Home

Nyon operating instructions

1. Custom Modes Custom Riding Modes Four different riding modes can be configured with this expansion This means that for each of the four riding modes you can set the level of motor assistance at three points based on the speed Transferring the maps to Nyon Nyon only has the maps currently required for navigation in its cache memory 21 and automatically loads the areas required for navigation as required If Nyon realises that it needs additional map material it initially either searches for map material available locally in the main memory 22 of the Nyon or it searches for map material in the smartphone memory 23 If the required maps are not available Nyon connects to the internet via the smartphone and automatically downloads the required map material from the internet into its cache memory 21 Caution Roaming fees may be charged if you ride your eBike abroad For this reason load the required maps onto your smartphone or your Nyon before embarking on your journey abroad W 276 001 DPNen 23 9 14 Bosch eBike Systems English 41 The maps are transferred to the Nyon cache memory as follows Downloading the maps to the smartphone and transferring them to Nyon On your smartphone select the Navigation Licences amp Offline Maps menu item in the Shop menu and load the desired maps onto your smartphone If Nyon requires maps the data will load auto matically via Bluetooth from yo
2. page English 34 The motor output depends on the settings of the assis tance level on the on board computer Version Cruise As soon as you stop pedalling when in normal operation or as soon as you have reached a speed of 25 km h the assistance from the eBike drive unit is switched off The drive is automatically re activated as soon you start pedalling again and the speed is below 25 km h Version Speed As soon as you stop pedalling when in normal operation or as soon as you have reached a speed of 45 km h the assistance from the eBike drive is switched off The drive is automatically re activated as soon as you start pedalling and the speed is below 45 km h Options for switching off the eBike system Press the On Off button 5 of the on board computer for at least 1 second Switch the eBike battery pack off by its On Off button see battery pack operating instructions Remove the on board computer out of its holder W 276 001 DPNen 23 9 14 Bosch eBike Systems English 17 If no power is drawn from the drive for about 10 minutes e g because the eBike is not moving or no button is pressed on the Nyon the eBike system will shut down automatically to save energy Inserting and removing the on board computer To insert the on board computer 3 slide it from the front into the holder 4 To remove the on board computer 3 press the lock latch 17 and slide the on board computer toward the front out ofthe holder
3. Nyon operating instructions Online version en Original instructions W 276 001 DPNen 2014 09 T 55 2 Table of Contents Safety Notes icc nn regen gete 5 General Safety RUES msn e i e wishes ned eee 5 Safety Warnings for eBikes 0 c cece cence eee eens 6 Congratulations ccc ee cece ec ecececeececececsees 8 Updates 8 First steps 9 The Nyon operating system 222 00 c cece cece eee eee 11 Pr mium features i262 0s0g ceedwavendstananmiesde peace wes 12 Smartphone compatibility 00 c cece cece eee eee 13 Operating logic zn di HN 14 Main Menu nein Aiko ica sete 15 Initial Operation nase 16 Reduirements 2 een er eae nae 16 Switching the eBike System On Off ccc eee eeee Inserting and removing the on board computer Switching on shutting down the on board computer 17 Power Supply of External Devices viaUSB Connection 17 Initial Operation of the On board Computer 00 18 Registration at the On board Computer 0000 ee 18 Connecting a heart rate monitor to Nyon 0c eee e eee 20 Operation Sonara na tc ROE E E E E Sa 21 Displays and configurations of the on board computer 21 Operating mode Dashboard Operating mode Ride ccc cc cece cece eee eee eens Operating mode Map amp Navigation 00 ce eee eee 23 Opera
4. The training effect is calculated from pedal power and the duration of an eBike journey The calculation accounts for the age body size weight and activity level of the rider This enables the rider to be warned of possible overexertion in relation to his her fitness level For example an unfit eBike rider may be notified of possible overexertion after only 30 minutes whereas a very fit rider will not be notified at all if subjected to the same strain or may only by notified after 2 hours if subjected to very heavy strain 6 205 f5 10177 f6 f1 Clock f2 Current performance heart rate f3 Display of the current training effect f4 Training effect in words f5 Kilocalories burned f6 Current cadence f7 Average speed f8 Duration When using a heart rate monitor to measure the heart rate not included in the delivery your current heart rate will be displayed instead of the performance W 276 001 DPNen 23 9 14 Bosch eBike Systems English 27 Pressing the joystick 1 to the right enables you to choose from the follow ing options Custom Screen The settings of the configuration data are made usingthe Bosch eBike Connect application on a smartphone or via the online portal Reset Trip This option can be used to reset the trip meter calories burned and all average values to 0 Bosch eBike Systems W 276 001 DPNen 23 9 14 English 28 EI Operating mode Settings
5. This operating mode allows you to set the basic configurations of your on board computer Note Some basic configurations can only be changed when Nyon is insert ed into the holder 4 To reach the Settings menu press the joystick 1 down in the main menu until Settings is displayed Tip If you press the joystick down long enough you will also reach the Settings menu The following configurations can be made Connections You can configure the Bluetooth settings a new smartphone connection a WiFi connection or a heart rate monitor When you enable WiFi Nyon searches for available networks Found networks will be displayed Use the joystick 1 to select the desired net work and enter the password My eBike When Nyon is plugged in you can change the pre set value given by the manufacturer of the wheel circumference by 5 International You can set speed and distance in kilometres or miles display clock in 12 or 24 hour format select the time zone and set your preferred language The current time is automatically taken from the GPS signal 4 Imperial Units Map amp Navigation Here under Map Style you can select the dis play mode 2D or 3D for Freeride and Navigation and turn on au tomatic adaptation of the map display depending on the ambient bright ness Brightness You can adjust the brightness of the display here My Nyon H
