Bingo User Guide
Contents
1. e Fasten the mechanical stop fixing the bolt using a 13 mm spanner Close the swing as much as possible and position the mechanical stop no 2 in contact with the female screw Fasten the mechanical stop fixing the bolt using a 13 mm spanner Te Sy 4 SN L 29 42. EN 12978 as well as any local rule in force Also the automation upstream electric system shall comply with the laws and rules in force and be carried out workmanlike The door thrust force adjustment shall be measured by means of a proper tool and adjusted according to the max limits which EN 12453 allows e We recommend to make use of an emergency button to be installed by the automation connected to the control unit STOP input so that the gate may be immediately stopped in case of danger The appliance is not to be used by children or persons with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction Children being supervised do not play with the appliance which be consulted at the Tollowing web site www v2home com DECLARATION OF CONFORMITY The following statement is applicable only if the below listed equipments are employed in accordance with the purpose indica ted in the instruction manual m 2 O c 7 Company Contact person V2 SPA Cosimo De Falco Corso Principi di Piemonte 65 Chief Executive Officer 12035 RACCONIGI ITALY Tel 39 01 72 82 10 11 Fax 39 01 72 82 10 50 V2 SPA declares that the series of BINGO actuators are in conformity with the provisions of the following EC directives 73 23 EEC low voltage directive 89 366 CEE electromagnetic compatibility directive 98 37 EEC machine
3. V2 S p A Corso Principi di Piemonte 65 67 12035 RACCONIGI CN ITALY IL n tel 39 01 72 81 24 11 fax 39 01 72 84 050 EDIZ A info v2home com www v2home com Bingo ATTUATORE ELETTROMIECCANICO IRREVERSIBILE PER CANCELLI A BATTENTE IRREVERSIBLE ELECTROMECHANICAL ACTUATOR FOR SWING GATES OPERATEUR ELECTROMIECANIQUE IRREVERSIBLE POUR PORTAILS BATTANTS OPERADOR ELECTROMIEC NICO IRREVERSIBLE PARA CANCELAS BATIENTES ACTUADOR ELECTROMIEC NICO IRREVERS VEL PARA PORT ES DE BATENTE NICHT UMKEHRBARER ELEKTROMECHANISCHER ANTRIEB F R FL GELTORE ELEKTROMECHANISCHE ONOMIKEERBARE LINEAIRE MOTOR VOOR HEKKEN MIET VLEUGELS 2 124 mm 938 mm Bingo 400 1058 mm Bingo 500 1 mm Bingo 400 476 mm Bingo 500 830 mm Bingo 400 950 mm Bingo 500 93 mm 7mm Hip 034 5 mm L4 222222224 412 mm gt g 12 5 mm E 145 mm 2 25 mm 50 gt ii NN 50 20 M 140 gt MNT NEU NO AGRUM NEE SS ea a aae at the number 39 0172 812411 operating Monday to Friday from 8 30 to 12 30 and from 14 00 to 18 00 V2 has the right to modify the product without previous notice it also declines any responsibility to damage or injury to people or thi
4. ax leaf lenght 3 5 3 5 4 5 4 5 3 5 4 5 Max leaf weight 400 400 500 500 350 400 Power supply 230 50 120 60 230 50 120 60 24 VDC 24 VDC Idling current 2 4 2 4 1 8 Full load current 3 2 6 32 6 5 Maximum Power Capacitor Max travel 370 Operating speed 0 010 0 018 Maximum thrust 1800 1800 Working temperature 30 60 30 60 Protection 34 34 Working cycle 80 80 Motor weight INSTALLATION LAYOUT 11 12 M 9 BINGO actuator cable 4 x 1 mm Blinker cable 2 x 1 5 mm cable RG 58 Key or digital selector cable 3 x 0 5 mm Q Safety edge EN 12978 II Q Internal photocells 5 cable 4 x 0 5 mm RX cable 2 x 0 5 mm TX cable 4 x 0 5 mm RX External photocells cable 2 x 1 0 5 mm TX Control unit cable 3 x 1 5 mm IS ME INR SUMMUM Rer m CEA SiC sc NUR TUN NUS alk rie a ee a eee S UN OE NER both ad to ensure the best automation performance the measurement levels shown in the following table shall be complied with Change the gate structure to adapt it to one of the cases in the table if ne
5. cessary A WARNING In the case of leaf longer than 2 5 metres an electric lock must be fitted to ensure an efficent closig A WARNING In order to avoid contatcts of the operator against the shutter it is necessary to keep as much exactly as possible the height D taking into consideration a margin between 0 and 5mm BINGO400 B mm C mm m 2 O 7 ENGLISH eet Bie ad a a i MR Moar ER ON Ma SE Se A A MT previous page mark them on the pillars and continue as follows Fix brackets on the pillars and on the gate Close the swing Unlock the actuators Position BINGO on the brackets and fix the pin no 1 with self locking nut see the picture Insert the ring nut 2 paying attention to the side of the entrance Make that the hole for the fastening of the screw n 4 is on the lower side 500 mm side would be very difficult because of the conicity of the hole and the bush 3 An over forcing may cause the damage of some components Once inserted correctly the ring nut 2 fix it on the bush 3 using the screw 4 with its self blocking nut Close the self blocking nut before hand moving the leaves Try more times to hand open and close the leave
