INSTALLATION MANUAL XH - NGI Hygienic Leveling Systems
Contents
1. INSTALLATION MANUAL XH Oa Ob 1a 1b NGI HYGIENIC LEVELLING SYSTEMS PATE INSTALLATION OF XH FOOT ASSEMBLY Prior to installation of the foot ensure that the incline of the floor area intended to support the foot pad does not exceed 10 degrees relative to horisontal Assure that the foot pad will not span over cracks grout lines or other floor imperfections when mounted If unavoidable the cavity between the load bearing foot and the floor must be sealed with injecting bonding material under and around the edge of the load bearing foot Lift Jack up the machine for free access to mount foot assembly Ensure that sealing is correctly mounted on top of the sleeve Grease external thread with FoodLube Universal Grease Make sure to remove any excess of grease from external surfaces after installation Mount the machine foot on the machine and use a wrench to adjust the vertical position Make sure not to exceed the max adjustable height and that the length of engagement is correct Complete step O 2 for all feet supporting the machine Lower the machine so that the feet rest on the floor Perform final height adjustment if needed and ensure that the load is uniformly distributed on all feet Use a wrench to rotate and tighten the sleeve up against the bottom of the machine or component for which the foot is used Make sure that the sleeve is properly tightened to secure the foot assembly and to prev2. ent dirt from accessing the thread NB If the sleeve does not cover the thread the leg is not correctly installed and will neither meet hygienic guidelines nor load specifications cheoe This guideline describes how to install the XH foot assembly Cak wo onto the machine or component for which it is intended to cai support 88 00 USDA N NGI A S Virkelyst 5 DK 9400 N rresundby Denmark 45 9817 4500 amp ngi ngi dk B www ngi dk BEST PRACTICES POSITIONING OF LEGS UNDER MACHINE For the optimal positioning of the machine the machine feet must be positioned in accordance with a few guidelines NGI HYGIENIC LEVELLING SYSTEMS Level The machine must be level V Even load If the mashine is not even weight the machine feet will prefebly be placed acordingly so that the weight is evened out Leveling For a stabile result the machine feet should be adjusted justeret med lige meget sp nding i hver fod Sloping floor For a stabile result the maximum slope of the flore may not excide the recommendations for the specific foot Max slope agg Max slope NGI A S Virkelyst 5 DK 9400 N rresundby Denmark 45 9817 4500 amp ngi ngi dk H www ngi dk
Download Pdf Manuals
Related Search