CB-100 LED Color Beam LED spotlight user manual
Contents
1. ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To change the menu item without making any adjustment press MODE ESC Press MODE ESC repeatedly until the display shows tCxx The display shows the current tem perature of the LED Press MODE ESC to quit the menu LED spotlight 26 System reset Loading defaults Overview main menu Operation Press MODE ESC repeatedly until the display shows rESt Press ENTER to reset the colour wheel to its default position Press MODE ESC repeatedly until the display shows LoAd Press ENTER to reset all values to the factory default settings En gt DM EEE EEE En Em EPE CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 27 Operation 7 3 Settings menu Press MODE ESC for about three seconds to activate the settings menu Use UP or DOWN to enter the units password 2323 You can change the digit on the cursor position using the UP button Use the DOWN button to move the cursor to the next position Press ENTER when all digits have been set Press MODE ESC for about three seconds to quit the settings menu All previously done settings will be saved and retained even when the device is disconnected from the mains power Colour wheel Activate the settings menu Press MODE ESC repeatedly until the display shows Cxxx Use the UP or DOWN button to set the desired default p2. CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 31 Operation Channel th mann MUSIC IS OUR PASSION 32 Valu 72 80 88 96 104 112 120 128 192 e 79 87 95 103 111 119 127 191 255 Shutter 0 3 4 7 8 2 15 Function Dark blue and yellow Yellow and pink Pink and green Green and red Red and light blue Light blue and orange red Orange red and white Rainbow effect counter clockwise increasing speed Rainbow effect clockwise increasing speed Closed Open Strobe effect increasing speed LED spotlight Channel Value 216 255 Functions 0 10 11 60 61 110 111 160 161 210 211 255 Operation Function Open No function Blackout while colour wheel is rotating Sound control Blackout while colour wheel is rotating and sound control Reset the colour wheel Reset all channels CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 33 Technical specifications 8 Technical specifications LED 10 W high power LEDs Number of DMX channels 4 Dispersion angle De Operating supply voltage AC 230V 50Hz AC 110 V 60 Hz Power consumption 35 W Dimensions W x D x H 280 mm x 350 mm x 280 mm Weight 3 0 kg themann LED spotlight MUSIC IS OUR PASSION 34 Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to co
3. the DMX controller is switched on Check the DMX ports and cables for proper connection 2 If the dot is flashing but still without any response check the address settings and DMX polarity 3 Try using another DMX controller 4 Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or inter ference to DMX interface circuits If the procedures recommended above do not succeed please contact our Service Center You can find the contact information at www thomann de CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 37 Cleaning 11 Cleaning Optical lenses Clean the exterior of accessible optical lenses periodically to optimise light output The fre quency of cleaning depends on the operating environment wet smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device Clean with a soft cloth using normal glass cleaning products MH Always dry the parts carefully themann LED spotlight MUSIC IS OUR PASSION 38 Protecting the environment 12 Protecting the environment Disposal of the packaging mate rial For the transport and protective packaging environmentally friendly materials have been chosen that can be supplied to normal recycling Ensure that plastic bags packaging etc are properly disposed of Do not just dispose of these materials with your normal household waste but make sure that they are
4. 001 Now the device is operational CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 23 Operation 7 2 Main menu th mann MUSIC IS OUR PASSION Press MODE ESC for about 3 seconds to activate the main menu Press MODE ESC again to select amenu item Use UP and DOWN to change the respectively displayed value When the display shows the desired value press ENTER To return to the main menu without any changes press MODE ESC If you don t press any button for about 20 seconds the display turns off Then briefly press MODE ESC to turn it on again All previously changed setting are being stored and retained even if you disconnect the device from the mains To restart the device with standard values use the LoAd function Loading defaults on page 27 LED spotlight 24 Operation DMX address Press MODE ESC repeatedly until the display shows dxxx Now you can set the number of the first DMX channel to be used by the device DMX address Use UP and DOWN to select a value between 1 and 512 display shows d007 d512 When the display shows the desired value press ENTER to confirm the selection and then MODE ESC to proceed to the next menu item To change the menu item without making any adjustment press MODE ESC Make sure that this number matches the configuration of your DMX controller The highest possible DMX address is 509 Manual colour sett
5. ASSION NOTICE Risk of overheating Always ensure sufficient ventilation The ambient temperature must always be below 40 C 104 F NOTICE Use of stands When mounting the device onto a stand ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand LED spotlight 14 Installation NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 15 Starting up 5 Starting up Establish all connections as long as the unit is switched off Use the shortest possible high quality cables for all connections themann LED spotlight MUSIC IS OUR PASSION 16 Starting up Connections in DMX mode Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device Connect the output of the first DMX device to the input of the second one and so on to form a daisy chain Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor 1100 1 4 W 2 cco n CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 17 Starting up DMX indicator When the unit is in DMX mode a flashing dot in the display indicates a
