User manual Dishwasher VA6111LT
Contents
1. Plastic items that are not heat resistant Older cutlery with glued parts that are not temperature resistant Bonded cutlery items or dishes Pewter or copper items Lead crystal glass Steel items prone to rusting Wooden platters tems made from synthetics fibres Only wash stoneware in the dishwasher if it is specially marked as being dishwasher safe by the manufacturer Glazed patterns may fade if machine washed frequently Silver and aluminium parts have a tendency to discolour during washing Residues e g egg white egg yolk and mustard often cause dis colouring and staining on silver Therefore al ways clean left overs from silver immediately if it is not to be washed straight after use Load cutlery and dishes The lower basket The lower basket is designed to take sauce pan lids plates salad bowls cutlery etc The rows of prongs on the right side in the lower basket can lie flat to allow you to load pots pans and bowls The cutlery basket A Long bladed knives stored in an upright position are a potential hazard Long and or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket Take care when loading or unloading sharp items such as knives Forks and spoons must be placed in the removable cutlery basket with the handles facing downwards and the knives with their handles facing upwards If the2. Unlock the filter system using the E handle on the microfilter AT Warning Before cleaning the filters ensure that the machine is switched off 14 3 Turn the handle about 1 4 a turn anti clockwise and remove the filter system 4 Take hold of the coarse filter A by the handle with the hole and remove from the microfilter B 5 Clean all filters thoroughly under running water 6 Remove the flat filter from the base of the washing compartment and clean both faces thoroughly Z 7 Put the flat filter back in the base of the washing compartment and ensure that it fits perfectly 8 Place the coarse filter A in the microfilter B and press together 9 Put the filter combination in place and lock by turning the handle clockwise to the stop During this process ensure that the flat filter does not protrude above the base of the washing compartment NEVER use the dishwasher without fil ters Incorrect repositioning and fitting of the filters will produce poor washing re sults and will result in damage to the appliance i NEVER try to remove the spray arms If residues of soil have clogged the holes in the spray arms remove the debris with a cocktail stick External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth If necessary use only neutral detergents Never use abrasive products scouring pads or sol vent acetone tri
3. detergent salt and rinse aid suitable for dishwashers e Avoid opening the door whilst the appli ance is in operation hot steam may es cape Do not take any dishes out of the dishwasher before the end of the washing cycle e After use isolate the appliance from the power supply and turn off the water sup ply Unloading the dishwasher UE URN 12 Washing programmes 13 Care and cleaning 13 What tO do TE errereen 15 BK elle Ee 16 Hints for test institutes 16 I StallatlOn BEE TZ Water Gonnectlon 18 Electrical connection e EE 20 Environment concerns 20 Subject to change without notice This product should be serviced only by an authorized service engineer and only genuine spare parts should be used Under no circumstances should you at tempt to repair the machine yourself Re pairs carried out by inexperienced persons could cause injury or serious malfunction ing Contact your local Service Force Cen tre Always insist on genuine spare parts General safety Dishwasher detergents can cause chemi cal burns to eyes mouth and throat Could endanger life Comply with the safety in structions of the dishwasher detergent manufacturer The water in your dishwasher is not for drinking Detergent residues may still be present in your machine Ensure that the door of th
4. handles protrude from the bottom of the basket obstructing the lower spray arm load the cutlery with the handles facing upwards Mix spoons with other cutlery to prevent them from sticking together For best results we recommend that you use the cutlery grids if the size and dimensions of the cutlery allow it For larger utensils use only 1 grid The upper basket The upper basket is designed for saucers salad bowls cups glasses pots and lids Arrange items on and underneath the cup racks so that water can reach all surfaces 10 Maximum height of the dishes in the lower basket basket oh ah OY With upper basket 29 To move to the higher position proceed as follows 1 Pull out the basket until it stops 2 Hold the upper basket by the handle on the side 3 Carefully lift up the basket until it stops x Glasses with long stems can be placed up side down in the cup racks For taller items the cup racks can be folded upwards 4 Lower it vertically The mechanism will engage the basket in the higher or lower position A After loading your machine always Before closing the door ensured that close the door as an open door can the spray arms can rotate freely be a hazard Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position Use of detergent i Only use de
