JNVR User Manual
Contents
1. lm eo Region Alarm Input Enable Alarm Input Detecting Address 1 255 4 Port com 1 Y Baud Rate 2400 ka NG 0 Default Apply ta All The user could select Start Record Alarm When Alarm Detected Snapshot When Alarm Detected E Map Pop up When Alarm Detected to receive the alarm info in time And the alarm output delay time is defaulted 10 seconds Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System Channel Setting Record Setting Alarm in Alarm Out Email Alert Setting User Management System Alarm Lasting Time k U 173600 Second Start Record Snapshot When Alarm Detected Alarming Ahen Alarm Detected E Map Pop up hen When Alarm Detected Alarm Out Enable Alarm Qut Address 1 255 I Port com 1 i Baud Rate 2400 Np 0 Detautt Apply To All Note Alarm output of video lost does not support Snapshot When Alarm Detected or Start Record 2 4 4 Email Alert Setting As Enable Video Lost Detecting or Enable Motion Detect choose Sending Email When Alarm Detected then can get alarm information while alarming Email Alert Setting enter Receiver Email ID If several Receiver separating Receiver Email ID by After setup complete click Send Test E mail to check if the mail can be sent or not If the mail was intercepted by anti virus software please close the anti virus software and restart the procedure C2. IP camera can be manually modified the maximum support of 16 characters Channel Mame HD IFC OSD Location Down lett 4 4 3 Video Covering This JNVR supports operator to set video covering area Check Enable Masking and click Region then the following dialog box will appear Copyright Jovision Technology Co Lid User Manual for Jovision JNVR System Refresh Operator can move mouse to select and set covering area If he click right button the selected area will be cancelled 4 5 Motion Detection This JNVR supports motion detection function Check Enable Motion Detect and click Region to select and set detection area If detection area is not set it will acquiesce full screen area is detected After the motion detection area is successfully set it will be automatically applied on IP camera Sensitivity default is 60 The greater the number is the higher the sensitivity is Motion Detection Enable Motion Detect Sensitivity 4 eo Region 4 6 Video Loss Alarm The JNVR software supports video loss alarm When network is connected successfully and IP camera s image is cut alarm will be triggered At present the output of video loss alarm supports sound playing electronic map appearing and E mail alarm Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System 4 7 Network Connection When IP camera is added successfully it will b
3. and click the button 2 3 2 Modify Device Connection Parameters The monitoring picture of network camera added and normal connecting will be shown in the i main preview interface Right click the picture to pop up the menu Start Record Stop Record Snapshot System Contig Remote Contig Image Control FIZ Control Modify Channel Remove Channel Snapshot Viewer System Logs Alert Map Restore Conti guration About JHVE The introduction of functions in the menu Function Instruction Start Record Start the local recording of the channel Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System Stop Record Stop the local recording of the channel Snapshot Capture the image of responding channel video source System Config Set the channel alarm input output store and system environment and so on Remote Config Set up the parameter of network camera remotely Image Control Adjust the image brightness contrast saturation of one channel or all channels Modify Channel Change network user account of the connecting network camera Snapshot Viewer Manage the images manual or alarm captured System logs JNVR software operation log and alarm info Restore Configuration Restore JNVR software default setting About JNVR JNVR software version info Remote Setting Function We advise users to modify the password of the network camera as
4. soon as users get the product Select Remote Config to pop up the network camera menu GSO S a system stream Storage Accounts Network PTZ Click System to manage the network user including add user modify password and delete user If the user modify the password of super user abc then other users can t connect using the user abc After modification please remember the password well If you forget the password please offer the serial number of the tip to our customer service staff And you will get the responding temporary password After modifying the password successfully right click the channel and select Device Config And then input the new password and click OK to connect again Device Contig CloudSsEEe ID Login ID Pass yyord Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System Click Network to pop up the dialog box Hetwork IF Metmask Gateway DMS MAC E0 62 90 F 5 90 98 DHCP function of network camera is default enabled Unable the function and input static IP address and other network parameters and click OK Then the modification will be applied to the network camera 2 3 3 Delete Device The monitoring image will be cut if the user deletes the device The network camera in Device Discovered List could be removed if the user click button in the middle of Device T5 Management button to remove all cameras Users al