6. S TRIIR CB 100 LED Color Beam LED spotlight th mann user manual MUSIC IS OUR PASSION Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany Telephone 49 0 9546 9223 0 E mail info thomann de Internet www thomann de 08 04 2013 Table of contents na vu BF WN 10 Table of contents GOT AN OCS iain cass adiecs cscs sdvassdeccatnssscchseceapdedctesactad nach anbaatathdcasbsctas besadevasd ct sacesadatiasdldeasesslensbecuseenstisy 5 Safety iNstructiOns eecsscssssssssscssecsssecssseessscessseecssccsssccesscesssecsssesssscessscesateesscecsuccssceceseessueeesseessees 8 Features nosna naan aaa a AN A E AA AI AKA AERA 12 Installation R Starting UP unenenenesesenseunsenssessenneen Connections and operating elements Operating 7 1 Starting up the device T2 Mali menl see Eileen nl a rr aAa i E 7 3 Settings menu 7 4 Functions in 4 channel DMX mode Technical specifications cccccesssssssssssssssssssesssesssssssssscsssessesssscsscsssessucssssencssscsssessssnsesseesseessesses 34 Plug and connection assignMent cccssccssscsssscsescsscecseceseecsnscessecsnscesseecsscesuecssecesneeeseesees 35 Troubleshooting usssseenssnnnsennsssunsesnnssensssnunsennssnnnsennsssunsssnnssennssnnssennssensssnnsssunsssnnnnenn 36 CB 100 LED Color Beam th mann MUSIC IS OUR PASSION Table of contents 11 CVG RUMI sa ae a A ARR E a 38 12 Protectin
7. collected for recycling Please follow the notes and markings on the packaging Disposal of your old device This device is subject to the European directive 2002 96 EC Do not dispose of the device with your normal household waste Dispose of this device through an approved waste disposal firm or through your local waste facility When discarding the device comply with the rules and regulations that apply in your country If in doubt consult your local waste disposal facility CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 39 Notes themann LED spotlight MUSIC IS OUR PASSION 40 Notes CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 41 Notes themann LED spotlight MUSIC IS OUR PASSION 42 Musikhaus Thomann e K Treppendorf 30 96138 Burgebrach Germany www thomann de
8. device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric shock or fire CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 11 Features 3 Features th mann MUSIC IS OUR PASSION 12 This device is especially suitable for use on show stages Special features of the device Control via DMX four channels as well as via buttons and display on the unit Sound control Colour wheel with white seven full colours split colours and rainbow effect Electronic dimmer Overheat protection Shutter frequency 0 20 Hz LED spotlight Installation 4 Installation Unpack and carefully check that there is no transportation damage before using the unit Keep the equipment packaging To fully protect the device against vibration dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage respectively You can install the device on the wall ceiling or floor A mounting bracket and the necessary screws are included in the package WARNING Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country Always secure the device with a secondary safety attachment such as a safety cable or a safety chain CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 13 Installation themann MUSIC IS OUR P
9. eneral notes Warning signs Type of danger Warning suspended load Warning danger zone CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 7 Safety instructions 2 Safety instructions Intended use This device is intended to be used as an electronic illumination effect using LED technics Use the device only as described in this user manual Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage No liability will be assumed for damages resulting from improper use This device may be used only by persons with sufficient physical sensorial and intellectual abilities and having corresponding knowledge and experience Other persons may use this device only ifthey are supervised or instructed by a person who is responsible for their safety DANGER Danger for children Ensure that plastic bags packaging etc are disposed of properly and are not within reach of babies and young children Choking hazard Safety Ensure that children do not detach any small parts e g knobs or the like from the unit They could swallow the pieces and choke Never let children unattended use electrical devices themann LED spotlight MUSIC IS OUR PASSION Safety instructions DANGER Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present Never remove any covers There are no us
10. er serviceable parts inside DANGER Electric shock caused by short circuit Always use proper ready made insulated mains cabling power cord with a pro tective contact plug Do not modify the mains cable or the plug Failure to do so could result in electric shock death or fire If in doubt seek advice from a regis tered electrician CB 100 LED Color Beam th mann MUSIC IS OUR PASSION Safety instructions WARNING Eye damage caused by high light intensity Never look directly into the light source WARNING Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy Sensitive persons should avoid looking at strobe lights NOTICE Risk of fire Do not cover the device nor any ventilation slots Do not place the device near any direct heat source Keep the device away from naked flames themann LED spotlight MUSIC IS OUR PASSION 10 Safety instructions NOTICE Operating conditions This device has been designed for indoor use only To prevent damage never expose the device to any liquid or moisture Avoid direct sunlight heavy dirt and strong vibrations NOTICE Power supply Before connecting the device ensure that the input voltage AC outlet matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker Failure to do so could result in damage to the device and possibly injure the user Unplug the
