aumenta il rischio di danni alla vista 47 PATENTS Patent Coverage The VoyagerBT METROLOGIC product may be covered by one or more of the following US Patents US Patent No 4 958 984 5 081 342 5 260 553 5 340 971 5 340 973 9 424 525 5 468 951 5 484 992 5 525 789 5 528 024 5 991 953 5 616 908 9 627 359 5 661 292 5 777 315 5 789 730 5 789 731
13. on Code 39 Scanner Space Cradle Baud Rate Rate 8 Data Bits 35 DEFAULT SETTINGS CONTINUED 977 2 digit Supplemental Requirement 36 as code 39 as code 39 as code 39 DEFAULT SETTINGS CONTINUED 100 msec to Find Supplement Programmable d 100 msec GC max 800 msec Coupon Code 128 E t Programmable Code t Code Selects with programmable Code 3 avail Length Locks Programmable Prefix rani characters Suffix characters EE Prefixes for Individual Code types Inter Scan Code delay programmable 800 usec 100 usec steps Function control Key Support Minimum Element width Programmable in 5 6 usec 1 msec steps RangeGate Enabled MTLG Challenge Charging enabled t These options are mutually exclusive One can not be used in conjunction with the other 3 CRADLE AND CABLE TERMINATIONS Cradle Pinout Connections The MS9535 cradle has 3 ports on the bottom One is for power and the other two are for interfaces connection The 10 pin RJ45 modular jack has diffent configurations for different interfaces m 10 Pin RJ45 MI9535 541 RS232 Light Pen Emulation 6 DTR Input LTPN Source 8 LTPNData DD 9 Reserved MI9535 547 Keyboard Wedge Pin Function PC Data PC Clock 6 KBCock 8 KBData 9 5VDC 0 MI9535 538 USB Keyboard RS 232 Transmit Output RS 232 Receive Input 4 RTS Output 5 CTS Input Reserved Reserved
14. system communicated properly to the host system The scanner is shipped from the factory programmed with default settings Please refer to the MetroSelect Programming Guide MLPN 00 02544B or MetroSet2 s help files for instructions on changing the scanner s configuration In addition please check that the cradle and host system are using the same communication protocol Right installation does not guarantee that the scanned information will be Caution A To maintain compliance with applicable standards all circuits connected to the scanner must meet the requirements for SELV Safety Extra Low Voltage according to EN 60950 To maintain compliance with standard CSA C22 2 No 950 UL 1950 and norm EN 60950 the power source should meet applicable performance requirements for a limited power source KEY BOARD WEDGE SCANNER INSTALLATION 1 Turn off the host system 2 Connect the 10 pin RJ45 male connector into the 10 pin modular jack on the bottom of the cradle You will hear a click when the connection is made 3 Connect the plug of the power supply into the power jack on the bottom of the cradle 4 Connect the power supply into an AC outlet The blue LED on the rear of the cradle will stay on 5 Disconnect the keyboard from the PC 6 The keyboard wedge cable is terminated with a 5 pin DIN female connector on one end and a 6 pin mini DIN male on the other Metrologic will supply an adapter cable with a 5 pin
15. 1 Spray glass cleaner onto lint free non abrasive cleaning cloth 2 Gently wipe the scanner window 23 DEPTH OF FIELD 2 5 54 mem Scan Wich at Face Distance from Face 0 0 O mer 1 0 25 4 mm E E H A 4 112 d ite er a Ar D bi 54 mm 3 4 BS mm O Kee 7 1 160 A 1 D s mm genee A Ng ng Ep 1 aT rin Rz 216 1 k e ak AO e 66 5 165 mm 9 8 249 mm 8 0 203 mrm ne erm 10 0 254 mm With of Scan Field 24 IR ACTIVATION 2 5 Bd mm Scan Mi dih at Face 4 12 6 320 min hd ee Wh of Scan Field Distance From Paca 0 0 Hmm 4 0 31 04 I mm 225 4 mm 11 0 22 0 228 mm 54 mm 25 CONNECTING TO OTHER BLUETOOTH DEVICES Other than the cradle the MS9535 VoyagerBT scanner can also link to other Bluetooth compatible devices such as a computer printer or laptop A Bluetooth communication between the scanner and the other device must be established before the system works gt 26 When MS9535 acts as Client The MS9535 is defaulted to act as client when connected to other Bluetooth devices Communication is established by scanning the Bluetooth address code of the other device a Ifthe Bluetooth address is headed with FNC3 and consists of a 12 digit hex value e g 000CA7FFFF99 scan the address bar code to establish the communication 8000CA 7 F F F F 9 9 Example Bluetooth Address With FNC3 b If
16. 2000 soans per charge recharge me 29 Radio Range 10r m n 33 ft ENVIRONMENTAL Input Voltage Power Laser Class 1 Operating 0 C to 40 32 to 104 F Storage 20 C to 50 C 4 to 1227 lt c lt lt lt l Humidity 5 to 95 relative humidity non condensing Light Levels Up to 4842 Lux 450 footcandles Shock E Designed to withstand 1 5 m 5 drops HEES _ Contaminants Sealed to resist airborne particulate contaminants _ _ Ventilation E None required 32 DEFAULT SETTINGS Many functions of the scanner and cradle can be programmeo that is enabled or disabled The scanner and cradle are shipped from the factory programmed to a set of default conditions The default parameter has an asterisk in the charts on the following pages lf an asterisk is not in the default column then the default setting is OFF or DISABLED Every communication does not support every parameter If the communication supports a parameter listed in the charts on the following pages a check mark will appear LIGHT IBM PARAMETER DEFAULT RS 232 PEN 4644 KBW USB Normal Scan Mode Continuous Scan Mode Blinky Scan Continuous Blinky Scan Custom one shot Scan Long Range In Stand Short Range In Stand Long Range Out of Stand Short Range Out of Stand CodeGate Active In Stand CodeGate Inactive In Stand CodeGate Active Out of Stand CodeGate Inact
