Operating Instructions Busch-AudioWorld Busch-iDock 8218 U-500
Contents
1. 4 Operation 4 1 Control elements Operation takes place either using the MP3 player or directly using digital radio 8215 U or 8216 U For the playback of the audio signal it is plugged into the AUX input in the case of Busch AudioWorld devices See the operating instructions of the respective devices 4 2 Apple devices Control operate the IPOD iPhone devices exclusively via the APPLE REMOTE control unit The device is plugged vertically into the charging cradle O Notes Limitation of functions is possible depending on the iPod iPhone generations Regarding the instructions to be observed in connection with the Apple devices we refer to the separately enclosed notice 4 3 Conventional devices The playback of other audio sources is only possible with the connection of a separate cable with a 3 5 mm jack plug line out to the lateral socket line in Operation takes place on the connected device depending on the manufacturer 4 4 Connecting device Fig 1 Options for connecting devices Connections No Function A iDock station for iPod iPhone B Jack socket for a different player Operating Instructions 1473 1 8319 hl Operating Instructions rr Busch AudioWorld Technical data 5 Technical data Designation Value Mains voltage 230 V AC 10 50 60 Hz Line in input stereo jack 3 5 mm Input impedance gt 10 KQ Input level lt 1 V eff Output vo2. Work on the 230V supply system may only be performed by authorised electricians Disconnect the mains power supply prior to installation and or disassembly 2 Intended use The device is part of the Busch AudioWorld system and is to be used exclusively with the components that are supplied and licensed as described in the Structure and Function chapter The device must only be installed in dry indoor rooms 2 1 Environment Consider the protection of the environment Used electric and electronic devices must not be disposed of with domestic waste The device contains valuable raw materials which can be recycled Therefore dispose of the device at the appropriate collecting depot All packaging materials and devices bear the markings and test seals for proper disposal Always dispose of the packaging material and electric devices and their components via the authorized collecting depots and disposal companies The products meet the legal requirements in particular the laws governing electronic and electrical devices and the REACH ordinance EU Directive 2002 96 EC WEEE and 2002 95 EC RoHS EU REACH ordinance and law for the implementation of the ordinance EC No 1907 2006 3 User Manual Detailed information for planning Busch AudioWorld systems is contained in the user manual Download at www Busch Jaeger com Operating Instructions 1473 1 8319 3 Operating Instructions Busch AudioWorld Operation
3. 1473 1 8319 Rev 01 17 12 2012 Busch iDock 8218 U 500 Busch AudioWorld Power and productivity Ab ER Ee PADDED for a better world Operating Instructions Busch AudioWorld 1 Le Ve Eee EEE EE 3 2 imended ME EE EE 3 2 1 Environment 3 3 BET ETC EE 3 4 Operallan ana ea 4 4 1 Gontrolielements 1 ege Eed a a hee ee dee 4 4 2 eege A 4 3 Conventional devices ssesennnnneensennnnnenneirinrnnnreerinrtnsreniirnnnernirinnnnnnerinnnannnerrrinanennnennnnnnnnnennnnnnnnnen eee 4 4 4 Connecting Ee 4 5 AE 0 al ers S EE 5 6 Set pand tie ere E 6 6 1 Features of function and eouipmemt nn 6 6 2 Possible combinations cccceceeeeesesseseseeeeeseseeesseeeeseseseseseseseeeeeseeeeeeeeeeeeeeeeeeeeeeeeeeeeeseeeeseeeeeeeeeeeeeeeeeeees 6 7 instalation and electical COMMECUOMN g 2zs262 ceccesveneectesan stuns ae 7 7 1 Requirements for the electrician 2 cccsececesecccetesceeeereeeeeeeneeneeeeseeeeecaseeeeessneaeenseaeeseeseeeeensiesenmeeneeensecees 7 7 2 General installation instructions cccccessccccceccssessseeeceeceeseuseeeceecensesaseeeeeecesseuseeeeeeseeseeaeeeeeesesseenseeess 7 7 3 MOU IARI BEE 8 7 4 Electrical connection nase ie Bine Ee 9 7 4 1 Installation connection possibilities AA 10 Operating Instructions 1473 1 8319 2 Operating Instructions Busch AudioWorld Safety 1 Safety Warning Electric voltage Risk of death and fire due to electrical voltage of 230 V
4. ductivity AA ED BE for a better world PR ED AD 1473 1 8319 Rev 01 17 12 2012
