Installation and operation manual
Contents
1. winter day below 0 and has been left outside we recommend that it is left for a couple of hours in room temperature before start up Take good care of the cabinet Only use a damp cloth with a mild detergent when cleaning the cabinet Never use solvent to clean the display Once a year cleaning We recommend that the area around the fan the heat pump condenser and the evaporator is cleaned thoroughly once a year Be careful so that the lamellas on the heat pump compo nents are not damaged IMPORTANT Always switch off the electricity before start ing to work with the cabinet Keep your cabinet efficient and econom ical e The ventilation channels shall be as short as possible e If possible dry the same type of textiles at the same time e Clean the lint filter regularly e Keep the heat pump unit free from dust 25 OPODAB 2013 Notes PODAB 2013 26 27 PODAB 2013 SERVICE SUPPORT Phone 46 31 752 01 00 Fax 46 31 752 01 50 E mail client podab com www podab com vw PODAB AB PODAB Ekonomivagen 9 436 33 Askim SWEDEN Tel 46 0 31 752 01 00 Fax 46 0 31 752 01 50 E post sales podab se www podab se PODAB 2013 09 112. Installation and operation manual Drying cabinet TS 63 VP ss PODAB Thank you for choosing this drying cabinet TS 63 VP from PODAB We hope that it will be of great use for you and ask you kindly to read the instructions carefully IMPORTANT FOR YOUR SAFETY the information in this manual must be followed to prevent property damage and personal injury NOTE The paragraphs marked WARNING and CAUTION appearing in this manual are not meant to cover all possible conditions and situations that may occur It is very important that water and electricity are handled with great care and respect by both installation technicians and end users PODAB 2013 2 Contents Safety regulations Important safety instructions Specification Dimensions Technical information Assembly instructions Installation of the cabinet Step 1 Put the cabinet in place Step 2 Fasten the cabinet to the wall Step 3 Connect condensate pipe Step 4 Connect the drying cabinet to the main switch User manual Automatic programs Select drying time manually Maintenance Installation during winter Take good care of the cabinet Once a year cleaning Keep your cabinet efficient and economical Notes 20 20 21 22 23 24 24 24 25 29 29 29 29 26 PODAB 2013 Safety regulations Throughout this manual you will find text warnings in text box es WARNING and CAUTION In these boxes you ll f
3. abinet is leveled horizontally and vertically NOTE We recommend that the cabinet is installed on a firm and leveled floor Please observe that there must be at least 50 mm of free space above the cabinet in order to perform service Narrow spaces If the cabinet must be transported through narrow spaces we recommend that you take off the doors first It will simplify the handling and reduces the risk for damages on the doors PODAB 2013 20 Step 2 Fasten the cabinet to the wall Use the stoppers screws and washers to secure the cabinet through the back plates Fastening holes are pre drilled in the back plates vs PODAB NOTE Please control that the cabinet is leveled and cannot be tilted 21 PODAB 2013 Step 3 Connect condensate pipe The condensate drain pipe can be installed into a standpipe with siphon inserted through a hose elbow in a sink or intro duced in a floor drain The dimensions of the pipe is 12 17 x 2500 mm IMPORTANT Make sure that the condensate drain hose is carefully installed without traction of any kind If the hose is installed too tightly and is being pulled it may develop kinks or sharp bends and the cabinet will no longer be able to lead the water successfully through the hose into the drain PODAB 2013 22 Step 4 Connect the drying cabinet to the main switch To prevent that fire and electric shock appear the cabinet MUST be connected according to the colo
4. ectrical con nections must be done by authorized personnel Keep after the cabinet If it is exposed for violence there is a risk that certain security functions will stop working Please contact your nearest service partner if you are un sure of the cabinet s status If the electrical cable is damaged it must immediately be changed by a person with electrical authorization The doors shall always be shut when the cabinet is in use Don t try to manipulate the lock of the doors It can lead to personal injuries If the cabinet doesn t stop when the doors are opened during the drying phase call for service The cabinet shall not be used if the drying program is ac tive when the doors are open To get the best drying result follow the garments washing amp drying advice Never use the cabinet if any panel is broken or removed Never use the cabinet if any parts are broken or if the inside is broken Never try to manipulate or connect past any safety func tions lf the cabinet isn t assembled after the manufacturer s in structions there is a risk that the cabinet can cause per sonal injuries or injuries on property PODAB 2013 Specification Dimensions 1995 1200 350 A Electrical connection B Exhaust PODAB 2013 6 Technical information Loading capacity kg Ib Drying capacity g min oz min mm Electrical connection 3 N 400 V 50 Hz Energy consumption kWh
