Instructions PDF
Contents
1. the black push down pull out segments located around the dial Each segment represents 15 minutes Example One segment is pushed down at number 16 The timer will switch the chosen appliance on off at 16 00 4 00pm and switch off on at 16 15 4 15pm The timer will permit up to 96 on off programmer in on one 24 hour period To select a segment to the switch on position push down the chosen segment by using a ballpoint pen small screwdriver or other similar implement To de select a segment pull out To Operate Setting the timer to the desired on off programmer Set the switch located on the side of the timer to clock for timer operation Ensure the current time is set correctly on the timer dial Note Set the switch on the other position to bypass timer operation and use appliances as normal PARAMETER Rated Voltage 250V AC 50Hz Rated Current 16Amp 3600W Operating temperature 25 to 55 C Degree of Protection IP44 Accuracy 6 minute per day DO NOT OVERLOAD2. Instructions item no 791242 Please read the following instruction carefully before using the product WARNING Don t plug in socket outlet an appliance where the load exceeds 16Amp always ensure the plug of any appliance is fully inserted into the socket outlet Don t immerse the product in water or any other liquid Douse this product vertically do not allow the direction of the socket outlet to move towards the sky or incline Install the socket outlet away from heating emitting appliance Don t install the socket outlet where excessive moisture is present Don t plug extension cord into the socket outlet Plug the socket outlet into a three wire grounded outlet only Socket outlet is rewirable only use cord HO7RN F3G1 5mm2 Don t plug in series Don t use covered CONCRETE OPERATION INSTRUCTION First take off the rubber cap and then choose the suitable position to insert it into earth vertically and firmly Insert the plug of this product into the socket that can be connected Insert the grass cutter or other electronic appliance in the socket of the product press the switch or appliance it can work INSTRUCTION OF TIMER TO Set the Time Rotate the dial clockwise until the current time is lined up with the arrow on the dial face The hours are marked around the edge of the dial in 24 Hour format Each maker between the hour numbers represent 15 minutes TO Set the Timer The timer is triggered by
Download Pdf Manuals
Related Search