5. has ended It also has added functions of Salt Comes on when the special salt has run out Rinse aid Comes on when the rinse aid has run out End visual signalling as the setting of the water softener deactivation activation of the audible signals intervention of an alarm due to malfunction of the appliance Setting mode Press the On Off button if ALL programme indicator lights are off and the End indicator light is flashing the appliance is in setting mode i Always remember that when performing the following operations selecting a washing programme setting the water softener level deactivating activating the audible signals the appliance MUST be in setting mode Press the On Off button if a programme in dicator light is on with a fixed light the last performed or selected programme is still set In this case to return to setting mode the programme has to be cancelled To cancel a set programme or a programme in progress Press and hold for about 3 seconds the programme selection cancel button until the End indicator light is flashing The pro gramme has been cancelled and the appli ance is now in setting mode Audible signals Audible signals have been introduced to help indicate which operations the appliance is performing end of the washing programme intervention of an alarm due to malfunction of the appliance Factory setting audible signals activated It is p
6. the dishwasher The drain hose can face either to the right or left of the dishwasher Ensure the drain hose is not bent or squashed as this could prevent or slow down the discharge of water The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diame ter of the hose provided Likewise the internal diameter of the cou plings used for connections to the waste outlet must be no smaller than the diameter of the hose provided 19 When connecting the drain hose to an under sink trap spigot the entire plastic mem brane A must be removed Failure to re move all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot i Our appliances are supplied with a Security device to protect against the re turn of dirty water back into the machine If the spigot of your sink has a no return valve incorporated this can prevent the correct draining of your dishwasher We therefore advise you to remove it i To avoid water leakage after installation make sure that the water couplings are tight 20 Electrical connection A Warning Safety standards require the appliance to be earthed Prior to using the appliance for the first time ensure that the rated volt age
7. 2 5 4 10 7 18 0 7 1 8 lt 4 St lt 0 7 Setting manually i The dishwasher is factory set at position 2 Open the dishwasher door Remove the lower basket from the dishwasher Turn the water hardness dial to position 1 or 2 see chart Replace the lower basket d Oy NS Setting electronically i The dishwasher is factory set at level 5 1 Press the On Off button The dishwasher must be in setting mode 2 Press and keep pressed the programme selection cancel button until programme light A flashes and programme light B comes on with a fixed light Wait until pro gramme light B goes off The programme Use of dishwasher salt 7 Warning Only use salt specifically designed for use in dishwashers All other types of salt not specifically designed for use in a dishwasher especially table salt will damage the water softener Only fill with salt just before starting one of the complete washing programmes This will prevent any grains of salt or salty water which may have been spilt remaining on the bottom of the machine for any period of time which may cause corrosion Adjusting the water hardness setting yes manually electronically level 8 1 level 2 yes 1 level 1 no light A goes on flashing and simultaneously the End indicator light starts flashing Wait until programme light B goes off the programme light A goes on flashing and simultaneously the End indicator light starts flashing This