17. 800 436 3876 2 QUICK START 1 Connect the 10 pin RJ45 male connector into the 10 pin modular jack on the bottom of the cradle You will hear a click when the connection is made 2 Connect the plug of the power supply into the power jack on the bottom of the cradle 3 Connect the power supply into an AC outlet The blue LED on the rear of the cradle will stay on F NL _A ON A Su 1 1 0 4 Pick up the scanner and scan the Bluetooth address code on the cradle you will hear 3 continuous beeps After 4 seconds both the blue LEDs of the charger cradle and the scanner flashes followed by 2 combination beeps This means the communication between the cradle and the scanner has been established successfully lt mn 8 III DT Bluetooth Address Code g d e S fff d d O d ZZ d LS This is a configuration bar code attached on the cradle Before the normal scanning you must establish a communication between the scanner and the receiver Please go to Page 8 for more details Caution To maintain compliance with applicable standards all circuits connected to the scanner must meet the requirements for SELV Safety Extra Low Voltage according to EN 60950 To maintain compliance with standard CSA C22 2 No 950 UL 1950 and norm EN 60950 the power source should meet applicable performance requirements for a limited power source QUICK START CONTINUED 9 Scan a bar code anywh
18. 955 Email info uk metrologic com Tel 7 095 730 7424 Fax 7 095 730 7425 Email info ru metrologic com Russia ASIA Singapore China Japan SOUTH AMERICA Metrologic Asia Pte Ltd No 8 Kaki Bukit Place 4 Floor Singapore 416186 Metro Suzhou Technologies Co Ltd 221 Xing Hai Street Suzhou Industrial Park Suzhou China 215021 Metrologic Japan Co Ltd Matsunoya Building 6 Floor 3 14 8 Higashiueno Taitou Ku Tokyo 110 0015 Japan Tel 65 6842 7155 Fax 65 6842 7166 Email info sg metrologic com Tel 86 512 62572511 Fax 86 512 62571517 Email info cn metrologic com Tel 81 03 3839 851 1 Fax 81 03 3839 8519 Email info jp metrologic com Brazil Outside Brazil Copyright Metrologic do Brasil Ltda Rua da Paz 2059 CEP 04713 002 Ch cara Santo Ant nio S o Paulo SP Brasil Metrologic South America Rua da Paz 2059 CEP 04713 002 Ch cara Santo Ant nio S o Paulo SP Brasil Tel 55 11 5182 8226 Fax 55 11 5182 8315 Email info br metrologic com Tel 55 11 5182 7273 Fax 55 11 5182 7198 Email info sa metrologic com 2005 by Metrologic Instruments Inc All rights reserved No part of this work may be reproduced transmitted or stored in any form or by any means without prior written consent except by reviewer who may quote brief passages in a review or provided for in the Copyright Act of 1976 Products and brand names mentioned in this document are trademarks of their
19. DLE PARTS The main parts of the cradle includes d Charge Contactor a b c d a a Blue LED gt b Wall Mount Hook y c Page Button gt Blue LED The blue LED indicates the connecting status of the cradle with the scanner When the Bluetooth connection breaks the blue LED will flash A single flash of the blue LED indicates data has been received from the scanner Wall Mount Hook In applications where wall mount becomes necessary for the cradle the hook will secure the scanner into place Page Button The page button is located at the rear of the cradle When the scanner associated with the cradle can not be found press the page button the scanner will begin beeping and the blue and amber LEDs will flash alternatively To discontinue paging the scanner press the page button again Charge Contactor The cradle supplies power to the scanner through the charge contactors When the cradle is powered up do NOT short the two charge contactors with metal objects This will result in damaging the cradle 15 SCANNER PARTS Amber LED CodeGate Button White LED Blue LED MS9535 Top View Output Window gt Ls O Plastic Feet Charge Contacts MS9535 Side View 16 AUDIBLE INDICATORS When the scanner is in operation it provides audible feedback These sounds indicate the status of the scanner Eight settings are available for the tone of the beeper normal 6 alt
20. aration between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Privacy of communications may not be ensured when using this equipment The radiated output power of this intentional wireless radio is far below the FCC radio frequency exposure limits The internal wireless radio operates within guidelines found in radio frequency safety standards and recommendations which reflect the consensus of the scientific community The level of energy omitted is far less than the electromagnetic energy emitted by wireless devices such as mobile phones However the use of wireless radios may be restricted in some situations or environments such as aboard airplanes If you are unsure of restrictions you are encouraged to ask for authorization before turning on the wireless radio Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Notice This Class A digital apparatus complies with Canadian ICES 003 IC statement The term IC before the cer