11. g the environment nnenennnsennnseennseennnsennnssennnssennnsennnnennnnsnnnnsnennnsnennne 39 themann LED spotlight MUSIC IS OUR PASSION 4 1 General notes Symbols and signal words General notes This user manual contains important information on safe operation ofthe device Read and follow all safety notes and all instructions Save this manual for future reference Make sure that it is available to all persons using this device If you sell the device include the manual for the next owner Our products are subject to a process of continuous development We therefore reserve the right to make changes without notice This section provides an overview of the symbols and signal words used in this user manual CB 100 LED Color Beam th mann MUSIC IS OUR PASSION General notes Signal word DANGER WARNING NOTICE Warning signs A themann LED spotlight MUSIC IS OUR PASSION Meaning This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided This combination of symbol and signal word indicates a possible dangerous situation that can result in death or serious injury if it is not avoided This combination of symbol and signal word indicates a possible dangerous situation that can result in material and environmental damage if it is not avoided Type of danger Warning high voltage G
12. ing Press MODE ESC repeatedly until the display shows NAn Press ENTER to activate the oper ating mode Press UP or DOWN until the display shows Colr Press Enter again the display shows Coxx Now use UP and DOWN to select from 18 colour settings display shows C000 Co17 When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To change the menu item without making any adjustment press MODE ESC CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 25 Operation Dimmer setting Display reversal Temperature display themann MUSIC IS OUR PASSION Press MODE ESC repeatedly until the display shows MAn Press ENTER to activate the oper ating mode Press UP or DOWN until the display shows diMM Press Enter again the dis play shows Lxxx Now use UP and DOWN to adjust the brightness display shows L000 1255 When the display shows the desired value press ENTER to confirm the setting and then MODE ESC to proceed to the next menu item To change the menu item without making any adjustment press MODE ESC Press MODE ESC repeatedly until the display shows diS Now use UP and DOWN to toggle between rdiS display text is shown upside down and dIS display text is shown normally When the display shows the desired value press
13. n incoming DMX signal Otherwise perhaps the DMX controller is shut down or the wiring is not correct themann LED spotlight MUSIC IS OUR PASSION 18 Connections and operating elements 6 Connections and operating elements Bottom side CB 100 LED Color Beam Connections and operating elements 1 CONTROL PANEL Display 2 MODE ESC button Activates the main menu and toggles between menu items Closes an opened submenu without saving the changes UP button Increases the displayed value by one DOWN button Decreases the displayed value by one ENTER button Selects an option of the respective operating mode confirms the set value Bracket for hanging or setting up 3 4 5 6 7 themann LED spotlight Locking screw for the bracket MUSIC IS OUR PASSION 20 Connections and operating elements Top side th mann 0 am m 2 e U m u je ch U Connections and operating elements 10 12 13 Bracket for hanging or setting up Locking screw for the bracket INPUT DMX input OUTPUT DMX output Fuse holder Safety eye IEC chassis socket for the power supply cable to the next unit IEC chassis connector for the mains power connection themann LED spotlight MUSIC IS OUR PASSION 22 Operation 7 Operation 7 1 Starting up the device Connect the unit to the power grid to start operation After a few seconds the display shows d
14. nnect your valuable equip ment so that a perfect light experience is guaranteed Please take our tips because especially in Sound amp Light caution is indicated Even if a plug fits into a socket the result of an incorrect connection may be a destroyed DMX controller a short circuit or just a not working light show DMX connections The unit offers a 3 pin XLR socket for DMX output and a 3 pin XLR plug for DMX input Please refer to the drawing and table below for the pin assignment of a suitable XLR plug Pin Configuration 1 Ground shielding 2 Signal inverted DMX cold signal 3 Signal DMX hot signal CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 35 Troubleshooting 10 Troubleshooting NOTICE Possible data transmission errors For error free operation make use of dedicated DMX cables and do not use ordi nary microphone cables Never connect the DMX input or output to audio devices such as mixers or ampli fiers In the following we list a few common problems that may occur during operation We give you some suggestions for easy troubleshooting themann LED spotlight MUSIC IS OUR PASSION 36 Troubleshooting Symptom Remedy The unit does not work no light Check the mains connection and the main fuse No response to the DMX con 1 If the dot behind the DMX channel indicator is not troller flashing in the display the unit does not receive a valid DMX signal Make sure that
15. osition for the display of two colours display shows C000 C255 When the display shows the desired value press ENTER to confirm the settings and then MODE ESC to proceed to the next menu item To change the menu item without making any adjustment press MODE ESC th mann LED spotlight MUSIC IS OUR PASSION 28 Operation Brightness Activate the settings menu Press MODE ESC repeatedly until the display shows Lxxx Use the UP or DOWN button to set the desired default brightness display shows L000 1255 When the display shows the desired value press ENTER to confirm the settings and then MODE ESC to proceed to the next menu item To change the menu item without making any adjustment press MODE ESC Temperature monitoring Activate the settings menu Press MODE ESC repeatedly until the display shows Ptxx Use the UP or DOWN button to set the temperature at which the overheat protection should be triggered display shows Pt50 Pt99 CB 100 LED Color Beam th mann MUSIC IS OUR PASSION 29 Operation Overview settings menu themann LED spotlight MUSIC IS OUR PASSION 30 Operation 7 4 Functions in 4 channel DMX mode Channel Value Function 1 0 255 Dimmer 2 Colour wheel 0 7 White 8 15 Dark blue 16 23 Yellow 24 31 Pink 3239 Green 40 47 Red 48 55 Light blue 56 63 Orange red 64 71 White and dark blue
Download Pdf Manuals
Related Search