8. User manual S TATE ome QUEM d c7 P VA6111LT Contents Safety inforrmatiOn rrr 2 Product descriptlOli ues ox teen 3 Conto panel copre ihnen eres 4 ESTUS EE 5 Set the water softener 5 Use of dishwasher salt 6 7 SE 8 Load GUEIERVANGIGISNES seet earn 9 Jserof detergerit cene erinnere 10 Select and start a washing programme 11 Ce AN _ Safety information i In the interest of your safety and to en sure the correct use before installing and first using the appliance read this user manual carefully including its hints and warnings To avoid unnecessary mistakes and accidents it is important to ensure that all people using the ance are thoroughly familiar with its operation and safety features Save these instructions and make sure that they remain with the appliance if it is moved or sold so that everyone using it through its life will be properly informed on appliance use and safety Correct use e This dishwasher is only intended for wash ing household utensils suitable for ma chine washing Do not put any solvents in the dishwasher This could cause an explosion Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket Only use products
9. allation A Warning Any electrical and or plumbing work required to install this appliance should be carried out by a qualified electrician and or plumber or competent person Remove all packaging before positioning the machine possible position the machine next to a water tap and a drain This dishwasher is designed to be fitted un der a kitchen counter or work surface Attention Carefully follow the instructions on the enclosed template for building in the dishwasher and fitting the furniture panel No further openings for the venting of the dishwasher are required but only to let the water fill and drain hose and power supply cable pass through 17 Arrangement lower basket COO Gas Pa PLY As The dishwasher incorporates adjustable feet to allow the adjustment of the height During all operations that involve accessibility to internal components the dishwasher has to be unplugged When inserting the machine ensure that the water inlet hose the drain hose and the sup ply cable are not kinked or squashed Fixing to the adjacent units The dishwasher must be secured against tilt ing Therefore make sure that the counter it is fixed under is suitably secured to a fixed structure adjacent kitchen units cabinets wall Levelling Good levelling is essential for correct closure and sealing of the door 18 When the appliance is correctly levelled the door will not catch on eit
10. and type of supply on the rating plate match that of the supply where the appliance is to be installed The fuse rating is also to be found on the rating plate Always plug the mains plug into a correctly installed shockproof socket Multi way plugs connectors and ex tension cables must not be used This could constitute a fire hazard through overheating If necessary have the domestic wir ing system socket replaced In case that the electrical cable has to be replaced contact your local Service Force centre The plug must be accessible after the appliance has been installed Never unplug the appliance by pull ing on the cable Always pull the plug The manufacturer accepts no liability for failure to observe the above safety precautions Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local council your household waste disposal service or the shop where you purchased the product Packaging material The packagin
11. assware or knife blades Daily _ e Check if it s necessary to refill with dishwasher salt or rinse aid e Load cutlery and dishes into the dishwasher Fill with dishwasher detergent e Select a wash programme suitable for the cutlery and dishes Start the wash programme Helpful hints and tips Sponges household cloths and any object that can absorb water may not be washed in the dishwasher Before loading the dishes you should Remove all left over food and debris Soften remnants of burnt food in pans When loading the dishes and cutlery please note Dishes and cutlery must not impede the rotation of the spray arms Load hollow items such as cups glasses pans etc with the opening downwards so that water cannot collect in the container or a deep base Dishes and items of cutlery must not lie inside one another or cover each other To avoid damage to glasses they must not touch Lay small objects in the cutlery basket Plastic items and pans with non stick coat ings have a tendency to retain water drops these items will not dry as well as porcelain and steel items Light items plastic bowls etc must be loaded in the upper basket and arranged so they do not move For washing in the dishwasher the following cutlery and dishes are not suitable are of limited suitability Cutlery with wooden horn china or mother of pearls handles