21. ay to the transmitted output 31 DESIGN SPECIFICATIONS OPERATIONAL _ Light Source Visible Laser Diode 650 nm t10 nm Laser Power 0 96 mw peak E Depth ofS en ae E nee Minimum Bar Width mS 127 mm 5 0 mi O E Autodiscriminates all standard 1D bar codes For others call a Metrologic service representative EI RS232 Light Pen PC Keyboard Wedge Stand Alone Keyboard USB keyboard and full speed IBM e Print Contrast E 35 minimum reflectance difference E Number of Characters Up tc to 80 data characters e a ASK ae e Edo IH Ral Pitch d 42 68 52 _Beeper Operation JE 7 tones or no beep Decode abani System Interfaces Indicators LED Blue laser on ready to scan White good read Default Settings Amber battery full ooo A Length 198 mm 7 8 UN Width Handle 45 mm 1 8 Head 78 mm 8 1 _Depth 40 mm a 6 d Weight Scanner 199 g 7 020z Cradle 225g 7 94 oz Scanner 5 2VDC 0 25V Cradle 5 2VDC 0 25V E Scanner Operating 1 15 W Sleep 150mW tit Grent Scanner Opetalma 230 mAO5VDC Sleep 30mMAO 5VDC Grade 120 m DC Transformers Class I 5 2V 2A IEC 60825 1 1993 A1 1997 A2 2001 EN 60825 1 1994 A11 1996 A2 2001 ec ECC ICES 003 amp EN5S5022ClassB lt FCC ICES 003 amp EN55022 Class A for FS USB IBM ere _ Recharge Time 1
22. batteries to strong impacts or shocks e Do not disassemble or modify batteries Caution Danger of explosion if batteries are incorrectly replaced Replace only with the same or equivalent type recommended by the manufacture Dispose of used batteries according to the recycle program for batteries as directed by the governing agency for the country where the batteries are to be discarded 13 RECEIVER CHARGER CRADLE The cradle of MS9535 works both as a receiver and a charger As a receiver after establishing Bluetooth communication with the scanner the cradle receives date being scanned by the scanner and transmits it to the host To communicate with different host interfaces the cradle is offered in various configurations Version Identifier Communication Protocol s Cradle MI9535 5xx 14 Full RS 232 Keyboard Wedge Stand Alone Keyboard al Wedge and RS 232 Transmit Receive MI9535 5xx MI9535 5xx 41 RS 232 Light Pen Emulation USB Keyboard and RS 232 Transmit MI9535 5xx Receive MI9535 5xx IBM and RS 232 Transmit Receive MI9535C5xx Full Speed USB with external Power Supply MI9535D5xx Full Speed USB with power from Register As a charger the cradle recharges the scanner whenever it is set into place Even if the scanner s battery is full the cradle will continue to supply power to the scamner A charger only cradle is also available with MLPN 46 46772 CRA
23. ce received including interference that may cause undesired operation Privacy of communications may not be ensured when using this equipment The radiated output power of this intentional wireless radio is far below the FCC radio frequency exposure limits The internal wireless radio operates within guidelines found in radio frequency safety standards and recommendations which reflect the consensus of the scientific community The level of energy omitted is far less than the electromagnetic energy emitted by wireless devices such as mobile phones However the use of wireless radios may be restricted in some situations or environments such as aboard airplanes If you are unsure of restrictions you are encouraged to ask for authorization before turning on the wireless radio Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Notice This Class B digital apparatus complies with Canadian ICES 003 IC statement The term IC before the certification registration number only signifies that the Industry Canada technical specifications were met Remarque Cet appareil numerique de la class B est conforme a la norme NMB 003 du Canada AN Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure Under no circumstances should the customer attempt to service the las
24. d the stored data will be transferred to the host and normal scanning will resume Inventory Mode specific to MS9535 5M For light warehousing applications Metrologic offers the MS9535 5M VoyagerBT with extended memory and a unique feature called Inventory Mode This mode allows a customer to store approximately 2500 bar codes length dependent with quantity information to facilitate inventory taking This information can then be transmitted in batch to the host by scanning a specific bar code or putting the unit back into the cradle For the bar codes associated with this mode please consult the MetroSelect programming guide 11 CHARGING THE SCANNER Prior to performing any operation with the scanner make sure it has been charged The following explains how to determine if the scanner needs recharging 1 During operation the scanner gives two beeps after a successful scan This indicates the scanner has low power 2 When a bar code is presented to the scanner and a scan line is not activated or the CodeGate button is pressed and the laser comes on for brief moment This indicates the scanner has automatically switched to normal sleep mode due to low power 3 When the CodeGate button is pressed and a scan line is not present This indicates the scanner has no power Before charging the scanner it is suggested that the communication between the scanner and the cradle be established first To charge the scanner place th