6. while pedalling The assistance level can be changed at any time even while cycling Note For individual versions it is possible that the assistance level is pre set and cannot be changed Itis also possible that less assistance levels are available for selection than listed here The following assistance levels max are available OFF The motor assistance is switched off the eBike can be operated as anormal bicycle through pedaling ECO Effective assistance at maximum efficiency for maximum cruis ing range TOUR Uniform assistance for touring with long cruising range SPORT Powerful assistance for sportive riding off road as well as for urban traffic TURBO Maximum assistance supporting highest cadence for spor tive riding To increase the assistance level press the 14 button on the operating unit until the desired assistance level appears in the display r5 To de crease the assistance level press the button 13 W 276 001 DPNen 23 9 14 Bosch eBike Systems English 33 The requested motor output is displayed in indicator r4 The maximum motor output depends on the selected assistance level Assistance Level Assistance Factor Derailleur ECO 50 TOUR 120 SPORT 190 TURBO 275 The motor output can vary for individual versions When the on board computer is removed from the holder 4 the last indi cated assistan
7. 4 gt Remove the on board computer when you park the eBike It is possible to secure the on board computer against removal in the holder To do so remove the holder 4 from the handlebar Put the on board com puter in the holder Screw the locking screw 18 thread M3 8 mm long from below into the thread provided in the holder Mount the holder back onto the handlebar Switching on shutting down the on board computer To switch on the on board computer briefly press the On Off button 5 To shut down the on board computer press the On Off button 5 for at least 1 second If no button is pressed after 5 minutes Nyon goes into power saving mode back lighting off and shuts down automatically after a further 5 minutes Power Supply of External Devices via USB Connection With the USB connection itis possible to operate and charge most devices whose power supply is possible via USB e g various mobile phones Prerequisite for charging is that the on board computer and a sufficiently charged battery pack are inserted in the eBike Open the protective cap 9 of the USB port on the on board computer Con nect the USB connection of the external device to the USB port 8 on the on board computer using a standard compliant Micro A Micro B USB 2 0 ca ble Using a USB cable that is not standard compliant or a cable adapter combination can lead to damage to the on board computer Attention Users connected to Nyon can affect the range of the eBi
8. Nyon battery pack If the Nyon battery pack is weak a warning message appears on the display To charge the Nyon battery pack insert the on board computer back into the holder 4 Note that if you do not charge the eBike battery pack straight away the eBike system will automatically switch off after 10 minutes of in activity In this case the charging of the Nyon battery pack will also cease You can also charge the on board computer via the USB port Open the protective cap 9 Connect the USB port 8 of the on board computer via a micro USB cable witha standard USB charger not included in the delivery or the USB port of a computer 5 V charging voltage max 500 mA charging current Note If Nyon is shut down during charging Nyon can only be switched on again if the USB cable has been disconnected If the on board computer is removed from the holder 4 all values of the features are saved and can still be displayed Without recharging the Nyon battery pack date and time will remain up to a maximum of 6 months When switching back on date and time are reset after a successful GPS fix Note To achieve maximum lifetime of the Nyon battery pack you should recharge it every 6 months if not using it Resetting Nyon If contrary to expectations Nyon can no longer be operated then Nylon can be reset by simultaneously pressing the buttons 1 2 5 and 6 Carry out the reset only if absolutely necessary as various configurations may
9. Pe wo Bosch eBike Systems W 276 001 DPNen 23 9 14 English 10 10 Operating unit 11 Joystick on the operating unit 12 Home button on the operating unit 13 Decrease assistance level button 14 Increase assistance level button 16 Button push start aid WALK 17 Lock latch for on board computer 18 Locking screw for on board computer W 276 001 DPNen 23 9 14 Bosch eBike Systems English 11 The Nyon operating system The Nyon operating system consists of three components the Nyon on board computer with operating unit the smartphone application Bosch eBike Connect the online portal www eBike Connect com a lf Standard functions Advanced functions Data collection and and display evaluation Login on Nyon Registration in online Registration in online portal portal Operation of eBike User defined settings User defined settings Recording and visuali Purchaseanddownload Import and evaluation sation of journey data of premium features of routes travelled and navigation licences Navigation Convenient route Advanced display with planning statistics Convenient route planning Many configurations and features can be managed and used on all compo nents Some configurations and features can be accessed or operated only via certain components The synchronization of data occurs automatically during Bluetooth internet connection The
10. and change your password My eBike The entries in this menu are partly automatically read out when linking and registering with the Nyon mounted on the bike and are displayed here Missing data can be supplemented here or existing data can be changed Changeable entries have black text whereas grey text cannot be changed Custom Screens You can create a custom view for each of the operat ing modes Ride and Fitness You can choose from three layouts for the custom views in the upper section A and you can select the data you want to have displayed in both sec tions This is done by selecting the cor responding field in the middle section B and then selecting the desired val ues or graphs from the list in the lower section C Save the view to complete amp AltimeterSlope v amp AltimeterTit u the procedure If there is an existing Bluetooth connection the view will then be automatically transferred to the Nyon Custom Riding Modes This setting option is available only if you have purchased it via the shop W 276 001 DPNen 23 9 14 Bosch eBike Systems sal a 80 English 43 You can configure four different riding modes however you like For the configuration there are five definable checkpoints or stages available For the middle three points you can select any desired performance assistance for a certain speed For the outer two poi
11. approx kg 0 2 Bosch eBike system uses FreeRTOS see www freertos org Bosch eBike Systems W 276 001 DPNen 23 9 14 English 48 Error Code Indication The components of the eBike system are continuously and automatically monitored If an error is detected the respective error code is indicated on the on board computer Depending on the type of error the drive unit is automatically shut off if re quired Continued travel without assistance from the drive unit is possible at any time However have the eBike checked before attempting new trips gt Trouble shooting actions may be performed by the owner except those explicitly noted as Contact your Bosch eBike dealer Code Cause Corrective Measure 410 One or more buttons of Check if any buttons are blocked e g the on board computer from dirt or debris Clean the buttons are blocked if required 414 Connection problem of Have connections and contacts the operating unit checked Contact your Bosch eBike dealer 418 One or more buttons of Check if any buttons are blocked e g the operating unit are from dirt or debris Clean the buttons blocked if required 422 Connection problem of Have connections and contacts the drive unit checked 423 Connection problem of Have connections and contacts the eBike battery pack checked 424 Communication error Have connections and contacts among the components checked 426 Internal time out
