Instruction Installation Manual for Power Supply Units
Contents
1. SYSMAC CJ series Programmable Controllers OMRON Instruction Installation Manual for Power Supply Units OMRON Corporation 2013 All Rights Reserved 4028144 9D Precautions for Compliance with UL Standards and CSA Standards Notice to Users of the SYSMAC CJ series Power Supply Units in the USA and Canada Please use the following installation information instead of the general information in the instruction manuals in order to use the product under certified conditions of UL and CSA when the product is installed in the USA or Canada These conditions are required by NFPA 70 National Electrical Code in the USA and the Canadian Electrical Code Part in Canada and may vary from information given in the product manuals or safety precautions Wiring for the Field Wiring Terminals Do not use crimp terminals for field wiring Do not insert more than one wire in one terminal Tightening torque of the terminals 9 Lb In 1 0 N m Wire range AWG 20 to 14 Environment surrounding air temperature 55 C Compliance with Class Division 2 Hazardous Location Input and output wiring must be in accordance with Class Div 2 wiring methods and in accordance with the authority having jurisdiction This device is open type and is required to be installed in a suitable enclosure that can only be accessed with the use of a tool or key 1 This equipment is suitable for use in Class Div 2 Group A B2. C D or Non Hazardous Locations Only 2 WARNING Explosion Hazard Substitution of Components may Impair Suitability for Class Div 2 3 WARNING Explosion Hazard Do not Disconnect Equipment Unless Power Has Been Switched off or the Area Is Known to Be Non Hazardous 4 This device is open type and is required to be installed in an enclosure suitable for the environment and can only be accessed with the use of a tool or key 1 Cet equipement convient a l utilisation dans des emplacements de Classe Division 2 Groupes A B C D ou ne convient qu a l utilisation dans des endroits non dangereux 2 AVERTISSEMENT Risque d explosion La substitution de composants peut rendre ce materiel inacceptable pour les emplacements de Classe Division 2 3 AVERTISSEMENT Risque d explosion Avant de debrancher l equipement couper le courant ou s assurer que l emplacement est designe non dangereux 4 Ce dispositif est de type ouvert et doit etre installe dans un coffret adapte a l environnement et auquel on ne pourra acceder uniquement au moyen d un outil ou d une cle
Download Pdf Manuals
Related Search