BYC07H User manual - Cheap Bathroom Suites
Contents
1. and S3 buttons which will operate continuously Selecting the direct heating function e When the direct heating function is selected the settings in the Day Phase and Manual and settings are over ridden This will continually send power to the heating element and should be used when heating is needed very quickly Turning the thermostat off e You can turn the thermostat off by pressing and holding the S1 button until the OFF icon appears on screen Freeze protection function When the thermostat senses a temperature of under 5 Degrees Celsius the thermostat will enter the heating mode until the sensed temperature reaches 8 Degrees Celsius Wiring Diagram Sensor2. Weekly Programmable Heating Thermostat General Information e This intelligent thermostat can us use either manually or automatically to suit your heating needs e The time programmable function allows you to heat your home at a time convenient to you e It s automatic shutdown function can protect from overheating and help you save energy Key Functions Description e S1 On Off Button If held for more than 2 seconds Select Button If held for less than 2 seconds e S2 Down Button e S3 Up Button e S4 Switch Function Button Va WEEK Q c cc J5 Temperature Value Week A e d A d C Clock Setting Hour mg us ad LCD Display om8 8 0 00 u Oe q rs amp a Auto Mode py CHA j 2 Phase Label Manual Mode b Gy Power Lock Switch S1 On Off Switch Eoi Se l f l c Confirm De 2 S4 Function Switch 9 x oe ia urn age S2 Down Switch S3 Up Switch Operation Guide Turning On e When OFF appears at the bottom left of the screen the thermostat is being supplied with power e Press the S1 button and hold for 2 seconds until the characters appear on screen Setting the time e Press the S4 key this will make the icon flash press S1 to confirm you are attempting to set the time e You can select the da of the week the hour and minute of the day e Todo this use the up and dow
3. n S2 and S3 buttons and toggle navigate between each setting using the S4 button When you are finished press the S1 button to confirm Setting temperature for times of the day e When you have set the time the Day Phase Setting will begin The number 1 will be flashing to the right of the screen this indicates you are selecting the start time for Phase 1 You can adjust the hour and minute of the start time by using S2 and S3 and confirming with S4 e It will then prompt the setting of Phase 2 which is done in the same way You can set up to a maximum of 4 phases e If you wish not to use all 4 phases set the time of the phase to When you have finished the icon will flash Selecting the operating function e Pressing and holding the S4 button will make the icon flash continuously press S4 to toggle between the OO eX settings press S1 to confirm the operating function Selecting the automatic function e When the automatic function is selected your thermostat will heat to the temperature and times you have selected in the Day Phase Setting You can manually increase or decrease the temperatures by using the S2 and S3 button Selecting the manual function e When the manual function is selected the settings in the Day Phase Setting are over ridden You can select the current temperature with the S2
Download Pdf Manuals
Related Search