12. at your telephone provider For the synchronization of data between the smartphone and online portal an Internet connection is also required To make use of the full functionality of your on board computer you need a smartphone with the Android operating system version 4 0 3 or higher or iOS 7 and higher Compatible smartphones are listed in the table below Manufacturer Compatible smartphones Operating system Apple iPhone 5 5S 5C iOS 27 Apple iPod Touch 5th Generation iOS gt 7 Google Nexus 4 Android gt 4 0 3 HTC Desire X Android gt 4 0 3 HTC One Android gt 4 0 3 HTC One X Android gt 4 0 3 Huawei Ascend P2 Android gt 4 0 3 LG Optimus L7 Android gt 4 0 3 Motorola Razr HD Android gt 4 0 3 Samsung Galaxy S2 Android gt 4 0 3 Samsung Galaxy S3 Android gt 4 0 3 Samsung Galaxy S3 mini Android gt 4 0 3 Samsung Galaxy S4 Android gt 4 0 3 Sony Xperia arc S Android gt 4 0 3 Sony Xperia Z Android gt 4 0 3 Smartphones with the above mentioned operating systems which are not included in the list can be connected under certain circumstances with the on board computer However a complete compatibility of the on board computer with the smartphones not listed can not be guaranteed Download the application Bosch eBike Connect to your smartphone from the Appstore for Apple iPhones and Google Play Store for Android devices Bosch eBike Systems W 276 001 DPNen 23 9 14 E
13. be lost W 276 001 DPNen 23 9 14 Bosch eBike Systems English 31 Battery Charge control Indicator The battery charge level indicator r9 s7 displays the charge level ofthe eBike battery pack The charge level of the Nyon battery pack can be read on the display s1 The charge level of the eBike battery pack can also be read on the LEDs on the eBike battery pack itself In the indicator r9 each large bar in the battery symbol corresponds to ap proximately 20 capacity while each thin bar corresponds to approxi mately 10 capacity IHI The eBike battery pack is fully charged I The eBike battery pack should be recharged IA 4 The capacity for assisting the drive has been used up and assis c tanceis gently switched off The remaining capacity will be pro vided for the bike light and the on board computer The capacity of the eBike battery pack is enough for about 2 hours of lighting This does not account for other consumers e g automatic gearbox charging external devices at the USB port A 1 Nyon has never been inserted into the holder 4 or Nyon has L I been reset to the factory configurations If the on board computer is removed from the holder 4 the last displayed battery charge level is saved Bosch eBike Systems W 276 001 DPNen 23 9 14 English 32 Setting the Assistance Level 10 3 14 7 15 On the operating unit 10 you can set how much the eBike drive assists you
14. error Restart the system If the problem per sists contact your Bosch eBike dealer 430 internal battery pack of Charge the on board computer in the the on board computer holder or via the USB port is empty W 276 001 DPNen 23 9 14 Bosch eBike Systems English 49 Code Cause Corrective Measure 440 Internal error ofthe Restart the system If the problem per drive unit sists contact your Bosch eBike dealer 450 Internal software error Restart the system If the problem per sists contact your Bosch eBike dealer 490 Internal error of the Have the on board computer checked on board computer 500 Internal error of the Restart the system If the problem per drive unit sists contact your Bosch eBike dealer 502 Bike lighting error Check the light and the associated wir ing Restart the system If the problem persists contact your Bosch eBike dealer 503 Error of the speed Restart the system If the problem per sensor sists contact your Bosch eBike dealer 510 Internal sensor error Restart the system If the problem per sists contact your Bosch eBike dealer 511 Internal error of the Restart the system If the problem per drive unit sists contact your Bosch eBike dealer 530 Battery pack error Switch off the eBike remove the eBike battery pack and reinsert the eBike battery pack Restart the system If the problem persists contact your Bosch eBike dealer 531 Configuration error
15. following table provides an overview of the available features Bosch eBike Systems W 276 001 DPNen 23 9 14 English 12 i GSM CA o 5 un 7 2 T lt oo 6 i SEE l Ba 3 H PEPENE y a A ono Log in registration vv Vv Change of configurations vvv Recording of journey data v Real time display of journey data v Processing analysis of journey data viv Creating user defined displays vv Display of the current location vvv Navigation v Route planning vvv Display of remaining distance circle around the current location vv Training effect in real time v Display of current fitness level no statistics v Overview of journeys vv Statistics Dashboard v v Purchase of premium features vv Premium features The standard features of the Nyon operating system can be expanded via the AppStore for Apple iPhones and Google Play Store for Android devices through the purchase of premium features In addition to the free Bosch eBike Connect application there are sev eral payed premium features User related adaptation of the assistance levels Routing licences for countries regions W 276 001 DPNen 23 9 14 Bosch eBike Systems English 13 Smartphone compatibility Asmartphone is not included in the delivery To register with the smart phone internet connection is required which depending on the contract can generate costs
16. use the navigation in safety critical situations road clo sures diversions etc Always carry with you extra maps and means of communication gt Before beginning any exercise program seek advice from a doctor about which pressure you can place yourself under This is the only way to avoid potential overloading gt When using a heart rate monitor the heart rate displayed may be distorted by electromagnetic interference The heart rates displayed are for reference only No liability can be accepted for consequences caused by incorrectly displayed heart rates gt For safety reasons the on board computer Nyon does not provide acoustic signals All important information is displayed only as a cross fade Status messages are thereby superimposed on the respective op erating modes Bosch eBike Systems W 276 001 DPNen 23 9 14 English 6 Safety Warnings for eBikes gt Do not open the drive unit yourself The drive unit is maintenance free and must be repaired only by qualified experts and only with original spare parts This will ensure that the safety of the drive unit is maintained Unauthorised opening of the drive unit will void warranty claims gt Do not open Nyon Opening Nyon can destroy it and void any warranty claims gt Allcomponents mounted to the drive unit and all other components of the eBike drive e g the chainwheel chainwheel seat pedals may be replaced only with identical components or componen
