A61683, User's Guide for A3/A4 Flatbed Acccessory for i2000
Contents
1. A3 Flatbed Accessory A4 Flatbed Accessory for i2400 12600 12800 Scanners User s Guide Safety User Precautions Place the scanner on a sturdy level work surface capable of supporting 5 5 kg 12 Ibs Do not install the scanner in a location subject to dust humidity or steam This may cause electrical shock or a fire Only use the scanner indoors in a dry location Make sure the electrical power outlet is located within 1 52 meters 5 feet of the scanner and is easily accessible Use only the power cord that was provided with the scanner Using any other power cord may cause electrical shock and or damage the product Be sure the power cord is securely plugged into the wall outlet Failure to do so may cause electrical shock or fire Do not damage knot cut or modify the power cord This may cause electrical shock or fire The scanner requires a dedicated power outlet Do not use an extension cord or power strip with the scanner Use only the AC adapter that is supplied with the scanner Do not use the scanner s AC adapter with any other product Leave sufficient soace around the power outlet so it can be easily unplugged in case of an emergency Do not use the scanner if it becomes inordinately hot has a strange odor emits smoke or makes unfamiliar noises Immediately stop the scanner and disconnect the power cord from the power outlet Contact Kodak Service Do not disassemble or modify the scanner or the AC power adapte2. scanning NOTE Each press of the Start button results in one image file Start button LED Indicator LED lights illuminates or flashes indicating scanner status e Steady green flatbed is ready to scan e Steady red indicates an error e Flashing green waiting Energy Star mode scanning busy e Flashing red flatbed failure A 61683 Part No 5K0410 September 2011 3 Using the flatbed Cleaning the flatbed Use the flatbed to scan documents that cannot be scanned using the automatic document feeder 1 Open the flatbed cover 2 Place the document face down on the glass platen 3 Position the document in the corner aligned with the arrow 4 Close the flatbed cover 5 Start scanning You can scan the document using the Start button on the scanner flatbed or host PC The flatbed s glass platen can collect fingerprints and dust which may lessen the quality of your image Use Staticide Wipes for Kodak Scanners CAT No 896 5519 or Brillianize Detailer Wipes for Kodak Scanners CAT No 826 6488 to clean the glass platen IMPORTANT Staticide wipes contain isopropanol which can cause eye irritation and dry skin Wash your hands with soap and water after performing maintenance procedures Refer to the MSDS for more information 1 Open the flatbed cover 2 Wipe the glass platen using a Brillianize Detailer wipe Step 1 ora Staticide wipe j OS i ASS i N Li L y SS 3 D
3. the flatbed Before you begin be sure your Kodak i2400 i2600 i2800 Scanner is already installed 1 Attach the USB power adapter to the Kodak A4 or A3 Flatbed Accessory 2 Insert the USB cable into the USB port on the USB power adapter then insert the other end of the USB connector into an available USB port on the host PC must be USB 2 0 high speed compatible 3 Attach the power supply to the USB power adapter 4 Attach the AC power cord to the power supply and then plug the AC power cord into wall outlet 2 A 61683 Part No 5K0410 September 2011 5 When the green LED is on and steady on the flatbed the flatbed is ready to use 6 Verify that the green LED on the flatbed is on before turning on the i2400 12600 12800 scanner If the scanner power was on before the green LED was on and steady on the flatbed you will need to power cycle your scanner NOTE If you need to remove the USB power adapter push down on the red tab to release it from its position LEDs and Start You can scan a document using the Start button on the scanner or from button the host PC When you press the Start button on the flatbed it initiates the same action as pressing the Start button on the scanner which launches the selected application that is associated with the displayed number in the function window If you are scanning several exception documents using the flatbed it may be easier to use the Start button on the flatbed to start