5. ltage of audio bus 3 Vss Protection type IP 20 Operating Instructions 1473 1 8319 5 Operating Instructions Busch AudioWorld Setup and function 6 Setup and function 6 1 Features of function and equipment The Busch iDock is a playing storage and battery charging unit for iPod iPhone devices When the Apple device is plugged in and active the 3 5 mm jack socket is inactive The Busch flush mounted digital radio 8215 U from software version 2 0 can also be control remote controlled via 8218 U 6 2 Possible combinations X X X 8254 2X x 8254 21X x 8254 8X Operating Instructions 1473 1 8319 Operating Instructions Busch AudioWorld Installation and electrical connection 7 Installation and electrical connection Warning Electric voltage Risk of death due to electrical voltage of 230 V during short circuit in the low voltage line Low voltage and 230 V lines must not be installed together in a flush mounted socket 7 1 Requirements for the electrician Warning Electric voltage Install the device only if you have the necessary electrical engineering knowledge and experience e Incorrect installation endangers your life and that of the user of the electrical system e Incorrect installation can cause serious damage to property e g due to fire The minimum necessary expert knowledge and requirements for the installation are a
6. s 1473 1 8319 40 Operating Instructions Busch AudioWorld Installation and electrical connection 4 Zentrale Trennung der Leitungen R1 amp L1 230 V axis 2x0 75 mm 8218 U 8211 UL 8214 U Fig 6 Integration into Busch AudioWorld 7 Zentrale Trennung der Leitungen R1 amp L1 230 V 20 75 mm Fig 7 System diagram for selective call Operating Instructions 1473 1 8319 lt Operating Instructions Busch AudioWorld A member of the ABB Group Busch Jaeger Elektro GmbH PO box 58505 L denscheid Freisenbergstra e 2 58513 L denscheid Germany www BUSCH JAEGER com info bje de abb com Central sales service Phone 49 0 2351 956 1600 Fax 49 0 2351 956 1700 Notice We reserve the right to at all times make technical changes as well as changes to the contents of this document without prior notice The detailed specifications agreed to at the time of ordering apply to all orders ABB accepts no responsibility for possible errors or incompleteness in this document We reserve all rights to this document and the topics and illustrations contained therein The document and its contents or extracts thereof must not be reproduced transmitted or reused by third parties without prior written consent by ABB Copyright 2012 Busch Jaeger Elektro GmbH All rights reserved Power and pro
7. s follows e Apply the five safety rules DIN VDE 0105 EN 50110 1 Disconnect from power 2 Secure against being re connected 3 Ensure there is no voltage 4 Connect to earth and short circuit 5 Cover or barricade adjacent live parts e Use suitable personal protective clothing e Use only suitable tools and measuring devices e Check the supply network type TN system IT system TT system to secure the following power supply conditions classic connection to ground protective earthing necessary additional measures etc 7 2 General installation instructions Terminate all branches of the wiring system via a connected bus device e g indoor station outdoor station system device Do not install the system controller directly next to the bell transformer and other power supplies to avoid interference Do not install the wires of the system bus together with 230 V wires Do not use common cables for the connecting wires of the door openers and wires of the system bus e Avoid bridges between different cable types e Use only two wires for the system bus in a four core or multi core cable e When looping never install the incoming and outgoing bus inside the same cable Never install the internal and external bus inside the same cable Operating Instructions 1473 1 8319 7 Operating Instructions Busch AudioWorld Installation and electrical connection 7 3 Mounting The flush mounted inser
8. t must only be installed in flush mounted wall boxes according to DIN 49073 1 Part 1 or suitable surface mounted housings Busch iDock is mounted as shown below 1 First the flush mounted insert is connected 2 Then after the cover frame separate has been attached the charging cradle is connected to the flush mounted insert with the enclosed M3 screw 3 Finally the cover plate A Separate is attached to the charging cradle Fig 2 8218 U 8254 xxx A 2511 XXX 1721 xxx B No Function j Screw 1 LED IR Operating Instructions 1473 1 8319 8 Operating Instructions Busch AudioWorld Installation and electrical connection 7 4 Electrical connection Fig 3 Circuit diagram for i Dock No Assignment R Right channel e Dimensions L Left channel D Synchronisation with flush mounted radio 8215 U 8216 U switchover to iPod N 230 VAC 10 L Operating Instructions 1473 1 8319 9 Operating Instructions Busch AudioWorld Installation and electrical connection 7 4 1 Installation connection possibilities H Fig 4 Use with Dock Connector or MP3 player OU sl No Function A Dock Connector Apple interface B MP3 player 3 5 mm external line in out Fig 5 Integration into Busch AudioWorld with the 8215 flush mounted radio No Function A 8218 U B 8215 U Operating Instruction
Download Pdf Manuals
Related Search