17. view the trips you have made Map You can use this menu item to plan routes and view the remaining range of your eBike Shop You can use this menu item to down load additional map material or pur chase premium features EJ Settings You can use this menu item to create custom screens Custom Screens and custom riding modes Custom Riding Modes and manage your profile Help Under this menu item you will find the FAQ contact details and other information Activities menu item All of your journeys are listed under this menu item When you select a journey you will be shown the trip distance the trip duration the average speed and also the route travelled on a map The elevation profile of your eBike journey will also be displayed W 276 001 DPNen 23 9 14 Bosch eBike Systems English 39 Map menu item When you have selected this menu item your current location will be shown using the GPS function of the smartphone You can use the signpost symbol in the top right corner to start route planning You can use the Enter Destination menu item to enter a destination address Once you have entered the destination you will be offered three different routes SHORT SCENIC and FAST displaying the elevation profile The SHORT route shows you the shortest connection from your loca tion to your selected destination The SCEN
18. IC route shows you the most scenic connection from your location to your selected destination and avoids main roads The FAST route shows you the fastest connection from your location to your selected destination while avoiding steeper slopes The different SHORT SCENIC and FAST routes may be identical on short routes Once you have selected your preferred route you can transfer the route to your Nyon by pressing the button at the top right There you can start navigation or just save the route for later In addition to route planning you will find your previously saved destina tions and routes Starting from your current location you can also navigate home or to work Bosch eBike Systems W 276 001 DPNen 23 9 14 English 40 Shop menu item You can use the Shop menu item to download additional map material or add premium features to the functionality of your Nyon Navigation Licences amp Offline Maps You can use this menu item to download additional map material to your smartphone for free There are maps available for all countries Maps for large countries may be split into multiple regions Another menu item enables you to expand the routing from the pre set limitation of 20 km around your place of registration to individual coun tries Europe and the entire world Note When downloading the maps ensure that your internet connec tion is stable and as fast as possible
19. Restart the system If the problem per sists contact your Bosch eBike dealer Bosch eBike Systems W 276 001 DPNen 23 9 14 English 50 Code Cause Corrective Measure 540 Temperature error The eBike is outside of the permissible temperature range Switch off the eBike system and allow the drive unit to either cool down or heat up to the permissible temperature Restart the system If the problem persists con tact your Bosch eBike dealer 550 An improper load was Remove load Restart the system If detected the problem persists contact your Bosch eBike dealer 602 Internal battery pack Unplug the charger from the battery error while charging pack Restart the eBike system Plug the charger into the battery pack Ifthe problem persists contact your Bosch eBike dealer 602 Internal battery pack Restart the system If the problem per error sists contact your Bosch eBike dealer 603 Internal battery pack Restart the system If the problem per error sists contact your Bosch eBike dealer 605 Battery pack tempera The eBikeis outside of the permissible ture error temperature range Switch off the eBike system and allow the drive unit to either cool down or heat up to the permissible temperature Restart the system If the problem persists con tact your Bosch eBike dealer 605 Battery pack tempera Unplug the charger from the battery ture error while charg pack Allow the battery pack to cool I
20. age English 42 Reset Trip This option can be used to reset the trip meter calories burned and all average values to 0 W 276 001 DPNen 23 9 14 Bosch eBike Systems English 23 Operating mode Map amp Navigation gt Make sure to not be distracted by the display of the on board com puter If you do not focus exclusively on the traffic you risk being in volved in an accident If you want to make entries in your on board com puter other than switching the assistance level stop and enter the appropriate data gt For safety reasons the on board computer Nyon does not provide acoustic signals All important information is displayed only as a cross fade Status messages are thereby superimposed on the respective op erating modes gt Do not use the navigation in safety critical situations road clo sures diversions etc Always carry with you extra maps and means of communication Via this operating mode you can access map material and navigate The map material suitable for the place of residence is installed by the bike dealer for the respective buyer If required additional maps can be down loaded via your smartphone application Bosch eBike Connect and be transferred to your on board computer When you switch on Nyon it begins the satellite search to receive GPS signals Once sufficient satellite signal is found the operating mode displays Map amp Navigation of the current loc
21. ation In case of unfavoura ble weather conditions or locations the satellite search may take a little longer Pressing the joystick 1 to the right enables you to choose from the follow ing options Navigate You can use this option to start a navigation within a radius of 20 km from your place of registration Provided you have purchased the corre sponding routing licences navigation is possible with the entire map material located on Nyon You can use the Enter Address menu item to enter the destination address To do so use the joystick to select the letters from the list and confirm each selection by pressing the joystick Once you have entered the destination you will be offered three different routes SHORT SCENIC and FAST displaying the elevation profile Bosch eBike Systems W 276 001 DPNen 23 9 14 English 24 The SHORT route shows you the shortest connection from your loca tion to your selected destination The SCENIC route shows you the most scenic connection from your location to your selected destination and avoids main roads The FAST route shows you the fastest connection from your location to your selected destination while avoiding steeper slopes The different SHORT SCENIC and FAST routes may be identical on short routes Navigation will start once you have selected your preferred route Route planning can also be performed using t
22. ce level is stored the motor output indicator r4 remains empty Bosch eBike Systems W 276 001 DPNen 23 9 14 English 34 Switching the Push Start Aid On Off With the speed version the push aid can also be used as a start aid The start aid is switched off at 18 km h The push start aid can make it easier for you to push or start the eBike The speed of this feature depends on the selected gear and depending on the model can reach a maximum of 6 km h or 18 km h The lower the selected gear the lower the speed of this function at full capacity gt The push start aid function may only be used when pushing or starting the eBike If the wheels of the eBike have no contact with the ground when using the push aid then there is risk of injury To switch on the push start aid press and hold the WALK 16 button on the operating unit The eBike drive is switched on The push start aid is switched off if one of the following occurs you release the WALK 16 button the wheels of the eBike are blocked e g by actuating the brakes or impacting against an obstacle the speed exceeds 6 18 km h Switching bike lights on off In the model in which the lighting is powered by the eBike system the front and rear light can be switched on and off at the same time via the on board computer with the button 6 The illumination symbol s1 is displayed when the light is on Switching the bike light on and off has no e