5. voice email alert and Jovision alarm module 36 pcs of Jovision IP cameras can be added to JNVR Supports various layouts Supports dragging and switching channels Supports window Pop up Supports sequencing of single channel and four channels Auto adjusts to the size of screen Two GUI can be chosen by users to meet user s different favorites 1 2 Operation Requirement Operation System Windows 7 windows XP Windows 2003 PC Configuration Its suggested using current popular PC configuration Note The More Jovision IPC added to the JNVR system the higher PC hardware configuration needed Copyright Jovision Technology Co Lid User Manual for Jovision JNVR System 2 Operation and Usage 2 1 Login When running JNVR the system main interface is as below NVR System NVR System NVR System NVR System Locked 2013 02 18 09 37 41 et 9 Y veh O S oo Record All Record None Playback Click the Button on the down right and then the main control panel can be popped up or hidden according to the mouse movement The main control panel is as follows _User abc 2013 02 18 09 37 59 wf y Ee BS e oO Record All Record None Playback Clicking Login Icon Login following box can be popped up Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System Jovision NVR System Login V Remember Password Lock Cancel Default Username abc Default Passwo
6. Split 16 Split 22 Split 25 Split 2T Split 33 Split 36 Tour of Single Screen Tour of Four Sereen Popcup Sereen The software provides a variety of screen splits and will automatically adjust the number of them according to the number of the user s video source Support two ways of sequence single screen and quad screen one Support float window when it open 2 9 Minimize amp Exit Jovi s10n Click will minimize window Click the desktop shortcuts bili taskbar icon will maximize the window Click O and will get Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System Jovision NVR System Login V Remember Password Lock Cancel Input the user name and password and click ok then exit program k 3 Main preview 3 1 Non sequence preview Display images automatically after adding the devices Switch to the appropriate number of split screens according to the number of the devices 3 2 Sequence preview Click Layout and choose single screen sequence or quad screen sequence all the channels will be showed 3 3 Image status Each connected IP camera will be as a monitory point When see the video by JNVR the icon 9 will be showed at the right bottom of the picture When the IP camera start motion detection and send the alarm to the user the icon A will be showed at the right bottom of the picture Copyright Jovision Technology Co Ltd Use
7. User Manual for Jovision JNVR System JNVR User Manual Jovision Technology Co Ltd http www jovision com Phone 0086 531 55691778 Email info jovision com Copyright Jovision Technology Co Lid User Manual for Jovision JNVR System Contents COMEM Saaier EE A EEE EEEE 2 te PINE OC UC OM eset saec cess eatactGcvacasecesccacecauscssuesvasececaussasecseccecs soussccscssacesesusecceucseasececevecesecassuaseeed 3 TiAl BOT MUO GUCTI ea 3 12 Operation Reguremne Ni oem anemia oem ba need 3 Der Operation ANG USAGE ics aas 4 2h MOG IM apscemae do sans dn sects soecustan dn eisectaaanst ENA 4 222 IMMLeTACE Isle Fe le 5 ZO PROG ID CVIC CS yi cricesi sneha i aloes etonaeeas ntsc advert teconanstea aeteea aceaa ueese aeeces 6 2A OVEM Se VUNG ana a uae ges oie tet e an 9 2 5 Manual Recording Record All Record None ccccscccccceessseeeeeeesnees 16 isn LAI AG tia eee aes fase cae est a aces noha Ma ate tea E te baa Mane aaa aa Ni aS cae eae 17 2 MAD S MOL knee eee hae rae alia 18 EUe e rene erence tr rece rerntmt eet eran rrcemenr Tt Tor eeer rr E tt ree 18 ZO MINIMIZE SCE a 19 3e Man previ OW cexicsrsacccassecevencesasveceasesevavavacetaewes cee ccovauesseusesvesecsasweoeees odeaseuaeesuaveateessuuseeceecuate 20 S INOMSECGHEACE DRC VICW 2 ata iauasesccsatesrdeeose seemmstoseanes 20 32 DEGUENICE DIC VICW aenn E N TONE 20 e MAGS Sal S een a oa eee eee 20 4 Image conp ura ON TTT 21 A N Inea e ONO T 21 A AVA eT TTT 21 A 3 R
8. and still not searched by JNVR please check whether or not the connection between computer and internet is correct then connect computer with IP camera and finally use JNVR search IP camera Copyright Jovision Technology Co Lid
