Home

Shure WA502 User Guide

1. SHURE WA502 DUAL RACK The Shure WA502 Dual Rack Mount Kit is a half rack mounting assembly that is compatible with the HR standard A single WA502 kit can be used to mount an SC4 or LX4 receiver next to other 3 equipment compatible with the HR for mat Two WA502 kits can be used to mount two SC4 receivers side by side 4 USING TWO WAS502 KITS TO LINK TWO RECEIVERS 1 Remove and save the screws from the sides of each receiver as shown in Figure 1 FIGURE 1 2 Place the link bar from one WA502 kit over the holes on the left side of one receiver Then place the link bar 1 from the second WA502 kit over the holes on the right side of the other re 2 ceiver See Figure 2 below Secure the link bars with two of the screws removed from the receiver in Step 1 NOTE The threaded hole in the link bar on the left receiver should be THREADED HOLES Model WA502 User Guide MOUNT KIT positioned toward the rear The threaded hole in the link bar on the right receiver should be positioned toward the front Place the receivers next to each oth er so that the holes in the link bars line up See Figure 2 Insert one of the supplied small screws into the threaded hole on the top link bar Insert another supplied screw into the threaded hole on the bottom link bar See Figure 2 Secure the supplied brackets to the ends of the joined receivers using the remaining screw
2. s removed in Step 1 See Figure 2 INSTALLING TWO LINKED RECEIVERS INTO A RACK Insert the linked receivers into the equipment rack Secure the brackets to the rack with the supplied screws See Figure 2 NOTE For more information on rack mounting call Shure Customer Ser vice at 1 800 25 SHURE Outside the U S A call 847 600 2000 Tanna T hae xo p SC4 RECEIVER 1 SC4 RECEIVER 2 lt TOPVIEW eat TOP VIEW gt lt FRONT Pa FRONT TOX az gt i a BRACKET 1S soy ae 9mm SUPPLIED RACK EQUIPMENT 2 LINK BARS MOUNT SCREWS 2 RACK FIGURE 2 2002 Shure Incorporated 27B8404 Rev 3 Printed in U S A

Shure WA502 User Guide

Contents

Download Pdf Manuals

Related Search

Related Contents