23. ease observe the instructions in section Transport page English 53 Subject to change without notice W 276 001 DPNen 23 9 14 Bosch eBike Systems Robert Bosch GmbH Bosch eBike Systems 72703 Reutlingen GERMANY www bosch ebike com W 276 001 DPNen 2014 09 T 55
24. em 02 e cece cece eee een eens Map menuitem 3 ce cas steers bd che ed Oa wba en 46 Settings menuitem 0 ccc eee cece cence eee nee 46 Bosch eBike Systems W 276 001 DPNen 23 9 14 4 Device Information ccecceccecceecescesceece 47 Technical Data ee een oe oe ee 47 Error Code Indication eee e eee eee ee een eee eee 48 Maintenance and Cleaning 0 c cece een ence eee 52 After sales Service and Application Service 8 52 Transport nr RR 53 Disposal W 276 001 DPNen 23 9 14 Bosch eBike Systems English 5 Safety Notes General Safety Rules Read all safety warnings and all instructions Failure to follow the warnings and instructions may result in electric shock fire and or serious injury Save all safety warnings and instructions for future reference The term battery pack used in these operating instructions irrespective of model refers both to standard battery packs battery packs with holder on the bike frame and to rack type battery packs battery packs with holder in the rear rack carrier gt Make sure to not be distracted by the display of the on board com puter If you do not focus exclusively on the traffic you risk being in volved in an accident If you want to make entries in your on board com puter other than switching the assistance level stop and enter the appropriate data gt Do not
25. ere you can configure the Home button automatically set the counters such as trip meter calories burned and average values to O every night or reset Nyon to the factory settings W 276 001 DPNen 23 9 14 Bosch eBike Systems English 29 Status display You are shown status indicators in addition to the displays of your current operating mode Depending on the operating mode shown all status indicators are not al ways displayed Indicators already shown on the main screen will not be shown again If the on board computer is taken out of its holder the charg ing state of the Nyon battery of the on board computer is displayed in place of the bike lights indicator sifl s3 s4 Bs5 s6 s7 s8 s9 EI s1 s2 s3 s4 s5 s6 s7 s8 s9 Bike lights indicator Charge level indicator of Nyon battery pack Clock display Speed display North display Bluetooth WiFi connection display Assistance level display Charge level indicator of the eBike battery pack GPS signal display Zoom range remaining range display Bosch eBike Systems W 276 001 DPNen 23 9 14 English 30 Energy supply of the on board computer If the on board computer is in the holder 4 a sufficiently charged eBike battery pack is inserted into the eBike and the eBike system is turned on then the Nyon battery pack is powered by the eBike battery pack If the on board computer is removed from the holder 4 the energy is sup plied via the
26. f ing the problem persists contact your Bosch eBike dealer 606 External battery pack Check the wiring Restart the system error If the problem persists contact your Bosch eBike dealer W 276 001 DPNen 23 9 14 Bosch eBike Systems English 51 Code Cause Corrective Measure 610 Battery pack voltage Restart the system If the problem per error sists contact your Bosch eBike dealer 620 Charging error Replace the charger Contact your Bosch eBike dealer 640 Internal battery pack Restart the system If the problem per error sists contact your Bosch eBike dealer 655 Multiple battery pack Switch off the eBike system Remove errors the battery pack and reinsert it Restart the system If the problem per sists contact your Bosch eBike dealer 656 Software version error Contact your Bosch eBike dealer so that he can perform a software up date No Internal error of the Restart your eBike system by switch display on board computer ing it off and back on Bosch eBike Systems W 276 001 DPNen 23 9 14 English 52 Maintenance and Cleaning Please observe the operating and storage temperatures of the eBike com ponents Protect the drive unit on board computer and battery against ex treme temperatures e g from intense sunlight without adequate ventila tion The components especially the battery pack can become damaged through extreme temperatures An abrupt change of environ
27. ffect on the back lighting of the display W 276 001 DPNen 23 9 14 Bosch eBike Systems English 35 Displays and settings of the Bosch eBike Connect smartphone application Activities Activitie 4 My A Map Ko My w Shop my Help A smartphone is not included in the delivery To register with the smart phone internet connection is required which depending on the contract can generate costs at your telephone provider For the synchronization of data between the smartphone and online portal an Internet connection is also required Bosch eBike Systems W 276 001 DPNen 23 9 14 English 36 Activating the Bosch eBike Connect application In order to be able to use all features of your Nyon it is necessary to have a smartphone with the Bosch eBike Connect application Proceed as follows to perform activation Open Google Play Android or the App Store iOS on your smart phone Search for Bosch eBike Connect Install the Bosch eBike Connect application and open it Register as described in the next section If you have already registered via the online portal you can also log in directly with your login data The Bosch eBike Connect application will then search for an available Nyon on board computer If necessary insert your Nyon into the holder and follow the instructions to establish the Bluetooth connection W 276 001 DPNen 23 9 14 Bosch eBike S
28. he Bosch eBike Connect ap plication and in the online portal ni _ Zz openhagener Str n2 A n1 Clock n2 Map n3 Zoom level n4 Compass needle n5 Turn instructions and distance to the next turn n6 Distance to destination n7 Estimated time of arrival at destination W 276 001 DPNen 23 9 14 Bosch eBike Systems English 25 Battery Range This option enables you to view the battery range as a circle on the map Zoom Out Zoom In You can use this option to change the level of zoom The zoom settings for the map section can also be changed by repeatedly pressing the joystick During the navigation the guidance e g turn left in 50 meters will also be displayed via a cross fade in other operating modes Navigation within a radius of 20 km of the place of registration is free of charge For the release of a larger area you can acquire the appropriate licenses via your Bosch eBike Connect smartphone application Nylon is not suitable for a navigation without a bicycle for hikers or motorists At temperatures below 0 C the altitude measurement may be faulty Bosch eBike Systems W 276 001 DPNen 23 9 14 English 26 Operating mode Fitness Via this mode you can view various fitness related information Based on the activity level provided in your registration the effect of your activities will be displayed on your stamina level training effect