9. cation according to demand 4 8 3 Video Management Our company s JVS N71A Bullet IP camera supports SD local record video And the video recording can be started or stopped by manual The SD s space usage also is viewed 4 8 4 User Management There are three grades user permissions in IP camera The relevant user can be added changed or cancelled according to demand Each grade user has relevant operation permission when connected with IP camera 4 8 5 Network Management The network connection mode can be selected among network wire DHCP PPPOE and WIFE In order to realize multiple network connection modes our company s other products are recommended to be purchased Copyright Jovision Technology Co Lid User Manual for Jovision JNVR System 5 FAQ FAQ1 after device is added successfully the connection status is Connection time out Answer IP camera is connected successfully while it shows Connection time out The reason maybe is that network specification of IP camera doesn t match with JNVR Because IP camera s IP address should is reconcilable with actual networks For example one IP camera which can normally work in 192 168 0 0 network DHCP function is not enabled will have connection time out phenomenon in 192 168 1 0 network In this case please check whether or not the network connection is correct and then confirm the IP camera s IP address is reconcilable with actual networks FAQ2 A
10. e Setting to upgrade IP camera and manage network For detailed setting methods please refer to user manual of Jovision IR IP camera Specific functions are in below 4 8 1 System Management The IP camera has some functions such as autotimer device name modification restart recovery system network upgrade and local upgrade etc If IP camera is connected with internet network upgrade is recommended If IP camera works in local area network LAN please contact Jovision to get relevant upgrade files For operating instructions please refer to user manual of Jovision IR IP camera 4 8 2 Stream Management There are three kinds of streams on our company s IP cameras High definition stream is applied on local HD high definition video It makes camera high definition display at single image or less split screens Standard definition makes camera standard definition display at great many split screens The internet stream is applied on mobile phone and other equipments It guarantees image is smooth Area covering function hides some areas in video This function also be realized at preview or recording Operator can set relevant area to be hidden in video according to demand Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System IP camera supports motion detection alarm Image adjustment function can adjust specification at contrast luminance and saturation Operator can adjust IP camera s relevant specifi
11. e shown at the added equipment list CloudSEE ID Channel Status Channel 01 A366 Connecting There are many kinds of connection statuses which indicate status between JNVR software and IP camera If IP camera is connected successfully it will appear Already connected While if connection is failed it will shows Connection timeout When IP camera is being connected it will appear Connecting If there is mistake at password it will show Password error Double click Device dialogue box of video source setting will appear and then click Device Config the below dialog box will appear Device Config CloudSee ID Login ID Password OK Network Exit Click Network it will appear below dialog box Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System Hetwork IP Netmask Gateway DMS MAC E0 62 90 F 5 90 98 When parameter modification is finished this modification will be applied on IP camera 4 8 Remote Setting The IP camera is a kind of standalone and embedded device It can be connected with CloudSEE network monitor system Jovision CC security management system Jovision WebCC network video monitor system or other our company s CloudSEE software And operator can also implement relevant remote setting through above software When IP camera is connected with JNVR successfully right click image and select Remot
12. ecord hel 21 Amae eT U 22 4S Moton DCC CHON staan eisai eas ei ete eae 23 AO VIGO LOSS Pile Mi Wieseetesesac sett cetera alee oete tice N 23 4 7 NEWOIKCONNECHO a na a 24 48 REMO SEINO D 25 Se FAO ennonn n A A O O E O O A 27 Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System 1 Introduction 1 1 Brief Introduction Jovision Network Video Recording System is the PC Host end software developed for Jovision IP camera The JNVR is used mainly for Local Area Network LAN and can achieve centralized management centralized previewing centralized recording With Jovision JNVR IP cameras in LAN can be added to JNVR system with just one key and then following functions can be fulfilled conveniently Parameter Setting Video Previewing Recording Records Playback etc Features User friendly GUI Easy to use and easy for operation Centralized management centralized previewing and centralized recording for Jovision IP cameras One key Searching and one key adding Jovision IP cameras One key starting and one key stopping recording Video adjustment in JNVR for Jovision IP cameras Supports Jovision IP camera setting remotely With JNVR Jovision IP cameras can be full controlled Supports Manual Recording Scheduled Recording and Alarm Recording Supports Video Lost Detection Motion Detection and Jovision Alarm Detection Supports alarm output in the methods of snapshot recording