12. chloroethylene etc Internal cleaning Ensure that the seals around the door the detergent and rinse aid dispensers are cleaned regularly with a damp cloth We recommend every 3 months you run the wash programme for heavy soiled dishes us ing detergent but without dishes Prolonged periods of non operation If you are not using the machine for a pro longed period of time you are advised to 1 Unplug the appliance and then turn off the water 2 Leave the door ajar to prevent the forma tion of any unpleasant smells 3 Leave the inside of the machine clean Frost precautions Avoid placing the machine in a location where the temperature is below O C If this is unavoidable empty the machine close the appliance door disconnect the water inlet pipe and empty it Moving the machine If you have to move the machine moving house etc 1 Unplug it 2 Turn the water tap off 3 Remove the water inlet and discharge hoses 4 Pull the machine out together with the hoses What to do if 15 Avoid over tilting the machine during trans portation The dishwasher will not start or stops during operation Certain problems can be due to the lack of simple maintenance or oversights which can be solved with the help of the hints described in the chart without calling out an engineer Switch off the dishwasher and carry out the following suggested corrective actions Fault codes and malfunction Pos
13. d cause injury or serious malfunction ing Contact your local Service Force Cen tre Always insist on genuine spare parts General safety Dishwasher detergents can cause chemi cal burns to eyes mouth and throat Could endanger life Comply with the safety in structions of the dishwasher detergent manufacturer The water in your dishwasher is not for drinking Detergent residues may still be present in your machine Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded In this way you will avoid any body tripping over the open door and hurt ing themselves Do not sit or stand on the open door Child safety This appliance is designed to be operated by adults Do not allow children to use the dishwasher unsupervised Keep all packaging well away from chil dren There is a risk of suffocation Keep all detergents in a safe place out of children s reach Keep children well away from the dishwasher when the door is open Control panel On Off button Delay start button Programme selection cancel button PROGRAM RESET Indicator lights Programme lights Programme lights A and B In addition to the selection of the corre sponding washing programme these lights will also guide you in the following operations setting the water softener level deactivating activating the audible signals Indicator lights Comes on when a washing programme
14. e suitable for your water hardness See the manufacturers instructions The refilling of the salt container and the rinse aid dispenser are no longer necessary In this case the rinse aid indi cator light will always remain illuminated when the machine is switched on 2 Select the lowest setting for water hard ness and rinse aid dosage If the drying results are not satisfactory we recommend that you 1 Fill up the rinse aid dispenser with rinse aid 2 Set the rinse aid dosage to position 2 If you decide to turn back to the use of standard detergent system we advise that you 1 Fillup the dispensers for salt and rinse aid again 2 Adjust the water hardness setting to the highest setting and perform 1 normal washing programme without loading any dishes 3 Adjust the water hardness setting ac cording to the hardness of the water in your area 4 Adjust the rinse aid dosage i Select the washing programme with the door slightly opened The start of the programme will occur only after the closure of the door Until then it is possible to modify the settings 1 Check that the baskets have been loaded correctly and that the spray arms are free to rotate 2 Check that the water tap is opened 12 3 Press the On Off button The dishwasher must be in setting mode 4 Press the programme selection cancel button until the light corresponding to the required washing programme comes on see Washing
15. e chart please contact your local Serv ice Force Centre The dishwasher door has not been properly closed Close the door The main plug is not plugged in Insert the main plug The fuse has blown out in the household fuse box Replace the fuse Delay start has been set If dishes are to be washed immediately cancel the delay start Contact your local Service Force Centre quoting the model Mod product number PNO and serial number S N This information can be found on the rating plate located on the side of the dishwasher door So that you always have these numbers at hand we recommend you to make a note of them here 16 GIN Ps eh oe soos medela o em Ee A The wash results not satisfactory The dishes are not The wrong programme has been selected clean The dishes are arranged in such a way as to stop water reaching all parts of a surface The baskets must not be overloaded The spray arms do not rotate freely due to incorrect arrangement of the load The filters in the base of the washing compartment are dirty or incorrectly positioned Too little or no detergent has been used Where there are limescales deposits on the dishes the salt container is empty or incorrect level of the water softener has been set The drain hose connection is not correct salt container cap is not properly closed The dishes are wet Rinse aid was not used and dull The rinse a