25. ding to the termination required connect the appropriate end of the adapter cable to the main cable leaving the necessary termination exposed for connecting to the keyboard and the keyboard port on the PC The pin assignments are as follows Main Cable Adapter Cable 5 pin Female DIN Pin Function 6 pin Female Mini DIN Function Keyboard Data No Connect Power Ground 5 Volts DC Keyboard Clock No Connect No Connect 42 LIMITED WARRANTY The MS9535 scanners are manufactured by Metrologic at its Suzhou China facility The MS9535 scanners have a two 2 year limited warranty from the date of manufacture Metrologic warrants and represents that all MS9535 scanners are free of all defects in material workmanship and design and have been produced and labeled in compliance with all applicable US Federal state and local laws regulations and ordinances pertaining to their production and labeling This warranty is limited to repair replacement of Product or refund of Product price at the sole discretion of Metrologic Faulty equipment must be returned to the Metrologic facility in Blackwood New Jersey USA or Puchheim Germany To do this contact Metrologic s Customer Service Repair Department to obtain a Returned Material Authorization RMA number In the event that it is determined that the equipment failure is covered under the warranty Metrologic shall as its sole option repair the Product or replac
26. e the Product with a functionally equivalent unit and return such repaired or replaced Product without charge for service or return freight whether distributor dealer reseller or retail consumer or refund an amount equal to the original purchase price This limited warranty does not extend to any Product which in the sole judgement of Metrologic has been subjected to abuse misuse neglect improper installation or accident nor any damage due to use or misuse produced from integration of the Product into any mechanical electrical or computer system The warranty is void if the case of Product is opened by anyone other than Metrologic s repair department or authorized repair centers THIS LIMITED WARRANTY EXCEPT AS TO TITLE IS IN LIEU OF ALL OTHER WARRANTIES OR GUARANTEES EITHER EXPRESS OR IMPLIED AND SPECIFICALLY EXCLUDES WITHOUT LIMITATION WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE UNDER THE UNIFORM COMMERCIAL CODE OR ARISING OUT OF CUSTOM OR CONDUCT THE RIGHTS AND REMEDIES PROVIDED HEREIN ARE EXCLUSIVE AND IN LIEU OF ANY OTHER RIGHTS OR REMEDIES IN NO EVENT SHALL METROLOGIC BE LIABLE FOR ANY INDIRECT OR CONSEQUENTIAL DAMAGES INCIDENTAL DAMAGE DAMAGES TO PERSON OR PROPERTY OR EFFECT ON BUSINESS OR PROPERTY OR OTHER DAMAGES OR EXPENSES DUE DIRECTLY OR INDIRECTLY TO THE PRODUCT EXCEPT AS STATED IN THIS WARRANTY IN NO EVENT SHALL ANY LIABILITY OF METROLOGIC EXCEED THE ACTUAL AMOUNT PAID TO METROLOGIC FOR
27. e unit into the cradle The amber LED on the scanner begins to flash indicating the charing process has begun A complete charging process takes about 2 5 hours The amber LED of the scanner will turn steady when charging is complete If charging the scanner for the first time it is suggested to keep the scanner on cradle for another 30 minutes after the amber LED turns steady Manufacturer s Suggestion If the scanner is not be used for a long period of time it is suggested that the unit be placed into normal or full sleep mode to save power For normal sleep mode scan the configuration bar codes in the Bluetooth Programming Addendum 00 02024A For full sleep mode after the laser shuts off depress the CodeGate button and hold for 3 seconds the scanner will give a long beep and switch into full sleep mode To wake up the scanner from either mode depress the CodeGate button After an automatic reset the scanner is ready for normal operation CHARGING THE SCANNER CONTINUED Safety Precautions for Lithium Batteries Do not place batteries in fire or heat the batteries Do not store batteries near fire or other high temperature locations Do not store or carry batteries together with metal objects Do not expose batteries to water or allow the batteries to get wet Do not connect short the positive and negative terminals of the batteries to each other with any metal object e Do not pierce strike or step on batteries or subject
28. er scanner Never attempt to look at the laser beam even if the scanner appears to be nonfunctional Never open the scanner in an attempt to look into the device Doing so could result in hazardous laser light exposure The use of optical instruments with the laser equipment will increase eye hazard IN Atenci n La modificaci n de los procedimientos o la utilizaci n de controles o ajustes distintos de los especificados aqu pueden provocar una luz de l ser peligrosa Bajo ninguna circunstancia el usuario deber realizar el mantenimiento del l ser del esc ner Ni intentar mirar al haz del l ser incluso cuando este no est operativo Tampoco deber abrir el esc ner para examinar el aparato El hacerlo puede conllevar una exposici n peligrosa a la luz de l ser El uso de instrumentos pticos con el equipo l ser puede incrementar el riesgo para la vista IN Attention L emploi de commandes r glages ou proc d s autres que ceux d crits ici peut entrainer de graves irradiations Le client ne doit en aucun cas essayer d entretenir lui m me le scanner ou le laser Ne regardez jamais directement le rayon laser m me si vous croyez que le scanner est inactif N ouvrez jamais le scanner pour regarder dans l appareil Ce faisant vous vous exposez a une rayonnement laser q st hazardous L emploi d appareils optiques avec cet quipement laser augmente le risque d endommagement de la vision 46 NOTICES CONTINUED N Achtung Die