13. fter device is added successfully and connection status is Connected image is not displayed Answer After connection status is connected while there is no image in JNVR The reason maybe is that IP camera is using low version software The resolution ratio of the latest version IP camera s stream is 16 9 While old version camera is 720P D1 or CIF When simultaneously set N71A IP camera and N71B IP camera at JNVR it will be in chaos When JNVR is used to manage IP cameras it is advised to upgrade IP camera to the latest version FAQ3 Click Change Password gt Set Network it doesn t appear dialog box of network setting Answer When network is not good and click Set Network the dialog box of network setting doesn t appear timely Please try it later or restart the IP camera FAQ4 OSD name of IP camera shows HD IPC 01 Answer When set channels at JNVR click default setting to modify relevant channel IP camera OSD into HD IPC indicate channel serial number to differentiate IP cameras The Default OSD of IP camera is HD IPC FAQ5 Double click image why it is switched from standard definition to high definition Answer In order to reduce CPU occupied by main control computer of JNVR when there are great many split screens the standard definition stream will be used While when it is switched from many split screens to single screen the standard definition stream resolution ratio will be switched into high def
14. inition stream resolution ratio In this way it will automatically adjust to split screen and make video recording and video displaying smooth to support much more channels video be displayed Copyright Jovision Technology Co Lid User Manual for Jovision JNVR System FAQ6 After IP camera s password is changed the changed password is forgotten Answer For the first time use it is suggested to change IP camera s user name and password Default user name is abc and default password is 123 User should remember changed user name and password If user forgets changed user name and password and connection is failed JNVR s relevant window will show error sequence number At this time user should contact with our company s customer service staff and offer error sequence number to them in order to get temporary password After user use temporary password to login please change password in time and remember it FAQ7 IP camera is not searched at Searched Equipment List Answer The old version IP camera maybe is not searched by JNVR when use JUNVR software to manage IP cameras In this case please ensure the IP camera is the latest one If it is old version IP camera which is not upgraded after purchased please connect it with internet and choose website upgrade User also can contact with our company s customer service staff to get the latest version IP camera software to upgrade them It it is the latest version IP camera
15. o Ltd User Manual for Jovision JNVR System Snapshot pictures Save directory can be E JdvrFile CapFile E is hard disk of Snapshot PC Functions of Split Tour Pop up Login Dialog box Minimize the system Exit the system 2 3 Add Devices 2 3 1 Add devices Click the Icon Devices lanang eseni Devices Discovered Devices Connected CloudtSEE ID CloudSEE ID _ Channel Status Devices Discovered means the IP cameras have been discovered in the LAN Search button is for searching the IP cameras The buttons of gt gt gt lt lt lt are for Add Add All Delete Delete All of the IP cameras Manually button is for adding Jovision IP cameras in WAN Wide Area the following dialog box shall be popped up Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System Device Contig CloudSeEEe ID Login ID Pass yyord ik Metyvwork Exit Input the CloudSEE ID of the IP camera and click OK Note When the IP camera is added successfully the video of the IP camera shall be played on the according channel The channel No in the list is according the channel No of the host end If we want to change the channel position of the IPC please just enable the function of Allow User to Switch Video Position and then drag the channel to the position that we want If we want to disconnect the video choose the device in the Devices connected
16. opyright Jovision Technology Co Lid User Manual for Jovision JNVR System Channel Setting Record Setting Alarm In Alarm Gut Email Alert Setting User Management System Sending Email When Alarm Detected Receiver Email ID Seperate Receiver Email ID by T Intervale Minute 5 Send Test E Mail Defautt Apply to All 2 4 5 User Management Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System Channel Setting Record Setting Alarm In Alarm Out Email Alert Setting User Management System System User Username ane Username Passyvord Add User Delete User Change User User Power Devices Settings Record Remote Setting Playback Layout Image Control Snapshot Management CloudSEE Service PTZ Control Audio Monitor Exit This User Management is local user management manage JNVR User Name and Password Enter User Name and Password choose corresponding user power click Add User Support non login modifying and deleting operation of System User Choose a Username from System User Click Delete User to delete the user Choose a Username from System User re enter User Name and Password at the right textbox click Change User to change User Name and Password 2 4 6 System System setting options are as follows Copyright Jovision Technology Co Lid User Manual for Jovision JNVR System Channel Setting Record Setting Ala