4. commercial use In the event that it has been mistakenly sold or purchased please exchange it for equipment certified for home use o IE APSSS YATARSA S1 2120 SU BOA CS ASAE OLAS FASHA de OHO Arse DO Ee POS SM PASSE metal EUC NOTE When this accessory is connected to the base scanner the system is Class A Using the Kodak A4 A3 Flatbed Accessory The Kodak A4 Flatbed Accessory and Kodak A3 Flatbed Accessory adds scanning capability for exception documents to your Kodak Scanner Scanner models include i2400 i2600 and i2800 Specifications Features A3 Flatbed A4 Flatbed Height f159omt626in 8 7 om 8 38 in Width 48 8 cm 17 24 in 28 6 cm 11 25 in Length 71 1 cm 28 in 47 6 cm 18 75 in 10 8 kg 24 Ib 3 7 kg 8 05 Ib Optical Resolution 600 dpi 1200 dpi Accommodates A3 297 x 420 mm A4 210 x 297 mm document sizes up to 11 69 x 16 54 in o 8 27 x 11 69 in or dies size 11 x 17 in letter size 8 5 x 11 in Unlocking the flatbed When the Kodak A4 or A3 Flatbed Accessory is shipped the flatbed is placed in a Locked position Unlock the flatbed before you install it The Lock Unlock lever is on the bottom of the scanner 1 Turn the scanner over to locate the Lock Unlock lever 2 Move the lever into the Unlocked position NOTE It is not necessary to lock the flatbed accessory unless you need to ship it to another location A 61683 Part No 5K0410 September 2011 1 Installing
5. d the user s authority to operate the equipment Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product they must be used in order to ensure compliance with FCC regulation European Union WARNING This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Japan This is a Class A product based on the standard of the Voluntary Control Council for interference by information Technology Equipment VCCI If this is used in a domestic environment radio disturbance may arise When such trouble occurs the user may be required to take corrective actions BRESAtMaliiipe VCC 0 _O ES Rink CHAS SE BE SEs OBS ARMED CNR Ee Taiwan WARNING This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Sake gs re AAA Baten TER Eee eA ARCS Re NATE TEER h FAA 2K OK RAR Es BAER Peoples Republic of China WARNING This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures Fa irr EE AAR m a FEA TOP AY RE m Be FAP TSP AER SEY AT NI a Korean Please note that this equipment has obtained EMC registration for
6. r Do not move the scanner with the power cord and interface cable attached This may cause damage to the cord cable Remove the power cord from the wall outlet before moving the scanner Follow the Kodak recommended cleaning procedures Do not use air liquid or gas spray cleaners These cleaners displacedust dirt and debris to other locations within the scanner which may cause the scanner to malfunction Environmental information The Kodak A4 Flatbed Accessory amd Kodak A3 Flatbed Accessory is designed to meet worldwide environmental requirements Guidelines are available for the disposal of consumable items that are replaced during maintenance or service follow local regulations or contact Kodak locally for more information Disposal of this material may be regulated due to environmental considerations For disposal or recycling information contact your local authorities or in the USA visit the Electronics Industry Alliance website www eiae org NOTE Product contains mercury dispose according to local state or federal laws The product packaging is recyclable Material Safety Data Sheets MSDS for chemical products are available on the Kodak website at www kodak com go msds When accessing the MSDSs from the website you will be required to provide a keyword or catalog number of the consumable you want the Material Safety Data Sheet for European Union This symbol indicates that when the last user wishes to discard this prod
7. ry the glass platen using a Brillianize Detailer wipe Step 2 or an almost dry Staticide wipe to remove any streaks 4 Close the flatbed cover A 61683 Part No 5K0410 September 2011 Accessories The Kodak Black Background Accessory CAT No 863 6870 is available for use with the Kodak A4 Flatbed Accessory This accessory eliminates bleed through when scanning two sided documents It can also be used if you are scanning documents that are primarily white and you want a defined black border on your images A 61683 Part No 5K0410 September 2011 5 Eastman Kodak Company 343 State Street Rochester NY 14650 U S A Kodak 2011 All rights reserved TM Kodak
8. uct it must be sent to appropriate facilities for recovery and recycling Please contact your local Kodak representative or refer to www kodak com go recycle for additional information on the collection and recovery programs available for this product Please consult www kodak com go REACH for information about the presence of substances included on the candidate list according to article 59 1 of Regulation EC No 1907 2006 REACH Acoustic emission Maschinenlarminformationsverordnung 3 GSGV Der arbeitsplatzbezogene Emissionswert betragt 70 db A Machine Noise Information Ordinance 3 GSGV The operator position noise emission value is 70 dB A EMC statements United States This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense Any changes or modifications not expressly approved by the party responsible for compliance could voi
Download Pdf Manuals
Related Search