29. ere within 10 meters from the cradle The scanner will beep once and flash the white LED The blue LED of the cradle will also flash once indicating that the bar code has been successfully read and transmitted Z SI lt MS9535 VoyagerBT also provides two modes of operation d Auto trigger mode When the scanner is at rest in the cradle it is in auto trigger mode While in this mode present a bar code in the scanning field and the data is automatically decoded and transmitted CodeGate mode When the scanner is removed from the cradle it is in CodeGate mode While in this mode scanned bar code data is only decoded and transmitted when the CodeGate button is pressed MS9535 is shipped from the factory programmed with default settings Refer to the MetroSelect Single Line Programming Guide MLPN 00 02544B or MetroSet 2 s help files for instructions on how to configure the scamner RS232 AND LIGHT PEN SCANNER INSTALLATION 1 Turn off the host system 2 Connect the 10 pin RJ45 male connector into the 10 pin modular jack on the bottom of the cradle You will hear a click when the connection is made 3 Connect the plug of the power supply into the power jack on the bottom of the cradle 4 Connect the power supply into an AC outlet The blue LED on the rear of the cradle will stay on 5 Connect the 9 pin D type connector of the RS232 cable to the proper COM port of the host system 6 Turn on the host
30. ernate tones and no tone To change the tones refer to the MetroSelect Single Line Programming Guide MLPN 00 02544B or MetroSet2 s help files moe OTA OCI AN One Beep After establishing communication when the scanner is put into cradle correctly the scanner will beep once When the scanner successfully reads a bar code the white LED will flash and the scanner beeps once When the scanner is set into full sleep mode by pressing the CodeGate button for 3 seconds the scanner will give a longer beep Two Beeps When the scanner has a low battery voltage it will give two beeps after a successful scan and flash the amber LED every 5 seconds When there is a Flash ROM upgrade needed the scanner will beep twice followed by alternating flashing of the blue and white LEDs If the scanner gives out two combined high and low tones and flashes blue LED this indicates the communication between scanner and cradle is broken Three Beeps When entering configuration mode the white LED will flash while the scanner simultaneously beeps three times Upon exiting configuration mode the scanner will beep three times again then the white LED will stop flashing When scanning a Bluetooth Address bar code the scanner will beep three times A few seconds later the scanner s blue LED flashes and sounds a 3 combination tone This indicates communication between the scanner and the cradle has been successfully established Whe
31. i apparecchi ottici equipaggiati con raggi laser aumenta il rischio di danni alla vista 45 NOTICES CONTINUED Notice The FCC requires that you be advised of certain requirements involving the use of this device This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This device uses and generates radio frequency energy If not installed and used in accordance with the instruction it may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interferen
32. implistic one click approach The user must first select the file Once selected and verified the file is ready to be used in the upgrade Press the button to start the upgrading Contact Metrologic for additional details 22 LABELS Each scanner has a label on the back of the unit This label has the model number date of manufacture serial number CE and caution information The following is an example of this label EVITER TOUTE EXPOSITION Lumiere laser emis par cette overture AVOID EXPOSURE Laser light is emitted from this aperture x _ aa e Measrolog s Instruments Inc Marnutaciurad by Metro Suzhou Tech Co Lid Model M59535 PGC ID RAAMLPAOS3S 5603350004 BD Address 000CA7001342 Voyager BT Made in China Augusi 2003 A 5 ATTENTION Rayonnemeni laser lora de ouverture NE PAS REGARDER FIXEMENT DANS LE FACEAU 1 0 MILLAWATT PEAR VISIBLE LASER HODE CLASS 1 LASER PRODUCT EC 806251199 At areas CAUTIOy KA Woo F ged Am A m Sw le p k Patent Information See Manual FCC and ICES 003 Information See Manual e Warranty VOID if case opened Contains no user serviceable components Complies with 21CFR 1040 10 amp 1040 11 NACH EN60825 1 1994 A11 1996 DV L CH HAH i TF OL MAINTENANCE Smudges and dirt can interfere with the proper scanning of a bar code Therefore the output window will need occasional cleaning
33. ive Out of Stand UPC EAN Code 128 H BE al Code 93 Sul Re EN l Codabar Interleaved 2 of 5 ITF 7272 MOD 10 check on ITF Code 11 Y Y X Y Code 39 i 4 Is y Y Y Y A A EM AEREA 33 DEFAULT SETTINGS CONTINUED IE Mod 43 Check on Code 39 43 Check on Code 39 Mod 43 Check on Code3a v v fv v Y Ser 9 EEE Check Digit amine EN ZU BE 2 2 d Pemgspekeg III Spaces Hubs coses Pemgspaeg pacos Hanas scanned Ec TOO TEIDE VUE UA A BEN DTS NIXDORF NCR S Before Y Y Y Y Y Same symbol rescan Y Y Y timeout 250 msecs Same symbol rescan S Y timeout 375 msecs Same symbol rescan e WA WA NA timeout 500 msecs Same symbol rescan 2 e e Y timeout 625 msecs 34 DEFAULT SETTINGS CONTINUED LIGHT IBM PARAMETER DEFAULT ES 46XX KBW ve Same symbol rescan timeout 750 msecs Same symbol rescan timeout 875 msecs Same symbol rescan timeout 1000 msecs Sa A A E Infinite Same symbol WA Y v e timeout Inter character delay 1 msecs eo able in 1 des 10 msecs steps max 255 msecs in KBW pes of scan buffers maximum romana A A P Convert UPC A to EAN 13 Transmit lead zero on y y Ss e y UPC E Transmit UPC A number system Transmit UPC A Manufacturer ID Transmit UPC A Item ID Transmit Codabar Start Stop Characters ana J A ZA A ER Transmit Mod 43 Check A SA J y digit
