Operating Instructions - York Survey Supply Centre
Contents
1. Survey Supply ITN USB Video Borescope Nothing else measures up Prospect House George Cayley Drive Clifton Moor York England YO30 4XE Code 28235 Tel 44 0 1904 692723 Fax 44 0 1904 690385 E Mail sales yorksurvey co uk Operating YorkSurvey o MyorkSurvey s Instructions Ref operat98 instructions 15 28235 qxp 05 01 15 York Survey Supply Centre 2015 USB Video Borescope GENERAL SAFETY INFORMATION WARNING Read and understand all instructions Failure to follow all instructions listed below may result in electric shock fire and or serious personal injury SAVE THESE INSTRUCTIONS e Prevent object and liquid entry Never spill liquid of any kind on the video display unit Liquid increases the risk of electrical shock and damage to the product e The unit is not shock resistant Do not use as a hammer and avoid high impact resultant from things such as dropping the unit from height e Do not immerse camera handle or LCD screen in water Avoid moisture and store product in a dry place Such measures reduce the risk of electric shock and damage The lens and the tube are water resistant when the unit is fully assembled but the LCD screen and handle are not e Do not use the camera if condensation forms inside the lens Let the water evaporate before using again e Turn off the system if it is not in use e Attention should be given to the environmental aspects of battery disposal e Re2. Once properly aligned twist the threaded knob clockwise until the connection is securely in place Repeat this process to connect the other end of the extension tube to the flexible camera tube Si To Install Accessories The three 3 included accessories mirror hook and magnet are all attached to the camera in the same way as illustrated below To Insert SD Card After SD card is inserted into SD card slot successfully an SD card icon will appear on the monitor screen otherwise the no SD card icon will show NOTE If the device fails to read the TF card due to late insertion or some problem of the TF card the screen displays FORMAT TF CARD If the TF card is in normal condition press Ok otherwise press YES to format the TF card To Connect USB Cable Use the provided USB cable to connect the monitor to any PC with a USB slot Your computer should automatically recognise the new hardware which you may browse by double clicking on the My Computer icon on your desktop and then navigating into the Mobile Disk directory Video Output Insert video cable into the video out socket of the monitor insert the other end of the cable into the video in jack of any compatible TV or display device The LCD monitor is now capable of outputting high quality video to another display OPERATION Switch on Camera 1 Press and hold on the power switch for about 3 seconds to turn on the camera the power indicat
3. supports up to 32GB micro SD card e Adjustable brightness on lens mounted LED light e 3 useful accessories included hook mirror and magnet e Lightweight handheld design flexible and convenient to use PACKING LIST Cry f LRASSG P l E p r al Min Sman Vieueroroe LED Lara Hont x t Magret a AWe Mubber gx STRUCTURE Thee Prog _ _ _ ____ ___ Reseed Vice t Pimy Gack ea Door TELCO Monon Paiste Flies iaioo lens Fian in Pirs Savieoh Peeing Tlie OK 1 b UER Mert Le p a hionn AD Cae Sior ea ren Du Dosan Incicmcor 4 a Piri mm WWaroccoF INSTALLATION To Install Batteries Dry your hands before installation or replacing batteries 1 Remove battery cover 2 Insert four 4 AA batteries into their appropriate slots with proper orientation as indicated on the battery compartment 3 Replace battery cover Ref operat98 instructions 15 28235 qxp 05 01 15 To Attach Flexible Tube with Handle To connect the flexible tube camera with PENETER IE EEEE control handle first make sure that the _ keyed end of the tube is aligned with the slot in the handle then use slight force to push them together Once properly aligned twist the threaded knob clockwise until the connection is securely in place To Install Extension Tube To connect the extension tube first align the keyed end with the slot in the handle Use slight force to push them together
4. eleting Folder Deleting a folder is done in the same way as deleting a single file How to Enter the Setting Mode SYSTEM SETTING In real time monitoring mode press the MENU button i Ta Ll Mi b gie mm uf 45H e a Language Setting Language 1 In the setting mode press the lt or button to select SYSTEM SETTING and then press OK button 2 Press the or button to select Language and then press OK button the following interface will appear spang um ccm en Ei English rie as 3 Press the or button to select your desired language 4 Press OK button to confirm and press MENU button to exit Video System Setting 1 In the setting mode press the 4 or p button to select SYSTEM SETTING and then press OK button 2 Press the 4or gt button to select Video System and then press the OK button 3 Press the or button to toggle between NTSC and PAL Once your desired system is selected press OK button to confirm and press MENU button to exit Formatting 1 In the setting mode press the 4 or p button to select SYSTEM SETTING and then press OK button 2 Press the lt or p button to select Format and then press the OK button 3 Press the or P button to toggle between YES and NO that is to format or cancel Press OK button to co
5. he party responsible for compliance could void the user s authority to operate the equipment The graphics included in this user manual are subject to minor change without notice York Survey Supply Centre 2015