6. directive Note Declares that the above mentioned devices may not be operated until the machine automated gate is identified CE labeled and declared to be compliant to the specifications of Directive 89 392 EEC and following modifications The person in charge for the machine start up must provide the following records Technical specification paper Declaration of conformity CF labeling Testing record Maintenance record Operation manual and directions fof fle PREPARATORY STEPS The new series of actuadors BINGO has been devised to serve gates up to 500 Kg with leaf up to 4 5 meters wide look at the table technical data Before proceeding with the installation please make sure that your gate opens and closes freely and that Racconigi 20 10 2009 V2 SPA legal representative Cosimo De Falco Hinges and pins are in optimum condition and properly greased No obstacles are within the moving area e There is no friction with the ground or between the leaves Your gate is equipped with a central latch ENGLISH BINGO400 BINGO500 BINGO400 120V BINGO500 120V BINGO400 24V BINGO500 24V Opening and closing mechanical stop BINGO400 02 BINGO500 02 BINGO400 BINGO400 02 BINGO400 120V Opening and closing mechanical stop Opening and closing electrical limit switch Built in trigger capacitor BINGO500 BINGO500 02 BINGO500 120V BINGO400 24V BINGO500 24V M
7. ngs caused by improper use or wrong installation A Please read this instruction manual very carefully before installing and programming your control unit This instruction manual is only for qualified technicians who specialize in installations and automations The contents of this instruction manual do not concern the end user Every programming and or every maintenance service should be done only by qualified technicians AUTOMATION MUST BE IMPLEMENTED IN COMPLIANCE WITH THE EUROPEAN REGULATIONS IN FORCE EN 60204 1 Machinery safety electrical equipment of machines part 1 general rules EN 12445 Safe use of automated locking devices test methods EN 12453 Safe use of automated locking devices requirements The installer must provide for a device es magnetotermical switch ensuring the omnipolar sectioning of the equipment from the power supply The standards require a separation of the contacts of at least 3 mm in each pole EN 60335 1 The plastic case has an IP55 insulation to connect flexible or rigid pipes use pipefittings having the same insulation level e Installation requires mechanical and electrical skills therefore it shall be carried out by qualified personnel only who can issue the Compliance Certificate concerning the whole installation Machine Directive 98 37 EEC Annex IIA The automated vehicular gates shall comply with the following rules EN 12453 EN 12445
8. s checking that there are no frictions between the actuator and the structure of the gate Versions WITHOUT electric limit switch To adjust the limit switch please do as follows Open the swing as much as possible and position the mechanical stop no 1 in contact with the female screw Fasten the mechanical stop fixing the bolt using a 13 mm spanner Move the leave in closing position then position the mechanical stop 2 next to the nut keep a distance of at least 5 mm A PLEASE NOTE Stop No 2 must only be used for installations with no closure stop or to intervene as a result of over running under emergency conditions Where the door has a mechanical stop avoid setting stop No 2 at the female screw end stop when the gate is closing The female screw could seize in such a way as to make it very difficult to release the Bingo Fasten the mechanical stop fixing the bolt using a 13 mm spanner Versions WITH electric limit switch As regards models equipped with electrical limit switches the female screw stops 5mm before the mechanical stop the electrical limit switch already wired inside the motor interrupts the motor power supply to avoid unusefull stress and overheatings To adjust the limit switch please do as follows Open the swing as much as possible and position the mechanical stop no 1 in contact with the female screw m 2 O c 7
Download Pdf Manuals
Related Search