34. licable standards all circuits connected to the scanner must meet the requirements for SELV Safety Extra Low Voltage according to EN 60950 To maintain compliance with standard CSA C22 2 No 950 UL 1950 and norm EN 60950 the power source should meet applicable performance requirements for a limited power source FULL SPEED USB WITH POWER FROM REGISTER SCANNER INSTALLATION 1 Turn off the host system 2 Connect the 10 pin RJ45 male connector into the 10 pin modular jack on the bottom of the charger cradle You will hear a click when the connection is made 3 Connect the female DC power jack of USB cable to the center power jack on the bottom of the charger cradle 4 Connect the USB Type A plus power connector to the USB port on the host system 5 Turn on the host system Caution To maintain compliance with applicable standards all circuits connected to the scanner must meet the requirements for SELV Safety Extra Low Voltage according to EN 60950 To maintain compliance with standard CSA C22 2 No 950 UL 1950 and norm EN 60950 the power source should meet applicable performance requirements for a limited power source ESTABLISH COMMUNICATION BETWEEN SCANNER AND CRADLE Before the normal scanning starts Bluetooth communication between the scanner and cradle must be established The communication between the scanner and cradle can be established by scanning the Bluetooth address code located on the cradle
35. n using single code programming the scanner will sound a 3 combination tone a short pause followed by a high tone and a low tone This indicates a single configuration bar code has successfully configured the scamner Razzberry Tones This tone indicates a type of failure Refer to Failure Modes on page 16 17 VISUAL INDICATORS The MS9535 has three LED indicators blue white and amber located on the head of the scanner When the scanner is in operation the flashing or stationary activity of the LEDs indicates the status of the current scan and the scanner d Blue White amp Amber LEDs are off The scanner receives is not receiving power from the cradle or the inside battery The scanner is in full sleep mode Pressing the CodeGate button will wake up the scanner and the blue LED will flash Steady Amber After establishing communication when the scanner is put into the cradle and the battery has been fully charged the amber LED will remain steady If the communication is not established when the scanner is put into the cradle the amber LED will stay on after a short delay Steady Blue When the laser is active the blue LED is illuminated The blue LED will remain illuminated until the laser is deactivated Steady Blue and Single White Flash When the scanner successfully reads a bar code the white LED will flash the blue LED remains steady and the scanner will beep once If the scanner reads the bar code
36. nnnnn 2 Customer ServiCe aana 43 D Decode Capability 32 Default Settings 0000000noo000000an 5 Depth of Field 24 25 Re ENT TE eat 43 F Failure Indicator S 17 Failure Mode 17 20 G Green LED success iaa 18 28 H ME E 2 Host5 7 8 9 10 18 19 28 29 31 I Indicators AAA a a Laa b ea ai 17 AO AA 17 18 28 29 32 Input Voltage o nnnaennneennenennnn 32 Installati0N 43 44 46 lettre 32 K keyboard wecdoe 2 L Eet 23 LIGNE RO Sanaian 32 Nfs g DEN saa Sasa aaa ee 2 Light Pen 22 33 34 35 36 37 Light SOUCO oae 32 M Metric tia 22 N NOTICES ios 44 45 46 47 O Operation ccccccccnncccnnccnncccnnnonnnnons 17 49 P DAS aa aaa ee 2 AAA 5 22 30 32 38 40 42 Pin Aesignmente 42 Ol ee aaa ones boots ter 6 Power Supply sarasa aa gak E a 3 PowerLink 5 7 8 9 10 PrOgraMMIAO cis 17 21 programming guide 2 R Razzberry tone 0 17 34 Razzberry Tone 19 20 Red LED catas 17 18 29 Nepal 20 43 ANA en 43 RS 2322 31 33 34 35 36 37 38 39 40 S Specifications o0nnnnaananeneanann 32 Siana u a sa a eae 2 System Interfaces 32 T Terminallonase sus 6 TONES trato cents ee 17 20 Transformers saanane eaaa ane 32 Troubleshooting 29 30 31 V Ve
37. ntilation see e nenen 32 VISUAL oie ae a 18 19 Viele cios 32 W Warranty sia 43 VIG OW ari ire 23 50 July 2005 Printed in China 9 70 79004E
38. ology Scanner beeps at some bar codes and NOT for others of the same bar code symbology Scanner beeps at some bar codes and NOT for others of the same bar code symbology The unit scans the bar code but there is no data The unit scans but the data is not correct Alpha characters show as lower case 30 The aspect ratio of the bar code is out of tolerance The bar code may have been printed incorrectly The scanner is not configured correctly for this type of bar code The minimum symbol length setting does not work with the bar code Configuration is not correct Configuration is correct Computer is in Caps Lock mode Check print mode The type of printer could be the problem Change print settings e change to econo mode or high speed Check if it is a check digit character or border problem Check if check digits are set properly Check if the correct minimum symbol length is set Make sure the scanner is configured for the appropriate mode Make sure that the proper PC type AT PS2 or XT is selected Verify correct country code and data formatting are selected Adjust inter character delay symptom Enable Caps Lock detect setting of the scanner to detect whether the PC is operating in Caps Lock TROUBLESHOOTING GUIDE CONTINUED The unit is transmitting each character twice Everything works except for a couple of characters Power up OK and scans OK b