29. he KBA German Federal Motor Transport Authority The number of rescued trees d5 is calculated from the CO emissions saved when you travel with the eBike instead of a car If you press the joystick to the right you can select the observation period d2 You can choose from Total Year Month and Week whereby the calculation for Total includes all journeys since registration Under d6 you can see the distance travelled by the rider who logged into the Nyon based on the time period d2 Bosch eBike Systems W 276 001 DPNen 23 9 14 English 22 Operating mode Ride This operating mode provides current journey data r4 r5 r1 Clock r2 Own pedal power grey r3 Speed r4 Engine power blue yellow r5 Assistance level indicator r6 Trip meter r7 Average speed r8 Coverage r9 Charge level indicator of the eBike battery pack Pressing the joystick 1 to the right enables you to choose from the follow ing options Cust Riding Modes Custom Riding Modes This option is a premium feature which can be activated by purchasing it The settings of the configuration data are made using the Bosch eBike Connect application on a smartphone see Settings menu item page English 42 Custom Screen The settings of the configuration data are made using the Bosch eBike Connect application on a smartphone see Settings menu item p
30. hen preparing the item for ship ping Dispatch battery packs only when the housing is undamaged Tape or mask off open contacts and pack up the battery pack in such a manner that it can not move around in the packaging Inform your parcel service that the package contains dangerous goods Please also observe the possiblity of more detailed national regulations Incase of questions concerning transport of the battery packs please refer to an authorised Bosch eBike dealer The Bosch eBike dealers can also pro vide suitable transport packaging Bosch eBike Systems W 276 001 DPNen 23 9 14 English 54 Disposal The drive unit on board computer including operating unit bat tery pack speed sensor accessories and packaging should be dis posed of in an environmentally correct manner Do not dispose of eBikes and their components into household waste Only for EC countries According to the European Guideline 2012 19 EU elec trical devices tools that are no longer usable and ac cording to the European Guideline 2006 66 EC defec tive or used battery packs batteries must be collected separately and disposed of in an environmentally correct manner The integrated battery pack in the on board computer may only be re moved for disposal Opening the housing shell can destroy the on board computer Please return battery packs and on board computers that are no longer us able to an authorised bicycle dealer Li ion Pl
31. isk of high personal liabil ity costs and possibly even criminal prosecution in the event of acci dents attributable to manipulation gt Please observe all national regulations on registering and using eBikes gt Please read and observe the safety warnings and instructions en closed in the operating instructions of the battery pack as well as in the operating instructions of your eBike Bosch eBike Systems W 276 001 DPNen 23 9 14 English 8 Congratulations Congratulations on purchasing the first all in one eBike computer Nyon is an eBike controller navi and fitness trainer in one and also per forms smartphone functions First all in one eBike on board computer with separate operating unit eBike navigation fitness and internet functions Bike optimised navi with moving map in 2D and 3D Bluetooth connection to a heart rate monitor possible Multiple fitness functions Updates The Nyon s range of functions is continually being expanded Keep your Bosch eBike Connect smartphone application up to date You can use this application to download new functions and transfer them to your Nyon W 276 001 DPNen 23 9 14 Bosch eBike Systems English 9 First steps Joystick Button Home On board computer Holder for on board computer On Off button for on board computer Bike lights button Brightness sensor USB port Protective cap of USB port OnNnOoahwWNH
32. ke Bosch eBike Systems W 276 001 DPNen 23 9 14 English 18 Initial Operation of the On board Computer The battery pack is supplied partially charged Before the first use the Nyon battery pack must be fully charged viathe USB port see Energy sup ply of the on board computer page English 30 or the eBike system In order to use all the features of the operating system you must also reg ister online Registration at the On board Computer Switch on the on board computer using the On Off button 5 Use the joystick 1 to select your preferred language select by pressing the joystick and follow the instructions You have the following options to put Nyon into operation Test Ride You can perform a test ride without having to register in advance or to enter data After shutting down all trip data will be deleted Start Demo Aself running sequence performs the main features of Nyon including Dashboard Ride screen Navigation and Fitness screen Several values are simulated The demo mode starts again after about 2 5 minutes and can be terminated at any time by pressing any key Continue without account setup This is a very short registration process limited to Nyon Offline means in this case that your journey and user data are only saved locally on the on board computer Follow the instructions and choose one of the suggested answers Entered data is kept after shutting Nyon down but
33. mental conditions can cause the screen to fog up from inside After a short time a temperature adjustment takes place and the fog disappears Keep the screen of your Nyon clean Dirt can cause faulty brightness detec tion The day night switch over in the navigation mode can be distorted Keep all components of your eBike clean especially the battery pack con tacts and corresponding holder contacts Clean them carefully with a soft damp cloth All components including the drive unit may not be immersed in water or cleaned with a high pressure cleaner gt Trouble shooting actions may be performed by the owner except those explicitly noted as Contact your Bosch eBike dealer After sales Service and Application Service In case of questions concerning the eBike system and its components please refer to an authorised Bosch eBike dealer For contact data of authorised Bosch eBike dealers please refer to www bosch ebike com W 276 001 DPNen 23 9 14 Bosch eBike Systems English 53 Transport The battery packs are subject to the Dangerous Goods Legislation require ments Private users can transport undamaged battery packs by road with out further requirements When being transported by commercial users or third parties e g air transport or forwarding agency special requirements on packaging and labelling must be observed e g ADR regulations If necessary an expert for hazardous materials can be consulted w
