Agio Umbrella Stand Assembly Instruction
Contents
1. IMPORTANT PLEASE READ ENTIRE INSTRUCTION SHEET BEFORE ASSEMBLY Step 1 Identify all parts packed in the carton against the parts list Remove all protective materials Set the parts on a flat non abrasive surface If you are missing any parts or are unsure as to how to proceed with assembly please contact our Customer Service Center immediately at 1 800 416 3511 Do not attempt to assemble if any parts are missing or damaged Step 2 Gently insert the extension pole into the base Using the bolts provided gently guide them through the bottom of the umbrella base and into the holes that are pre drilled in the extension pole Check the bolts to ensure they are aligned properly Using the hex bolt driver provided tighten each bolt a few revolution at a time until they are fully tightened Do not over tighten Over tightening could strip the bolts Step 3 Your umbrella base is now ready for use Carefully guide the Page2 umbrella pole through the hole in the center of the table and if applicable through the hole in the table connector ring and then into the base Using the screw already in place in the extension pole turn until your umbrella pole is secure in the extension pole Caution Although you have an umbrella base we highly recommend you remove your umbrella from its base and the table when not in use Even when closed strong winds could open the umbrella and damage the umbrella or the table PARTS LIST DESC2. RIPTION QTY PCS BASE 1 EXTENSION POLE l mm BOLT 3 HEX BOLT DRIVER 1 MODEL 477
Download Pdf Manuals
Related Search