17. r Manual for Jovision JNVR System 4 Image configuration 4 1 Image control To satisfy with each user personal requirement the software support the manual adjustment of image parameter Right click the image choose Image control will show Default The user can adjust image by himself Choose Apply to AllJ and adjust brightness contrast saturation then click ok Exit The adjustment effect will apply to all IP cameras 4 2 Image quality Image quality depends on resolution and video quality resolution decides image clarity video quality decides image delicateness Frame rate decides image fluency High resolution and video quality require a large network bandwidth and high hardware configuration of the computer To balance image quality and fluency the user can adjust image parameter Right click image and choose system configuration gt channel setting 4 3 Record plan After adding IP camera and show image successfully the user can do record setting JNVR software support three ways record manual record enable scheduled record alarm record Need manual open to start the manual recording Click record all Choose enable scheduled record and set up record period and it will start record accordingly Choose Alarm out gt start record it will start record when getting alarm and stop automatically based on the length of the delay time the alarm output module As follows are detailed steps Click
18. rd 123 Tick Remember Password and no need to input password for next login After login users can modify the password of user abc or create new user by System Parameter gt User Management gt System User After login the system is defaulted to be locked and user can input password to operate If clicking the button Lock the system shall be locked 2 2 Interface Introduction The system interface is integrated by two parts The above part is for previewing and the below part is for Control Panel If the cursor of the mouse is moved to the Below part the Control Panel shall be popped up and when he cursor of the mouse is moved away from the below part the Control Panel shall be hidden If clicking the button ead the Control Panel shall be fixed and can t be hidden If clicking the button A the previewing zone shall be full screen If clicking the system skin shall be changed Now the system supports two skins The Control Panel has following functions Icons Description Name Devices Search add and delete IP cameras Video shall be shown automatically if added successfully Sande Set the functions of resolution recording alarm etc and also the system i 9 environment can be set here Start recording of all channels Save directory can be E JdvrFile E is hard disk Record All FPC 0 l Record l Stop all the recording None Playback Record search and playback Copyright Jovision Technology C
19. retrieving all channels automatically searching out video files click Channel Starting Time Size kKB can descending or ascending arrange of video files according to channel start time size etc 2 6 2 Playback Control While displaying the video support operation of Pause stop accelerate decelerate screenshot 2 6 3 Save As and Cut File We recommend to backup copy of important files click to make the cop Click L SMLENE 10 cut file pop up as follows Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System File Cutting The point at current progress bar is the first default cut point drag the progress bar to another cut point click to finish the file cutting 2 Snapshot Click can capture pictures of target channel Right click Snapshot Management the pictures of manual snapshot or alarm automatic snapshot will be saved at E JdvrFile CapFile the user choose E as saved harddisk Choose date and channel and click search then will get pictures in the list right side Snapshot Hanagement Date mE 2 18 Channel jan Channel By Month Select All Open Image User Manual Click Search After Selecting Time And Channel Double Click the File to View the Image 2 8 Layout the detailed options as follows Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System split 4 E split Split 9 Split 10 Split 13