16. e dishwasher is always closed when it is not being loaded or unloaded In this way you will avoid any body tripping over the open door and hurt ing themselves Do not sit or stand on the open door Child safety This appliance is designed to be operated by adults Do not allow children to use the dishwasher unsupervised Keep all packaging well away from chil dren There is a risk of suffocation Keep all detergents in a safe place out of children s reach Keep children well away from the dishwasher when the door is open Contents Safety inforrmatiOn rrr 2 Product descriptlOli ues ox teen 3 Conto panel copre ihnen eres 4 ESTUS EE 5 Set the water softener 5 Use of dishwasher salt 6 7 SE 8 Load GUEIERVANGIGISNES seet earn 9 Jserof detergerit cene erinnere 10 Select and start a washing programme 11 Ce AN _ Safety information i In the interest of your safety and to en sure the correct use before installing and first using the appliance read this user manual carefully including its hints and warnings To avoid unnecessary mistakes and accidents it is important to ensure that all people using the ance are thoroughly familiar with its operation and safety features Save these instructions and make sure that they remain with the appliance if it is moved or sold so that everyo
17. g materials are environmentally friendly and can be recycled The plastic components are identified by markings e g gt lt gt PS lt etc Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities ZA Warning When a unit is no longer being used Pull the plug out of the socket Cutoffthe cable and plug and dispose of them Dispose of the door catch This pre vents children from trapping them selves inside and endangering their lives Nederland Home Product Service ATAG Postbus 249 6920 AE DUIVEN tel 0900 5550001 fax 026 8821444 Belgi ATAG Belgi NV 9420 Erpe Mere tel 053 806208 fax 053 806057 Postbus 1033 6920 BA Duiven Nederland 117970490 00 022008
18. her side of the cabi net Water connection Water inlet connection This dishwasher may be fed with either hot max 60 or cold water Nevertheless we advise you use a cold water supply A hot water supply is not always efficient with heavily soiled crockery as it shortens the washing programmes a lot For making the connection itself the cou pling nut fitted to the machine s inlet hose is designed to screw onto a 3 4 gas thread spout or to a purpose made quick coupling tap such as the Press block The water pressure must be within the limits given in the Technical data Your local Wa ter Authority will advise you on the average mains pressure in your area The water inlet hose must not be kinked crushed or entangled when it is being con nected The dishwasher features inlet and drain ho ses which can be turned either to the left or the right to suit the installation by means of the locknut The locknut must be correctly fitted to avoid water leaks Attention NOT all models of dishwash ers have inlet and drain hoses provided with a locknut In this case this facility is not available If the machine is connected to new pipes or pipes which have not been used for a long time you should run the water for a few mi nutes before connecting the inlet hose DO NOT use connection hoses which have previously been used on an old ap pliance i This appliance has been fitted with safety features which will preven
19. id dispenser is empty There are streaks Decrease rinse aid dosage milky spots or a blu ish coating on glasses and dishes Water drops have Increase rinse aid dosage dried onto glasses The detergent may be the cause Contact the detergent manufacturer and dishes consumer care line If after all these checks the problem persists contact your local Service Force Centre Technical data EE Dimensions Width 59 6 cm Height 81 8 89 8 cm Depth 55 5 cm Electrical connection Voltage Information on the electrical connection is given on the rating plate Overall power Fuse on the inner edge of the dishwasher door Water supply pressure Minimum 0 05 MPa 0 5 bar Maximum 0 8 MPa 8 bar Capacity 12 place settings Hints for test institutes Testing in accordance with EN 60704 must aid dispenser have been filled with salt and be carried out with appliance fully loaded and rinse aid respectively and using the test pro using the test programme see gramme see Consumption values tion values Test in accordance with EN 50242 must be carried out when the salt container and rinse Full load 12 standard place settings Amount of detergent required 5g 25 g Type B Rinse aid setting position 4 Type III Arrangement upper basket COIS EH d lt a Y i Remove cup racks on the left hand side ofthe upper basket Inst