39. oyagerBT includes ability to decode Reduced Space Symbology RSS bar codes VoyagerBT offers checkout personnel the ability to scan bulky items without the need for unnecessary heavy lifting by customers or checkout personnel making for added convenience It can be used in applications including supermarkets hypermarkets shopping clubs retailers light warehouse and manufacturing SCANNER AND ACCESSORIES Part Description VoyagerBT Scanner MS9535 VoyagerBT Wireless Hand Held Laser Scanner Installation and User s Guide Wrist Strap Available on the Metrologic website www metrologic com OPTIONAL ACCESSORIES Part Description eo Cree Pal eg O Power Supply ee Receiver Charger Cradle Full Speed USB with power from Register 46 46881 Power Supply Ching E 46 46880 Power Supply United Kingdom lt 4646879 Power Supply Continental Europe 46 46882 A Power Supply Australia o E 46 46878 Power Supply United States E ES Power Supply Uni LEINE Keyboard Wedge Cable short Strain relief 2 AAA k a a em a TT a hic ee EE mm nn nn nn nn nn nn nn nn nn nn nn OOOO OO nn nn nun nn nun nn ES Pm A e gg 3 nn nun Ag 54 54200A N Full Speed USB Cable with External Power Supply Other items may be ordered for the specific protocol being used To order additional items contact the dealer distributor or call Metrologic s Customer Service Department at 1 800 ID METRO or 1
40. respective companies TABLE OF CONTENTS A A 1 Scanner and ACCESOO SS 2 QUES rata cta ca a 3 RS232 and Light Pen Scanner Installation 000nnnnenn00annnnnnnnennnnnnenennnnnnnnnnnnnennnne 5 Keyboard Wedge Scanner Installation ccccccooccnncnonnccnononnncnnnnnnnnnnanonnnnnnnos 6 USB Keyboard Scanner Installation nnnnnnn00aannnnnnnenannnnnnnnnnnnnnnnnnennnnnnennennnnnnene 7 IBM Scanner Installation au o rd e E 8 Full Speed USB with External Power Supply Scanner Installation 9 Full Speed USB with Power From Register Scanner Installation 10 Establish Communication Between Scanner and Cradle ccccccocccncccconccnncnnno 11 EE leg Haler Te E 12 Receiver Charger Cradle crsnserrirnrer aT oiia 14 e EE 15 Came e AAN Bak NAN Sk A 16 Audibie eelere 17 VEER ae erte 18 BUI lee ae ae ee Dee ia deals 20 Programming Modes ir ee ee ren 21 Upgrading the Flash ROM Firmware oaa0nnnnnnennnnnnennnnnnnnnnnnnnnnnnnnnnnresennnnennnnnes 22 Lape eee sects A e o POE A tena dee a aa naa aa en a NG a a er 23 Maintenance e BAR AA tomes 23 DEBIN OL FIE denen een na 24 Jet e e WEE 25 Connecting to other Bluetooth Devices nsennennnnnnennsennnnnnnnsennnnrnenssnsnnnnnenee 26 Trouble SHOOUMG GUJE iia eric 28 Design Specitica ON Sata 32 Deraul SEN GS ces idiota A ng doit ege dee E 33 Cradle and Cable Terminations Cradle PiNOUR GONNEGIONS ur Ba a A ANG al 38
41. retenir lui m me le scanner ou le laser Ne regardez jamais directement le rayon laser m me si vous croyez que le scanner est inactif N ouvrez jamais le scanner pour regarder dans l appareil Ce faisant vous vous exposez a une rayonnement laser q st hazardous L emploi d appareils optiques avec cet quipement laser augmente le risque d endommagement de la vision 44 NOTICES CONTINUED N Achtung Die Verwendung anderer als der hier beschriebenen Steuerungen Einstellungen oder Verfahren kann eine gef hrliche Laserstrahlung hervorrufen Der Kunde sollte unter keinen Umst nden versuchen den Laser Scanner selbst zu warten Sehen Sie niemals in den Laserstrahl selbst wenn Sie glauben da der Scanner nicht aktiv ist Offnen Sie niemals den Scanner um in das Ger t hineinzusehen Wenn Sie dies tun k nnen Sie sich einer gef hrlichen Laserstrahlung aussetzen Der Einsatz optischer Ger te mit dieser Laserausr stung erh ht das Risiko einer Sehsch digung IN Attenzione L utilizzo di sistemi di controllo di regolazioni o di procedimenti diversi da quelli descritti nel presente Manuale puo provocare delle esposizioni a raggi laser rischiose cliente non deve assolutamente tentare di riparare egli stesso lo scanner laser Non guardate mai il raggio laser anche se credete che lo scanner non sia attivo Non aprite mai lo scanner per guardare dentro l apparecchio Facendolo potete esporVi ad una esposizione laser rischiosa L uso d
42. s been programmed for The unit powers a character length up but does not lock or a minimum scan and or length and bar code beep being scanned does not satisfy the programmed criteria Verify that the bar code that is being scanned falls into the criteria Typical of Non UPC EAN codes The scanner defaults to a minimum of 3 character bar code The unit scans The scanner is If the scanner is setup to support a bar code but configured to support ACK NAK RTS CTS XON XOFF locks up after some form of host i l i or D E verify that the host cable the first scan handshaking but is and host are supporting the white LED stays not receiving the handshaking properly on signal The unit scans but the data transmitted to the host is incorrect Verify that the scanner s data format matches that required by the host Most sure that the scanner is connected to the proper host port The scanner s data format does not match the host system requirements Scanner beeps at some bar codes and NOT for others of the same bar code symbology Check print mode The type of printer could be the problem Change print settings e change to econo mode or high speed The print quality of the bar code is suspect 29 TROUBLESHOOTING GUIDE CONTINUED Scanner beeps at some bar codes and NOT for others of the same bar code symbology Scanner beeps at some bar codes and NOT for others of the same bar code symb
