User Manual - Samsung Techwin UK
Contents
1. is open or closed more than 25 mm or 30 mm m However the effective range may be reduced by up to 50 depending on the magnetic substance iron door n this case use the Spacer to adjust the work range Install the sensor housing in parallel with the magnet housing f you install the housings vertically the sensor will not operate at all Sensor Sensor E Magnet Magnet O CX English _5 20 25mm 20572001 lt Installing on the door gt lt Installing on the window gt 4 If you inevitably use the Spacer because of the door structure ensure that you fix it to the door using proper length screws i e Installation SIM 0002 To install the sensor and magnet housings 1 Remove the cover from each housing as shown 2 Drill a hole and use the screws to fix the housing for wooden materials use screws only Drill a 2 5mm hole and use the 3mm screws You can use screws in sizes of up to 4mm for this purpose e Wiring One strand 0 65mm 0 9mm Multi strand 0 5mm 0 75mm e Use the manual screwdriver when tightening the screws e The maximum allowable torque for clamping is 10kgf cm 3 Connect the cables as necessary m Use the manual screwdriver when connecting the cables 4 Close the cover 5 Repeat the same procedure above for the magnet housing English2. ASS I construction shall be connected to a MAINS socket outlet with a protective earthing connection Battery Batteries battery pack or batteries installed shall not be exposed to excessive heat such as sunshine fire or the like Disconnection Device Disconnect the main plug from the apparatus if it s defected And please call a repair man in your location English _2 When used outside of the U S it may be used HAR code with fittings of an approved agency is employed CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so Please read the following recommend safety precautions carefully Do not Place th Do not install on a surface where it is exposed to direct sunlight near heating equipment or heavy cold Do not place thi area Do not attempt e Do not place a glass of water on the product e Don e Don e Don User s is apparatus on an uneven surface s apparatus near to service this apparatus yourself ot install near any magnetic sources ot block any ventilation openings ot place heavy items on the product Manual is a guidance book how to use the products The meaning of th e using sign in the book is following Reference in case of providing information for helping of product s
3. User Manual SIM 0001 0002 Important Safety Instructions Read these instructions Keep these instructions Heed all wamings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat reaisters stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus PNOato nN 11 Only use attachments accessories specified by the manufacturer ce 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used Use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lighting storms or when unused for long periods of time a 14 Refer all servicing to qualifie
4. _6 To install the spacer Plastic Spacer Fixing Screw 1 Pile up the Spacer as many as necessary to fit the hole 2 Placethe spacers in order from the top of the switch or the magnet housing G i b bb a and fix them using screws f m Select a proper length screw according to the number of Spacer used not included p Pb G Switch or Magnet Housing Specifications amp Appearance Specifications Item Description Model SIM 0001 SIM 0002 PULL IN 30mm or higher DROP OUT 60mm or lower Contact Point Capacity 10W Temperature 20C 50 C Weight 429 28g English _7 Appearance Unit mm SIM 0001 o fo 8 sme TR O O 14 14 SIM 0002 Sensor Housing I Magnet Housing 50 19 2 pt z English _8 SAMSUNG TECHWIN JE Correct Disposal of This Product Waste Electrical amp Electronic Equipment Applicable in the European Union and other European countries with separate collection systems This marking on the product accessories or literature indicates that the product and its electronic accessories e g charger headset USB cable should not be disposed of with other household waste at the end of their working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate these it
5. d service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped English _1 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS PROCUCT TO RAIN OR MOISTURE DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus CAUTION AN RISK OF ELECTRIC SHOCK A DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL EXPLANATION OF GRAPHICAL SYMBOLS alert the user to the presence of dangerous voltage within the product s enclosure that TAN The lightning flash with arrowhead symbol within an equilateral triangle is intended to may be of sufficient magnitude to constitute a risk of electric shock to persons presence of important operating and maintenance servicing instructions in the literature a The exclamation point within an equilateral triangle is intended to alert the user to the accompanying the product Class I construction An apparatus with CL
6. ems from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take these items for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product and its electronic accessories should not be mixed with other commercial wastes for disposal P No Z6806121101A 00
7. usages e Notice If there s any possibility to occur any damages for the goods and human caused by not following the instruction Please read this manual for the safety before using of goods and keep it in the safe place English _3 IR Sensor at a Glance SIM 0001 SIM 0002 ea 4 Sensor 3 i z Magnet ensor O le Spacer Magnet OY be I E The sensor housing has a wiring hole No wiring hole for the magnet housing Installation Instructions e This sensor will just detect the opening closing of the door or window not designed for an anti theft system or blocking unauthorized access e The point of contact capacity is low so do not operate the bell buzzer or lamp through this sensor e If the wiring distance is too long between connected receivers or sub units the sensor may be damaged due to a possible surge as the capacity distribution difference between cables So make the wiring distance in less than 250 m e Do not disassemble the sensor at your will e Do not expose the sensor to rain or moist and keep it away from a wet place e Do not put force on the sensor when installing Otherwise the inner glass tube may be damaged English _4 Installation SIM 0001 1 Attach the sensor housing on the door frame using the screws 4mm 2 Install the magnet housing on the door using the screws 4mm 3 Adjust the setting so that it will be activated when the door
Download Pdf Manuals
Related Search