20. ight B goes on flashing and the End indicator light is on with a fixed light This indicates that you have activated the function for deactivating activating the audible sig nals The fixed light of the End indicator light means that the audible signals are activated 4 To deactivate the audible signals press the programme selection cancel button again The End indicator light goes off in dicating that the audible signals are de activated 5 Tomemorize the operation switch off the appliance by pressing the On Off button To activate again the audible signals sim ply follow the above operations until the End indicator light comes on Pour 1 litre of water into the salt container and then fill with dishwasher salt Fill the rinse aid dispenser 1 If you want to use combi detergent tablets such as 3 in 1 4 in 1 5 in 1 etc follow the instructions given in Use of detergent The softener should be adjusted according to the hardness of the water in your area Your local Water Authority can advise you on the hardness of the water in your area The water softener must be set in two ways manually using the water hard ness dial and electronically Adjusting the water hardness setting Use of mmol l manually electronically sait 2 level 10 yes 2 level 9 yes 2 level 8 yes 2 level 7 yes 2 level 6 yes 2 level 5 yes 1 level 4 yes 6 Water hardness dH TH mmol l 11 14 19 25 19
21. indi cates that you have activated the electronic setting function of the water softener The current level is indicated by the number of flashes of the End indica tor light and a pause of a few seconds Examples 5 flashes pause 5 flashes pause etc level 5 6 flashes pause 6 flashes pause etc level 6 3 To change the level press the pro gramme selection cancel button Each time the button is pressed the level changes For the selection of the new level see the chart Examples if the current level is 5 by pressing pro gramme selection cancel button once level 6 is selected if the current level is 10 by pressing pro gramme selection cancel button once level 1 is selected 4 Tomemorize the operation switch off the dishwasher by pressing the On Off but ton To fill 1 Open the door remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise 2 Pour 1 litre of water into the container this is necessary only before filling with salt for the first time 3 Using the funnel provided pour in the salt until the container is full 5 Replace the cap tightly turning it clock wise until it stops with a click 1 Do not worry if water overflows from the unit when filling with salt this is quite normal i The salt indicator light on the control panel can remain illuminated for 2 6 hours after the salt has been replenished assuming the dishwasher remains swi
22. ne using it through its life will be properly informed on appliance use and safety Correct use e This dishwasher is only intended for wash ing household utensils suitable for ma chine washing Do not put any solvents in the dishwasher This could cause an explosion Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket Only use products detergent salt and rinse aid suitable for dishwashers e Avoid opening the door whilst the appli ance is in operation hot steam may es cape Do not take any dishes out of the dishwasher before the end of the washing cycle e After use isolate the appliance from the power supply and turn off the water sup ply Unloading the dishwasher UE URN 12 Washing programmes 13 Care and cleaning 13 What tO do TE errereen 15 BK elle Ee 16 Hints for test institutes 16 I StallatlOn BEE TZ Water Gonnectlon 18 Electrical connection e EE 20 Environment concerns 20 Subject to change without notice This product should be serviced only by an authorized service engineer and only genuine spare parts should be used Under no circumstances should you at tempt to repair the machine yourself Re pairs carried out by inexperienced persons coul
23. ossible to deactivate the audible signals Deactivation activation of the audible signals 1 Press the On Off button The appliance must be in setting mode 2 Press and keep pressed the programme selection cancel button until programme light A flashes and programme light B comes on with a fixed light 3 Press programme selection cancel but ton again The programme light A comes on with a fixed light and programme light B starts flashing Wait until programme First use _ Before using your dishwasher for the first time e Ensure that the electrical and water con nections comply with the installation in structions Remove all packaging from inside the ap pliance Set the water softener level Set the water softener _ The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply which would have a detrimental or adverse effect on the operation of the appliance The higher the content of these minerals and salts the harder your water is Water hard ness is measured in equivalent scales Ger man degrees dH French degrees TH and mmol l millimol per litre international unit for the hardness of water Water hardness Kl TH 51 70 91 125 9 1 12 5 43 50 76 90 76 90 37 42 65 75 6 5 7 5 29 36 51 64 5 1 6 4 23 28 40 50 4 0 5 0 19 22 33 39 3 3 3 9 15 18 26 32 2 6 3 2 5 light A goes off The programme l