20. rm In Alarm Gut Email Slert Setting User Management Yatem Sequence Interval h U 1 60 Second Enabled Scheduled Restart Sunday 00 j j0 7 Auto Lock JNYR System Mon active h U Chinute Suto Run JMR Shutdown the PC When Exiting JAYR System Disable CTRL 4LT DEL Only Supports Vuin2000 XP Allow User to Switch video Position Low Performance PC Mode Choose Enable Scheduled Restart set up fixable automatic restart time While enable this function it will automatically choose Auto Run JNVR Choose Allow User to Switch Video Position choose a screen from main preview interface and press left mouse button drag to another screen to change the display channel When computer hardware configuration is low it will cause displaying not smooth recommend to choose Low Performance PC Mode While connecting with 4ch IPC default to display via HD Stream Resolution 2 5 Manual Recording Record All Record None Click Raaz all normal connecting IPCs enable record recording file will be stored at corresponding folder of JNVR Computer Click Basseleiiei Manual recording and Scheduled Recording both are stopped Copyright Jovision Technology Co Lid User Manual for Jovision JNVR System 2 6 Playback NVR System Select Channe All Channel y Channel Starting Time Size KB NVR System NYR System 2 6 1 Video Retrieve Choose date and corresponding channel default
21. so could remove the camera of the responding channel through clicking Remove Channel in the right click menu in the main preview interface 2 4 System Setting 2 4 1 Channel Setting Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System Channel Setting Record Setting Alarm In Alarm Gut Email Alert Setting User Management System HO Stream For Recording Resolution i 2800 720 Frame Rate 25 ka Bit Rate 3072 kbps SD Stream For Previewing Resolution 574552 Frame Rate 25 ka Bit Rate TBS Kbps Network Stream Resolution 388 208 Frame Fate 15 ka Bit Rate 153 kbps l Enable Previewing le Enable Pop up Enable Masking Channel Name HD IP OSD Location Down lett Default Apply ta All The modifications in JNVR Channel Setting could be applied to all cameras while the modifications in right click menu Remote Config are applied to one network camera only Click one channel set Stream Masking Channel Name Network Camera OSD OSD Location Enable Previewing Enable Pop up and click Apply to All to apply all the settings to all cameras Click OK button to restore the modification or Cancel not to restore it The resolution of all the 3 kinds of stream is 16 9 which is as the same as the camera monitoring image original proportion and the image is much real 2 4 2 Record Setting Copyright Jovision Technology Co Lid User Manual for Jo
22. system configuration gt record setting choose hardisk set the time of files packaged default half an hour According to the actual request choose record way and do operation and setting Enter into video playback to check if record successfully or not Copyright Jovision Technology Co Ltd User Manual for Jovision JNVR System 4 4 Image display The IP camera resolution can be changed automatically according to window size that can reduce decoding burden based on multi screen split HD stream display under windows maximized SD stream display under multi screen split the user can feel the image changing from SD to HD when double click 4 4 1Resolution frame rate video quality HD Stream For Recording Resolution p 280 720 Frame Rate 25 Bit Rate 3072 kbps SD Stream For Previewing Resolution 624352 ka Frame Rate 25 ka Bit Rate srs kbps Network Stream Resolution 2605209 Frame Rate 15 ka Bit Rate 153 kbps Right click image gt Remote configuration gt stream gt video Jand set up image resolution The resolution of HD stream amp SD stream decide the video quality good not the higher numbers of video quality the better image quality 4 4 2 Device OSD To differentiate the different IP cameras conveniently JNVR support named different IP cameras and the default name is in accordance with the channel HD IPC 01 36 which will show at the left bottom The channel name for each
23. vision JNVR System Channel Setting Pecord Setting arin In Alarm Out Email Alert Setting User Management System Store Disks ie T Iw E le F l G Iw H Iw le Jd W K T T IS B p E l IZ g a l l Reserved Disk Space 4000 2000 8000 ME The Disk With More Than 5G Space Packing Time 30 10 600 Minute Disk Space Mot Enough S Overwrite Previous Records f Stop Recording and Reminds Enable Scheduled Record Default Apply ta All Set the record file restoring drive letter here The root folder name of the record file is JdvrFile And the defaulted packing time is 30 minutes Pls select at least 2 store disks and use big hard drive When the disk space is not enough the defaulted solution is to overwrite previous records The record could be started regularly if enable scheduled record Select the record time range which is defaulted whole day Click Apply to All to apply the scheduled record setting to all cameras 2 4 3 Alarm in amp out setting Besides receiving network camera motion detection alarm JNVR supports video lost alarm if the user checks Enable Video Lost Detecting Copyright Jovision Technology Co Lid User Manual for Jovision JNVR System Channel Setting Record Setting Alarm In Atari Cut Email Alert Setting User Management System ideo Lost Detection Enable Wideo Lost Detecting Motion Detection Enable Motion Detect Sensitivity
Download Pdf Manuals
Related Search