5. ind the safety measurements you ll have to take end user service staff or installation staff Indicates hazardous situation that if not avoided could cause severe personal injury You will also find precautions marked IMPORTANT and NOTE These are followed by information of what should be consid ered IMPORTANT to inform the reader of special steps that must be taken in order to prevent injuries on the cabinet NOTE to inform what is important to know but it cannot cause personal injuries or injury on the cabinet PODAB 2013 Important safety instructions To minimize the risk of fire electrical shock personal injuries or death when the cabinet is in use the following precautions must be followed 10 11 12 13 14 19 16 17 Read the instruction before using the drying cabinet Follow the installation instructions for proper grounding Never dry textiles that have been washed dipped or ex posed to fire dangerous substances or fluids Never add fire dangerous or explosives substances in the cabinet The cabinet is not a toy Look after the children who are around the cabinet Never connect the cabinet with an extension cable Only use the cabinet for what it is designed for drying clothes Always turn off the main switch before performing any ser vice on the cabinet Only authorized service technicians should perform service Always follow the installation manual The el
6. kg 0 25 0 11 KWhY lb Drying of 6 kg 13 2 Ib cotton dry weight washed and high spinned to 43 residual moisture Dried to 0 residual moisture 7 PODAB 2013 Assembly instructions Tools You need the following tools to easily install the drying cabinet e Cordless screwdriver e Wrench e Hex key 5mm e Level e Torx screwdriver bit no 25 Time for assembly is approximately 1 hour PODAB 2013 8 9 PODAB 2013 10 PODAB 2013 r PODAB 2013 11 PODAB 2013 12 13 PODAB 2013 PODAB 2013 14 Lam 5 NTI ED 0 Humidity sensor cable Relay board gt program board 15 PODAB 2013 23 Connect cables to program board BL HUMIDITY PODAB 2013 16 17 PODAB 2013 28 Connect cables in numerical order N mM lt LO O I 1 I x1 01 1 11 gt lt gt lt gt lt gt lt gt lt gt lt PODAB 2013 Make sure cables are out of the way 19 PODAB 2013 Installation of the cabinet Step 1 Put the cabinet in place Place the cabinet with enough space in front of the cabinet and on the sides to be able to open the doors The feet of the cabinet can be adjusted from the inside with the help of a Hex key The feet must stand free on the floor and have an even weight distribution Use a leveler and control that the c
7. r codes on the cables Only an authorized electrician is allowed to install the electrical con nection The cabinet is prepared for one of the following electri cal connections depending on specification IMPORTANT The drying cabinet must be connected in the correct phase sequence in order to start TS 63 VP is equipped with a phase sequence protection relay A green light will be lit on the relay when the sequence is correct The drying cabinet is prepared for 400V 3 N 50Hz It is always the buyer that has the responsibility to check that an authorized electrician makes the electrical connections of the cabinet To prevent personal injuries the cabinet shall always be con nected permanently through an all pole main switch Always ground the cabinet Also check that the connecting cable has a strain relief bush ing If not there is a risk that the cabinet will be live 23 PODAB 2013 User manual Fill the cabinet To get the best drying result dry the same type of material at the same time Never fill the cabinet with more than 8 kg laundry dry weight Close the doors The cabinet will not start until the door is completely closed Keypad 1 Display 2 Program select 3 Increase time 4 Start stop Program fast forward during drying Select program Change program by pushing program select button 2 The symbol of the chosen program gets highlighted and the pro gram name is showed on
8. the screen Start program Push start stop button button 4 in order to start the drying cabinet Pause program To pause a working programme open the doors The cabinet will continue to run for one minute before it stops Close the doors and push the start button to continue drying Cancel program To cancel a working program push the start stop button Clean the lint filter Check the lint filter after usage Clean when needed The filter can be removed for easier handling PODAB 2013 24 Automatic programs The drying cabinet is equipped with the function HTS Humidity Tracking System This function is activated in the au tomatic program mode The drying time adjusts to the laundry in the cabinet To choose automatic program TS 63 VP has four automatic programs PN x diz PIN ML 2 IRON DRY For laundry to be ironed SLIGHTLY DRY For laundry that will not be ironed or only lightly ironed CABINET DRY For laundry that will not be ironed EXTRA DRY For particularly thick fabrics Select drying time manually O TIMED DRYING The cabinet has a timed drying program for the user who prefers to set the time manually Set the time The default drying time when entering Timed drying program is 0 15h Increase the drying time with the plus button The drying time can be increased to a maximum of 4 00h Maintenance Installation during winter If the cabinet is installed on a cold
Download Pdf Manuals
Related Search