24. programmes chart Close the dishwasher door the pro gramme starts automatically Setting and starting the programme with delay start i The start of the washing programme will be delayed by 3 hours 1 Select a washing programme 2 Press the delay start button The corre sponding indicator light comes on 3 Close the dishwasher door The count down starts automatically i Opening the door will interrupt the countdown Once the door is closed the countdown will continue from the point at which it was interrupted 4 Once the countdown has elapsed the washing programme will start automatically Cancel a delay start in progress 1 Open the dishwasher door 2 Press the delay start button The corre sponding indicator light goes off 3 Close the dishwasher door The washing programme will start automatically A Warning Interrupt or cancel a washing programme in progress ONLY if it s absolutely necessary Attention Hot steam may escape when the door is opened Open the door carefully Unloading the dishwasher e Hot dishes are sensitive to knocks The dishes should therefore be allowed to cool down before removing from the appliance e Empty the lower basket first and then the upper one this will avoid water dripping from the upper basket onto the dishes in the lower one e Water may appear on the sides and the door of the dishwasher as the stainless Interrupt a washing programme in progress Open
25. rmal so 006807 ae 1 intermediate rinse p Normal 65 Final rinse Drying or ligh Crock d M h b ormal or light rockery an ain wasl SE 60 soil cutlery Final rinse E Main wash Eco 50 Normal soil ope 1 intermediate rinse ie Final rinse Drying a Partial load to be T he E to avoid food scraps from Any completed later in Rinse and Hold the day This programme does not require the use y of detergent 1 Ideal for washing a partially loaded dishwasher This is the perfect daily programme made to meet the needs of a family of 4 persons who only wish to load breakfast and dinner crockery and cutlery 2 Test programme for test institutes Consumption values Programme Programme duration Energy consumption Water consumption in minutes in litres 1 1 Intensive 70 120 130 1 8 2 0 22 24 Normal 65 100 110 1 4 1 6 19 21 Quick 60 30 0 9 9 Eco 50 2 130 140 1 0 1 2 14 16 Rinse and Hold 12 0 1 5 1 The consumption values are intended as a guide and depends on the pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes 2 Test programme for test institutes Care and cleaning Cleaning the filters 1 Open the door remove the lower basket The filters must be checked and cleaned 2 The dishwasher filter system comprises a from time to time Dirty filters will degrade the coarse filter A a microfilter B and a flat washing result filter
26. sible cause and solution continuous flashing of the light of the running programme intermittent audible signal 1 flash of the End indicator light The dishwasher does not fill with water continuous flashing of the light of the running programme intermittent audible signal 2 flashes of the End indicator light The dishwasher will not drain continuous flashing of the light of the running programme intermittent audible signal 3 flashes of the End indicator light Anti flood device is activated The water tap is blocked or furred with lime scale Clean the water tap The water tap is turned off Turn the water tap on The filter where present in the threaded inlet hose is blocked Clean the filter The water inlet hose has not been correctly laid or it is kinked or squashed Check the water inlet hose connection The sink spigot is blocked Clean out the sink spigot The water drain hose has not been correctly laid or it is kinked or squashed Check the water drain hose connection Close the water tap and contact your local Service Force Centre CT ae UN Possible cause and solution The programme does not start Once these checks have been carried out switch on the appliance The programme will continue from the point at which it was interrupted If the malfunction or fault code reappears contact your local Service Force Centre For other fault codes not described in the abov