6. move the batteries when cleaning the unit e Remove the batteries before storing the unit for a long time e When necessary REPLACE ALL FOUR 4 BATTERIES in the unit with new ones not one 1 or two 2 batteries at a time e Use only the size and type of battery specified e Be sure to install the battery with the correct polarity as indicated in the battery compartment e Properly dispose of batteries Exposure to high temperatures can cause batteries to explode so do not dispose of in a fire Place tape over the terminals to prevent direct contact with other objects Some countries have regulations concerning battery disposal Please follow all applicable regulations WELCOME Congratulations on your purchase of our inspection video camera with recordable colour LCD screen the EXPLORER COMPACT Please read the user manual carefully before using this product This product is designed as a remote inspection device capable of recording video taking pictures Appropriate for use in surveying pipes or other hard to reach places equipment or furnishing installation car repair etc Features include waterproof LED lens real time recording and micro SD card storage FEATURES e Allows for easy surveying of small hard to reach places e Mini waterproof camera with 1m 3ft flexible extended tube e Manufactured and tested to IP67 waterproof standard e 2 7 TFT LCD monitor e OSD menu for operation e Video recording capability
7. nfirm and press MENU button to exit Time Stamp Setting 1 In the setting mode press the lt or p button to select RECORDER SETTING and then press OK button 2 Press the or gt button to select Time Stamp and then press the OK button 3 Press the lt orP button to toggle between on and off Once your desired selection is made press OK button to confirm and press MENU button to exit Event Playback 1 In the setting mode press the lt or B button to select EVENT PLAYBACK and then press OK button 2 Refer to the user manual instructions on Playback of Video Picture Deleting Video Picture and Deleting Folder for guidance SPECIFICATIONS CMOS 640 x 480 PAL 640 x 480 NTSC 4x AA batteries IP67 for lens tube only am Support up to 32GB Picture Type JPEG Video Type AVI Picture Video Pixels 640 x 480 5 30 frame second optional 263 x 86 x 49mm excluding flexible tube Dimensions W x D x H Approx Weight 420g 10 C to 50 C 124 F to 122 F 15 to 85 RH Operating Temperature Operating Humidity Max FCC INFORMATION This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Changes or modifications not expressly approved by t
8. nfirm and press MENU button to exit Default Setup 1 In the setting mode press the lt or button to select SYSTEM SETTING and then press OK button 2 Press the 4 or p button to select Default Setup and then press the OK button 3 Press the or button to toggle between YES and NO that is to restore default or cancel Press OK button to confirm and press MENU button to exit View Version Information 1 In the setting mode press the lt or button to select SYSTEM SETTING and then press OK button 2 Press the lt orP button to select Version and then press the OK button You will now be able to view the version details of your product Date Time Setting 1 In the setting mode press the lt 4 or button to select a DateTime Date Time and then press OK the right interface will im appear a e 2 Press OK button to select Date or Time z Press the lt 4 or p button to adjust selection Press the MENU button to confirm and exit f k Frame Rate Setting 1 In the setting mode press the lt or p button to select RECORDER SETTING and then press OK button 2 Press the lt orP button to select Frame Rate and then press the OK button 3 Press the or button to toggle between different frame rates Once you have highlighted your desired selection press OK button to co
9. or will illuminate and the LCD will become viewable 2 When in use the tube should easily manoeuvre itself into position Do not apply excessive force 3 The flexible tube can be bent into numerous shapes that may help you explore areas you otherwise thought were impossible to see 4 The accessories included with EXPLORER COMPACT can be used to retrieve small items like dropped rings or screws Zoom in Picture In real time monitoring mode press the A button to zoom in 1 0x 1 5x 2 0x 3 0x the picture lt o LEDs Brightness Control Pus The 5 levels of LED brightness can be adjusted by pressing the and P buttons in real time monitoring or recording e video mode Sener m ESD seem oa a Recording Video 1 In real time monitoring mode press the button to begin recording 2 Press again to stop recording Beatie Durty scorching eh E z F 1807 vipo top Presrcr Notice e The video will be automatically saved as an We individual file every 30 minutes j aatan l S e Memory Full appearing on the LCD screen bec aaao Tira indicates that the SD card memory is full DeTime Tee mere Taking Photos In real time monitoring mode press the El button to take a photo Notice e Memory Full appearing on the LCD screen indicates that the SD card memory is full Playback Video Picture 1 In real time monitoring mode press the P button to toggle to the video pictu
10. re folder 2 Press the lt andP buttons to select your desired folder and then press Ok button to toggle to the right interface Notice e Mark LX next to a file name indicates that the file is a video mark CH next to a file indicates that the file is a picture 3 Playback Video Press the or p button to select your desired video and then press OK button to playback Pause press the OK button once to pause press again to resume play Curran Abaci hinas Fast Forward press and hold the button until the Current Playback Mode Icon switches to gt gt Rewind press and hold the 4 button until the Current Playback Mode Icon switches to lt 4 Stop Exit press the MENU button View Pictures Press the or buttons to select your desired video press OK or MENU button to view and press again to exit Deleting Video Picture 1 In real time monitoring mode press the P button to toggle MMI 1H mie i to the video picture folder j u EH B CH 2 Press the or P button to select your desired folder and iss cn then press the OK button ism au B 3 Press the or button to select your desired file and a h t zz then press the Q button and the right interface appears 4 Press the 4 or button to toggle between KX and M that is to cancel or delete Once you have highlighted your desired selection press the OK button D
Download Pdf Manuals
Related Search