34. nglish 14 Operating logic For security reasons Nyon does not have atouch screen A change in the display can be achieved during the journey via the operating unit 10 This way both hands can stay on the handlebars while cycling With the control elements on the on board computer you have the follow ing options Switch the on board computer on or off using the On Off button 5 The default mode of operation in Settings gt My Nyon can be reached via the Home 2 or 12 button The bike lights can be switched on or off using the bike light button 6 Use the joystick 1 to navigate through the respective operating modes Make a selection by pressing the joystick 1 Dashboard Press left on the joystick 1 to overlay the active operating mode with the main menu and to switch it to the main menu see picture above If you press the joystick 1 right while in the active operating mode the cur rent screen is overlayed with the potential configuration options of the cur rent operating mode Move the joystick to the desired option and select it by pressing the joystick 1 Tip If you are in an active operating mode you can switch directly to the next operating mode by pressing the joystick 1 up or down If Nyon is on the eBike Ride is displayed after switching on the operating mode If Nylon is not mounted on the eBike Dashboard is displayed on the operating mode W 276 001 DPNen 23 9 14 Bosch eBike S
35. nts you can only select the performance assistance The speed is plotted on the horizontal x axis and the performance assistance on the vertical y axis in percent If you are happy with the def inition save the riding mode If there is an ex isting Bluetooth connection the riding mode will then be automatically transferred to the Nyon My Nyon An existing Bluetooth connection to Nyon is required to display this section The section shows information about the on board computer synchronisation can be performed the current Nyon can be deleted and another Nyon can be connected to Help menu item In the Help menu item you will find a selection of FAQs frequently asked questions contact details and information about licences terms and con ditions and data protection Bosch eBike Systems W 276 001 DPNen 23 9 14 English 44 Displays and settings of the online portal Online registration Internet access is required for online registration Use your browser to open the Bosch eBike Connect online portal at www eBike Connect com Read and accept the terms and conditions and the privacy policy Follow the instructions and complete the registration According to the answers you give about the typical frequency and duration of your sporting activities you will be assigned to an activity level which is re quired for the Fitness operating mode When you have registered f
36. rom this point on you can log in with your e mail address and password or via Log in with Facebook The login da ta of the online portal matches the login data of the Bosch eBike Connect smartphone application An existing Facebook account is required for Log in with Facebook W 276 001 DPNen 23 9 14 Bosch eBike Systems English 45 Online portal main menu Symbol Menu item Function Dashboard Statistical data are shown under this menu item Activities Under this menu item you can view the trips you have made Map You can plan routes via this menu item Settings You can use this menu item to create custom views and manage your pro file Dashboard menu item This operating mode shows you the savings d4 you can make if you ride the bike instead of driving a car Basis for the calculation is the average energy cost of fuel and electricity Activities menu item All of your eBike journeys are listed under this menu item When you select a journey you will be shown the trip distance the trip duration the aver age speed and also the route travelled on a map You can also view the el evation profile Bosch eBike Systems W 276 001 DPNen 23 9 14 English 46 Map menu item You can also perform your route planning in the online portal Under the Plan Route menu item you can enter a start and destina tion address Once you have en
37. rt rate you can use a heart rate monitor which you can connect to Nyon via Bluetooth Connect the heart rate monitor to your Nyon in the Settings menu under Connections using the Heart Rate Monitor menu item When the menu item has been selected your Nyon will automatically search for a device When Nyon has found your heart rate monitor select it and follow the instructions gt Please also observe the instructions in the owner s manual from your heart rate monitor manufacturer The compatible heart rate monitors are listed in the table below Manufacturer Compatible heart rate monitors Polar H7 W 276 001 DPNen 23 9 14 Bosch eBike Systems English 21 Operation Displays and configurations of the on board computer Operating mode Dashboard This operating mode offers you statistical data 2i d5 Trees preserved d1 Clock d2 Observation period d3 Costs d4 Savings d5 Saved trees d6 Total distance of cyclist This operating mode shows you the savings d4 you have made when not using a car but rather the eBike Basis for the calculation is the average energy cost of fuel and electricity The costs for the eBike are calculated from its power consumption or the costs for recharging the battery at the previous year s average electricity tariff The petrol price or the average consumption is based on data from the IEA International Energy Agency and from t
38. tered the destination you will be offered three different routes SHORT SCENIC and FAST displaying the elevation profile The SHORT route shows you the shortest connection from your location to your selected destination The SCENIC route shows you the most scenic connection from your location to your selected destination and avoids main roads The FAST route shows you the fastest connection from your location to your selected destination while avoiding steeper slopes The different SHORT SCENIC and FAST routes may be identical on short routes Once you have selected your preferred route you can save it and then plan other routes In addition to route planning you will find your previously saved destina tions and routes Settings menu item Under Settings you can adjust your profile request a new password adjust your fitness status change the registered address and the work address Note You cannot change the registered address as often as you want W 276 001 DPNen 23 9 14 Bosch eBike Systems English 47 Device Information Technical Data On board computer Nyon Article number 1270020907 Max charging current USB connection mA 500 Charging voltage USB connection vV 5 Operating temperature sC 5 40 Storage temperature C 10 50 Charging temperature C 0 40 Degree of protection IP x7 watertight Weight
39. ting mode Fitness 2 2 0 0c cece cece Soei iet kaea 26 W 276 001 DPNen 23 9 14 Bosch eBike Systems Operating mode Settings 0 0 cece eee e eee ee aee 28 Status display ersi 2 2 2a ead Sead iii aka thas 29 Energy supply of the on board computer 0 0005 30 Resetting Nyon 30 Battery Charge control Indicator 0 ccc c eee e eens 31 Setting the Assistance Level 0 c cece eee e eee nee 32 Switching the Push Start Aid On Off 0 eee eee 34 Switching bike lights on off 0 0 cece cece cece e eee 34 Displays and settings of the Bosch eBike Connect smartphone applica TON res HA a yes 35 Activating the Bosch eBike Connect application 36 Registration via smartphone and Bluetooth connection 37 Main menu of Bosch eBike Connect 2 2222020 38 Activities menuitem 0 ccc eee eee een eens 38 Map menuitem a eaten eis ele E 39 Shop menuitem 40 Transferring the maps to Nyon 0 cee eee e cece eee 40 Settings menuitem 0 cece cece eee eee en 42 Help menuitem vu a eek 43 Displays and settings of the online portal 2222222 44 Online registration 222c2eseeeeeeeeeeeeeneneeeeeeenennn 44 Online portal main menu 00 e cece cece eee eee nee Dashboard menuitem Activities menuit