27. t the water used in the appliance from return ing back into the drinking water system This appliance complies with the appli cable plumbing regulations Water inlet hose with safety valve After connecting the double walled water in let hose the safety valve is next to the tap Therefore the water inlet hose is only under pressure while the water is running If the wa If the door does not close correctly loosen or tighten the adjustable feet until the ma chine is perfectly level ter inlet hose starts to leak during this opera tion the safety valve cuts off the running water Please take care when installing the water inlet hose The electrical cable for the safety valve is in the double walled water inlet hose Do not immerse the water inlet hose or the safety valve in water f water inlet hose or the safety valve is damaged remove the mains plug immediately A water inlet hose with safety valve must only be replaced by the Service Force Centre 4 Warning Dangerous voltage Water drain connection The end of the drain hose can be connected in the following ways 1 Tothe sink outlet spigot securing it to the underside of the work surface This will prevent waste water from the sink run ning into the machine 2 Toa stand pipe provided with venthole minimum internal diameter 4 cm The waste connection must be at a height of between 30 cm minimum and 100 cm maximum from the bottom of
28. tched on If you are using salt that takes longer to dissolve then this can take longer The operation of the machine is not affected 4 Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket Use of rinse ad Warning Only use branded rinse aid for dishwashers Never fill the rinse aid dispenser with any other substances e g dishwasher cleaning agent liquid detergent This would damage the appliance Rinse aid ensures thorough rinsing and spot and streak free drying Rinse aid is automatically added during the last rinse 1 Open the container by pressing the re lease button A The dispenser holds about 110 ml of rinse aid which is sufficient for between 16 and 40 washing cycles depending upon the dosage setting 3 Ensure that the lid is closed after every refill i Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash According to the finish and drying results ob tained adjust the dose of rinse aid by means of the 6 position selector position 1 minimum 2 Add the rinse aid in the container The dosage position 6 maximum dosage maximum level for filling is indicated by The dose is factory set in position 4 max Increase the dose if there are drops of water or lime spots on the dishes after washing 8 Reduce it if there are sticky whitish streaks on the dishes or a bluish film on gl
29. tergents specifically de signed for use in dishwashers Please observe the manufacturer s dos ing and storage recommendations as stated on the detergent packaging Using no more than the correct amount of detergent contributes to reducing pol lution Fill with detergent 1 Open the lid 2 Fill the detergent dispenser 1 with de tergent The marking indicates the dosing levels 20 approximately 20 g of detergent 30 approximately 30 g of detergent 3 All programmes with prewash need an additional detergent dose 5 10 g that must be placed in the prewash detergent chamber 2 This detergent will be used during the prewash phase When using detergent tablets place the tablet in compartment 1 f a 4 Close the lid and press until it locks in place Select and start a washing programme 11 i Detergent tablets from different manu facturers dissolve at different rates For this reason some detergent tablets do not attain their full cleaning power during short washing programmes Therefore please use long washing programmes when using detergent tablets to ensure the complete removal of detergent residuals Use of combi detergent tablets These products are detergents with a com bined cleaning rinsing and salt functions They can also contain other different agents depending on which kind of tablets you choose in 1 4 in 1 5 1 etc 1 Check whether these detergents ar
30. the dishwasher door the programme will stop Close the door the programme will start from the point at which it was interrup ted Cancel a washing programme in progress Open the dishwasher door press the pro gramme selection cancel button for about 3 seconds until the light of the running programme goes off and the End indicator light flashes The washing programme has been cancelled and the appliance is now in setting mode H a new washing programme is to be se lected check that there is detergent in the detergent dispenser End of the washing programme The dishwasher will automatically stop and an audible signal informs you of the end of the washing programme Open the dishwasher door The End of programme indicator light is on The indicator light of the programme just ended remains on 1 Switch off the dishwasher by pressing the On Off button 2 Leave the dishwasher door ajar and wait a few minutes before removing the dishes in this way they will be cooler and the drying will be improved steel will eventually become cooler than the dishes When the washing programme has finished it is recommended that the dishwasher is unplugged and the water tap turned off 13 Washing programmes Washing programmes Degree of soil Type of load Programme description Prewash Crockery cutlery Main wash H 2int i Intensive 70 SAQUE 7 bel Omura Drying Main wash B No
Download Pdf Manuals
Related Search