43. the Bluetooth address is NOT headed with FNC3 but is just a common 12 digit hex value e g 000CA7000118 scan the Get Bluetooth Address code first and then scan the address bar code 3 000CATFFRFFE FF Get Bluetooth Address 000CA700011 8 Example Bluetooth Address Without FNC3 CONNECTING WITH OTHER BLUETOOTH DEVICE CONTINUED gt When MS9535 acts as Server To enable the MS9535 to act as a server and to be discovered by another Bluetooth device scan the below Provide Service code This will allow other Bluetooth devices to send inquiries to the scanner and attempt communication Use this bar code to establish communication directly with a Bluetooth enabled device bypassing the cradle 3 000CA7000000 Provide service to other Bluetooth devices 27 TROUBLESHOOTING GUIDE The following guide is for reference purposes only Contacta Metrologic representative at 1 800 ID Metro or 1 800 436 3876 to preserve the limited warranty terms No LEDs beep or laser Scanner in Cradle No LEDs beep or laser Scanner out of Cradle Scanner s white LED locks up after first scan and razz twice Scanner scans but white LED locks up at one scan and razz twice 2 Beeps with alternately flashing LEDs on Power up 3 Beeps on power up Continuous razz tone on power up Razz tone and blue LED flash at power up Razz tone blue and white LEDs flash at power Up No power is being supplied from cradle
44. tification registration number only signifies that the Industry Canada technical specifications were met Remarque Cet appareil numerique de la class A est conforme a la norme NMB 003 du Canada AN Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure Under no circumstances should the customer attempt to service the laser scanner Never attempt to look at the laser beam even if the scanner appears to be nonfunctional Never open the scanner in an attempt to look into the device Doing so could result in hazardous laser light exposure The use of optical instruments with the laser equipment will increase eye hazard IN Atenci n La modificaci n de los procedimientos o la utilizaci n de controles o ajustes distintos de los especificados aqu pueden provocar una luz de l ser peligrosa Bajo ninguna circunstancia el usuario deber realizar el mantenimiento del l ser del esc ner Ni intentar mirar al haz del l ser incluso cuando este no est operativo Tampoco deber abrir el esc ner para examinar el aparato El hacerlo puede conllevar una exposici n peligrosa a la luz de l ser El uso de instrumentos pticos con el equipo l ser puede incrementar el riesgo para la vista IN Attention L emploi de commandes r glages ou proc d s autres que ceux d crits ici peut entrainer de graves irradiations Le client ne doit en aucun cas essayer d ent
45. uld meet applicable performance requirements for a limited power source IBM SCANNER INSTALLATION 1 Turn off the host system 2 Connect the 10 pin RJ45 male connector into the 10 pin modular jack on the bottom of the cradle You will hear a click when the connection is made 3 Connect the plug of the power supply into the power jack on the bottom of the charger cradle 4 Connect the power supply into an AC outlet 5 Connect the IBM connector to the IBM port on the host system 6 Turn on the host system it 1 Caution To maintain compliance with applicable standards all circuits connected to the scanner must meet the requirements for SELV Safety Extra Low Voltage according to EN 60950 To maintain compliance with standard CSA C22 2 No 950 UL 1950 and norm EN 60950 the power source should meet applicable performance requirements for a limited power source FULL SPEED USB WITH EXTERNAL POWER SUPPLY SCANNER INSTALLATION 1 Turn off the host system 2 Connect the 10 pin RJ45 male connector into the 10 pin modular jack on the bottom of the charger cradle You will hear a click when the connection is made 3 Connect the plug of the power supply into the power jack on the bottom of the charger cradle 4 Connect the power supply into an AC outlet 5 Connect the USB connector to the USB port on the host system 6 Turn on the host system Caution To maintain compliance with app
46. ut does not communicate properly to the host Power up OK and scans OK but does not communicate properly to the host Power up OK and scans OK but does not communicate properly to the host The host is receiving data but the data does not look correct Characters are being dropped Configuration is not correct These characters Increase interscan code delay setting Adjust whether the FO break is transmitted It may be necessary to try this in both settings may not be supported Try operating the scanner in Alt by that country s key look up table Com port at the host is not working or configured properly Cable not connected to the proper com port Cable not connected to the proper com port The cradle and host may not be configured for the same interface parameters Inter character delay needs to be added to the transmitted output Check to make sure that the baud rate and parity of the scanner and the communication port match and the program is looking for RS 232 data Check to make sure that the baud rate and parity of the scanner and the communication port match and the program is looking for RS 232 data Check to make sure that the baud rate and parity of the scanner and the communication port match and the program is looking for RS 232 data Check that the cradle and the host are configured for the same interface parameters Add some inter character del
Download Pdf Manuals
Related Search