40. ts specifically approved for your eBike by the bicycle manufacturer This protects the drive unit against overload and damage gt Remove the battery pack from the eBike before beginning work e g inspection repair assembly maintenance work on the chain etc on the eBike transporting it by car or plane or storing it Un intentional activation of the eBike system poses a risk of injury gt The eBike system can switch itself on when the eBike is pushed backwards gt The push start aid feature may only be used when pushing or start ing the eBike There is danger of injury if the wheels of the eBike do not have ground contact while using the push start aid feature gt Use only original Bosch battery packs approved for your eBike by the manufacturer Using other battery packs can lead to injuries and pose a fire hazard When using other battery packs Bosch shall not assume any liability and warranty W 276 001 DPNen 23 9 14 Bosch eBike Systems English 7 gt Donot make any modifications to your eBike system or fit any other products which would be suitable for increasing the performance of your eBike system This normally reduces the lifetime of the system and risks damage to the drive unit and the bike There is also a risk of los ing the guarantee and warranty claims on the bike you have purchased By handling the system improperly you are also endangering your safety and that of other road users thus running the r
41. ur local smartphone memory 23 directly into the Nyon cache memory The map is then available for navigation Downloading the maps to Nyon This function is available only when Nyon is connected to a WLAN net work For this reason connect to a WLAN network in order to have access to the internet Select the Map Manager menu item under Settings Map amp Naviga tion on your Nyon Select the desired maps and download them If required the Nyon will transfer the saved maps from its main memory 22 to its cache memory 21 The map is then available for navigation Transferring the maps from the internet via a smartphone If Nyon requires maps and they are not located in the local memory 21 22 or in the smartphone memory 23 Nyon will automatically establish an internet connection via the smartphone and load the required data into its cache memory 21 The map is then available for navigation Bosch eBike Systems W 276 001 DPNen 23 9 14 English 42 Settings menu item You can use the Settings menu item to make extensive settings for and changes to the personal profile the eBike and the Nyon My Profile The personal data collected by registration are contained here These data can be adjusted expanded and corrected here If there is a Bluetooth link present these data are automatically synchro nised Here you can also set up your Bosch eBike Connect login via Face book
42. will not be synced to the online portal or smartphone application When subsequently performing a complete registration the data col lected up to that point is available for a limited time W 276 001 DPNen 23 9 14 Bosch eBike Systems English 19 Create anew account or use existing gt Setup via smartphone This is acomplete registration process Insert Nyon in the holder 4 download the application Bosch eBike Connect to your smartphone and register using the application Following registration the journey data are stored and synchronized with the smartphone application and the online portal Create anew account or use existing gt Setup via Wi Fi This is a complete registration process Connect Nyon via USB toa power supply e g computer and ensure you are in a WLAN network access area Nyon then connects to the WLAN network of your choice and you will be directed to the www eBike Connect com online portal where you can complete the registration Following registration the journey data are stored during riding and synchronized with the online portal Aconnection to your smartphone can be created from your Nyon when registration has been completed Settings gt Connections gt Connect new smartphone Bosch eBike Systems W 276 001 DPNen 23 9 14 English 20 Connecting a heart rate monitor to Nyon A heart rate monitor is not included in the delivery To check your hea
43. ystems English 15 Main Menu Symbol Operating mode Function Dashboard This operating mode offers you statistical data Ride This operating mode provides current journey data Map amp Navigation Via this operating mode you can access map material and navigate ES Fitness Via this mode you can view various fitness related information EJ Settings This operating mode allows you to set the basic configurations of your on board computer Bosch eBike Systems W 276 001 DPNen 23 9 14 English 16 Initial Operation Requirements The eBike system can only be activated when the following requirements are met Asufficiently charged eBike battery pack is inserted see operating instructions of the battery pack Theon board computer is properly inserted in the holder see Inserting and removing the on board computer page English 17 Switching the eBike System On Off Options for switching on the eBike system Place the on board computer into the holder 4 When the on board computer and the eBike battery pack are inserted briefly press the On Off button 5 of the on board computer When the on board computer is inserted press the On Off button of the eBike battery pack see battery pack operating instructions The drive is activated as soon as you step on the pedals except when in the push aid feature see Switching the Push Start Aid On Off
44. ystems English 37 Registration via smartphone and Bluetooth connection Start the Bosch eBike Connect application Select REGISTER Read and accept the terms and conditions and the privacy policy Switch the on board computer on using the On Off button 5 to set up the Bluetooth connection Select SEARCH on your smartphone The application will try to find your on board computer and will display it once the search has been successful If your on board computer is not found ensure that Blue tooth is activated on your on board computer You can view this set ting under Settings gt Connections gt Bluetooth On Perform the Bluetooth link by checking and confirming the code dis played on your on board computer Once the link has been successfully established press Continue and start collection of your personal data Follow the instructions and complete the registration According to the answers you give about your fitness level you willbe assigned to a fitness category which is required for the Fitness operating mode If the application Bosch eBike Connect is active and there is a Bluetooth connection to your on board computer data between on board computer and smartphone will sync automatically Bosch eBike Systems W 276 001 DPNen 23 9 14 English 38 Main menu of Bosch eBike Connect Symbol Menu item Function Activities Under this menu item you can

Nyon operating instructions

Contents

Download Pdf Manuals

Related Search

Related Contents